Ready for the 7.3-RELEASE builds to begin.

Approved by: re (implicit)
Merge r205400:
2026-10-30 04:15:06 +01:00 · 2010-03-21 01:03:49 +00:00 · 2010-03-21 00:05:29 +00:00 · 2010-03-20 16:39:28 +00:00 · 2010-03-20 14:57:24 +00:00 · 2010-03-20 14:36:39 +00:00
6333 changed files with 205679 additions and 749582 deletions
@@ -4,7 +4,7 @@
 The compilation of software known as FreeBSD is distributed under the
 following terms:

-Copyright (c) 1992-2013 The FreeBSD Project. All rights reserved.
+Copyright (c) 1992-2010 The FreeBSD Project. All rights reserved.

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions
@@ -3,7 +3,7 @@ $FreeBSD$
 Please note that the content of this file is strictly advisory.
 No locks listed here are valid.  The only strict review requirements
 are granted by core.  These are documented in src/LOCKS and enforced
-by svnadmin/conf/approvers.
+by CVSROOT/approvers.

 The source tree is a community effort.  However, some folks go to the
 trouble of looking after particular areas of the tree.  In return for
@@ -129,7 +129,6 @@ gnu/usr.bin/send-pr	bugmaster	Pre-commit review requested.
 BSD.{local,x11*}.dist	portmgr	Pre-commit review requested, since these files interface with ports.
 usb		core	Please contact core@ before any major changes
 ncurses		rafan	Heads-up appreciated, try not to break it.
-isci(4)		jimharris	Pre-commit review requested.

 Following are the entries from the Makefiles, and a few other sources.
 Please remove stale entries from both their origin, and this file.
@@ -21,7 +21,7 @@
 # check-old-dirs      - List obsolete directories.
 # check-old-files     - List obsolete files.
 # check-old-libs      - List obsolete libraries.
-# delete-old          - Delete obsolete directories/files.
+# delete-old          - Delete obsolete directories/files/libraries.
 # delete-old-dirs     - Delete obsolete directories.
 # delete-old-files    - Delete obsolete files.
 # delete-old-libs     - Delete obsolete libraries.
@@ -57,7 +57,7 @@
 #  6.  `mergemaster -p'
 #  7.  `make installworld'
 #  8.  `make delete-old'
-#  9.  `mergemaster'		(you may wish to use -i, along with -U or -F).
+#  9.  `mergemaster'                         (you may wish to use -U or -ai).
 # 10.  `reboot'
 # 11.  `make delete-old-libs' (in case no 3rd party program uses them anymore)
 #
@@ -139,12 +139,10 @@ buildworld: upgrade_checks
 #
 # In the following, the first 'rm' in a series will usually remove all
 # files and directories.  If it does not, then there are probably some
-# files with file flags set, so this unsets them and tries the 'rm' a
+# files with chflags set, so this unsets them and tries the 'rm' a
 # second time.  There are situations where this target will be cleaning
 # some directories via more than one method, but that duplication is
-# needed to correctly handle all the possible situations.  Removing all
-# files without file flags set in the first 'rm' instance saves time,
-# because 'chflags' will need to operate on fewer files afterwards.
+# needed to correctly handle all the possible situations.
 #
 BW_CANONICALOBJDIR:=${MAKEOBJDIRPREFIX}${.CURDIR}
 cleanworld:
@@ -272,9 +270,9 @@ make: .PHONY
 # existing system is.
 #
 .if make(universe)
-TARGETS?=amd64 arm i386 ia64 pc98 powerpc sparc64
+TARGETS?=amd64 arm i386 ia64 pc98 powerpc sparc64 sun4v

-universe: universe_prologue upgrade_checks
+universe: universe_prologue
 universe_prologue:
 	@echo "--------------------------------------------------------------"
 	@echo ">>> make universe started on ${STARTTIME}"
@@ -285,7 +283,7 @@ KERNCONFS!=	cd ${.CURDIR}/sys/${target}/conf && \
 		! -name DEFAULTS ! -name LINT
 KERNCONFS:=	${KERNCONFS:S/^NOTES$/LINT/}
 universe: universe_${target}
-.ORDER: universe_prologue upgrade_checks universe_${target}_prologue universe_${target} universe_epilogue
+.ORDER: universe_prologue universe_${target} universe_epilogue
 universe_${target}:
 .if !defined(MAKE_JUST_KERNELS)
 	@echo ">> ${target} started on `LC_ALL=C date`"
@@ -297,7 +295,6 @@ universe_${target}:
 	    "check _.${target}.buildworld for details")
 	@echo ">> ${target} buildworld completed on `LC_ALL=C date`"
 .endif
-.if !defined(MAKE_JUST_WORLDS)
 .if exists(${.CURDIR}/sys/${target}/conf/NOTES)
 	@(cd ${.CURDIR}/sys/${target}/conf && env __MAKE_CONF=/dev/null \
 	    ${MAKE} LINT > ${.CURDIR}/_.${target}.makeLINT 2>&1 || \
@@ -313,7 +310,6 @@ universe_${target}:
 	    echo "${target} ${kernel} kernel failed," \
 	    "check _.${target}.${kernel} for details")
 .endfor
-.endif
 	@echo ">> ${target} completed on `LC_ALL=C date`"
 .endfor
 universe: universe_epilogue
@@ -88,7 +88,7 @@ CLEANDIR=	cleandir
 .endif

 CVS?=		cvs
-CVSFLAGS?=	-r RELENG_7 -P -d -I!
+CVSFLAGS?=	-r RELENG_7_3 -P -d -I!
 SUP?=		/usr/bin/csup
 SUPFLAGS?=	-g -L 2
 .if defined(SUPHOST)
@@ -263,7 +263,6 @@ LIB32WMAKEENV=	MAKEOBJDIRPREFIX=${OBJTREE}/lib32 \
 		VERSION="${VERSION}" \
 		MACHINE=i386 \
 		MACHINE_ARCH=i386 \
-		MACHINE_CPU="i686 mmx sse sse2" \
 		INSTALL="sh ${.CURDIR}/tools/install.sh" \
 		PATH=${TMPPATH} \
 		CC="${CC} ${LIB32FLAGS}" \
@@ -735,17 +734,15 @@ buildkernel:
 	@echo ">>> stage 2.3: build tools"
 	@echo "--------------------------------------------------------------"
 	cd ${KRNLOBJDIR}/${_kernel}; \
-	    PATH=${BPATH}:${PATH} \
 	    MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
-	    ${MAKE} -DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF \
+	    ${MAKE} -DNO_CPU_CFLAGS -DNO_CTF \
 	    -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
 # XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
 .for target in obj depend all
 	cd ${KERNSRCDIR}/modules/aic7xxx/aicasm; \
-	    PATH=${BPATH}:${PATH} \
 	    MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
-	    ${MAKE} -DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF ${target}
+	    ${MAKE} -DNO_CPU_CFLAGS -DNO_CTF ${target}
 .endfor
 .endif
 .if !defined(NO_KERNELDEPEND)
@@ -890,10 +887,6 @@ _colldef=	usr.bin/colldef
 _gencat=	usr.bin/gencat
 .endif

-.if ${BOOTSTRAPPING} >= 1000013
-_yacc=		usr.bin/yacc
-.endif
-
 .if ${BOOTSTRAPPING} < 600016
 _mklocale=	usr.bin/mklocale
 .endif
@@ -928,7 +921,6 @@ bootstrap-tools:
    ${_gencat} \
    usr.bin/lorder \
    usr.bin/makewhatis \
-    ${_yacc} \
    ${_mklocale} \
    usr.bin/rpcgen \
    usr.bin/xinstall \
@@ -993,7 +985,7 @@ build-tools:
 #
 # cross-tools: Build cross-building tools
 #
-.if ${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 702104
+.if ${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 702102
 .if ${TARGET_ARCH} == "amd64" || ${TARGET_ARCH} == "i386"
 _btxld=		usr.sbin/btxld
 .endif
@@ -14,16 +14,6 @@
 # The file is partitioned: OLD_FILES first, then OLD_LIBS and OLD_DIRS last.
 #

-# 20110224: sticky.8 -> sticky.7
-OLD_FILES+=usr/share/man/man8/sticky.8.gz
-# 20101114: Remove long-obsolete MAKEDEV.8
-OLD_FILES+=usr/share/man/man8/MAKEDEV.8.gz
-# 20101112: vgonel(9) has gone to private API a while ago
-OLD_FILES+=usr/share/man/man9/vgonel.9.gz
-# 20101025: catch up with vm_page_sleep_if_busy rename
-OLD_FILES+=usr/share/man/man9/vm_page_sleep_busy.9.gz
-# 20100815: retired last traces of chooseproc(9)
-OLD_FILES+=usr/share/man/man9/chooseproc.9.gz
 # 20091129: pecoff image activator removed
 .if ${TARGET_ARCH} == "i386"
 OLD_FILES+=usr/include/machine/pecoff_machdep.h
@@ -8,19 +8,6 @@ Items affecting the ports and packages system can be found in
 /usr/ports/UPDATING.  Please read that file before running
 portupgrade.

-20111101:
-	The broken amd(4) driver has been replaced with esp(4) in the amd64,
-	i386 and pc98 GENERIC kernel configuration files.
-
-20110221:
-	FreeBSD 7.4-RELEASE
-
-20101126:
-	New version of minidump format for amd64 architecture was
-	introduced in r215874.  To analyze vmcore files produced by
-	kernels at or after this version you will need updated userland,
-	libkvm actually, that is able to handle the new version.
-
 20100323:
 	FreeBSD 7.3-RELEASE

@@ -992,8 +979,8 @@ COMMON ITEMS:
 	<reboot in single user>				[3]
 	mergemaster -p					[5]
 	make installworld
+	make delete-old
 	mergemaster					[4]
-	make delete-old					[6]
 	<reboot>


@@ -1030,8 +1017,8 @@ COMMON ITEMS:
 	<reboot in single user>				[3]
 	mergemaster -p					[5]
 	make installworld
+	make delete-old
 	mergemaster -i					[4]
-	make delete-old					[6]
 	<reboot>

 	Make sure that you've read the UPDATING file to understand the
@@ -1073,10 +1060,6 @@ COMMON ITEMS:
 	install) after the buildworld before this step if you last updated
 	from current before 20020224 or from -stable before 20020408.

-	[6] This only deletes old files and directories. Old libraries
-	can be deleted by "make delete-old-libs", but you have to make
-	sure that no program is using those libraries anymore.
-
 	[8] In order to have a kernel that can run the 4.x binaries
 	needed to do an installworld, you must include the COMPAT_FREEBSD4
 	option in your kernel.  Failure to do so may leave you with a system
@@ -1099,10 +1082,9 @@ COMMON ITEMS:
 FORMAT:

 This file contains a list, in reverse chronological order, of major
-breakages in tracking -current.  It is not guaranteed to be a complete
-list of such breakages, and only contains entries since October 16, 2004.
-If you need to see UPDATING entries from before that date, you will need
-to fetch an UPDATING file from an older FreeBSD release.
+breakages in tracking -current.  Not all things will be listed here,
+and it only starts on October 16, 2004.  Updating files can found in
+previous releases if your system is older than this.

 Copyright information:

@@ -1072,7 +1072,6 @@ find_element(char *voltag, uint16_t *et, uint16_t *eu)

 	/* Read in the changer slots */
 	if (cp.cp_nslots > 0) {
-		(void) memset(&cesr, 0, sizeof(cesr));
 		cesr.cesr_element_type = CHET_ST;
 		cesr.cesr_element_base = 0;
 		cesr.cesr_element_count = cp.cp_nslots;
@@ -32,7 +32,7 @@
 .\"	@(#)chmod.1	8.4 (Berkeley) 3/31/94
 .\" $FreeBSD$
 .\"
-.Dd January 23, 2009
+.Dd December 22, 2006
 .Dt CHMOD 1
 .Os
 .Sh NAME
@@ -281,10 +281,6 @@ Operations upon the other permissions only (specified by the symbol
 ``o'' by itself), in combination with the
 .Ar perm
 symbols ``s'' or ``t'', are ignored.
-.Pp
-The ``w'' permission on directories will permit file creation, relocation,
-and copy into that directory.
-Files created within the directory itself will inherit its group ID.
 .Sh EXAMPLES
 .Bl -tag -width "u=rwx,go=u-w" -compact
 .It Li 644
@@ -347,5 +343,4 @@ command appeared in
 .Sh BUGS
 There is no
 .Ar perm
-option for the naughty bits which are ``S'' and
-``T'' respectively.
+option for the naughty bits.
@@ -32,7 +32,7 @@
 .\"	@(#)cp.1	8.3 (Berkeley) 4/18/94
 .\" $FreeBSD$
 .\"
-.Dd January 17, 2010
+.Dd October 27, 2006
 .Dt CP 1
 .Os
 .Sh NAME
@@ -45,7 +45,7 @@
 .Op Fl H | Fl L | Fl P
 .Oc
 .Op Fl f | i | n
-.Op Fl alpvx
+.Op Fl alpv
 .Ar source_file target_file
 .Nm
 .Oo
@@ -53,7 +53,7 @@
 .Op Fl H | Fl L | Fl P
 .Oc
 .Op Fl f | i | n
-.Op Fl alpvx
+.Op Fl alpv
 .Ar source_file ... target_directory
 .Sh DESCRIPTION
 In the first synopsis form, the
@@ -183,8 +183,6 @@ permissions.
 Cause
 .Nm
 to be verbose, showing files as they are copied.
-.It Fl x
-File system mount points are not traversed.
 .El
 .Pp
 For each destination file that already exists, its contents are
@@ -101,9 +101,8 @@ main(int argc, char *argv[])
 	int Hflag, Lflag, Pflag, ch, fts_options, r, have_trailing_slash;
 	char *target;

-	fts_options = FTS_NOCHDIR | FTS_PHYSICAL;
 	Hflag = Lflag = Pflag = 0;
-	while ((ch = getopt(argc, argv, "HLPRafilnprvx")) != -1)
+	while ((ch = getopt(argc, argv, "HLPRafilnprv")) != -1)
 		switch (ch) {
 		case 'H':
 			Hflag = 1;
@@ -151,9 +150,6 @@ main(int argc, char *argv[])
 		case 'v':
 			vflag = 1;
 			break;
-		case 'x':
-			fts_options |= FTS_XDEV;
-			break;
 		default:
 			usage();
 			break;
@@ -164,6 +160,7 @@ main(int argc, char *argv[])
 	if (argc < 2)
 		usage();

+	fts_options = FTS_NOCHDIR | FTS_PHYSICAL;
 	if (Rflag && rflag)
 		errx(1, "the -R and -r options may not be specified together");
 	if (rflag)
@@ -429,8 +429,8 @@ usage(void)
 {

 	(void)fprintf(stderr, "%s\n%s\n",
-"usage: cp [-R [-H | -L | -P]] [-f | -i | -n] [-alpvx] source_file target_file",
-"       cp [-R [-H | -L | -P]] [-f | -i | -n] [-alpvx] source_file ... "
+"usage: cp [-R [-H | -L | -P]] [-f | -i | -n] [-alpv] source_file target_file",
+"       cp [-R [-H | -L | -P]] [-f | -i | -n] [-alpv] source_file ... "
 "target_directory");
 	exit(EX_USAGE);
 }
@@ -18,7 +18,7 @@ DFLAGS= -D_PATH_TCSHELL='"/rescue/${PROG}"'
 DFLAGS= -D_PATH_TCSHELL='"/bin/${PROG}"'
 .endif
 CFLAGS+= -I. -I${.CURDIR} -I${TCSHDIR} ${DFLAGS}
-WARNS?=	1
+WARNS?=	0
 SRCS=	sh.c sh.dir.c sh.dol.c sh.err.c sh.exec.c sh.char.c \
 	sh.exp.c sh.file.c sh.func.c sh.glob.c sh.hist.c sh.init.c \
 	sh.lex.c sh.misc.c sh.parse.c sh.print.c sh.proc.c sh.sem.c \
@@ -107,10 +107,10 @@ gethost: gethost.c sh.err.h tc.const.h sh.h
 	@rm -f ${.TARGET}
 	${CC} -o gethost ${LDFLAGS} ${CFLAGS} ${TCSHDIR}/gethost.c

-tc.defs.c: gethost ${TCSHDIR}/host.defs
+tc.defs.c: gethost ${.CURDIR}/host.defs
 	@rm -f ${.TARGET}
 	@echo "/* Do not edit this file, make creates it */" > ${.TARGET}
-	./gethost ${TCSHDIR}/host.defs >> ${.TARGET}
+	./gethost ${.CURDIR}/host.defs >> ${.TARGET}

 ed.defns.h: ed.defns.c
 	@rm -f ${.TARGET}
@@ -1,5 +1,5 @@
 /* $FreeBSD$ */
-/* config.h.  Generated from config.h.in by configure.  */
+/* config.h.  Generated by configure.  */
 /* config.h.in.  Generated from configure.in by autoheader.  */

 /* Define to the type of elements in the array set by `getgroups'. Usually
@@ -12,6 +12,9 @@
 /* Define to 1 if you have the <auth.h> header file. */
 /* #undef HAVE_AUTH_H */

+/* Define to 1 if you have the `catgets' function. */
+#define HAVE_CATGETS 1
+
 /* Define to 1 if you have the <crypt.h> header file. */
 /* #undef HAVE_CRYPT_H */

@@ -38,9 +41,6 @@
 /* Define to 1 if you have the `dup2' function. */
 #define HAVE_DUP2 1

-/* Define to 1 if you have the <features.h> header file. */
-/* #undef HAVE_FEATURES_H */
-
 /* Define to 1 if you have the `getauthid' function. */
 /* #undef HAVE_GETAUTHID */

@@ -56,10 +56,7 @@
 /* Define to 1 if you have the `getutent' function. */
 /* #undef HAVE_GETUTENT */

-/* Define to 1 if you have the `getutxent' function. */
-/* #undef HAVE_GETUTXENT */
-
-/* Define if you have the iconv() function and it works. */
+/* Define if you have the iconv() function. */
 /* #undef HAVE_ICONV */

 /* Define to 1 if you have the <inttypes.h> header file. */
@@ -68,9 +65,6 @@
 /* Define to 1 if the system has the type `long long'. */
 #define HAVE_LONG_LONG 1

-/* Define to 1 if you have the `mallinfo' function. */
-/* #undef HAVE_MALLINFO */
-
 /* Define to 1 if mbrtowc and mbstate_t are properly declared. */
 #define HAVE_MBRTOWC 1

@@ -83,9 +77,6 @@
 /* Define to 1 if you have the `memset' function. */
 #define HAVE_MEMSET 1

-/* Define to 1 if you have the `mkstemp' function. */
-#define HAVE_MKSTEMP 1
-
 /* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
 /* #undef HAVE_NDIR_H */

@@ -95,9 +86,6 @@
 /* Define to 1 if you have the `nl_langinfo' function. */
 #define HAVE_NL_LANGINFO 1

-/* Define to 1 if you have the <paths.h> header file. */
-#define HAVE_PATHS_H 1
-
 /* Define to 1 if you have the `sbrk' function. */
 #define HAVE_SBRK 1

@@ -132,34 +120,22 @@
 /* Define to 1 if you have the `strstr' function. */
 #define HAVE_STRSTR 1

-/* Define to 1 if `d_ino' is a member of `struct dirent'. */
+/* Define to 1 if `d_ino' is member of `struct dirent'. */
 #define HAVE_STRUCT_DIRENT_D_INO 1

-/* Define to 1 if `ss_family' is a member of `struct sockaddr_storage'. */
+/* Define to 1 if `ss_family' is member of `struct sockaddr_storage'. */
 #define HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY 1

-/* Define to 1 if `ut_host' is a member of `struct utmpx'. */
-/* #undef HAVE_STRUCT_UTMPX_UT_HOST */
-
-/* Define to 1 if `ut_tv' is a member of `struct utmpx'. */
-/* #undef HAVE_STRUCT_UTMPX_UT_TV */
-
-/* Define to 1 if `ut_user' is a member of `struct utmpx'. */
-/* #undef HAVE_STRUCT_UTMPX_UT_USER */
-
-/* Define to 1 if `ut_xtime' is a member of `struct utmpx'. */
-/* #undef HAVE_STRUCT_UTMPX_UT_XTIME */
-
-/* Define to 1 if `ut_host' is a member of `struct utmp'. */
+/* Define to 1 if `ut_host' is member of `struct utmp'. */
 #define HAVE_STRUCT_UTMP_UT_HOST 1

-/* Define to 1 if `ut_tv' is a member of `struct utmp'. */
+/* Define to 1 if `ut_tv' is member of `struct utmp'. */
 /* #undef HAVE_STRUCT_UTMP_UT_TV */

