Ready to do the tagging for 4.11-RELEASE.

Approved by: re (implicit)
Remove unnecessary parts for the release.
2026-10-31 04:45:39 +01:00 · 2005-01-21 13:12:41 +00:00 · 2005-01-21 11:20:40 +00:00 · 2005-01-21 11:16:10 +00:00 · 2005-01-21 06:46:33 +00:00 · 2005-01-21 06:43:18 +00:00
733 changed files with 41479 additions and 125723 deletions
@@ -4,7 +4,7 @@
 The compilation of software known as FreeBSD is distributed under the
 following terms:

-Copyright (C) 1992-2007 The FreeBSD Project. All rights reserved.
+Copyright (C) 1992-2005 The FreeBSD Project. All rights reserved.

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions
@@ -554,7 +554,7 @@ update:
 	@echo "--------------------------------------------------------------"
 	@echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 	@echo "--------------------------------------------------------------"
-	cd ${.CURDIR}; cvs -R -q update -rRELENG_4 -P -d
+	cd ${.CURDIR}; cvs -R -q update -rRELENG_4_11 -P -d
 .endif

 #
@@ -8,22 +8,6 @@ A reverse chronology since 4.0 was released is included, followed by
 the common items quick how-tos, followed by entries for versions of
 -current prior to 4.0 Release.

-20070426:
-        The ABI breakage in sendmail(8)'s libmilter has been repaired
-        so it is no longer necessary to recompile mail filters (aka,
-        milters).  If you recompiled mail filters after the 20070411
-        note, it is not necessary to recompile them again.
-
-20070411:
-	sendmail(8) has been updated to version 8.14.1.  Mail filters
-	(aka, milters) compiled against the libmilter included in the
-	base operating system should be recompiled.
-
-20050513:
-	Intel Hyper-Threading is now disabled by default due to a
-	security issue, but can be re-enabled by setting the
-	machdep.hyperthreading_allowed tunable in /boot/loader.conf.
-
 20050124:
 	FreeBSD 4.11-RELEASE.

@@ -870,7 +854,7 @@ versions of -stable/-current.
 	Changes to the pccardd kernel interface require that you recompile
 	pccardd for new kernel.

-19990725:
+19980725:
 	The ipfw interface to the kernel has changed.  You will need to
 	recompile ipfw programs for the new kernel.

@@ -130,8 +130,6 @@
 /* we want to use the system malloc when we install as /bin/csh */
 #define SYSMALLOC
 #define BSD_STYLE_COLORLS
-/* Use LC_MESSAGES locale category to open the message catalog */
-#define MCLoadBySet NL_CAT_LOCALE
 #endif

 #if defined(__bsdi__)
@@ -112,7 +112,7 @@ unit_t unitp [] = { NONE, KILO, MEGA, GIGA, TERA, PETA };
 int	  bread(off_t, void *, int);
 int	  checkvfsname(const char *, char **);
 char	 *getmntpt(char *);
-int	  int64width(int64_t);
+int	  longwidth(long);
 char	 *makenetvfslist(void);
 char	**makevfslist(char *);
 void	  prthuman(struct statfs *, long);
@@ -376,15 +376,9 @@ prthumanval(double bytes)
 * Convert statfs returned filesystem size into BLOCKSIZE units.
 * Attempts to avoid overflow for large filesystems.
 */
-static int64_t
-fsbtoblk(int64_t num, uint64_t fsbs, u_long bs)
-{
-
-	if (fsbs != 0 && fsbs < bs)
-		return (num / (int64_t)(bs / fsbs));
-	else
-		return (num * (int64_t)(fsbs / bs));
-}
+#define fsbtoblk(num, fsbs, bs) \
+	(((fsbs) != 0 && (fsbs) < (bs)) ? \
+		(num) / ((bs) / (fsbs)) : (num) * ((fsbs) / (bs)))

 /*
 * Print out status about a filesystem.
@@ -426,12 +420,11 @@ prtstat(struct statfs *sfsp, struct maxwidths *mwp)
 	if (hflag) {
 		prthuman(sfsp, used);
 	} else {
-		(void)printf(" %*lld %*lld %*lld", mwp->total,
-	            (long long)fsbtoblk(sfsp->f_blocks, sfsp->f_bsize,
-		    blocksize), mwp->used,
-		    (long long)fsbtoblk(used, sfsp->f_bsize, blocksize),
-	            mwp->avail, (long long)fsbtoblk(sfsp->f_bavail,
-	            sfsp->f_bsize, blocksize));
+		(void)printf(" %*ld %*ld %*ld", mwp->total,
+	            fsbtoblk(sfsp->f_blocks, sfsp->f_bsize, blocksize),
+		    mwp->used, fsbtoblk(used, sfsp->f_bsize, blocksize),
+	            mwp->avail, fsbtoblk(sfsp->f_bavail, sfsp->f_bsize,
+		    blocksize));
 	}
 	(void)printf(" %5.0f%%",
 	    availblks == 0 ? 100.0 : (double)used / (double)availblks * 100.0);
@@ -460,20 +453,20 @@ update_maxwidths(struct maxwidths *mwp, struct statfs *sfsp)
 		getbsize(&dummy, &blocksize);

 	mwp->mntfrom = imax(mwp->mntfrom, strlen(sfsp->f_mntfromname));
-	mwp->total = imax(mwp->total, int64width(fsbtoblk(sfsp->f_blocks,
+	mwp->total = imax(mwp->total, longwidth(fsbtoblk(sfsp->f_blocks,
 	    sfsp->f_bsize, blocksize)));
-	mwp->used = imax(mwp->used, int64width(fsbtoblk(sfsp->f_blocks -
+	mwp->used = imax(mwp->used, longwidth(fsbtoblk(sfsp->f_blocks -
 	    sfsp->f_bfree, sfsp->f_bsize, blocksize)));
-	mwp->avail = imax(mwp->avail, int64width(fsbtoblk(sfsp->f_bavail,
+	mwp->avail = imax(mwp->avail, longwidth(fsbtoblk(sfsp->f_bavail,
 	    sfsp->f_bsize, blocksize)));
-	mwp->iused = imax(mwp->iused, int64width(sfsp->f_files -
+	mwp->iused = imax(mwp->iused, longwidth(sfsp->f_files -
 	    sfsp->f_ffree));
-	mwp->ifree = imax(mwp->ifree, int64width(sfsp->f_ffree));
+	mwp->ifree = imax(mwp->ifree, longwidth(sfsp->f_ffree));
 }

 /* Return the width in characters of the specified long. */
 int
-int64width(int64_t val)
+longwidth(long val)
 {
 	int len;

@@ -35,7 +35,7 @@
 .\"     @(#)ls.1	8.7 (Berkeley) 7/29/94
 .\" $FreeBSD$
 .\"
-.Dd January 11, 2005
+.Dd July 8, 2002
 .Dt LS 1
 .Os
 .Sh NAME
@@ -188,9 +188,7 @@ This option overrides the environment variable
 .Dq ell . )
 List in long format.
 (See below.)
-A total sum (in blocks, see the
-.Fl s
-option for the block size unit) for all the file
+If the output is to a terminal, a total sum for all the file
 sizes is output on a line before the long listing.
 .It Fl m
 Stream output format; list files across the page, separated by commas.
@@ -218,7 +216,7 @@ lexicographical order or the oldest entries first.
 .It Fl s
 Display the number of file system blocks actually used by each file, in units
 of 512 bytes, where partial units are rounded up to the next integer value.
-A total sum for all the file
+If the output is to a terminal, a total sum for all the file
 sizes is output on a line before the listing.
 The environment variable
 .Ev BLOCKSIZE
@@ -2,6 +2,8 @@
 # $FreeBSD$

 PROG=	rm
+WARNS?=	2
+SRCS=	rm.c

 LINKS=	${BINDIR}/rm ${BINDIR}/unlink
 MLINKS=	rm.1 unlink.1
@@ -1,4 +1,3 @@
-.\"-
 .\" Copyright (c) 1990, 1993, 1994
 .\"	The Regents of the University of California.  All rights reserved.
 .\"
@@ -13,6 +12,10 @@
 .\" 2. Redistributions in binary form must reproduce the above copyright
 .\"    notice, this list of conditions and the following disclaimer in the
 .\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"	This product includes software developed by the University of
+.\"	California, Berkeley and its contributors.
 .\" 4. Neither the name of the University nor the names of its contributors
 .\"    may be used to endorse or promote products derived from this software
 .\"    without specific prior written permission.
@@ -32,7 +35,7 @@
 .\"	@(#)rm.1	8.5 (Berkeley) 12/5/94
 .\" $FreeBSD$
 .\"
-.Dd September 29, 2005
+.Dd January 28, 1999
 .Dt RM 1
 .Os
 .Sh NAME
@@ -41,8 +44,7 @@
 .Nd remove directory entries
 .Sh SYNOPSIS
 .Nm
-.Op Fl f | i
-.Op Fl dIPRrvW
+.Op Fl dfiPRrvW
 .Ar
 .Nm unlink
 .Ar file
@@ -78,20 +80,10 @@ The
 option overrides any previous
 .Fl f
 options.
-.It Fl I
-Request confirmation once if more than three files are being removed or if a
-directory is being recursively removed.
-This is a far less intrusive option than
-.Fl i
-yet provides almost the same level of protection against mistakes.
 .It Fl P
 Overwrite regular files before deleting them.
 Files are overwritten three times, first with the byte pattern 0xff,
 then 0x00, and then 0xff again, before they are deleted.
-Specifying this flag for a read only file will cause
-.Nm
-to generate an error message and exit.
-The file wil not be removed or overwritten.
 .It Fl R
 Attempt to remove the file hierarchy rooted in each file argument.
 The
@@ -123,10 +115,9 @@ The
 utility removes symbolic links, not the files referenced by the links.
 .Pp
 It is an error to attempt to remove the files
-.Pa / ,
-.Pa .\&
+.Dq .\&
 or
-.Pa .. .
+.Dq .. .
 .Pp
 When the utility is called as
 .Nm unlink ,
@@ -157,17 +148,31 @@ to parse its arguments, which allows it to accept
 the
 .Sq Li --
 option which will cause it to stop processing flag options at that
-point.
-This will allow the removal of file names that begin
+point.  This will allow the removal of file names that begin
 with a dash
 .Pq Sq - .
 For example:
 .Dl rm -- -filename
 The same behavior can be obtained by using an absolute or relative
-path reference.
-For example:
+path reference.  For example:
 .Dl rm /home/user/-filename
 .Dl rm ./-filename
+.Sh SEE ALSO
+.Xr chflags 1 ,
+.Xr rmdir 1 ,
+.Xr undelete 2 ,
+.Xr unlink 2 ,
+.Xr fts 3 ,
+.Xr getopt 3 ,
+.Xr symlink 7
+.Sh BUGS
+The
+.Fl P
+option assumes that the underlying file system is a fixed-block file
+system.
+UFS is a fixed-block file system, LFS is not.
+In addition, only regular files are overwritten, other types of files
+are not.
 .Sh COMPATIBILITY
 The
 .Nm
@@ -183,14 +188,6 @@ Also, historical
 .Bx
 implementations prompted on the standard output,
 not the standard error output.
-.Sh SEE ALSO
-.Xr chflags 1 ,
-.Xr rmdir 1 ,
-.Xr undelete 2 ,
-.Xr unlink 2 ,
-.Xr fts 3 ,
-.Xr getopt 3 ,
-.Xr symlink 7
 .Sh STANDARDS
 The
 .Nm
@@ -206,11 +203,3 @@ A
 .Nm
 command appeared in
 .At v1 .
-.Sh BUGS
-The
-.Fl P
-option assumes that the underlying file system is a fixed-block file
-system.
-UFS is a fixed-block file system, LFS is not.
-In addition, only regular files are overwritten, other types of files
-are not.
@@ -10,6 +10,10 @@
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by the University of
+ *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
@@ -27,7 +31,6 @@
 * SUCH DAMAGE.
 */

-#if 0
 #ifndef lint
 static const char copyright[] =
 "@(#) Copyright (c) 1990, 1993, 1994\n\
@@ -35,9 +38,10 @@ static const char copyright[] =
 #endif /* not lint */

 #ifndef lint
+#if 0
 static char sccsid[] = "@(#)rm.c	8.5 (Berkeley) 4/18/94";
-#endif /* not lint */
 #endif
+#endif /* not lint */
 #include <sys/cdefs.h>
 __FBSDID("$FreeBSD$");

@@ -49,8 +53,6 @@ __FBSDID("$FreeBSD$");
 #include <errno.h>
 #include <fcntl.h>
 #include <fts.h>
-#include <grp.h>
-#include <pwd.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -58,29 +60,26 @@ __FBSDID("$FreeBSD$");
 #include <unistd.h>

 int dflag, eval, fflag, iflag, Pflag, vflag, Wflag, stdin_ok;
-int rflag, Iflag;
 uid_t uid;

 int	check(char *, char *, struct stat *);
-int	check2(char **);
 void	checkdot(char **);
-void	checkslash(char **);
 void	rm_file(char **);
-int	rm_overwrite(char *, struct stat *);
+void	rm_overwrite(char *, struct stat *);
 void	rm_tree(char **);
 void	usage(void);

 /*
 * rm --
 *	This rm is different from historic rm's, but is expected to match
- *	POSIX 1003.2 behavior.	The most visible difference is that -f
+ *	POSIX 1003.2 behavior.  The most visible difference is that -f
 *	has two specific effects now, ignore non-existent files and force
- *	file removal.
+ * 	file removal.
 */
 int
 main(int argc, char *argv[])
 {
-	int ch;
+	int ch, rflag;
 	char *p;

 	/*
@@ -104,7 +103,7 @@ main(int argc, char *argv[])
 	}

 	Pflag = rflag = 0;
-	while ((ch = getopt(argc, argv, "dfiIPRrvW")) != -1)
+	while ((ch = getopt(argc, argv, "dfiPRrvW")) != -1)
 		switch(ch) {
 		case 'd':
 			dflag = 1;
@@ -117,9 +116,6 @@ main(int argc, char *argv[])
 			fflag = 0;
 			iflag = 1;
 			break;
-		case 'I':
-			Iflag = 1;
-			break;
 		case 'P':
 			Pflag = 1;
 			break;
@@ -141,22 +137,16 @@ main(int argc, char *argv[])

 	if (argc < 1) {
 		if (fflag)
-			return (0);
+			return 0;
 		usage();
 	}

 	checkdot(argv);
-	if (getenv("POSIXLY_CORRECT") == NULL)
-		checkslash(argv);
 	uid = geteuid();

 	if (*argv) {
 		stdin_ok = isatty(STDIN_FILENO);

-		if (Iflag) {
-			if (check2(argv) == 0)
-				exit (1);
-		}
 		if (rflag)
 			rm_tree(argv);
 		else
@@ -192,11 +182,8 @@ rm_tree(char **argv)
 		flags |= FTS_NOSTAT;
 	if (Wflag)
 		flags |= FTS_WHITEOUT;
-	if (!(fts = fts_open(argv, flags, NULL))) {
-		if (fflag && errno == ENOENT)
-			return;
-		err(1, "fts_open");
-	}
+	if (!(fts = fts_open(argv, flags, NULL)))
+		err(1, NULL);
 	while ((p = fts_read(fts)) != NULL) {
 		switch (p->fts_info) {
 		case FTS_DNR:
@@ -210,8 +197,8 @@ rm_tree(char **argv)
 			errx(1, "%s: %s", p->fts_path, strerror(p->fts_errno));
 		case FTS_NS:
 			/*
-			 * Assume that since fts_read() couldn't stat the
-			 * file, it can't be unlinked.
+			 * FTS_NS: assume that if can't stat the file, it
+			 * can't be unlinked.
 			 */
 			if (!needstat)
 				break;
@@ -280,18 +267,9 @@ rm_tree(char **argv)
 				}
 				break;

-			case FTS_NS:
-				/*
-				 * Assume that since fts_read() couldn't stat
-				 * the file, it can't be unlinked.
-				 */
-				if (fflag)
-					continue;
-				/* FALLTHROUGH */
 			default:
 				if (Pflag)
-					if (!rm_overwrite(p->fts_accpath, NULL))
-						continue;
+					rm_overwrite(p->fts_accpath, NULL);
 				rval = unlink(p->fts_accpath);
 				if (rval == 0 || (fflag && errno == ENOENT)) {
 					if (rval == 0 && vflag)
@@ -357,8 +335,7 @@ rm_file(char **argv)
 				rval = rmdir(f);
 			else {
 				if (Pflag)
-					if (!rm_overwrite(f, &sb))
-						continue;
+					rm_overwrite(f, &sb);
 				rval = unlink(f);
 			}
 		}
@@ -378,11 +355,11 @@ rm_file(char **argv)
 * XXX
 * This is a cheap way to *really* delete files.  Note that only regular
 * files are deleted, directories (and therefore names) will remain.
- * Also, this assumes a fixed-block file system (like FFS, or a V7 or a
- * System V file system).  In a logging file system, you'll have to have
+ * Also, this assumes a fixed-block filesystem (like FFS, or a V7 or a
+ * System V filesystem).  In a logging filesystem, you'll have to have
 * kernel support.
 */
-int
+void
 rm_overwrite(char *file, struct stat *sbp)
 {
 	struct stat sb;
@@ -398,14 +375,14 @@ rm_overwrite(char *file, struct stat *sbp)
 		sbp = &sb;
 	}
 	if (!S_ISREG(sbp->st_mode))
-		return (1);
+		return;
 	if ((fd = open(file, O_WRONLY, 0)) == -1)
 		goto err;
 	if (fstatfs(fd, &fsb) == -1)
 		goto err;
 	bsize = MAX(fsb.f_iosize, 1024);
 	if ((buf = malloc(bsize)) == NULL)
-		err(1, "%s: malloc", file);
+		err(1, "malloc");

 #define	PASS(byte) {							\
 	memset(buf, byte, bsize);					\
@@ -424,16 +401,13 @@ rm_overwrite(char *file, struct stat *sbp)
 	PASS(0xff);
 	if (!fsync(fd) && !close(fd)) {
 		free(buf);
-		return (1);
+		return;
 	}

 err:	eval = 1;
 	if (buf)
 		free(buf);
-	if (fd != -1)
-		close(fd);
 	warn("%s", file);
-	return (0);
 }


@@ -449,7 +423,7 @@ check(char *path, char *name, struct stat *sp)
 	else {
 		/*
 		 * If it's not a symbolic link and it's unwritable and we're
-		 * talking to a terminal, ask.	Symbolic links are excluded
+		 * talking to a terminal, ask.  Symbolic links are excluded
 		 * because their permissions are meaningless.  Check stdin_ok
 		 * first because we may not have stat'ed the file.
 		 */
@@ -460,16 +434,12 @@ check(char *path, char *name, struct stat *sp)
 			return (1);
 		strmode(sp->st_mode, modep);
 		if ((flagsp = fflagstostr(sp->st_flags)) == NULL)
-			err(1, "fflagstostr");
-		if (Pflag)
-			errx(1,
-			    "%s: -P was specified, but file is not writable",
-			    path);
+			err(1, NULL);
 		(void)fprintf(stderr, "override %s%s%s/%s %s%sfor %s? ",
 		    modep + 1, modep[9] == ' ' ? "" : " ",
 		    user_from_uid(sp->st_uid, 0),
 		    group_from_gid(sp->st_gid, 0),
-		    *flagsp ? flagsp : "", *flagsp ? " " : "",
+		    *flagsp ? flagsp : "", *flagsp ? " " : "", 
 		    path);
 		free(flagsp);
 	}
@@ -481,77 +451,6 @@ check(char *path, char *name, struct stat *sp)
 	return (first == 'y' || first == 'Y');
 }

-#define ISSLASH(a)	((a)[0] == '/' && (a)[1] == '\0')
-void
-checkslash(char **argv)
-{
-	char **t, **u;
-	int complained;
-
-	complained = 0;
-	for (t = argv; *t;) {
-		if (ISSLASH(*t)) {
-			if (!complained++)
-				warnx("\"/\" may not be removed");
-			eval = 1;
-			for (u = t; u[0] != NULL; ++u)
-				u[0] = u[1];
-		} else {
-			++t;
-		}
-	}
-}
-
-int
-check2(char **argv)
-{
-	struct stat st;
-	int first;
-	int ch;
-	int fcount = 0;
-	int dcount = 0;
-	int i;
-	const char *dname = NULL;
-
-	for (i = 0; argv[i]; ++i) {
-		if (lstat(argv[i], &st) == 0) {
-			if (S_ISDIR(st.st_mode)) {
-				++dcount;
-				dname = argv[i];    /* only used if 1 dir */
-			} else {
-				++fcount;
-			}
-		}
-	}
-	first = 0;
-	while (first != 'n' && first != 'N' && first != 'y' && first != 'Y') {
-		if (dcount && rflag) {
-			fprintf(stderr, "recursively remove");
-			if (dcount == 1)
-				fprintf(stderr, " %s", dname);
-			else
-				fprintf(stderr, " %d dirs", dcount);
-			if (fcount == 1)
-				fprintf(stderr, " and 1 file");
-			else if (fcount > 1)
-				fprintf(stderr, " and %d files", fcount);
-		} else if (dcount + fcount > 3) {
-			fprintf(stderr, "remove %d files", dcount + fcount);
-		} else {
-			return(1);
-		}
-		fprintf(stderr, "? ");
-		fflush(stderr);
-
-		first = ch = getchar();
-		while (ch != '\n' && ch != EOF)
-			ch = getchar();
-		if (ch == EOF)
-			break;
-	}
-	return (first == 'y' || first == 'Y');
-}
-
 #define ISDOT(a)	((a)[0] == '.' && (!(a)[1] || ((a)[1] == '.' && !(a)[2])))
 void
 checkdot(char **argv)
@@ -582,7 +481,7 @@ usage(void)
 {

 	(void)fprintf(stderr, "%s\n%s\n",
-	    "usage: rm [-f | -i] [-dIPRrvW] file ...",
+	    "usage: rm [-f | -i] [-dPRrvW] file ...",
 	    "       unlink file");
 	exit(EX_USAGE);
 }
@@ -1164,7 +1164,7 @@ expmeta(char *enddir, char *name)
 			if (*p == '\0')
 				break;
 		}
-		if (metaflag == 0 || lstat(expdir, &statb) >= 0)
+		if (metaflag == 0 || stat(expdir, &statb) >= 0)
 			addfname(expdir);
 		return;
 	}
@@ -930,8 +930,7 @@ dowait(int block, struct job *job)
 	in_dowait--;
 	if (breakwaitcmd != 0) {
 		breakwaitcmd = 0;
-		if (pid <= 0)
-			return -1;
+		return -1;
 	}
 	if (pid <= 0)
 		return pid;
@@ -969,7 +969,6 @@ readtoken1(int firstc, char const *syntax, char *eofmark, int striptabs)
 					USTPUTC('\\', out);
 					pungetc();
 				} else if (c == '\n') {
-					plinno++;
 					if (doprompt)
 						setprompt(2);
 					else
@@ -262,7 +262,7 @@ When waiting for a child, execute traps immediately.
 If this option is not set,
 traps are executed after the child exits,
 as specified in
-.St -p1003.2 .
+.St -p1003.2
 This nonstandard option is useful for putting guarding shells around
 children that block signals.  The surrounding shell may kill the child
 or it may just return control to the tty and leave the child alone,
@@ -312,7 +312,6 @@ static void    compressedStreamEOF   ( void )    NORETURN;

 static void    copyFileName ( Char*, Char* );
 static void*   myMalloc     ( Int32 );
-static int     applySavedFileAttrToOutputFile ( int fd );



@@ -458,10 +457,6 @@ void compressStream ( FILE *stream, FILE *zStream )
   ret = fflush ( zStream );
   if (ret == EOF) goto errhandler_io;
   if (zStream != stdout) {
-      int fd = fileno ( zStream );
-      if (fd < 0) goto errhandler_io;
-      ret = applySavedFileAttrToOutputFile ( fd );
-      if (ret != 0) goto errhandler_io;
      ret = fclose ( zStream );
      outputHandleJustInCase = NULL;
      if (ret == EOF) goto errhandler_io;
@@ -530,7 +525,6 @@ Bool uncompressStream ( FILE *zStream, FILE *stream )
   UChar   obuf[5000];
   UChar   unused[BZ_MAX_UNUSED];
   Int32   nUnused;
-   void*   unusedTmpV;
   UChar*  unusedTmp;

   nUnused = 0;
@@ -560,10 +554,9 @@ Bool uncompressStream ( FILE *zStream, FILE *stream )
      }
      if (bzerr != BZ_STREAM_END) goto errhandler;

-      BZ2_bzReadGetUnused ( &bzerr, bzf, &unusedTmpV, &nUnused );
+      BZ2_bzReadGetUnused ( &bzerr, bzf, (void**)(&unusedTmp), &nUnused );
      if (bzerr != BZ_OK) panic ( "decompress:bzReadGetUnused" );

-      unusedTmp = (UChar*)unusedTmpV;
      for (i = 0; i < nUnused; i++) unused[i] = unusedTmp[i];

      BZ2_bzReadClose ( &bzerr, bzf );
@@ -574,12 +567,6 @@ Bool uncompressStream ( FILE *zStream, FILE *stream )

   closeok:
   if (ferror(zStream)) goto errhandler_io;
-   if ( stream != stdout) {
-      int fd = fileno ( stream );
-      if (fd < 0) goto errhandler_io;
-      ret = applySavedFileAttrToOutputFile ( fd );
-      if (ret != 0) goto errhandler_io;
-   }
   ret = fclose ( zStream );
   if (ret == EOF) goto errhandler_io;

@@ -652,7 +639,6 @@ Bool testStream ( FILE *zStream )
   UChar   obuf[5000];
   UChar   unused[BZ_MAX_UNUSED];
   Int32   nUnused;
-   void*   unusedTmpV;
   UChar*  unusedTmp;

   nUnused = 0;
@@ -676,10 +662,9 @@ Bool testStream ( FILE *zStream )
      }
      if (bzerr != BZ_STREAM_END) goto errhandler;

-      BZ2_bzReadGetUnused ( &bzerr, bzf, &unusedTmpV, &nUnused );
+      BZ2_bzReadGetUnused ( &bzerr, bzf, (void**)(&unusedTmp), &nUnused );
      if (bzerr != BZ_OK) panic ( "test:bzReadGetUnused" );

-      unusedTmp = (UChar*)unusedTmpV;
      for (i = 0; i < nUnused; i++) unused[i] = unusedTmp[i];

      BZ2_bzReadClose ( &bzerr, bzf );
@@ -1140,7 +1125,7 @@ void saveInputFileMetaInfo ( Char *srcName )


 static 
-void applySavedTimeInfoToOutputFile ( Char *dstName )
+void applySavedMetaInfoToOutputFile ( Char *dstName )
 {
 #  if BZ_UNIX
   IntNative      retVal;
@@ -1149,26 +1134,16 @@ void applySavedTimeInfoToOutputFile ( Char *dstName )
   uTimBuf.actime = fileMetaInfo.st_atime;
   uTimBuf.modtime = fileMetaInfo.st_mtime;

+   retVal = chmod ( dstName, fileMetaInfo.st_mode );
+   ERROR_IF_NOT_ZERO ( retVal );
+
   retVal = utime ( dstName, &uTimBuf );
   ERROR_IF_NOT_ZERO ( retVal );
-#  endif
-}

-static 
-int applySavedFileAttrToOutputFile ( int fd )
-{
-#  if BZ_UNIX
-   IntNative      retVal;
-
-   retVal = fchmod ( fd, fileMetaInfo.st_mode );
-   if (retVal != 0)
-       return retVal;
-
-   (void) fchown ( fd, fileMetaInfo.st_uid, fileMetaInfo.st_gid );
+   retVal = chown ( dstName, fileMetaInfo.st_uid, fileMetaInfo.st_gid );
   /* chown() will in many cases return with EPERM, which can
      be safely ignored.
   */
-   return 0;
 #  endif
 }

@@ -1391,7 +1366,7 @@ void compress ( Char *name )

   /*--- If there was an I/O error, we won't get here. ---*/
   if ( srcMode == SM_F2F ) {
-      applySavedTimeInfoToOutputFile ( outName );
+      applySavedMetaInfoToOutputFile ( outName );
      deleteOutputOnInterrupt = False;
      if ( !keepInputFiles ) {
         IntNative retVal = remove ( inName );
@@ -1569,7 +1544,7 @@ void uncompress ( Char *name )
   /*--- If there was an I/O error, we won't get here. ---*/
   if ( magicNumberOK ) {
      if ( srcMode == SM_F2F ) {
-         applySavedTimeInfoToOutputFile ( outName );
+         applySavedMetaInfoToOutputFile ( outName );
         deleteOutputOnInterrupt = False;
         if ( !keepInputFiles ) {
            IntNative retVal = remove ( inName );
@@ -574,11 +574,8 @@ int BZ_API(BZ2_bzDecompressInit)


 /*---------------------------------------------------*/
-/* Return  True iff data corruption is discovered.
-   Returns False if there is no problem.
-*/
 static
-Bool unRLE_obuf_to_output_FAST ( DState* s )
+void unRLE_obuf_to_output_FAST ( DState* s )
 {
   UChar k1;

@@ -587,7 +584,7 @@ Bool unRLE_obuf_to_output_FAST ( DState* s )
      while (True) {
         /* try to finish existing run */
         while (True) {
-            if (s->strm->avail_out == 0) return False;
+            if (s->strm->avail_out == 0) return;
            if (s->state_out_len == 0) break;
            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
@@ -597,13 +594,10 @@ Bool unRLE_obuf_to_output_FAST ( DState* s )
            s->strm->total_out_lo32++;
            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
         }
-
+   
         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return False;
+         if (s->nblock_used == s->save_nblock+1) return;
               
-         /* Only caused by corrupt data stream? */
-         if (s->nblock_used > s->save_nblock+1)
-            return True;
   
         s->state_out_len = 1;
         s->state_out_ch = s->k0;
@@ -673,10 +667,6 @@ Bool unRLE_obuf_to_output_FAST ( DState* s )
               cs_avail_out--;
            }
         }   
-         /* Only caused by corrupt data stream? */
-         if (c_nblock_used > s_save_nblockPP)
-            return True;
-
         /* can a new run be started? */
         if (c_nblock_used == s_save_nblockPP) {
            c_state_out_len = 0; goto return_notr;
@@ -722,7 +712,6 @@ Bool unRLE_obuf_to_output_FAST ( DState* s )
      s->strm->avail_out    = cs_avail_out;
      /* end save */
   }
-   return False;
 }


@@ -743,11 +732,8 @@ __inline__ Int32 BZ2_indexIntoF ( Int32 indx, Int32 *cftab )


 /*---------------------------------------------------*/
-/* Return  True iff data corruption is discovered.
-   Returns False if there is no problem.
-*/
 static
-Bool unRLE_obuf_to_output_SMALL ( DState* s )
+void unRLE_obuf_to_output_SMALL ( DState* s )
 {
   UChar k1;

@@ -756,7 +742,7 @@ Bool unRLE_obuf_to_output_SMALL ( DState* s )
      while (True) {
         /* try to finish existing run */
         while (True) {
-            if (s->strm->avail_out == 0) return False;
+            if (s->strm->avail_out == 0) return;
            if (s->state_out_len == 0) break;
            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
@@ -768,11 +754,8 @@ Bool unRLE_obuf_to_output_SMALL ( DState* s )
         }
   
         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return False;
-
-         /* Only caused by corrupt data stream? */
-         if (s->nblock_used > s->save_nblock+1)
-            return True;
+         if (s->nblock_used == s->save_nblock+1) return;
+               
   
         s->state_out_len = 1;
         s->state_out_ch = s->k0;
@@ -805,7 +788,7 @@ Bool unRLE_obuf_to_output_SMALL ( DState* s )
      while (True) {
         /* try to finish existing run */
         while (True) {
-            if (s->strm->avail_out == 0) return False;
+            if (s->strm->avail_out == 0) return;
            if (s->state_out_len == 0) break;
            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
@@ -817,11 +800,7 @@ Bool unRLE_obuf_to_output_SMALL ( DState* s )
         }
   
         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return False;
-
-         /* Only caused by corrupt data stream? */
-         if (s->nblock_used > s->save_nblock+1)
-            return True;
+         if (s->nblock_used == s->save_nblock+1) return;
   
         s->state_out_len = 1;
         s->state_out_ch = s->k0;
@@ -851,7 +830,6 @@ Bool unRLE_obuf_to_output_SMALL ( DState* s )
 /*---------------------------------------------------*/
 int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
 {
-   Bool    corrupt;
   DState* s;
   if (strm == NULL) return BZ_PARAM_ERROR;
   s = strm->state;
@@ -862,13 +840,12 @@ int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
      if (s->state == BZ_X_IDLE) return BZ_SEQUENCE_ERROR;
      if (s->state == BZ_X_OUTPUT) {
         if (s->smallDecompress)
-            corrupt = unRLE_obuf_to_output_SMALL ( s ); else
-            corrupt = unRLE_obuf_to_output_FAST  ( s );
-         if (corrupt) return BZ_DATA_ERROR;
+            unRLE_obuf_to_output_SMALL ( s ); else
+            unRLE_obuf_to_output_FAST  ( s );
         if (s->nblock_used == s->save_nblock+1 && s->state_out_len == 0) {
            BZ_FINALISE_CRC ( s->calculatedBlockCRC );
            if (s->verbosity >= 3) 
-               VPrintf2 ( " {0x%08x, 0x%08x}", s->storedBlockCRC, 
+               VPrintf2 ( " {0x%x, 0x%x}", s->storedBlockCRC, 
                          s->calculatedBlockCRC );
            if (s->verbosity >= 2) VPrintf0 ( "]" );
            if (s->calculatedBlockCRC != s->storedBlockCRC)
@@ -886,7 +863,7 @@ int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
         Int32 r = BZ2_decompress ( s );
         if (r == BZ_STREAM_END) {
            if (s->verbosity >= 3)
-               VPrintf2 ( "\n    combined CRCs: stored = 0x%08x, computed = 0x%08x", 
+               VPrintf2 ( "\n    combined CRCs: stored = 0x%x, computed = 0x%x", 
                          s->storedCombinedCRC, s->calculatedCombinedCRC );
            if (s->calculatedCombinedCRC != s->storedCombinedCRC)
               return BZ_DATA_ERROR;
@@ -488,11 +488,9 @@ void sendMTFValues ( EState* s )
      /*--
        Recompute the tables based on the accumulated frequencies.
      --*/
-      /* maxLen was changed from 20 to 17 in bzip2-1.0.3.  See 
-         comment in huffman.c for details. */
      for (t = 0; t < nGroups; t++)
         BZ2_hbMakeCodeLengths ( &(s->len[t][0]), &(s->rfreq[t][0]), 
-                                 alphaSize, 17 /*20*/ );
+                                 alphaSize, 20 );
   }


@@ -529,7 +527,7 @@ void sendMTFValues ( EState* s )
         if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
         if (s->len[t][i] < minLen) minLen = s->len[t][i];
      }
-      AssertH ( !(maxLen > 17 /*20*/ ), 3004 );
+      AssertH ( !(maxLen > 20), 3004 );
      AssertH ( !(minLen < 1),  3005 );
      BZ2_hbAssignCodes ( &(s->code[t][0]), &(s->len[t][0]), 
                          minLen, maxLen, alphaSize );
@@ -653,8 +651,8 @@ void BZ2_compressBlock ( EState* s, Bool is_last_block )
      if (s->blockNo > 1) s->numZ = 0;

      if (s->verbosity >= 2)
-         VPrintf4( "    block %d: crc = 0x%08x, "
-                   "combined CRC = 0x%08x, size = %d\n",
+         VPrintf4( "    block %d: crc = 0x%8x, "
+                   "combined CRC = 0x%8x, size = %d\n",
                   s->blockNo, s->blockCRC, s->combinedCRC, s->nblock );

      BZ2_blockSort ( s );
@@ -705,7 +703,7 @@ void BZ2_compressBlock ( EState* s, Bool is_last_block )
      bsPutUChar ( s, 0x50 ); bsPutUChar ( s, 0x90 );
      bsPutUInt32 ( s, s->combinedCRC );
      if (s->verbosity >= 2)
-         VPrintf1( "    final combined CRC = 0x%08x\n   ", s->combinedCRC );
+         VPrintf1( "    final combined CRC = 0x%x\n   ", s->combinedCRC );
      bsFinishWrite ( s );
   }
 }
@@ -524,23 +524,17 @@ Int32 BZ2_decompress ( DState* s )
      if (s->origPtr < 0 || s->origPtr >= nblock)
         RETURN(BZ_DATA_ERROR);

-      /*-- Set up cftab to facilitate generation of T^(-1) --*/
-      s->cftab[0] = 0;
-      for (i = 1; i <= 256; i++) s->cftab[i] = s->unzftab[i-1];
-      for (i = 1; i <= 256; i++) s->cftab[i] += s->cftab[i-1];
-      for (i = 0; i <= 256; i++) {
-         if (s->cftab[i] < 0 || s->cftab[i] > nblock) {
-            /* s->cftab[i] can legitimately be == nblock */
-            RETURN(BZ_DATA_ERROR);
-         }
-      }
-
      s->state_out_len = 0;
      s->state_out_ch  = 0;
      BZ_INITIALISE_CRC ( s->calculatedBlockCRC );
      s->state = BZ_X_OUTPUT;
      if (s->verbosity >= 2) VPrintf0 ( "rt+rld" );

+      /*-- Set up cftab to facilitate generation of T^(-1) --*/
+      s->cftab[0] = 0;
+      for (i = 1; i <= 256; i++) s->cftab[i] = s->unzftab[i-1];
+      for (i = 1; i <= 256; i++) s->cftab[i] += s->cftab[i-1];
+
      if (s->smallDecompress) {

         /*-- Make a copy of cftab, used in generation of T --*/
@@ -162,24 +162,7 @@ void BZ2_hbMakeCodeLengths ( UChar *len,
      
      if (! tooLong) break;

-      /* 17 Oct 04: keep-going condition for the following loop used
-         to be 'i < alphaSize', which missed the last element,
-         theoretically leading to the possibility of the compressor
-         looping.  However, this count-scaling step is only needed if
-         one of the generated Huffman code words is longer than
-         maxLen, which up to and including version 1.0.2 was 20 bits,
-         which is extremely unlikely.  In version 1.0.3 maxLen was
-         changed to 17 bits, which has minimal effect on compression
-         ratio, but does mean this scaling step is used from time to
-         time, enough to verify that it works.
-
-         This means that bzip2-1.0.3 and later will only produce
-         Huffman codes with a maximum length of 17 bits.  However, in
-         order to preserve backwards compatibility with bitstreams
-         produced by versions pre-1.0.3, the decompressor must still
-         handle lengths of up to 20. */
-
-      for (i = 1; i <= alphaSize; i++) {
+      for (i = 1; i < alphaSize; i++) {
         j = weight[i] >> 8;
         j = 1 + (j / 2);
         weight[i] = j << 8;
@@ -46,19 +46,6 @@ $FreeBSD$
 #define lchown chown
 #endif

-# ifndef DIRECTORY_SEPARATOR
-#  define DIRECTORY_SEPARATOR '/'
-# endif
-
-# ifndef ISSLASH
-#  define ISSLASH(C) ((C) == DIRECTORY_SEPARATOR)
-# endif
-
-# ifndef FILE_SYSTEM_PREFIX_LEN
-#  define FILE_SYSTEM_PREFIX_LEN(Filename) 0
-# endif
-
-
 static void read_pattern_file ();
 static void tape_skip_padding ();
 static void defer_copyin ();
@@ -389,54 +376,6 @@ swab_array (ptr, count)
 /* Current time for verbose table.  */
 static time_t current_time;

-/* Return a safer suffix of FILE_NAME, or "." if it has no safer
-   suffix.  Check for fully specified file names and other atrocities.  */
-
-static const char *
-safer_name_suffix (char const *file_name)
-{
-  char const *p;
-
-  /* Skip file system prefixes, leading file name components that contain
-     "..", and leading slashes.  */
-
-  size_t prefix_len = FILE_SYSTEM_PREFIX_LEN (file_name);
-
-  for (p = file_name + prefix_len; *p;)
-    {
-      if (p[0] == '.' && p[1] == '.' && (ISSLASH (p[2]) || !p[2]))
-       prefix_len = p + 2 - file_name;
-
-      do
-       {
-         char c = *p++;
-         if (ISSLASH (c))
-           break;
-       }
-      while (*p);
-    }
-
-  for (p = file_name + prefix_len; ISSLASH (*p); p++)
-    continue;
-  prefix_len = p - file_name;
-
-  if (prefix_len)
-    {
-      char *prefix = alloca (prefix_len + 1);
-      memcpy (prefix, file_name, prefix_len);
-      prefix[prefix_len] = '\0';
-
-
-      error (0, 0, "Removing leading `%s' from member names", prefix);
-    }
-
-  if (!*p)
-    p = ".";
-
-  return p;
-}
-
-
 /* Read the collection from standard input and create files
   in the file system.  */

@@ -457,7 +396,6 @@ process_copy_in ()
  int in_file_des;		/* Input file descriptor.  */
  char skip_file;		/* Flag for use with patterns.  */
  int existing_dir;		/* True if file is a dir & already exists.  */
-  mode_t existing_mode;
  int i;			/* Loop index variable.  */
  char *link_name = NULL;	/* Name of hard and symbolic links.  */
 #ifdef HPUX_CDF
@@ -556,11 +494,18 @@ process_copy_in ()