-/* Define to 1 if `ut_user' is a member of `struct utmp'. */
+/* Define to 1 if `ut_user' is member of `struct utmp'. */
 /* #undef HAVE_STRUCT_UTMP_UT_USER */

-/* Define to 1 if `ut_xtime' is a member of `struct utmp'. */
+/* Define to 1 if `ut_xtime' is member of `struct utmp'. */
 /* #undef HAVE_STRUCT_UTMP_UT_XTIME */

 /* Define to 1 if you have the `sysconf' function. */
@@ -203,31 +179,25 @@
 /* Support NLS. */
 #define NLS 1

-/* Support NLS catalogs. */
-#define NLS_CATALOGS 1
-
 /* Define to the address where bug reports for this package should be sent. */
-#define PACKAGE_BUGREPORT "http://bugs.gw.com/"
+#define PACKAGE_BUGREPORT ""

 /* Define to the full name of this package. */
-#define PACKAGE_NAME "tcsh"
+#define PACKAGE_NAME ""

 /* Define to the full name and version of this package. */
-#define PACKAGE_STRING "tcsh 6.18.01"
+#define PACKAGE_STRING ""

 /* Define to the one symbol short name of this package. */
-#define PACKAGE_TARNAME "tcsh"
-
-/* Define to the home page for this package. */
-#define PACKAGE_URL ""
+#define PACKAGE_TARNAME ""

 /* Define to the version of this package. */
-#define PACKAGE_VERSION "6.18.01"
+#define PACKAGE_VERSION ""

 /* Define to 1 if the `setpgrp' function takes no argument. */
 /* #undef SETPGRP_VOID */

-/* The size of `wchar_t', as computed by sizeof. */
+/* The size of a `wchar_t', as computed by sizeof. */
 #define SIZEOF_WCHAR_T 4

 /* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
@@ -236,11 +206,6 @@
 /* Define to 1 if you have the ANSI C header files. */
 #define STDC_HEADERS 1

-/* Define for Solaris 2.5.1 so the uint32_t typedef from <sys/synch.h>,
-   <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
-   #define below would cause a syntax error. */
-/* #undef _UINT32_T */
-
 /* Define to empty if `const' does not conform to ANSI C. */
 /* #undef const */

@@ -250,7 +215,7 @@
 /* Define to `int' if <sys/types.h> does not define. */
 /* #undef mode_t */

-/* Define to `unsigned int' if <sys/types.h> does not define. */
+/* Define to `unsigned' if <sys/types.h> does not define. */
 /* #undef size_t */

 /* Define to `int' if neither <sys/types.h> nor <sys/socket.h> define. */
@@ -262,10 +227,6 @@
 /* Define to `int' if <sys/types.h> doesn't define. */
 /* #undef uid_t */

-/* Define to the type of an unsigned integer type of width exactly 32 bits if
-   such a type exists and the standard includes do not define it. */
-/* #undef uint32_t */
-
 /* Define to empty if the keyword `volatile' does not work. Warning: valid
   code using `volatile' can become incorrect without. Disable with care. */
 /* #undef volatile */
@@ -273,5 +234,9 @@
 #include "config_p.h"
 #include "config_f.h"

+#ifndef NO_NLS_CATALOGS
+#define NLS_CATALOGS
+#endif
+
 /* Work around a vendor issue where config_f.h is #undef'ing this setting */
 #define SYSMALLOC
@@ -105,6 +105,9 @@

 #elif defined(__APPLE__)
 # define SYSMALLOC
+
+#else
+# define NLS_CATALOGS
 #endif

 #endif /* _h_config */
@@ -124,7 +124,7 @@ main(int argc, char *argv[])
 				/* FALLTHROUGH */
 		case 'P':
 			/*
-			 * POSIX specifically discusses the behavior of
+			 * POSIX specifically discusses the the behavior of
 			 * both -k and -P. It states that the blocksize should
 			 * be set to 1024. Thus, if this occurs, simply break
 			 * rather than clobbering the old blocksize.
@@ -32,7 +32,7 @@
 .\"	@(#)echo.1	8.1 (Berkeley) 7/22/93
 .\" $FreeBSD$
 .\"
-.Dd November 12, 2010
+.Dd April 12, 2003
 .Dt ECHO 1
 .Os
 .Sh NAME
@@ -56,37 +56,24 @@ The following option is available:
 .Bl -tag -width flag
 .It Fl n
 Do not print the trailing newline character.
-.El
-.Pp
-The end-of-options marker
-.Fl Fl
-is not recognized and written literally.
-.Pp
-The newline may also be suppressed by appending
+This may also be achieved by appending
 .Ql \ec
 to the end of the string, as is done
 by iBCS2 compatible systems.
-Note that the
-.Fl n
-option as well as the effect of
+Note that this option as well as the effect of
 .Ql \ec
 are implementation-defined in
 .St -p1003.1-2001
 as amended by Cor.\& 1-2002.
-For portability,
-.Nm
-should only be used if the first argument does not start with a hyphen
-.Pq Ql "-"
-and does not contain any backslashes
-.Pq Ql "\e" .
-If this is not sufficient,
+Applications aiming for maximum
+portability are strongly encouraged to use
 .Xr printf 1
-should be used.
+to suppress the newline character.
+.El
 .Pp
-Most shells provide a builtin
+Some shells may provide a builtin
 .Nm
-command which tends to differ from this utility
-in the treatment of options and backslashes.
+command which is similar or identical to this utility.
 Consult the
 .Xr builtin 1
 manual page.
@@ -94,7 +94,6 @@ put_sbuf_line(const char *cs)
 		;
 	if (s - cs >= LINECHARS) {
 		errmsg = "line too long";
-		free(lp);
 		return NULL;
 	}
 	len = s - cs;
@@ -103,7 +102,6 @@ put_sbuf_line(const char *cs)
 		if (fseeko(sfp, (off_t)0, SEEK_END) < 0) {
 			fprintf(stderr, "%s\n", strerror(errno));
 			errmsg = "cannot seek temp file";
-			free(lp);
 			return NULL;
 		}
 		sfseek = ftello(sfp);
@@ -114,7 +112,6 @@ put_sbuf_line(const char *cs)
 		sfseek = -1;
 		fprintf(stderr, "%s\n", strerror(errno));
 		errmsg = "cannot write temp file";
-		free(lp);
 		return NULL;
 	}
 	lp->len = len;
@@ -231,7 +231,7 @@ The current line (address) in the buffer.
 The last line in the buffer.
 .It n
 The
-.Em n Ns th
+.Em n Ns th,
 line in the buffer
 where
 .Em n
@@ -649,7 +649,7 @@ The mark is not cleared until the line is
 deleted or otherwise modified.
 .It (.,.)l
 Print the addressed lines unambiguously.
-If a single line fills more than one screen (as might be the case
+If a single line fills for than one screen (as might be the case
 when viewing a binary file, for instance), a
 .Dq Li --More--
 prompt is printed on the last line.
@@ -30,7 +30,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd September 9, 2010
+.Dd July 12, 2004
 .Dt EXPR 1
 .Os
 .Sh NAME
@@ -217,9 +217,6 @@ command, one might rearrange the expression:
 More generally, parenthesize possibly-negative values:
 .Dl "a=$(expr \e( $a \e) + 1)"
 .It
-With shell arithmetic, no escaping is required:
-.Dl "a=$((a + 1))"
-.It
 This example prints the filename portion of a pathname stored
 in variable
 .Va a .
@@ -232,12 +229,6 @@ The
 .Li //
 characters resolve this ambiguity.
 .Dl "expr \*q//$a\*q \&: '.*/\e(.*\e)'"
-.It
-With modern
-.Xr sh 1
-syntax,
-.Dl "\*q${a##*/}\*q"
-expands to the same value.
 .El
 .Pp
 The following examples output the number of characters in variable
@@ -246,21 +237,19 @@ Again, if
 .Va a
 might begin with a hyphen, it is necessary to prevent it from being
 interpreted as an option to
-.Nm ,
-and
-.Va a
-might be interpreted as an operator.
+.Nm .
 .Bl -bullet
 .It
-To deal with all of this, a complicated command
+If the
+.Nm
+command conforms to
+.St -p1003.1-2001 ,
+this is simple:
+.Dl "expr -- \*q$a\*q \&: \*q.*\*q"
+.It
+For portability to older systems, however, a more complicated command
 is required:
 .Dl "expr \e( \*qX$a\*q \&: \*q.*\*q \e) - 1"
-.It
-With modern
-.Xr sh 1
-syntax, this can be done much more easily:
-.Dl "${#a}"
-expands to the required number.
 .El
 .Sh SEE ALSO
 .Xr sh 1 ,
@@ -108,7 +108,7 @@ main(int argc, char *argv[])
 			numsig = strtol(*argv, &ep, 10);
 			if (!**argv || *ep)
 				errx(1, "illegal signal number: %s", *argv);
-			if (numsig < 0)
+			if (numsig < 0 || numsig >= sys_nsig)
 				nosig(*argv);
 		} else
 			nosig(*argv);
@@ -29,7 +29,7 @@
 .\"	@(#)symlink.7	8.3 (Berkeley) 3/31/94
 .\" $FreeBSD$
 .\"
-.Dd April 25, 2010
+.Dd March 31, 1994
 .Dt SYMLINK 7
 .Os
 .Sh NAME
@@ -138,8 +138,8 @@ an existing symbolic link can be changed by means of the
 and
 .Xr lutimes 2
 system calls, respectively.
-Of these, only the flags and ownership are used by the system;
-the access permissions are ignored.
+Of these, only the flags are used by the system;
+the access permissions and ownership are ignored.
 .Pp
 The
 .Bx 4.4
@@ -504,7 +504,7 @@ traverse(int argc, char *argv[], int options)
 			break;
 		case FTS_DNR:
 		case FTS_ERR:
-			warnx("%s: %s", p->fts_path, strerror(p->fts_errno));
+			warnx("%s: %s", p->fts_name, strerror(p->fts_errno));
 			rval = 1;
 			break;
 		case FTS_D:
@@ -183,7 +183,7 @@ do_move(char *from, char *to)
 		} else if (iflg) {
 			(void)fprintf(stderr, "overwrite %s? %s", to, YESNO);
 			ask = 1;
-		} else if (access(to, W_OK) && !stat(to, &sb) && isatty(STDIN_FILENO)) {
+		} else if (access(to, W_OK) && !stat(to, &sb)) {
 			strmode(sb.st_mode, modep);
 			(void)fprintf(stderr, "override %s%s%s/%s for %s? %s",
 			    modep + 1, modep[9] == ' ' ? "" : " ",
@@ -29,6 +29,9 @@ PROG=   pax
 SRCS=	ar_io.c ar_subs.c buf_subs.c cache.c cpio.c file_subs.c ftree.c \
 	gen_subs.c getoldopt.c options.c pat_rep.c pax.c sel_subs.c \
 	tables.c tar.c tty_subs.c
+#XXX NOTYET
+#MAN=	pax.1 tar.1 cpio.1
+#LINKS=	${BINDIR}/pax ${BINDIR}/tar ${BINDIR}/pax ${BINDIR}/cpio

 .if ${MACHINE_ARCH} == "arm"
 WARNS?=	3
@@ -0,0 +1,304 @@
+.\"-
+.\" Copyright (c) 1997 SigmaSoft, Th. Lockert
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"      This product includes software developed by SigmaSoft, Th. Lockert.
+.\" 4. The name of the author may not be used to endorse or promote products
+.\"    derived from this software without specific prior written permission
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\"	$OpenBSD: cpio.1,v 1.16 2001/05/01 17:58:01 aaron Exp $
+.\" $FreeBSD$
+.\"
+.Dd February 16, 1997
+.Dt CPIO 1
+.Os
+.Sh NAME
+.Nm cpio
+.Nd copy file archives in and out
+.Sh SYNOPSIS
+.Nm
+.Fl o
+.Op Fl aABcLvzZ
+.Op Fl C Ar bytes
+.Op Fl F Ar archive
+.Op Fl H Ar format
+.Op Fl O Ar archive
+.No < Ar name-list
+.Op No > Ar archive
+.Nm
+.Fl i
+.Op Fl bBcdfmrsStuvzZ6
+.Op Fl C Ar bytes
+.Op Fl E Ar file
+.Op Fl F Ar archive
+.Op Fl H Ar format
+.Op Fl I Ar archive
+.Op Ar pattern ...
+.Op No < Ar archive
+.Nm
+.Fl p
+.Op Fl adlLmuv
+.Ar destination-directory
+.No < Ar name-list
+.Sh DESCRIPTION
+The
+.Nm
+command copies files to and from a
+.Nm
+archive.
+.Pp
+The options are as follows:
+.Bl -tag -width indent
+.It Fl o
+Create an archive.
+Reads the list of files to store in the
+archive from standard input, and writes the archive on standard
+output.
+.Bl -tag -width indent
+.It Fl a
+Reset the access times on files that have been copied to the
+archive.
+.It Fl A
+Append to the specified archive.
+.It Fl B
+Set block size of output to 5120 bytes.
+.It Fl c
+Use
+.Tn ASCII
+format for
+.Nm
+header for portability.
+.It Fl C Ar bytes
+Set the block size of output to
+.Ar bytes .
+.It Fl F Ar archive
+.It Fl O Ar archive
+Use the specified file name as the archive to write to.
+.It Fl H Ar format
+Write the archive in the specified format.
+Recognized formats are:
+.Pp
+.Bl -tag -width sv4cpio -compact
+.It Cm bcpio
+Old binary
+.Nm
+format.
+.It Cm cpio
+Old octal character
+.Nm
+format.
+.It Cm sv4cpio
+.Tn SVR4
+hex
+.Nm
+format.
+.It Cm tar
+Old tar format.
+.It Cm ustar
+.Tn POSIX
+ustar format.
+.El
+.It Fl L
+Follow symbolic links.
+.It Fl v
+Be verbose about operations.
+List filenames as they are written to the archive.
+.It Fl z
+Compress archive using
+.Xr gzip 1
+format.
+.It Fl Z
+Compress archive using
+.Xr compress 1
+format.
+.El
+.It Fl i
+Restore files from an archive.
+Reads the archive file from
+standard input and extracts files matching the
+.Ar patterns
+that were specified on the command line.
+.Bl -tag -width indent
+.It Fl b
+Do byte and word swapping after reading in data from the
+archive, for restoring archives created on systems with
+a different byte order.
+.It Fl B
+Set the block size of the archive being read to 5120 bytes.
+.It Fl c
+Expect the archive headers to be in
+.Tn ASCII
+format.
+.It Fl C Ar bytes
+Read archive written with a block size of
+.Ar bytes .
+.It Fl d
+Create any intermediate directories as needed during
+restore.
+.It Fl E Ar file
+Read list of file name patterns to extract or list from
+.Ar file .
+.It Fl f
+Restore all files except those matching the
+.Ar patterns
+given on the command line.
+.It Fl F Ar archive , Fl I Ar archive
+Use the specified file as the input for the archive.
+.It Fl H Ar format
+Read an archive of the specified format.
+Recognized formats are:
+.Pp
+.Bl -tag -width sv4cpio -compact
+.It Cm bcpio
+Old binary
+.Nm
+format.
+.It Cm cpio
+Old octal character
+.Nm
+format.
+.It Cm sv4cpio
+.Tn SVR4
+hex
+.Nm
+format.
+.It Cm tar
+Old tar format.
+.It Cm ustar
+.Tn POSIX
+ustar format.
+.El
+.It Fl m
+Restore modification times on files.
+.It Fl r
+Rename restored files interactively.
+.It Fl s
+Swap bytes after reading data from the archive.
+.It Fl S
+Swap words after reading data from the archive.
+.It Fl t
+Only list the contents of the archive, no files or
+directories will be created.
+.It Fl u
+Overwrite files even when the file in the archive is
+older than the one that will be overwritten.
+.It Fl v
+Be verbose about operations.
+List filenames as they are copied in from the archive.
+.It Fl z
+Uncompress archive using
+.Xr gzip 1
+format.
+.It Fl Z
+Uncompress archive using
+.Xr compress 1
+format.
+.It Fl 6
+Process old-style
+.Nm
+format archives.
+.El
+.It Fl p
+Copy files from one location to another in a single pass.
+The list of files to copy are read from standard input and
+written out to a directory relative to the specified
+.Ar directory
+argument.
+.Bl -tag -width indent
+.It Fl a
+Reset the access times on files that have been copied.
+.It Fl d
+Create any intermediate directories as needed to write
+the files at the new location.
+.It Fl l
+When possible, link files rather than creating an
+extra copy.
+.It Fl L
+Follow symbolic links.
+.It Fl m
+Restore modification times on files.
+.It Fl u
+Overwrite files even when the original file being copied is
+older than the one that will be overwritten.
+.It Fl v
+Be verbose about operations.
+List filenames as they are copied.
+.El
+.El
+.Sh ENVIRONMENT
+.Bl -tag -width TMPDIR
+.It Ev TMPDIR
+Path in which to store temporary files.
+.El
+.Sh EXIT STATUS
+The
+.Nm
+utility will exit with one of the following values:
+.Bl -tag -width 2n
+.It 0
+All files were processed successfully.
+.It 1
+An error occurred.
+.El
+.Pp
+Whenever
+.Nm
+cannot create a file or a link when extracting an archive or cannot
+find a file while writing an archive, or cannot preserve the user
+ID, group ID, file mode, or access and modification times when the
+.Fl p
+option is specified, a diagnostic message is written to standard
+error and a non-zero exit value will be returned, but processing
+will continue.
+In the case where
+.Nm
+cannot create a link to a file,
+.Nm
+will not create a second copy of the file.
+.Pp
+If the extraction of a file from an archive is prematurely terminated
+by a signal or error,
+.Nm
+may have only partially extracted the file the user wanted.
+Additionally, the file modes of extracted files and directories may
+have incorrect file bits, and the modification and access times may
+be wrong.
+.Pp
+If the creation of an archive is prematurely terminated by a signal
+or error,
+.Nm
+may have only partially created the archive which may violate the
+specific archive format specification.
+.Sh SEE ALSO
+.Xr pax 1 ,
+.Xr tar 1
+.Sh AUTHORS
+.An Keith Muller
+at the University of California, San Diego.
+.Sh BUGS
+The
+.Fl s
+and
+.Fl S
+options are currently not implemented.
@@ -33,7 +33,7 @@
 .\"	@(#)pax.1	8.4 (Berkeley) 4/18/94
 .\" $FreeBSD$
 .\"
-.Dd August 29, 2010
+.Dd July 3, 2004
 .Dt PAX 1
 .Os
 .Sh NAME
@@ -748,9 +748,7 @@ The extended tar interchange format specified in the
 .St -p1003.2
 standard.
 The default blocksize for this format is 10240 bytes.
-Pathnames stored by this format must be 255 characters or less in length.
-The directory part may be at most 155 characters and each path component
-must be less than 100 characters.
+Pathnames stored by this format must be 250 characters or less in length.
 .El
 .Pp
 The
@@ -0,0 +1,310 @@
+.\"-
+.\" Copyright (c) 1996 SigmaSoft, Th. Lockert
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"      This product includes software developed by SigmaSoft, Th. Lockert.
+.\" 4. The name of the author may not be used to endorse or promote products
+.\"    derived from this software without specific prior written permission
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\"	$OpenBSD: tar.1,v 1.33 2001/05/01 17:58:01 aaron Exp $
+.\" $FreeBSD$
+.\"
+.Dd February 7, 2001
+.Dt TAR 1
+.Os
+.Sh NAME
+.Nm tar
+.Nd tape archiver
+.Sh SYNOPSIS
+.Nm
+.Sm off
+.Op Fl
+.Brq Cm crtux
+.Op Cm befhjmopqsvwyzHLOPXZ014578
+.Sm on
+.Op Ar blocksize
+.Op Ar archive
+.Op Ar replstr
+.\" XXX how to do this right?
+.Op Fl C Ar directory
+.Op Fl I Ar file
+.Op Ar
+.Sh DESCRIPTION
+The
+.Nm
+command creates, adds files to, or extracts files from an
+archive file in
+.Nm
+format.
+A
+.Nm
+archive is often stored on a magnetic tape, but can be
+stored equally well on a floppy, CD-ROM, or in a regular disk file.
+.Pp
+One of the following flags must be present:
+.Bl -tag -width indent
+.It Fl c
+Create new archive, or overwrite an existing archive,
+adding the specified files to it.
+.It Fl r
+Append the named new files to existing archive.
+Note that this will only work on media on which an end-of-file mark
+can be overwritten.
+.It Fl t
+List contents of archive.
+If any files are named on the
+command line, only those files will be listed.
+.It Fl u
+Alias for
+.Fl r .
+.It Fl x
+Extract files from archive.
+If any files are named on the
+command line, only those files will be extracted from the
+archive.
+If more than one copy of a file exists in the
+archive, later copies will overwrite earlier copies during
+extraction.
+The file mode and modification time are preserved
+if possible.
+The file mode is subject to modification by the
+.Xr umask 2 .
+.El
+.Pp
+In addition to the flags mentioned above, any of the following
+flags may be used:
+.Bl -tag -width indent
+.It Fl b Ar "blocking factor"
+Set blocking factor to use for the archive, with 512 byte blocks.
+The default is 20, the maximum is 126.
+Archives with a blocking factor larger 63 violate the
+.Tn POSIX
+standard and will not be portable to all systems.
+.It Fl e
+Stop after first error.
+.It Fl f Ar archive
+Filename where the archive is stored.
+Defaults to
+.Pa /dev/sa0 .
+.It Fl h
+Follow symbolic links as if they were normal files
+or directories.
+.It Fl j
+Compress archives using
+.Xr bzip2 1 .
+.It Fl m
+Do not preserve modification time.
+.It Fl O
+Write old-style
+.Pq non- Ns Tn POSIX
+archives.
+.It Fl o
+Do not write directory information that the older (V7) style
+.Nm
+is unable to decode.
+This implies the
+.Fl O
+flag.
+.It Fl p
+Preserve user and group ID as well as file mode regardless of
+the current
+.Xr umask 2 .
+The setuid and setgid bits are only preserved if the user is
+the superuser.
+Only meaningful in conjunction with the
+.Fl x
+flag.
+.It Fl q
+Select the first archive member that matches each
+.Ar pattern
+operand.
+No more than one archive member is matched for each
+.Ar pattern .
+When members of type directory are matched, the file hierarchy rooted at that
+directory is also matched.
+.It Fl s Ar replstr
+Modify the file or archive member names specified by the
+.Ar pattern
+or
+.Ar file
+operands according to the substitution expression
+.Ar replstr ,
+using the syntax of the
+.Xr ed 1
+utility regular expressions.
+The format of these regular expressions are:
+.Dl /old/new/[gp]
+As in
+.Xr ed 1 ,
+.Cm old
+is a basic regular expression and
+.Cm new
+can contain an ampersand
+.Pq Ql & ,
+.Li \e Ns Ar n
+(where
+.Ar n
+is a digit) back-references,
+or subexpression matching.
+The
+.Cm old
+string may also contain newline characters.
+Any non-null character can be used as a delimiter
+.Ql ( /
+is shown here).
+Multiple
+.Fl s
+expressions can be specified.
+The expressions are applied in the order they are specified on the
+command line, terminating with the first successful substitution.
+The optional trailing
+.Cm g
+continues to apply the substitution expression to the pathname substring
+which starts with the first character following the end of the last successful
+substitution.
+The first unsuccessful substitution stops the operation of the
+.Cm g
+option.
+The optional trailing
+.Cm p
+will cause the final result of a successful substitution to be written to
+standard error
+in the following format:
+.Pp
+.Dl <original pathname> >> <new pathname>
+.Pp
+File or archive member names that substitute to the empty string
+are not selected and will be skipped.
+.It Fl v
+Verbose operation mode.
+.It Fl w
+Interactively rename files.
+This option causes
+.Nm
+to prompt the user for the filename to use when storing or
+extracting files in an archive.
+.It Fl y
+Compress archives using
+.Xr bzip2 1 .
+.It Fl z
+Compress archive using
+.Xr gzip 1 .
+.It Fl C Ar directory
+This is a positional argument which sets the working directory for the
+following files.
+When extracting, files will be extracted into
+the specified directory; when creating, the specified files will be matched
+from the directory.
+.It Fl H
+Follow symlinks given on command line only.
+.It Fl L
+Follow all symlinks.
+.It Fl P
+Do not strip leading slashes
+.Pq Ql /
+from pathnames.
+The default is to strip leading slashes.
+.It Fl I Ar file
+This is a positional argument which reads the names of files to
+archive or extract from the given file, one per line.
+.It Fl X
+Do not cross mount points in the file system.
+.It Fl Z
+Compress archive using
+.Xr compress 1 .
+.El
+.Pp
+The options
+.Op Fl 014578
+can be used to select one of the compiled-in backup devices,
+.Pa /dev/rst Ns Ar N .
+.Sh ENVIRONMENT
+.Bl -tag -width TMPDIR
+.It Ev TMPDIR
+Path in which to store temporary files.
+.It Ev TAPE
+Default tape device to use instead of
+.Pa /dev/sa0 .
+.El
+.Sh FILES
+.Bl -tag -width "/dev/sa0"
+.It Pa /dev/sa0
+default archive name
+.El
+.Sh EXIT STATUS
+The
+.Nm
+utility will exit with one of the following values:
+.Bl -tag -width 2n
+.It 0
+All files were processed successfully.
+.It 1
+An error occurred.
+.El
+.Pp
+Whenever
+.Nm
+cannot create a file or a link when extracting an archive or cannot
+find a file while writing an archive, or cannot preserve the user
+ID, group ID, file mode, or access and modification times when the
+.Fl p
+option is specified, a diagnostic message is written to standard
+error and a non-zero exit value will be returned, but processing
+will continue.
+In the case where
+.Nm
+cannot create a link to a file,
+.Nm
+will not create a second copy of the file.
+.Pp
+If the extraction of a file from an archive is prematurely terminated
+by a signal or error,
+.Nm
+may have only partially extracted the file the user wanted.
+Additionally, the file modes of extracted files and directories may
+have incorrect file bits, and the modification and access times may
+be wrong.
+.Pp
+If the creation of an archive is prematurely terminated by a signal
+or error,
+.Nm
+may have only partially created the archive which may violate the
+specific archive format specification.
+.Sh COMPATIBILITY
+The
+.Fl L
+flag is not portable to other versions of
+.Nm
+where it may have a different meaning.
+.Sh SEE ALSO
+.Xr cpio 1 ,
+.Xr pax 1
+.Sh HISTORY
+A
+.Nm
+command first appeared in
+.At v7 .
+.Sh AUTHORS
+.An Keith Muller
+at the University of California, San Diego.
@@ -1086,7 +1086,7 @@ name_split(char *name, int len)
 	 */
 	if (len <= TNMSZ)
 		return(name);
-	if (len > TPFSZ + TNMSZ)
+	if (len > (TPFSZ + TNMSZ + 1))
 		return(NULL);

 	/*
@@ -1095,7 +1095,7 @@ name_split(char *name, int len)
 	 * to find the biggest piece to fit in the name field (or the smallest
 	 * prefix we can find)
 	 */
-	start = name + len - TNMSZ;
+	start = name + len - TNMSZ - 1;
 	while ((*start != '\0') && (*start != '/'))
 		++start;

@@ -29,7 +29,7 @@
 .\"     @(#)ps.1	8.3 (Berkeley) 4/18/94
 .\" $FreeBSD$
 .\"
-.Dd October 1, 2011
+.Dd May 16, 2009
 .Dt PS 1
 .Os
 .Sh NAME
@@ -54,11 +54,6 @@ utility
 displays a header line, followed by lines containing information about
 all of your
 processes that have controlling terminals.
-If the
-.Fl x
-options is specified,
-.Nm
-will also display processes that do not have controlling terminals.
 .Pp
 A different set of processes can be selected for display by using any
 combination of the
@@ -95,8 +90,8 @@ and
 .Fl o
 options).
 The default output format includes, for each process, the process' ID,
-controlling terminal, state, CPU time (including both user and system time)
-and associated command.
+controlling terminal, CPU time (including both user and system time),
+state, and associated command.
 .Pp
 The process file system (see
 .Xr procfs 5 )
@@ -108,9 +103,13 @@ The options are as follows:
 .Bl -tag -width indent
 .It Fl a
 Display information about other users' processes as well as your own.
-If the
+This will skip any processes which do not have a controlling terminal,
+unless the
+.Fl x
+option is also specified.
+This can be disabled by setting the
 .Va security.bsd.see_other_uids
-sysctl is set to zero, this option is honored only if the UID of the user is 0.
+sysctl to zero.
 .It Fl c
 Change the
 .Dq command
@@ -214,9 +213,6 @@ with the standard input.
 .It Fl t
 Display information about processes attached to the specified terminal
 devices.
-Full pathnames, as well as abbreviations (see explanation of the
-.Cm tt
-keyword) can be specified.
 .It Fl U
 Display the processes belonging to the specified usernames.
 .It Fl u
@@ -415,15 +411,12 @@ The process is being traced or debugged.
 An abbreviation for the pathname of the controlling terminal, if any.
 The abbreviation consists of the three letters following
 .Pa /dev/tty ,
-or, for pseudo-terminals, the corresponding entry in
-.Pa /dev/pts .
+or, for the console,
+.Dq Li con .
 This is followed by a
 .Ql -
 if the process can no longer reach that
 controlling terminal (i.e., it has been revoked).
-The full pathname of the controlling terminal is available via the
-.Cm tty
-keyword.
 .It Cm wchan
 The event (an address in the system) on which a process waits.
 When printed numerically, the initial part of the address is
@@ -212,8 +212,7 @@ main(int argc, char *argv[])
 	init_list(&sesslist, addelem_pid, sizeof(pid_t), "session id");
 	init_list(&ttylist, addelem_tty, sizeof(dev_t), "tty");
 	init_list(&uidlist, addelem_uid, sizeof(uid_t), "user");
-	memf = _PATH_DEVNULL;
-	nlistf = NULL;
+	memf = nlistf = _PATH_DEVNULL;
 	while ((ch = getopt(argc, argv, PS_ARGS)) != -1)
 		switch ((char)ch) {
 		case 'A':
@@ -288,16 +288,10 @@ rm_tree(char **argv)
 				if (fflag)
 					continue;
 				/* FALLTHROUGH */
-
-			case FTS_F:
-			case FTS_NSOK:
-				if (Pflag)
-					if (!rm_overwrite(p->fts_accpath, p->fts_info ==
-					    FTS_NSOK ? NULL : p->fts_statp))
-						continue;
-				/* FALLTHROUGH */
-
 			default:
+				if (Pflag)
+					if (!rm_overwrite(p->fts_accpath, NULL))
+						continue;
 				rval = unlink(p->fts_accpath);
 				if (rval == 0 || (fflag && errno == ENOENT)) {
 					if (rval == 0 && vflag)
@@ -392,7 +386,7 @@ rm_file(char **argv)
 int
 rm_overwrite(char *file, struct stat *sbp)
 {
-	struct stat sb, sb2;
+	struct stat sb;
 	struct statfs fsb;
 	off_t len;
 	int bsize, fd, wlen;
@@ -411,15 +405,8 @@ rm_overwrite(char *file, struct stat *sbp)
 		    file, sbp->st_ino);
 		return (0);
 	}
-	if ((fd = open(file, O_WRONLY|O_NONBLOCK|O_NOFOLLOW, 0)) == -1)
+	if ((fd = open(file, O_WRONLY, 0)) == -1)
 		goto err;
-	if (fstat(fd, &sb2))
-		goto err;
-	if (sb2.st_dev != sbp->st_dev || sb2.st_ino != sbp->st_ino ||
-	    !S_ISREG(sb2.st_mode)) {
-		errno = EPERM;
-		goto err;
-	}
 	if (fstatfs(fd, &fsb) == -1)
 		goto err;
 	bsize = MAX(fsb.f_iosize, 1024);
@@ -21,12 +21,12 @@ LDADD= -ll -ledit -ltermcap
 LFLAGS= -8	# 8-bit lex scanner for arithmetic
 CFLAGS+=-DSHELL -I. -I${.CURDIR}
 # for debug:
-# DEBUG_FLAGS+= -g -DDEBUG=2 -fno-inline
+# CFLAGS+= -g -DDEBUG=2
 WARNS?=	2
 WFORMAT=0

 .PATH:	${.CURDIR}/bltin \
-	${.CURDIR}/../test
+	${.CURDIR}/../../bin/test

 CLEANFILES+= mkinit mkinit.o mknodes mknodes.o \
 	mksyntax mksyntax.o
@@ -62,7 +62,4 @@ syntax.c syntax.h: mksyntax
 token.h: mktokens
 	sh ${.CURDIR}/mktokens

-regress:
-	cd ${.CURDIR}/../../tools/regression/bin/sh && ${MAKE} SH=${.OBJDIR}/sh
-
 .include <bsd.prog.mk>
@@ -0,0 +1,114 @@
+.\"-
+.\" Copyright (c) 1991, 1993
+.\"	The Regents of the University of California.  All rights reserved.
+.\"
+.\" This code is derived from software contributed to Berkeley by
+.\" Kenneth Almquist.
+.\" Copyright 1989 by Kenneth Almquist
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 4. Neither the name of the University nor the names of its contributors
+.\"    may be used to endorse or promote products derived from this software
+.\"    without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.\"	@(#)echo.1	8.2 (Berkeley) 5/4/95
+.\" $FreeBSD$
+.\"
+.Dd May 4, 1995
+.Dt ECHO 1
+.Os
+.Sh NAME
+.Nm echo
+.Nd produce message in a shell script
+.Sh SYNOPSIS
+.Nm
+.Op Fl n | Fl e
+.Ar args...
+.Sh DESCRIPTION
+The
+.Nm
+utility prints its arguments on the standard output, separated by spaces.
+Unless the
+.Fl n
+option is present, a newline is output following the arguments.
+The
+.Fl e
+option causes
+.Nm
+to treat the escape sequences specially, as described in the following
+paragraph.
+The
+.Fl e
+option is the default, and is provided solely for compatibility with
+other systems.
+Only one of the options
+.Fl n
+and
+.Fl e
+may be given.
+.Pp
+If any of the following sequences of characters is encountered during
+output, the sequence is not output.
+Instead, the specified action is
+performed:
+.Bl -tag -width indent
+.It Li \eb
+A backspace character is output.
+.It Li \ec
+Subsequent output is suppressed.
+This is normally used at the end of the
+last argument to suppress the trailing newline that
+.Nm
+would otherwise output.
+.It Li \ef
+Output a form feed.
+.It Li \en
+Output a newline character.
+.It Li \er
+Output a carriage return.
+.It Li \et
+Output a (horizontal) tab character.
+.It Li \ev
+Output a vertical tab.
+.It Li \e0 Ns Ar digits
+Output the character whose value is given by zero to three digits.
+If there are zero digits, a
+.Dv NUL
+character is output.
+.It Li \e\e
+Output a backslash.
+.El
+.Sh HINTS
+Remember that backslash is special to the shell and needs to be escaped.
+To output a message to standard error, say
+.Pp
+.D1 echo message >&2
+.Sh BUGS
+The octal character escape mechanism
+.Pq Li \e0 Ns Ar digits
+differs from the
+C language mechanism.
+.Pp
+There is no way to force
+.Nm
+to treat its arguments literally, rather than interpreting them as
+options and escape sequences.
@@ -70,7 +70,7 @@ STATIC int docd(char *, int, int);
 STATIC char *getcomponent(void);
 STATIC char *findcwd(char *);
 STATIC void updatepwd(char *);
-STATIC char *getpwd2(void);
+STATIC char *getpwd2(char *, size_t);

 STATIC char *curdir = NULL;	/* current working directory */
 STATIC char *prevdir;		/* previous working directory */
@@ -263,8 +263,10 @@ findcwd(char *dir)
 	 * any more because we traversed a symbolic link or something
 	 * we couldn't stat().
 	 */
-	if (dir == NULL || curdir == NULL)
-		return getpwd2();
+	if (dir == NULL || curdir == NULL)  {
+		p = stalloc(PATH_MAX);
+		return getpwd2(p, PATH_MAX);
+	}
 	cdcomppath = stalloc(strlen(dir) + 1);
 	scopy(dir, cdcomppath);
 	STARTSTACKSTR(new);
@@ -311,7 +313,7 @@ updatepwd(char *dir)
 int
 pwdcmd(int argc, char **argv)
 {
-	char *p;
+	char buf[PATH_MAX];
 	int ch, phys;

 	optreset = 1; optind = 1; opterr = 0; /* initialize getopt */
@@ -339,9 +341,9 @@ pwdcmd(int argc, char **argv)
 		out1str(curdir);
 		out1c('\n');
 	} else {
-		if ((p = getpwd2()) == NULL)
+		if (getcwd(buf, sizeof(buf)) == NULL)
 			error(".: %s", strerror(errno));
-		out1str(p);
+		out1str(buf);
 		out1c('\n');
 	}

@@ -354,45 +356,36 @@ pwdcmd(int argc, char **argv)
 char *
 getpwd(void)
 {
+	char buf[PATH_MAX];
 	char *p;

 	if (curdir)
 		return curdir;

-	p = getpwd2();
+	p = getpwd2(buf, sizeof(buf));
 	if (p != NULL)
 		curdir = savestr(p);

 	return curdir;
 }

-#define MAXPWD 256
-
 /*
 * Return the current directory.
 */
 STATIC char *
-getpwd2(void)
+getpwd2(char *buf, size_t size)
 {
-	struct stat stdot, stpwd;
-	char *pwd;
-	int i;
+	if (getcwd(buf, size) == NULL) {
+		char *pwd = getenv("PWD");
+		struct stat stdot, stpwd;

-	for (i = MAXPWD;; i *= 2) {
-		pwd = stalloc(i);
-		if (getcwd(pwd, i) != NULL)
+		if (pwd && *pwd == '/' && stat(".", &stdot) != -1 &&
+		    stat(pwd, &stpwd) != -1 &&
+		    stdot.st_dev == stpwd.st_dev &&
+		    stdot.st_ino == stpwd.st_ino) {
 			return pwd;
-		stunalloc(pwd);
-		if (errno != ERANGE)
-			break;
+		}
+		return NULL;
 	}
-
-	pwd = getenv("PWD");
-	if (pwd && *pwd == '/' && stat(".", &stdot) != -1 &&
-	    stat(pwd, &stpwd) != -1 &&
-	    stdot.st_dev == stpwd.st_dev &&
-	    stdot.st_ino == stpwd.st_ino) {
-		return pwd;
-	}
-	return NULL;
+	return buf;
 }
@@ -83,7 +83,6 @@ MKINIT int evalskip;		/* set if we are skipping commands */
 STATIC int skipcount;		/* number of levels to skip */
 MKINIT int loopnest;		/* current loop nesting level */
 int funcnest;			/* depth of function calls */
-STATIC int builtin_flags;	/* evalcommand flags for builtins */


 char *commandname;
@@ -148,7 +147,7 @@ evalcmd(int argc, char **argv)
                        STPUTC('\0', concat);
                        p = grabstackstr(concat);
                }
-                evalstring(p, builtin_flags & EV_TESTED);
+                evalstring(p);
        }
        return exitstatus;
 }
@@ -159,7 +158,7 @@ evalcmd(int argc, char **argv)
 */

 void
-evalstring(char *s, int flags)
+evalstring(char *s)
 {
 	union node *n;
 	struct stackmark smark;
@@ -167,8 +166,7 @@ evalstring(char *s, int flags)
 	setstackmark(&smark);
 	setinputstring(s, 1);
 	while ((n = parsecmd(0)) != NEOF) {
-		if (n != NULL)
-			evaltree(n, flags);
+		evaltree(n, 0);
 		popstackmark(&smark);
 	}
 	popfile();
@@ -842,7 +840,6 @@ evalcommand(union node *cmd, int flags, struct backcmd *backcmd)
 		commandname = argv[0];
 		argptr = argv + 1;
 		optptr = NULL;			/* initialize nextopt */
-		builtin_flags = flags;
 		exitstatus = (*builtinfunc[cmdentry.u.index])(argc, argv);
 		flushall();
 cmddone:
@@ -46,7 +46,7 @@ struct backcmd {		/* result of evalbackcmd */
 };

 int evalcmd(int, char **);
-void evalstring(char *, int);
+void evalstring(char *);
 union node;	/* BLETCH for ansi C */
 void evaltree(union node *, int);
 void evalbackcmd(union node *, struct backcmd *);
@@ -1,8 +1,6 @@
 /*-
 * Copyright (c) 1991, 1993
 *	The Regents of the University of California.  All rights reserved.
- * Copyright (c) 1997-2005
- *	Herbert Xu <herbert@gondor.apana.org.au>.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * Kenneth Almquist.
@@ -139,18 +137,12 @@ expandhere(union node *arg, int fd)