      /* Do we have to ignore absolute paths, and if so, does the filename
         have an absolute path?  */
-      if (!abs_paths_flag && file_hdr.c_name && file_hdr.c_name[0])
+      if (no_abs_paths_flag && file_hdr.c_name && file_hdr.c_name [0] == '/')
 	{
-	  const char *p = safer_name_suffix (file_hdr.c_name);
+	  char *p;

-	  if (p != file_hdr.c_name)
+	  p = file_hdr.c_name;
+	  while (*p == '/')
+	    ++p;
+	  if (*p == '\0')
+	    {
+	      strcpy (file_hdr.c_name, ".");
+	    }
+	  else
 	    {
 	      char *non_abs_name;

@@ -697,7 +642,6 @@ process_copy_in ()
 		     we are trying to create, don't complain about
 		     it.  */
 		  existing_dir = TRUE;
-		  existing_mode = file_stat.st_mode;
 		}
 	      else if (!unconditional_flag
 		       && file_hdr.c_mtime <= file_stat.st_mtime)
@@ -834,6 +778,8 @@ process_copy_in ()
 		    }
 		  copy_files_tape_to_disk (in_file_des, out_file_des, file_hdr.c_filesize);
 		  disk_empty_output_buffer (out_file_des);
+		  if (close (out_file_des) < 0)
+		    error (0, errno, "%s", file_hdr.c_name);

 		  if (archive_format == arf_crcascii)
 		    {
@@ -843,15 +789,13 @@ process_copy_in ()
 		    }
 		  /* File is now copied; set attributes.  */
 		  if (!no_chown_flag)
-		    if ((fchown (out_file_des,
+		    if ((chown (file_hdr.c_name,
 				set_owner_flag ? set_owner : file_hdr.c_uid,
 			   set_group_flag ? set_group : file_hdr.c_gid) < 0)
 			&& errno != EPERM)
 		      error (0, errno, "%s", file_hdr.c_name);
 		  /* chown may have turned off some permissions we wanted. */
-		  if (fchmod (out_file_des, (int) file_hdr.c_mode) < 0)
-		    error (0, errno, "%s", file_hdr.c_name);
-		  if (close (out_file_des) < 0)
+		  if (chmod (file_hdr.c_name, (int) file_hdr.c_mode) < 0)
 		    error (0, errno, "%s", file_hdr.c_name);
 		  if (retain_time_flag)
 		    {
@@ -903,23 +847,14 @@ process_copy_in ()
 		      cdf_flag = 1;
 		    }
 #endif
-		  res = mkdir (file_hdr.c_name, file_hdr.c_mode & ~077);
+		  res = mkdir (file_hdr.c_name, file_hdr.c_mode);
 		}
 	      else
-		{
-		  if (!no_chown_flag && (existing_mode & 077) != 0
-		     && chmod (file_hdr.c_name, existing_mode & 07700) < 0)
-		   {
-		     error (0, errno, "%s: chmod", file_hdr.c_name);
-		     return;
-		   }
-		   res = 0;
-		}
-
+		res = 0;
 	      if (res < 0 && create_dir_flag)
 		{
 		  create_all_directories (file_hdr.c_name);
-		  res = mkdir (file_hdr.c_name, file_hdr.c_mode & ~077);
+		  res = mkdir (file_hdr.c_name, file_hdr.c_mode);
 		}
 	      if (res < 0)
 		{
@@ -1001,20 +936,20 @@ process_copy_in ()
 	      
 #ifdef CP_IFIFO
 	      if ((file_hdr.c_mode & CP_IFMT) == CP_IFIFO)
-		res = mkfifo (file_hdr.c_name, file_hdr.c_mode & ~077);
+		res = mkfifo (file_hdr.c_name, file_hdr.c_mode);
 	      else
 #endif
-		res = mknod (file_hdr.c_name, file_hdr.c_mode & ~077,
+		res = mknod (file_hdr.c_name, file_hdr.c_mode,
 		      makedev (file_hdr.c_rdev_maj, file_hdr.c_rdev_min));
 	      if (res < 0 && create_dir_flag)
 		{
 		  create_all_directories (file_hdr.c_name);
 #ifdef CP_IFIFO
 		  if ((file_hdr.c_mode & CP_IFMT) == CP_IFIFO)
-		    res = mkfifo (file_hdr.c_name, file_hdr.c_mode & ~077);
+		    res = mkfifo (file_hdr.c_name, file_hdr.c_mode);
 		  else
 #endif
-		    res = mknod (file_hdr.c_name, file_hdr.c_mode & ~077,
+		    res = mknod (file_hdr.c_name, file_hdr.c_mode,
 				 makedev (file_hdr.c_rdev_maj,
 					  file_hdr.c_rdev_min));
 		}
@@ -1441,18 +1376,18 @@ create_final_defers ()
 	  continue;
 	}

-  
+      if (close (out_file_des) < 0)
+	error (0, errno, "%s", d->header.c_name);
+
      /* File is now copied; set attributes.  */
      if (!no_chown_flag)
-	if ((fchown (out_file_des,
+	if ((chown (d->header.c_name,
 		    set_owner_flag ? set_owner : d->header.c_uid,
 	       set_group_flag ? set_group : d->header.c_gid) < 0)
 	    && errno != EPERM)
 	  error (0, errno, "%s", d->header.c_name);
      /* chown may have turned off some permissions we wanted. */
-      if (fchmod (out_file_des, (int) d->header.c_mode) < 0)
-	error (0, errno, "%s", d->header.c_name);
-      if (close (out_file_des) < 0)
+      if (chmod (d->header.c_name, (int) d->header.c_mode) < 0)
 	error (0, errno, "%s", d->header.c_name);
      if (retain_time_flag)
 	{
@@ -49,13 +49,12 @@ write_out_header (file_hdr, out_des)
    {
      char ascii_header[112];
      char *magic_string;
-      int ret;

      if (archive_format == arf_crcascii)
 	magic_string = "070702";
      else
 	magic_string = "070701";
-      ret = snprintf (ascii_header, sizeof(ascii_header),
+      sprintf (ascii_header,
 	       "%6s%08lx%08lx%08lx%08lx%08lx%08lx%08lx%08lx%08lx%08lx%08lx%08lx%08lx",
 	       magic_string,
 	       file_hdr->c_ino, file_hdr->c_mode, file_hdr->c_uid,
@@ -63,10 +62,6 @@ write_out_header (file_hdr, out_des)
 	     file_hdr->c_filesize, file_hdr->c_dev_maj, file_hdr->c_dev_min,
 	   file_hdr->c_rdev_maj, file_hdr->c_rdev_min, file_hdr->c_namesize,
 	       file_hdr->c_chksum);
-      if (ret >= sizeof(ascii_header)) {
-	fprintf(stderr, "Internal overflow, aborting\n");
-	exit (1);
-      }
      tape_buffered_write (ascii_header, out_des, 110L);

      /* Write file name to output.  */
@@ -76,7 +71,6 @@ write_out_header (file_hdr, out_des)
  else if (archive_format == arf_oldascii || archive_format == arf_hpoldascii)
    {
      char ascii_header[78];
-      int ret;
 #ifndef __MSDOS__
      dev_t dev;
      dev_t rdev;
@@ -118,7 +112,7 @@ write_out_header (file_hdr, out_des)
      if ((file_hdr->c_ino >> 16) != 0)
 	error (0, 0, "%s: truncating inode number", file_hdr->c_name);

-      ret = snprintf (ascii_header, sizeof(ascii_header),
+      sprintf (ascii_header,
 	       "%06o%06o%06lo%06lo%06lo%06lo%06lo%06o%011lo%06lo%011lo",
 	       file_hdr->c_magic & 0xFFFF, dev & 0xFFFF,
 	       file_hdr->c_ino & 0xFFFF, file_hdr->c_mode & 0xFFFF,
@@ -126,10 +120,6 @@ write_out_header (file_hdr, out_des)
 	       file_hdr->c_nlink & 0xFFFF, rdev & 0xFFFF,
 	       file_hdr->c_mtime, file_hdr->c_namesize & 0xFFFF,
 	       file_hdr->c_filesize);
-      if (ret >= sizeof(ascii_header)) {
-	fprintf(stderr, "Internal overflow, aborting\n");
-	exit (1);
-      }
      tape_buffered_write (ascii_header, out_des, 76L);

      /* Write file name to output.  */
@@ -268,14 +258,6 @@ process_copy_out ()
 	  file_hdr.c_dev_maj = major (file_stat.st_dev);
 	  file_hdr.c_dev_min = minor (file_stat.st_dev);
 	  file_hdr.c_ino = file_stat.st_ino;
-
-	  /* Skip files larger than 4GB which will cause problems on
-	     64bit platforms (and just not work on 32bit). */
-	  if (file_stat.st_size > 0xffffffff) {
-	    error (0, 0, "%s: skipping >4GB file", input_name.ds_string);
-	    continue;
-	  }
-
 	  /* For POSIX systems that don't define the S_IF macros,
 	     we can't assume that S_ISfoo means the standard Unix
 	     S_IFfoo bit(s) are set.  So do it manually, with a
@@ -173,18 +173,18 @@ process_copy_pass ()
 	      disk_empty_output_buffer (out_file_des);
 	      if (close (in_file_des) < 0)
 		error (0, errno, "%s", input_name.ds_string);
+	      if (close (out_file_des) < 0)
+		error (0, errno, "%s", output_name.ds_string);

 	      /* Set the attributes of the new file.  */
 	      if (!no_chown_flag)
-		if ((fchown (out_file_des,
+		if ((chown (output_name.ds_string,
 			    set_owner_flag ? set_owner : in_file_stat.st_uid,
 		      set_group_flag ? set_group : in_file_stat.st_gid) < 0)
 		    && errno != EPERM)
 		  error (0, errno, "%s", output_name.ds_string);
 	      /* chown may have turned off some permissions we wanted. */
-	      if (fchmod (out_file_des, in_file_stat.st_mode) < 0)
-		error (0, errno, "%s", output_name.ds_string);
-	      if (close (out_file_des) < 0)
+	      if (chmod (output_name.ds_string, in_file_stat.st_mode) < 0)
 		error (0, errno, "%s", output_name.ds_string);
 	      if (reset_time_flag)
 		{
@@ -223,24 +223,15 @@ process_copy_pass ()
 		  cdf_flag = 1;
 		}
 #endif
-	      res = mkdir (output_name.ds_string, in_file_stat.st_mode & ~077);
+	      res = mkdir (output_name.ds_string, in_file_stat.st_mode);

 	    }
 	  else
-            {
-              if (!no_chown_flag && (out_file_stat.st_mode & 077) != 0
-                  && chmod (output_name.ds_string, out_file_stat.st_mode & 07700) < 0)
-                {
-                  error (0, errno, "%s: chmod", output_name.ds_string);
-                  continue;
-                }
-              res = 0;
-            }
-
+	    res = 0;
 	  if (res < 0 && create_dir_flag)
 	    {
 	      create_all_directories (output_name.ds_string);
-	      res = mkdir (output_name.ds_string, in_file_stat.st_mode & ~077);
+	      res = mkdir (output_name.ds_string, in_file_stat.st_mode);
 	    }
 	  if (res < 0)
 	    {
@@ -306,20 +297,20 @@ process_copy_pass ()
 	    {
 #ifdef S_ISFIFO
 	      if (S_ISFIFO (in_file_stat.st_mode))
-		res = mkfifo (output_name.ds_string, in_file_stat.st_mode & ~077);
+		res = mkfifo (output_name.ds_string, in_file_stat.st_mode);
 	      else
 #endif
-		res = mknod (output_name.ds_string, in_file_stat.st_mode & ~077,
+		res = mknod (output_name.ds_string, in_file_stat.st_mode,
 			     in_file_stat.st_rdev);
 	      if (res < 0 && create_dir_flag)
 		{
 		  create_all_directories (output_name.ds_string);
 #ifdef S_ISFIFO
 		  if (S_ISFIFO (in_file_stat.st_mode))
-		    res = mkfifo (output_name.ds_string, in_file_stat.st_mode & ~077);
+		    res = mkfifo (output_name.ds_string, in_file_stat.st_mode);
 		  else
 #endif
-		    res = mknod (output_name.ds_string, in_file_stat.st_mode & ~077,
+		    res = mknod (output_name.ds_string, in_file_stat.st_mode,
 				 in_file_stat.st_rdev);
 		}
 	      if (res < 0)
@@ -19,7 +19,7 @@ cpio \- copy files to and from archives
 [\-\-unconditional] [\-\-verbose] [\-\-block-size=blocks] [\-\-swap-halfwords]
 [\-\-io-size=bytes] [\-\-pattern-file=file] [\-\-format=format]
 [\-\-owner=[user][:.][group]] [\-\-no-preserve-owner] [\-\-message=message]
-[\-\-force\-local] [\-\-absolute\-filenames] [\-\-sparse] [\-\-only\-verify\-crc]
+[\-\-force\-local] [\-\-no\-absolute\-filenames] [\-\-sparse] [\-\-only\-verify\-crc]
 [\-\-quiet] [\-\-help] [\-\-version] [pattern...] [< archive]

 .B cpio
@@ -251,9 +251,9 @@ current volume number (starting at 1).
 In the verbose table of contents listing, show numeric UID and GID
 instead of translating them into names.
 .TP
-.I " \-\-absolute-filenames"
-Do not strip leading file name components that contain ".."
-and leading slashes from file names in copy-in mode
+.I " \-\-no-absolute-filenames"
+In copy-in mode, create all files relative to the current directory,
+even if they have an absolute file name in the archive.
 .TP
 .I " \-\-no-preserve-owner"
 In copy-in mode and copy-pass mode, do not change the ownership of the
@@ -46,7 +46,7 @@ extern int no_chown_flag;
 extern int sparse_flag;
 extern int quiet_flag;
 extern int only_verify_crc_flag;
-extern int abs_paths_flag;
+extern int no_abs_paths_flag;

 extern int last_header_start;
 extern int copy_matching_files;
@@ -98,8 +98,8 @@ int quiet_flag = FALSE;
   actually extract the files. */
 int only_verify_crc_flag = FALSE;

-/* If TRUE, allow any absolute paths */
-int abs_paths_flag = FALSE;
+/* If TRUE, don't use any absolute paths, prefix them by `./'.  */
+int no_abs_paths_flag = FALSE;

 #ifdef DEBUG_CPIO
 /* If TRUE, print debugging information.  */
@@ -56,7 +56,7 @@ struct option long_opts[] =
  {"list", 0, &table_flag, TRUE},
  {"make-directories", 0, &create_dir_flag, TRUE},
  {"message", 1, 0, 'M'},
-  {"absolute-filenames", 0, 0, 136},
+  {"no-absolute-filenames", 0, 0, 136},
  {"no-preserve-owner", 0, 0, 134},
  {"nonmatching", 0, &copy_matching_files, FALSE},
  {"numeric-uid-gid", 0, &numeric_uid, TRUE},
@@ -105,7 +105,7 @@ Usage: %s {-o|--create} [-0acvABLV] [-C bytes] [-H format] [-M message]\n\
       [--unconditional] [--verbose] [--block-size=blocks] [--swap-halfwords]\n\
       [--io-size=bytes] [--pattern-file=file] [--format=format]\n\
       [--owner=[user][:.][group]] [--no-preserve-owner] [--message=message]\n\
-       [--force-local] [--absolute-filenames] [--sparse] [--only-verify-crc]\n\
+       [--force-local] [--no-absolute-filenames] [--sparse] [--only-verify-crc]\n\
       [--quiet] [--help] [--version] [pattern...] [< archive]\n",
 	   program_name);
  fprintf (fp, "\
@@ -266,8 +266,8 @@ crc newc odc bin ustar tar (all-caps also recognized)", optarg);
 	  numeric_uid = TRUE;
 	  break;

-	case 136:		/* --absolute-filenames */
-	  abs_paths_flag = TRUE;
+	case 136:		/* --no-absolute-filenames */
+	  no_abs_paths_flag = TRUE;
 	  break;
 	
 	case 134:		/* --no-preserve-owner */
@@ -414,7 +414,7 @@ crc newc odc bin ustar tar (all-caps also recognized)", optarg);
 	  || retain_time_flag || no_chown_flag || set_owner_flag
 	  || set_group_flag || swap_bytes_flag || swap_halfwords_flag
 	  || (append_flag && !(archive_name || output_archive_name))
-	  || rename_batch_file || abs_paths_flag
+	  || rename_batch_file || no_abs_paths_flag
 	  || input_archive_name || (archive_name && output_archive_name))
 	usage (stderr, 2);
      if (archive_format == arf_unknown)
@@ -429,7 +429,7 @@ crc newc odc bin ustar tar (all-caps also recognized)", optarg);
      if (argc - 1 != optind || archive_format != arf_unknown
 	  || swap_bytes_flag || swap_halfwords_flag
 	  || table_flag || rename_flag || append_flag
-	  || rename_batch_file || abs_paths_flag)
+	  || rename_batch_file || no_abs_paths_flag)
 	usage (stderr, 2);
      directory_name = argv[optind];
    }
@@ -109,12 +109,14 @@ elif [ -f /bin/domainname ]; then
    /usr/bin/ypcat passwd 2>/dev/null | cat - /etc/passwd | grep "^$LOGNAME:" |
      cut -f5 -d':' | sed -e 's/,.*//' > $TEMP
    ORIGINATOR="`cat $TEMP`"
+    rm -f $TEMP
  fi
 fi

 if [ "$ORIGINATOR" = "" ]; then
  grep "^$LOGNAME:" /etc/passwd | cut -f5 -d':' | sed -e 's/,.*//' > $TEMP
  ORIGINATOR="`cat $TEMP`"
+  rm -f $TEMP
 fi

 if [ -n "$ORGANIZATION" ]; then
@@ -116,7 +116,7 @@ password_entry_parseline (cvsroot_canonical, warn, linenumber, linebuf)

 	if (isspace(*(linebuf + 1)))
 	    /* special case since strtoul ignores leading white space */
-	    q = linebuf + 1;
+	    entry_version = 0;
 	else
 	    entry_version = strtoul (linebuf + 1, &q, 10);

@@ -429,16 +429,6 @@ warning: this CVS does not support PreservePermissions");
 	    else if (strcmp (p, "stat") == 0)
 	      RereadLogAfterVerify = LOGMSG_REREAD_STAT;
 	}
-	else if (strcmp(line, "LocalKeyword") == 0)
-	{
-	    /* Recognize cvs-1.12-style keyword control rather than erroring out. */
-	    RCS_setlocalid(p);
-	}
-	else if (strcmp(line, "KeywordExpand") == 0)
-	{
-	    /* Recognize cvs-1.12-style keyword control rather than erroring out. */
-	    RCS_setincexc(p);
-	}
 	else
 	{
 	    /* We may be dealing with a keyword which was added in a
@@ -385,7 +385,6 @@ patch_fileproc (callerdat, finfo)
    struct utimbuf t;
    char *vers_tag, *vers_head;
    char *rcs = NULL;
-    char *rcs_orig = NULL;
    RCSNode *rcsfile;
    FILE *fp1, *fp2, *fp3;
    int ret = 0;
@@ -416,7 +415,7 @@ patch_fileproc (callerdat, finfo)
    if ((rcsfile->flags & VALID) && (rcsfile->flags & INATTIC))
 	isattic = 1;

-    rcs_orig = rcs = xmalloc (strlen (finfo->file) + sizeof (RCSEXT) + 5);
+    rcs = xmalloc (strlen (finfo->file) + sizeof (RCSEXT) + 5);
    (void) sprintf (rcs, "%s%s", finfo->file, RCSEXT);

    /* if vers_head is NULL, may have been removed from the release */
@@ -758,8 +757,8 @@ failed to read diff file header %s for %s: end of file", tmpfile3, rcs);
 	free (vers_tag);
    if (vers_head != NULL)
 	free (vers_head);
-    if (rcs_orig)
-	free (rcs_orig);
+    if (rcs != NULL)
+	free (rcs);
    return ret;
 }

@@ -3040,7 +3040,8 @@ RCS_getdate (rcs, date, force_tag_match)
    if (retval != NULL)
 	return (retval);

-    if (vers && (!force_tag_match || RCS_datecmp (vers->date, date) <= 0))
+    if (!force_tag_match ||
+	(vers != NULL && RCS_datecmp (vers->date, date) <= 0))
 	return xstrdup (vers->version);
    else
 	return NULL;
@@ -4137,7 +4138,7 @@ RCS_checkout (rcs, workfile, rev, nametag, options, sout, pfn, callerdat)
    size_t len;
    int free_value = 0;
    char *log = NULL;
-    size_t loglen = 0;
+    size_t loglen;
    Node *vp = NULL;
 #ifdef PRESERVE_PERMISSIONS_SUPPORT
    uid_t rcs_owner = (uid_t) -1;
@@ -7455,7 +7456,7 @@ RCS_deltas (rcs, fp, rcsbuf, version, op, text, len, log, loglen)

 		for (ln = 0; ln < headlines.nlines; ++ln)
 		{
-		    char *buf;
+		    char buf[80];
 		    /* Period which separates year from month in date.  */
 		    char *ym;
 		    /* Period which separates month from day in date.  */
@@ -7466,12 +7467,10 @@ RCS_deltas (rcs, fp, rcsbuf, version, op, text, len, log, loglen)
 		    if (prvers == NULL)
 			prvers = vers;

-		    buf = xmalloc (strlen (prvers->version) + 24);
 		    sprintf (buf, "%-12s (%-8.8s ",
 			     prvers->version,
 			     prvers->author);
 		    cvs_output (buf, 0);
-		    free (buf);

 		    /* Now output the date.  */
 		    ym = strchr (prvers->date, '.');
@@ -551,6 +551,10 @@
 .ds doc-date-12 December
 .
 .de Dd
+.  \" XXX: why do we need gX?
+.  if "\*[doc-date-string]"" \
+.    nr gX 1
+.
 .  ie \n[.$] \{\
 .    ie (\n[.$] == 3) \
 .      ds doc-date-string \$1\~\$2 \$3
@@ -180,6 +180,8 @@
 .ds Ba \f[R]|\f[]
 .ds Am &
 .
+.nr gX 0
+.
 .
 .\" NS doc-header-string global string
 .\" NS   the final string used for the manual page header
@@ -201,8 +203,12 @@
 .  wh 0 doc-header
 .  wh -1.25i doc-footer
 .
+.  if \n[gX] \
+.    ds doc-command-name
+.
 .  br
 .
+.  nr gX 0
 .  e@ doc-end-macro
 ..
 .
@@ -697,7 +697,6 @@
 .ds doc-str-Lb-libmagic    Magic Number Recognition Library (libmagic, \-lmagic)
 .ds doc-str-Lb-libmenu     Curses Menu Library (libmenu, \-lmenu)
 .ds doc-str-Lb-libossaudio OSS Audio Emulation Library (libossaudio, \-lossaudio)
-.ds doc-str-Lb-libpam      Pluggable Authentication Module Library (libpam, \-lpam)
 .ds doc-str-Lb-libpcap     Packet Capture Library (libpcap, \-lpcap)
 .ds doc-str-Lb-libpci      PCI Bus Access Library (libpci, \-lpci)
 .ds doc-str-Lb-libpmc      Performance Counters Library (libpmc, \-lpmc)
@@ -2179,21 +2179,10 @@
 .      doc-parse-args \$@
 .    \}
 .    el \{\
-.      ie \n[doc-space-mode] \{\
-.        ds doc-saved-space "\*[doc-space]
-.        ds doc-space
+.      ie \n[doc-space-mode] \
 .        nr doc-space-mode 0
-.      \}
-.      el \{\
-.        ds doc-space "\*[doc-saved-space]
+.      el \
 .        nr doc-space-mode 1
-.
-.        \" finish line only if it is interrupted and `doc-have-space'
-.        \" isn't set
-.        if \n[doc-reg-Sm] \
-.          if \n[.int] \
-.            nop \)
-.      \}
 .  \}\}
 .
 .  if !\n[doc-arg-limit] \
@@ -2218,15 +2207,10 @@
 .    el \{\
 .      \" no argument for Sm
 .      nr doc-arg-ptr -1
-.      ie \n[doc-space-mode] \{\
-.        ds doc-saved-space "\*[doc-space]
-.        ds doc-space
+.      ie \n[doc-space-mode] \
 .        nr doc-space-mode 0
-.      \}
-.      el \{\
-.        ds doc-space "\*[doc-saved-space]
+.      el \
 .        nr doc-space-mode 1
-.      \}
 .  \}\}
 .
 .  ie \n[doc-space-mode] \{\
@@ -2253,13 +2237,18 @@
 .  \}
 .
 .  \" do we have parameters to print?
-.  ie (\n[doc-arg-limit] > \n[doc-arg-ptr]) \{\
+.  ie (\n[doc-arg-limit] <= \n[doc-arg-ptr]) \{\
+.    \" ignore `.Sm on' and `.Sm off' without additional parameters
+.    ie (\n[doc-arg-ptr] > 1) \
+.      doc-print-and-reset
+.    el \
+.      doc-reset-args
+.  \}
+.  el \{\
 .    \" skip `Sm' argument
 .    nr doc-arg-ptr +1
 .    doc-print-recursive
 .  \}
-.  el \
-.    doc-reset-args
 ..
 .
 .
@@ -2512,9 +2501,7 @@
 .    nop \)\s[\n[doc-fontmode-size-stack\n[doc-fontmode-depth]]u]\c
 .
 .    nr doc-fontmode-font-stack\n[doc-fontmode-depth] 0
-.    nr doc-curr-font \n[.f]
 .    nr doc-fontmode-size-stack\n[doc-fontmode-depth] 0
-.    nr doc-curr-size \n[.ps]
 .    nr doc-fontmode-depth -1
 .  \}
 .  el \
@@ -5157,10 +5144,6 @@
 .  ie \n[.$] \
 .    tm Usage: .Re (does not take arguments) (#\n[.c])
 .  el \{\
-.    if !\n[doc-is-reference] \{\
-.      tm mdoc warning: Extraneous .Re (#\n[.c])
-.      return
-.    \}
 .    doc-print-reference
 .    doc-reset-reference
 .    nr doc-is-reference 0
@@ -5239,7 +5222,7 @@
 .\" NS   doc-reference-count
 .
 .de doc-finish-reference
-.  nr doc-reference-count -\$1
+.  nr doc-reference-count -1
 .  ie \n[doc-reference-count] \
 .    nop \),
 .  el \
@@ -5269,81 +5252,81 @@
 .    chop doc-reference-title-name-for-book
 .    ie ((\n[doc-journal-count] == 1) : (\n[doc-book-count] == 1)) \{\
 .      nop \)\*[q]\)\*[doc-reference-title-name-for-book]\)\*[q]\c
-.      doc-finish-reference \n[doc-reference-title-count]
+.      doc-finish-reference
 .    \}
 .    el \{\
 .      nop \*[doc-reference-title-name]\c
-.      doc-finish-reference \n[doc-reference-title-count]
+.      doc-finish-reference
 .  \}\}
 .
 .  if \n[doc-book-count] \{\
 .    unformat doc-book-name
 .    chop doc-book-name
 .    nop \*[doc-book-name]\c
-.    doc-finish-reference \n[doc-book-count]
+.    doc-finish-reference
 .  \}
 .
 .  if \n[doc-publisher-count] \{\
 .    unformat doc-publisher-name
 .    chop doc-publisher-name
 .    nop \*[doc-publisher-name]\c
-.    doc-finish-reference \n[doc-publisher-count]
+.    doc-finish-reference
 .  \}
 .
 .  if \n[doc-journal-count] \{\
 .    unformat doc-journal-name
 .    chop doc-journal-name
 .    nop \*[doc-journal-name]\c
-.    doc-finish-reference \n[doc-journal-count]
+.    doc-finish-reference
 .  \}
 .
 .  if \n[doc-report-count] \{\
 .    unformat doc-report-name
 .    chop doc-report-name
 .    nop \*[doc-report-name]\c
-.    doc-finish-reference \n[doc-report-count]
+.    doc-finish-reference
 .  \}
 .
 .  if \n[doc-issue-count] \{\
 .    unformat doc-issue-name
 .    chop doc-issue-name
 .    nop \*[doc-issue-name]\c
-.    doc-finish-reference \n[doc-issue-count]
+.    doc-finish-reference
 .  \}
 .
 .  if \n[doc-volume-count] \{\
 .    unformat doc-volume-name
 .    chop doc-volume-name
 .    nop \*[doc-volume-name]\c
-.    doc-finish-reference \n[doc-volume-count]
+.    doc-finish-reference
 .  \}
 .
 .  if \n[doc-page-number-count] \{\
 .    unformat doc-page-number-string
 .    chop doc-page-number-string
 .    nop \*[doc-page-number-string]\c
-.    doc-finish-reference \n[doc-page-number-count]
+.    doc-finish-reference
 .  \}
 .
 .  if \n[doc-corporate-count] \{\
 .    unformat doc-corporate-name
 .    chop doc-corporate-name
 .    nop \*[doc-corporate-name]\c
-.    doc-finish-reference \n[doc-corporate-count]
+.    doc-finish-reference
 .  \}
 .
 .  if \n[doc-date-count] \{\
 .    unformat doc-date
 .    chop doc-date
 .    nop \*[doc-date]\c
-.    doc-finish-reference \n[doc-date-count]
+.    doc-finish-reference
 .  \}
 .
 .  if \n[doc-optional-count] \{\
 .    unformat doc-optional-string
 .    chop doc-optional-string
 .    nop \*[doc-optional-string]\c
-.    doc-finish-reference \n[doc-optional-count]
+.    doc-finish-reference
 .  \}
 .
 .  if \n[doc-reference-count] \
@@ -6173,7 +6156,7 @@
 .    \}\}\}
 .    el \{\
 .      tm1 "Usage: .An {-nosplit | -split}
-.      tm1 "       .An author_name ... (#\n[.c])
+.      tm1         .An author_name ... (#\n[.c])
 .  \}\}
 .
 .  if \n[doc-in-authors-section] \{\
@@ -1677,6 +1677,8 @@ and their results are:
 .Lb libcurses
 .It Li libedit
 .Lb libedit
+.It Li libedit
+.Lb libedit
 .It Li libevent
 .Lb libevent
 .It Li libform
@@ -1699,8 +1701,6 @@ and their results are:
 .Lb libmenu
 .It Li libossaudio
 .Lb libossaudio
-.It Li libpam
-.Lb libpam
 .It Li libpcap
 .Lb libpcap
 .It Li libpci
@@ -118,18 +118,11 @@ int main FUNCTION((argc, argv), int argc AND char *argv[])
  struct opie opie;
  int rval, n = 499, i, mode = MODE_DEFAULT, force = 0;
  char seed[OPIE_SEED_MAX+1];
-  char *username;
-  uid_t ruid;
  struct passwd *pp;

  memset(seed, 0, sizeof(seed));

-  ruid = getuid();
-  username = getlogin();
-  pp = getpwnam(username);
-  if (username == NULL || pp == NULL || pp->pw_uid != ruid)
-    pp = getpwuid(ruid);
-  if (pp == NULL) {
+  if (!(pp = getpwnam(getlogin()))) {
    fprintf(stderr, "Who are you?");
    return 1;
  }
@@ -1,4 +1,4 @@
-# $Id: CACerts,v 8.3 2007/06/11 22:04:46 ca Exp $
+# $Id: CACerts,v 8.1 2004/03/01 22:05:47 ca Exp $
 # This file contains some CA certificates that are used to sign the
 # certificates of mail servers of members of the sendmail consortium
 # who may reply to questions etc sent to sendmail.org.
@@ -73,6 +73,73 @@ iTMZxC4pWjmnDueb0kzHuX1qPrQAg4bTFij9rVVlYE4UAkbT
 -----END CERTIFICATE-----


+Certificate:
+    Data:
+        Version: 3 (0x2)
+        Serial Number: 0 (0x0)
+        Signature Algorithm: md5WithRSAEncryption
+        Issuer: C=US, ST=California, L=Emeryville, O=gshapiro.net, CN=Certificate Authority/[email protected]
+        Validity
+            Not Before: Jan  1 04:39:54 2002 GMT
+            Not After : Dec 31 04:39:54 2006 GMT
+        Subject: C=US, ST=California, L=Emeryville, O=gshapiro.net, CN=Certificate Authority/[email protected]
+        Subject Public Key Info:
+            Public Key Algorithm: rsaEncryption
+            RSA Public Key: (1024 bit)
+                Modulus (1024 bit):
+                    00:aa:dd:a2:fe:3b:fa:2f:5c:3d:f1:e1:d4:1d:55:
+                    04:27:6b:01:62:00:d7:02:cb:74:47:69:84:d7:c6:
+                    c5:71:55:79:35:3a:a8:ce:de:48:23:53:80:3c:cd:
+                    54:2e:e9:fe:b1:76:5a:be:cb:fd:2d:dc:a3:36:c5:
+                    c7:1e:4e:ef:76:f0:55:8f:a0:a5:f8:07:c5:52:1d:
+                    a2:42:81:4d:8a:c8:42:3f:f3:01:80:f9:46:35:a6:
+                    bc:c0:9b:9f:33:8b:49:9b:1d:87:8f:19:48:15:21:
+                    23:57:df:6e:4d:03:ed:ae:9f:0b:91:b7:a9:47:66:
+                    f1:0d:1b:1c:5d:b4:57:60:c7
+                Exponent: 65537 (0x10001)
+        X509v3 extensions:
+            X509v3 Subject Key Identifier: 
+            A0:6D:E0:06:AF:61:94:B4:C6:84:15:B4:8B:74:22:67:4A:43:60:CA
+            X509v3 Authority Key Identifier: 
+            keyid:A0:6D:E0:06:AF:61:94:B4:C6:84:15:B4:8B:74:22:67:4A:43:60:CA
+            DirName:/C=US/ST=California/L=Emeryville/O=gshapiro.net/CN=Certificate Authority/[email protected]
+            serial:00
+
+            X509v3 Basic Constraints: 
+            CA:TRUE
+    Signature Algorithm: md5WithRSAEncryption
+        87:27:d2:2a:3a:dc:04:cd:ef:e8:7b:1c:34:47:2e:13:34:a5:
+        08:f9:4d:df:d8:e1:6d:e6:9a:db:38:ee:20:6d:4a:ae:6f:1e:
+        bc:71:61:a4:b4:d6:40:24:ee:65:ca:e9:81:5a:ef:ee:62:57:
+        70:05:46:91:6b:d0:c6:a6:e9:38:65:ae:ea:50:b3:5c:27:c4:
+        7a:bd:95:8c:cb:45:ef:fc:fc:99:e5:6a:61:c3:44:77:d8:1f:
+        d6:b4:17:44:15:9a:bc:26:5b:ec:4e:29:5d:fd:cf:61:f3:be:
+        91:a4:3b:51:e6:73:5b:17:82:9d:5a:56:2c:63:c2:f1:d6:a2:
+        4c:5a
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
 Certificate:
    Data:
        Version: 3 (0x2)
@@ -143,94 +210,93 @@ xBJlUbs98fcltM0L9lt6YSWtBgoBVdxxBSkNc+kwUb7T4bKJ/A8o9wZ1lhs0deAH
 Certificate:
    Data:
        Version: 3 (0x2)
-        Serial Number:
-            fa:7c:2c:80:29:3f:c2:64
+        Serial Number: 0 (0x0)
        Signature Algorithm: md5WithRSAEncryption
-        Issuer: C=US, ST=California, L=Berkeley, O=Endmail Org, OU=MTA, CN=Claus Assmann CA RSA 2007/emailAddress=ca+ca-rsa2007@esmtp.org
+        Issuer: C=US, ST=California, L=Berkeley, O=Endmail Org, OU=MTA, CN=Claus Assmann CA RSA 2003/emailAddress=ca+ca-rsa2003@esmtp.org
        Validity
-            Not Before: May  4 02:07:56 2007 GMT
-            Not After : May  3 02:07:56 2010 GMT
-        Subject: C=US, ST=California, L=Berkeley, O=Endmail Org, OU=MTA, CN=Claus Assmann CA RSA 2007/emailAddress=ca+ca-rsa2007@esmtp.org
+            Not Before: Aug  7 15:56:45 2003 GMT
+            Not After : Aug  6 15:56:45 2006 GMT
+        Subject: C=US, ST=California, L=Berkeley, O=Endmail Org, OU=MTA, CN=Claus Assmann CA RSA 2003/emailAddress=ca+ca-rsa2003@esmtp.org
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
            RSA Public Key: (2048 bit)
                Modulus (2048 bit):
-                    00:b0:28:91:31:af:82:ce:72:ef:36:ab:7d:e9:b1:
-                    f5:77:66:38:4b:38:1f:5f:3d:12:d3:c8:fd:9a:f4:
-                    d4:f6:b8:90:f9:26:5f:29:f7:43:f9:34:ec:65:62:
-                    01:bb:64:f1:5d:ea:75:04:3d:92:65:60:a2:06:62:
-                    fa:88:ca:d8:20:50:c8:1e:38:53:b5:18:dd:b7:bd:
-                    c7:08:35:4c:d9:dc:c6:97:56:37:b6:65:33:74:5a:
-                    b2:c3:85:08:2b:b7:26:70:ff:38:02:1a:67:6a:d0:
-                    49:18:10:4b:f8:db:af:06:9c:b1:a8:82:a1:b1:75:
-                    d2:52:9b:53:0c:ca:a7:e3:15:38:79:6d:a1:f5:ef:
-                    7c:8b:fd:bd:04:78:f9:e8:1e:b9:92:ea:74:d7:45:
-                    1e:4c:c8:bd:f4:5c:fc:1a:7f:e7:31:c6:ab:cb:78:
-                    c7:4d:2f:b5:72:10:35:27:4a:1a:fa:53:19:f8:a7:
-                    59:63:eb:e9:15:ab:dc:71:69:8c:42:1c:96:4e:89:
-                    80:66:c9:9e:21:d5:3d:08:19:74:a5:f5:07:a0:ae:
-                    de:79:af:fd:42:c2:79:7e:8c:f8:39:22:3b:c3:c4:
-                    58:3b:d0:0d:e6:a9:11:b6:a2:cd:2e:e5:16:66:fd:
-                    7e:65:33:94:b0:36:80:27:f5:80:76:a9:e5:df:f2:
-                    cf:ef
+                    00:aa:37:0f:09:a9:1c:e3:1a:0c:fe:bd:6c:37:a4:
+                    cf:87:db:af:6b:b4:19:d4:11:db:c6:56:ca:39:80:
+                    c6:a4:38:b0:bc:ac:7e:be:71:30:86:2c:dc:fa:b5:
+                    fd:58:23:a0:c1:ad:11:53:85:ca:fb:e6:d8:7e:28:
+                    eb:84:3b:cd:a3:fa:28:a5:cb:c7:b2:54:99:3e:40:
+                    2a:27:43:4b:0c:26:4b:af:97:3d:92:82:d9:eb:2c:
+                    7f:77:fd:b8:cd:7e:1e:04:81:17:3c:e2:44:68:ce:
+                    88:66:02:90:24:35:24:c4:4c:ad:77:04:1a:3a:d5:
+                    59:28:28:03:da:03:9d:f4:2e:52:6e:b5:36:96:4b:
+                    14:f8:fc:8e:c6:d3:9b:e2:80:90:8b:71:d7:d0:5c:
+                    43:b2:49:f1:5a:26:f3:5d:9e:3b:01:98:db:e3:ed:
+                    5e:8d:dd:cf:aa:68:9d:0b:c9:e2:4e:fc:16:44:72:
+                    93:07:62:18:05:c1:47:81:3c:3d:e4:e4:22:da:2c:
+                    d6:4a:44:52:06:7a:83:b5:e9:52:38:97:2f:75:a6:
+                    5c:6f:87:8a:8d:83:f4:d0:04:a5:34:18:5e:a1:06:
+                    16:b3:54:ce:64:47:ca:70:56:a3:6f:b9:7f:af:91:
+                    76:78:70:b4:ab:ae:8e:d5:22:26:57:b1:ba:e7:4b:
+                    18:21
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Subject Key Identifier: 
-                B2:49:6B:52:45:EE:90:36:D2:79:47:03:33:D9:A0:BA:80:50:DA:1C
+            3A:12:03:DB:0F:9E:28:45:A6:34:8D:38:AB:BA:47:8C:2A:A0:E4:2E
            X509v3 Authority Key Identifier: 
-                keyid:B2:49:6B:52:45:EE:90:36:D2:79:47:03:33:D9:A0:BA:80:50:DA:1C
-                DirName:/C=US/ST=California/L=Berkeley/O=Endmail Org/OU=MTA/CN=Claus Assmann CA RSA 2007/emailAddress=ca+ca-rsa2007@esmtp.org
-                serial:FA:7C:2C:80:29:3F:C2:64
+            keyid:3A:12:03:DB:0F:9E:28:45:A6:34:8D:38:AB:BA:47:8C:2A:A0:E4:2E
+            DirName:/C=US/ST=California/L=Berkeley/O=Endmail Org/OU=MTA/CN=Claus Assmann CA RSA 2003/emailAddress=ca+ca-rsa2003@esmtp.org
+            serial:00