 /*
- * Perform expansions on an argument, placing the resulting list of arguments
- * in arglist.  Parameter expansion, command substitution and arithmetic
- * expansion are always performed; additional expansions can be requested
- * via flag (EXP_*).
- * The result is left in the stack string.
- * When arglist is NULL, perform here document expansion.  A partial result
- * may be written to herefd, which is then not included in the stack string.
- *
- * Caution: this function uses global state and is not reentrant.
- * However, a new invocation after an interrupted invocation is safe
- * and will reset the global state for the new call.
+ * Perform variable substitution and command substitution on an argument,
+ * placing the resulting list of arguments in arglist.  If EXP_FULL is true,
+ * perform splitting and file name expansion.  When arglist is NULL, perform
+ * here document expansion.
 */
+
 void
 expandarg(union node *arg, struct arglist *arglist, int flag)
 {
@@ -202,14 +194,11 @@ expandarg(union node *arg, struct arglist *arglist, int flag)


 /*
- * Perform parameter expansion, command substitution and arithmetic
- * expansion, and tilde expansion if requested via EXP_TILDE/EXP_VARTILDE.
- * Processing ends at a CTLENDVAR character as well as '\0'.
- * This is used to expand word in ${var+word} etc.
- * If EXP_FULL, EXP_CASE or EXP_REDIR are set, keep and/or generate CTLESC
- * characters to allow for further processing.
- * If EXP_FULL is set, also preserve CTLQUOTEMARK characters.
+ * Perform variable and command substitution.  If EXP_FULL is set, output CTLESC
+ * characters to allow for further processing.  Otherwise treat
+ * $@ like $* since no splitting will be performed.
 */
+
 STATIC void
 argstr(char *p, int flag)
 {
@@ -222,7 +211,7 @@ argstr(char *p, int flag)
 	for (;;) {
 		switch (c = *p++) {
 		case '\0':
-		case CTLENDVAR:
+		case CTLENDVAR: /* ??? */
 			goto breakloop;
 		case CTLQUOTEMARK:
 			/* "$@" syntax adherence hack */
@@ -272,10 +261,6 @@ argstr(char *p, int flag)
 breakloop:;
 }

-/*
- * Perform tilde expansion, placing the result in the stack string and
- * returning the next position in the input string to process.
- */
 STATIC char *
 exptilde(char *p, int flag)
 {
@@ -376,11 +361,12 @@ expari(int flag)
 	int quotes = flag & (EXP_FULL | EXP_CASE | EXP_REDIR);
 	int quoted;

+
 	/*
 	 * This routine is slightly over-complicated for
 	 * efficiency.  First we make sure there is
 	 * enough space for the result, which may be bigger
-	 * than the expression.  Next we
+	 * than the expression if we add exponentiation.  Next we
 	 * scan backwards looking for the start of arithmetic.  If the
 	 * next previous character is a CTLESC character, then we
 	 * have to rescan starting from the beginning since CTLESC
@@ -419,8 +405,9 @@ expari(int flag)


 /*
- * Perform command substitution.
+ * Expand stuff in backwards quotes.
 */
+
 STATIC void
 expbackq(union node *cmd, int quoted, int flag)
 {
@@ -944,7 +931,7 @@ numvar:


 /*
- * Record the fact that we have to scan this region of the
+ * Record the the fact that we have to scan this region of the
 * string for IFS characters.
 */

@@ -972,12 +959,6 @@ recordregion(int start, int end, int nulonly)
 * Break the argument string into pieces based upon IFS and add the
 * strings to the argument list.  The regions of the string to be
 * searched for IFS characters have been stored by recordregion.
- * CTLESC characters are preserved but have little effect in this pass
- * other than escaping CTL* characters.  In particular, they do not escape
- * IFS characters: that should be done with the ifsregion mechanism.
- * CTLQUOTEMARK characters are used to preserve empty quoted strings.
- * This pass treats them as a regular character, making the string non-empty.
- * Later, they are removed along with the other CTL* characters.
 */
 STATIC void
 ifsbreakup(char *string, struct arglist *arglist)
@@ -1065,14 +1046,15 @@ ifsbreakup(char *string, struct arglist *arglist)
 }


-STATIC char expdir[PATH_MAX];
-#define expdir_end (expdir + sizeof(expdir))

 /*
- * Perform pathname generation and remove control characters.
- * At this point, the only control characters should be CTLESC and CTLQUOTEMARK.
- * The results are stored in the list exparg.
+ * Expand shell metacharacters.  At this point, the only control characters
+ * should be escapes.  The results are stored in the list exparg.
 */
+
+STATIC char *expdir;
+
+
 STATIC void
 expandmeta(struct strlist *str, int flag __unused)
 {
@@ -1094,7 +1076,14 @@ expandmeta(struct strlist *str, int flag __unused)
 		}
 		savelastp = exparg.lastp;
 		INTOFF;
+		if (expdir == NULL) {
+			int i = strlen(str->text);
+			expdir = ckmalloc(i < 2048 ? 2048 : i); /* XXX */
+		}
+
 		expmeta(expdir, str->text);
+		ckfree(expdir);
+		expdir = NULL;
 		INTON;
 		if (exparg.lastp == savelastp) {
 			/*
@@ -1133,11 +1122,10 @@ expmeta(char *enddir, char *name)
 	struct dirent *dp;
 	int atend;
 	int matchdot;
-	int esc;

 	metaflag = 0;
 	start = name;
-	for (p = name; esc = 0, *p; p += esc + 1) {
+	for (p = name ; ; p++) {
 		if (*p == '*' || *p == '?')
 			metaflag = 1;
 		else if (*p == '[') {
@@ -1162,14 +1150,12 @@ expmeta(char *enddir, char *name)
 			break;
 		else if (*p == CTLQUOTEMARK)
 			continue;
-		else {
-			if (*p == CTLESC)
-				esc++;
-			if (p[esc] == '/') {
-				if (metaflag)
-					break;
-				start = p + esc + 1;
-			}
+		else if (*p == CTLESC)
+			p++;
+		if (*p == '/') {
+			if (metaflag)
+				break;
+			start = p + 1;
 		}
 	}
 	if (metaflag == 0) {	/* we've reached the end of the file name */
@@ -1183,8 +1169,6 @@ expmeta(char *enddir, char *name)
 			*enddir++ = *p;
 			if (*p == '\0')
 				break;
-			if (enddir == expdir_end)
-				return;
 		}
 		if (metaflag == 0 || lstat(expdir, &statb) >= 0)
 			addfname(expdir);
@@ -1199,8 +1183,6 @@ expmeta(char *enddir, char *name)
 			if (*p == CTLESC)
 				p++;
 			*enddir++ = *p++;
-			if (enddir == expdir_end)
-				return;
 		}
 	}
 	if (enddir == expdir) {
@@ -1219,8 +1201,7 @@ expmeta(char *enddir, char *name)
 		atend = 1;
 	} else {
 		atend = 0;
-		*endname = '\0';
-		endname += esc + 1;
+		*endname++ = '\0';
 	}
 	matchdot = 0;
 	p = start;
@@ -1234,23 +1215,21 @@ expmeta(char *enddir, char *name)
 		if (dp->d_name[0] == '.' && ! matchdot)
 			continue;
 		if (patmatch(start, dp->d_name, 0)) {
-			if (enddir + dp->d_namlen + 1 > expdir_end)
-				continue;
-			memcpy(enddir, dp->d_name, dp->d_namlen + 1);
-			if (atend)
+			if (atend) {
+				scopy(dp->d_name, enddir);
 				addfname(expdir);
-			else {
-				if (enddir + dp->d_namlen + 2 > expdir_end)
+			} else {
+				for (p = enddir, q = dp->d_name;
+				     (*p++ = *q++) != '\0';)
 					continue;
-				enddir[dp->d_namlen] = '/';
-				enddir[dp->d_namlen + 1] = '\0';
-				expmeta(enddir + dp->d_namlen + 1, endname);
+				p[-1] = '/';
+				expmeta(p, endname);
 			}
 		}
 	}
 	closedir(dirp);
 	if (! atend)
-		endname[-esc - 1] = esc ? CTLESC : '/';
+		endname[-1] = '/';
 }


@@ -1472,7 +1451,7 @@ breakloop:


 /*
- * Remove any CTLESC and CTLQUOTEMARK characters from a string.
+ * Remove any CTLESC characters from a string.
 */

 void
@@ -350,7 +350,7 @@ histcmd(int argc, char **argv)
 				if (displayhist) {
 					out2str(s);
 				}
-				evalstring(s, 0);
+				evalstring(s);
 				if (displayhist && hist) {
 					/*
 					 *  XXX what about recursive and
@@ -382,7 +382,7 @@ histcmd(int argc, char **argv)
 		fclose(efp);
 		editcmd = stalloc(strlen(editor) + strlen(editfile) + 2);
 		sprintf(editcmd, "%s %s", editor, editfile);
-		evalstring(editcmd, 0);	/* XXX - should use no JC command */
+		evalstring(editcmd);	/* XXX - should use no JC command */
 		INTON;
 		readcmdfile(editfile);	/* XXX - should read back - quick tst */
 		unlink(editfile);
@@ -411,7 +411,7 @@ fc_replace(const char *s, char *p, char *r)
 		} else
 			STPUTC(*s++, dest);
 	}
-	STPUTC('\0', dest);
+	STACKSTRNUL(dest);
 	dest = grabstackstr(dest);

 	return (dest);
@@ -178,7 +178,7 @@ state2:
 state3:
 	state = 4;
 	if (minusc) {
-		evalstring(minusc, 0);
+		evalstring(minusc);
 	}
 	if (sflag || minusc == NULL) {
 state4:	/* XXX ??? - why isn't this before the "if" statement */
@@ -295,13 +295,6 @@ grabstackblock(int len)
 * is space for at least one character.
 */

-static char *
-growstrstackblock(int n)
-{
-	growstackblock();
-	sstrnleft = stackblocksize() - n;
-	return stackblock() + n;
-}

 char *
 growstackstr(void)
@@ -311,10 +304,12 @@ growstackstr(void)
 	len = stackblocksize();
 	if (herefd >= 0 && len >= 1024) {
 		xwrite(herefd, stackblock(), len);
-		sstrnleft = len;
+		sstrnleft = len - 1;
 		return stackblock();
 	}
-	return growstrstackblock(len);
+	growstackblock();
+	sstrnleft = stackblocksize() - len - 1;
+	return stackblock() + len;
 }


@@ -328,7 +323,9 @@ makestrspace(void)
 	int len;

 	len = stackblocksize() - sstrnleft;
-	return growstrstackblock(len);
+	growstackblock();
+	sstrnleft = stackblocksize() - len;
+	return stackblock() + len;
 }


@@ -65,16 +65,9 @@ void ungrabstackstr(char *, char *);
 #define stackblock() stacknxt
 #define stackblocksize() stacknleft
 #define STARTSTACKSTR(p)	p = stackblock(), sstrnleft = stackblocksize()
-#define STPUTC(c, p)	(--sstrnleft >= 0? (*p++ = (c)) : (p = growstackstr(), --sstrnleft, *p++ = (c)))
+#define STPUTC(c, p)	(--sstrnleft >= 0? (*p++ = (c)) : (p = growstackstr(), *p++ = (c)))
 #define CHECKSTRSPACE(n, p)	{ if (sstrnleft < n) p = makestrspace(); }
 #define USTPUTC(c, p)	(--sstrnleft, *p++ = (c))
-/*
- * STACKSTRNUL's use is where we want to be able to turn a stack
- * (non-sentinel, character counting string) into a C string,
- * and later pretend the NUL is not there.
- * Note: Because of STACKSTRNUL's semantics, STACKSTRNUL cannot be used
- * on a stack that will grabstackstr()ed.
- */
 #define STACKSTRNUL(p)	(sstrnleft == 0? (p = growstackstr(), *p = '\0') : (*p = '\0'))
 #define STUNPUTC(p)	(++sstrnleft, --p)
 #define STTOPC(p)	p[-1]
@@ -32,7 +32,7 @@
 .\"	from: @(#)sh.1	8.6 (Berkeley) 5/4/95
 .\" $FreeBSD$
 .\"
-.Dd October 31, 2010
+.Dd October 7, 2006
 .Dt SH 1
 .Os
 .Sh NAME
@@ -40,24 +40,9 @@
 .Nd command interpreter (shell)
 .Sh SYNOPSIS
 .Nm
-.Op Fl /+abCEefIimnPpTuVvx
+.Op Fl /+abCEefIimnPpsTuVvx
 .Op Fl /+o Ar longname
-.Oo
-.Ar script
-.Op Ar arg ...
-.Oc
-.Nm
-.Op Fl /+abCEefIimnPpTuVvx
-.Op Fl /+o Ar longname
-.Fl c Ar string
-.Oo
-.Ar name
-.Op Ar arg ...
-.Oc
-.Nm
-.Op Fl /+abCEefIimnPpTuVvx
-.Op Fl /+o Ar longname
-.Fl s
+.Op Fl c Ar string
 .Op Ar arg ...
 .Sh DESCRIPTION
 The
@@ -426,11 +411,11 @@ character, with the exception of the newline character
 .Pq Ql \en .
 A backslash preceding a newline is treated as a line continuation.
 .El
-.Ss Keywords
-Keywords or reserved words are words that have special meaning to the
+.Ss Reserved Words
+Reserved words are words that have special meaning to the
 shell and are recognized at the beginning of a line and
 after a control operator.
-The following are keywords:
+The following are reserved words:
 .Bl -column "doneXX" "elifXX" "elseXX" "untilXX" "whileX" -offset center
 .It Li \&! Ta { Ta } Ta Ic case Ta Ic do
 .It Ic done Ta Ic elif Ta Ic else Ta Ic esac Ta Ic fi
@@ -440,8 +425,8 @@ The following are keywords:
 An alias is a name and corresponding value set using the
 .Ic alias
 built-in command.
-Whenever a keyword may occur (see above),
-and after checking for keywords, the shell
+Whenever a reserved word may occur (see above),
+and after checking for reserved words, the shell
 checks the word to see if it matches an alias.
 If it does, it replaces it in the input stream with its value.
 For example, if there is an alias called
@@ -480,7 +465,7 @@ of this man page (refer to the BNF in the
 document).
 Essentially though, a line is read and if
 the first word of the line (or after a control operator)
-is not a keyword, then the shell has recognized a
+is not a reserved word, then the shell has recognized a
 simple command.
 Otherwise, a complex command or some
 other special construct may have been recognized.
@@ -700,7 +685,7 @@ Signal numbers are defined in the header file
 .In sys/signal.h .
 .Ss Complex Commands
 Complex commands are combinations of simple commands
-with control operators or keywords, together creating a larger complex
+with control operators or reserved words, together creating a larger complex
 command.
 More generally, a command is one of the following:
 .Bl -item -offset indent
@@ -741,17 +726,10 @@ both of a command is considered to be assigned by the
 pipeline before any redirection specified by redirection
 operators that are part of the command.
 .Pp
-Note that unlike some other shells,
-.Nm
-executes each process in a pipeline with more than one command
-in a subshell environment and as a child of the
-.Nm
-process.
-.Pp
 If the pipeline is not in the background (discussed later),
 the shell waits for all commands to complete.
 .Pp
-If the keyword
+If the reserved word
 .Ic !\&
 does not precede the pipeline, the
 exit status is the exit status of the last command specified
@@ -785,6 +763,15 @@ to be executed sequentially;
 an
 .Ql &
 causes asynchronous execution of the preceding AND-OR-list.
+.Pp
+Note that unlike some other shells,
+.Nm
+executes each process in the pipeline as a child of the
+.Nm
+process.
+Shell built-in commands are the exception to this rule.
+They are executed in the current shell, although they do not affect its
+environment when used in pipelines.
 .Ss Background Commands (&)
 If a command is terminated by the control operator ampersand
 .Pq Ql & ,
@@ -1114,12 +1101,7 @@ For a
 pipeline, the process ID is that of the last command in the
 pipeline.
 .It Li $0
-(zero) Expands to the name of the shell script if passed on the command line,
-the
-.Ar name
-operand if given (with
-.Fl c )
-or otherwise argument 0 passed to the shell.
+(zero) Expands to the name of the shell or shell script.
 .El
 .Ss Word Expansions
 This clause describes the various expansions that are
@@ -1160,7 +1142,7 @@ Quote Removal.
 The
 .Ql $
 character is used to introduce parameter expansion, command
-substitution, or arithmetic expansion.
+substitution, or arithmetic evaluation.
 .Ss Tilde Expansion (substituting a user's home directory)
 A word beginning with an unquoted tilde character
 .Pq Ql ~
@@ -1239,9 +1221,6 @@ In all cases, the
 final value of
 .Ar parameter
 is substituted.
-Quoting inside
-.Ar word
-does not prevent field splitting or pathname expansion.
 Only variables, not positional
 parameters or special parameters, can be
 assigned in this way.
@@ -1375,41 +1354,10 @@ The
 shell expands all tokens in the
 .Ar expression
 for parameter expansion,
-command substitution,
-arithmetic expansion
-and quote removal.
+command substitution, and quote removal.
 .Pp
-The allowed expressions are a subset of C expressions,
-summarized below.
-.Bl -tag -width "Variables" -offset indent
-.It Values
-All values are of type
-.Ft intmax_t .
-.It Constants
-Decimal, octal (starting with
-.Li 0 )
-and hexadecimal (starting with 
-.Li 0x )
-integer constants.
-.It Variables
-Shell variables can be read and written
-and contain integer constants.
-.It Unary operators
-.Li "! ~ + -"
-.It Binary operators
-.Li "* / % + - << >> < <= > >= == != & ^ | && ||"
-.It Assignment operators
-.Li "= += -= *= /= %= <<= >>= &= ^= |="
-.It Short-circuit evaluation
-The
-.Li &&
-and
-.Li ||
-operators always evaluate both sides.
-This is a bug.
-.El
-.Pp
-The result of the expression is substituted in decimal.
+Next, the shell treats this as an arithmetic expression and
+substitutes the value of the expression.
 .Ss White Space Splitting (Field Splitting)
 After parameter expansion, command substitution, and
 arithmetic expansion the shell scans the results of
@@ -2404,6 +2352,8 @@ will return the argument.
 .Xr echo 1 ,
 .Xr ed 1 ,
 .Xr emacs 1 ,
+.Xr expr 1 ,
+.Xr getopt 1 ,
 .Xr pwd 1 ,
 .Xr test 1 ,
 .Xr vi 1 ,
@@ -416,7 +416,7 @@ dotrap(void)
 					if (i == SIGCHLD)
 						ignore_sigchld++;
 					savestatus = exitstatus;
-					evalstring(trap[i], 0);
+					evalstring(trap[i]);
 					exitstatus = savestatus;
 					if (i == SIGCHLD)
 						ignore_sigchld--;
@@ -471,7 +471,7 @@ exitshell(int status)
 	handler = &loc1;
 	if ((p = trap[0]) != NULL && *p != '\0') {
 		trap[0] = NULL;
-		evalstring(p, 0);
+		evalstring(p);
 	}
 l1:   handler = &loc2;			/* probably unnecessary */
 	flushall();
@@ -523,8 +523,9 @@ var_compare(const void *a, const void *b)


 /*
- * Command to list all variables which are set.  This is invoked from the
- * set command when it is called without any options or operands.
+ * Command to list all variables which are set.  Currently this command
+ * is invoked from the set command when the set command is called without
+ * any variables.
 */

 int
@@ -759,7 +760,9 @@ setvarcmd(int argc, char **argv)


 /*
- * The unset builtin command.
+ * The unset builtin command.  We unset the function before we unset the
+ * variable to allow a function to be unset when there is a readonly variable
+ * with the same name.
 */

 int
@@ -0,0 +1,24 @@
+# $FreeBSD$
+
+OS/shell			syntax error	failed
+--------------------------------------------------------------------
+bash 1.14.5 			3		0
+pdksh 5.2.5			7		0
+zsh 2.6-beta17			6		4
+FreeBSD 2.1 /bin/test		8		0
+IRIX 5.3 ksh			3		0
+IRIX 5.3 sh			3		0
+IRIX 5.3 /usr/bin/test		11		3
+SunOS 5.4 ksh			3		0
+SunOS 5.4 sh			3		0
+SunOS 5.4 /usr/ucb/test		3		0
+SunOS 5.5 ksh			0		0
+SunOS 5.5 sh			3		0
+SunOS 5.5 /usr/ucb/test		3		0
+SunOS 4.1.3_U1 sh		3		0
+SunOS 4.1.3_U1 /usr/bin/test	3		0
+ULTRIX 4.2 /bin/test		9		0
+ULTRIX 4.2 ksh			1		0
+ULTRIX 4.2 sh5			4		0
+
+96/06/16
@@ -0,0 +1,152 @@
+#	@(#)TEST.csh	5.2 (Berkeley) 4/30/93
+# $FreeBSD$
+
+#alias t '/usr/src/bin/test/obj/test \!*; echo $status'
+alias t '/bin/test \!*; echo $status'
+
+echo 't -b /dev/ttyp2'
+t -b /dev/ttyp2
+echo 't -b /dev/jb1a'
+t -b /dev/jb1a
+
+echo 't -c test.c'
+t -c test.c
+echo 't -c /dev/tty'
+t -c /dev/tty
+
+echo 't -d test.c'
+t -d test.c
+echo 't -d /etc'
+t -d /etc
+
+echo 't -e noexist'
+t -e noexist
+echo 't -e test.c'
+t -e test.c
+
+echo 't -f noexist'
+t -f noexist
+echo 't -f /dev/tty'
+t -f /dev/tty
+echo 't -f test.c'
+t -f test.c
+
+echo 't -g test.c'
+t -g test.c
+echo 't -g /bin/ps'
+t -g /bin/ps
+
+echo 't -n ""'
+t -n ""
+echo 't -n "hello"'
+t -n "hello"
+
+echo 't -p test.c'
+t -p test.c
+
+echo 't -r noexist'
+t -r noexist
+echo 't -r /etc/master.passwd'
+t -r /etc/master.passwd
+echo 't -r test.c'
+t -r test.c
+
+echo 't -s noexist'
+t -s noexist
+echo 't -s /dev/null'
+t -s /dev/null
+echo 't -s test.c'
+t -s test.c
+
+echo 't -t 20'
+t -t 20
+echo 't -t 0'
+t -t 0
+
+echo 't -u test.c'
+t -u test.c
+echo 't -u /bin/rcp'
+t -u /bin/rcp
+
+echo 't -w noexist'
+t -w noexist
+echo 't -w /etc/master.passwd'
+t -w /etc/master.passwd
+echo 't -w /dev/null'
+t -w /dev/null
+
+echo 't -x noexist'
+t -x noexist
+echo 't -x /bin/ps'
+t -x /bin/ps
+echo 't -x /etc/motd'
+t -x /etc/motd
+
+echo 't -z ""'
+t -z ""
+echo 't -z "foo"'
+t -z "foo"
+
+echo 't "foo"'
+t "foo"
+echo 't ""'
+t ""
+
+echo 't "hello" = "hello"'
+t "hello" = "hello"
+echo 't "hello" = "goodbye"'
+t "hello" = "goodbye"
+
+echo 't "hello" != "hello"'
+t "hello" != "hello"
+echo 't "hello" != "goodbye"'
+t "hello" != "goodbye"
+
+echo 't 200 -eq 200'
+t 200 -eq 200
+echo 't 34 -eq 222'
+t 34 -eq 222
+
+echo 't 200 -ne 200'
+t 200 -ne 200
+echo 't 34 -ne 222'
+t 34 -ne 222
+
+echo 't 200 -gt 200'
+t 200 -gt 200
+echo 't 340 -gt 222'
+t 340 -gt 222
+
+echo 't 200 -ge 200'
+t 200 -ge 200
+echo 't 34 -ge 222'
+t 34 -ge 222
+
+echo 't 200 -lt 200'
+t 200 -lt 200
+echo 't 34 -lt 222'
+t 34 -lt 222
+
+echo 't 200 -le 200'
+t 200 -le 200
+echo 't 340 -le 222'
+t 340 -le 222
+
+echo 't 700 -le 1000 -a -n "1" -a "20" = "20"'
+t 700 -le 1000 -a -n "1" -a "20" = "20"
+echo 't ! \( 700 -le 1000 -a -n "1" -a "20" = "20" \)'
+t ! \( 700 -le 1000 -a -n "1" -a "20" = "20" \)
+
+echo 't -5 -eq 5'
+t -5 -eq 5
+
+
+echo 't foo -a ""'
+t foo -a ""
+echo 't "" -a foo'
+t "" -a foo
+echo 't "" -a ""'
+t "" -a ""
+echo 't "" -o ""'
+t "" -o ""
+
@@ -30,29 +30,44 @@
 #
 # $FreeBSD$

-# force a specified test program, e.g. `env test=/bin/test sh regress.sh'
+# force a specified test program, e.g. `env test=/bin/test sh TEST.sh'
 : ${test=test}		

+ERROR=0 FAILED=0
+
 t ()
 {
 	# $1 -> exit code
 	# $2 -> $test expression

-	count=$((count+1))
+	echo -n "$1: $test $2 "
+
 	# check for syntax errors
 	syntax="`eval $test $2 2>&1`"
-	ret=$?
-	if test -n "$syntax"; then
-		printf "not ok %s - (syntax error)\n" "$count $2"
-	elif [ "$ret" != "$1" ]; then
-		printf "not ok %s - (got $ret, expected $1)\n" "$count $2"
+	if test -z "$syntax"; then
+
+	case $1 in
+		0) if eval $test $2; then echo " OK"; else failed;fi;;
+		1) if eval $test $2; then failed; else echo " OK";fi;;
+	esac
+
 	else
-		printf "ok %s\n" "$count $2"
+		error
 	fi
 }

-count=0
-echo "1..94"
+error () 
+{
+	echo ""; echo "	$syntax"
+	ERROR=`expr $ERROR + 1`
+}
+
+failed () 
+{
+	echo ""; echo "	failed"
+	FAILED=`expr $FAILED + 1`
+}
+

 t 0 'b = b' 
 t 1 'b != b' 
@@ -118,42 +133,5 @@ t 0 '"a" -a ! ""'
 t 1 '""'
 t 0 '! ""'

-t 0 '!'
-t 0 '\('
-t 0 '\)'
-
-t 1 '\( = \)'
-t 0 '\( != \)'
-t 0 '\( ! \)'
-t 0 '\( \( \)'
-t 0 '\( \) \)'
-t 0 '! = !'
-t 1 '! != !'
-t 1 '-n = \)'
-t 0 '! != \)'
-t 1 '! = a'
-t 0 '! != -n'
-t 0 '! -c /etc/passwd'
-
-t 0 '! \( = \)'
-t 1 '! \( != \)'
-t 1 '! = = ='
-t 0 '! = = \)'
-t 0 '! "" -o ""'
-t 1 '! "x" -o ""'
-t 1 '! "" -o "x"'
-t 1 '! "x" -o "x"'
-t 0 '\( -f /etc/passwd \)'
-t 1 '\( ! = \)'
-t 0 '\( ! "" \)'
-t 1 '\( ! -e \)'
-
-t 0 '0 -eq 0 -a -d /'
-t 0 '-s = "" -o "" = ""'
-t 0 '"" = "" -o -s = ""'
-t 1 '-s = "" -o -s = ""'
-t 0 '-z x -o x = "#" -o x = x'
-t 1 '-z y -o y = "#" -o y = x'
-t 0 '0 -ne 0 -o ! -f /'
-t 0 '1 -ne 0 -o ! -f /etc/passwd'
-t 1 '0 -ne 0 -o ! -f /etc/passwd'
+echo ""
+echo "Syntax errors: $ERROR Failed: $FAILED"
@@ -32,7 +32,7 @@
 .\"     @(#)test.1	8.1 (Berkeley) 5/31/93
 .\" $FreeBSD$
 .\"
-.Dd September 10, 2010
+.Dd July 31, 2006
 .Dt TEST 1
 .Os
 .Sh NAME
@@ -282,7 +282,7 @@ True if either
 or
 .Ar expression2
 are true.
-.It Cm \&( Ar expression Cm \&)
+.It Cm \&( Ns Ar expression Ns Cm \&)
 True if expression is true.
 .El
 .Pp
@@ -310,14 +310,6 @@ are evaluated consistently according to the rules specified in the
 standards document.
 All other cases are subject to the ambiguity in the
 command semantics.
-.Pp
-In particular, only expressions containing
-.Fl a ,
-.Fl o ,
-.Cm \&(
-or
-.Cm \&)
-can be ambiguous.
 .Sh EXIT STATUS
 The
 .Nm
@@ -346,11 +338,12 @@ specification.
 Both sides are always evaluated in
 .Fl a
 and
-.Fl o .
+.Fl o ,
+unlike in the logical operators of
+.Xr sh 1 .
 For instance, the writable status of
 .Pa file
 will be tested by the following command even though the former expression
 indicated false, which results in a gratuitous access to the file system:
+.Pp
 .Dl "[ -z abc -a -w file ]"
-To avoid this, write
-.Dl "[ -z abc ] && [ -w file ]"
@@ -9,10 +9,6 @@
 *
 * This program is in the Public Domain.
 */
-/*
- * Important: This file is used both as a standalone program /bin/test and
- * as a builtin for /bin/sh (#define SHELL).
- */

 #include <sys/cdefs.h>
 __FBSDID("$FreeBSD$");
@@ -167,7 +163,6 @@ struct t_op {
 struct t_op const *t_wp_op;
 int nargc;
 char **t_wp;
-int parenlevel;

 static int	aexpr(enum token);
 static int	binop(void);
@@ -176,9 +171,7 @@ static int	filstat(char *, enum token);
 static int	getn(const char *);
 static intmax_t	getq(const char *);
 static int	intcmp(const char *, const char *);
-static int	isunopoperand(void);
-static int	islparenoperand(void);
-static int	isrparenoperand(void);
+static int	isoperand(void);
 static int	newerf(const char *, const char *);
 static int	nexpr(enum token);
 static int	oexpr(enum token);
@@ -212,14 +205,7 @@ main(int argc, char **argv)
 #endif
 	nargc = argc;
 	t_wp = &argv[1];
-	parenlevel = 0;
-	if (nargc == 4 && strcmp(*t_wp, "!") == 0) {
-		/* Things like ! "" -o x do not fit in the normal grammar. */
-		--nargc;
-		++t_wp;
-		res = oexpr(t_lex(*t_wp));
-	} else
-		res = !oexpr(t_lex(*t_wp));
+	res = !oexpr(t_lex(*t_wp));

 	if (--nargc > 0)
 		syntax(*t_wp, "unexpected operator");
@@ -282,16 +268,12 @@ primary(enum token n)
 	if (n == EOI)
 		return 0;		/* missing expression */
 	if (n == LPAREN) {
-		parenlevel++;
 		if ((nn = t_lex(nargc > 0 ? (--nargc, *++t_wp) : NULL)) ==
-		    RPAREN) {
-			parenlevel--;
+		    RPAREN)
 			return 0;	/* missing expression */
-		}
 		res = oexpr(nn);
 		if (t_lex(nargc > 0 ? (--nargc, *++t_wp) : NULL) != RPAREN)
 			syntax(NULL, "closing paren expected");
-		parenlevel--;
 		return res;
 	}
 	if (t_wp_op && t_wp_op->op_type == UNOP) {
@@ -428,10 +410,8 @@ t_lex(char *s)
 	}
 	while (op->op_text) {
 		if (strcmp(s, op->op_text) == 0) {
-			if (((op->op_type == UNOP || op->op_type == BUNOP)
-						&& isunopoperand()) ||
-			    (op->op_num == LPAREN && islparenoperand()) ||
-			    (op->op_num == RPAREN && isrparenoperand()))
+			if ((op->op_type == UNOP && isoperand()) ||
+			    (op->op_num == LPAREN && nargc == 1))
 				break;
 			t_wp_op = op;
 			return op->op_num;
@@ -443,7 +423,7 @@ t_lex(char *s)
 }

 static int
-isunopoperand(void)
+isoperand(void)
 {
 	struct t_op const *op = ops;
 	char *s;
@@ -451,53 +431,19 @@ isunopoperand(void)

 	if (nargc == 1)
 		return 1;
-	s = *(t_wp + 1);
 	if (nargc == 2)
-		return parenlevel == 1 && strcmp(s, ")") == 0;
+		return 0;
+	s = *(t_wp + 1);
 	t = *(t_wp + 2);
 	while (op->op_text) {
 		if (strcmp(s, op->op_text) == 0)
 			return op->op_type == BINOP &&
-			    (parenlevel == 0 || t[0] != ')' || t[1] != '\0');
+			    (t[0] != ')' || t[1] != '\0');
 		op++;
 	}
 	return 0;
 }

-static int
-islparenoperand(void)
-{
-	struct t_op const *op = ops;
-	char *s;
-
-	if (nargc == 1)
-		return 1;
-	s = *(t_wp + 1);
-	if (nargc == 2)
-		return parenlevel == 1 && strcmp(s, ")") == 0;
-	if (nargc != 3)
-		return 0;
-	while (op->op_text) {
-		if (strcmp(s, op->op_text) == 0)
-			return op->op_type == BINOP;
-		op++;
-	}
-	return 0;
-}
-
-static int
-isrparenoperand(void)
-{
-	char *s;
-
-	if (nargc == 1)
-		return 0;
-	s = *(t_wp + 1);
-	if (nargc == 2)
-		return parenlevel == 1 && strcmp(s, ")") == 0;
-	return 0;
-}
-
 /* atoi with error detection */
 static int
 getn(const char *s)
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd May 23, 2012
+.Dd September 7, 2005
 .Dt UUIDGEN 1
 .Os
 .Sh NAME
@@ -52,11 +52,8 @@ instructs
 to not generate them in batch, but one at a time.
 .It Fl n
 This option controls the number of identifiers generated.
-By default, multiple identifiers are generated in batch.
-The upper hard limit is 2048
-.Po see
-.Xr uuidgen 2
-.Pc .
+By default, multiple
+identifiers are generated in batch.
 .It Fl o
 Redirect output to
 .Ar filename
@@ -95,10 +95,8 @@ zmount(const char *spec, const char *dir, int mflag, char *fstype,
 	build_iovec(&iov, &iovlen, "fspath", __DECONST(char *, dir),
 	    (size_t)-1);
 	build_iovec(&iov, &iovlen, "from", __DECONST(char *, spec), (size_t)-1);
-	for (p = optstr; p != NULL; strsep(&p, ",/ ")) {
-		if (*p != '\0')
-			build_iovec(&iov, &iovlen, p, NULL, (size_t)-1);
-	}
+	for (p = optstr; p != NULL; strsep(&p, ",/ "))
+		build_iovec(&iov, &iovlen, p, NULL, (size_t)-1);
 	rv = nmount(iov, iovlen, 0);
 	free(optstr);
 	return (rv);
@@ -19,7 +19,7 @@
 * CDDL HEADER END
 */
 /*
- * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
+ * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

@@ -93,7 +93,6 @@
 #include <sys/vdev_file.h>
 #include <sys/spa_impl.h>
 #include <sys/dsl_prop.h>
-#include <sys/dsl_dataset.h>
 #include <sys/refcount.h>
 #include <stdio.h>
 #include <stdio_ext.h>
@@ -175,7 +174,6 @@ ztest_func_t ztest_traverse;
 ztest_func_t ztest_dsl_prop_get_set;
 ztest_func_t ztest_dmu_objset_create_destroy;
 ztest_func_t ztest_dmu_snapshot_create_destroy;
-ztest_func_t ztest_dsl_dataset_promote_busy;
 ztest_func_t ztest_spa_create_destroy;
 ztest_func_t ztest_fault_inject;
 ztest_func_t ztest_spa_rename;
@@ -210,7 +208,6 @@ ztest_info_t ztest_info[] = {
 	{ ztest_dsl_prop_get_set,		1,	&zopt_sometimes	},
 	{ ztest_dmu_objset_create_destroy,	1,	&zopt_sometimes },
 	{ ztest_dmu_snapshot_create_destroy,	1,	&zopt_sometimes },
-	{ ztest_dsl_dataset_promote_busy,	1,	&zopt_sometimes },
 	{ ztest_spa_create_destroy,		1,	&zopt_sometimes },
 	{ ztest_fault_inject,			1,	&zopt_sometimes	},
 	{ ztest_spa_rename,			1,	&zopt_rarely	},
@@ -1594,109 +1591,6 @@ ztest_traverse(ztest_args_t *za)
 	}
 }

-/*
- * Verify dsl_dataset_promote handles EBUSY
- */
-void
-ztest_dsl_dataset_promote_busy(ztest_args_t *za)
-{
-	int error;
-	objset_t *os = za->za_os;
-	objset_t *clone;
-	dsl_dataset_t *ds;
-	char snap1name[100];
-	char clone1name[100];
-	char snap2name[100];
-	char clone2name[100];
-	char snap3name[100];
-	char osname[MAXNAMELEN];
-	static uint64_t uniq = 0;
-	uint64_t curval;
-
-	curval = atomic_add_64_nv(&uniq, 5) - 5;
-
-	(void) rw_rdlock(&ztest_shared->zs_name_lock);
-
-	dmu_objset_name(os, osname);
-	(void) snprintf(snap1name, 100, "%s@s1_%llu", osname, curval++);
-	(void) snprintf(clone1name, 100, "%s/c1_%llu", osname, curval++);
-	(void) snprintf(snap2name, 100, "%s@s2_%llu", clone1name, curval++);
-	(void) snprintf(clone2name, 100, "%s/c2_%llu", osname, curval++);
-	(void) snprintf(snap3name, 100, "%s@s3_%llu", clone1name, curval++);
-
-	error = dmu_objset_snapshot(osname, strchr(snap1name, '@')+1, FALSE);
-	if (error == ENOSPC)
-		ztest_record_enospc("dmu_take_snapshot");
-	else if (error != 0 && error != EEXIST)
-		fatal(0, "dmu_take_snapshot = %d", error);
-
-	error = dmu_objset_open(snap1name, DMU_OST_OTHER,
-	    DS_MODE_USER | DS_MODE_READONLY, &clone);
-	if (error)
-		fatal(0, "dmu_open_snapshot(%s) = %d", snap1name, error);
-
-	error = dmu_objset_create(clone1name, DMU_OST_OTHER, clone, 0,
-	    NULL, NULL);
-	if (error)
-		fatal(0, "dmu_objset_create(%s) = %d", clone1name, error);
-	dmu_objset_close(clone);
-
-	error = dmu_objset_snapshot(clone1name, strchr(snap2name, '@')+1,
-	    FALSE);
-	if (error == ENOSPC)
-		ztest_record_enospc("dmu_take_snapshot");
-	else if (error != 0 && error != EEXIST)
-		fatal(0, "dmu_take_snapshot = %d", error);
-
-	error = dmu_objset_snapshot(clone1name, strchr(snap3name, '@')+1,
-	    FALSE);
-	if (error == ENOSPC)
-		ztest_record_enospc("dmu_take_snapshot");
-	else if (error != 0 && error != EEXIST)
-		fatal(0, "dmu_take_snapshot = %d", error);
-
-	error = dmu_objset_open(snap3name, DMU_OST_OTHER,
-	    DS_MODE_USER | DS_MODE_READONLY, &clone);
-	if (error)
-		fatal(0, "dmu_open_snapshot(%s) = %d", snap3name, error);
-
-	error = dmu_objset_create(clone2name, DMU_OST_OTHER, clone, 0,
-	    NULL, NULL);
-	if (error)
-		fatal(0, "dmu_objset_create(%s) = %d", clone2name, error);
-	dmu_objset_close(clone);
-
-	error = dsl_dataset_own(snap1name, 0, FTAG, &ds);
-	if (error)
-		fatal(0, "dsl_dataset_own(%s) = %d", snap1name, error);
-	error = dsl_dataset_promote(clone2name);
-	if (error != EBUSY)
-		fatal(0, "dsl_dataset_promote(%s), %d, not EBUSY", clone2name,
-		    error);
-	dsl_dataset_disown(ds, FTAG);
-
-	error = dmu_objset_destroy(clone2name);
-	if (error)
-		fatal(0, "dmu_objset_destroy(%s) = %d", clone2name, error);
-
-	error = dmu_objset_destroy(snap3name);
-	if (error)
-		fatal(0, "dmu_objset_destroy(%s) = %d", snap2name, error);
-
-	error = dmu_objset_destroy(snap2name);
-	if (error)
-		fatal(0, "dmu_objset_destroy(%s) = %d", snap2name, error);
-
-	error = dmu_objset_destroy(clone1name);
-	if (error)
-		fatal(0, "dmu_objset_destroy(%s) = %d", clone1name, error);
-	error = dmu_objset_destroy(snap1name);
-	if (error)
-		fatal(0, "dmu_objset_destroy(%s) = %d", snap1name, error);
-
-	(void) rw_unlock(&ztest_shared->zs_name_lock);
-}
-
 /*
 * Verify that dmu_object_{alloc,free} work as expected.
 */
@@ -137,7 +137,6 @@ typedef struct dt_module {
 	dt_idhash_t *dm_extern;	/* external symbol definitions */
 #if !defined(sun)
 	caddr_t dm_reloc_offset;	/* Symbol relocation offset. */
-	uintptr_t *dm_sec_offsets;
 #endif
 } dt_module_t;