            X509v3 Basic Constraints: 
-                CA:TRUE
+            CA:TRUE
            X509v3 Subject Alternative Name: 
-                email:ca+ca-rsa2007@esmtp.org
+            email:ca+ca-rsa2003@esmtp.org
            X509v3 Issuer Alternative Name: 
-                email:ca+ca-rsa2007@esmtp.org
+            email:ca+ca-rsa2003@esmtp.org
    Signature Algorithm: md5WithRSAEncryption
-        98:98:7c:d3:d0:5b:72:47:15:e6:22:68:bb:78:0e:78:66:e9:
-        56:16:d8:bc:9d:5a:dc:27:29:fb:91:2d:6a:21:35:18:56:b4:
-        4f:2a:09:c0:08:6f:9a:59:2b:2e:72:9a:fb:50:ba:c7:a9:91:
-        a0:f9:6c:be:cf:78:42:43:02:70:53:97:ba:6a:e3:da:17:e8:
-        1f:c7:3a:5b:e7:bc:eb:e5:24:4c:f5:cf:61:34:1e:20:ed:17:
-        63:ef:81:d3:9e:25:fe:cc:05:19:cc:8a:82:c9:4c:3a:b5:6b:
-        49:51:76:46:02:aa:60:bb:c4:b9:61:48:33:da:79:8d:46:a3:
-        06:20:98:f3:b2:db:3b:ad:c9:1d:0e:97:3d:b7:14:19:d3:7d:
-        04:8b:6a:81:e0:11:5b:e1:35:a3:ff:2f:11:86:1c:31:85:7a:
-        fd:3f:36:ef:99:25:46:2e:b0:cb:43:45:4a:ec:be:d3:3f:a4:
-        77:9b:79:cc:ce:92:63:a5:d9:ed:db:a0:9d:5d:7c:d7:80:f6:
-        c9:41:fb:02:96:8e:fd:f3:da:05:9d:81:a7:25:da:26:35:3b:
-        a9:0c:8c:f5:a7:5d:48:ec:87:c7:7a:60:51:76:f2:de:9b:14:
-        2b:55:8a:43:df:99:19:f3:eb:e7:03:e6:a7:a2:a2:28:dd:d5:
-        07:6a:3f:f7
+        96:83:b6:54:93:df:38:d0:48:a7:a1:c8:08:c9:0f:e9:80:05:
+        e3:7e:c3:61:51:88:7b:7a:bb:24:b0:69:a3:22:e4:98:38:da:
+        c8:c3:eb:52:70:63:e2:66:f2:59:ef:56:be:aa:7c:87:6e:94:
+        85:d4:71:ba:35:f7:ee:d0:6e:52:1d:1f:e4:fd:2f:e2:70:31:
+        5d:b7:8b:13:cc:70:10:21:fa:34:29:8f:8d:d8:4a:c7:0f:b2:
+        36:e7:1e:1e:46:d1:11:84:80:7c:bb:24:c4:63:be:2a:24:53:
+        74:0c:89:e0:6a:f4:08:63:bf:54:d3:0a:d9:fc:fe:6c:de:4f:
+        97:61:08:a0:10:92:eb:af:06:ec:50:86:c4:cc:6b:31:32:60:
+        25:7a:09:47:f8:42:7a:a2:d5:90:fa:48:be:bf:0a:e1:03:b8:
+        56:24:b9:12:e9:ba:09:30:47:be:a5:8e:a2:92:a4:dc:a6:a7:
+        c6:29:39:65:6e:64:4a:1b:b2:c3:07:29:f5:c0:7e:78:e0:22:
+        9b:98:d4:87:91:ca:e1:66:9d:2f:70:f1:4c:a5:8e:2e:68:52:
+        b3:bd:95:76:56:40:0e:46:47:e4:b3:ec:aa:3c:e8:86:96:5a:
+        ed:fa:c9:10:95:53:04:13:71:01:91:ce:cd:3a:51:c6:30:e9:
+        48:49:64:a3
 -----BEGIN CERTIFICATE-----
-MIIFJzCCBA+gAwIBAgIJAPp8LIApP8JkMA0GCSqGSIb3DQEBBAUAMIGlMQswCQYD
+MIIFFzCCA/+gAwIBAgIBADANBgkqhkiG9w0BAQQFADCBpTELMAkGA1UEBhMCVVMx
+EzARBgNVBAgTCkNhbGlmb3JuaWExETAPBgNVBAcTCEJlcmtlbGV5MRQwEgYDVQQK
+EwtFbmRtYWlsIE9yZzEMMAoGA1UECxMDTVRBMSIwIAYDVQQDExlDbGF1cyBBc3Nt
+YW5uIENBIFJTQSAyMDAzMSYwJAYJKoZIhvcNAQkBFhdjYStjYS1yc2EyMDAzQGVz
+bXRwLm9yZzAeFw0wMzA4MDcxNTU2NDVaFw0wNjA4MDYxNTU2NDVaMIGlMQswCQYD
 VQQGEwJVUzETMBEGA1UECBMKQ2FsaWZvcm5pYTERMA8GA1UEBxMIQmVya2VsZXkx
 FDASBgNVBAoTC0VuZG1haWwgT3JnMQwwCgYDVQQLEwNNVEExIjAgBgNVBAMTGUNs
-YXVzIEFzc21hbm4gQ0EgUlNBIDIwMDcxJjAkBgkqhkiG9w0BCQEWF2NhK2NhLXJz
-YTIwMDdAZXNtdHAub3JnMB4XDTA3MDUwNDAyMDc1NloXDTEwMDUwMzAyMDc1Nlow
-gaUxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpDYWxpZm9ybmlhMREwDwYDVQQHEwhC
-ZXJrZWxleTEUMBIGA1UEChMLRW5kbWFpbCBPcmcxDDAKBgNVBAsTA01UQTEiMCAG
-A1UEAxMZQ2xhdXMgQXNzbWFubiBDQSBSU0EgMjAwNzEmMCQGCSqGSIb3DQEJARYX
-Y2ErY2EtcnNhMjAwN0Blc210cC5vcmcwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAw
-ggEKAoIBAQCwKJExr4LOcu82q33psfV3ZjhLOB9fPRLTyP2a9NT2uJD5Jl8p90P5
-NOxlYgG7ZPFd6nUEPZJlYKIGYvqIytggUMgeOFO1GN23vccINUzZ3MaXVje2ZTN0
-WrLDhQgrtyZw/zgCGmdq0EkYEEv4268GnLGogqGxddJSm1MMyqfjFTh5baH173yL
-/b0EePnoHrmS6nTXRR5MyL30XPwaf+cxxqvLeMdNL7VyEDUnShr6Uxn4p1lj6+kV
-q9xxaYxCHJZOiYBmyZ4h1T0IGXSl9Qegrt55r/1Cwnl+jPg5IjvDxFg70A3mqRG2
-os0u5RZm/X5lM5SwNoAn9YB2qeXf8s/vAgMBAAGjggFWMIIBUjAdBgNVHQ4EFgQU
-sklrUkXukDbSeUcDM9mguoBQ2hwwgdoGA1UdIwSB0jCBz4AUsklrUkXukDbSeUcD
-M9mguoBQ2hyhgaukgagwgaUxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpDYWxpZm9y
-bmlhMREwDwYDVQQHEwhCZXJrZWxleTEUMBIGA1UEChMLRW5kbWFpbCBPcmcxDDAK
-BgNVBAsTA01UQTEiMCAGA1UEAxMZQ2xhdXMgQXNzbWFubiBDQSBSU0EgMjAwNzEm
-MCQGCSqGSIb3DQEJARYXY2ErY2EtcnNhMjAwN0Blc210cC5vcmeCCQD6fCyAKT/C
-ZDAMBgNVHRMEBTADAQH/MCIGA1UdEQQbMBmBF2NhK2NhLXJzYTIwMDdAZXNtdHAu
-b3JnMCIGA1UdEgQbMBmBF2NhK2NhLXJzYTIwMDdAZXNtdHAub3JnMA0GCSqGSIb3
-DQEBBAUAA4IBAQCYmHzT0FtyRxXmImi7eA54ZulWFti8nVrcJyn7kS1qITUYVrRP
-KgnACG+aWSsucpr7ULrHqZGg+Wy+z3hCQwJwU5e6auPaF+gfxzpb57zr5SRM9c9h
-NB4g7Rdj74HTniX+zAUZzIqCyUw6tWtJUXZGAqpgu8S5YUgz2nmNRqMGIJjzsts7
-rckdDpc9txQZ030Ei2qB4BFb4TWj/y8RhhwxhXr9PzbvmSVGLrDLQ0VK7L7TP6R3
-m3nMzpJjpdnt26CdXXzXgPbJQfsClo7989oFnYGnJdomNTupDIz1p11I7IfHemBR
-dvLemxQrVYpD35kZ8+vnA+anoqIo3dUHaj/3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 -----END CERTIFICATE-----
@@ -1,6 +1,6 @@
 $FreeBSD$

-sendmail 8.14.2
+sendmail 8.13.1
 	originals can be found at: ftp://ftp.sendmail.org/pub/sendmail/

 For the import of sendmail, the following files were removed:
@@ -21,13 +21,9 @@ The following directories were renamed:

 Imported using:

-	cvs import -m 'Import sendmail 8.14.2' \
-		src/contrib/sendmail SENDMAIL v8_14_2
+	cvs import -m 'Import sendmail 8.13.1' \
+		src/contrib/sendmail SENDMAIL v8_13_1

-After importing, bump the version of src/etc/sendmail/freebsd*mc
-so mergemaster will merge /etc/mail/freebsd*cf:
-
-	cvs commit -f src/etc/sendmail/freebsd*mc

 To make local changes to sendmail, simply patch and commit to the main
 branch (aka HEAD).  Never make local changes on the vendor (SENDMAIL)
@@ -97,4 +93,4 @@ infrastructure in FreeBSD:
 	usr.sbin/mailwrapper/Makefile

 [email protected]
-11-November-2007
+31-July-2004
@@ -12,13 +12,13 @@ sendmail/SECURITY for more installation information.
 2. Create any necessary site configuration build files, as noted in
   devtools/Site/README.

-3. In the sendmail/ directory, run "sh ./Build" (see sendmail/README for
+3. In the sendmail/ directory, run "sh Build" (see sendmail/README for
   details).

 4. Change to the cf/cf/ directory (that's not a typo): Copy whichever .mc
   file best matches your environment to sendmail.mc.  Next, tailor it
   as explained in cf/README.  Then run
-   "sh ./Build sendmail.cf".
+   "sh Build sendmail.cf".

 5. Back up your current /etc/mail/sendmail.cf and the sendmail binary (whose
   location varies from operating system to operating system, but is usually
@@ -26,21 +26,21 @@ sendmail/SECURITY for more installation information.

 6. Install sendmail.cf as /etc/mail/sendmail.cf and submit.cf as
   /etc/mail/submit.cf.  This can be done in the cf/cf by using
-   "sh ./Build install-cf".
+   "sh Build install-cf".

   Please read sendmail/SECURITY before continuing; you have to create a
   new user smmsp and a new group smmsp for the default installation.
   Then install the sendmail binary built in step 3 by cd-ing back to
-   sendmail/ and running "sh ./Build install".
+   sendmail/ and running "sh Build install".

 7. For each of the associated sendmail utilities (makemap, mailstats,
   etc.), read the README in the utility's directory if it exists.  When
-   you are ready to install it, back up your installed version and type
-   "sh ./Build install".
+   you are ready to install it, back up your installed version and type "sh
+   Build install".

 8. If you are upgrading from an older version of sendmail and are using any
   database maps, be sure to rebuild them with the new version of makemap,
   in case you are now using a different (and thereby incompatible) version
   of Berkeley DB.

-$Revision: 8.16 $, Last updated $Date: 2007/10/03 21:00:28 $
+$Revision: 8.15 $, Last updated $Date: 2002/05/28 18:09:25 $
@@ -29,10 +29,10 @@ This list is not guaranteed to be complete.
 * Null bytes are not handled properly in headers.

  Sendmail should handle full binary data.  As it stands, it handles
-  all values in the body, but not 0x00 in the header.  Changing
-  this would require a major restructuring of the code -- for
-  example, almost no C library support could be used to handle
-  strings.
+  all values in the body, but only 0x01-0x80 and 0xA0-0xFF in
+  the header.  Notably missing is 0x00, which would require a major
+  restructuring of the code -- for example, almost no C library support
+  could be used to handle strings.

 * Header checks are not called if header value is too long or empty.

@@ -41,12 +41,6 @@ This list is not guaranteed to be complete.
  characters then no header check is done even if one is configured for
  the header.

-* Header lines which are too long will be split incorrectly.
-
-  Header lines which are longer than 2045 characters will be split
-  but some characters might be lost.  Fix: obey RFC (2)822 and do not
-  send lines that are longer than 1000 characters.
-
 * Sender addresses whose domain part cause a temporary A record lookup
  failure but have a valid MX record will be temporarily rejected in
  the default configuration.  Solution: fix the DNS at the sender side.
@@ -170,7 +164,7 @@ Kresolve sequence dnsmx canon

  When sendmail is doing 8->7 bit MIME conversions, and the message
  contains certain MIME body types that cannot be converted to 7-bit,
-  sendmail will pass the message as 8-bit.
+  sendmail will strip the message to 7-bit.

 * 7->8 bit MIME conversion

@@ -235,9 +229,9 @@ Kresolve sequence dnsmx canon

  Sendmail will deliver to a fail if the file is owned by the DefaultUser
  or has the set-user-ID bit set.  Unfortunately, some systems clear that bit
-  when a file is modified.  Sendmail compensates by resetting the file mode
+  when a file is modified.  Sendmail compensates by resetting the file mode 
  back to it's original settings.  Unfortunately, there's still a
-  permission failure race as sendmail checks the permissions before locking
+  permission failure race as sendmail checks the permissions before locking 
  the file.  This is unavoidable as sendmail must verify the file is safe
  to open before opening it.  A file can not be locked until it is open.

@@ -247,4 +241,4 @@ Kresolve sequence dnsmx canon
  be used if set instead of LOCAL_RELAY ($R).  This will be fixed in a
  future version.

-$Revision: 8.59 $, Last updated $Date: 2007/02/21 23:13:58 $
+$Revision: 8.56 $, Last updated $Date: 2002/12/18 22:39:06 $
@@ -3,18 +3,17 @@

 This directory has the latest sendmail(TM) software from Sendmail, Inc.

-Report any bugs to sendmail-bugs-YYYY@support.sendmail.org
-where YYYY is the current year, e.g., 2005.
+Report any bugs to sendmail-bugs@sendmail.ORG

-There is a web site at http://www.sendmail.org/ -- see that site for
+There is a web site at http://WWW.Sendmail.ORG/ -- see that site for
 the latest updates.

 +--------------+
 | INTRODUCTION |
 +--------------+

-0. The vast majority of queries about sendmail are answered in the
-   README files noted below.
+0. The vast majority of queries to <sendmail[email protected]>
+   are answered in the README files noted below.

 1. Read this README file, especially this introduction, and the DIRECTORY
   PERMISSIONS sections.
@@ -464,4 +463,4 @@ sendmail	Source for the sendmail program itself.
 test		Some test scripts (currently only for compilation aids).
 vacation	Source for the vacation program.  NOT PART OF SENDMAIL!

-$Revision: 8.93 $, Last updated $Date: 2005/09/16 20:08:50 $
+$Revision: 8.91 $, Last updated $Date: 2002/11/09 23:33:07 $
@@ -1,642 +1,11 @@
 			SENDMAIL RELEASE NOTES
-      $Id: RELEASE_NOTES,v 8.1909 2007/10/31 16:04:13 ca Exp $
+      $Id: RELEASE_NOTES,v 8.1679 2004/07/30 18:03:07 ca Exp $


 This listing shows the version of the sendmail binary, the version
 of the sendmail configuration files, the date of release, and a
 summary of the changes in that release.

-8.14.2/8.14.2	2007/11/01
-	If a message was queued and it contained 8 bit characters in
-		a From: or To: header, then those characters could be
-		"mistaken" for internal control characters during a queue
-		run and trigger various consistency checks.  Problem
-		noted by Neil Rickert of Northern Illinois University.
-	If MaxMimeHeaderLength is set to a value greater than 0 (which
-		it is by default) then even if the Linelimit parameter
-		is 0, sendmail corrupted in the non-transfer-encoding
-		case every MAXLINE-1 characters.  Patch from John Gardiner
-		Myers of Proofpoint.
-	Setting the suboption DeliveryMode for DaemonPortOptions did not
-		work in earlier 8.14 versions.
-	Note: DeliveryMode=interactive is silently converted to
-		background if a milter can reject or delete a recipient.
-		Prior to 8.14 this happened only if milter could delete
-		recipients.
-	ClientRate should trigger when the limit was exceeded (as
-		documented), not when it was reached.  Patch from 
-		John Beck of Sun Microsystems.
-	Force a queue run for -qGqueuegroup even if no runners are
-		specified (R=0) and forking (F=f) is requested.
-	When multiple results are requested for a DNS map lookup
-		(-z and -Z), return only those that are relevant for
-		the query (not also those in the "additional section".)
-	If the message transfer time to sendmail (when acting as server)
-		exceeds Timeout.queuewarn or Timeout.queuereturn and
-		the message is refused (by a milter), sendmail previously
-		created a delivery status notification (DSN).  Patch
-		from Doug Heath of The Hertz Corporation.
-	A code change in Cyrus-SASL 2.1.22 for sasl_decode64() requires
-		the MTA to deal with some input (i.e., "=") itself.
-		Problem noted by Eliot Lear.
-	sendmail counted a delivery as successful if PIPELINING is
-		compiled in but not offered by the server and the
-		delivery failed temporarily.  Patch from Werner Wiethege.
-	If getting the result of an LDAP query times out then close the
-		map so it will be reopened on the next lookup.  This
-		should help "failover" configurations that specify more
-		than one LDAP server.
-	If check_compat returns $#discard then a "savemail panic" could
-		be triggered under some circumstances (e.g., requiring
-		a system which does not have the compile time flag
-		HASFLOCK set). Based on patch by Motonori Nakamura
-		of National Institute of Informatics, Japan.
-	If a milter rejected a recipient, the count for nrcpts= in the
-		logfile entry might have been wrong.  Problem found by
-		Petra Humann of TU Dresden.
-	If a milter invoked smfi_chgfrom() where ESMTP arguments are not
-		NULL, the message body was lost.  Patch from Motonori
-		Nakamura of National Institute of Informatics, Japan.
-	sendmail(8) had a bogus space in -qGname.  Patch from Peng Haitao.
-	CONTRIB: buildvirtuser: Preserve ownership and permissions when
-		replacing files.
-	CONTRIB: buildvirtuser: Skip dot-files (e.g., .cvsignore) when
-		reading the /etc/mail/virtusers/ directory.
-	CONTRIB: buildvirtuser: Emit warnings instead of exiting where
-		appropriate.
-	LIBMILTER: Fix ABI backwards compatibility so milters compiled
-		against an older libmilter.so shared library can use an
-		8.14 libmilter.so shared library.
-	LIBMILTER: smfi_version() did not properly extract the patchlevel
-		from the version number, however, the returned value was
-		correct for the current libmilter version.
-
-8.14.1/8.14.1	2007/04/03
-	Even though a milter rejects a recipient the MTA will still keep
-		it in its list of recipients and deliver to it if the
-		transaction is accepted. This is a regression introduced
-		in 8.14.0 due to the change for SMFIP_RCPT_REJ.  Bug
-		found by Andy Fiddaman.
-	The new DaemonPortOptions which begin with a lower case character
-		could not be set in 8.14.0.
-	If a server shut down the connection in response to a STARTTLS
-		command, sendmail would log a misleading error message
-		due to an internal inconsistency.  Problem found by
-		Werner Wiethege.
-	Document how some sendmail.cf options change the behavior of mailq.
-		Noted by Paul Menchini of the North Carolina School of
-		Science and Mathematics.
-	CONFIG: Add confSOFT_BOUNCE m4 option for setting SoftBounce.
-	CONFIG: 8.14.0's RELEASE_NOTES failed to mention the addition
-		of the confMAX_NOOP_COMMANDS and confSHARED_MEMORY_KEY_FILE
-		m4 options for setting MaxNOOPCommands and
-		SharedMemoryKeyFile.
-	CONFIG: Add confMILTER_MACROS_EOH and confMILTER_MACROS_DATA m4
-		options for setting Milter.macros.eoh and Milter.macros.data.
-	CONTRIB: Use flock() and fcntl() in qtool.pl if necessary.
-		Patch from Daniel Carroll of Mesa State College.
-	LIBMILTER: Make sure an unknown command does not affect the
-		currently available macros.  Problem found by Andy Fiddaman.
-	LIBMILTER: The MTA did not offer SMFIF_SETSYMLIST during option
-		negotiation.  Problem reported by Bryan Costales.
-	LIBMILTER: Fix several minor errors in the documentation.
-		Patches from Bryan Costales.
-	PORTABILITY FIXES:
-		AIX 5.{1,2}: libsm/util.c failed to compile due to
-			redefinition of several macros, e.g., SIG_ERR.
-			Patch from Jim Pirzyk with assistance by Bob
-			Booth, University of Illinois at Urbana-Champaign.
-		Add support for QNX.6.  Patch from Sean Boudreau of QNX
-			Software Systems.
-	New Files:
-		devtools/M4/depend/QNX6.m4
-		devtools/OS/QNX.6.x
-		include/sm/os/sm_os_qnx.h
-
-	New Files added in 8.14.0, but not shown in the release notes entry:
-		libmilter/docs/smfi_chgfrom.html
-		libmilter/docs/smfi_version.html
-
-8.14.0/8.14.0	2007/01/31
-	Header field values are now 8 bit clean.  Notes:
-		- header field names are still restricted to 7 bit.
-		- RFC 2822 allows only 7 bit (US-ASCII) characters in
-		  headers.
-	Preserve spaces after the colon in a header.  Previously, any
-		number of spaces after the colon would be changed to
-		exactly one space.
-	In some cases of deeply nested aliases/forwarding, mail can
-		be silently lost.  Moreover, the MaxAliasRecursion
-		limit may be reached too early, e.g., the counter
-		may be off by a factor of 4 in case of a sequence of
-		.forward files that refer to others.  Patch from
-		Motonori Nakamura of Kyoto University.
-	Fix a regression in 8.13.8: if InputMailFilters is set then
-		"sendmail -bs" can trigger an assertion because the
-		hostname of the client is undefined.  It is now set
-		to "localhost" for the xxfi_connect() callback.
-	Avoid referencing a freed variable during cleanup when terminating.
-		Problem reported and diagnosed by Joe Maimon.
-	New option HeloName to set the name for the HELO/EHLO command.
-		Patch from Nik Clayton.
-	New option SoftBounce to issue temporary errors (4xy) instead of
-		permanent errors (5xy).  This can be useful for testing.
-	New suboptions for DaemonPortOptions to set them individually
-		per daemon socket:
-			DeliveryMode	DeliveryMode
-			refuseLA	RefuseLA
-			delayLA		DelayLA
-			queueLA		QueueLA
-			children	MaxDaemonChildren
-	New option -K for LDAP maps to replace %1 through %9 in the
-		lookup key with the LDAP escaped contents of the
-		arguments specified in the map lookup.  Loosely based
-		on patch from Wolfgang Hottgenroth.
-	Log the time after which a greet_pause delay triggered.  Patch
-		from Nik Clayton.
-	If a client is rejected via TCP wrapper or some other check
-		performed by validate_connection() (in conf.c) then do
-		not also invoke greet_pause.  Problem noted by Jim Pirzyk
-		of the University of Illinois at Urbana-Champaign.
-	If a client terminates the SMTP connection during a pause
-		introduced by greet_pause, then a misleading message
-		was logged previously.  Problem noted by Vernon Schryver
-		et.al., patch from Matej Vela.
-	New command "mstat" for control socket to provide "machine
-		readable" status.
-	New named config file rule check_eom which is called at the end
-		of a message, its parameter is the size of the message.
-	If the macro {addr_type} indicates that the current address
-		is a header address it also distinguishes between
-		recipient and sender addresses (as it is done for
-		envelope addresses).
-	When a macro is set in check_relay, then its value is accessible
-		by all transactions in the same SMTP session.
-	Increase size of key for ldap lookups to 1024 (MAXKEY).
-	New option MaxNOOPCommands to override default of 20 for the
-		number of "useless" commands before the SMTP server will
-		slow down responding.
-	New option SharedMemoryKeyFile: if shared memory support is
-		enabled, the MTA can be asked to select a shared memory
-		key itself by setting SharedMemoryKey to -1 and specifying
-		a file where to store the selected key.
-	Try to deal with open HTTP proxies that are used to send spam
-		by recognizing some commands from them. If the first command
-		from the client is GET, POST, CONNECT, or USER, then the
-		connection is terminated immediately.
-	New PrivacyOptions noactualrecipient to avoid putting
-		X-Actual-Recipient lines in DSNs revealing the actual
-		account that addresses map to.  Patch from Dan Harkless.
-	New options B, z, and Z for DNS maps:
-		-B: specify a domain that is always appended to queries.
-		-z: specify the delimiter at which to cut off the result of
-			a query if it is too long.
-		-Z: specify the maximum number of entries to be concatenated
-			to form the result of a lookup.
-	New target "check" in the Makefile of libsm: instead of running tests
-		implicitly while building libsm, they must be explicitly
-		started by using "make check".
-	Fixed some inconsistent checks for NULL pointers that have been
-		reported by the SATURN tool which has been developed by
-		Isil Dillig and Thomas Dillig of Stanford University.
-	Fix a potential race condition caused by a signal handler for
-		terminated child processes.  Problem noted by David F. Skoll.
-	When a milter deleted a recipient, that recipient could cause a
-		queue group selection. This has been disabled as it was not
-		intended.
-	New operator 'r' for the arith map to return a random number.
-		Patch from Motonori Nakamura of Kyoto University.
-	New compile time option MILTER_NO_NAGLE to turn off the Nagle
-		algorithm for communication with libmilter ("cork" on Linux),
-		which may improve the communication performance on some
-		operating systems.  Patch from John Gardiner Myers of
-		Proofpoint.
-	If sendmail received input that contained a CR without subsequent LF
-		(thus violating RFC 2821 (2.3.7)), it could previously
-		generate an additional blank line in the output as the last
-		line.
-	Restarting persistent queue runners by sending a HUP signal to
-		the "queue control process" (QCP) works now.
-	Increase the length of an input line to 12288 to deal with
-		really long lines during SMTP AUTH negotiations.
-		Problem noted by Werner Wiethege.
-	If ARPANET mode (-ba) was selected STARTTLS would fail (due to
-		a missing initialization call for that case).  Problem
-		noted by Neil Rickert of Northern Illinois University.
-	If sendmail is linked against a library that initializes Cyrus-SASL
-		before sendmail did it (such as libnss-ldap), then SMTP AUTH
-		could fail for the sendmail client.  A patch by Moritz Both
-		works around the API design flaw of Cyrus-SASLv2.
-	CONFIG: Make it possible to unset the StatusFile option by
-		undefining STATUS_FILE.  By not setting StatusFile,
-		the MTA will not attempt to open a statistics file on
-		each delivery.
-	CONFIG: New FEATURE(`require_rdns') to reject messages from SMTP
-		clients whose IP address does not have proper reverse DNS.
-		Contributed by Neil Rickert of Northern Illinois University
-		and John Beck of Sun Microsystems.
-	CONFIG: New FEATURE(`block_bad_helo') to reject messages from SMTP
-		clients which provide a HELO/EHLO argument which is either
-		unqualified, or is one of our own names (i.e., the server
-		name instead of the client name).  Contributed by Neil
-		Rickert of Northern Illinois University and John Beck of
-		Sun Microsystems.
-	CONFIG: New FEATURE(`badmx') to reject envelope sender addresses
-		(MAIL) whose domain part resolves to a "bad" MX record.
-		Based on contribution from William Dell Wisner.
-	CONFIG: New macros SMTP_MAILER_LL and RELAY_MAILER_LL to override
-		the maximum line length of the smtp mailers.
-	CONFIG: New option `relaytofulladdress' for FEATURE(`access_db')
-		to allow entries in the access map to be of the form
-			To:[email protected]	RELAY
-	CONFIG: New subsuboptions eoh and data to specify the list of
-		macros a milter should receive at those stages in the
-		SMTP dialogue.
-	CONFIG: New option confHELO_NAME for HeloName to set the name
-		for the HELO/EHLO command.
-	CONFIG: dnsbl and enhdnsbl can now also discard or quarantine
-		messages by using those values as second argument.
-		Patches from Nelson Fung.
-	CONTRIB: cidrexpand uses a hash symbol as comment character and
-		ignores everything after it unless it is in quotes or
-		preceeded by a backslash.
-	DEVTOOLS: New macro confMKDIR: if set to a program that creates
-		directories, then it used for "make install" to create
-		the required installation directories.
-	DEVTOOLS: New macro confCCLINK to specify the linker to use for
-		executables (defaults to confCC).
-	LIBMILTER: A new version of the milter API has been created that
-		has several changes which are listed below and documented
-		in the webpages reachable via libmilter/docs/index.html.
-	LIBMILTER: The meaning of the version macro SMFI_VERSION has been
-		changed.  It now refers only to the version of libmilter,
-		not to the protocol version (which is used only internally,
-		it is not user/milter-programmer visible).  Additionally,
-		a version function smfi_version() has been introduced such
-		that a milter program can check the libmilter version also
-		at runtime which is useful if a shared library is used.
-	LIBMILTER: A new callback xxfi_negotiate() can be used to
-		dynamically (i.e., at runtime) determine the available
-		protocol actions and features of the MTA and also to
-		specify which of these a milter wants to use.  This allows
-		for more flexibility than hardcoding these flags in the
-		xxfi_flags field of the smfiDesc structure.
-	LIBMILTER: A new callback xxfi_data() is available so milters
-		can act on the DATA command.
-	LIBMILTER: A new callback xxfi_unknown() is available so milters
-		can receive also unknown SMTP commands.
-	LIBMILTER: A new return code SMFIS_NOREPLY has been added which
-		can be used by the xxfi_header() callback provided the
-		milter requested the SMFIP_NOHREPL protocol action.
-	LIBMILTER: The new return code SMFIS_SKIP can be used in the
-		xxfi_body() callback to skip over further body chunks
-		and directly advance to the xxfi_eom() callback.  This
-		is useful if a milter can make a decision based on the
-		body chunks it already received without reading the entire
-		rest of the body and the milter wants to invoke functions
-		that are only available from the xxfi_eom() callback.
-	LIBMILTER: A new function smfi_addrcpt_par() can be used to add
-		new recipients including ESMTP parameters.
-	LIBMILTER: A new function smfi_chgfrom() can be used to change the
-		envelope sender including ESMTP parameters.
-	LIBMILTER: A milter can now request to be informed about rejected
-		recipients (RCPT) too.  This requires to set the protocol
-		flag SMFIP_RCPT_REJ during option negotiation.  Whether
-		a RCPT has been rejected can be checked by comparing the
-		value of the macro {rcpt_mailer} with "error".
-	LIBMILTER: A milter can now override the list of macros that it
-		wants to receive from the MTA for each protocol step
-		by invoking the function smfi_setsymlist() during option
-		negotiation.
-	LIBMILTER: A milter can receive header field values with all
-		leading spaces by requesting the SMFIP_HDR_LEADSPC
-		protocol action.  Also, if the flag is set then the MTA
-		does not add a leading space to headers that are added,
-		inserted, or replaced.
-	LIBMILTER: If a milter sets the reply code to "421" for the HELO
-		callback, the SMTP server will terminate the SMTP session
-		with that error to match the behavior of all other callbacks.
-	New Files:
-		cf/feature/badmx.m4
-		cf/feature/block_bad_helo.m4
-		cf/feature/require_rdns.m4
-		devtools/M4/UNIX/check.m4
-		include/sm/misc.h
-		include/sm/sendmail.h
-		include/sm/tailq.h
-		libmilter/docs/smfi_addrcpt_par.html
-		libmilter/docs/smfi_setsymlist.html
-		libmilter/docs/xxfi_data.html
-		libmilter/docs/xxfi_negotiate.html
-		libmilter/docs/xxfi_unknown.html
-		libmilter/example.c
-		libmilter/monitor.c
-		libmilter/worker.c
-		libsm/memstat.c
-		libsm/t-memstat.c
-		libsm/t-qic.c
-		libsm/util.c
-		sendmail/daemon.h
-		sendmail/map.h
-
-8.13.8/8.13.8	2006/08/09
-	Fix a regression in 8.13.7: if shared memory is activated, then
-		the server can erroneously report that there is
-		insufficient disk space.  Additionally make sure that
-		an internal variable is set properly to avoid those
-		misleading errors.  Based on patch from Steve Hubert
-		of University of Washington.
-	Fix a regression in 8.13.7: the PidFile could be removed after
-		the process that forks the daemon exited, i.e., if
-		sendmail -bd is invoked.  Problem reported by Kan Sasaki
-		of Fusion Communications Corp. and Werner Wiethege.
-	Avoid opening qf files if QueueSortOrder is "none".  Patch from
-		David F. Skoll.
-	Avoid a crash when finishing due to referencing a freed variable.
-		Problem reported and diagnosed by Moritz Jodeit.
-	CONTRIB: cidrexpand now deals with /0 by issuing the entire IPv4
-		range (0..255).
-	LIBMILTER: The "hostname" argument of the xxfi_connect() callback
-		previously was the equivalent of {client_ptr}.  However,
-		this did not match the documentation of the function, hence
-		it has been changed to {client_name}.  See doc/op/op.*
-		about these macros.
-
-8.13.7/8.13.7	2006/06/14
-	A malformed MIME structure with many parts can cause sendmail to
-		crash while trying to send a mail due to a stack overflow,
-		e.g., if the stack size is limited (ulimit -s).  This
-		happens because the recursion of the function mime8to7()
-		was not restricted.  The function is called for MIME 8 to
-		7 bit conversion and also to enforce MaxMimeHeaderLength.
-		To work around this problem, recursive calls are limited to
-		a depth of MAXMIMENESTING (20); message content after this
-		limit is treated as opaque and is not checked further.
-		Problem noted by Frank Sheiness.
-	The changes to the I/O layer in 8.13.6 caused a regression for
-		SASL mechanisms that use the security layer, e.g.,
-		DIGEST-MD5.  Problem noted by Robert Stampfli.
-	If a timeout occurs while reading a message (during the DATA phase)
-		a df file might have been left behind in the queue.
-		This was another side effect of the changes to the I/O
-		layer made in 8.13.6.
-	Several minor problems have been fixed that were found by a
-		Coverity scan of sendmail 8 as part of the NetBSD
-		distribution. See http://scan.coverity.com/
-		Note: the scan generated also a lot of "false positives",
-		e.g., "error" reports about situations that cannot happen.
-		Most of those code places are marked with lint(1) comments
-		like NOTREACHED, but Coverity does not understand those.
-		Hence an explicit assertion has been added in some cases
-		to avoid those false positives.
-	If the start of the sendmail daemon fails due to a configuration
-		error then in some cases shared memory segments or pid
-		files were not removed.
-	If DSN support is disabled via access_db, then related ESMTP
-		parameters for MAIL and RCPT should be rejected.  Problem
-		reported by Akihiro Sagawa.
-	Enabling zlib compression in OpenSSL 0.9.8[ab] breaks the padding
-		bug work-around.  Hence if sendmail is linked against
-		either of these versions and compression is available,
-		the padding bug work-around is turned off.  Based on
-		patch from Victor Duchovni of Morgan Stanley.
-	CONFIG: FEATURE(`dnsbl') and FEATURE(`enhdnsbl') used
-		blackholes.mail-abuse.org as default domain for lookups,
-		however, that list is no longer available.  To avoid
-		further problems, no default value is available anymore,
-		but an argument must be specified.
-	Portability:
-		Fix compilation on OSF/1 for sfsasl.c.  Patch from
-		Pieter Bowman of the University of Utah.
-
-8.13.6/8.13.6	2006/03/22
-	SECURITY: Replace unsafe use of setjmp(3)/longjmp(3) in the server
-		and client side of sendmail with timeouts in the libsm I/O
-		layer and fix problems in that code.  Also fix handling of
-		a buffer in sm_syslog() which could have been used as an
-		attack vector to exploit the unsafe handling of
-		setjmp(3)/longjmp(3) in combination with signals.
-		Problem detected by Mark Dowd of ISS X-Force.
-	Handle theoretical integer overflows that could triggered if
-		the server accepted headers larger than the maximum
-		(signed) integer value.  This is prevented in the default
-		configuration by restricting the size of a header, and on
-		most machines memory allocations would fail before reaching
-		those values.  Problems found by Phil Brass of ISS.
-	If a server returns 421 for an RSET command when trying to start
-		another transaction in a session while sending mail, do
-		not trigger an internal consistency check.  Problem found
-		by Allan E Johannesen of Worcester Polytechnic Institute.
-	If a server returns a 5xy error code (other than 501) in response
-		to a STARTTLS command despite the fact that it advertised
-		STARTTLS and that the code is not valid according to RFC
-		2487 treat it nevertheless as a permanent failure instead
-		of a protocol error (which has been changed to a
-		temporary error in 8.13.5).  Problem reported by Jeff
-		A. Earickson of Colby College.
-	Clear SMTP state after a HELO/EHLO command.  Patch from John
-		Myers of Proofpoint.
-	Observe MinQueueAge option when gathering entries from the queue
-		for sorting etc instead of waiting until the entries are
-		processed.  Patch from Brian Fundakowski Feldman.
-	Set up TLS session cache to properly handle clients that try to
-		resume a stored TLS session.
-	Properly count the number of (direct) child processes such that
-		a configured value (MaxDaemonChildren) is not exceeded.
-		Based on patch from Attila Bruncsak.
-	LIBMILTER: Remove superfluous backslash in macro definition
-		(libmilter.h).  Based on patch from Mike Kupfer of
-		Sun Microsystems.
-	LIBMILTER: Don't try to set SO_REUSEADDR on UNIX domain sockets.
-		This generates an error message from libmilter on
-		Solaris, though other systems appear to just discard the
-		request silently.
-	LIBMILTER: Deal with sigwait(2) implementations that return
-		-1 and set errno instead of returning an error code
-		directly.  Patch from Chris Adams of HiWAAY Informations
-		Services.
-	Portability:
-		Fix compilation checks for closefrom(3) and statvfs(2)
-		in NetBSD.  Problem noted by S. Moonesamy, patch from
-		Andrew Brown.
-
-8.13.5/8.13.5	2005/09/16
-	Store the filesystem identifier of the df/ subdirectory (if it
-		exists) in an internal structure instead of the base
-		directory.  This structure is used decide whether there
-		is enough free disk space when selecting a queue, hence
-		without this change queue selection could fail if a df/
-		subdirectory exists and is on a different filesystem
-		than the base directory.
-	Use the queue index of the df file (instead of the qf file) for
-		checking whether a link(2) operation can be used to split
-		an envelope across queue groups.  Problem found by
-		Werner Wiethege.
-	If the list of items in the queue is larger than the maximum
-		number of items to process, sort the queue first and
-		then cut the list off instead of the other way around.
-		Patch from Matej Vela of Rudjer Boskovic Institute.
-	Fix helpfile to show full entry for ETRN.  Problem noted by
-		Penelope Fudd, patch from Neil Rickert of Northern Illinois
-		University.
-	FallbackSmartHost should also be tried on temporary errors.
-		From John Beck of Sun Microsystems.
-	When a server responds with 421 to the STARTTLS command then treat
-		it as a temporary error, not as protocol error.  Problem
-		noted by Andrey J. Melnikoff.
-	Properly define two functions in libsm as static because their
-		prototype used static too.  Patch from Peter Klein.
-	Fix syntax errors in helpfile for MAIL and RCPT commands.
-	LIBMILTER: When smfi_replacebody() is called with bodylen equals
-		zero then do not silently ignore that call.  Patch from
-		Gurusamy Sarathy of Active State.
-	LIBMILTER: Recognize "421" also in a multi-line reply to terminate
-		the SMTP session with that error.  Fix from Brian Kantor.
-	Portability: New option HASSNPRINTF which can be set if the OS
-			has a properly working snprintf(3) to get rid
-			of the last two (safe) sprintf(3) calls in the
-			source code.
-		Add support for AIX 5.3.
-		Add support for SunOS 5.11 (aka Solaris 11).
-		Add support for Darwin 8.x.  Patch from Lyndon Nerenberg.
-		OpenBSD 3.7 has removed support for NETISO.
-	CONFIG: Add OSTYPE(freebsd6) for FreeBSD 6.X.
-		Set DontBlameSendmail to AssumeSafeChown and
-			GroupWritableDirPathSafe for OSTYPE(darwin).
-			Patch from Lyndon Nerenberg.
-		Some features still used 4.7.1 as enhanced status code which
-			was supposed to be eliminated in 8.13.0 because some
-			broken systems misinterpret it as a permanent error.
-			Patch from Matej Vela of Rudjer Boskovic Institute.
-		Some default values in a generated cf file did not match
-			the defaults in the sendmail binary.  Problem noted
-			by Mike Pechkin.
-	New Files:
-		cf/ostype/freebsd6.m4
-		devtools/OS/AIX.5.3
-		devtools/OS/Darwin.8.x
-		devtools/OS/SunOS.5.11
-		include/sm/time.h
-
-8.13.4/8.13.4	2005/03/27
-	The bug fixes in 8.13.3 for connection handling uncovered a
-		different error which could result in connections that
-		stay in CLOSE_WAIT state due to a variable that was not
-		properly initialized.  Problem noted by Michael Sims.
-	Deal with empty hostnames in hostsignature().  This bug could lead
-		to an endless loop when doing LMTP deliveries to another
-		host.  Problem first reported by Martin Lathoud and
-		tracked down by Gael Roualland.
-	Make sure return parameters are initialized in getmxrr().  Problem
-		found by Gael Roualland using valgrind.
-	If shared memory is used and the RunAsUser option is set, then the
-		owner and group of the shared memory segment is set to
-		the ids specified RunAsUser and the access mode is set
-		to 0660 to allow for updates by sendmail processes.
-	The number of queue entries that is (optionally) kept in shared
-		memory was wrong in some cases, e.g., envelope splitting
-		and bounce generation.
-	Undo a change made in 8.13.0 to silently truncate long strings
-		in address rewriting because the message can be triggered
-		for header checks where long strings are legitimate.
-		Problem reported by Mary Verge DeSisto, and tracked
-		down with the help of John Beck of Sun Microsystems.
-	The internal stab map did not obey the -m flag.  Patch from
-		Rob McMahon of Warwick University, England.
-	The socket map did not obey the -f flag.  Problem noted by
-		Dan Ringdahl, forwarded by Andrzej Filip.
-	The addition of LDAP recursion in 8.13.0 broke enforcement of
-		the LDAP map -1 argument which tells the MTA to only
-		return success if and only if a single LDAP match is found.
-	Add additional error checks in the MTA for milter communication
-		to avoid a possible segmentation fault.  Based on patch
-		by Joe Maimon.
-	Do not trigger an assertion if X509_digest() returns success but
-		does not assign a value to its output parameter.  Based
-		on patch by Brian Kantor.
-	Add more checks when resetting internal AUTH data (applies only
-		to Cyrus SASL version 2).  Otherwise an SMTP session might
-		be dropped after an AUTH failure.
-	Portability:
-		Add LA_LONGLONG as valid LA_TYPE type for systems that use
-			"long long" to read load average data, e.g.,
-			AIX 5.1 in 32 bit mode.  Note: this has to be set
-			"by hand", it is not (yet) automatically detected.
-			Problem noted by Burak Bilen.
-		Use socklen_t for accept(), etc. on AIX 5.x.  This should
-			fix problems when compiling in 64 bit mode.
-			Problem first reported by Harry Meiert of
-			University of Bremen.
-	New Files:
-		include/sm/sem.h
-		libsm/sem.c
-		libsm/t-sem.c
-
-8.13.3/8.13.3	2005/01/11
-	Enhance handling of I/O errors, especially EOF, when STARTTLS
-		is active.
-	Make sure a connection is not reused after it has been closed
-		due to a 421 error.  Problem found by Allan E Johannesen
-		of Worcester Polytechnic Institute.
-	Avoid triggering an assertion when sendmail is interrupted while
-		closing a connection.  Problem found by Allan E Johannesen
-		of Worcester Polytechnic Institute.
-	Regression: a change in 8.13.2 caused sendmail not to try the
-		next MX host (or FallbackMXhost if configured) when, at
-		connection open, the current server returns a 4xy or 5xy
-		SMTP reply code.  Problem noted by Mark Tranchant.
-
-8.13.2/8.13.2	2004/12/15
-	Do not split the first header even if it exceeds the internal
-		buffer size.  Previously a part of such a header would
-		end up in the body of the message.  Problem noted by
-		Simple Nomad of BindView.
-	Do not complain about "cataddr: string too long" when checking
-		headers that do not contain RFC 2822 addresses.
-		Problem noted by Rich Graves of Brandeis University.
-	If a server returns a 421 reply to the RSET command between
-		message deliveries, do not attempt to deliver any more
-		messages on that connection.  This prevents bogus "Bad
-		file number" recipient status.  Problem noted by
-		Allan E Johannesen of Worcester Polytechnic Institute.
-	Allow trailing white space in EHLO command as recommended by RFC
-		2821.  Problem noted by Ralph Santagato of SBC Services.
-	Deal with clients which use AUTH but negotiate a smaller buffer size
-		for data exchanges than the value used by sendmail, e.g.,
-		Cyrus IMAP lmtp server.  Based on patch by Jamie Clark.
-	When passing ESMTP arguments for RCPT to a milter, do not cut
-		them off at a comma.  Problem noted by Krzysztof Oledzki.
-	Add more logging to milter change header functions to
-		complement existing logging.  Based on patch from
-		Gurusamy Sarathy of Active State.
-	Include <lber.h> in include/sm/config.h when LDAPMAP is defined.
-		Patch from Edgar Hoch of the University of Stuttgart.
-	Fix DNS lookup if IPv6 is enabled when converting an IP address
-		to a hostname for use with SASL.  Problem noted by Ken Jones;
-		patch from Hajimu UMEMOTO.
-	CONFIG: For consistency enable MODIFY_MAILER_FLAGS for the prog
-		mailer.  Patch from John Beck of Sun Microsystems.
-	LIBMILTER: It was possible that xxfi_abort() was called after
-		xxfi_eom() for a message if some timeouts were triggered.
-		Patch from Alexey Kravchuk.
-	LIBMILTER: Slightly rearrange mutex use in listener.c to allow
-		different threads to call smfi_opensocket() and smfi_main().
-		Patch from Jordan Ritter of Cloudmark.
-	MAIL.LOCAL: Properly terminate MBDB before exiting.  Problem
-		noted by Nelson Fung.
-	MAIL.LOCAL: make strip-mail.local used a wrong path to access
-		mail.local.  Problem noted by William Park.
-	VACATION: Properly terminate MBDB before exiting.  Problem noted
-		by Nelson Fung.
-	Portability:
-		Add support for DragonFly BSD.
-	New Files:
-		cf/ostype/dragonfly.m4
-		devtools/OS/DragonFly
-		include/sm/os/sm_os_dragonfly.h
-	Deleted Files:
-		libsm/vsscanf.c
-
 8.13.1/8.13.1	2004/07/30
 	Using the default AliasFile ldap: specification would cause the
 		objectClasses of the LDAP response to be included in the
@@ -752,7 +121,7 @@ summary of the changes in that release.
 	sendmail will now remove its pidfile when it exits.  This was done
 		to prevent confusion caused by running sendmail stop
 		scripts two or more times, where the second and subsequent
-		runs would report misleading error messages about sendmail's
+		runs would report misleading error messages about sendmail's 
 		pid no longer existing.  See section 1.3.15 of doc/op/op.me
 		for a discussion of the implications of this, including
 		how to correct broken scripts which may have depended on
@@ -1650,7 +1019,7 @@ summary of the changes in that release.
 	Properly count message size for mailstats during mail collection.
 		Problem noted by Werner Wiethege.
 	Log complete response from LMTP delivery agent on failure.  Based on
-		patch from Motonori Nakamura of Kyoto University.
+		patch from by Motonori Nakamura of Kyoto University.
 	Provide workaround for getopt() implementations that do not catch
 		missing arguments.
 	Fix the message size calculation if the message body is replaced by
@@ -77,7 +77,7 @@ Let's examine a typical .mc file:

 	divert(-1)
 	#
-	# Copyright (c) 1998-2005 Sendmail, Inc. and its suppliers.
+	# Copyright (c) 1998-2004 Sendmail, Inc. and its suppliers.
 	#	All rights reserved.
 	# Copyright (c) 1983 Eric P. Allman.  All rights reserved.
 	# Copyright (c) 1988, 1993
@@ -397,9 +397,6 @@ SMTP_MAILER_CHARSET	[undefined] If defined, messages containing 8-bit data
 			that ARRIVE from an address that resolves to one of
 			the SMTP mailers and which are converted to MIME will
 			be labeled with this character set.
-SMTP_MAILER_LL		[990] The maximum line length for SMTP mailers
-			(except the relay mailer).
-RELAY_MAILER_LL		[2040] The maximum line length for the relay mailer.
 UUCP_MAILER_PATH	[/usr/bin/uux] The program used to send UUCP mail.
 UUCP_MAILER_FLAGS	[undefined] Flags added to UUCP mailer.  Default
 			flags are `DFMhuU' (and `m' for uucp-new mailer,
@@ -495,12 +492,11 @@ QPAGE_MAILER_QGRP	[undefined] The queue group for the qpage mailer.
 LOCAL_PROG_QGRP		[undefined] The queue group for the prog mailer.

 Note: to tweak Name_MAILER_FLAGS use the macro MODIFY_MAILER_FLAGS:
-MODIFY_MAILER_FLAGS(`Name', `change') where Name is the first part
-of the macro Name_MAILER_FLAGS (note: that means Name is entirely in
-upper case) and change can be: flags that should be used directly
-(thus overriding the default value), or if it starts with `+' (`-')
-then those flags are added to (removed from) the default value.
-Example:
+MODIFY_MAILER_FLAGS(`Name', `change') where Name is the first part of
+the macro Name_MAILER_FLAGS and change can be: flags that should
+be used directly (thus overriding the default value), or if it
+starts with `+' (`-') then those flags are added to (removed from)
+the default value.  Example:

 	MODIFY_MAILER_FLAGS(`LOCAL', `+e')

@@ -962,7 +958,7 @@ generics_entire_domain

 virtusertable	A domain-specific form of aliasing, allowing multiple
 		virtual domains to be hosted on one machine.  For example,
-		if the virtuser table contains:
+		if the virtuser table contained:

 			[email protected]	foo-info
 			[email protected]	bar-info
@@ -1034,6 +1030,12 @@ ldap_routing	Implement LDAP-based e-mail recipient routing according to

 		See the LDAP ROUTING section below for more information.

+nodns		If you aren't running DNS at your site (for example,
+		you are UUCP-only connected).  It's hard to consider
+		this a "feature", but hey, it had to go somewhere.
+		Actually, as of 8.7 this is a no-op -- remove "dns" from
+		the hosts service switch entry instead.
+
 nullclient	This is a special case -- it creates a configuration file
 		containing nothing but support for forwarding all mail to a
 		central hub via a local SMTP-based network.  The argument
@@ -1184,7 +1186,7 @@ accept_unqualified_senders
 		Normally, MAIL FROM: commands in the SMTP session will be
 		refused if the connection is a network connection and the
 		sender address does not include a domain name.  If your
-		setup sends local mail unqualified (i.e., MAIL FROM:<joe>),
+		setup sends local mail unqualified (i.e., MAIL FROM: <joe>),
 		you will need to use this feature to accept unqualified
 		sender addresses.  Setting the DaemonPortOptions modifier
 		'u' overrides the default behavior, i.e., unqualified
@@ -1238,15 +1240,15 @@ use_client_ptr	If this feature is enabled then check_relay will override
 		versions when delay_checks was not in use.  See doc/op/op.*
 		about check_relay, {client_name}, and {client_ptr}.

-dnsbl		Turns on rejection, discarding, or quarantining of hosts
-		found in a DNS based list.  The first argument is used as
-		the domain in which blocked hosts are listed.  A second
-		argument can be used to change the default error message,
-		or select one of the operations `discard' and `quarantine'.
-		Without that second argument, the error message will be
-
+dnsbl		Turns on rejection of hosts found in an DNS based rejection
+		list.  If an argument is provided it is used as the domain
+		in which blocked hosts are listed; otherwise it defaults to
+		blackholes.mail-abuse.org.  An explanation for an DNS based
+		rejection list can be found at http://mail-abuse.org/rbl/.
+		A second argument can be used to change the default error
+		message.  Without that second argument, the error message
+		will be
 			Rejected: IP-ADDRESS listed at SERVER
-
 		where IP-ADDRESS and SERVER are replaced by the appropriate
 		information.  By default, temporary lookup failures are
 		ignored.  This behavior can be changed by specifying a
@@ -1276,6 +1278,13 @@ dnsbl		Turns on rejection, discarding, or quarantining of hosts

 		See below (EDNSBL_TO) for an explanation.

+		NOTE: The default DNS blacklist, blackholes.mail-abuse.org,
+		is a service offered by the Mail Abuse Prevention System
+		(MAPS).  As of July 31, 2001, MAPS is a subscription
+		service, so using that network address won't work if you
+		haven't subscribed.  Contact MAPS to subscribe
+		(http://mail-abuse.org/).
+
 enhdnsbl	Enhanced version of dnsbl (see above).  Further arguments
 		(up to 5) can be used to specify specific return values
 		from lookups.  Temporary lookup failures are ignored unless
@@ -1485,81 +1494,6 @@ greet_pause	Adds the greet_pause ruleset which enables open proxy
 			R$*		$: $&{daemon_flags}
 			R$* a $*	$# 0

-block_bad_helo	Reject messages from SMTP clients which provide a HELO/EHLO
-		argument which is either unqualified, or is one of our own
-		names (i.e., the server name instead of the client name).
-		This check is performed at RCPT stage and disabled for the
-		following cases:
-		- authenticated sessions,
-		- connections from IP addresses in class $={R}.
-		Currently access_db lookups can not be used to
-		(selectively) disable this test, moreover,
-		FEATURE(`delay_checks')
-		is required.
-
-require_rdns	Reject mail from connecting SMTP clients without proper
-		rDNS (reverse DNS), functional gethostbyaddr() resolution.
-		Note: this feature will cause false positives, i.e., there
-		are legitimate MTAs that do not have proper DNS entries.
-		Rejecting mails from those MTAs is a local policy decision.
-
-		The basic policy is to reject message with a 5xx error if
-		the IP address fails to resolve.  However, if this is a
-		temporary failure, a 4xx temporary failure is returned.
-		If the look-up succeeds, but returns an apparently forged
-		value, this is treated as a temporary failure with a 4xx
-		error code.
-
-		EXCEPTIONS:
-
-		Exceptions based on access entries are discussed below.
-		Any IP address matched using $=R (the "relay-domains" file)
-		is excepted from the rules.  Since we have explicitly
-		allowed relaying for this host, based on IP address, we
-		ignore the rDNS failure.
-
-		The philosophical assumption here is that most users do
-		not control their rDNS.  They should be able to send mail
-		through their ISP, whether or not they have valid rDNS.
-		The class $=R, roughly speaking, contains those IP addresses
-		and address ranges for which we are the ISP, or are acting
-		as if the ISP.
-
-		If `delay_checks' is in effect (recommended), then any
-		sender who has authenticated is also excepted from the
-		restrictions.  This happens because the rules produced by
-		this FEATURE() will not be applied to authenticated senders
-		(assuming `delay_checks').
-
-		ACCESS MAP ENTRIES:
-
-		Entries such as
-			Connect:1.2.3.4		OK
-			Connect:1.2		RELAY
-		will whitelist IP address 1.2.3.4, so that the rDNS
-		blocking does apply to that IP address
-
-		Entries such as
-			Connect:1.2.3.4		REJECT
-		will have the effect of forcing a temporary failure for
-		that address to be treated as a permanent failure.
-
-badmx		Reject envelope sender addresses (MAIL) whose domain part
-		resolves to a "bad" MX record.  By default these are
-		MX records which resolve to A records that match the
-		regular expression:
-
-		^(127\.|10\.|0\.0\.0\.0)
-
-		This default regular expression can be overridden by
-		specifying an argument, e.g.,
-
-		FEATURE(`badmx', `^127\.0\.0\.1')
-
-		Note: this feature requires that the sendmail binary
-		has been compiled with the options MAP_REGEX and
-		DNSMAP.
-
 +-------+
 | HACKS |
 +-------+
@@ -1659,7 +1593,7 @@ The four mailers are:

    uucp-old (obsolete name: "uucp")
 	This is the oldest, the worst (but the closest to UUCP) way of
-	sending messages across UUCP connections.  It does bangify
+	sending messages accros UUCP connections.  It does bangify
 	everything and prepends $U (your UUCP name) to the sender's
 	address (which can already be a bang path itself).  It can
 	only send to one address at a time, so it spends a lot of
@@ -1938,8 +1872,7 @@ sections below).
 See the file cf/sendmail.schema for the actual LDAP schemas.  Note that
 this schema (and therefore the lookups and examples below) is experimental
 at this point as it has had little public review.  Therefore, it may change
-in future versions.  Feedback via sendmail-YYYY@support.sendmail.org is
-encouraged (replace YYYY with the current year, e.g., 2005).
+in future versions.  Feedback via sendmail@sendmail.org is encouraged.

 -------
 Aliases
@@ -2403,7 +2336,7 @@ without any prior arrangement).  Along the same lines,
 	FEATURE(`relay_local_from')

 will allow relaying if the sender specifies a return path (i.e.
-MAIL FROM:<user@domain>) domain which is a local domain.  This is a
+MAIL FROM: <user@domain>) domain which is a local domain.  This is a
 dangerous feature as it will allow spammers to spam using your mail
 server by simply specifying a return address of [email protected].
 It should not be used unless absolutely necessary.
@@ -2424,7 +2357,7 @@ allow relaying for roaming users.


 If source routing is used in the recipient address (e.g.,
-RCPT TO:<user%[email protected]>), sendmail will check
+RCPT TO: <user%[email protected]>), sendmail will check
 [email protected] for relaying if othersite.com is an allowed relay host
 in either class {R}, class {m} if FEATURE(`relay_entire_domain') is used,
 or the access database if FEATURE(`access_db') is used.  To prevent
@@ -2501,15 +2434,10 @@ definition for the database; for example
 	FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access_map')

 Notice: If a second argument is specified it must contain the option
-`-T<TMPF>' as shown above.  The optional parameters may be
-
-	`skip'			enables SKIP as value part (see below).
-	`lookupdotdomain'	another way to enable the feature of the
-				same name (see above).
-	`relaytofulladdress'	enable entries of the form
-				To:[email protected]	RELAY
-				to allow relaying to just a specific
-				e-mail address instead of an entire domain.
+`-T<TMPF>' as shown above.  The optional third and fourth parameters
+may be `skip' or `lookupdotdomain'.  The former enables SKIP as
+value part (see below), the latter is another way to enable the
+feature of the same name (see above).

 Remember, since /etc/mail/access is a database, after creating the text
 file as described below, you must use makemap to create the database
@@ -2577,8 +2505,7 @@ The value part of the map can contain:
 			name is unresolvable.  "Accept" does not mean
 			"relay", but at most acceptance for local
 			recipients.  That is, OK allows less than RELAY.
-	RELAY		Accept mail addressed to the indicated domain
-			(or address if `relaytofulladdress' is set) or
+	RELAY		Accept mail addressed to the indicated domain or
 			received from the indicated domain for relaying
 			through your SMTP server.  RELAY also serves as
 			an implicit OK for the other checks.
@@ -2595,30 +2522,15 @@ The value part of the map can contain:
 			it but causing the default action.
 	### any text	where ### is an RFC 821 compliant error code and
 			"any text" is a message to return for the command.
-			The entire string should be quoted to avoid
-			surprises:
-
-				"### any text"
-
-			Otherwise sendmail formats the text as email
-			addresses, e.g., it may remove spaces.
+			The string should be quoted to avoid surprises,
+			e.g., sendmail may remove spaces otherwise.
 			This type is deprecated, use one of the two
 			ERROR:  entries below instead.
 	ERROR:### any text
 			as above, but useful to mark error messages as such.
-			If quotes need to be used to avoid modifications
-			(see above), they should be placed like this:
-
-				ERROR:"### any text"
-
 	ERROR:D.S.N:### any text
 			where D.S.N is an RFC 1893 compliant error code
-			and the rest as above.  If quotes need to be used
-			to avoid modifications, they should be placed
-			like this:
-
-				ERROR:D.S.N:"### any text"
-
+			and the rest as above.
 	QUARANTINE:any text
 			Quarantine the message using the given text as the
 			quarantining reason.
@@ -2702,33 +2614,31 @@ as value part in the access map.  Taking the example from above:
 Mail can't be sent to [email protected] or anyone at cyberspammer.com.
 That's why tagged entries should be used.

-There are several DNS based blacklists which can be found by
-querying a search engine.  These are databases of spammers
+There are several DNS based blacklists, the first of which was
+the RBL (``Realtime Blackhole List'') run by the MAPS project,
+see http://mail-abuse.org/.  These are databases of spammers
 maintained in DNS.  To use such a database, specify

-	FEATURE(`dnsbl', `dnsbl.example.com')
+	FEATURE(`dnsbl')

-This will cause sendmail to reject mail from any site listed in the
-DNS based blacklist.  You must select a DNS based blacklist domain
-to check by specifying an argument to the FEATURE.  The default
-error message is
+This will cause sendmail to reject mail from any site in the original
+Realtime Blackhole List database.  This default DNS blacklist,
+blackholes.mail-abuse.org, is a service offered by the Mail Abuse
+Prevention System (MAPS).  As of July 31, 2001, MAPS is a subscription
+service, so using that network address won't work if you haven't
+subscribed.  Contact MAPS to subscribe (http://mail-abuse.org/).
+
+You can specify an alternative RBL server to check by specifying an
+argument to the FEATURE.  The default error message is

 	Rejected: IP-ADDRESS listed at SERVER

 where IP-ADDRESS and SERVER are replaced by the appropriate
 information.  A second argument can be used to specify a different
-text or action.  For example,
-
-	FEATURE(`dnsbl', `dnsbl.example.com', `quarantine')
-
-would quarantine the message if the client IP address is listed
-at `dnsbl.example.com'.
-
-By default, temporary lookup failures are ignored
-and hence cause the connection not to be rejected by the DNS based
-rejection list.  This behavior can be changed by specifying a third
-argument, which must be either `t' or a full error message.  For
-example:
+text.  By default, temporary lookup failures are ignored and hence
+cause the connection not to be rejected by the DNS based rejection
+list.  This behavior can be changed by specifying a third argument,
+which must be either `t' or a full error message.  For example:

 	FEATURE(`dnsbl', `dnsbl.example.com', `',
 	`"451 Temporary lookup failure for " $&{client_addr} " in dnsbl.example.com"')
@@ -2741,7 +2651,8 @@ where IP-ADDRESS and SERVER are replaced by the appropriate
 information.

 This FEATURE can be included several times to query different
-DNS based rejection lists.
+DNS based rejection lists, e.g., the dial-up user list (see
+http://mail-abuse.org/dul/).

 Notice: to avoid checking your own local domains against those
 blacklists, use the access_db feature and add:
@@ -2751,7 +2662,7 @@ blacklists, use the access_db feature and add:

 to the access map, where 10.1 is your local network.  You may
 want to use "RELAY" instead of "OK" to allow also relaying
-instead of just disabling the DNS lookups in the blacklists.
+instead of just disabling the DNS lookups in the backlists.


 The features described above make use of the check_relay, check_mail,
@@ -2885,9 +2796,9 @@ That may cause problems with simple header checks due to the
 tokenization.  It might be simpler to use a regex map and apply it
 to $&{currHeader}.
 2. There are no default rulesets coming with this distribution of
-sendmail.  You can write your own, can search the WWW for examples,
-or take a look at cf/cf/knecht.mc.
-3. When using a default ruleset for headers, the name of the header
+sendmail.  You can either write your own or you can search the
+WWW for examples, e.g.,  http://www.digitalanswers.org/check_local/
+3. When using a default ruleset for headers, the name of the header 
 currently being checked can be found in the $&{hdr_name} macro.

 After all of the headers are read, the check_eoh ruleset will be called for
@@ -2959,12 +2870,12 @@ the previous paragraph.  Example:
 | STARTTLS |
 +----------+

-In this text, cert will be used as an abbreviation for X.509 certificate,
+In this text, cert will be used as an abreviation for X.509 certificate,
 DN (CN) is the distinguished (common) name of a cert, and CA is a
 certification authority, which signs (issues) certs.

 For STARTTLS to be offered by sendmail you need to set at least
-these variables (the file names and paths are just examples):
+this variables (the file names and paths are just examples):

 	define(`confCACERT_PATH', `/etc/mail/certs/')
 	define(`confCACERT', `/etc/mail/certs/CA.cert.pem')
@@ -4100,17 +4011,12 @@ confDONT_INIT_GROUPS	DontInitGroups	[False] If set, the initgroups(3)
 					will only have their primary
 					(/etc/passwd) group permissions.
 confUNSAFE_GROUP_WRITES	UnsafeGroupWrites
-					[True] If set, group-writable
+					[False] If set, group-writable
 					:include: and .forward files are
 					considered "unsafe", that is, programs
 					and files cannot be directly referenced
 					from such files.  World-writable files
 					are always considered unsafe.
-					Notice: this option is deprecated and
-					will be removed in future versions;
-					Set GroupWritableForwardFileSafe
-					and GroupWritableIncludeFileSafe in
-					DontBlameSendmail if required.
 confCONNECT_ONLY_TO	ConnectOnlyTo	[undefined] override connection
 					address (for testing).
 confCONTROL_SOCKET_NAME	ControlSocketName
@@ -4122,11 +4028,6 @@ confDOUBLE_BOUNCE_ADDRESS  DoubleBounceAddress
 					"double bounce" error message to this
 					address.  If it expands to an empty
 					string, double bounces are dropped.
-confSOFT_BOUNCE		SoftBounce	[False] If set, issue temporary errors
-					(4xy) instead of permanent errors
-					(5xy).  This can be useful during
-					testing of a new configuration to
-					avoid erroneous bouncing of mails.
 confDEAD_LETTER_DROP	DeadLetterDrop	[undefined] Filename to save bounce
 					messages which could not be returned
 					to the user or sent to postmaster.
@@ -4226,8 +4127,12 @@ confAUTH_OPTIONS	AuthOptions	[undefined] If this option is 'A'
 					then the AUTH= parameter for the
 					MAIL FROM command is only issued
 					when authentication succeeded.
-					See doc/op/op.me for more options
-					and details.
+					Other values (which should be listed
+					one after the other without any
+					intervening characters except for
+					space or comma) are a, c, d, f, p,
+					and y.  See doc/op/op.me for
+					details.
 confAUTH_MAX_BITS	AuthMaxBits	[INT_MAX] Limit the maximum encryption
 					strength for the security layer in
 					SMTP AUTH (SASL).  Default is
@@ -4282,7 +4187,7 @@ confNICE_QUEUE_RUN	NiceQueueRun	[undefined]  If set, the priority of
 confDIRECT_SUBMISSION_MODIFIERS	DirectSubmissionModifiers
 					[undefined] Defines {daemon_flags}
 					for direct submissions.
-confUSE_MSP		UseMSP		[undefined] Use as mail submission
+confUSE_MSP		UseMSP		[false] Use as mail submission
 					program, see sendmail/SECURITY.
 confDELIVER_BY_MIN	DeliverByMin	[0] Minimum time for Deliver By
 					SMTP Service Extension (RFC 2852).
@@ -4291,11 +4196,6 @@ confREQUIRES_DIR_FSYNC	RequiresDirfsync	[true] RequiresDirfsync can
 					flag REQUIRES_DIR_FSYNC at runtime.
 					See sendmail/README for details.
 confSHARED_MEMORY_KEY	SharedMemoryKey [0] Key for shared memory.
-confSHARED_MEMORY_KEY_FILE
-			SharedMemoryKeyFile
-					[undefined] File where the
-					automatically selected key for
-					shared memory is stored.
 confFAST_SPLIT		FastSplit	[1] If set to a value greater than
 					zero, the initial MX lookups on
 					addresses is suppressed when they
@@ -4309,11 +4209,6 @@ confMAILBOX_DATABASE	MailboxDatabase	[pw] Type of lookup to find
 					information about local mailboxes.
 confDEQUOTE_OPTS	-		[empty] Additional options for the
 					dequote map.
-confMAX_NOOP_COMMANDS	MaxNOOPCommands	[20] Maximum number of "useless"
-					commands before the SMTP server
-					will slow down responding.
-confHELO_NAME		HeloName	If defined, use as name for EHLO/HELO
-					command (instead of $j).
 confINPUT_MAIL_FILTERS	InputMailFilters
 					A comma separated list of filters
 					which determines which filters and
@@ -4345,14 +4240,7 @@ confMILTER_MACROS_ENVRCPT	Milter.macros.envrcpt
 					milters after RCPT TO command.
 confMILTER_MACROS_EOM		Milter.macros.eom
 					[{msg_id}] Macros to transmit to
-					milters after the terminating
-					DATA '.' is received.
-confMILTER_MACROS_EOH		Milter.macros.eoh
-					Macros to transmit to milters
-					after the end of headers.
-confMILTER_MACROS_DATA		Milter.macros.data
-					Macros to transmit to milters
-					after DATA command is received.
+					milters after DATA command.


 See also the description of OSTYPE for some parameters that can be
@@ -4699,4 +4587,4 @@ M4 DIVERSIONS
   8	DNS based blacklists
   9	special local rulesets (1 and 2)

-$Revision: 8.722 $, Last updated $Date: 2007/04/03 21:26:58 $
+$Revision: 8.691 $, Last updated $Date: 2004/07/19 17:47:34 $
@@ -1,7 +1,7 @@
 #
 #  Makefile for configuration files.
 #
-#	$Id: Makefile,v 8.60 2005/06/14 02:16:34 gshapiro Exp $
+#	$Id: Makefile,v 8.58 2003/10/20 22:01:00 ca Exp $
 #

 #
@@ -164,11 +164,9 @@ M4FILES=\
 	${CFDIR}/ostype/bsdi2.0.m4 \
 	${CFDIR}/ostype/dgux.m4 \
 	${CFDIR}/ostype/domainos.m4 \
-	${CFDIR}/ostype/dragonfly.m4 \
 	${CFDIR}/ostype/dynix3.2.m4 \
 	${CFDIR}/ostype/freebsd4.m4 \
 	${CFDIR}/ostype/freebsd5.m4 \
-	${CFDIR}/ostype/freebsd6.m4 \
 	${CFDIR}/ostype/gnu.m4 \
 	${CFDIR}/ostype/hpux10.m4 \
 	${CFDIR}/ostype/hpux11.m4 \
@@ -1,6 +1,6 @@
 divert(-1)
 #
-# Copyright (c) 1998-2001, 2004, 2005 Sendmail, Inc. and its suppliers.
+# Copyright (c) 1998-2001 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 # Copyright (c) 1983 Eric P. Allman.  All rights reserved.
 # Copyright (c) 1988, 1993
@@ -19,7 +19,7 @@ divert(-1)
 #

 divert(0)
-VERSIONID(`$Id: knecht.mc,v 8.62 2006/09/27 19:48:59 eric Exp $')
+VERSIONID(`$Id: knecht.mc,v 8.58 2004/01/28 00:54:41 eric Exp $')
 OSTYPE(bsd4.4)
 DOMAIN(generic)

@@ -30,7 +30,6 @@ define(`confHOST_STATUS_DIRECTORY', `.hoststat')
 define(`confTO_ICONNECT', `10s')
 define(`confTO_QUEUEWARN', `8h')
 define(`confMIN_QUEUE_AGE', `27m')
-define(`confTRUSTED_USER', `smtrust')
 define(`confTRUSTED_USERS', ``www listmgr'')
 define(`confPRIVACY_FLAGS', ``authwarnings,noexpn,novrfy'')

@@ -43,13 +42,11 @@ define(`confCLIENT_CERT', `CERT_DIR/MYcert.pem')
 define(`confCLIENT_KEY', `CERT_DIR/MYkey.pem')

 define(`CYRUS_MAILER_PATH', `/usr/local/cyrus/bin/deliver')
-define(`CYRUS_MAILER_FLAGS', `fAh5@/:|')

-FEATURE(`access_db')
-FEATURE(`blacklist_recipients')
-FEATURE(`local_lmtp')
-FEATURE(`virtusertable')
-FEATURE(`mailertable')
+FEATURE(access_db)
+FEATURE(local_lmtp)
+FEATURE(virtusertable)
+FEATURE(mailertable)

 FEATURE(`nocanonify', `canonify_hosts')
 CANONIFY_DOMAIN(`sendmail.org')
@@ -66,26 +63,13 @@ define(`confFAST_SPLIT', `10')
 dnl #  10 runners, split into at most 15 recipients per envelope
 QUEUE_GROUP(`mqueue', `P=/var/spool/mqueue, R=5, r=15, F=f')

+
 dnl # enable spam assassin
 INPUT_MAIL_FILTER(`spamassassin', `S=local:/var/run/spamass-milter.sock, F=, T=C:15m;S:4m;R:4m;E:10m')

-dnl # enable DomainKeys and DKIM
-INPUT_MAIL_FILTER(`dkim-filter', `S=unix:/var/run/smtrust/dkim.sock, F=T, T=R:2m')
-dnl INPUT_MAIL_FILTER(`dk-filter', `S=unix:/var/run/smtrust/dk.sock, F=T, T=R:2m')
-
-define(`confMILTER_MACROS_CONNECT', `j, {daemon_name}')
-define(`confMILTER_MACROS_ENVFROM', `i, {auth_type}')
-
-dnl # enable some DNSBLs
-dnl FEATURE(`dnsbl', `dnsbl.sorbs.net', `"550 Mail from " $`'&{client_addr} " refused - see http://www.dnsbl.sorbs.net/"')
-FEATURE(`dnsbl', `sbl-xbl.spamhaus.org', `"550 Mail from " $`'&{client_addr} " refused - see http://www.spamhaus.org/sbl/"')
-FEATURE(`dnsbl', `list.dsbl.org', `"550 Mail from " $`'&{client_addr} " refused - see http://dsbl.org/"')
-FEATURE(`dnsbl', `bl.spamcop.net', `"450 Mail from " $`'&{client_addr} " refused - see http://spamcop.net/bl.shtml"')
-
-
-MAILER(`local')
-MAILER(`smtp')
-MAILER(`cyrus')
+MAILER(local)
+MAILER(smtp)
+MAILER(cyrus)

 LOCAL_RULE_0
 Rcyrus.$+ + $+ < @ $=w . >	$#cyrus $@ $2 $: $1
@@ -16,8 +16,8 @@
 #####
 #####		SENDMAIL CONFIGURATION FILE
 #####
-##### built by ca@nother.smi.sendmail.com on Wed Oct 31 09:24:27 PDT 2007
-##### in /extra/home/ca/sm-8.14.2/OpenSource/sendmail-8.14.2/cf/cf
+##### built by ca@wiz.smi.sendmail.com on Fri Jul 30 11:06:26 PDT 2004
+##### in /extra/home/ca/sm-8.13.1/OpenSource/sendmail-8.13.1/cf/cf
 ##### using ../ as configuration include directory
 #####
 ######################################################################
@@ -29,13 +29,13 @@

 #####  $Id: cfhead.m4,v 8.116 2004/01/28 22:02:22 ca Exp $  #####
 #####  $Id: cf.m4,v 8.32 1999/02/07 07:26:14 gshapiro Exp $  #####
-#####  $Id: submit.mc,v 8.14 2006/04/05 05:54:41 ca Exp $  #####
+#####  $Id: submit.mc,v 8.13 2003/09/10 22:12:48 ca Exp $  #####
 #####  $Id: msp.m4,v 1.33 2004/02/09 22:32:38 ca Exp $  #####

 #####  $Id: no_default_msa.m4,v 8.2 2001/02/14 05:03:22 gshapiro Exp $  #####


-#####  $Id: proto.m4,v 8.732 2007/04/20 00:53:30 ca Exp $  #####
+#####  $Id: proto.m4,v 8.710 2004/07/27 17:32:48 ca Exp $  #####

 # level 10 config file format
 V10/Berkeley
@@ -114,7 +114,7 @@ D{MTAHost}[127.0.0.1]


 # Configuration version number
-DZ8.14.2/Submit
+DZ8.13.1/Submit


 ###############
@@ -252,7 +252,7 @@ O PrivacyOptions=goaway,noetrn,restrictqrun
 #O MinQueueAge=30m

 # how many jobs can you process in the queue?
-#O MaxQueueRunSize=0
+#O MaxQueueRunSize=10000

 # perform initial split of envelope without checking MX records
 #O FastSplit=1
@@ -260,11 +260,10 @@ O PrivacyOptions=goaway,noetrn,restrictqrun
 # queue directory
 O QueueDirectory=/var/spool/clientmqueue

-# key for shared memory; 0 to turn off, -1 to auto-select
+# key for shared memory; 0 to turn off
 #O SharedMemoryKey=0

-# file to store auto-selected key for shared memory (SharedMemoryKey = -1)
-#O SharedMemoryKeyFile
+

 # timeouts (many of these)
 #O Timeout.initial=5m
@@ -372,7 +371,7 @@ O TimeZoneSpec=
 #O RetryFactor=90000

 # default character set
-#O DefaultCharSet=unknown-8bit
+#O DefaultCharSet=iso-8859-1

 # service switch file (name hardwired on Solaris, Ultrix, OSF/1, others)
 #O ServiceSwitchFile=/etc/mail/service.switch
@@ -381,13 +380,13 @@ O TimeZoneSpec=
 #O HostsFile=/etc/hosts

 # dialup line delay on connection failure
-#O DialDelay=0s
+#O DialDelay=10s

 # action to take if there are no recipients in the message
-#O NoRecipientAction=none
+#O NoRecipientAction=add-to-undisclosed

 # chrooted environment for writing to files
-#O SafeFileEnvironment
+#O SafeFileEnvironment=/arch

 # are colons OK in addresses?
 #O ColonOkInAddr=True
@@ -424,9 +423,6 @@ O DontInitGroups=True
 # where do errors that occur when sending errors get sent?
 #O DoubleBounceAddress=postmaster

-# issue temporary errors (4xy) instead of permanent errors (5xy)?
-#O SoftBounce=False
-
 # where to save bounces if all else fails
 #O DeadLetterDrop=/var/tmp/dead.letter

@@ -523,12 +519,6 @@ O PidFile=/var/spool/clientmqueue/sm-client.pid
 # Random data source (required for systems without /dev/urandom under OpenSSL)
 #O RandFile

-# Maximum number of "useless" commands before slowing down
-#O MaxNOOPCommands=20
-
-# Name to use for EHLO (defaults to $j)
-#O HeloName
-
 ############################
 # QUEUE GROUP DEFINITIONS  #
 ############################
@@ -1052,12 +1042,10 @@ R<? $+> $*		$#error $@ 5.5.4 $: "553 Domain name required for sender address " $
 							...remote is not
 # check results
 R<?> $*			$: @ $1		mark address: nothing known about it
-R<$={ResOk}> $*		$: @ $2		domain ok
+R<$={ResOk}> $*		$@ <OKR>	domain ok: stop
 R<TEMP> $*		$#error $@ 4.1.8 $: "451 Domain of sender address " $&f " does not resolve"
 R<PERM> $*		$#error $@ 5.1.8 $: "553 Domain of sender address " $&f " does not exist"

-
-
 ######################################################################
 ###  check_rcpt -- check SMTP `RCPT TO:' command argument
 ######################################################################
@@ -1160,7 +1148,6 @@ R<?> $* $=R			$@ RELAY



-
 ######################################################################
 ###  trust_auth: is user trusted to authenticate as someone else?
 ###
@@ -1296,7 +1283,7 @@ R$*			$#relay $@ ${MTAHost} $: $1 < @ $j >
 ###   Local and Program Mailer specification   ###
 ##################################################

-#####  $Id: local.m4,v 8.59 2004/11/23 00:37:25 ca Exp $  #####
+#####  $Id: local.m4,v 8.58 2000/10/26 01:58:29 ca Exp $  #####

 #
 #  Envelope sender rewriting
@@ -1348,7 +1335,7 @@ Mprog,		P=[IPC], F=lmDFMuXk5, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, D=$z:/,
 ###   SMTP Mailer specification   ###
 #####################################

-#####  $Id: smtp.m4,v 8.65 2006/07/12 21:08:10 ca Exp $  #####
+#####  $Id: smtp.m4,v 8.64 2001/04/03 01:52:54 gshapiro Exp $  #####