@@ -45,7 +45,7 @@
 #undef input
 #undef unput
 #else
-/*
+/* 
 * Define YY_INPUT for flex since input() can't be re-defined.
 */
 #define YY_INPUT(buf,result,max_size) \
@@ -60,19 +60,6 @@
 			buf[n] = *yypcb->pcb_strptr++; \
 		result = n; \
 	}
-/*
- * Do not EOF let tokens to be put back. This does not work with flex.
- * On the other hand, leaving current buffer in same state it was when
- * last EOF was received guarantees that input() will keep returning EOF
- * for all subsequent invocations, which is the effect desired.
- */
-#undef  unput
-#define unput(c)					\
-	do {						\
-		int _c = c;				\
-		if (_c != EOF)				\
-			yyunput(_c, yytext_ptr);	\
-	} while(0)
 #endif

 static int id_or_type(const char *);
@@ -83,14 +83,6 @@ dt_module_syminit32(dt_module_t *dmp)
 	uint_t i, n = dmp->dm_nsymelems;
 	uint_t asrsv = 0;

-#if defined(__FreeBSD__)
-	GElf_Ehdr ehdr;
-	int is_elf_obj;
-
-	gelf_getehdr(dmp->dm_elf, &ehdr);
-	is_elf_obj = (ehdr.e_type == ET_REL);
-#endif
-
 	for (i = 0; i < n; i++, sym++) {
 		const char *name = base + sym->st_name;
 		uchar_t type = ELF32_ST_TYPE(sym->st_info);
@@ -105,12 +97,8 @@ dt_module_syminit32(dt_module_t *dmp)
 		    (ELF32_ST_BIND(sym->st_info) != STB_LOCAL || sym->st_size)) {
 			asrsv++; /* reserve space in the address map */

-#if defined(__FreeBSD__)
+#if !defined(sun)
 			sym->st_value += (Elf_Addr) dmp->dm_reloc_offset;
-			if (is_elf_obj && sym->st_shndx != SHN_UNDEF &&
-			    sym->st_shndx < ehdr.e_shnum)
-				sym->st_value +=
-				    dmp->dm_sec_offsets[sym->st_shndx];
 #endif
 		}

@@ -129,14 +117,6 @@ dt_module_syminit64(dt_module_t *dmp)
 	uint_t i, n = dmp->dm_nsymelems;
 	uint_t asrsv = 0;

-#if defined(__FreeBSD__)
-	GElf_Ehdr ehdr;
-	int is_elf_obj;
-
-	gelf_getehdr(dmp->dm_elf, &ehdr);
-	is_elf_obj = (ehdr.e_type == ET_REL);
-#endif
-
 	for (i = 0; i < n; i++, sym++) {
 		const char *name = base + sym->st_name;
 		uchar_t type = ELF64_ST_TYPE(sym->st_info);
@@ -150,12 +130,9 @@ dt_module_syminit64(dt_module_t *dmp)
 		if (sym->st_value != 0 &&
 		    (ELF64_ST_BIND(sym->st_info) != STB_LOCAL || sym->st_size)) {
 			asrsv++; /* reserve space in the address map */
-#if defined(__FreeBSD__)
+
+#if !defined(sun)
 			sym->st_value += (Elf_Addr) dmp->dm_reloc_offset;
-			if (is_elf_obj && sym->st_shndx != SHN_UNDEF &&
-			    sym->st_shndx < ehdr.e_shnum)
-				sym->st_value +=
-				    dmp->dm_sec_offsets[sym->st_shndx];
 #endif
 		}

@@ -745,12 +722,7 @@ dt_module_unload(dtrace_hdl_t *dtp, dt_module_t *dmp)
 		free(dmp->dm_asmap);
 		dmp->dm_asmap = NULL;
 	}
-#if defined(__FreeBSD__)
-	if (dmp->dm_sec_offsets != NULL) {
-		free(dmp->dm_sec_offsets);
-		dmp->dm_sec_offsets = NULL;
-	}
-#endif
+
 	dmp->dm_symfree = 0;
 	dmp->dm_nsymbuckets = 0;
 	dmp->dm_nsymelems = 0;
@@ -874,12 +846,9 @@ dt_module_update(dtrace_hdl_t *dtp, struct kld_file_stat *k_stat)
 	(void) snprintf(fname, sizeof (fname),
 	    "%s/%s/object", OBJFS_ROOT, name);
 #else
-	GElf_Ehdr ehdr;
 	GElf_Phdr ph;
 	char name[MAXPATHLEN];
-	uintptr_t mapbase, alignmask;
 	int i = 0;
-	int is_elf_obj;

 	(void) strlcpy(name, k_stat->name, sizeof(name));
 	(void) strlcpy(fname, k_stat->pathname, sizeof(fname));
@@ -924,20 +893,7 @@ dt_module_update(dtrace_hdl_t *dtp, struct kld_file_stat *k_stat)
 		dt_module_destroy(dtp, dmp);
 		return;
 	}
-#if defined(__FreeBSD__)
-	mapbase = (uintptr_t)k_stat->address;
-	gelf_getehdr(dmp->dm_elf, &ehdr);
-	is_elf_obj = (ehdr.e_type == ET_REL);
-	if (is_elf_obj) {
-		dmp->dm_sec_offsets =
-		    malloc(ehdr.e_shnum * sizeof(*dmp->dm_sec_offsets));
-		if (dmp->dm_sec_offsets == NULL) {
-			dt_dprintf("failed to allocate memory\n");
-			dt_module_destroy(dtp, dmp);
-			return;
-		}
-	}
-#endif
+
 	/*
 	 * Iterate over the section headers locating various sections of
 	 * interest and use their attributes to flesh out the dt_module_t.
@@ -946,19 +902,7 @@ dt_module_update(dtrace_hdl_t *dtp, struct kld_file_stat *k_stat)
 		if (gelf_getshdr(sp, &sh) == NULL || sh.sh_type == SHT_NULL ||
 		    (s = elf_strptr(dmp->dm_elf, shstrs, sh.sh_name)) == NULL)
 			continue; /* skip any malformed sections */
-#if defined(__FreeBSD__)
-		if (sh.sh_size == 0)
-			continue;
-		if (is_elf_obj && (sh.sh_type == SHT_PROGBITS ||
-		    sh.sh_type == SHT_NOBITS)) {
-			alignmask = sh.sh_addralign - 1;
-			mapbase += alignmask;
-			mapbase &= ~alignmask;
-			sh.sh_addr = mapbase;
-			dmp->dm_sec_offsets[elf_ndxscn(sp)] = sh.sh_addr;
-			mapbase += sh.sh_size;
-		}
-#endif
+
 		if (strcmp(s, ".text") == 0) {
 			dmp->dm_text_size = sh.sh_size;
 			dmp->dm_text_va = sh.sh_addr;
@@ -983,13 +927,6 @@ dt_module_update(dtrace_hdl_t *dtp, struct kld_file_stat *k_stat)
 #if defined(sun)
 	dmp->dm_modid = (int)OBJFS_MODID(st.st_ino);
 #else
-	/*
-	 * Include .rodata and special sections into .text.
-	 * This depends on default section layout produced by GNU ld
-	 * for ELF objects and libraries:
-	 * [Text][R/O data][R/W data][Dynamic][BSS][Non loadable]
-	 */
-	dmp->dm_text_size = dmp->dm_data_va - dmp->dm_text_va;
 #if defined(__i386__)
 	/*
 	 * Find the first load section and figure out the relocation
@@ -644,7 +644,7 @@ write_file(Elf *src, const char *srcname, Elf *dst, const char *dstname,
 		}

 #if !defined(sun)
-		if (ddata->d_buf == NULL && sdata->d_buf != NULL) {
+		if (ddata->d_buf == NULL) {
 			ddata->d_buf = xmalloc(shdr.sh_size);
 			bcopy(sdata->d_buf, ddata->d_buf, shdr.sh_size);
 		}
@@ -11,7 +11,7 @@
 # LIST_SRCS
 .PATH: ${.CURDIR}/../../../sys/cddl/contrib/opensolaris/uts/common/os
 # ATOMIC_SRCS
-.if ${MACHINE_ARCH} == "i386" || ${MACHINE_ARCH} == "amd64" || ${MACHINE_ARCH} == "ia64" || ${MACHINE_ARCH} == "sparc64"
+.if ${MACHINE_ARCH} == "i386" || ${MACHINE_ARCH} == "amd64" || ${MACHINE_ARCH} == "ia64"
 .PATH: ${.CURDIR}/../../../sys/cddl/contrib/opensolaris/common/atomic/${MACHINE_ARCH}
 ATOMIC_SRCS=	opensolaris_atomic.S
 .else
@@ -1,154 +1,3 @@
-	--- 9.4-ESV-R5-P1 released ---
-
-3218.	[security]	Cache lookup could return RRSIG data associated with
-			nonexistent records, leading to an assertion
-			failure. [RT #26590]
-
-	--- 9.4-ESV-R5 released ---
-
-3135.	[port]		FreeBSD: workaround broken IPV6_USE_MIN_MTU processing.
-			See http://www.freebsd.org/cgi/query-pr.cgi?pr=158307
-			[RT #24950]
-
-3023.	[bug]		Named could be left in an inconsistent state when
-			receiving multiple AXFR response messages that were
-			not all TSIG-signed. [RT #23254]
-
-	--- 9.4-ESV-R5rc1 released ---
-
-3124.	[bug]		Use an rdataset attribute flag to indicate
-			negative-cache records rather than using rrtype 0;
-			this will prevent problems when that rrtype is
-			used in actual DNS packets. [RT #24777]
-
-3121.   [security]      An authoritative name server sending a negative
-                        response containing a very large RRset could
-                        trigger an off-by-one error in the ncache code
-                        and crash named. [RT #24650]
-
-3120.	[bug]		Named could fail to validate zones list in a DLV
-			that validated insecure without using DLV and had
-			DS records in the parent zone. [RT #24631]
-
-3113.	[doc]		Document the relationship between serial-query-rate
-			and NOTIFY messages.
-
-	--- 9.4-ESV-R5b1 released ---
-
-3095.	[bug]		Handle isolated reserved ports in the port range.
-			[RT #23957]
-
-3088.   [bug]           Remove bin/tests/system/logfileconfig/ns1/named.conf
-                        and add setup.sh in order to resolve changing
-                        named.conf issue.  [RT #23687]
-
-3071.	[bug]		has_nsec could be used unintialised in
-			update.c:next_active. [RT #20256]
-
-3067.	[bug]		ixfr-from-differences {master|slave}; failed to
-			select the master/slave zones.  [RT #23580]
-
-3065.	[bug]		RRSIG could have time stamps too far in the future.
-			[RT #23356]
-
-3064.	[bug]		powerpc: add sync instructions to the end of atomic
-			operations. [RT #23469]
-
-3058.   [bug]           Cause named to terminate at startup or rndc reconfig/
-                        reload to fail, if a log file specified in the conf
-                        file isn't a plain file. [RT #22771]
-
-3051.	[bug]		NS records obsure DNAME records at the bottom of the
-			zone if both are present. [RT #23035]
-
-3041.	[bug]		dnssec-signzone failed to generate new signatures on
-			ttl changes. [RT #23330]
-
-3040.	[bug]		Named failed to validate insecure zones where a node
-			with a CNAME existed between the trust anchor and the
-			top of the zone. [RT #23338]
-
-3037.	[doc]		Update COPYRIGHT to contain all the individual
-			copyright notices that cover various parts.
-
-3014.	[bug]		Fix the zonechecks system test to match expected
-			behaviour for 9.4 and to fail on error. [RT #22905]
-
-3009.	[bug]		clients-per-query code didn't work as expected with
-			particular query patterns. [RT #22972]
-
-3007.	[bug]		Named failed to preserve the case of domain names in
-			rdata which is not compressible when writing master
-			files.  [RT #22863]
-
-2996.	[security]	Temporarily disable SO_ACCEPTFILTER support.
-			[RT #22589]
-
-	--- 9.4-ESV-R4 released ---
-
-2970.	[security]	Adding a NO DATA negative cache entry failed to clear
-			any matching RRSIG records.  A subsequent lookup of
-			of NO DATA cache entry could trigger a INSIST when the
-			unexpected RRSIG was also returned with the NO DATA
-			cache entry.
-
-			CVE-2010-3613, VU#706148. [RT #22288]
-
-2968.	[security]	Named could fail to prove a data set was insecure
-			before marking it as insecure.  One set of conditions
-			that can trigger this occurs naturally when rolling
-			DNSKEY algorithms.
-
-			CVE-2010-3614, VU#837744. [RT #22309]
-
-2966.	[bug]		isc_print_vsnprintf() failed to check if there was
-			space available in the buffer when adding a left
-			justified character with a non zero width,
-			(e.g. "%-1c"). [RT #22270]
-
-2962.	[port]		win32: add more dependancies to BINDBuild.dsw.
-			[RT #22062]
-
-2786.	[bug]		Additional could be promoted to answer. [RT #20663]
-
-	--- 9.4-ESV-R3 released ---
-
-2925.	[bug]		Named failed to accept uncachable negative responses
-			from insecure zones. [RT# 21555]
-
-2921.	[bug]		The resolver could attempt to destroy a fetch context
-			too soon.  [RT #19878]
-
-2904.   [bug]           When using DLV, sub-zones of the zones in the DLV,
-			could be incorrectly marked as insecure instead of
-			secure leading to negative proofs failing.  This was
-			a unintended outcome from change 2890. [RT# 21392]
-
-2900.	[bug]	 	The placeholder negative caching element was not
-			properly constructed triggering a INSIST in 
-			dns_ncache_towire(). [RT #21346]
-
-2890.	[bug]		Handle the introduction of new trusted-keys and
-			DS, DLV RRsets better. [RT #21097]
-
-2869.	[bug]		Fix arguments to dns_keytable_findnextkeynode() call.
-			[RT #20877]
-
-2678.	[func]		Treat DS queries as if "minimal-response yes;"
-			was set. [RT #20258]
-
-2427.	[func]		Treat DNSKEY queries as if "minimal-response yes;"
-			was set. [RT #18528]
-
-	--- 9.4-ESV-R2 released ---
-
-2876.	[bug]		Named could return SERVFAIL for negative responses
-			from unsigned zones. [RT #21131]
-
-	--- 9.4-ESV-R1 released ---
-
-2852.	[bug]		Handle broken DNSSEC trust chains better. [RT #15619]
-
 	--- 9.4-ESV released ---

 2831.	[security]	Do not attempt to validate or cache
@@ -1,4 +1,4 @@
-Copyright (C) 2004-2011  Internet Systems Consortium, Inc. ("ISC")
+Copyright (C) 2004-2010  Internet Systems Consortium, Inc. ("ISC")
 Copyright (C) 1996-2003  Internet Software Consortium.

 Permission to use, copy, modify, and/or distribute this software for any
@@ -13,15 +13,9 @@ LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
 OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 PERFORMANCE OF THIS SOFTWARE.

-$Id: COPYRIGHT,v 1.9.18.9 2011-02-22 06:45:07 marka Exp $
+$Id: COPYRIGHT,v 1.9.18.7 2010/01/07 23:46:07 tbox Exp $

-	Portions of this code release fall under one or more of the
-	following Copyright notices.  Please see individual source
-	files for details.
-
-	For binary releases also see: OpenSSL-LICENSE.
-
-Copyright (C) 1996-2001  Nominum, Inc.
+Portions Copyright (C) 1996-2001  Nominum, Inc.

 Permission to use, copy, modify, and distribute this software for any
 purpose with or without fee is hereby granted, provided that the above
@@ -34,485 +28,3 @@ ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
 OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 1995-2000 by Network Associates, Inc.
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND ISC AND NETWORK ASSOCIATES DISCLAIMS
-ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE
-FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
-IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 2002 Stichting NLnet, Netherlands, [email protected].
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the
-above copyright notice and this permission notice appear in all
-copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND STICHTING NLNET
-DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
-STICHTING NLNET BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
-CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
-OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
-USE OR PERFORMANCE OF THIS SOFTWARE.
-
-The development of Dynamically Loadable Zones (DLZ) for Bind 9 was
-conceived and contributed by Rob Butler.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the
-above copyright notice and this permission notice appear in all
-copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND ROB BUTLER
-DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
-ROB BUTLER BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
-CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
-OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
-USE OR PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1987, 1990, 1993, 1994
-     The Regents of the University of California.  All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. All advertising materials mentioning features or use of this software
-   must display the following acknowledgement:
-     This product includes software developed by the University of
-     California, Berkeley and its contributors.
-4. Neither the name of the University nor the names of its contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) The Internet Society 2005.  This version of
-this module is part of RFC 4178; see the RFC itself for
-full legal notices.
-
-(The above copyright notice is per RFC 3978 5.6 (a), q.v.)
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 2004 Masarykova universita
-(Masaryk University, Brno, Czech Republic)
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-3. Neither the name of the University nor the names of its contributors may
-   be used to endorse or promote products derived from this software
-   without specific prior written permission.
- 
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1997 - 2003 Kungliga Tekniska Högskolan
-(Royal Institute of Technology, Stockholm, Sweden). 
-All rights reserved. 
-
-Redistribution and use in source and binary forms, with or without 
-modification, are permitted provided that the following conditions 
-are met: 
-
-1. Redistributions of source code must retain the above copyright 
-   notice, this list of conditions and the following disclaimer. 
-
-2. Redistributions in binary form must reproduce the above copyright 
-   notice, this list of conditions and the following disclaimer in the 
-   documentation and/or other materials provided with the distribution. 
-
-3. Neither the name of the Institute nor the names of its contributors 
-   may be used to endorse or promote products derived from this software 
-   without specific prior written permission. 
-
-THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
-ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
-SUCH DAMAGE. 
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1998 Doug Rabson
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright ((c)) 2002, Rice University
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-    * Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-
-    * Redistributions in binary form must reproduce the above
-    copyright notice, this list of conditions and the following
-    disclaimer in the documentation and/or other materials provided
-    with the distribution.
-
-    * Neither the name of Rice University (RICE) nor the names of its
-    contributors may be used to endorse or promote products derived
-    from this software without specific prior written permission.
-
-
-This software is provided by RICE and the contributors on an "as is"
-basis, without any representations or warranties of any kind, express
-or implied including, but not limited to, representations or
-warranties of non-infringement, merchantability or fitness for a
-particular purpose. In no event shall RICE or contributors be liable
-for any direct, indirect, incidental, special, exemplary, or
-consequential damages (including, but not limited to, procurement of
-substitute goods or services; loss of use, data, or profits; or
-business interruption) however caused and on any theory of liability,
-whether in contract, strict liability, or tort (including negligence
-or otherwise) arising in any way out of the use of this software, even
-if advised of the possibility of such damage.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1993 by Digital Equipment Corporation.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies, and that
-the name of Digital Equipment Corporation not be used in advertising or
-publicity pertaining to distribution of the document or software without
-specific, written prior permission.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
-WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
-OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT
-CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
-DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
-PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
-ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright 2000 Aaron D. Gifford.  All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. Neither the name of the copyright holder nor the names of contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
- 
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) AND CONTRIBUTOR(S) ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR(S) OR CONTRIBUTOR(S) BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1998 Doug Rabson.
-Copyright (c) 2001 Jake Burkholder.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. Neither the name of the project nor the names of its contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1999-2000 by Nortel Networks Corporation
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND NORTEL NETWORKS DISCLAIMS
-ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
-OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL NORTEL NETWORKS
-BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
-OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 2000-2002 Japan Network Information Center.  All rights reserved.
- 
-By using this file, you agree to the terms and conditions set forth bellow.
-
-                        LICENSE TERMS AND CONDITIONS 
-
-The following License Terms and Conditions apply, unless a different
-license is obtained from Japan Network Information Center ("JPNIC"),
-a Japanese association, Kokusai-Kougyou-Kanda Bldg 6F, 2-3-4 Uchi-Kanda,
-Chiyoda-ku, Tokyo 101-0047, Japan.
-
-1. Use, Modification and Redistribution (including distribution of any
-   modified or derived work) in source and/or binary forms is permitted
-   under this License Terms and Conditions.
-
-2. Redistribution of source code must retain the copyright notices as they
-   appear in each source code file, this License Terms and Conditions.
-
-3. Redistribution in binary form must reproduce the Copyright Notice,
-   this License Terms and Conditions, in the documentation and/or other
-   materials provided with the distribution.  For the purposes of binary
-   distribution the "Copyright Notice" refers to the following language:
-   "Copyright (c) 2000-2002 Japan Network Information Center.  All rights
-   reserved."
-
-4. The name of JPNIC may not be used to endorse or promote products
-   derived from this Software without specific prior written approval of
-   JPNIC.
-
-5. Disclaimer/Limitation of Liability: THIS SOFTWARE IS PROVIDED BY JPNIC
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-   PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL JPNIC BE LIABLE
-   FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-   BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-   OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-   ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
- -----------------------------------------------------------------------------
-
-Copyright (C) 2004  Nominet, Ltd.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND NOMINET DISCLAIMS ALL WARRANTIES WITH
-REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-PERFORMANCE OF THIS SOFTWARE.
-
- -----------------------------------------------------------------------------
-
-Portions Copyright RSA Security Inc.
-
-License to copy and use this software is granted provided that it is
-identified as "RSA Security Inc. PKCS #11 Cryptographic Token Interface
-(Cryptoki)" in all material mentioning or referencing this software.
-
-License is also granted to make and use derivative works provided that
-such works are identified as "derived from the RSA Security Inc. PKCS #11
-Cryptographic Token Interface (Cryptoki)" in all material mentioning or
-referencing the derived work.
-
-RSA Security Inc. makes no representations concerning either the
-merchantability of this software or the suitability of this software for
-any particular purpose. It is provided "as is" without express or implied
-warranty of any kind.
-
- -----------------------------------------------------------------------------
-
-Copyright (c) 1996, David Mazieres <[email protected]>
-Copyright (c) 2008, Damien Miller <[email protected]>
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
-----------------------------------------------------------------------------
-
-Copyright (c) 2000-2001 The OpenSSL Project.  All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in
-   the documentation and/or other materials provided with the
-   distribution.
-
-3. All advertising materials mentioning features or use of this
-   software must display the following acknowledgment:
-   "This product includes software developed by the OpenSSL Project
-   for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
-
-4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
-   endorse or promote products derived from this software without
-   prior written permission. For written permission, please contact
-   [email protected].
-
-5. Products derived from this software may not be called "OpenSSL"
-   nor may "OpenSSL" appear in their names without prior written
-   permission of the OpenSSL Project.
-
-6. Redistributions of any form whatsoever must retain the following
-   acknowledgment:
-   "This product includes software developed by the OpenSSL Project
-   for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
-
-THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
-EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
-ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-OF THE POSSIBILITY OF SUCH DAMAGE.
-
@@ -17,7 +17,7 @@
 - PERFORMANCE OF THIS SOFTWARE.
 -->

-<!-- $Id: FAQ.xml,v 1.4.4.29 2009-10-06 01:33:54 tbox Exp $ -->
+<!-- $Id: FAQ.xml,v 1.4.4.29 2009/10/06 01:33:54 tbox Exp $ -->

 <article class="faq">
  <title>Frequently Asked Questions about BIND 9</title>
@@ -13,7 +13,7 @@
 # OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.

-# $Id: Makefile.in,v 1.43.18.8 2009-02-20 23:46:01 tbox Exp $
+# $Id: Makefile.in,v 1.43.18.8 2009/02/20 23:46:01 tbox Exp $

 srcdir =	@srcdir@
 VPATH =		@srcdir@
@@ -42,19 +42,15 @@ BIND 9
 		Stichting NLnet - NLnet Foundation
 		Nominum, Inc.

-BIND 9.4-ESV-R5 (Extended Support Version)
-
-	BIND 9.4-ESV-R5 is expected to be the last release in the 9.4
-	series.
-
 BIND 9.4-ESV (Extended Support Version)

 	BIND 9.4-ESV is the Extended Support Version of BIND 9.4
 	and incorporates the final maintenance release fixing bugs
 	in BIND 9.4.3.

-	BIND 9.4-ESV will be supported until May 31, 2011, at which
-	time you will need to upgrade to the current release of BIND.
+	BIND 9.4-ESV will be supported until December 31, 2010, at
+	which time you will need to upgrade to the current release
+	of BIND.

 BIND 9.4.3

@@ -109,4 +109,4 @@ about idnkit and this patch.
 Bug reports and comments on this kit should be sent to
 [email protected] and [email protected], respectively.

-; $Id: README.idnkit,v 1.2.2.3 2009-01-19 00:36:25 marka Exp $
+; $Id: README.idnkit,v 1.2.2.3 2009/01/19 00:36:25 marka Exp $
@@ -1,203 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-<!--
- - Copyright (C) 2010, 2011  Internet Systems Consortium, Inc. ("ISC")
- -
- - Permission to use, copy, modify, and/or distribute this software for any
- - purpose with or without fee is hereby granted, provided that the above
- - copyright notice and this permission notice appear in all copies.
- -
- - THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
- - REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- - AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
- - INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- - LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- - PERFORMANCE OF THIS SOFTWARE.
-->
-
-<!-- $Id: RELEASE-NOTES-BIND-9.4-ESV.html,v 1.1.2.12 2011-07-24 08:05:11 tbox Exp $ -->
-
-<html xmlns="http://www.w3.org/1999/xhtml"><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /><title></title><link rel="stylesheet" href="release-notes.css" type="text/css" /><meta name="generator" content="DocBook XSL Stylesheets V1.71.1" /></head><body><div class="article" lang="en" xml:lang="en"><div class="titlepage"><hr /></div>
-
-  <div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3359578"></a>Introduction</h2></div></div></div>
-    
-    <p>
-			BIND 9.4-ESV-R5 is the current production release
-			of BIND 9.4.
-		</p>
-    <p>
-			This document summarizes changes from BIND 9.4-ESV-R4 to BIND 9.4-ESV-R5.
-			Please see the CHANGES file in the source code release for a
-			complete list of all changes.
-		</p>
-  </div>
-
-  <div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3358597"></a>Download</h2></div></div></div>
-    
-    <p>
-			The latest release of BIND 9 software can always be found
-	 		on our web site at
-      <a href="http://www.isc.org/downloads/all" target="_top">http://www.isc.org/downloads/all</a>.
-  		There you will find additional information about each release,
- 			source code, and some pre-compiled versions for certain operating
- 			systems.
-		</p>
-  </div>
-
-  <div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3358630"></a>Support</h2></div></div></div>
-    
-    <p>Product support information is available on
-      <a href="http://www.isc.org/services/support" target="_top">http://www.isc.org/services/support</a>
-      for paid support options.  Free support is provided by our user
- 			community via a mailing list.  Information on all public email
- 			lists is available at
-      <a href="https://lists.isc.org/mailman/listinfo" target="_top">https://lists.isc.org/mailman/listinfo</a>.
-    </p>
-  </div>
-
-  <div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3358679"></a>New Features</h2></div></div></div>
-    
-		<div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h3 class="title"><a id="id3358720"></a>9.4-ESV-R5</h3></div></div></div>
-			
-			<p>None.</p>
-		</div>
-  </div>
-
-  <div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3358748"></a>Feature Changes</h2></div></div></div>
-    
-		<div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h3 class="title"><a id="id3358768"></a>9.4-ESV-R5</h3></div></div></div>
-			
-			<p>None.</p>
-		</div>
-  </div>
-
-  <div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3358796"></a>Security Fixes</h2></div></div></div>
-    
-		<div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h3 class="title"><a id="id3358816"></a>9.4-ESV-R5</h3></div></div></div>
-			
-			<div class="itemizedlist"><ul type="disc"><li>
-A bug in NetBSD and FreeBSD kernels with SO_ACCEPTFILTER enabled allows
-for a TCP DoS attack. Until there is a kernel fix, ISC is disabling
-SO_ACCEPTFILTER support in BIND. [RT #22589]
-</li><li>
-named, set up to be a caching resolver, is vulnerable to a
-user querying a domain with very large resource record sets (RRSets)
-when trying to negatively cache the response. Due to an off-by-one
-error, caching the response could cause named to crash. [RT #24650]
-[CVE-2011-1910]
-</li><li>
-Change #2912 (see CHANGES) exposed a latent bug in the DNS message
-processing code that could allow certain UPDATE requests to crash
-named. This was fixed by disambiguating internal database representation
-vs DNS wire format data. [RT #24777] [CVE-2011-2464]
-</li></ul></div>
-		</div>
-  </div>
-
-  <div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3358855"></a>Bug Fixes</h2></div></div></div>
-    
-		<div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h3 class="title"><a id="id3358861"></a>9.4-ESV-R5</h3></div></div></div>
-			
-	    <div class="itemizedlist"><ul type="disc"><li>
-During RFC5011 processing some journal write errors were not detected.
-This could lead to managed-keys changes being committed but not 
-recorded in the journal files, causing potential inconsistencies  
-during later processing.  [RT #20256]
-<p>
-A potential NULL pointer deference in the DNS64 code could cause 
-named to terminate unexpectedly. [RT #20256]
-</p>
-<p>
-A state variable relating to DNSSEC could fail to be set during 
-some infrequently-executed code paths, allowing it to be used whilst
-in an unitialized state during cache updates, with unpredictable results.
-[RT #20256]
-</p>
-<p>
-A potential NULL pointer deference in DNSSEC signing code could 
-cause named to terminate unexpectedly  [RT #20256]
-</p>
-<p>
-Several cosmetic code changes were made to silence warnings
-generated by a static code analysis tool. [RT #20256]
-</p>
-</li><li>
-Cause named to terminate at startup or rndc reconfig
-reload to fail, if a log file specified in the
-conf file isn't a plain file. (RT #22771]
-</li><li>
-Prior to this fix, when named was was writing a zone to disk (as slave,
-when resigning, etc.), it might not correctly preserve the case of domain
-name labels within RDATA, if the RDATA was not compressible. The result
-is that when reloading the zone from disk would, named could serve data
-that did not match the RRSIG for that data, due to case mismatch. named
-now correctly preserves case. After upgrading to fixed code, the operator
-should either resign the data (on the master) or delete the disk file
-on the slave and reload the zone. [RT #22863]
-</li><li>
-Fix the zonechecks system test to fail on error (warning in 9.6,
-fatal in 9.7) to match behaviour for 9.4. [RT #22905]
-</li><li>
-There was a bug in how the clients-per-query code worked with some
-query patterns. This could result, in rare circumstances, in having all
-the client query slots filled with queries for the same DNS label,
-essentially ignoring the max-clients-per-query setting.
-[RT #22972]
-</li><li>
-If a slave initiates a TSIG signed AXFR from the master and the master
-fails to correctly TSIG sign the final message, the slave would be left
-with the zone in an unclean state. named detected this error too late
-and named would crash with an INSIST. The order dependancy has been
-fixed. [RT #23254]
-</li><li>
-Fixed precedence order bug with NS and DNAME records if both are present.
-(Also fixed timing of autosign test in 9.7+) [RT #23035]
-</li><li>
-Changing TTL did not cause dnssec-signzone to generate new signatures.
-[RT #23330]
-</li><li>
-If named encountered a CNAME instead of a DS record when walking
-the chain of trust down from the trust anchor, it incorrectly stopped
-validating. [RT #23338]
-</li><li>
-RRSIG records could have time stamps too far in the future.
-[RT #23356]
-</li><li>
-If running on a powerpc CPU and with atomic operations enabled,
-named could lock up. Added sync instructions to the end of atomic
-operations. [RT #23469]
-</li><li>
-ixfr-from-differences {master|slave};
-failed to select the master/slave zones, resulting in on diff/journal
-file being created.
-[RT #23580]
-</li><li>
-Remove bin/tests/system/logfileconfig/ns1/named.conf and
-add setup.sh in order to resolve changing named.conf issue. [RT #23687]
-</li><li>
-The autosign tests attempted to open ports within reserved ranges. Test
-now avoids those ports.
-[RT #23957]
-</li><li>
-Named could fail to validate zones list in a DLV that validated insecure
-without using DLV and had DS records in the parent zone. [RT #24631]
-</li><li>
-A bug in FreeBSD kernels causes IPv6 UDP responses greater than
-1280 bytes to not fragment as they should. Until there is a kernel
-fix, named will work around this by setting IPV6_USE_MIN_MTU on a
-per packet basis. [RT #24950]
-</li></ul></div>
-		</div>
-  </div>
-
-  <div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3359002"></a>Thank You</h2></div></div></div>
-    
-    <p>
-      Thank you to everyone who assisted us in making this release possible.
-      If you would like to contribute to ISC to assist us in continuing to make
-      quality open source software, please visit our donations page at
-      <a href="http://www.isc.org/supportisc" target="_top">http://www.isc.org/supportisc</a>.
-    </p>
-  </div>
-</div></body></html>
@@ -1,129 +0,0 @@
-     __________________________________________________________________
-
-Introduction
-
-   BIND 9.4-ESV-R5 is the current production release of BIND 9.4.
-
-   This document summarizes changes from BIND 9.4-ESV-R4 to BIND
-   9.4-ESV-R5. Please see the CHANGES file in the source code release for
-   a complete list of all changes.
-
-Download
-
-   The latest release of BIND 9 software can always be found on our web
-   site at http://www.isc.org/downloads/all. There you will find
-   additional information about each release, source code, and some
-   pre-compiled versions for certain operating systems.
-
-Support
-
-   Product support information is available on
-   http://www.isc.org/services/support for paid support options. Free
-   support is provided by our user community via a mailing list.
-   Information on all public email lists is available at
-   https://lists.isc.org/mailman/listinfo.
-
-New Features
-
-9.4-ESV-R5
-
-   None.
-
-Feature Changes
-
-9.4-ESV-R5
-
-   None.
-
-Security Fixes
-
-9.4-ESV-R5
-
-     * A bug in NetBSD and FreeBSD kernels with SO_ACCEPTFILTER enabled
-       allows for a TCP DoS attack. Until there is a kernel fix, ISC is
-       disabling SO_ACCEPTFILTER support in BIND. [RT #22589]
-     * named, set up to be a caching resolver, is vulnerable to a user
-       querying a domain with very large resource record sets (RRSets)
-       when trying to negatively cache the response. Due to an off-by-one
-       error, caching the response could cause named to crash. [RT #24650]
-       [CVE-2011-1910]
-     * Change #2912 (see CHANGES) exposed a latent bug in the DNS message
-       processing code that could allow certain UPDATE requests to crash
-       named. This was fixed by disambiguating internal database
-       representation vs DNS wire format data. [RT #24777] [CVE-2011-2464]
-
-Bug Fixes
-
-9.4-ESV-R5
-
-     * During RFC5011 processing some journal write errors were not
-       detected. This could lead to managed-keys changes being committed
-       but not recorded in the journal files, causing potential
-       inconsistencies during later processing. [RT #20256]
-       A potential NULL pointer deference in the DNS64 code could cause
-       named to terminate unexpectedly. [RT #20256]
-       A state variable relating to DNSSEC could fail to be set during
-       some infrequently-executed code paths, allowing it to be used
-       whilst in an unitialized state during cache updates, with
-       unpredictable results. [RT #20256]
-       A potential NULL pointer deference in DNSSEC signing code could
-       cause named to terminate unexpectedly [RT #20256]
-       Several cosmetic code changes were made to silence warnings
-       generated by a static code analysis tool. [RT #20256]
-     * Cause named to terminate at startup or rndc reconfig reload to
-       fail, if a log file specified in the conf file isn't a plain file.
-       (RT #22771]
-     * Prior to this fix, when named was was writing a zone to disk (as
-       slave, when resigning, etc.), it might not correctly preserve the
-       case of domain name labels within RDATA, if the RDATA was not
-       compressible. The result is that when reloading the zone from disk
-       would, named could serve data that did not match the RRSIG for that
-       data, due to case mismatch. named now correctly preserves case.
-       After upgrading to fixed code, the operator should either resign
-       the data (on the master) or delete the disk file on the slave and
-       reload the zone. [RT #22863]
-     * Fix the zonechecks system test to fail on error (warning in 9.6,
-       fatal in 9.7) to match behaviour for 9.4. [RT #22905]
-     * There was a bug in how the clients-per-query code worked with some
-       query patterns. This could result, in rare circumstances, in having
-       all the client query slots filled with queries for the same DNS
-       label, essentially ignoring the max-clients-per-query setting. [RT
-       #22972]
-     * If a slave initiates a TSIG signed AXFR from the master and the
-       master fails to correctly TSIG sign the final message, the slave
-       would be left with the zone in an unclean state. named detected
-       this error too late and named would crash with an INSIST. The order
-       dependancy has been fixed. [RT #23254]
-     * Fixed precedence order bug with NS and DNAME records if both are
-       present. (Also fixed timing of autosign test in 9.7+) [RT #23035]
-     * Changing TTL did not cause dnssec-signzone to generate new
-       signatures. [RT #23330]
-     * If named encountered a CNAME instead of a DS record when walking
-       the chain of trust down from the trust anchor, it incorrectly
-       stopped validating. [RT #23338]
-     * RRSIG records could have time stamps too far in the future. [RT
-       #23356]
-     * If running on a powerpc CPU and with atomic operations enabled,
-       named could lock up. Added sync instructions to the end of atomic
-       operations. [RT #23469]
-     * ixfr-from-differences {master|slave}; failed to select the
-       master/slave zones, resulting in on diff/journal file being
-       created. [RT #23580]
-     * Remove bin/tests/system/logfileconfig/ns1/named.conf and add
-       setup.sh in order to resolve changing named.conf issue. [RT #23687]
-     * The autosign tests attempted to open ports within reserved ranges.
-       Test now avoids those ports. [RT #23957]
-     * Named could fail to validate zones list in a DLV that validated
-       insecure without using DLV and had DS records in the parent zone.
-       [RT #24631]
-     * A bug in FreeBSD kernels causes IPv6 UDP responses greater than
-       1280 bytes to not fragment as they should. Until there is a kernel
-       fix, named will work around this by setting IPV6_USE_MIN_MTU on a
-       per packet basis. [RT #24950]
-
-Thank You
-
-   Thank you to everyone who assisted us in making this release possible.
-   If you would like to contribute to ISC to assist us in continuing to
-   make quality open source software, please visit our donations page at
-   http://www.isc.org/supportisc.
@@ -15,7 +15,7 @@
 * PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: acconfig.h,v 1.44.18.7 2008-12-01 23:45:56 tbox Exp $ */
+/* $Id: acconfig.h,v 1.44.18.7 2008/12/01 23:45:56 tbox Exp $ */

 /*! \file */

@@ -13,7 +13,7 @@
 # OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.

-# $Id: Makefile.in,v 1.23 2004-03-05 04:57:10 marka Exp $
+# $Id: Makefile.in,v 1.23 2004/03/05 04:57:10 marka Exp $

 srcdir =	@srcdir@
 VPATH =		@srcdir@
@@ -13,7 +13,7 @@
 # OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.