 #
 #  common sender and masquerading recipient rewriting
@@ -1454,7 +1441,7 @@ Mrelay,		P=[IPC], F=mDFMuXa8k, S=EnvFromSMTP/HdrFromSMTP, R=MasqSMTP, E=\r\n, L=
 # #
 # 
 # divert(0)dnl
-# VERSIONID(`$Id: submit.mc,v 8.14 2006/04/05 05:54:41 ca Exp $')
+# VERSIONID(`$Id: submit.mc,v 8.13 2003/09/10 22:12:48 ca Exp $')
 # define(`confCF_VERSION', `Submit')dnl
 # define(`__OSTYPE__',`')dnl dirty hack to keep proto.m4 from complaining
 # define(`_USE_DECNET_SYNTAX_', `1')dnl support DECnet
@@ -15,7 +15,7 @@ divert(-1)
 #

 divert(0)dnl
-VERSIONID(`$Id: submit.mc,v 8.14 2006/04/05 05:54:41 ca Exp $')
+VERSIONID(`$Id: submit.mc,v 8.13 2003/09/10 22:12:48 ca Exp $')
 define(`confCF_VERSION', `Submit')dnl
 define(`__OSTYPE__',`')dnl dirty hack to keep proto.m4 from complaining
 define(`_USE_DECNET_SYNTAX_', `1')dnl support DECnet
@@ -1,6 +1,6 @@
 divert(-1)
 #
-# Copyright (c) 1998-2002, 2004, 2006 Sendmail, Inc. and its suppliers.
+# Copyright (c) 1998-2002, 2004 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 #
 # By using this file, you agree to the terms and conditions set
@@ -10,20 +10,15 @@ divert(-1)
 #

 divert(0)
-VERSIONID(`$Id: access_db.m4,v 8.27 2006/07/06 21:10:10 ca Exp $')
+VERSIONID(`$Id: access_db.m4,v 8.26 2004/06/24 18:10:02 ca Exp $')
 divert(-1)

 define(`_ACCESS_TABLE_', `')
 define(`_TAG_DELIM_', `:')dnl should be in OperatorChars
 ifelse(lower(_ARG2_),`skip',`define(`_ACCESS_SKIP_', `1')')
 ifelse(lower(_ARG2_),`lookupdotdomain',`define(`_LOOKUPDOTDOMAIN_', `1')')
-ifelse(lower(_ARG2_),`relaytofulladdress',`define(`_RELAY_FULL_ADDR_', `1')')
 ifelse(lower(_ARG3_),`skip',`define(`_ACCESS_SKIP_', `1')')
 ifelse(lower(_ARG3_),`lookupdotdomain',`define(`_LOOKUPDOTDOMAIN_', `1')')
-ifelse(lower(_ARG3_),`relaytofulladdress',`define(`_RELAY_FULL_ADDR_', `1')')
-ifelse(lower(_ARG4_),`skip',`define(`_ACCESS_SKIP_', `1')')
-ifelse(lower(_ARG4_),`lookupdotdomain',`define(`_LOOKUPDOTDOMAIN_', `1')')
-ifelse(lower(_ARG4_),`relaytofulladdress',`define(`_RELAY_FULL_ADDR_', `1')')
 define(`_ATMPF_', `<TMPF>')dnl
 dnl check whether arg contains -T`'_ATMPF_
 dnl unless it is a sequence map
@@ -1,22 +0,0 @@
-divert(-1)
-#
-# Copyright (c) 2006 Sendmail, Inc. and its suppliers.
-#	All rights reserved.
-#
-# By using this file, you agree to the terms and conditions set
-# forth in the LICENSE file which can be found at the top level of
-# the sendmail distribution.
-#
-#
-
-divert(0)
-VERSIONID(`$Id: badmx.m4,v 1.1 2006/12/16 00:56:32 ca Exp $')
-divert(-1)
-
-define(`_BADMX_CHK_', 1)
-
-LOCAL_CONFIG
-Kmxlist bestmx -z: -T<TEMP>
-Kbadmx regex -a<BADMX> ^(([0-9]{1,3}\.){3}[0-9]){0,1}\.$
-KdnsA dns -R A -a. -T<TEMP>
-KBadMXIP regex -a<BADMXIP> ifelse(defn(`_ARG_'), `', `^(127\.|10\.|0\.0\.0\.0)', `_ARG_')
@@ -1,18 +0,0 @@
-divert(-1)
-#
-# Copyright (c) 2006 Sendmail, Inc. and its suppliers.
-#	All rights reserved.
-#
-# By using this file, you agree to the terms and conditions set
-# forth in the LICENSE file which can be found at the top level of
-# the sendmail distribution.
-#
-#
-
-divert(0)dnl
-VERSIONID(`$Id: block_bad_helo.m4,v 1.1 2006/06/15 22:49:30 ca Exp $')
-divert(-1)
-
-define(`_BLOCK_BAD_HELO_', `')dnl
-RELAY_DOMAIN(`127.0.0.1')dnl
-LOCAL_DOMAIN(`[127.0.0.1]')dnl
@@ -1,6 +1,6 @@
 divert(-1)
 #
-# Copyright (c) 1998-2002, 2005-2007 Sendmail, Inc. and its suppliers.
+# Copyright (c) 1998-2002 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 #
 # By using this file, you agree to the terms and conditions set
@@ -12,15 +12,13 @@ divert(-1)
 ifdef(`DNSBL_MAP', `', `define(`DNSBL_MAP', `dns -R A')')
 divert(0)
 ifdef(`_DNSBL_R_',`dnl',`dnl
-VERSIONID(`$Id: dnsbl.m4,v 8.33 2007/01/05 18:49:29 ca Exp $')
+VERSIONID(`$Id: dnsbl.m4,v 8.29 2002/08/09 21:02:08 ca Exp $')
 define(`_DNSBL_R_',`')
-ifelse(defn(`_ARG_'), `', 
-	`errprint(`*** ERROR: missing argument for FEATURE(`dnsbl')')')
 LOCAL_CONFIG
 # map for DNS based blacklist lookups
 Kdnsbl DNSBL_MAP -T<TMP>ifdef(`DNSBL_MAP_OPT',` DNSBL_MAP_OPT')')
 divert(-1)
-define(`_DNSBL_SRV_', `_ARG_')dnl
+define(`_DNSBL_SRV_', `ifelse(len(X`'_ARG_),`1',`blackholes.mail-abuse.org',_ARG_)')dnl
 define(`_DNSBL_MSG_', `ifelse(len(X`'_ARG2_),`1',`"550 Rejected: " $`'&{client_addr} " listed at '_DNSBL_SRV_`"',`_ARG2_')')dnl
 define(`_DNSBL_MSG_TMP_', `ifelse(_ARG3_,`t',`"451 Temporary lookup failure of " $`'&{client_addr} " at '_DNSBL_SRV_`"',`_ARG3_')')dnl
 divert(8)
@@ -30,10 +28,6 @@ R$-.$-.$-.$-		$: <?> $(dnsbl $4.$3.$2.$1._DNSBL_SRV_. $: OK $)
 R<?>OK			$: OKSOFAR
 ifelse(len(X`'_ARG3_),`1',
 `R<?>$+<TMP>		$: TMPOK',
-`R<?>$+<TMP>		$#error $@ 4.4.3 $: _DNSBL_MSG_TMP_')
-ifelse(`X'_ARG2_,`Xquarantine',
-`R<?>$+		$#error $@ quarantine $: _DNSBL_SRV_',
-`X'_ARG2_,`Xdiscard',
-`R<?>$+		$#discard $: _DNSBL_SRV_',
-`R<?>$+		$#error $@ 5.7.1 $: _DNSBL_MSG_')
+`R<?>$+<TMP>		$#error $@ 4.7.1 $: _DNSBL_MSG_TMP_')
+R<?>$+			$#error $@ 5.7.1 $: _DNSBL_MSG_
 divert(-1)
@@ -1,6 +1,6 @@
 divert(-1)
 #
-# Copyright (c) 2000-2002, 2005-2007 Sendmail, Inc. and its suppliers.
+# Copyright (c) 2000-2002 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 #
 # By using this file, you agree to the terms and conditions set
@@ -9,28 +9,19 @@ divert(-1)
 #
 #

-ifelse(defn(`_ARG_'), `', 
-	`errprint(`*** ERROR: missing argument for FEATURE(`enhdnsbl')')')
 divert(0)
 ifdef(`_EDNSBL_R_',`dnl',`dnl
-VERSIONID(`$Id: enhdnsbl.m4,v 1.12 2007/01/08 18:22:05 ca Exp $')
+VERSIONID(`$Id: enhdnsbl.m4,v 1.9 2002/05/19 21:27:29 gshapiro Exp $')
 LOCAL_CONFIG
 define(`_EDNSBL_R_',`')dnl
 # map for enhanced DNS based blacklist lookups
 Kednsbl dns -R A -a. -T<TMP> -r`'ifdef(`EDNSBL_TO',`EDNSBL_TO',`5')
 ')
 divert(-1)
-define(`_EDNSBL_SRV_', `_ARG_')dnl
-define(`_EDNSBL_MSG_',
-	`ifelse(len(X`'_ARG2_),`1',`"550 Rejected: " $`'&{client_addr} " listed at '_EDNSBL_SRV_`"',
-		X`'_ARG2_,`Xquarantine',`_EDNSBL_SRV_',
-		`_ARG2_')')dnl
+define(`_EDNSBL_SRV_', `ifelse(len(X`'_ARG_),`1',`blackholes.mail-abuse.org',_ARG_)')dnl
+define(`_EDNSBL_MSG_', `ifelse(len(X`'_ARG2_),`1',`"550 Rejected: " $`'&{client_addr} " listed at '_EDNSBL_SRV_`"',`_ARG2_')')dnl
 define(`_EDNSBL_MSG_TMP_', `ifelse(_ARG3_,`t',`"451 Temporary lookup failure of " $`'&{client_addr} " at '_EDNSBL_SRV_`"',`_ARG3_')')dnl
 define(`_EDNSBL_MATCH_', `ifelse(len(X`'_ARG4_),`1',`$`'+',_ARG4_)')dnl
-define(`_EDNSBL_ACTION_',
-	`ifelse(X`'_ARG2_,`Xquarantine',`$`'#error $`'@ quarantine',
-		X`'_ARG2_,`Xdiscard',`$`'#discard',
-		`$`'#error $`'@ 5.7.1')')dnl
 divert(8)
 # DNS based IP address spam list _EDNSBL_SRV_
 R$*			$: $&{client_addr}
@@ -38,16 +29,16 @@ R$-.$-.$-.$-		$: <?> $(ednsbl $4.$3.$2.$1._EDNSBL_SRV_. $: OK $)
 R<?>OK			$: OKSOFAR
 ifelse(len(X`'_ARG3_),`1',
 `R<?>$+<TMP>		$: TMPOK',
-`R<?>$+<TMP>		$#error $@ 4.4.3 $: _EDNSBL_MSG_TMP_')
-R<?>_EDNSBL_MATCH_	_EDNSBL_ACTION_ $: _EDNSBL_MSG_
+`R<?>$+<TMP>		$#error $@ 4.7.1 $: _EDNSBL_MSG_TMP_')
+R<?>_EDNSBL_MATCH_	$#error $@ 5.7.1 $: _EDNSBL_MSG_
 ifelse(len(X`'_ARG5_),`1',`dnl',
-`R<?>_ARG5_		_EDNSBL_ACTION_ $: _EDNSBL_MSG_')
+`R<?>_ARG5_	$#error $@ 5.7.1 $: _EDNSBL_MSG_')
 ifelse(len(X`'_ARG6_),`1',`dnl',
-`R<?>_ARG6_		_EDNSBL_ACTION_ $: _EDNSBL_MSG_')
+`R<?>_ARG6_	$#error $@ 5.7.1 $: _EDNSBL_MSG_')
 ifelse(len(X`'_ARG7_),`1',`dnl',
-`R<?>_ARG7_		_EDNSBL_ACTION_ $: _EDNSBL_MSG_')
+`R<?>_ARG7_	$#error $@ 5.7.1 $: _EDNSBL_MSG_')
 ifelse(len(X`'_ARG8_),`1',`dnl',
-`R<?>_ARG8_		_EDNSBL_ACTION_ $: _EDNSBL_MSG_')
+`R<?>_ARG8_	$#error $@ 5.7.1 $: _EDNSBL_MSG_')
 ifelse(len(X`'_ARG9_),`1',`dnl',
-`R<?>_ARG9_		_EDNSBL_ACTION_ $: _EDNSBL_MSG_')
+`R<?>_ARG9_	$#error $@ 5.7.1 $: _EDNSBL_MSG_')
 divert(-1)
@@ -1,6 +1,6 @@
 divert(-1)
 #
-# Copyright (c) 1999-2002, 2004, 2007 Sendmail, Inc. and its suppliers.
+# Copyright (c) 1999-2002, 2004 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 #
 # By using this file, you agree to the terms and conditions set
@@ -10,7 +10,7 @@ divert(-1)
 #

 divert(0)
-VERSIONID(`$Id: ldap_routing.m4,v 8.15 2007/05/01 17:38:25 ca Exp $')
+VERSIONID(`$Id: ldap_routing.m4,v 8.14 2004/02/18 02:45:11 gshapiro Exp $')
 divert(-1)

 # Check first two arguments.  If they aren't set, may need to warn in proto.m4
@@ -1,6 +1,6 @@
 divert(-1)
 #
-# Copyright (c) 2004, 2005 Sendmail, Inc. and its suppliers.
+# Copyright (c) 2004 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 #
 # By using this file, you agree to the terms and conditions set
@@ -11,7 +11,7 @@ divert(-1)

 divert(0)
 ifdef(`_MTAMARK_R',`dnl',`dnl
-VERSIONID(`$Id: mtamark.m4,v 1.2 2005/07/25 20:56:53 ca Exp $')
+VERSIONID(`$Id: mtamark.m4,v 1.1 2004/03/22 19:22:40 ca Exp $')
 LOCAL_CONFIG
 define(`_MTAMARK_R',`')dnl
 # map for MTA mark
@@ -29,5 +29,5 @@ R<?>1.		$: OKSOFAR
 R<?>0.		$#error $@ 5.7.1 $: _MTAMARK_MSG_
 ifelse(len(X`'_ARG2_),`1',
 `R<?>$+<TMP>	$: TMPOK',
-`R<?>$+<TMP>	$#error $@ 4.4.3 $: _MTAMARK_MSG_TMP_')
+`R<?>$+<TMP>	$#error $@ 4.7.1 $: _MTAMARK_MSG_TMP_')
 divert(-1)
@@ -1,16 +0,0 @@
-divert(-1)
-#
-# Copyright (c) 2006 Sendmail, Inc. and its suppliers.
-#	All rights reserved.
-#
-# By using this file, you agree to the terms and conditions set
-# forth in the LICENSE file which can be found at the top level of
-# the sendmail distribution.
-#
-#
-
-divert(0)dnl
-VERSIONID(`$Id: require_rdns.m4,v 1.1 2006/06/15 22:49:30 ca Exp $')
-divert(-1)
-
-define(`_REQUIRE_RDNS_', `')
@@ -1,6 +1,6 @@
 divert(-1)
 #
-# Copyright (c) 1998-2007 Sendmail, Inc. and its suppliers.
+# Copyright (c) 1998-2004 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 # Copyright (c) 1983, 1995 Eric P. Allman.  All rights reserved.
 # Copyright (c) 1988, 1993
@@ -13,7 +13,7 @@ divert(-1)
 #
 divert(0)

-VERSIONID(`$Id: proto.m4,v 8.732 2007/04/20 00:53:30 ca Exp $')
+VERSIONID(`$Id: proto.m4,v 8.710 2004/07/27 17:32:48 ca Exp $')

 # level CF_LEVEL config file format
 V`'CF_LEVEL/ifdef(`VENDOR_NAME', `VENDOR_NAME', `Berkeley')
@@ -388,7 +388,7 @@ _OPTION(QueueSortOrder, `confQUEUE_SORT_ORDER', `priority')
 _OPTION(MinQueueAge, `confMIN_QUEUE_AGE', `30m')

 # how many jobs can you process in the queue?
-_OPTION(MaxQueueRunSize, `confMAX_QUEUE_RUN_SIZE', `0')
+_OPTION(MaxQueueRunSize, `confMAX_QUEUE_RUN_SIZE', `10000')

 # perform initial split of envelope without checking MX records
 _OPTION(FastSplit, `confFAST_SPLIT', `1')
@@ -396,11 +396,12 @@ _OPTION(FastSplit, `confFAST_SPLIT', `1')
 # queue directory
 O QueueDirectory=ifdef(`QUEUE_DIR', QUEUE_DIR, `/var/spool/mqueue')

-# key for shared memory; 0 to turn off, -1 to auto-select
+# key for shared memory; 0 to turn off
 _OPTION(SharedMemoryKey, `confSHARED_MEMORY_KEY', `0')

-# file to store auto-selected key for shared memory (SharedMemoryKey = -1)
-_OPTION(SharedMemoryKeyFile, `confSHARED_MEMORY_KEY_FILE', `')
+ifdef(`confSHARED_MEMORY_KEY_FILE', `dnl
+# file to store key for shared memory (if SharedMemoryKey = -1)
+O SharedMemoryKeyFile=confSHARED_MEMORY_KEY_FILE')

 # timeouts (many of these)
 _OPTION(Timeout.initial, `confTO_INITIAL', `5m')
@@ -451,7 +452,7 @@ _OPTION(DontPruneRoutes, `confDONT_PRUNE_ROUTES', `False')
 _OPTION(SuperSafe, `confSAFE_QUEUE', `True')

 # status file
-_OPTION(StatusFile, `STATUS_FILE')
+O StatusFile=ifdef(`STATUS_FILE', `STATUS_FILE', `MAIL_SETTINGS_DIR`'statistics')

 # time zone handling:
 #  if undefined, use system default
@@ -510,7 +511,7 @@ _OPTION(ClassFactor, `confWORK_CLASS_FACTOR', `1800')
 _OPTION(RetryFactor, `confWORK_TIME_FACTOR', `90000')

 # default character set
-_OPTION(DefaultCharSet, `confDEF_CHAR_SET', `unknown-8bit')
+_OPTION(DefaultCharSet, `confDEF_CHAR_SET', `iso-8859-1')

 # service switch file (name hardwired on Solaris, Ultrix, OSF/1, others)
 _OPTION(ServiceSwitchFile, `confSERVICE_SWITCH_FILE', `MAIL_SETTINGS_DIR`'service.switch')
@@ -519,13 +520,13 @@ _OPTION(ServiceSwitchFile, `confSERVICE_SWITCH_FILE', `MAIL_SETTINGS_DIR`'servic
 _OPTION(HostsFile, `confHOSTS_FILE', `/etc/hosts')

 # dialup line delay on connection failure
-_OPTION(DialDelay, `confDIAL_DELAY', `0s')
+_OPTION(DialDelay, `confDIAL_DELAY', `10s')

 # action to take if there are no recipients in the message
-_OPTION(NoRecipientAction, `confNO_RCPT_ACTION', `none')
+_OPTION(NoRecipientAction, `confNO_RCPT_ACTION', `add-to-undisclosed')

 # chrooted environment for writing to files
-_OPTION(SafeFileEnvironment, `confSAFE_FILE_ENV', `')
+_OPTION(SafeFileEnvironment, `confSAFE_FILE_ENV', `/arch')

 # are colons OK in addresses?
 _OPTION(ColonOkInAddr, `confCOLON_OK_IN_ADDR', `True')
@@ -564,9 +565,6 @@ ifdef(`confUNSAFE_GROUP_WRITES',
 # where do errors that occur when sending errors get sent?
 _OPTION(DoubleBounceAddress, `confDOUBLE_BOUNCE_ADDRESS', `postmaster')

-# issue temporary errors (4xy) instead of permanent errors (5xy)?
-_OPTION(SoftBounce, `confSOFT_BOUNCE', `False')
-
 # where to save bounces if all else fails
 _OPTION(DeadLetterDrop, `confDEAD_LETTER_DROP', `/var/tmp/dead.letter')

@@ -650,9 +648,7 @@ _OPTION(Milter.macros.connect, `confMILTER_MACROS_CONNECT', `')
 _OPTION(Milter.macros.helo, `confMILTER_MACROS_HELO', `')
 _OPTION(Milter.macros.envfrom, `confMILTER_MACROS_ENVFROM', `')
 _OPTION(Milter.macros.envrcpt, `confMILTER_MACROS_ENVRCPT', `')
-_OPTION(Milter.macros.eom, `confMILTER_MACROS_EOM', `')
-_OPTION(Milter.macros.eoh, `confMILTER_MACROS_EOH', `')
-_OPTION(Milter.macros.data, `confMILTER_MACROS_DATA', `')')
+_OPTION(Milter.macros.eom, `confMILTER_MACROS_EOM', `')')

 # CA directory
 _OPTION(CACertPath, `confCACERT_PATH', `')
@@ -673,12 +669,6 @@ _OPTION(DHParameters, `confDH_PARAMETERS', `')
 # Random data source (required for systems without /dev/urandom under OpenSSL)
 _OPTION(RandFile, `confRAND_FILE', `')

-# Maximum number of "useless" commands before slowing down
-_OPTION(MaxNOOPCommands, `confMAX_NOOP_COMMANDS', `20')
-
-# Name to use for EHLO (defaults to $j)
-_OPTION(HeloName, `confHELO_NAME')
-
 ############################
 `# QUEUE GROUP DEFINITIONS  #'
 ############################
@@ -1792,14 +1782,6 @@ ifdef(`_CONN_CONTROL_IMMEDIATE_',`',`dnl
 dnl workspace: ignored...
 R$*		$: $>"ConnControl" dummy')', `dnl')
 undivert(8)
-ifdef(`_REQUIRE_RDNS_', `dnl
-R$*			$: $&{client_addr} $| $&{client_resolve}
-R$=R $*			$@ RELAY		We relay for these
-R$* $| OK		$@ OK			Resolves.
-R$* $| FAIL		$#error $@ 5.7.1 $: 550 Fix reverse DNS for $1
-R$* $| TEMP		$#error $@ 4.1.8 $: 451 Client IP address $1 does not resolve
-R$* $| FORGED		$#error $@ 4.1.8 $: 451 Possibly forged hostname for $1
-', `dnl')

 ######################################################################
 ###  check_mail -- check SMTP ``MAIL FROM:'' command argument
@@ -1925,7 +1907,7 @@ R<? $+> $*		$#error $@ 5.5.4 $: "_CODE553 Domain name required for sender addres
 							...remote is not')
 # check results
 R<?> $*			$: @ $1		mark address: nothing known about it
-R<$={ResOk}> $*		$: @ $2		domain ok
+R<$={ResOk}> $*		$@ <_RES_OK_>	domain ok: stop
 R<TEMP> $*		$#error $@ 4.1.8 $: "451 Domain of sender address " $&f " does not resolve"
 R<PERM> $*		$#error $@ 5.1.8 $: "_CODE553 Domain of sender address " $&f " does not exist"
 ifdef(`_ACCESS_TABLE_', `dnl
@@ -1940,34 +1922,6 @@ ifdef(`_ATMPF_', `R<_ATMPF_> $*		$#error $@ 4.3.0 $: "451 Temporary system failu
 dnl generic error from access map
 R<$+> $*		$#error $: $1		error from access db',
 `dnl')
-dnl workspace: @ CanonicalAddress (i.e. address in canonical form localpart<@host>)
-
-ifdef(`_BADMX_CHK_', `dnl
-R@ $*<@$+>$*		$: $1<@$2>$3 $| $>BadMX $2
-R$* $| $#$*		$#$2
-
-SBadMX
-# Look up MX records and ferret away a copy of the original address.
-# input: domain part of address to check
-R$+				$:<MX><$1><:$(mxlist $1$):><:>
-# workspace: <MX><domain><: mxlist-result $><:>
-R<MX><$+><:$*<TEMP>:><$*>	$#error $@ 4.1.2 $: "450 MX lookup failure for "$1
-# workspace: <MX> <original destination> <unchecked mxlist> <checked mxlist>
-# Recursively run badmx check on each mx.
-R<MX><$*><:$+:$*><:$*>		<MX><$1><:$3><: $4 $(badmx $2 $):>
-# See if any of them fail.
-R<MX><$*><$*><$*<BADMX>:$*>	$#error $@ 5.1.2 $:"550 Illegal MX record for recipient host "$1
-# Reverse the mxlists so we can use the same argument order again.
-R<MX><$*><$*><$*>		$:<MX><$1><$3><$2>
-R<MX><$*><:$+:$*><:$*>		<MX><$1><:$3><:$4 $(dnsA $2 $) :>
-
-# Reverse the lists so we can use the same argument order again.
-R<MX><$*><$*><$*>		$:<MX><$1><$3><$2>
-R<MX><$*><:$+:$*><:$*>		<MX><$1><:$3><:$4 $(BadMXIP $2 $) :>
-
-R<MX><$*><$*><$*<BADMXIP>:$*>	$#error $@ 5.1.2 $:"550 Invalid MX record for recipient host "$1',
-`dnl')
-

 ######################################################################
 ###  check_rcpt -- check SMTP ``RCPT TO:'' command argument
@@ -2005,7 +1959,7 @@ R<@> < $* @ $+ . $+ >	$: < $1 @ $2 . $3 >
 dnl prepend daemon_flags
 R<@> $*			$: $&{daemon_flags} $| <@> $1
 dnl workspace: ${daemon_flags} $| <@> <address>
-dnl _r_equire qual.rcpt: ok
+dnl 'r'equire qual.rcpt: ok
 R$* r $* $| <@> < $+ @ $+ >	$: < $3 @ $4 >
 dnl do not allow these at all or only from local systems?
 R$* r $* $| <@> < $* >	$: < ? $&{client_name} > < $3 >
@@ -2358,7 +2312,6 @@ ifdef(`_SPAM_HATER_',
 R<HATER> $+		$: $1			spam hater: continue checks
 R<$*> $+		$@ $>"Delay_TLS_Clt2" NOSPAMHATER	everyone else: stop
 dnl',`dnl')
-
 dnl run further checks: check_mail
 dnl should we "clean up" $&f?
 ifdef(`_FFR_MAIL_MACRO',
@@ -2372,27 +2325,6 @@ R$* $| $#$*		$#$2
 R$* $| $*		$: $1
 ', `dnl')

-ifdef(`_BLOCK_BAD_HELO_', `dnl
-R$*			$: $1 $| <$&{auth_authen}>	Get auth info
-dnl Bypass the test for users who have authenticated.
-R$* $| <$+>		$: $1				skip if auth
-R$* $| <$*>		$: $1 $| <$&{client_addr}> [$&s]	Get connection info
-dnl Bypass for local clients -- IP address starts with $=R
-R$* $| <$=R $*> [$*]	$: $1				skip if local client
-dnl Bypass a "sendmail -bs" session, which use 0 for client ip address
-R$* $| <0> [$*]		$: $1				skip if sendmail -bs
-dnl Reject our IP - assumes "[ip]" is in class $=w
-R$* $| <$*> $=w		$#error $@ 5.7.1 $:"550 bogus HELO name used: " $&s
-dnl Reject our hostname
-R$* $| <$*> [$=w]	$#error $@ 5.7.1 $:"550 bogus HELO name used: " $&s
-dnl Pass anything else with a "." in the domain parameter
-R$* $| <$*> [$+.$+]	$: $1				qualified domain ok
-dnl Reject if there was no "." or only an initial or final "."
-R$* $| <$*> [$*]	$#error $@ 5.7.1 $:"550 bogus HELO name used: " $&s
-dnl Clean up the workspace
-R$* $| $*		$: $1
-', `dnl')
-
 ifdef(`_ACCESS_TABLE_', `dnl', `divert(-1)')
 ######################################################################
 ###  F: LookUpFull -- search for an entry in access database
@@ -2766,11 +2698,6 @@ RSOFTWARE $| <$-:$+> $* 	$#error $@ $2 $: $1 " TLS handshake failed."
 dnl no <reply:dns> i.e. not requirements in the access map
 dnl use default error
 RSOFTWARE $| $* 		$#error $@ ifdef(`TLS_PERM_ERR', `5.7.0', `4.7.0') $: "ifdef(`TLS_PERM_ERR', `503', `403') TLS handshake failed."
-# deal with TLS protocol errors: abort
-RPROTOCOL $| <$-:$+> $* 	$#error $@ $2 $: $1 " STARTTLS failed."
-dnl no <reply:dns> i.e. not requirements in the access map
-dnl use default error
-RPROTOCOL $| $* 		$#error $@ ifdef(`TLS_PERM_ERR', `5.7.0', `4.7.0') $: "ifdef(`TLS_PERM_ERR', `503', `403') STARTTLS failed."
 R$* $| <$*> <VERIFY>		$: <$2> <VERIFY> <> $1
 dnl separate optional requirements
 R$* $| <$*> <VERIFY + $+>	$: <$2> <VERIFY> <$3> $1
@@ -2962,9 +2889,9 @@ ifdef(`_ATMPF_', `dnl tempfail?
 R<$* _ATMPF_>	$#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."', `dnl')
 dnl use the generic routine (for now)
 R<0>		$@ OK		no limit
-R<$+>		$: <$1> $| $(arith l $@ $1 $@ $&{client_rate} $)
+R<$+>		$: <$1> $| $(arith l $@ $&{client_rate} $@ $1 $)
 dnl log this? Connection rate $&{client_rate} exceeds limit $1.
-R<$+> $| TRUE	$#error $@ 4.3.2 $: _RATE_CONTROL_REPLY Connection rate limit exceeded.
+R<$+> $| FALSE	$#error $@ 4.3.2 $: _RATE_CONTROL_REPLY Connection rate limit exceeded.
 ')')

 ifdef(`_CONN_CONTROL_',`dnl
@@ -2984,9 +2911,9 @@ ifdef(`_ATMPF_', `dnl tempfail?
 R<$* _ATMPF_>	$#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."', `dnl')
 dnl use the generic routine (for now)
 R<0>		$@ OK		no limit
-R<$+>		$: <$1> $| $(arith l $@ $1 $@ $&{client_connections} $)
+R<$+>		$: <$1> $| $(arith l $@ $&{client_connections} $@ $1 $)
 dnl log this: Open connections $&{client_connections} exceeds limit $1.
-R<$+> $| TRUE	$#error $@ 4.3.2 $: _CONN_CONTROL_REPLY Too many open connections.
+R<$+> $| FALSE	$#error $@ 4.3.2 $: _CONN_CONTROL_REPLY Too many open connections.
 ')')

 undivert(9)dnl LOCAL_RULESETS
@@ -1,6 +1,6 @@
 divert(-1)
 #
-# Copyright (c) 1998-2007 Sendmail, Inc. and its suppliers.
+# Copyright (c) 1998-2004 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 # Copyright (c) 1983 Eric P. Allman.  All rights reserved.
 # Copyright (c) 1988, 1993
@@ -11,8 +11,8 @@ divert(-1)
 # the sendmail distribution.
 #
 #
-VERSIONID(`$Id: version.m4,v 8.186 2007/10/31 16:04:13 ca Exp $')
+VERSIONID(`$Id: version.m4,v 8.117 2004/07/30 18:03:07 ca Exp $')
 #
 divert(0)
 # Configuration version number
-DZ8.14.2`'ifdef(`confCF_VERSION', `/confCF_VERSION')
+DZ8.13.1`'ifdef(`confCF_VERSION', `/confCF_VERSION')
@@ -1,6 +1,6 @@
 PUSHDIVERT(-1)
 #
-# Copyright (c) 1998-2000, 2004 Sendmail, Inc. and its suppliers.
+# Copyright (c) 1998-2000 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 # Copyright (c) 1983 Eric P. Allman.  All rights reserved.
 # Copyright (c) 1988, 1993
@@ -32,7 +32,7 @@ POPDIVERT
 ###   Local and Program Mailer specification   ###
 ##################################################

-VERSIONID(`$Id: local.m4,v 8.59 2004/11/23 00:37:25 ca Exp $')
+VERSIONID(`$Id: local.m4,v 8.58 2000/10/26 01:58:29 ca Exp $')

 #
 #  Envelope sender rewriting
@@ -88,6 +88,6 @@ R$+			$@ $1 < @ *LOCAL* >	add local qualification',
 Mlocal,		P=LOCAL_MAILER_PATH, F=_MODMF_(CONCAT(_DEF_LOCAL_MAILER_FLAGS, LOCAL_MAILER_FLAGS), `LOCAL'), LOCAL_RWR,_OPTINS(`LOCAL_MAILER_EOL', ` E=', `, ')
 		_OPTINS(`LOCAL_MAILER_MAX', `M=', `, ')_OPTINS(`LOCAL_MAILER_MAXMSGS', `m=', `, ')_OPTINS(`LOCAL_MAILER_MAXRCPTS', `r=', `, ')_OPTINS(`LOCAL_MAILER_CHARSET', `C=', `, ')T=DNS/RFC822/LOCAL_MAILER_DSN_DIAGNOSTIC_CODE,_LOCAL_QGRP
 		A=LOCAL_MAILER_ARGS
-Mprog,		P=LOCAL_SHELL_PATH, F=_MODMF_(CONCAT(_DEF_LOCAL_SHELL_FLAGS, LOCAL_SHELL_FLAGS), `SHELL'), S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, D=LOCAL_SHELL_DIR,
+Mprog,		P=LOCAL_SHELL_PATH, F=CONCAT(_DEF_LOCAL_SHELL_FLAGS, LOCAL_SHELL_FLAGS), S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, D=LOCAL_SHELL_DIR,
 		_OPTINS(`LOCAL_MAILER_MAX', `M=', `, ')T=X-Unix/X-Unix/X-Unix,_PROG_QGRP
 		A=LOCAL_SHELL_ARGS
@@ -1,6 +1,6 @@
 PUSHDIVERT(-1)
 #
-# Copyright (c) 1998-2001, 2006 Sendmail, Inc. and its suppliers.
+# Copyright (c) 1998-2001 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 # Copyright (c) 1983 Eric P. Allman.  All rights reserved.
 # Copyright (c) 1988, 1993
@@ -13,8 +13,6 @@ PUSHDIVERT(-1)
 #
 _DEFIFNOT(`_DEF_SMTP_MAILER_FLAGS', `mDFMuX')
 _DEFIFNOT(`SMTP_MAILER_FLAGS',`')
-_DEFIFNOT(`SMTP_MAILER_LL',`990')
-_DEFIFNOT(`RELAY_MAILER_LL',`2040')
 _DEFIFNOT(`RELAY_MAILER_FLAGS', `SMTP_MAILER_FLAGS')
 ifdef(`SMTP_MAILER_ARGS',, `define(`SMTP_MAILER_ARGS', `TCP $h')')
 ifdef(`ESMTP_MAILER_ARGS',, `define(`ESMTP_MAILER_ARGS', `TCP $h')')
@@ -31,7 +29,7 @@ POPDIVERT
 ###   SMTP Mailer specification   ###
 #####################################

-VERSIONID(`$Id: smtp.m4,v 8.65 2006/07/12 21:08:10 ca Exp $')
+VERSIONID(`$Id: smtp.m4,v 8.64 2001/04/03 01:52:54 gshapiro Exp $')

 #
 #  common sender and masquerading recipient rewriting
@@ -107,18 +105,18 @@ SMasqRelay
 R$+			$: $>MasqSMTP $1
 R$+			$: $>MasqHdr $1

-Msmtp,		P=[IPC], F=_MODMF_(CONCAT(_DEF_SMTP_MAILER_FLAGS, SMTP_MAILER_FLAGS), `SMTP'), S=EnvFromSMTP/HdrFromSMTP, R=ifdef(`_ALL_MASQUERADE_', `EnvToSMTP/HdrFromSMTP', `EnvToSMTP'), E=\r\n, L=SMTP_MAILER_LL,
+Msmtp,		P=[IPC], F=_MODMF_(CONCAT(_DEF_SMTP_MAILER_FLAGS, SMTP_MAILER_FLAGS), `SMTP'), S=EnvFromSMTP/HdrFromSMTP, R=ifdef(`_ALL_MASQUERADE_', `EnvToSMTP/HdrFromSMTP', `EnvToSMTP'), E=\r\n, L=990,
 		_OPTINS(`SMTP_MAILER_MAX', `M=', `, ')_OPTINS(`SMTP_MAILER_MAXMSGS', `m=', `, ')_OPTINS(`SMTP_MAILER_MAXRCPTS', `r=', `, ')_OPTINS(`SMTP_MAILER_CHARSET', `C=', `, ')T=DNS/RFC822/SMTP,_SMTP_QGRP
 		A=SMTP_MAILER_ARGS
-Mesmtp,		P=[IPC], F=_MODMF_(CONCAT(_DEF_SMTP_MAILER_FLAGS, `a', SMTP_MAILER_FLAGS), `ESMTP'), S=EnvFromSMTP/HdrFromSMTP, R=ifdef(`_ALL_MASQUERADE_', `EnvToSMTP/HdrFromSMTP', `EnvToSMTP'), E=\r\n, L=SMTP_MAILER_LL,
+Mesmtp,		P=[IPC], F=_MODMF_(CONCAT(_DEF_SMTP_MAILER_FLAGS, `a', SMTP_MAILER_FLAGS), `ESMTP'), S=EnvFromSMTP/HdrFromSMTP, R=ifdef(`_ALL_MASQUERADE_', `EnvToSMTP/HdrFromSMTP', `EnvToSMTP'), E=\r\n, L=990,
 		_OPTINS(`SMTP_MAILER_MAX', `M=', `, ')_OPTINS(`SMTP_MAILER_MAXMSGS', `m=', `, ')_OPTINS(`SMTP_MAILER_MAXRCPTS', `r=', `, ')_OPTINS(`SMTP_MAILER_CHARSET', `C=', `, ')T=DNS/RFC822/SMTP,_ESMTP_QGRP
 		A=ESMTP_MAILER_ARGS
-Msmtp8,		P=[IPC], F=_MODMF_(CONCAT(_DEF_SMTP_MAILER_FLAGS, `8', SMTP_MAILER_FLAGS), `SMTP8'), S=EnvFromSMTP/HdrFromSMTP, R=ifdef(`_ALL_MASQUERADE_', `EnvToSMTP/HdrFromSMTP', `EnvToSMTP'), E=\r\n, L=SMTP_MAILER_LL,
+Msmtp8,		P=[IPC], F=_MODMF_(CONCAT(_DEF_SMTP_MAILER_FLAGS, `8', SMTP_MAILER_FLAGS), `SMTP8'), S=EnvFromSMTP/HdrFromSMTP, R=ifdef(`_ALL_MASQUERADE_', `EnvToSMTP/HdrFromSMTP', `EnvToSMTP'), E=\r\n, L=990,
 		_OPTINS(`SMTP_MAILER_MAX', `M=', `, ')_OPTINS(`SMTP_MAILER_MAXMSGS', `m=', `, ')_OPTINS(`SMTP_MAILER_MAXRCPTS', `r=', `, ')_OPTINS(`SMTP_MAILER_CHARSET', `C=', `, ')T=DNS/RFC822/SMTP,_SMTP8_QGRP
 		A=SMTP8_MAILER_ARGS
-Mdsmtp,		P=[IPC], F=_MODMF_(CONCAT(_DEF_SMTP_MAILER_FLAGS, `a%', SMTP_MAILER_FLAGS), `DSMTP'), S=EnvFromSMTP/HdrFromSMTP, R=ifdef(`_ALL_MASQUERADE_', `EnvToSMTP/HdrFromSMTP', `EnvToSMTP'), E=\r\n, L=SMTP_MAILER_LL,
+Mdsmtp,		P=[IPC], F=_MODMF_(CONCAT(_DEF_SMTP_MAILER_FLAGS, `a%', SMTP_MAILER_FLAGS), `DSMTP'), S=EnvFromSMTP/HdrFromSMTP, R=ifdef(`_ALL_MASQUERADE_', `EnvToSMTP/HdrFromSMTP', `EnvToSMTP'), E=\r\n, L=990,
 		_OPTINS(`SMTP_MAILER_MAX', `M=', `, ')_OPTINS(`SMTP_MAILER_MAXMSGS', `m=', `, ')_OPTINS(`SMTP_MAILER_MAXRCPTS', `r=', `, ')_OPTINS(`SMTP_MAILER_CHARSET', `C=', `, ')T=DNS/RFC822/SMTP,_DSMTP_QGRP
 		A=DSMTP_MAILER_ARGS
-Mrelay,		P=[IPC], F=_MODMF_(CONCAT(_DEF_SMTP_MAILER_FLAGS, `a8', RELAY_MAILER_FLAGS), `RELAY'), S=EnvFromSMTP/HdrFromSMTP, R=ifdef(`_ALL_MASQUERADE_', `MasqSMTP/MasqRelay', `MasqSMTP'), E=\r\n, L=RELAY_MAILER_LL,
+Mrelay,		P=[IPC], F=_MODMF_(CONCAT(_DEF_SMTP_MAILER_FLAGS, `a8', RELAY_MAILER_FLAGS), `RELAY'), S=EnvFromSMTP/HdrFromSMTP, R=ifdef(`_ALL_MASQUERADE_', `MasqSMTP/MasqRelay', `MasqSMTP'), E=\r\n, L=2040,
 		_OPTINS(`RELAY_MAILER_CHARSET', `C=', `, ')_OPTINS(`RELAY_MAILER_MAXMSGS', `m=', `, ')_OPTINS(`SMTP_MAILER_MAXRCPTS', `r=', `, ')T=DNS/RFC822/SMTP,_RELAY_QGRP
 		A=RELAY_MAILER_ARGS
@@ -10,10 +10,9 @@ divert(-1)
 #

 divert(0)
-VERSIONID(`$Id: darwin.m4,v 8.4 2005/06/30 01:16:04 ca Exp $')
+VERSIONID(`$Id: darwin.m4,v 8.3 2002/03/05 01:55:40 ca Exp $')
 ifdef(`STATUS_FILE',, `define(`STATUS_FILE', `/var/log/sendmail.st')')dnl
 dnl turn on S flag for local mailer
 MODIFY_MAILER_FLAGS(`LOCAL', `+S')dnl
 ifdef(`LOCAL_MAILER_PATH',, `define(`LOCAL_MAILER_PATH', /usr/libexec/mail.local)')dnl
 ifdef(`UUCP_MAILER_ARGS',, `define(`UUCP_MAILER_ARGS', `uux - -r -z -a$g $h!rmail ($u)')')dnl
-define(`confDONT_BLAME_SENDMAIL', `AssumeSafeChown,GroupWritableDirPathSafe')dnl
@@ -1,20 +0,0 @@
-divert(-1)
-#
-# Copyright (c) 2001, 2004 Sendmail, Inc. and its suppliers.
-#	All rights reserved.
-#
-# By using this file, you agree to the terms and conditions set
-# forth in the LICENSE file which can be found at the top level of
-# the sendmail distribution.
-#
-#
-
-divert(0)
-VERSIONID(`$Id: dragonfly.m4,v 1.1 2004/08/06 03:54:05 gshapiro Exp $')
-ifdef(`STATUS_FILE',, `define(`STATUS_FILE', `/var/log/sendmail.st')')dnl
-dnl turn on S flag for local mailer
-MODIFY_MAILER_FLAGS(`LOCAL', `+S')dnl
-ifdef(`LOCAL_MAILER_PATH',, `define(`LOCAL_MAILER_PATH', /usr/libexec/mail.local)')dnl
-ifdef(`LOCAL_MAILER_ARGS',, `define(`LOCAL_MAILER_ARGS', `mail $u')')dnl
-ifdef(`UUCP_MAILER_PATH',, `define(`UUCP_MAILER_PATH', `/usr/local/bin/uux')')dnl
-ifdef(`UUCP_MAILER_ARGS',, `define(`UUCP_MAILER_ARGS', `uux - -r -z -a$g $h!rmail ($u)')')dnl
@@ -1,20 +0,0 @@
-divert(-1)
-#
-# Copyright (c) 2001 Sendmail, Inc. and its suppliers.
-#	All rights reserved.
-#
-# By using this file, you agree to the terms and conditions set
-# forth in the LICENSE file which can be found at the top level of
-# the sendmail distribution.
-#
-#
-
-divert(0)
-VERSIONID(`$Id: freebsd6.m4,v 1.1 2005/06/14 02:16:35 gshapiro Exp $')
-ifdef(`STATUS_FILE',, `define(`STATUS_FILE', `/var/log/sendmail.st')')dnl
-dnl turn on S flag for local mailer
-MODIFY_MAILER_FLAGS(`LOCAL', `+S')dnl
-ifdef(`LOCAL_MAILER_PATH',, `define(`LOCAL_MAILER_PATH', /usr/libexec/mail.local)')dnl
-ifdef(`LOCAL_MAILER_ARGS',, `define(`LOCAL_MAILER_ARGS', `mail $u')')dnl
-ifdef(`UUCP_MAILER_PATH',, `define(`UUCP_MAILER_PATH', `/usr/local/bin/uux')')dnl
-ifdef(`UUCP_MAILER_ARGS',, `define(`UUCP_MAILER_ARGS', `uux - -r -z -a$g $h!rmail ($u)')')dnl
@@ -1,16 +1,15 @@
-# Copyright (c) 2000-2002, 2005 Sendmail, Inc. and its suppliers.
+# Copyright (c) 2000-2002 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 #
 # By using this file, you agree to the terms and conditions set
 # forth in the LICENSE file which can be found at the top level of
 # the sendmail distribution.
 #
-# $Id: sendmail.schema,v 8.22 2005/09/16 20:18:14 ca Exp $
+# $Id: sendmail.schema,v 8.21 2002/11/20 23:13:50 gshapiro Exp $

 # Note that this schema is experimental at this point as it has had little
 # public review.  Therefore, it may change in future versions.  Feedback
-# via sendmail-YYYY@support.sendmail.org is encouraged (replace YYYY with
-# the current year, e.g., 2005).
+# via sendmail@sendmail.org is encouraged.

 # OID arcs for Sendmail
 # enterprise:		1.3.6.1.4.1
@@ -1,6 +1,6 @@
 #!/usr/bin/perl -w

-# Copyright (c) 1999-2004, 2007 Gregory Neil Shapiro.  All Rights Reserved.
+# Copyright (c) 1999-2003 Gregory Neil Shapiro.  All Rights Reserved.
 # 
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -27,7 +27,7 @@
 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 # SUCH DAMAGE.

-# $Id: buildvirtuser,v 1.8 2007/10/08 18:44:15 gshapiro Exp $
+# $Id: buildvirtuser,v 1.6 2003/03/15 23:30:09 gshapiro Exp $

 =head1 NAME

@@ -70,21 +70,30 @@ to take affect.

 =head1 EXAMPLES

-Here is an example file from the /etc/mail/virtusers/ directory:
+Here are some example files from the /etc/mail/virtusers/ directory:

-=head2 /etc/mail/virtusers/example.org:
+=head2 /etc/mail/virtusers/bsdunix.org:

 # Services
- MAILER-DAEMON	gshapiro+bounce.$DOMAIN@example.net
- postmaster	gshapiro+$LHS.$DOMAIN@example.net
- webmaster	gshapiro+$LHS.$DOMAIN@example.net
+ MAILER-DAEMON	gshapiro+bounce.$DOMAIN@gshapiro.net
+ postmaster	gshapiro+$LHS.$DOMAIN@gshapiro.net
+ webmaster	gshapiro+$LHS.$DOMAIN@gshapiro.net
 
 # Defaults
 		error:nouser No such user
 
 # Users
- gshapiro	gshapiro+$DOMAIN@example.net
- zoe		[email protected]
+ gshapiro	gshapiro+$DOMAIN@gshapiro.net
+ bob		[email protected]
+
+=head2 /etc/mail/virtusers/smtp.org:
+
+ # Defaults
+ 		[email protected]
+ 
+ # Users
+ john		[email protected]
+ nancy		[email protected]

 =head1 AUTHOR

@@ -93,7 +102,6 @@ Gregory Neil Shapiro E<lt>F<[email protected]>E<gt>
 =cut

 use strict;
-use File::stat;
 use Getopt::Std;

 my $makemap = "/usr/sbin/makemap";
@@ -109,18 +117,6 @@ my $newest = 0;
 my ($lhs, $domain, $key, $value);
 my $opts = {};

-sub preserve_perms ($$)
-{
-	my $old = shift;
-	my $new = shift;
-	my $st;
-
-	$st = stat($old);
-	return if (!defined($st));
-	chmod($st->mode, $new) || warn "Could not chmod($st->mode, $new): $!\n";
-	chown($st->uid, $st->gid, $new) || warn "Could not chmod($st->uid, $st->gid, $new): $!\n";
-}
-
 getopts('ft', $opts) || die "Usage: $0 [-f] [-t]\n";

 if ($opts->{t})
@@ -135,12 +131,9 @@ closedir(VIRTS) || die "Could not close directory $virts: $!\n";

 foreach $domain (@virts)
 {
-	next if ($domain =~ m/^\./);
 	open(DOMAIN, "$virts/$domain") || die "Could not open file $virts/$domain: $!\n";
 	my $line = 0;
-	my $mtime = 0;
-	my $st = stat("$virts/$domain");
-	$mtime = $st->mtime if (defined($st));
+	my $mtime = (stat(DOMAIN))[9] || 0;
 	if ($mtime > $newest)
 	{
 		$newest = $mtime;
@@ -167,7 +160,7 @@ LINE:	while (<DOMAIN>)
 		}
 		else
 		{
-			warn "Bogus line $line in $virts/$domain\n";
+			die "Bogus line $line in $virts/$domain\n";
 		}

 		# Variable subsitution
@@ -179,9 +172,7 @@ LINE:	while (<DOMAIN>)
 	close(DOMAIN) || die "Could not close $virts/$domain: $!\n";
 }

-my $virtmtime = 0;
-my $st = stat($virt);
-$virtmtime = $st->mtime if (defined($st));
+my $virtmtime = (stat($virt))[9] || 0;
 if ($opts->{f} || $virtmtime < $newest)
 {
 	print STDOUT "Rebuilding $virt\n";
@@ -200,17 +191,14 @@ if ($opts->{f} || $virtmtime < $newest)
 		print MAKEMAP "$key\t\t$virt{$key}\n";
 	}
 	close(MAKEMAP) || die "Could not close makemap ($?): $!\n";
-	preserve_perms($virt, $newvirt);
 	rename($newvirt, $virt) || die "Could not rename $newvirt to $virt: $!\n";

 	open(VIRTHOST, ">$newvirthosts") || die "Could not open file $newvirthosts: $!\n";
 	foreach $domain (sort @virts)
 	{
-		next if ($domain =~ m/^\./);
 		print VIRTHOST "$domain\n";
 	}
 	close(VIRTHOST) || die "Could not close $newvirthosts: $!\n";
-	preserve_perms($virthosts, $newvirthosts);
 	rename($newvirthosts, $virthosts) || die "Could not rename $newvirthosts to $virthosts: $!\n";
 }
 exit 0;
@@ -1,6 +1,6 @@
 #!/usr/bin/perl -w

-# $Id: cidrexpand,v 8.8 2006/08/07 17:18:37 ca Exp $
+# $Id: cidrexpand,v 8.4 2002/11/22 21:13:14 ca Exp $
 #
 # v 0.4
 #
@@ -28,21 +28,6 @@
 #     Added clarification in the notes for what to do if you have 
 #     exceptions to a larger CIDR block.
 #
-#  26 Jul 2006 Richard Rognlie ([email protected]>
-#     Added code to strip "comments" (anything after a non-escaped #)
-#     # characters after a \ or within quotes (single and double) are
-#     left intact. 
-#
-#     e.g.
-#	From:1.2.3.4	550 Die spammer # spammed us 2006.07.26
-#     becomes
-#	From:1.2.3.4	550 Die spammer 
-#
-#  3 August 2006
-#
-#     Corrected a bug to have it handle the special case of "0.0.0.0/0"
-#     since Net::CIDR doesn't handle it properly.
-#
 # usage: 
 #  cidrexpand < /etc/mail/access | makemap -r hash /etc/mail/access
 #
@@ -53,59 +38,32 @@

 use strict;
 use Net::CIDR;
-use Getopt::Std;
-
-our ($opt_c,$opt_t);
-getopts('ct:');

 my $spaceregex = '\s+';
-if ($opt_t)
+
+while (my $arg = shift @ARGV)
 {
-    $spaceregex = $opt_t;
+    if ($arg eq '-t')
+    {
+	$spaceregex = shift;
+    }
 }

+use strict;
+
+my $SENDMAIL = 1;
+
 while (<>)
 {
-    chomp;
    my ($prefix,$left,$right,$space);

-    if ( (/\#/) && $opt_c )
-    {
-	# print "checking...\n";
-	my $i;
-	my $qtype='';
-	for ($i=0 ; $i<length($_) ; $i++) 
-	{
-	    my $ch = substr($_,$i,1);
-	    if ($ch eq '\\') 
-	    {
-		$i++;
-		next;
-	    }
-	    elsif ($qtype eq '' && $ch eq '#') 
-	    {
-		substr($_,$i) = '';
-		last;
-	    }
-	    elsif ($qtype ne '' && $ch eq $qtype) 
-	    {
-		$qtype = '';
-	    }
-	    elsif ($qtype eq '' && $ch =~ /[\'\"]/) 
-	    {
-		$qtype = $ch;
-	    }
-	}
-    } 
-    
    if (! /^(|\S\S*:)(\d+\.){3}\d+\/\d\d?$spaceregex.*/ )
    {
-	print "$_\n";
+	print;
    }
    else
    {
-	($prefix,$left,$space,$right) = 
-	    /^(|\S\S*:)((?:\d+\.){3}\d+\/\d\d?)($spaceregex)(.*)$/;
+	($prefix,$left,$space,$right) = /^(|\S\S*:)((?:\d+\.){3}\d+\/\d\d?)($spaceregex)(.*)$/;
 	
 	my @new_lefts = expand_network($left);
 	foreach my $nl (@new_lefts)
@@ -122,8 +80,6 @@ sub expand_network
    my ($network,$mask) = split /\//, $left_input;
    if (defined $mask)
    {
-	return (0..255)	if $mask == 0;
-
 	my @parts = split /\./, $network;
 	while ($#parts < 3)
 	{
@@ -1,6 +1,6 @@
 divert(-1)
 #
-# Copyright (c) 2001-2002, 2005 Sendmail, Inc. and its suppliers.
+# Copyright (c) 2001-2002 Sendmail, Inc. and its suppliers.
 #	All rights reserved.
 #
 # By using this file, you agree to the terms and conditions set
@@ -59,7 +59,7 @@ dnl ##	address returned does not begin 127, then the mail is
 dnl ##	processed as if the HACK line were not present.

 divert(0)
-VERSIONID(`$Id: dnsblaccess.m4,v 1.6 2005/07/25 23:32:05 ca Exp $')
+VERSIONID(`$Id: dnsblaccess.m4,v 1.5 2002/05/19 21:30:06 gshapiro Exp $')
 ifdef(`_ACCESS_TABLE_', `dnl',
 	`errprint(`*** ERROR: dnsblaccess requires FEATURE(`access_db')
 ')')
@@ -85,7 +85,7 @@ R<?>$* $- .<>$*		<$(access _EDNSBL_KEY_`:'$1$2 $@$3 $@`'_EDNSBL_SRV_ $: ? $)> $1
 R<?>$* <>$*		$:<$(access _EDNSBL_KEY_`:' $@$2 $@`'_EDNSBL_SRV_ $: ? $)> <>$2
 ifelse(len(X`'_ARG3_),`1',
 `R<$*<TMPF>>$*		$: TMPOK',
-`R<$*<TMPF>>$*		$#error $@ 4.4.3 $: _EDNSBL_MSG_TMP_')
+`R<$*<TMPF>>$*		$#error $@ 4.7.1 $: _EDNSBL_MSG_TMP_')
 R<$={Accept}>$*		$: OKSOFAR
 R<ERROR:$-.$-.$-:$+> $*	$#error $@ $1.$2.$3 $: $4
 R<ERROR:$+> $*		$#error $: $1
@@ -3,7 +3,7 @@
 ## Copyright (c) 1998-2002 Sendmail, Inc. and its suppliers.
 ##	All rights reserved.
 ##
-## $Id: qtool.pl,v 8.29 2007/02/16 01:12:08 ca Exp $
+## $Id: qtool.pl,v 8.28 2002/06/27 23:06:16 gshapiro Exp $
 ##
 use strict;
 use File::Basename;
@@ -69,12 +69,6 @@ my $new_condition;
 my $qprefix;
 my $queuegroups = 0;
 my $conditions = new Compound();
-my $fcntl_struct = 's H60';
-my $fcntl_structlockp = pack($fcntl_struct, Fcntl::F_WRLCK,
-	"000000000000000000000000000000000000000000000000000000000000");
-my $fcntl_structunlockp = pack($fcntl_struct, Fcntl::F_UNLCK,
-	"000000000000000000000000000000000000000000000000000000000000");
-my $lock_both = -1;

 Getopt::Std::getopts('bC:de:Qs:', \%opts);

@@ -346,9 +340,7 @@ sub add_source
 ## 	Opens a file for read/write and uses flock to obtain a lock on the
 ##	file. The flock is Perl's flock which defaults to flock on systems
 ##	that support it. On systems without flock it falls back to fcntl
-##	locking.  This script will also call fcntl explicitly if flock
-##      uses BSD semantics (i.e. if both flock() and fcntl() can successfully
-##      lock the file at the same time)
+##	locking.
 ##
 ##	Parameters:
 ##		file_name -- The name of the file to open and lock.
@@ -366,24 +358,6 @@ sub lock_file
 	my $file_name = shift;
 	my $result;

-	if ($lock_both == -1)
-	{
-		if (open(DEVNULL, '>/dev/null'))
-		{
-			my $flock_status = flock(DEVNULL, Fcntl::LOCK_EX | Fcntl::LOCK_NB);
-			my $fcntl_status = fcntl (DEVNULL, Fcntl::F_SETLK, $fcntl_structlockp);
-			close(DEVNULL);
-
-			$lock_both = ($flock_status && $fcntl_status);
-		}
-		else
-		{
-			# Couldn't open /dev/null.  Windows system?
-			$lock_both = 0;
-		}
-	}
-
-
 	$result = sysopen(FILE_TO_LOCK, $file_name, Fcntl::O_RDWR);
 	if (!$result)
 	{
@@ -396,15 +370,6 @@ sub lock_file
 		return (undef, "Could not obtain lock on '$file_name': $!");
 	}

-	if ($lock_both)
-	{
-		my $result2 = fcntl (FILE_TO_LOCK, Fcntl::F_SETLK, $fcntl_structlockp);
-		if (!$result2)
-		{
-			return (undef, "Could not obtain fcntl lock on '$file_name': $!");
-		}
-	}
-
 	return (\*FILE_TO_LOCK, undef);
 }

@@ -431,14 +396,6 @@ sub unlock_file
 	{
 		return "Unlock failed on '$result': $!";
 	}
-	if ($lock_both)
-	{
-		my $result2 = fcntl ($file, Fcntl::F_SETLK, $fcntl_structunlockp);
-		if (!$result2)
-		{
-			return (undef, "Fcntl unlock failed on '$result': $!");
-		}
-	}

 	return undef;
 }
@@ -1,4 +1,4 @@
-#	$Id: Makefile,v 8.16 2006/01/05 22:03:31 ca Exp $
+#	$Id: Makefile,v 8.15 2004/07/20 20:25:10 ca Exp $

 DIR=		smm/08.sendmailop
 SRCS=		op.me
@@ -22,7 +22,6 @@ all: ${OBJS}
 op.ps: ${SRCS}
 	rm -f $@
 	${PIC} ${SRCS} | ${EQNPS} | ${ROFFPS} > $@
-	test -s $@ || ${ROFFPS} -p -e ${SRCS} > $@

 op.txt: ${SRCS}
 	rm -f $@
@@ -1,4 +1,4 @@
-.\" Copyright (c) 1998-2005 Sendmail, Inc. and its suppliers.
+.\" Copyright (c) 1998-2004 Sendmail, Inc. and its suppliers.
 .\"	All rights reserved.
 .\" Copyright (c) 1983, 1995 Eric P. Allman.  All rights reserved.
 .\" Copyright (c) 1983, 1993
@@ -9,7 +9,7 @@
 .\" the sendmail distribution.
 .\"
 .\"
-.\"	$Id: op.me,v 8.741 2007/06/22 23:08:59 ca Exp $
+.\"	$Id: op.me,v 8.699 2004/06/03 18:29:01 ca Exp $
 .\"
 .\" eqn op.me | pic | troff -me
 .\"
@@ -90,10 +90,10 @@ Sendmail, Inc.
 .de Ve
 Version \\$2
 ..
-.Ve $Revision: 8.741 $
+.Ve $Revision: 8.699 $
 .rm Ve
 .sp
-For Sendmail Version 8.14
+For Sendmail Version 8.13
 .)l
 .(f
 Sendmail is a trademark of Sendmail, Inc.
@@ -982,7 +982,7 @@ This should be a link to /usr/\*(SD/sendmail.
 .sh 3 "sendmail.pid"
 .pp
 .i sendmail
-stores its current pid in the file specified by the
+stores its current pid in the file specifed by the
 .b PidFile
 option (default is _PATH_SENDMAILPID).
 .i sendmail
@@ -1475,18 +1475,6 @@ option, so that it may be shared between several invocations of
 .i sendmail .
 This allows mail to be queued immediately or skipped during a queue run if
 there has been a recent failure in connecting to a remote machine.
-Note: information about a remote system is stored in a file
-whose pathname consists of the components of the hostname in reverse order.
-For example, the information for
-.b host.example.com
-is stored in
-.b com./example./host .
-For top-level domains like
-.b com
-this can create a large number of subdirectories
-which on some filesystems can exhaust some limits.
-Moreover, the performance of lookups in directory with thousands of entries
-can be fairly slow depending on the filesystem implementation.
 .pp
 Additionally enabling
 .b SingleThreadDelivery
@@ -1633,7 +1621,7 @@ the
 .i address
 part of the triple is looked up as the key
 (i.e., the left hand side)
-in the alias database.
+into the alias database.
 If there is a match, the address is deleted from the send queue
 and all addresses on the right hand side of the alias
 are added in place of the alias that was found.
@@ -3928,11 +3916,6 @@ The complete syntax for ruleset 0 is:
 This specifies the
 {mailer, host, user}
 3-tuple necessary to direct the mailer.
-Note: the third element (
-.i user
-) is often also called
-.i address
-part.
 If the mailer is local
 the host part may be omitted\**.
 .(f
@@ -4259,13 +4242,6 @@ It can accept or reject mail transfer between these two addresses
 much like the
 .i checkcompat()
 function.
-Note:
-while other
-.i check_*
-rulesets are invoked during the SMTP mail receiption stage
-(i.e., in the SMTP server),
-.i check_compat
-is invoked during the mail delivery stage.
 .sh 4 "check_eoh"
 .pp
 The
@@ -4317,13 +4293,6 @@ Keep in mind the Message-Id: header is not a required header and
 is not a guaranteed spam indicator.
 This ruleset is an example and
 should probably not be used in production.
-.sh 4 "check_eom"
-.pp
-The
-.i check_eom
-ruleset is called after the end of a message,
-its parameter is the message size.
-It can accept or reject the message.
 .sh 4 "check_etrn"
 .pp
 The
@@ -4812,8 +4781,7 @@ command line flag or by the SMTP server code.
 Sender's host name.
 Set from the
 .b \-p
-command line flag or by the SMTP server code
-(in which case it is set to the EHLO/HELO parameter).
+command line flag or by the SMTP server code.
 .ip $t
 A numeric representation of the current time in the format YYYYMMDDHHmm
 (4 digit year 1900-9999, 2 digit month 01-12, 2 digit day 01-31,
@@ -4841,6 +4809,9 @@ This macro contains up to three characters, the first
 is either `e' or `h' for envelope/header address,
 the second is a space,
 and the third is either `s' or `r' for sender/recipient address.
+Notice: for header addresses no distinction is currently made
+between sender and recipient addresses, i.e., the macro contains
+only `h'.
 .ip ${alg_bits}
 The maximum keylength (in bits) of the symmetric encryption algorithm
 used for a TLS connection.
@@ -4889,18 +4860,6 @@ IPv6 addresses are tagged with "IPv6:" before the address.
 Defined in the SMTP server only.
 .ip ${client_connections}
 The number of open connections in the SMTP server for the client IP address.
-.ip ${client_flags}
-The flags specified by the
-Modifier= part of
-.b ClientPortOptions
-where flags are separated from each other by spaces
-and upper case flags are doubled.
-That is,
-Modifier=hA
-will be represented as
-"h AA" in
-.b ${client_flags} ,
-which is required for testing the flags in rulesets.
 .ip ${client_name}
 The host name of the SMTP client.
 This may be the client's bracketed IP address
@@ -5555,7 +5514,7 @@ set to be the set of all names
 this host is known by.
 This can be used to match local hostnames.
 .ip $={persistentMacros}
-set to the macros that should be saved across queue runs.
+set to the macros would should be saved across queue runs.
 Care should be taken when adding macro names to this class.
 .pp
 .i Sendmail
@@ -5637,8 +5596,7 @@ Run Extended SMTP (ESMTP) protocol (defined in RFCs 1869, 1652, and 1870).
 This flag defaults on if the SMTP greeting message includes the word
 .q ESMTP .
 .ip A
-Look up the user (address) part of the resolved mailer triple,
-in the alias database.
+Look up the user part of the address in the alias database.
 Normally this is only set for local mailers.
 .ip b
 Force a blank line on the end of a message.
@@ -6689,7 +6647,6 @@ A running
 daemon can be controlled through this named socket.
 Available commands are:
 .i help,
-.i mstat,
 .i restart,
 .i shutdown,
 and
@@ -6735,11 +6692,6 @@ Listen	Size of listen queue (defaults to 10)
 Modifier	Options (flags) for the daemon
 SndBufSize	Size of TCP send buffer
 RcvBufSize	Size of TCP receive buffer
-children	maximum number of children per daemon, see \fBMaxDaemonChildren\fP.
-DeliveryMode	Delivery mode per daemon, see \fBDeliveryMode\fP.
-refuseLA	RefuseLA per daemon
-delayLA		DelayLA per daemon
-queueLA		QueueLA per daemon
 .)b
 The
 .i Name
@@ -6939,10 +6891,6 @@ The
 .b \-v
 command line flag sets this to
 .b i .
-Note: for internal reasons,
-``i'' does not work
-if a milter is enabled which can reject or delete recipients.
-In that case the mode will be changed to ``b''.
 .ip DialDelay=\fIsleeptime\fP
 [no short name]
 Dial-on-demand network connections can see timeouts
@@ -7209,9 +7157,11 @@ will search first in /var/forward/\c
 and then in
 .i ~username /.forward
 (but only if the first file does not exist).
-.ip HeloName=\fIname\fP
-[no short name]
-Set the name to be used for HELO/EHLO (instead of $j).
+.ip HelpFile=\fIfile\fP
+[H]
+Specify the help file
+for SMTP.
+If no file name is specified, "helpfile" is used.
 .ip HoldExpensive
 [c]
 If an outgoing mailer is marked as being expensive,
@@ -7325,18 +7275,8 @@ will refuse connections when it has more than
 .i N
 children processing incoming mail or automatic queue runs.
 This does not limit the number of outgoing connections.
-If the default
-.b DeliveryMode
-(background) is used, then
-.i sendmail
-may create an almost unlimited number of children
-(depending on the number of transactions and the
-relative execution times of mail receiption and mail delivery).
-If the limit should be enforced, then a
-.b DeliveryMode
-other than background must be used.
 If not set, there is no limit to the number of children --
-that is, the system load average controls this.
+that is, the system load averaging controls this.
 .ip MaxHeadersLength=\fIN\fP
 [no short name]
 The maximum length of the sum of all headers.
@@ -7377,13 +7317,6 @@ will be used.
 By default,
 these values are 2048 and 1024, respectively.
 To allow any length, a value of 0 can be specified.
-.ip MaxNOOPCommands=\fIN\fP
-Override the default of
-.b MAXNOOPCOMMANDS
-for the number of
-.i useless
-commands, see Section
-"Measures against Denial of Service Attacks".
 .ip MaxQueueChildren=\fIN\fP
 [no short name]
 When set, this limits the number of concurrent queue runner processes to
@@ -7423,16 +7356,6 @@ highest priority jobs)
 this should be set as high as possible to avoid
 .q losing
 jobs that happen to fall late in the queue directory.
-Note: this option also restricts the number of entries printed by
-.i mailq .
-That is, if
-.i MaxQueueRunSize
-is set to a value
-.b N
-larger than zero,
-then only
-.b N
-entries are printed per queue group.
 .ip MaxRecipientsPerMessage=\fIN\fP
 [no short name]
 The maximum number of recipients that will be accepted per message
@@ -7476,11 +7399,9 @@ after a certain event occurred.
 .(b
 .ta \w'envfrom'u+3n
 connect	After session connection start
-helo	After EHLO/HELO command
-envfrom	After MAIL From command
-envrcpt	After RCPT To command
-data	After DATA command.
-eoh	After DATA command and header
+helo	After HELO command
+envfrom	After MAIL FROM command
+envrcpt	After RCPT TO command
 eom	After DATA command and terminating ``.''
 .)b
 By default the lists of macros are empty.
@@ -7610,7 +7531,7 @@ The
 .i opt ions
 can be selected from:
 .(b
-.ta \w'noactualrecipient'u+3n
+.ta \w'needvrfyhelo'u+3n
 public	Allow open access
 needmailhelo	Insist on HELO or EHLO command before MAIL
 needexpnhelo	Insist on HELO or EHLO command before EXPN
@@ -7627,8 +7548,6 @@ nobodyreturn	Don't return the body of a message with DSNs
 goaway	Disallow essentially all SMTP status queries
 authwarnings	Put X-Authentication-Warning: headers in messages
 		and log warnings
-noactualrecipient	Don't put X-Actual-Recipient lines in DSNs
-		which reveal the actual account that addresses map to.
 .)b
 .(f
 \**N.B.:
@@ -7966,6 +7885,20 @@ UNIX-style
 lines at the front of headers.
 Normally they are assumed redundant
 and discarded.
+.ip SharedMemoryKey
+[no short name]
+Key to use for shared memory segment;
+if not set (or 0), shared memory will not be used.
+Requires support for shared memory to be compiled into
+.i sendmail .
+If this option is set,
+.i sendmail
+can share some data between different instances.
+For example, the number of entries in a queue directory
+or the available space in a file system.
+This allows for more efficient program execution, since only
+one process needs to update the data instead of each individual
+process gathering the data each time it is required.
 .ip SendMimeErrors
 [j]
 If set, send error messages in MIME format
@@ -8024,34 +7957,6 @@ The default file is
 [7]
 Strip input to seven bits for compatibility with old systems.
 This shouldn't be necessary.
-.ip SharedMemoryKey
-[no short name]
-Key to use for shared memory segment;
-if not set (or 0), shared memory will not be used.
-If set to
-1
-.i sendmail
-can select a key itself provided that also
-.b SharedMemoryKeyFile
-is set.
-Requires support for shared memory to be compiled into
-.i sendmail .
-If this option is set,
-.i sendmail
-can share some data between different instances.
-For example, the number of entries in a queue directory
-or the available space in a file system.
-This allows for more efficient program execution, since only
-one process needs to update the data instead of each individual
-process gathering the data each time it is required.
-.ip SharedMemoryKeyFile
-[no short name]
-If
-.b SharedMemoryKey
-is set to
-1
-then the automatically selected shared memory key will be stored
-in the specified file.
 .ip SingleLineFromHeader
 [no short name]
 If set, From: lines that have embedded newlines are unwrapped
@@ -8089,10 +7994,6 @@ option.
 The message printed when the SMTP server starts up.
 Defaults to
 .q "$j Sendmail $v ready at $b".
-.ip SoftBounce
-If set, issue temporary errors (4xy) instead of permanent errors (5xy).
-This can be useful during testing of a new configuration to avoid
-erroneous bouncing of mails.
 .ip StatusFile=\fIfile\fP
 [S]
 Log summary statistics in the named
@@ -8887,21 +8788,16 @@ R$\-	$: $(storage {MyMacro} $) $1
 .)b
 .ip arith
 Perform simple arithmetic operations.
-The operation is given as key, currently
-+, -, *, /, %,
+The operation is given as key, currently +, -, *, /, %,
 |, & (bitwise OR, AND),
-l (for less than), =,
-and r (for random) are supported.
+l (for less than), and = are supported.
 The two operands are given as arguments.
 The lookup returns the result of the computation,
-i.e.,
+i.e.
 .sm TRUE
 or
 .sm FALSE
 for comparisons, integer values otherwise.
-The r operator returns a pseudo-random number whose value
-lies between the first and second operand
-(which requires that the first operand is smaller than the second).
 All options which are possible for maps are ignored.
 A simple example is:
 .(b
@@ -8936,8 +8832,7 @@ The server responds with a status indicator and the result (if any):
 <status> ' ' <result>
 .)b

-The status indicator specifies the result of the lookup operation itself
-and is one of the following upper case words:
+The status indicator is one of the following upper case words:
 .(b
 .ta 9n
 OK	the key was found, result contains the looked up value
@@ -8949,19 +8844,13 @@ PERM	a permanent failure occured

 In case of errors (status TEMP, TIMEOUT or PERM) the result field may 
 contain an explanatory message.
-However, the explanatory message is not used any further by
-.i sendmail .

 Example replies:
 .(b
 31:OK [email protected],
 .)b

-.(b
-56:OK error:550 5.7.1 User does not accept mail from sender,
-.)b
-
-in case of successful lookups, or:
+in case of a successful lookup, or:
 .(b
 8:NOTFOUND, 
 .)b
@@ -8971,7 +8860,7 @@ in case the key was not found, or:
 55:TEMP this text explains that we had a temporary failure,
 .)b

-in case of a temporary map lookup failure.
+in case of a failure.

 The socket map uses the same syntax as milters
 (see Section "X \*- Mail Filter (Milter) Definitions")
@@ -9065,10 +8954,6 @@ For LDAP maps this is an LDAP filter string
 in which %s is replaced with the literal contents of the lookup key
 and %0 is replaced with the LDAP escaped contents of the lookup key
 according to RFC 2254.
-If the flag
-.b \-K
-is used, then %1 through %9 are replaced with the LDAP escaped contents
-of the arguments specified in the map lookup.
 .ip "\-v\fIvalcol\fP"
 The value column name (for NIS+) or number
 (for text lookups).
@@ -9093,8 +8978,6 @@ to combine multiple values
 into a single return string.
 If not set,
 the LDAP lookup will only return the first match found.
-For DNS maps this is the separator character at which
-the result of a query is cut off if is too long.
 .ip "\-t"
 Normally, when a map attempts to do a lookup
 and the server fails
@@ -9160,10 +9043,6 @@ delay: specify the resolver's retransmission time interval (in seconds).
 .ip "\-r"
 retry: specify the number of times to retransmit a resolver query.
 .pp
-The dns map has another flag:
-.ip "\-B"
-basedomain: specify a domain that is always appended to queries.
-.pp
 The following additional flags are present in the ldap map only:
 .ip "\-R"
 Do not auto chase referrals.  sendmail must be compiled with
@@ -9200,7 +9079,7 @@ For example,
 .)b
 is equivalent to
 .(b
-H ldap://server.example.com:389 -b dc=example,dc=com
+-H ldap://server.example.com:389/dc=example,dc=com
 .)b
 If the LDAP library supports it,
 the LDAP URI format however can also request LDAP over SSL by using
@@ -9209,20 +9088,20 @@ instead of
 .b ldap:// .
 For example:
 .(b
-O LDAPDefaultSpec=-H ldaps://ldap.example.com -b dc=example,dc=com
+O LDAPDefaultSpec=-H ldaps://ldap.example.com/dc=example,dc=com
 .)b
 Similarly, if the LDAP library supports it,
 It can also be used to specify a UNIX domain socket using
 .b ldapi:// :
 .(b
-O LDAPDefaultSpec=-H ldapi://socketfile -b dc=example,dc=com
+O LDAPDefaultSpec=-H ldapi://socketfile/dc=example,dc=com
 .)b
 .ip "\-b\fIbase\fP"
 LDAP search base.
 .ip "\-l\fItimelimit\fP"
 Time limit for LDAP queries.
 .ip "\-Z\fIsizelimit\fP"
-Size (number of matches) limit for LDAP or DNS queries.
+Size (number of matches) limit for LDAP queries.
 .ip "\-d\fIdistinguished_name\fP"
 The distinguished name to use to login to the LDAP server.
 .ip "\-M\fImethod\fP"
@@ -9250,10 +9129,6 @@ For example,
 will cause
 .i sendmail
 to use LDAPv3 when communicating with the LDAP server.
-.ip "\-K"
-Treat the LDAP search key as multi-argument and
-replace %1 through %9 in the key with
-the LDAP escaped contents of the lookup arguments specified in the map lookup.
 .pp
 The
 .i dbm
@@ -11435,7 +11310,7 @@ replace it with a blank sheet for double-sided output.
 .\".sz 10
 .\"Eric Allman
 .\".sp
-.\"Version $Revision: 8.741 $
+.\"Version $Revision: 8.699 $
 .\".ce 0
 .bp 3
 .ce
@@ -1,8 +1,7 @@
-dnl $Id: Makefile.m4,v 1.6 2006/06/28 21:08:01 ca Exp $
+dnl $Id: Makefile.m4,v 1.5 2002/06/21 22:01:30 ca Exp $
 include(confBUILDTOOLSDIR`/M4/switch.m4')

 define(`confREQUIRE_LIBSM', `true')
-define(`confREQUIRE_SM_OS_H', `true')
 # sendmail dir
 SMSRCDIR=	ifdef(`confSMSRCDIR', `confSMSRCDIR', `${SRCDIR}/sendmail')
 PREPENDDEF(`confENVDEF', `confMAPDEF')
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 1998-2002, 2004 Sendmail, Inc. and its suppliers.
+ * Copyright (c) 1998-2002 Sendmail, Inc. and its suppliers.
 *	All rights reserved.
 * Copyright (c) 1992 Eric P. Allman.  All rights reserved.
 * Copyright (c) 1992, 1993
@@ -22,7 +22,7 @@ SM_UNUSED(static char copyright[]) =
 #endif /* ! lint */

 #ifndef lint
-SM_UNUSED(static char id[]) = "@(#)$Id: editmap.c,v 1.25 2007/05/11 18:50:35 ca Exp $";
+SM_UNUSED(static char id[]) = "@(#)$Id: editmap.c,v 1.23 2002/03/28 17:49:33 gshapiro Exp $";
 #endif /* ! lint */


@@ -46,7 +46,7 @@ uid_t	RealUid;
 gid_t	RealGid;
 char	*RealUserName;
 uid_t	RunAsUid;
-gid_t	RunAsGid;
+uid_t	RunAsGid;
 char	*RunAsUserName;
 int	Verbose = 2;
 bool	DontInitGroups = false;
@@ -57,8 +57,6 @@ BITMAP256 DontBlameSendmail;
 #define ISSEP(c) (isascii(c) && isspace(c))


-static void usage __P((char *));
-
 static void
 usage(progname)
 	char *progname;
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 1999-2004, 2006 Sendmail, Inc. and its suppliers.
+ * Copyright (c) 1999-2004 Sendmail, Inc. and its suppliers.
 *	All rights reserved.
 *
 * By using this file, you agree to the terms and conditions set
@@ -7,7 +7,7 @@
 * the sendmail distribution.
 *
 *
- *	$Id: mfapi.h,v 8.77 2006/11/02 02:44:07 ca Exp $
+ *	$Id: mfapi.h,v 8.59 2004/07/07 21:41:31 ca Exp $
 */

 /*
@@ -18,13 +18,9 @@
 # define _LIBMILTER_MFAPI_H	1

 #ifndef SMFI_VERSION
-# define SMFI_VERSION	0x01000000	/* libmilter version number */
+# define SMFI_VERSION	2		/* version number */
 #endif /* ! SMFI_VERSION */

-#define SM_LM_VRS_MAJOR(v)	(((v) & 0x7f000000) >> 24)
-#define SM_LM_VRS_MINOR(v)	(((v) & 0x007fff00) >> 8)
-#define SM_LM_VRS_PLVL(v)	((v) & 0x0000007f)
-
 # include <sys/types.h>
 # include <sys/socket.h>

@@ -44,14 +40,11 @@ extern "C" {

 /*
 **  libmilter functions return one of the following to indicate
-**  success/failure(/continue):
+**  success/failure:
 */

 #define MI_SUCCESS	0
 #define MI_FAILURE	(-1)
-#if _FFR_WORKERS_POOL
-# define MI_CONTINUE	1
-#endif /* _FFR_WORKERS_POOL */

 /* "forward" declarations */
 typedef struct smfi_str SMFICTX;
@@ -135,24 +128,15 @@ struct smfiDesc
 	/* connection cleanup */
 	sfsistat	(*xxfi_close) SM__P((SMFICTX *));

+#if SMFI_VERSION > 2
 	/* any unrecognized or unimplemented command filter */
-	sfsistat	(*xxfi_unknown) SM__P((SMFICTX *, const char *));
+	sfsistat	(*xxfi_unknown) SM__P((SMFICTX *, char *));
+#endif /* SMFI_VERSION > 2 */

-	/* SMTP DATA command filter */
+#if SMFI_VERSION > 3
+	/* any unrecognized or unimplemented command filter */
 	sfsistat	(*xxfi_data) SM__P((SMFICTX *));
-
-	/* negotiation callback */
-	sfsistat	(*xxfi_negotiate) SM__P((SMFICTX *,
-					unsigned long, unsigned long,
-					unsigned long, unsigned long,
-					unsigned long *, unsigned long *,
-					unsigned long *, unsigned long *));
-
-#if 0
-	/* signal handler callback, not yet implemented. */
-	int		(*xxfi_signal) SM__P((int));
-#endif
-
+#endif /* SMFI_VERSION > 3 */
 };

 LIBMILTER_API int smfi_opensocket __P((bool));
@@ -166,7 +150,6 @@ LIBMILTER_API int smfi_stop __P((void));
 #if _FFR_MAXDATASIZE
 LIBMILTER_API size_t smfi_setmaxdatasize __P((size_t));
 #endif /* _FFR_MAXDATASIZE */
-LIBMILTER_API int smfi_version __P((unsigned int *, unsigned int *, unsigned int *));

 /*
 **  What the filter might do -- values to be ORed together for
@@ -182,33 +165,6 @@ LIBMILTER_API int smfi_version __P((unsigned int *, unsigned int *, unsigned int
 #define SMFIF_CHGHDRS	0x00000010L	/* filter may change/delete headers */
 #define SMFIF_QUARANTINE 0x00000020L	/* filter may quarantine envelope */

-/* filter may change "from" (envelope sender) */
-#define SMFIF_CHGFROM	0x00000040L
-#define SMFIF_ADDRCPT_PAR	0x00000080L	/* add recipients incl. args */
-
-/* filter can send set of symbols (macros) that it wants */
-#define SMFIF_SETSYMLIST	0x00000100L
-
-
-/*
-**  Macro "places";
-**  Notes:
-**  - must be coordinated with libmilter/engine.c and sendmail/milter.c
-**  - the order MUST NOT be changed as it would break compatibility between
-**	different versions. It's ok to append new entries however
-**	(hence the list is not sorted by the SMT protocol steps).
-*/
-
-#define SMFIM_FIRST	0	/* Do NOT use, internal marker only */
-#define SMFIM_CONNECT	0	/* connect */
-#define SMFIM_HELO	1	/* HELO/EHLO */
-#define SMFIM_ENVFROM	2	/* MAIL From */
-#define SMFIM_ENVRCPT	3	/* RCPT To */
-#define SMFIM_DATA	4	/* DATA */
-#define SMFIM_EOM	5	/* end of message (final dot) */
-#define SMFIM_EOH	6	/* end of header */
-#define SMFIM_LAST	6	/* Do NOT use, internal marker only */
-
 /*
 **  Continue processing message/connection.
 */
@@ -253,21 +209,6 @@ LIBMILTER_API int smfi_version __P((unsigned int *, unsigned int *, unsigned int

 #define SMFIS_TEMPFAIL	4

-/*
-**  Do not send a reply to the MTA
-*/
-
-#define SMFIS_NOREPLY	7
-
-/*
-**  Skip over rest of same callbacks, e.g., body.
-*/
-
-#define SMFIS_SKIP	8
-
-/* xxfi_negotiate: use all existing protocol options/actions */
-#define SMFIS_ALL_OPTS	10
-
 #if 0
 /*
 **  Filter Routine Details
@@ -320,12 +261,12 @@ extern sfsistat	xxfi_envrcpt __P((SMFICTX *, char **));

 /* unknown command filter */

-extern sfsistat	*xxfi_unknown __P((SMFICTX *, const char *));
+extern sfsistat	*xxfi_unknown __P((SMFICTX *, char *));