-# $Id: Makefile.in,v 1.24.18.6 2006-06-09 00:54:08 marka Exp $
+# $Id: Makefile.in,v 1.24.18.6 2006/06/09 00:54:08 marka Exp $

 srcdir =	@srcdir@
 VPATH =		@srcdir@
@@ -15,7 +15,7 @@
 * PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: check-tool.c,v 1.10.18.23 2009-09-24 21:38:50 jinmei Exp $ */
+/* $Id: check-tool.c,v 1.10.18.23 2009/09/24 21:38:50 jinmei Exp $ */

 /*! \file */

@@ -15,7 +15,7 @@
 * PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: check-tool.h,v 1.7.18.4 2005-06-20 01:19:25 marka Exp $ */
+/* $Id: check-tool.h,v 1.7.18.4 2005/06/20 01:19:25 marka Exp $ */

 #ifndef CHECK_TOOL_H
 #define CHECK_TOOL_H
@@ -13,7 +13,7 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
-.\" $Id: named-checkconf.8,v 1.16.18.14 2009-07-11 01:31:43 tbox Exp $
+.\" $Id: named-checkconf.8,v 1.16.18.14 2009/07/11 01:31:43 tbox Exp $
 .\"
 .hy 0
 .ad l
@@ -15,7 +15,7 @@
 * PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: named-checkconf.c,v 1.28.18.18 2009-02-16 23:46:03 tbox Exp $ */
+/* $Id: named-checkconf.c,v 1.28.18.18 2009/02/16 23:46:03 tbox Exp $ */

 /*! \file */

@@ -18,7 +18,7 @@
 - PERFORMANCE OF THIS SOFTWARE.
 -->

-<!-- $Id: named-checkconf.docbook,v 1.8.18.10 2007-08-28 07:19:55 tbox Exp $ -->
+<!-- $Id: named-checkconf.docbook,v 1.8.18.10 2007/08/28 07:19:55 tbox Exp $ -->
 <refentry id="man.named-checkconf">
  <refentryinfo>
    <date>June 14, 2000</date>
@@ -14,7 +14,7 @@
 - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 - PERFORMANCE OF THIS SOFTWARE.
 -->
-<!-- $Id: named-checkconf.html,v 1.9.18.21 2009-07-11 01:31:43 tbox Exp $ -->
+<!-- $Id: named-checkconf.html,v 1.9.18.21 2009/07/11 01:31:43 tbox Exp $ -->
 <html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
@@ -13,7 +13,7 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
-.\" $Id: named-checkzone.8,v 1.18.18.25 2009-07-11 01:31:43 tbox Exp $
+.\" $Id: named-checkzone.8,v 1.18.18.25 2009/07/11 01:31:43 tbox Exp $
 .\"
 .hy 0
 .ad l
@@ -15,7 +15,7 @@
 * PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: named-checkzone.c,v 1.29.18.24 2009-05-29 02:19:20 marka Exp $ */
+/* $Id: named-checkzone.c,v 1.29.18.24 2009/05/29 02:19:20 marka Exp $ */

 /*! \file */

@@ -18,7 +18,7 @@
 - PERFORMANCE OF THIS SOFTWARE.
 -->

-<!-- $Id: named-checkzone.docbook,v 1.11.18.23 2009-01-22 23:45:59 tbox Exp $ -->
+<!-- $Id: named-checkzone.docbook,v 1.11.18.23 2009/01/22 23:45:59 tbox Exp $ -->
 <refentry id="man.named-checkzone">
  <refentryinfo>
    <date>June 13, 2000</date>
@@ -14,7 +14,7 @@
 - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 - PERFORMANCE OF THIS SOFTWARE.
 -->
-<!-- $Id: named-checkzone.html,v 1.11.18.32 2009-07-11 01:31:43 tbox Exp $ -->
+<!-- $Id: named-checkzone.html,v 1.11.18.32 2009/07/11 01:31:43 tbox Exp $ -->
 <html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
@@ -13,7 +13,7 @@
 # OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.

-# $Id: Makefile.in,v 1.33.18.6 2005-09-09 14:11:04 marka Exp $
+# $Id: Makefile.in,v 1.33.18.6 2005/09/09 14:11:04 marka Exp $

 srcdir =	@srcdir@
 VPATH =		@srcdir@
@@ -13,7 +13,7 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
-.\" $Id: dig.1,v 1.23.18.27 2009-07-11 01:31:43 tbox Exp $
+.\" $Id: dig.1,v 1.23.18.27 2009/07/11 01:31:43 tbox Exp $
 .\"
 .hy 0
 .ad l
@@ -15,7 +15,7 @@
 * PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: dig.c,v 1.186.18.37 2009-05-06 10:21:00 fdupont Exp $ */
+/* $Id: dig.c,v 1.186.18.37 2009/05/06 10:21:00 fdupont Exp $ */

 /*! \file */

@@ -18,7 +18,7 @@
 - PERFORMANCE OF THIS SOFTWARE.
 -->

-<!-- $Id: dig.docbook,v 1.17.18.27 2009-02-02 04:45:22 marka Exp $ -->
+<!-- $Id: dig.docbook,v 1.17.18.27 2009/02/02 04:45:22 marka Exp $ -->
 <refentry id="man.dig">

  <refentryinfo>
@@ -14,7 +14,7 @@
 - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 - PERFORMANCE OF THIS SOFTWARE.
 -->
-<!-- $Id: dig.html,v 1.13.18.33 2009-07-11 01:31:44 tbox Exp $ -->
+<!-- $Id: dig.html,v 1.13.18.33 2009/07/11 01:31:44 tbox Exp $ -->
 <html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
@@ -15,7 +15,7 @@
 * PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: dighost.c,v 1.259.18.58 2009-06-24 03:44:52 marka Exp $ */
+/* $Id: dighost.c,v 1.259.18.58 2009/06/24 03:44:52 marka Exp $ */

 /*! \file
 *  \note
@@ -13,7 +13,7 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
-.\" $Id: host.1,v 1.14.18.18 2009-07-11 01:31:44 tbox Exp $
+.\" $Id: host.1,v 1.14.18.18 2009/07/11 01:31:44 tbox Exp $
 .\"
 .hy 0
 .ad l
@@ -15,7 +15,7 @@
 * PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: host.c,v 1.94.18.22 2009-09-08 23:29:03 marka Exp $ */
+/* $Id: host.c,v 1.94.18.22 2009/09/08 23:29:03 marka Exp $ */

 /*! \file */

@@ -18,7 +18,7 @@
 - PERFORMANCE OF THIS SOFTWARE.
 -->

-<!-- $Id: host.docbook,v 1.5.18.15 2009-01-22 23:46:00 tbox Exp $ -->
+<!-- $Id: host.docbook,v 1.5.18.15 2009/01/22 23:46:00 tbox Exp $ -->
 <refentry id="man.host">

  <refentryinfo>
@@ -14,7 +14,7 @@
 - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 - PERFORMANCE OF THIS SOFTWARE.
 -->
-<!-- $Id: host.html,v 1.7.18.24 2009-07-11 01:31:44 tbox Exp $ -->
+<!-- $Id: host.html,v 1.7.18.24 2009/07/11 01:31:44 tbox Exp $ -->
 <html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
@@ -15,7 +15,7 @@
 * PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: dig.h,v 1.82.18.25 2008-12-16 23:46:02 tbox Exp $ */
+/* $Id: dig.h,v 1.82.18.25 2008/12/16 23:46:02 tbox Exp $ */

 #ifndef DIG_H
 #define DIG_H
@@ -12,7 +12,7 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
-.\" $Id: nslookup.1,v 1.1.10.15 2009-07-11 01:31:44 tbox Exp $
+.\" $Id: nslookup.1,v 1.1.10.15 2009/07/11 01:31:44 tbox Exp $
 .\"
 .hy 0
 .ad l
@@ -15,7 +15,7 @@
 * PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: nslookup.c,v 1.101.18.20 2009-05-06 23:45:59 tbox Exp $ */
+/* $Id: nslookup.c,v 1.101.18.20 2009/05/06 23:45:59 tbox Exp $ */

 #include <config.h>

@@ -17,7 +17,7 @@
 - PERFORMANCE OF THIS SOFTWARE.
 -->

-<!-- $Id: nslookup.docbook,v 1.4.2.13 2007-08-28 07:19:55 tbox Exp $ -->
+<!-- $Id: nslookup.docbook,v 1.4.2.13 2007/08/28 07:19:55 tbox Exp $ -->
 <!--
 - Copyright (c) 1985, 1989
 -    The Regents of the University of California.  All rights reserved.
@@ -13,7 +13,7 @@
 - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 - PERFORMANCE OF THIS SOFTWARE.
 -->
-<!-- $Id: nslookup.html,v 1.1.10.22 2009-07-11 01:31:44 tbox Exp $ -->
+<!-- $Id: nslookup.html,v 1.1.10.22 2009/07/11 01:31:44 tbox Exp $ -->
 <html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
@@ -13,7 +13,7 @@
 # OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.

-# $Id: Makefile.in,v 1.26.18.4 2005-05-02 00:26:11 marka Exp $
+# $Id: Makefile.in,v 1.26.18.4 2005/05/02 00:26:11 marka Exp $

 srcdir =	@srcdir@
 VPATH =		@srcdir@
@@ -13,7 +13,7 @@
 .\" OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 .\" PERFORMANCE OF THIS SOFTWARE.
 .\"
-.\" $Id: dnssec-keygen.8,v 1.23.18.17 2009-07-11 01:31:44 tbox Exp $
+.\" $Id: dnssec-keygen.8,v 1.23.18.17 2009/07/11 01:31:44 tbox Exp $
 .\"
 .hy 0
 .ad l
@@ -16,7 +16,7 @@
 * IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

-/* $Id: dnssec-keygen.c,v 1.66.18.10 2007-08-28 07:19:55 tbox Exp $ */
+/* $Id: dnssec-keygen.c,v 1.66.18.10 2007/08/28 07:19:55 tbox Exp $ */

 /*! \file */

@@ -18,7 +18,7 @@
 - PERFORMANCE OF THIS SOFTWARE.
 -->

-<!-- $Id: dnssec-keygen.docbook,v 1.7.18.13 2008-10-15 23:46:06 tbox Exp $ -->
+<!-- $Id: dnssec-keygen.docbook,v 1.7.18.13 2008/10/15 23:46:06 tbox Exp $ -->
 <refentry id="man.dnssec-keygen">
  <refentryinfo>
    <date>June 30, 2000</date>
@@ -14,7 +14,7 @@
 - OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 - PERFORMANCE OF THIS SOFTWARE.
 -->
-<!-- $Id: dnssec-keygen.html,v 1.9.18.23 2009-07-11 01:31:44 tbox Exp $ -->
+<!-- $Id: dnssec-keygen.html,v 1.9.18.23 2009/07/11 01:31:44 tbox Exp $ -->
 <html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
Author	SHA1	Message	Date
Ken Smith	1c808b47a2	Ready for the 7.3-RELEASE builds to begin. Approved by: re (implicit)	2010-03-21 01:03:49 +00:00
Ken Smith	ec323c5251	Merge r205400: > Guess at the date the 7.3-RELEASE builds will be finished and everything > will be in place for the announcement. Approved by: re (implicit)	2010-03-21 00:05:29 +00:00
Hiroki Sato	520cccc1a9	Update release notes: merge two SysV IPC entries into one, rtld(1) entries revised: - dynamic string token subst - PIE support improvement - ELF object mapping change Suggested by: kib Approved by: re (implicitly)	2010-03-20 16:39:28 +00:00
Hiroki Sato	4ab7e1440e	Remove an entry of "superpages enabled by default on amd64" because it has been reverted on releng/7.3. Spotted by: ivoras Approved by: re (implicitly)	2010-03-20 14:57:24 +00:00
Hiroki Sato	a85ae14254	Update release notes: URL of Errata doc added[1], s/release candidate/release/[1], grammatical fixes[1], description on pc98 boot2 fixed[2], description on gstripe(8) improved[2], description on vfs.flushbufqtarget improved[2], and description on tzcode2009k improved[3]. Submitted by: dhw[1], ivoras[2], and edwin[3] Approved by: re (implicitly)	2010-03-20 14:36:39 +00:00
Hiroki Sato	192a58e309	Bump copyright year and trim old entries. Approved by: re (implicitly)	2010-03-19 18:43:15 +00:00
Hiroki Sato	3dc91d0a7d	Remove obsolete translations. Approved by: re (implicitly)	2010-03-19 18:35:23 +00:00
Hiroki Sato	5ab2afd87d	Update relnotes (final round, hopefully): SA-09:09,10,11,12,14,15,16,17,10:01,02,03, security.jail.ip[46]_saddrsel, acpidump(8) SRAT support (acpi(4) entry removed)[1], sched_ule(4) deadlock fixed (EN-10:02), superpages enabled by default on amd64 (superpages entry revised)[1], security.bsd.map_at_zero, boot2 on pc98 reimplemented, vgapci(4) MSI/MSI-X proxying (item of the old pci(4) item removed)[1], bce(4) bugfix, cxgb(4) firmware 7.8.0[2], fxp(4) + TSO = poor performance fixed, mxge(4) firmware 1.4.48b, ste(4) improvements, vlan(4) now in GENERIC, gstripe(8) default stripe size is now 64KB, fetch(1) HTTP digest auth support, fetch(1) NO_PROXY/no_proxy support, getpagesize(3) added, mergemaster(8) DELETE_STALE_RC_FILES support, tftp(1) exit status fixed, traceroute(8) address selection in jail, whois(1) -d removed, $vlans_IF in rc.conf added, ISC BIND 9.4-ESV, tzdata2010b, GNOME 2.28.2, and KDE 4.3.5. Spotted by: jhb[1] and np[2] Approved by: re (implicitly)	2010-03-19 18:33:40 +00:00
Hiroki Sato	1282b3c592	Update relnotes for 7.3R (second round): acpi(4) SRAT parsing support, closefrom(2) added, utimes(2) vfs.timestamp_precision support, kmem_map increased to 512GB on amd64, lindev(4) added, linux(4) improvements, PECOFF support removed, P1003_1B_SEMAPHORES is now default, >2GB shared mem segment for SYSV IPC, sglist(9) added, SYSV IPC API changed with backward compatibility, superpages, zfsboot 64-bit LBA, fd shortage fix, /boot.config fix, zfsloader added, boot loader GPT issue fixed, amdsbwd(4) added, cpuctl(4) CPUCTL_MSR[CS]BIT support, cpufreq(4) Phenon support, ipmi(4) bugfix, hw.mca.enabled added, hw.pagesizes added, VIA Nano processor support, DRM RS880, RV740, R6/7xx 3D, Intel G41 support, alc(4) added, bge(4) improvements, cas(4) added, et(4) checksum offloading support, msk(4) improvements, mxge(4) improvements, vge(4) improvements, xl(4) bugfix, gif(4)+if_bridge(4) EtherIP bugfix, IPcomp net.inet.ipcomp.ipcomp_enable change, ng_iface(4) bugfix, tap(4) TAPGIFNAME ioctl added, aac(4) upgraded, ahc(4) Adaptec 39320LPE support, ata(4) timeout increased and some bugfixes, gmirror balancing algorithm change, gpart(8) bugfix, hptrr(4) hw.hptrr.attach_generic added, mfi(4) LSI MegaRAID SAS 1078 and Dell PERC6 support, ext2fs(5) improvements, pseudofs(9) MPSAFE, UFS_DIRHASH improvements, apropos(1) change, cp(1) symlink handling bugfix, cpucontrol(8) atomic AND/OR for MSR, crontab(5) no longer has HOME= line, df(1) -h/-H supports inode counts, dhclient(8) uses 68 as the source port for unicast DHCPREQUEST, symlink handling bugfix in find(1) and rm(1), gzip(1) pack'd file support, libradius(3) RADIUS server support, lp(1) -m/-t added, lpq(1) EoL char handling fixed, mfiutil(8) added, mptutil(8) added, ntpd(8) IPv6 anycast addr bind issue fixed, ppp(8) race fixed, pwait(1) added, strptime(3) %z added, sysintall(8) now uses 400MB for EFI partition on IA64, tail(1) -F never returns with ENOENT, traceroute{,6}(8) AS num lookup, tzsetup(8) -s added, yp(8) shadow.* map added, service(8) added, $create_args_IF added to rc.conf, $fsck_y_flags added, rc.d/named improvements, crashinfo(8) support in rc.d/savecore, rc.d/static_arp added, ISC BIND 9.4.3-P4, tzdata2009u, tzcode2009k, unifdef 1.188, and release ISO image filenames changed to "FreeBSD-*". Approved by: re (implicitly)	2010-03-19 09:20:06 +00:00
Hiroki Sato	0c1c8b75ed	Update relnotes for 7.3R (first round): ddb(8) pager support for show_geom, deadlock involving malloc(3) and fork(2) fixed, gptzfsboot added, zfsboot # of fd increased, hwpmc added, s/k8temp/amdtemp/, pci(4) improvement, bge(4) panic on shutdown fixed, cxgb upgraded, fxp(4)+TSO IP length issue fixed, nfe(4) improved, nge(4) improved, net.inet.ip.fw.default_to_accept added, NFS client negative pathname lookup cache added, vfs.flushbufqtarget added, Bluetooth(3) HCI API support, btpand(8) -d device name support, chflags(1) -h bugfix, cpuset -x option, dhclient NUL-terminated text bugfix, fdisk(8) size qualifiers support, fetch(1) _TIMEOUT and HTTPS parameters bugfix, find(1) -L + -delete bugfix, ktrace(1) new record for sysctl, fdopendir(3) added, feature_present(3) added, man(1) UTF-8 support, mergemaster now passes -L to mtree(8), newfs_msdos(8) non-CHS media support, pkill now ignores itself and ancestors, -a option added, ps -p option added, pwd_mkdb -C now checks MAXLOGNAME, rtld(1) LD_ELF_HINTS_PATH support, sysinstall(8) comma-separated list of interfaces in netDev, tzdata2009i, sendmail 8.14.4, and pkg_info(1) segfault fix. Approved by: re (implicitly)	2010-03-18 07:28:02 +00:00
Ken Smith	08add50b93	Back out r203073 due to issues recently discovered with machine check hardware on some AMD processors that causes problems with running FreeBSD as a guest on some virtual machine monitors. What is believed to be the correct fix has been committed but should receive more testing before it becomes part of a release. Submitted by: alc Approved by: re (kib)	2010-03-10 19:55:27 +00:00
Ken Smith	468632bd00	Merge r204967: Package set for 7.3-RELEASE. Reviewed by: portmgr@, re@ Approved by: re (implicit)	2010-03-10 19:18:19 +00:00
Hiroki Sato	338628efb1	- Bump &release.*; for the upcoming 7.3R. - Bump copyright year. Approved by: re (implicitly)	2010-03-04 15:54:06 +00:00
Ken Smith	e550a97c18	Ready for 7.3-RC2. Approved by: re (implicit)	2010-03-01 04:46:07 +00:00
John Baldwin	d4a0383caa	MFC 204090: Fix mptutil's method for locating disk devices attached to a specific mpt(4) controller. Previously, the code assumed that multiple match patterns provided to an XPT_DEV_MATCH request were ANDed together. Instead, they are ORed. Instead, to match peripherals for a specific bus, one query needs to be performed to lookup the path ID of the bus. A second query can then be performed matching peripherals attached to that path. This approach also makes the code a bit cleaner as the returned match results do not mix buses and perphierals. Approved by: re (kib)	2010-02-24 21:29:45 +00:00
Konstantin Belousov	20ef491f0b	MFC r203818: Clear the bp pointer when buffer is already brelse()d. Approved by: re (bz)	2010-02-20 12:34:14 +00:00
John Baldwin	2c957515d0	Fix a bug where MSI interrupts on x86 were always routed to APIC ID 0 rather than the APIC ID of the boot CPU prior to SI_SUB_SMP. This resulted in some storage controllers not being able to enumerate attached devices when using MSI/MSI-X interrupts. This only affects <= 7.x, so it is a direct commit to 7.3 rather than an MFC. Approved by: re (kib)	2010-02-17 21:19:10 +00:00
Konstantin Belousov	0e31d1a9d8	MFC r203441: Placate new binutils, by using 16-bit %ax instead of 32-bit %eax as an argument for fnstsw. Explicitely specify sizes for the XMM control and status word and X87 control and status words. Approved by: re (bz)	2010-02-17 10:39:39 +00:00
Konstantin Belousov	9814250d30	MFC r203875: Do not leak process lock when current thread is not allowed to see target. Approved by: re (bz)	2010-02-17 10:21:00 +00:00
Doug Barton	a759723f3b	Merge from stable/7, version 203948: Upgrade to BIND 9.4-ESV. This version incorporates all bug and security fixes since the release of 9.4.3, including the most recent -P5 security fix detailed below. From the README: BIND 9.4-ESV will be supported until December 31, 2010, at which time you will need to upgrade to the current release of BIND. This versions address the following vulnerabilities: BIND 9 Cache Update from Additional Section https://www.isc.org/advisories/CVE-2009-4022v6 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-4022 A nameserver with DNSSEC validation enabled may incorrectly add unauthenticated records to its cache that are received during the resolution of a recursive client query BIND 9 DNSSEC validation code could cause bogus NXDOMAIN responses https://www.isc.org/advisories/CVE-2010-0097 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0097 There was an error in the DNSSEC NSEC/NSEC3 validation code that could cause bogus NXDOMAIN responses (that is, NXDOMAIN responses for records proven by NSEC or NSEC3 to exist) to be cached as if they had validated correctly These issues only affect systems with DNSSEC validation enabled. Approved by: re (kensmith)	2010-02-16 18:10:35 +00:00
Konstantin Belousov	7294ca01f6	MFC r195635: Properly set MAP_ENTRY_WIRE_SKIPPED when aborting the loop. PR: kern/143717 (for RELENG_7) Approved by: re (bz)	2010-02-13 11:24:11 +00:00
Ken Smith	7cfa6ebe39	Ready for 7.3-RC1. Approved by: re (implicit)	2010-02-10 04:10:36 +00:00
Ken Smith	710004612a	Adjust __FreeBSD_version for this being the 7.3-RELEASE release branch. Approved by: re (implicit)	2010-02-10 04:09:33 +00:00
Ken Smith	4c992a1695	Update branch tag. Approved by: re (implicit)	2010-02-10 04:06:29 +00:00
Ken Smith	368fcebf4d	Update branch tag for 'make update'. Approved by: re (implicit)	2010-02-10 04:01:45 +00:00