 /*
 **  xxfi_unknown(ctx, arg) Invoked when SMTP command is not recognized or not
 **  implemented.
-**	const char *arg; Null-terminated SMTP command
+**	char *arg; Null-terminated SMTP command
 */

 /* header filter */
@@ -473,17 +414,6 @@ LIBMILTER_API int smfi_insheader __P((SMFICTX *, int, char *, char *));
 **	char *headerv; Header field value
 */

-LIBMILTER_API int smfi_chgfrom __P((SMFICTX *, char *, char *));
-
-/*
-**  Modify envelope sender address
-**
-**	SMFICTX *ctx; Opaque context structure
-**	char *mail; New envelope sender address
-**	char *args; ESMTP arguments
-*/
-
-
 LIBMILTER_API int smfi_addrcpt __P((SMFICTX *, char *));

 /*
@@ -493,19 +423,9 @@ LIBMILTER_API int smfi_addrcpt __P((SMFICTX *, char *));
 **	char *rcpt; Recipient to be added
 */

-LIBMILTER_API int smfi_addrcpt_par __P((SMFICTX *, char *, char *));
-
-/*
-**  Add a recipient to the envelope
-**
-**	SMFICTX *ctx; Opaque context structure
-**	char *rcpt; Recipient to be added
-**	char *args; ESMTP arguments
-*/
-
-
 LIBMILTER_API int smfi_delrcpt __P((SMFICTX *, char *));

+#if _FFR_SMFI_PROGRESS
 /*
 **  Send a "no-op" up to the MTA to tell it we're still alive, so long
 **  milter-side operations don't time out.
@@ -514,6 +434,7 @@ LIBMILTER_API int smfi_delrcpt __P((SMFICTX *, char *));
 */

 LIBMILTER_API int smfi_progress __P((SMFICTX *));
+#endif /* _FFR_SMFI_PROGRESS */

 /*
 **  Delete a recipient from the envelope
@@ -567,27 +488,6 @@ LIBMILTER_API int smfi_setpriv __P((SMFICTX *, void *));

 LIBMILTER_API void *smfi_getpriv __P((SMFICTX *));

-/*
-**  Get the private data pointer
-**
-**	SMFICTX *ctx; Opaque context structure
-**	void *privatedata; Pointer to private data area
-*/
-
-LIBMILTER_API int smfi_setsymlist __P((SMFICTX *, int, char *));
-
-/*
-**  Set list of symbols (macros) to receive
-**
-**	SMFICTX *ctx; Opaque context structure
-**	int where; where in the SMTP dialogue should the macros be sent
-**	char *macros; list of macros (space separated)
-*/
-
-#if _FFR_THREAD_MONITOR
-LIBMILTER_API int smfi_set_max_exec_time __P((unsigned int));
-#endif /* _FFR_THREAD_MONITOR */
-
 #ifdef __cplusplus
 }
 #endif /* __cplusplus */
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 1999-2007 Sendmail, Inc. and its suppliers.
+ * Copyright (c) 1999-2004 Sendmail, Inc. and its suppliers.
 *	All rights reserved.
 *
 * By using this file, you agree to the terms and conditions set
@@ -7,7 +7,7 @@
 * the sendmail distribution.
 *
 *
- *	$Id: mfdef.h,v 8.38 2007/03/27 18:53:48 ca Exp $
+ *	$Id: mfdef.h,v 8.21 2004/07/07 21:41:31 ca Exp $
 */

 /*
@@ -17,94 +17,78 @@
 #ifndef _LIBMILTER_MFDEF_H
 # define _LIBMILTER_MFDEF_H	1

-#ifndef SMFI_PROT_VERSION
-# define SMFI_PROT_VERSION	6	/* MTA - libmilter protocol version */
-#endif /* SMFI_PROT_VERSION */
-
 /* Shared protocol constants */
-#define MILTER_LEN_BYTES	4	/* length of 32 bit integer in bytes */
-#define MILTER_OPTLEN	(MILTER_LEN_BYTES * 3) /* length of options */
-#define MILTER_CHUNK_SIZE	65535	/* body chunk size */
-#define MILTER_MAX_DATA_SIZE	65535	/* default milter command data limit */
+# define MILTER_LEN_BYTES	4	/* length of 32 bit integer in bytes */
+# define MILTER_OPTLEN	(MILTER_LEN_BYTES * 3) /* length of options */
+# define MILTER_CHUNK_SIZE	65535	/* body chunk size */
+# define MILTER_MAX_DATA_SIZE	65535	/* default milter command data limit */

 /* These apply to SMFIF_* flags */
 #define SMFI_V1_ACTS	0x0000000FL	/* The actions of V1 filter */
 #define SMFI_V2_ACTS	0x0000003FL	/* The actions of V2 filter */
-#define SMFI_CURR_ACTS	0x000001FFL	/* actions of current version */
+#define SMFI_CURR_ACTS	SMFI_V2_ACTS	/* The current version */

 /* address families */
-#define SMFIA_UNKNOWN		'U'	/* unknown */
-#define SMFIA_UNIX		'L'	/* unix/local */
-#define SMFIA_INET		'4'	/* inet */
-#define SMFIA_INET6		'6'	/* inet6 */
+# define SMFIA_UNKNOWN		'U'	/* unknown */
+# define SMFIA_UNIX		'L'	/* unix/local */
+# define SMFIA_INET		'4'	/* inet */
+# define SMFIA_INET6		'6'	/* inet6 */

 /* commands: don't use anything smaller than ' ' */
-#define SMFIC_ABORT		'A'	/* Abort */
-#define SMFIC_BODY		'B'	/* Body chunk */
-#define SMFIC_CONNECT		'C'	/* Connection information */
-#define SMFIC_MACRO		'D'	/* Define macro */
-#define SMFIC_BODYEOB		'E'	/* final body chunk (End) */
-#define SMFIC_HELO		'H'	/* HELO/EHLO */
-#define SMFIC_QUIT_NC		'K'	/* QUIT but new connection follows */
-#define SMFIC_HEADER		'L'	/* Header */
-#define SMFIC_MAIL		'M'	/* MAIL from */
-#define SMFIC_EOH		'N'	/* EOH */
-#define SMFIC_OPTNEG		'O'	/* Option negotiation */
-#define SMFIC_QUIT		'Q'	/* QUIT */
-#define SMFIC_RCPT		'R'	/* RCPT to */
-#define SMFIC_DATA		'T'	/* DATA */
-#define SMFIC_UNKNOWN		'U'	/* Any unknown command */
+# define SMFIC_ABORT		'A'	/* Abort */
+# define SMFIC_BODY		'B'	/* Body chunk */
+# define SMFIC_CONNECT		'C'	/* Connection information */
+# define SMFIC_MACRO		'D'	/* Define macro */
+# define SMFIC_BODYEOB		'E'	/* final body chunk (End) */
+# define SMFIC_HELO		'H'	/* HELO/EHLO */
+# define SMFIC_HEADER		'L'	/* Header */
+# define SMFIC_MAIL		'M'	/* MAIL from */
+# define SMFIC_EOH		'N'	/* EOH */
+# define SMFIC_OPTNEG		'O'	/* Option negotiation */
+# define SMFIC_QUIT		'Q'	/* QUIT */
+# define SMFIC_RCPT		'R'	/* RCPT to */
+# if SMFI_VERSION > 3
+#  define SMFIC_DATA		'T'	/* DATA */
+# endif /* SMFI_VERSION > 3 */
+# if SMFI_VERSION > 2
+#  define SMFIC_UNKNOWN		'U'	/* Any unknown command */
+# endif /* SMFI_VERSION > 2 */

 /* actions (replies) */
-#define SMFIR_ADDRCPT		'+'	/* add recipient */
-#define SMFIR_DELRCPT		'-'	/* remove recipient */
-#define SMFIR_ADDRCPT_PAR	'2'	/* add recipient (incl. ESMTP args) */
-#define SMFIR_SHUTDOWN		'4'	/* 421: shutdown (internal to MTA) */
-#define SMFIR_ACCEPT		'a'	/* accept */
-#define SMFIR_REPLBODY		'b'	/* replace body (chunk) */
-#define SMFIR_CONTINUE		'c'	/* continue */
-#define SMFIR_DISCARD		'd'	/* discard */
-#define SMFIR_CHGFROM		'e'	/* change envelope sender (from) */
-#define SMFIR_CONN_FAIL		'f'	/* cause a connection failure */
-#define SMFIR_ADDHEADER		'h'	/* add header */
-#define SMFIR_INSHEADER		'i'	/* insert header */
-#define SMFIR_SETSYMLIST	'l'	/* set list of symbols (macros) */
-#define SMFIR_CHGHEADER		'm'	/* change header */
-#define SMFIR_PROGRESS		'p'	/* progress */
-#define SMFIR_QUARANTINE	'q'	/* quarantine */
-#define SMFIR_REJECT		'r'	/* reject */
-#define SMFIR_SKIP		's'	/* skip */
-#define SMFIR_TEMPFAIL		't'	/* tempfail */
-#define SMFIR_REPLYCODE		'y'	/* reply code etc */
+# define SMFIR_ADDRCPT		'+'	/* add recipient */
+# define SMFIR_DELRCPT		'-'	/* remove recipient */
+# define SMFIR_ACCEPT		'a'	/* accept */
+# define SMFIR_REPLBODY		'b'	/* replace body (chunk) */
+# define SMFIR_CONTINUE		'c'	/* continue */
+# define SMFIR_DISCARD		'd'	/* discard */
+# define SMFIR_CHGHEADER	'm'	/* change header */
+# define SMFIR_PROGRESS		'p'	/* progress */
+# define SMFIR_REJECT		'r'	/* reject */
+# define SMFIR_TEMPFAIL		't'	/* tempfail */
+# define SMFIR_SHUTDOWN		'4'	/* 421: shutdown (internal to MTA) */
+# define SMFIR_ADDHEADER	'h'	/* add header */
+# define SMFIR_INSHEADER	'i'	/* insert header */
+# define SMFIR_REPLYCODE	'y'	/* reply code etc */
+# define SMFIR_QUARANTINE	'q'	/* quarantine */

 /* What the MTA can send/filter wants in protocol */
-#define SMFIP_NOCONNECT 0x00000001L	/* MTA should not send connect info */
-#define SMFIP_NOHELO	0x00000002L	/* MTA should not send HELO info */
-#define SMFIP_NOMAIL	0x00000004L	/* MTA should not send MAIL info */
-#define SMFIP_NORCPT	0x00000008L	/* MTA should not send RCPT info */
-#define SMFIP_NOBODY	0x00000010L	/* MTA should not send body */
-#define SMFIP_NOHDRS	0x00000020L	/* MTA should not send headers */
-#define SMFIP_NOEOH	0x00000040L	/* MTA should not send EOH */
-#define SMFIP_NR_HDR	0x00000080L	/* No reply for headers */
-#define SMFIP_NOHREPL	SMFIP_NR_HDR	/* No reply for headers */
-#define SMFIP_NOUNKNOWN 0x00000100L /* MTA should not send unknown commands */
-#define SMFIP_NODATA    0x00000200L	/* MTA should not send DATA */
-#define SMFIP_SKIP	0x00000400L	/* MTA understands SMFIS_SKIP */
-#define SMFIP_RCPT_REJ	0x00000800L /* MTA should also send rejected RCPTs */
-#define SMFIP_NR_CONN	0x00001000L	/* No reply for connect */
-#define SMFIP_NR_HELO	0x00002000L	/* No reply for HELO */
-#define SMFIP_NR_MAIL	0x00004000L	/* No reply for MAIL */
-#define SMFIP_NR_RCPT	0x00008000L	/* No reply for RCPT */
-#define SMFIP_NR_DATA	0x00010000L	/* No reply for DATA */
-#define SMFIP_NR_UNKN	0x00020000L	/* No reply for UNKN */
-#define SMFIP_NR_EOH	0x00040000L	/* No reply for eoh */
-#define SMFIP_NR_BODY	0x00080000L	/* No reply for body chunk */
-#define SMFIP_HDR_LEADSPC 0x00100000L	/* header value leading space */
+# define SMFIP_NOCONNECT 0x00000001L	/* MTA should not send connect info */
+# define SMFIP_NOHELO	0x00000002L	/* MTA should not send HELO info */
+# define SMFIP_NOMAIL	0x00000004L	/* MTA should not send MAIL info */
+# define SMFIP_NORCPT	0x00000008L	/* MTA should not send RCPT info */
+# define SMFIP_NOBODY	0x00000010L	/* MTA should not send body */
+# define SMFIP_NOHDRS	0x00000020L	/* MTA should not send headers */
+# define SMFIP_NOEOH	0x00000040L	/* MTA should not send EOH */
+# if _FFR_MILTER_NOHDR_RESP
+#  define SMFIP_NOHREPL  0x00000080L	/* No reply for headers */
+# endif /* _FFR_MILTER_NOHDR_RESP */

-#define SMFI_V1_PROT	0x0000003FL	/* The protocol of V1 filter */
-#define SMFI_V2_PROT	0x0000007FL	/* The protocol of V2 filter */
-
-/* all defined protocol bits */
-#define SMFI_CURR_PROT	0x001FFFFFL
+# define SMFI_V1_PROT	0x0000003FL	/* The protocol of V1 filter */
+# define SMFI_V2_PROT	0x0000007FL	/* The protocol of V2 filter */
+# if _FFR_MILTER_NOHDR_RESP
+#  define SMFI_CURR_PROT 0x000000FFL	/* The current version */
+# else /* _FFR_MILTER_NOHDR_RESP */
+#  define SMFI_CURR_PROT SMFI_V2_PROT	/* The current version */
+# endif /* _FFR_MILTER_NOHDR_RESP */

 #endif /* !_LIBMILTER_MFDEF_H */
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 1999-2003, 2006 Sendmail, Inc. and its suppliers.
+ * Copyright (c) 1999-2003 Sendmail, Inc. and its suppliers.
 *	All rights reserved.
 *
 * By using this file, you agree to the terms and conditions set
@@ -7,7 +7,7 @@
 * the sendmail distribution.
 *
 *
- *	$Id: milter.h,v 8.41 2006/05/22 23:23:55 ca Exp $
+ *	$Id: milter.h,v 8.39 2003/12/02 00:21:42 msk Exp $
 */

 /*
@@ -25,4 +25,31 @@
 typedef pthread_t	sthread_t;
 typedef int		socket_t;

+# define MAX_MACROS_ENTRIES	5	/* max size of macro pointer array */
+
+/*
+**  context for milter
+**  implementation hint:
+**  macros are stored in mac_buf[] as sequence of:
+**  macro_name \0 macro_value
+**  (just as read from the MTA)
+**  mac_ptr is a list of pointers into mac_buf to the beginning of each
+**  entry, i.e., macro_name, macro_value, ...
+*/
+
+struct smfi_str
+{
+	sthread_t	ctx_id;		/* thread id */
+	socket_t	ctx_sd;		/* socket descriptor */
+	int		ctx_dbg;	/* debug level */
+	time_t		ctx_timeout;	/* timeout */
+	int		ctx_state;	/* state */
+	smfiDesc_ptr	ctx_smfi;	/* filter description */
+	unsigned long	ctx_pflags;	/* protocol flags */
+	char		**ctx_mac_ptr[MAX_MACROS_ENTRIES];
+	char		*ctx_mac_buf[MAX_MACROS_ENTRIES];
+	char		*ctx_reply;	/* reply code */
+	void		*ctx_privdata;	/* private data */
+};
+
 #endif /* ! _LIBMILTER_MILTER_H */
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 1998-2001, 2004 Sendmail, Inc. and its suppliers.
+ * Copyright (c) 1998-2001 Sendmail, Inc. and its suppliers.
 *	All rights reserved.
 * Copyright (c) 1983, 1995-1997 Eric P. Allman.  All rights reserved.
 * Copyright (c) 1988, 1993
@@ -9,7 +9,7 @@
 * forth in the LICENSE file which can be found at the top level of
 * the sendmail distribution.
 *
- *	$Id: clock.h,v 1.12 2004/08/03 19:57:21 ca Exp $
+ *	$Id: clock.h,v 1.11 2001/05/14 23:25:37 gshapiro Exp $
 */

 /*
@@ -52,8 +52,9 @@ typedef struct sm_event	SM_EVENT;
 /* functions */
 extern void	sm_clrevent __P((SM_EVENT *));
 extern void	sm_clear_events __P((void));
-extern SM_EVENT	*sm_seteventm __P((int, void(*)__P((int)), int));
-extern SM_EVENT	*sm_sigsafe_seteventm __P((int, void(*)__P((int)), int));
+extern SM_EVENT	*sm_setevent __P((time_t, void(*)(), int));
+extern SM_EVENT	*sm_seteventm __P((int, void(*)(), int));
+extern SM_EVENT	*sm_sigsafe_seteventm __P((int, void(*)(), int));
 extern SIGFUNC_DECL	sm_tick __P((int));

 /*
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 1998-2007 Sendmail, Inc. and its suppliers.
+ * Copyright (c) 1998-2004 Sendmail, Inc. and its suppliers.
 *	All rights reserved.
 * Copyright (c) 1983, 1995-1997 Eric P. Allman.  All rights reserved.
 * Copyright (c) 1988, 1993
@@ -10,16 +10,14 @@
 * the sendmail distribution.
 *
 *
- *	$Id: conf.h,v 1.134 2007/09/24 23:05:37 ca Exp $
+ *	$Id: conf.h,v 1.116 2004/07/26 18:08:35 ca Exp $
 */

 /*
 **  CONF.H -- All user-configurable parameters for sendmail
 **
-**	Send updates to Sendmail.ORG so they will be
-**	included in the next release; see
-**	http://www.sendmail.org/email-addresses.html
-**	for current e-mail address.
+**	Send updates to sendmail@Sendmail.ORG so they will be
+**	included in the next release.
 */

 #ifndef SM_CONF_H
@@ -162,11 +160,7 @@ extern void	hard_syslog();
 */

 # ifdef _AIX5
-#  include <sys/signal.h>
-#  include <sys/wait.h>
 #  define _AIX4		40300
-#  define SOCKADDR_LEN_T socklen_t /* e.g., arg#3 to accept, getsockname */
-#  define SOCKOPT_LEN_T	socklen_t /* arg#5 to getsockopt */
 #  if _AIX5 >= 50200
 #   define HASUNSETENV	1	/* has unsetenv(3) call */
 #  endif /* _AIX5 >= 50200 */
@@ -181,14 +175,10 @@ extern void	hard_syslog();
 #  define BSD4_4_SOCKADDR	/* has sa_len */
 #  define USESETEUID	1	/* seteuid(2) works */
 #  define TZ_TYPE	TZ_NAME	/* use tzname[] vector */
-#  ifndef SOCKOPT_LEN_T
-#   define SOCKOPT_LEN_T	size_t	/* arg#5 to getsockopt */
-#  endif /* SOCKOPT_LEN_T */
+#  define SOCKOPT_LEN_T	size_t	/* arg#5 to getsockopt */
 #  if _AIX4 >= 40200
 #   define HASSETREUID	1	/* setreuid(2) works as of AIX 4.2 */
-#   ifndef SOCKADDR_LEN_T
-#    define SOCKADDR_LEN_T	size_t	/* e.g., arg#3 to accept, getsockname */
-#   endif /* SOCKADDR_LEN_T */
+#   define SOCKADDR_LEN_T	size_t	/* e.g., arg#3 to accept, getsockname */
 #  endif /* _AIX4 >= 40200 */
 #  if defined(_ILS_MACROS)	/* IBM versions aren't side-effect clean */
 #   undef isascii
@@ -218,9 +208,7 @@ extern void	hard_syslog();
 #  define GIDSET_T	gid_t
 #  define SFS_TYPE	SFS_STATFS	/* use <sys/statfs.h> statfs() impl */
 #  define SPT_PADCHAR	'\0'	/* pad process title with nulls */
-#  ifndef LA_TYPE
-#   define LA_TYPE	LA_INT
-#  endif /* LA_TYPE */
+#  define LA_TYPE	LA_INT
 #  define FSHIFT	16
 #  define LA_AVENRUN	"avenrun"
 #  if !defined(_AIX4) || _AIX4 < 40300
@@ -410,9 +398,6 @@ typedef int		pid_t;
 #   if SOLARIS >= 20500 || (SOLARIS < 10000 && SOLARIS >= 205)
 #    define HASSETREUID	1		/* setreuid works as of 2.5 */
 #    define HASSETREGID	1	/* use setregid(2) to set saved gid */
-#   if SOLARIS >= 20600 || (SOLARIS < 10000 && SOLARIS >= 206)
-#    define HASSNPRINTF 1	/* has snprintf(3c) starting in 2.6 */
-#   endif /* SOLARIS >= 20600 || (SOLARIS < 10000 && SOLARIS >= 206) */
 #    if SOLARIS < 207 || (SOLARIS > 10000 && SOLARIS < 20700)
 #     ifndef LA_TYPE
 #      define LA_TYPE	LA_KSTAT	/* use kstat(3k) -- may work in < 2.5 */
@@ -448,7 +433,6 @@ typedef int		pid_t;
 #     define SMRSH_CMDDIR	"/var/adm/sm.bin"
 #    endif /* ! SMRSH_CMDDIR */
 #    define SL_FUDGE	34	/* fudge offset for SyslogPrefixLen */
-#    define HASLDAPGETALIASBYNAME	1	/* added in S8 */
 #   endif /* SOLARIS >= 20800 || (SOLARIS < 10000 && SOLARIS >= 208) */
 #   if SOLARIS >= 20900 || (SOLARIS < 10000 && SOLARIS >= 209)
 #    define HASURANDOMDEV	1	/* /dev/[u]random added in S9 */
@@ -458,9 +442,6 @@ typedef int		pid_t;
 #   if SOLARIS >= 21000 || (SOLARIS < 10000 && SOLARIS >= 210)
 #    define HASUNSETENV 1       /* unsetenv() added in S10 */
 #   endif /* SOLARIS >= 21000 || (SOLARIS < 10000 && SOLARIS >= 210) */
-#   if SOLARIS >= 21100 || (SOLARIS < 10000 && SOLARIS >= 211)
-#    define GETLDAPALIASBYNAME_VERSION 2	/* changed in S11 */
-#   endif /* SOLARIS >= 21100 || (SOLARIS < 10000 && SOLARIS >= 211) */
 #   ifndef HASGETUSERSHELL
 #    define HASGETUSERSHELL 0	/* getusershell(3) causes core dumps pre-2.7 */
 #   endif /* ! HASGETUSERSHELL */
@@ -745,8 +726,8 @@ typedef int		pid_t;
 #  define HASFLOCK		1	/* has flock(2) */
 #  define HASUNAME		1	/* has uname(2) */
 #  define HASUNSETENV		1	/* has unsetenv(3) */
-#  define HASSETSID		1	/* has POSIX setsid(2) call */
-#  define HASINITGROUPS		1	/* has initgroups(3) */
+#  define HASSETSID	1	/* has POSIX setsid(2) call */
+#  define HASINITGROUPS	1	/* has initgroups(3) */
 #  define HASSETVBUF		1	/* has setvbuf (3) */
 #  define HASSETREUID		0	/* setreuid(2) unusable */
 #  define HASSETEUID		1	/* has seteuid(2) */
@@ -759,22 +740,13 @@ typedef int		pid_t;
 #  define HASWAITPID		1	/* has waitpid(2) */
 #  define HASGETDTABLESIZE	1	/* has getdtablesize(2) */
 #  define HAS_ST_GEN		1	/* has st_gen field in struct stat */
-#  define HASURANDOMDEV		1	/* has urandom(4) */
+#  define HASURANDOMDEV	1	/* has urandom(4) */
 #  define HASSTRERROR		1	/* has strerror(3) */
 #  define HASGETUSERSHELL	1	/* had getusershell(3) */
 #  define GIDSET_T		gid_t	/* getgroups(2) takes gid_t */
 #  define LA_TYPE		LA_SUBR	/* use getloadavg(3) */
 #  define SFS_TYPE		SFS_MOUNT	/* use <sys/mount.h> statfs() impl */
-#  if DARWIN >= 70000
-#   define SOCKADDR_LEN_T	socklen_t
-#  endif
-#  if DARWIN >= 80000
-#   define SPT_TYPE		SPT_REUSEARGV
-#   define SPT_PADCHAR		'\0'
-#   define SOCKOPT_LEN_T	socklen_t
-#  else
-#   define SPT_TYPE		SPT_PSSTRINGS	/* use magic PS_STRINGS pointer for setproctitle */
-#  endif
+#  define SPT_TYPE		SPT_PSSTRINGS	/* use magic PS_STRINGS pointer for setproctitle */
 #  define ERRLIST_PREDEFINED		/* don't declare sys_errlist */
 #  define BSD4_4_SOCKADDR		/* struct sockaddr has sa_len */
 #  define SAFENFSPATHCONF	0	/* unverified: pathconf(2) doesn't work on NFS */
@@ -793,7 +765,7 @@ extern unsigned int sleepX __P((unsigned int seconds));
 **	See also BSD defines.
 */

-# if defined(BSD4_4) && !defined(__bsdi__) && !defined(__GNU__) && !defined(DARWIN)
+# if defined(BSD4_4) && !defined(__bsdi__) && !defined(__GNU__)
 #  include <paths.h>
 #  define HASUNSETENV	1	/* has unsetenv(3) call */
 #  define USESETEUID	1	/* has usable seteuid(2) call */
@@ -811,7 +783,7 @@ extern unsigned int sleepX __P((unsigned int seconds));
 #  endif /* ! LA_TYPE */
 #  define SFS_TYPE	SFS_MOUNT	/* use <sys/mount.h> statfs() impl */
 #  define SPT_TYPE	SPT_PSSTRINGS	/* use PS_STRINGS pointer */
-# endif /* defined(BSD4_4) && !defined(__bsdi__) && !defined(__GNU__) && !defined(DARWIN)*/
+# endif /* defined(BSD4_4) && !defined(__bsdi__) && !defined(__GNU__) */


 /*
@@ -860,69 +832,41 @@ extern unsigned int sleepX __P((unsigned int seconds));
 # endif /* __bsdi__ */


-# if defined(__QNX__)
-#  if defined(__QNXNTO__)
-/* QNX 6 */
-#   include <unix.h>
-#   define HASUNSETENV	1	/* has unsetenv(3) call */
-#   define HASINITGROUPS	1	/* has initgroups(3) call */
-#   define HASSETSID	1	/* has POSIX setsid(2) call */
-#   define USESETEUID	1	/* has usable seteuid(2) call */
-#   define HASFCHMOD	1	/* has fchmod(2) syscall */
-#   define HASFCHOWN	1	/* has fchown(2) syscall */
-#   define HASUNAME	1	/* has uname(2) syscall */
-#   define HASSTRERROR	1	/* has strerror(3) */
-#   define BSD4_4_SOCKADDR	/* has sa_len */
-#   define ERRLIST_PREDEFINED	/* don't declare sys_errlist */
-#   define NETLINK	1	/* supports AF_LINK */
-#   define GIDSET_T	gid_t
-#   define QUAD_T	uint64_t
-#   define HASSNPRINTF	1	/* has snprintf(3) (all versions?) */
-#   define HASGETUSERSHELL 0
-
-/*
-**  We have a strrev() that doesn't allocate anything.
-**  Make sure the one here is used.
-*/
-
-#   define strrev strrev_sendmail
-
-#  else /* defined(__QNXNTO__) */
-
 /*
 **  QNX 4.2x
 **	Contributed by Glen McCready <glen@qnx.com>.
 **
-**	Should work with all versions of QNX 4.
+**	Should work with all versions of QNX.
 */

-#   include <unix.h>
-#   include <sys/select.h>
-#   undef NGROUPS_MAX
-#   define HASSETSID	1	/* has POSIX setsid(2) call */
-#   define USESETEUID	1	/* has usable seteuid(2) call */
-#   define HASFCHMOD	1	/* has fchmod(2) syscall */
-#   define HASGETDTABLESIZE 1	/* has getdtablesize(2) call */
-#   define HASSETREUID	1	/* has setreuid(2) call */
-#   define HASSTRERROR	1	/* has strerror(3) */
-#   define HASFLOCK	0
-#   undef HASINITGROUPS		/* has initgroups(3) call */
-#   define SM_CONF_GETOPT	0	/* need a replacement for getopt(3) */
-#   define IP_SRCROUTE	1	/* can check IP source routing */
-#   define TZ_TYPE	TZ_TMNAME	/* use tmname variable */
-#   define GIDSET_T	gid_t
-#   define LA_TYPE	LA_ZERO
-#   define SFS_TYPE	SFS_NONE
-#   define SPT_TYPE	SPT_REUSEARGV
-#   define SPT_PADCHAR	'\0'	/* pad process title with nulls */
-#   define HASGETUSERSHELL 0
-#   define _FILE_H_INCLUDED
-#  endif /* defined(__QNXNTO__) */
+# if defined(__QNX__)
+#  include <unix.h>
+#  include <sys/select.h>
+#  undef NGROUPS_MAX
+#  define HASSETSID	1	/* has POSIX setsid(2) call */
+#  define USESETEUID	1	/* has usable seteuid(2) call */
+#  define HASFCHMOD	1	/* has fchmod(2) syscall */
+#  define HASGETDTABLESIZE 1	/* has getdtablesize(2) call */
+#  define HASSETREUID	1	/* has setreuid(2) call */
+#  define HASSTRERROR	1	/* has strerror(3) */
+#  define HASFLOCK	0
+#  undef HASINITGROUPS		/* has initgroups(3) call */
+#  define SM_CONF_GETOPT	0	/* need a replacement for getopt(3) */
+#  define IP_SRCROUTE	1	/* can check IP source routing */
+#  define TZ_TYPE	TZ_TMNAME	/* use tmname variable */
+#  define GIDSET_T	gid_t
+#  define LA_TYPE	LA_ZERO
+#  define SFS_TYPE	SFS_NONE
+#  define SPT_TYPE	SPT_REUSEARGV
+#  define SPT_PADCHAR	'\0'	/* pad process title with nulls */
+#  define HASGETUSERSHELL 0
+#  define E_PSEUDOBASE	512
+#  define _FILE_H_INCLUDED
 # endif /* defined(__QNX__) */


 /*
-**  DragonFly BSD/ FreeBSD / NetBSD / OpenBSD (all architectures, all versions)
+**  FreeBSD / NetBSD / OpenBSD (all architectures, all versions)
 **
 **  4.3BSD clone, closer to 4.4BSD	for FreeBSD 1.x and NetBSD 0.9x
 **  4.4BSD-Lite based			for FreeBSD 2.x and NetBSD 1.x
@@ -930,7 +874,7 @@ extern unsigned int sleepX __P((unsigned int seconds));
 **	See also BSD defines.
 */

-# if defined(__DragonFly__) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__)
+# if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__)
 #  include <paths.h>
 #  define HASUNSETENV	1	/* has unsetenv(3) call */
 #  define HASSETSID	1	/* has POSIX setsid(2) call */
@@ -947,14 +891,11 @@ extern unsigned int sleepX __P((unsigned int seconds));
 #  define NETLINK	1	/* supports AF_LINK */
 #  define SAFENFSPATHCONF 1	/* pathconf(2) pessimizes on NFS filesystems */
 #  define GIDSET_T	gid_t
-#  define QUAD_T	unsigned long long
-#  define HASSNPRINTF	1	/* has snprintf(3) (all versions?) */
+#  define QUAD_T		unsigned long long
 #  ifndef LA_TYPE
 #   define LA_TYPE	LA_SUBR
 #  endif /* ! LA_TYPE */
-#  if defined(__NetBSD__) && defined(__NetBSD_Version__) && \
-    ((__NetBSD_Version__ >= 200040000 && __NetBSD_Version__ < 200090000) || \
-    (__NetBSD_Version__ >= 299000900))
+#  if defined(__NetBSD__) && defined(__NetBSD_Version__) && __NetBSD_Version__ >= 200040000
 #   undef SFS_TYPE
 #   define SFS_TYPE	SFS_STATVFS
 #  else
@@ -970,9 +911,7 @@ extern unsigned int sleepX __P((unsigned int seconds));
 #  if defined(__NetBSD__) && defined(__NetBSD_Version__) && __NetBSD_Version__ >= 104170000
 #   define HASSETUSERCONTEXT	1	/* BSDI-style login classes */
 #  endif
-#  if defined(__NetBSD__) && defined(__NetBSD_Version__) && \
-    ((__NetBSD_Version__ >= 200060000 && __NetBSD_Version__ < 200090000) || \
-    (__NetBSD_Version__ >= 299000900))
+#  if defined(__NetBSD__) && defined(__NetBSD_Version__) && __NetBSD_Version__ >= 200060000
 #   define HASCLOSEFROM	1	/* closefrom(3) added in 2.0F */
 #  endif
 #  if defined(__NetBSD__)
@@ -980,23 +919,6 @@ extern unsigned int sleepX __P((unsigned int seconds));
 #   include <sys/param.h>
 #   include <sys/sysctl.h>
 #  endif
-#  if defined(__DragonFly__)
-#   define HASSETLOGIN		1	/* has setlogin(2) */
-#   define HASSRANDOMDEV	1	/* has srandomdev(3) */
-#   define HASURANDOMDEV	1	/* has /dev/urandom(4) */
-#   undef SPT_TYPE
-#   include <libutil.h>
-#   define SPT_TYPE		SPT_BUILTIN
-#   define HASSETUSERCONTEXT	1	/* BSDI-style login classes */
-#   ifndef SMRSH_CMDDIR
-#    define SMRSH_CMDDIR	"/usr/libexec/sm.bin"
-#   endif /* ! SMRSH_CMDDIR */
-#   ifndef SMRSH_PATH
-#    define SMRSH_PATH		"/bin:/usr/bin"
-#   endif /* ! SMRSH_PATH */
-#  define USESYSCTL		1	/* use sysctl(3) for getting ncpus */
-#  include <sys/sysctl.h>
-#  endif /* defined(__DragonFly__) */
 #  if defined(__FreeBSD__)
 #   define HASSETLOGIN	1	/* has setlogin(2) */
 #   if __FreeBSD_version >= 227001
@@ -1047,11 +969,8 @@ extern unsigned int sleepX __P((unsigned int seconds));
 #   if OpenBSD >= 200405
 #    define HASCLOSEFROM	1	/* closefrom(3) added in 3.5 */
 #   endif /* OpenBSD >= 200405 */
-#   if OpenBSD >= 200505
-#    undef NETISO	/* iso.h removed in 3.7 */
-#   endif /* OpenBSD >= 200505 */
 #  endif /* defined(__OpenBSD__) */
-# endif /* defined(__DragonFly__) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) */
+# endif /* defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) */


 /*
@@ -1189,7 +1108,7 @@ typedef short		pid_t;
 #   define _SCO_unix_4_2
 #  else /* ! _SCO_unix_4_2 */
 #   define SOCKADDR_LEN_T	size_t	/* e.g., arg#3 to accept, getsockname */
-#   define SOCKOPT_LEN_T	size_t	/* arg#5 to getsockopt */
+#   define SOCKOPT_LEN_T		size_t	/* arg#5 to getsockopt */
 #  endif /* ! _SCO_unix_4_2 */
 # endif /* _SCO_DS >= 1 */

@@ -1883,7 +1802,7 @@ extern struct passwd *	sendmail_mpe_getpwuid __P((uid_t));
 #  define HASWAITPID		1
 #  define HASGETDTABLESIZE	1
 #  define GIDSET_T		gid_t
-#  define SOCKADDR_LEN_T	size_t
+#  define SOCKADDR_LEN_T		size_t
 #  define SOCKOPT_LEN_T		size_t
 #  ifndef _PATH_UNIX
 #   define _PATH_UNIX		"/stand/unix"
@@ -3005,7 +2924,7 @@ struct sm_align
 		long	al_l;
 		void	*al_p;
 		double	al_d;
-		void	(*al_f) __P((void));
+		void	(*al_f)();
 	} al_u;
 };
 #  define SM_ALIGN_SIZE offsetof(struct sm_align, al_u)
@@ -6,7 +6,7 @@
 * forth in the LICENSE file which can be found at the top level of
 * the sendmail distribution.
 *
- *	$Id: config.h,v 1.47 2004/10/26 21:41:07 gshapiro Exp $
+ *	$Id: config.h,v 1.46 2003/12/10 03:19:06 gshapiro Exp $
 */

 /*
@@ -145,7 +145,6 @@

 /* LDAP Checks */
 # if LDAPMAP
-#  include <lber.h>
 #  include <ldap.h>

 /* Does the LDAP library have ldap_memfree()? */
@@ -6,7 +6,7 @@
 * forth in the LICENSE file which can be found at the top level of
 * the sendmail distribution.
 *
- *	$Id: errstring.h,v 1.10 2007/03/21 23:56:19 ca Exp $
+ *	$Id: errstring.h,v 1.9 2003/12/10 03:19:06 gshapiro Exp $
 */

 /*
@@ -16,10 +16,6 @@
 #ifndef SM_ERRSTRING_H
 # define SM_ERRSTRING_H

-#if defined(__QNX__)
-# define E_PSEUDOBASE	512
-#endif /* defined(__QNX__) */
-
 #include <errno.h>
 #if NEEDINTERRNO
 extern int errno;
@@ -1,12 +1,12 @@
 /*
- * Copyright (c) 2000-2001, 2006 Sendmail, Inc. and its suppliers.
+ * Copyright (c) 2000-2001 Sendmail, Inc. and its suppliers.
 *	All rights reserved.
 *
 * By using this file, you agree to the terms and conditions set
 * forth in the LICENSE file which can be found at the top level of
 * the sendmail distribution.
 *
- *	$Id: heap.h,v 1.23 2006/08/15 00:53:46 ca Exp $
+ *	$Id: heap.h,v 1.22 2001/09/04 22:41:55 ca Exp $
 */

 /*
@@ -91,16 +91,6 @@ sm_fcalloc __P((
 # define sm_heap_setgroup(g)	(SmHeapGroup = (g))
 # define sm_heap_newgroup()	(SmHeapGroup = ++SmHeapMaxGroup)

-#define SM_FREE(ptr)			\
-	do				\
-	{				\
-		if ((ptr) != NULL)	\
-		{			\
-			sm_free(ptr);	\
-			(ptr) = NULL;	\
-		}			\
-	} while (0)
-
 extern int SmHeapGroup;
 extern int SmHeapMaxGroup;

@@ -1,12 +1,12 @@
 /*
- * Copyright (c) 2001-2003, 2005-2007 Sendmail, Inc. and its suppliers.
+ * Copyright (c) 2001-2002 Sendmail, Inc. and its suppliers.
 *      All rights reserved.
 *
 * By using this file, you agree to the terms and conditions set
 * forth in the LICENSE file which can be found at the top level of
 * the sendmail distribution.
 *
- *	$Id: ldap.h,v 1.33 2007/10/10 00:06:44 ca Exp $
+ *	$Id: ldap.h,v 1.27 2003/12/20 09:23:47 gshapiro Exp $
 */

 #ifndef	SM_LDAP_H
@@ -17,7 +17,7 @@

 /*
 **  NOTE: These should be changed from LDAPMAP_* to SM_LDAP_*
-**	in the next major release (8.x+1) of sendmail.
+**        in the next major release (8.13) of sendmail.
 */

 # ifndef LDAPMAP_MAX_ATTR
@@ -32,13 +32,6 @@

 # if LDAPMAP

-/* maximum number of arguments in a map lookup, see sendmail.h: MAX_MAP_ARGS */
-#  define SM_LDAP_ARGS		10
-
-/* error codes from sm_ldap_search*() */
-#  define SM_LDAP_ERR		(-1)	/* generic error: ldap_search(3) */
-#  define SM_LDAP_ERR_ARG_MISS	(-2)	/* an argument is missing */
-
 /* Attribute types */
 #  define SM_LDAP_ATTR_NONE		(-1)
 #  define SM_LDAP_ATTR_OBJCLASS	0
@@ -51,7 +44,6 @@
 #  define SM_LDAP_SINGLEMATCH	0x0001
 #  define SM_LDAP_MATCHONLY	0x0002
 #  define SM_LDAP_USE_ALLATTR	0x0004
-#  define SM_LDAP_SINGLEDN	0x0008

 struct sm_ldap_struct
 {
@@ -82,7 +74,6 @@ struct sm_ldap_struct
 	int		ldap_attr_type[LDAPMAP_MAX_ATTR + 1];
 	char		*ldap_attr_needobjclass[LDAPMAP_MAX_ATTR + 1];
 	bool		ldap_attrsonly;
-	bool		ldap_multi_args;

 	/* args for ldap_result */
 	struct timeval	ldap_timeout;
@@ -91,10 +82,6 @@ struct sm_ldap_struct
 	/* ldapmap_lookup options */
 	char		ldap_attrsep;

-# if _FFR_LDAP_NETWORK_TIMEOUT
-	struct timeval	ldap_networktmo;
-# endif /* _FFR_LDAP_NETWORK_TIMEOUT */
-
 	/* Linked list of maps sharing the same LDAP binding */
 	void		*ldap_next;
 };
@@ -103,18 +90,18 @@ typedef struct sm_ldap_struct		SM_LDAP_STRUCT;

 struct sm_ldap_recurse_entry
 {
-	char		*lr_search;
-	int		lr_type;
-	LDAPURLDesc	*lr_ludp;
-	char		**lr_attrs;
-	bool		lr_done;
+	char *lr_search;
+	int lr_type;
+	LDAPURLDesc *lr_ludp;
+	char **lr_attrs;
+	bool lr_done;
 };

 struct sm_ldap_recurse_list
 {
-	int				lrl_size;
-	int				lrl_cnt;
-	struct sm_ldap_recurse_entry	**lrl_data;
+	int lr_size;
+	int lr_cnt;
+	struct sm_ldap_recurse_entry **lr_data;
 };

 typedef struct sm_ldap_recurse_entry	SM_LDAP_RECURSE_ENTRY;
@@ -124,7 +111,6 @@ typedef struct sm_ldap_recurse_list	SM_LDAP_RECURSE_LIST;
 extern void	sm_ldap_clear __P((SM_LDAP_STRUCT *));
 extern bool	sm_ldap_start __P((char *, SM_LDAP_STRUCT *));
 extern int	sm_ldap_search __P((SM_LDAP_STRUCT *, char *));
-extern int	sm_ldap_search_m __P((SM_LDAP_STRUCT *, char **));
 extern int	sm_ldap_results __P((SM_LDAP_STRUCT *, int, int, int,
 				     SM_RPOOL_T *, char **, int *, int *,
 				     SM_LDAP_RECURSE_LIST *));
@@ -1,19 +0,0 @@
-/*
- * Copyright (c) 2006 Sendmail, Inc. and its suppliers.
- *      All rights reserved.
- *
- * By using this file, you agree to the terms and conditions set
- * forth in the LICENSE file which can be found at the top level of
- * the sendmail distribution.
- *
- *	$Id: misc.h,v 1.1 2006/06/28 23:57:59 ca Exp $
- */
-
-#ifndef SM_MISC_H
-# define SM_MISC_H 1
-
-int sm_memstat_open __P((void));
-int sm_memstat_close __P((void));
-int sm_memstat_get __P((char *, long *));
-
-#endif /* ! SM_MISC_H */
@@ -1,33 +0,0 @@
-/*
- * Copyright (c) 2000-2001, 2004 Sendmail, Inc. and its suppliers.
- *	All rights reserved.
- *
- * By using this file, you agree to the terms and conditions set
- * forth in the LICENSE file which can be found at the top level of
- * the sendmail distribution.
- *
- *	$Id: sm_os_dragonfly.h,v 1.1 2004/08/06 03:54:07 gshapiro Exp $
- */
-
-/*
-**  Platform definitions for DragonFly BSD
-*/
-
-#define SM_OS_NAME	"dragonfly"
-
-#define SM_CONF_SYS_CDEFS_H	1
-
-#define MI_SOMAXCONN	-1	/* listen() max backlog for milter */
-
-#ifndef SM_CONF_STRL
-# define SM_CONF_STRL	1
-#endif /* SM_CONF_STRL */
-#ifndef SM_CONF_SHM
-# define SM_CONF_SHM	1
-#endif /* SM_CONF_SHM */
-#ifndef SM_CONF_SEM
-# define SM_CONF_SEM	1
-#endif /* SM_CONF_SEM */
-#ifndef SM_CONF_MSG
-# define SM_CONF_MSG	1
-#endif /* SM_CONF_MSG */
@@ -1,20 +0,0 @@
-/*
- * Copyright (c) 2007 Sendmail, Inc. and its suppliers.
- *	All rights reserved.
- *
- * By using this file, you agree to the terms and conditions set
- * forth in the LICENSE file which can be found at the top level of
- * the sendmail distribution.
- *
- *	$Id: sm_os_qnx.h,v 1.1 2007/03/21 23:56:20 ca Exp $
- */
-
-/*
-**  sm_os_qnx.h -- platform definitions for QNX
-*/
-
-#define SM_CONF_SYS_CDEFS_H	1
-
-#ifndef SM_CONF_SETITIMER
-# define SM_CONF_SETITIMER	0
-#endif /* SM_CONF_SETITIMER */
@@ -1,59 +0,0 @@
-/*
- * Copyright (c) 2000-2001, 2005 Sendmail, Inc. and its suppliers.
- *      All rights reserved.
- *
- * By using this file, you agree to the terms and conditions set
- * forth in the LICENSE file which can be found at the top level of
- * the sendmail distribution.
- *
- *	$Id: sem.h,v 1.9 2005/02/17 22:08:58 ca Exp $
- */
-
-#ifndef SM_SEM_H
-# define SM_SEM_H 1
-
-#include <sm/gen.h>
-
-/* key for semaphores */
-# define SM_SEM_KEY	(41L)
-# define SM_SEM_NO_ID	(-1)
-# define SM_NO_SEM(id)	((id) < 0)
-
-# if SM_CONF_SEM > 0
-#  include <sys/types.h>
-#  include <sys/ipc.h>
-#  include <sys/sem.h>
-
-# if SM_CONF_SEM == 2
-union semun
-{
-	int		val;
-	struct semid_ds	*buf;
-	ushort		*array;
-};
-# endif /* SM_CONF_SEM == 2 */
-
-# ifndef SEM_A
-#  define SEM_A	0200
-# endif /* SEM_A */
-# ifndef SEM_R
-#  define SEM_R	0400
-# endif /* SEM_R */
-
-# define SM_NSEM	1
-
-extern int sm_sem_start __P((key_t, int, int, bool));
-extern int sm_sem_stop __P((int));
-extern int sm_sem_acq __P((int, int, int));
-extern int sm_sem_rel __P((int, int, int));
-extern int sm_sem_get __P((int, int));
-
-# else /* SM_CONF_SEM > 0 */
-#  define sm_sem_start(key, nsem, semflg, owner) 0
-#  define sm_sem_stop(semid)	0
-#  define sm_sem_acq(semid, semnum, timeout)	0
-#  define sm_sem_rel(semid, semnum, timeout)	0
-#  define sm_sem_get(semid, semnum)	0
-# endif /* SM_CONF_SEM > 0 */
-
-#endif /* ! SM_SEM_H */
@@ -1,24 +0,0 @@
-/*
- * Copyright (c) 2006 Sendmail, Inc. and its suppliers.
- *	All rights reserved.
- *
- * By using this file, you agree to the terms and conditions set
- * forth in the LICENSE file which can be found at the top level of
- * the sendmail distribution.
- */
-
-/*
-**  SENDMAIL.H -- MTA-specific definitions for sendmail.
-*/
-
-#ifndef _SM_SENDMAIL_H
-# define _SM_SENDMAIL_H 1
-
-/* "out of band" indicator */
-#define METAQUOTE	((unsigned char)0377)	/* quotes the next octet */
-
-extern int	dequote_internal_chars __P((char *, char *, int));
-extern char	*quote_internal_chars __P((char *, char *, int *));
-extern char	*str2prt __P((char *));
-
-#endif /* ! _SM_SENDMAIL_H */
@@ -1,12 +1,12 @@
 /*
- * Copyright (c) 2000-2003, 2005 Sendmail, Inc. and its suppliers.
+ * Copyright (c) 2000-2003 Sendmail, Inc. and its suppliers.
 *      All rights reserved.
 *
 * By using this file, you agree to the terms and conditions set
 * forth in the LICENSE file which can be found at the top level of
 * the sendmail distribution.
 *
- *	$Id: shm.h,v 1.11 2005/01/13 22:57:04 ca Exp $
+ *	$Id: shm.h,v 1.10 2003/05/17 18:34:54 ca Exp $
 */

 #ifndef SM_SHM_H
@@ -28,7 +28,6 @@

 extern void *sm_shmstart __P((key_t, int , int , int *, bool));
 extern int sm_shmstop __P((void *, int, bool));
-extern int sm_shmsetowner __P((int, uid_t, gid_t, mode_t));


 /* for those braindead systems... (e.g., SunOS 4) */
@@ -1,157 +0,0 @@
-/*	$OpenBSD: queue.h,v 1.30 2005/10/25 06:37:47 otto Exp $	*/
-/*	$NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $	*/
-
-/*
- * Copyright (c) 1991, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)queue.h	8.5 (Berkeley) 8/20/94
- */
-
-#ifndef	SM_TAILQ_H_
-#define	SM_TAILQ_H_
-
-/*
- * $Id: tailq.h,v 1.2 2007/06/29 23:09:57 ca Exp $
- *
- * This file is a modified copy of queue.h from a BSD system:
- * we only need tail queues here.
- * We do not use queue.h directly because there is a conflict with
- * some versions of that file on some OSs.
- *
- * A tail queue is headed by a pair of pointers, one to the head of the
- * list and the other to the tail of the list. The elements are doubly
- * linked so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before or
- * after an existing element, at the head of the list, or at the end of
- * the list. A tail queue may be traversed in either direction.
- */
-
-/*
- * Tail queue definitions.
- */
-#define SM_TAILQ_HEAD(name, type)					\
-struct name {								\
-	struct type *tqh_first;	/* first element */			\
-	struct type **tqh_last;	/* addr of last next element */		\
-}
-
-#define SM_TAILQ_HEAD_INITIALIZER(head)					\
-	{ NULL, &(head).tqh_first }
-
-#define SM_TAILQ_ENTRY(type)						\
-struct {								\
-	struct type *tqe_next;	/* next element */			\
-	struct type **tqe_prev;	/* address of previous next element */	\
-}
-
-/* 
- * tail queue access methods 
- */
-#define	SM_TAILQ_FIRST(head)		((head)->tqh_first)
-#define	SM_TAILQ_END(head)		NULL
-#define	SM_TAILQ_NEXT(elm, field)	((elm)->field.tqe_next)
-#define SM_TAILQ_LAST(head, headname)					\
-	(*(((struct headname *)((head)->tqh_last))->tqh_last))
-/* XXX */
-#define SM_TAILQ_PREV(elm, headname, field)				\
-	(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
-#define	SM_TAILQ_EMPTY(head)						\
-	(SM_TAILQ_FIRST(head) == SM_TAILQ_END(head))
-
-#define SM_TAILQ_FOREACH(var, head, field)				\
-	for((var) = SM_TAILQ_FIRST(head);				\
-	    (var) != SM_TAILQ_END(head);				\
-	    (var) = SM_TAILQ_NEXT(var, field))
-
-#define SM_TAILQ_FOREACH_REVERSE(var, head, headname, field)		\
-	for((var) = SM_TAILQ_LAST(head, headname);			\
-	    (var) != SM_TAILQ_END(head);				\
-	    (var) = SM_TAILQ_PREV(var, headname, field))
-
-/*
- * Tail queue functions.
- */
-#define	SM_TAILQ_INIT(head) do {					\
-	(head)->tqh_first = NULL;					\
-	(head)->tqh_last = &(head)->tqh_first;				\
-} while (0)
-
-#define SM_TAILQ_INSERT_HEAD(head, elm, field) do {			\
-	if (((elm)->field.tqe_next = (head)->tqh_first) != NULL)	\
-		(head)->tqh_first->field.tqe_prev =			\
-		    &(elm)->field.tqe_next;				\
-	else								\
-		(head)->tqh_last = &(elm)->field.tqe_next;		\
-	(head)->tqh_first = (elm);					\
-	(elm)->field.tqe_prev = &(head)->tqh_first;			\
-} while (0)
-
-#define SM_TAILQ_INSERT_TAIL(head, elm, field) do {			\
-	(elm)->field.tqe_next = NULL;					\
-	(elm)->field.tqe_prev = (head)->tqh_last;			\
-	*(head)->tqh_last = (elm);					\
-	(head)->tqh_last = &(elm)->field.tqe_next;			\
-} while (0)
-
-#define SM_TAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
-	if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
-		(elm)->field.tqe_next->field.tqe_prev =			\
-		    &(elm)->field.tqe_next;				\
-	else								\
-		(head)->tqh_last = &(elm)->field.tqe_next;		\
-	(listelm)->field.tqe_next = (elm);				\
-	(elm)->field.tqe_prev = &(listelm)->field.tqe_next;		\
-} while (0)
-
-#define	SM_TAILQ_INSERT_BEFORE(listelm, elm, field) do {		\
-	(elm)->field.tqe_prev = (listelm)->field.tqe_prev;		\
-	(elm)->field.tqe_next = (listelm);				\
-	*(listelm)->field.tqe_prev = (elm);				\
-	(listelm)->field.tqe_prev = &(elm)->field.tqe_next;		\
-} while (0)
-
-#define SM_TAILQ_REMOVE(head, elm, field) do {				\
-	if (((elm)->field.tqe_next) != NULL)				\
-		(elm)->field.tqe_next->field.tqe_prev =			\
-		    (elm)->field.tqe_prev;				\
-	else								\
-		(head)->tqh_last = (elm)->field.tqe_prev;		\
-	*(elm)->field.tqe_prev = (elm)->field.tqe_next;			\
-} while (0)
-
-#define SM_TAILQ_REPLACE(head, elm, elm2, field) do {			\
-	if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL)	\
-		(elm2)->field.tqe_next->field.tqe_prev =		\
-		    &(elm2)->field.tqe_next;				\
-	else								\
-		(head)->tqh_last = &(elm2)->field.tqe_next;		\
-	(elm2)->field.tqe_prev = (elm)->field.tqe_prev;			\
-	*(elm2)->field.tqe_prev = (elm2);				\
-} while (0)
-
-#endif	/* !SM_TAILQ_H_ */
@@ -1,56 +0,0 @@
-/*
- * Copyright (c) 2005 Sendmail, Inc. and its suppliers.
- *	All rights reserved.
- *
- * By using this file, you agree to the terms and conditions set
- * forth in the LICENSE file which can be found at the top level of
- * the sendmail distribution.
- *
- *	$Id: time.h,v 1.1 2005/06/14 23:07:19 ca Exp $
- */
-
-#ifndef SM_TIME_H
-# define SM_TIME_H 1
-
-# include <sm/config.h>
-
-# include <sys/time.h>
-
-/* should be defined in sys/time.h */
-#ifndef timersub
-# define timersub(tvp, uvp, vvp)					\
-	do								\
-	{								\
-		(vvp)->tv_sec = (tvp)->tv_sec - (uvp)->tv_sec;		\
-		(vvp)->tv_usec = (tvp)->tv_usec - (uvp)->tv_usec;	\
-		if ((vvp)->tv_usec < 0)					\
-		{							\
-			(vvp)->tv_sec--;				\
-			(vvp)->tv_usec += 1000000;			\
-		}							\
-	} while (0)
-#endif /* !timersub */
-
-#ifndef timeradd
-# define timeradd(tvp, uvp, vvp)					\
-	do								\
-	{								\
-		(vvp)->tv_sec = (tvp)->tv_sec + (uvp)->tv_sec;		\
-		(vvp)->tv_usec = (tvp)->tv_usec + (uvp)->tv_usec;	\
-		if ((vvp)->tv_usec >= 1000000)				\
-		{							\
-			(vvp)->tv_sec++;				\
-			(vvp)->tv_usec -= 1000000;			\
-		}							\
-	} while (0)
-#endif /* !timeradd */
-
-#ifndef timercmp
-# define timercmp(tvp, uvp, cmp)					\
-	(((tvp)->tv_sec == (uvp)->tv_sec) ?				\
-	    ((tvp)->tv_usec cmp (uvp)->tv_usec) :			\
-	    ((tvp)->tv_sec cmp (uvp)->tv_sec))
-#endif /* !timercmp */
-
-
-#endif /* ! SM_TIME_H */
@@ -1,4 +1,4 @@
-#       $Id: Makefile,v 8.2 2006/05/23 21:55:55 ca Exp $
+#       $Id: Makefile,v 8.1 1999/11/04 00:03:40 ca Exp $

 SHELL= /bin/sh
 BUILD=   ./Build
@@ -6,8 +6,6 @@ OPTIONS= $(CONFIG) $(FLAGS)

 all: FRC
 	$(SHELL) $(BUILD) $(OPTIONS) $@
-check: FRC
-	$(SHELL) $(BUILD) $(OPTIONS) $@
 clean: FRC
 	$(SHELL) $(BUILD) $(OPTIONS) $@
 install: FRC
@@ -1,19 +1,19 @@
-dnl $Id: Makefile.m4,v 8.78 2007/02/05 19:21:29 ca Exp $
+dnl $Id: Makefile.m4,v 8.31 2002/06/21 22:01:31 ca Exp $
 include(confBUILDTOOLSDIR`/M4/switch.m4')

 dnl only required for compilation of EXTRAS
-define(`confREQUIRE_SM_OS_H', `true')
+define(`confREQUIRE_LIBSM', `true')
 define(`confMT', `true')

 # sendmail dir
-SMSRCDIR=ifdef(`confSMSRCDIR', `confSMSRCDIR', `${SRCDIR}/sendmail')
+SMSRCDIR=	ifdef(`confSMSRCDIR', `confSMSRCDIR', `${SRCDIR}/sendmail')
 PREPENDDEF(`confINCDIRS', `-I${SMSRCDIR} ')

 bldPRODUCT_START(`library', `libmilter')
 define(`bldINSTALLABLE', `true')
 define(`LIBMILTER_EXTRAS', `errstring.c strl.c')
 APPENDDEF(`confENVDEF', `-DNOT_SENDMAIL -Dsm_snprintf=snprintf')
-define(`bldSOURCES', `main.c engine.c listener.c worker.c handler.c comm.c smfi.c signal.c sm_gethost.c monitor.c LIBMILTER_EXTRAS ')
+define(`bldSOURCES', `main.c engine.c listener.c handler.c comm.c smfi.c signal.c sm_gethost.c LIBMILTER_EXTRAS ')
 define(`confBEFORE', `LIBMILTER_EXTRAS')
 bldPUSH_INSTALL_TARGET(`install-mfapi')
 bldPRODUCT_END
@@ -12,9 +12,6 @@ issuing the './Build' command in SRCDIR/libmilter .
 Starting with 8.13 sendmail is compiled by default with support for
 the milter API.

-Note: if you want to write a milter in Java, then see
-http://sendmail-jilter.sourceforge.net/
-
 +----------------+
 | SECURITY HINTS |
 +----------------+
@@ -90,10 +87,8 @@ IPv4 socket on port 3333 of localhost.  The current flags (F=) are:

 	R		Reject connection if filter unavailable
 	T		Temporary fail connection if filter unavailable
-	4		Shut down connection if filter unavailable
-			(with a 421 temporary error).

-If none of these is specified, the message is passed through sendmail
+If neither F=R nor F=T is specified, the message is passed through sendmail
 in case of filter errors as if the failing filters were not present.

 Finally, you can override the default timeouts used by sendmail when
@@ -166,7 +161,7 @@ connected via one of these options, the session can be continued through
 the use of standard SMTP commands.

 % sendmail -bs
-220 test.sendmail.com ESMTP Sendmail 8.14.0/8.14.0; Thu, 22 Jun 2006 13:05:23 -0500 (EST)
+220 test.sendmail.com ESMTP Sendmail 8.11.0/8.11.0; Tue, 10 Nov 1970 13:05:23 -0500 (EST)
 HELO localhost
 250 test.sendmail.com Hello testy@localhost, pleased to meet you
 MAIL From:<testy>
@@ -227,8 +222,248 @@ Feedback about problems (and possible fixes) is welcome.
 | SOURCE FOR SAMPLE FILTER |
 +--------------------------+

-Note that the filter example.c may not be thread safe on some operating
+Note that the filter below may not be thread safe on some operating
 systems.  You should check your system man pages for the functions used
 below to verify the functions are thread safe.

-$Revision: 8.42 $, Last updated $Date: 2006/06/29 17:10:16 $
+/* A trivial filter that logs all email to a file. */
+
+#include <sys/types.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sysexits.h>
+#include <unistd.h>
+
+#include "libmilter/mfapi.h"
+
+#ifndef true
+typedef int bool;
+# define false	0
+# define true	1
+#endif /* ! true */
+
+struct mlfiPriv
+{
+	char	*mlfi_fname;
+	FILE	*mlfi_fp;
+};
+
+#define MLFIPRIV	((struct mlfiPriv *) smfi_getpriv(ctx))
+
+extern sfsistat	 mlfi_cleanup(SMFICTX *, bool);
+
+sfsistat
+mlfi_envfrom(ctx, envfrom)
+	SMFICTX *ctx;
+	char **envfrom;
+{
+	struct mlfiPriv *priv;
+	int fd = -1;
+
+	/* allocate some private memory */
+	priv = malloc(sizeof *priv);
+	if (priv == NULL)
+	{
+		/* can't accept this message right now */
+		return SMFIS_TEMPFAIL;
+	}
+	memset(priv, '\0', sizeof *priv);
+
+	/* open a file to store this message */
+	priv->mlfi_fname = strdup("/tmp/msg.XXXXXXXX");
+	if (priv->mlfi_fname == NULL)
+	{
+		free(priv);
+		return SMFIS_TEMPFAIL;
+	}
+	if ((fd = mkstemp(priv->mlfi_fname)) < 0 ||
+	    (priv->mlfi_fp = fdopen(fd, "w+")) == NULL)
+	{
+		if (fd >= 0)
+			(void) close(fd);
+		free(priv->mlfi_fname);
+		free(priv);
+		return SMFIS_TEMPFAIL;
+	}
+
+	/* save the private data */
+	smfi_setpriv(ctx, priv);
+
+	/* continue processing */
+	return SMFIS_CONTINUE;
+}
+
+sfsistat
+mlfi_header(ctx, headerf, headerv)
+	SMFICTX *ctx;
+	char *headerf;
+	char *headerv;
+{
+	/* write the header to the log file */
+	fprintf(MLFIPRIV->mlfi_fp, "%s: %s\r\n", headerf, headerv);
+
+	/* continue processing */
+	return SMFIS_CONTINUE;
+}
+
+sfsistat
+mlfi_eoh(ctx)
+	SMFICTX *ctx;
+{
+	/* output the blank line between the header and the body */
+	fprintf(MLFIPRIV->mlfi_fp, "\r\n");
+
+	/* continue processing */
+	return SMFIS_CONTINUE;
+}
+
+sfsistat
+mlfi_body(ctx, bodyp, bodylen)
+	SMFICTX *ctx;
+	u_char *bodyp;
+	size_t bodylen;
+{
+	/* output body block to log file */
+	if (fwrite(bodyp, bodylen, 1, MLFIPRIV->mlfi_fp) <= 0)
+	{
+		/* write failed */
+		(void) mlfi_cleanup(ctx, false);
+		return SMFIS_TEMPFAIL;
+	}
+
+	/* continue processing */
+	return SMFIS_CONTINUE;
+}
+
+sfsistat
+mlfi_eom(ctx)
+	SMFICTX *ctx;
+{
+	return mlfi_cleanup(ctx, true);
+}
+
+sfsistat
+mlfi_close(ctx)
+	SMFICTX *ctx;
+{
+	return SMFIS_ACCEPT;
+}
+
+sfsistat
+mlfi_abort(ctx)
+	SMFICTX *ctx;
+{
+	return mlfi_cleanup(ctx, false);
+}
+
+sfsistat
+mlfi_cleanup(ctx, ok)
+	SMFICTX *ctx;
+	bool ok;
+{
+	sfsistat rstat = SMFIS_CONTINUE;
+	struct mlfiPriv *priv = MLFIPRIV;
+	char *p;
+	char host[512];
+	char hbuf[1024];
+
+	if (priv == NULL)
+		return rstat;
+
+	/* close the archive file */
+	if (priv->mlfi_fp != NULL && fclose(priv->mlfi_fp) == EOF)
+	{
+		/* failed; we have to wait until later */
+		rstat = SMFIS_TEMPFAIL;
+		(void) unlink(priv->mlfi_fname);
+	}
+	else if (ok)
+	{
+		/* add a header to the message announcing our presence */
+		if (gethostname(host, sizeof host) < 0)
+			snprintf(host, sizeof host, "localhost");
+		p = strrchr(priv->mlfi_fname, '/');
+		if (p == NULL)
+			p = priv->mlfi_fname;
+		else
+			p++;
+		snprintf(hbuf, sizeof hbuf, "%s@%s", p, host);
+		smfi_addheader(ctx, "X-Archived", hbuf);
+	}
+	else
+	{
+		/* message was aborted -- delete the archive file */
+		(void) unlink(priv->mlfi_fname);
+	}
+
+	/* release private memory */
+	free(priv->mlfi_fname);
+	free(priv);
+	smfi_setpriv(ctx, NULL);
+
+	/* return status */
+	return rstat;
+}
+
+struct smfiDesc smfilter =
+{
+	"SampleFilter",	/* filter name */
+	SMFI_VERSION,	/* version code -- do not change */
+	SMFIF_ADDHDRS,	/* flags */
+	NULL,		/* connection info filter */
+	NULL,		/* SMTP HELO command filter */
+	mlfi_envfrom,	/* envelope sender filter */
+	NULL,		/* envelope recipient filter */
+	mlfi_header,	/* header filter */
+	mlfi_eoh,	/* end of header */
+	mlfi_body,	/* body block filter */
+	mlfi_eom,	/* end of message */
+	mlfi_abort,	/* message aborted */
+	mlfi_close	/* connection cleanup */
+};
+
+
+int
+main(argc, argv)
+	int argc;
+	char *argv[];
+{
+	bool setconn = false;
+	int c;
+	const char *args = "p:";
+
+	/* Process command line options */
+	while ((c = getopt(argc, argv, args)) != -1)
+	{
+		switch (c)
+		{
+		  case 'p':
+			if (optarg == NULL || *optarg == '\0')
+			{
+				(void) fprintf(stderr, "Illegal conn: %s\n",
+					       optarg);
+				exit(EX_USAGE);
+			}
+			(void) smfi_setconn(optarg);
+			setconn = true;
+			break;
+
+		}
+	}
+	if (!setconn)
+	{
+		fprintf(stderr, "%s: Missing required -p argument\n", argv[0]);
+		exit(EX_USAGE);
+	}
+	if (smfi_register(smfilter) == MI_FAILURE)
+	{
+		fprintf(stderr, "smfi_register failed\n");
+		exit(EX_UNAVAILABLE);
+	}
+	return smfi_main();
+}
+
+/* eof */
+
+$Revision: 8.40 $, Last updated $Date: 2003/12/11 18:14:34 $
@@ -9,13 +9,12 @@
 */

 #include <sm/gen.h>
-SM_RCSID("@(#)$Id: comm.c,v 8.67 2006/11/02 17:54:44 ca Exp $")
+SM_RCSID("@(#)$Id: comm.c,v 8.65 2004/07/07 21:41:30 ca Exp $")

 #include "libmilter.h"
 #include <sm/errstring.h>
 #include <sys/uio.h>

-static ssize_t	retry_writev __P((socket_t, struct iovec *, int, struct timeval *));
 static size_t Maxdatasize = MILTER_MAX_DATA_SIZE;

 #if _FFR_MAXDATASIZE
@@ -352,7 +351,7 @@ mi_wr_cmd(sd, timeout, cmd, buf, len)
 		iov[1].iov_len  = len;
 		iovcnt = 2;
 	}
-
+    
 	l = retry_writev(sd, iov, iovcnt, timeout);
 	if (l == MI_FAILURE)
 		return MI_FAILURE;
@@ -1,320 +1,233 @@
-<HTML>
-<HEAD><TITLE>Milter API</TITLE></HEAD>
-<BODY>
+<html>
+<head><title>Milter API</title></head>
+<body>
 <!--
-$Id: api.html,v 1.35 2006/11/30 23:09:23 ca Exp $
+$Id: api.html,v 1.18 2004/04/28 23:26:51 msk Exp $
 -->
-<H1>Milter API</H1>
+<h1>Milter API</h1>

-<H2>Contents</H2>
-<UL>
-    <LI><A HREF="#LibraryControlFunctions">Library Control Functions</A>
-    <LI><A HREF="#DataAccessFunctions">Data Access Functions</A>
-    <LI><A HREF="#MessageModificationFunctions">Message Modification Functions</A>
-    <LI><A HREF="#Callbacks">Callbacks</A>
-    <LI><A HREF="#Miscellaneous">Miscellaneous</A>
-</UL>
+<h2>Contents</h2>
+<ul>
+    <li>Library Control Functions
+    <li>Data Access Functions
+    <li>Message Modification Functions
+    <li>Callbacks
+</ul>

-<H2><A NAME="LibraryControlFunctions">Library Control Functions</A></H2> 
+<h2>Library Control Functions</h2> 

-Before handing control to libmilter (by calling
-<A HREF="smfi_main.html">smfi_main</A>), a filter may call the following
-functions to set libmilter parameters.
-In particular, the filter must call
-<A HREF="smfi_register.html">smfi_register</A> to register its callbacks.
-Each function will return either MI_SUCCESS or MI_FAILURE to
+Before handing control to libmilter (by calling <a
+href="smfi_main.html">smfi_main</a>), a filter may call the following
+functions to set libmilter parameters.  In particular, the filter must
+call <a href="smfi_register.html">smfi_register</a> to register its
+callbacks.  Each function will return either MI_SUCCESS or MI_FAILURE to
 indicate the status of the operation.  
-
-<P>
+<p>
 None of these functions communicate with the MTA.  All alter the
-library's state, some of which is communicated to the MTA inside
-<A HREF="smfi_main.html">smfi_main</A>.
+library's state, some of which is communicated to the MTA inside <a
+href="smfi_main.html">smfi_main</a>.
+<p>
+<table border="1" cellspacing=0 cellpadding=2><tr bgcolor="#dddddd"><th>Function</th><th>Description</th></tr>

-<P>
-<TABLE BORDER="1" CELLSPACING=0 CELLPADDING=2><TR BGCOLOR="#dddddd"><TH>Function</TH><TH>Description</TH></TR>
+<tr><td><a href="smfi_opensocket.html">smfi_opensocket</a></td><td>Try to create the interface socket.</td></tr>

-<TR><TD><A HREF="smfi_opensocket.html">smfi_opensocket</A></TD><TD>Try to create the interface socket.</TD></TR>
+<tr><td><a href="smfi_register.html">smfi_register</a></td><td>Register a filter.</td></tr>

-<TR><TD><A HREF="smfi_register.html">smfi_register</A></TD><TD>Register a filter.</TD></TR>
+<tr><td><a href="smfi_setconn.html">smfi_setconn</a></td><td>Specify socket to use.</td></tr>

-<TR><TD><A HREF="smfi_setconn.html">smfi_setconn</A></TD><TD>Specify socket to use.</TD></TR>
+<tr><td><a href="smfi_settimeout.html">smfi_settimeout</a></td><td>Set timeout.</td></tr>

-<TR><TD><A HREF="smfi_settimeout.html">smfi_settimeout</A></TD><TD>Set timeout.</TD></TR>
+<tr><td><a href="smfi_setbacklog.html">smfi_setbacklog</a></td><td>Define the incoming <i>listen</i>(2) queue size.</td></tr>

-<TR><TD><A HREF="smfi_setbacklog.html">smfi_setbacklog</A></TD><TD>Define the incoming <CODE>listen(2)</CODE> queue size.</TD></TR>
+<tr><td><a href="smfi_setdbg.html">smfi_setdbg</a></td><td>Set the milter library debugging (tracing) level.</td></tr>

-<TR><TD><A HREF="smfi_setdbg.html">smfi_setdbg</A></TD><TD>Set the milter library debugging (tracing) level.</TD></TR>
+<tr><td><a href="smfi_stop.html">smfi_stop</a></td><td>Cause an orderly shutdown.</td></tr>

-<TR><TD><A HREF="smfi_stop.html">smfi_stop</A></TD><TD>Cause an orderly shutdown.</TD></TR>
+<tr><td><a href="smfi_main.html">smfi_main</a></td><td>Hand control to libmilter.</td></tr>

-<TR><TD><A HREF="smfi_main.html">smfi_main</A></TD><TD>Hand control to libmilter.</TD></TR>
+</table>

-</TABLE>
-
-<H2><A NAME="DataAccessFunctions">Data Access Functions</A></H2>
+<h2>Data Access Functions</h2>

 The following functions may be called from within the filter-defined callbacks
 to access information about the current connection or message.  
-<P>
-<TABLE BORDER="1" CELLSPACING=0 CELLPADDING=2><TR bgcolor="#dddddd"><TH>Function</TH><TH>Description</TH></TR>
-<TR><TD><A HREF="smfi_getsymval.html">smfi_getsymval</A></TD><TD>Return the value
-of a symbol.</TD></TR>
+<p>
+<table border="1" cellspacing=0 cellpadding=2><tr bgcolor="#dddddd"><th>Function</th><th>Description</th></tr>
+<tr><td><a href="smfi_getsymval.html">smfi_getsymval</a></td><td>Return the value
+of a symbol.</td></tr>

-<TR><TD><A HREF="smfi_getpriv.html">smfi_getpriv</A></TD><TD>Get the private data
-pointer.</TD></TR>
+<tr><td><a href="smfi_getpriv.html">smfi_getpriv</a></td><td>Get the private data
+pointer.</td></tr>

-<TR><TD><A HREF="smfi_setpriv.html">smfi_setpriv</A></TD><TD>Set the private data
-pointer.</TD></TR>
+<tr><td><a href="smfi_setpriv.html">smfi_setpriv</a></td><td>Set the private data
+pointer.</td></tr>

-<TR><TD><A HREF="smfi_setreply.html">smfi_setreply</A></TD><TD>Set the specific
-reply code to be used.</TD></TR>
+<tr><td><a href="smfi_setreply.html">smfi_setreply</a></td><td>Set the specific
+reply code to be used.</td></tr>

-<TR><TD><A HREF="smfi_setmlreply.html">smfi_setmlreply</A></TD><TD>Set the
-specific multi-line reply to be used.</TD></TR>
+<tr><td><a href="smfi_setmlreply.html">smfi_setmlreply</a></td><td>Set the
+specific multi-line reply to be used.</td></tr>

-</TABLE>
+</table>

-<H2><A NAME="MessageModificationFunctions">Message Modification Functions</A></H2>
+<h2>Message Modification Functions</h2>

 The following functions change a message's contents and attributes.
-<EM>They may only be called in <A HREF="xxfi_eom.html">xxfi_eom</A></EM>.
+<b>They may only be called in <a href="xxfi_eom.html">xxfi_eom</a></b>.
 All of these functions may invoke additional communication with the MTA.
 They will return either MI_SUCCESS or MI_FAILURE to indicate the status of
 the operation.

-<P>
+<p>
 A filter must have set the appropriate flag (listed below) in the
-description passed to <A HREF="smfi_register.html">smfi_register</A>
+description passed to <a href="smfi_register.html">smfi_register</a>
 to call any message modification function.  Failure to do so will
 cause the MTA to treat a call to the function as a failure of the
 filter, terminating its connection.

-<P>
+<p>
 Note that the status returned indicates only whether or not the
 filter's message was successfully sent to the MTA, not whether or not
-the MTA performed the requested operation.  For example,
-<A HREF="smfi_addheader.html">smfi_addheader</A>, when called with an
+the MTA performed the requested operation.  For example, <a
+href="smfi_addheader.html">smfi_addheader</a>, when called with an
 illegal header name, will return MI_SUCCESS even though the MTA may
 later refuse to add the illegal header.
-<P>
-<TABLE BORDER="1" CELLSPACING=0 CELLPADDING=2><TR BGCOLOR="#dddddd"><TH>Function</TH><TH>Description</TH><TH>SMFIF_* flag</TR>
-<TR><TD><A HREF="smfi_addheader.html">smfi_addheader</A></TD><TD>Add a header to
-the message.</TD><TD>SMFIF_ADDHDRS</TD></TR> 
+<p>
+<table border="1" cellspacing=0 cellpadding=2><tr bgcolor="#dddddd"><th>Function</th><th>Description</th><th>SMFIF_* flag</tr>
+<tr><td><a href="smfi_addheader.html">smfi_addheader</a></td><td>Add a header to
+the message.</td><td>SMFIF_ADDHDRS</td></tr> 

-<TR><TD><A HREF="smfi_chgheader.html">smfi_chgheader</A></TD><TD>Change or delete a header.</TD><TD>SMFIF_CHGHDRS</TD></TR> 
+<tr><td><a href="smfi_chgheader.html">smfi_chgheader</a></td><td>Change or delete a header.</td><td>SMFIF_CHGHDRS</td></tr> 

-<TR><TD><A HREF="smfi_insheader.html">smfi_insheader</A></TD><TD>Insert a
-header into the message.</TD><TD>SMFIF_ADDHDRS</TD></TR> 
+<tr><td><a href="smfi_insheader.html">smfi_insheader</a></td><td>Insert a
+header into the message.</td><td>SMFIF_ADDHDRS</td></tr> 

-<TR><TD><A HREF="smfi_chgfrom.html">smfi_chgfrom</A></TD><TD>Change the
-envelope sender address.</TD><TD>SMFIF_CHGFROM</TD></TR>
+<tr><td><a href="smfi_addrcpt.html">smfi_addrcpt</a></td><td>Add a recipient to
+the envelope.</td><td>SMFIF_ADDRCPT</td></tr>

-<TR><TD><A HREF="smfi_addrcpt.html">smfi_addrcpt</A></TD><TD>Add a recipient to
-the envelope.</TD><TD>SMFIF_ADDRCPT</TD></TR>
+<tr><td><a href="smfi_delrcpt.html">smfi_delrcpt</a></td><td>Delete a recipient
+from the envelope.</td><td>SMFIF_DELRCPT</td></tr>

-<TR><TD><A HREF="smfi_addrcpt_par.html">smfi_addrcpt_par</A></TD><TD>Add
-a recipient including ESMTP parameter to the envelope.
-</TD><TD>SMFIF_ADDRCPT_PAR</TD></TR>
+<tr><td><a href="smfi_replacebody.html">smfi_replacebody</a></td><td>Replace the
+body of the message.</td><td>SMFIF_CHGBODY</td></tr>

-<TR><TD><A HREF="smfi_delrcpt.html">smfi_delrcpt</A></TD><TD>Delete a recipient
-from the envelope.</TD><TD>SMFIF_DELRCPT</TD></TR>
+</table>

-<TR><TD><A HREF="smfi_replacebody.html">smfi_replacebody</A></TD><TD>Replace the
-body of the message.</TD><TD>SMFIF_CHGBODY</TD></TR>
-
-</TABLE>
-
-<H2>Other Message Handling Functions</H2>
+<h2>Other Message Handling Functions</h2>

 The following functions provide special case handling instructions for
 milter or the MTA, without altering the content or status of the message.
-<EM>They too may only be called in <A HREF="xxfi_eom.html">xxfi_eom</A></EM>.
+<b>They too may only be called in <a href="xxfi_eom.html">xxfi_eom</a></b>.
 All of these functions may invoke additional communication with the MTA.
 They will return either MI_SUCCESS or MI_FAILURE to indicate the status of
 the operation.

-<P>
+<p>
 Note that the status returned indicates only whether or not the
 filter's message was successfully sent to the MTA, not whether or not
 the MTA performed the requested operation.

-<P>
-<TABLE BORDER="1" CELLSPACING=0 CELLPADDING=2><TR BGCOLOR="#dddddd"><TH>Function</TH><TH>Description</TH></TR>
-<TR><TD><A HREF="smfi_progress.html">smfi_progress</A></TD><TD>Report operation in progress.</TD></TR>
+<p>
+<table border="1" cellspacing=0 cellpadding=2><tr bgcolor="#dddddd"><th>Function</th><th>Description</th></tr>
+<tr><td><a href="smfi_progress.html">smfi_progress</a></td><td>Report operation in progress.</td></tr>

-<TR><TD><A HREF="smfi_quarantine.html">smfi_quarantine</A></TD><TD>Quarantine a message.</TD></TR>
+<tr><td><a href="smfi_quarantine.html">smfi_quarantine</a></td><td>Quarantine a message.</td></tr>

-</TABLE>
+</table>

-<H2><A NAME="Callbacks">Callbacks</A></H2>
+<h2><a name="callbacks">Callbacks</a></h2>

 The filter should implement one or more of the following callbacks,
-which are registered via <A HREF="smfi_register.html">smfi_register</A>:
+which are registered via <a href="smfi_register.html">smfi_register</a>:
+<p>
+<table border="1" cellspacing=0 cellpadding=2><tr bgcolor="#dddddd"><th>Function</th><th>Description</th></tr>

-<P>
-<TABLE BORDER="1" CELLSPACING=0 CELLPADDING=2><TR BGCOLOR="#dddddd"><TH>Function</TH><TH>Description</TH></TR>
+<tr><td><a href="xxfi_connect.html">xxfi_connect</a></td><td>connection info</td></tr>

-<TR><TD><A HREF="xxfi_connect.html">xxfi_connect</A></TD><TD>connection info</TD></TR>
+<tr><td><a href="xxfi_helo.html">xxfi_helo</a></td><td>SMTP HELO/EHLO command</td></tr>

-<TR><TD><A HREF="xxfi_helo.html">xxfi_helo</A></TD><TD>SMTP HELO/EHLO command</TD></TR>
+<tr><td><a href="xxfi_envfrom.html">xxfi_envfrom</a></td><td>envelope sender</td></tr>

-<TR><TD><A HREF="xxfi_envfrom.html">xxfi_envfrom</A></TD><TD>envelope sender</TD></TR>
+<tr><td><a href="xxfi_envrcpt.html">xxfi_envrcpt</a></td><td>envelope recipient</td></tr>

-<TR><TD><A HREF="xxfi_envrcpt.html">xxfi_envrcpt</A></TD><TD>envelope recipient</TD></TR>
+<tr><td><a href="xxfi_header.html">xxfi_header</a></td><td>header</td></tr>

-<TR><TD><A HREF="xxfi_data.html">xxfi_data</A></TD><TD>DATA command</TD></TR>
+<tr><td><a href="xxfi_eoh.html">xxfi_eoh</a></td><td>end of header</td></tr>

-<TR><TD><A HREF="xxfi_unknown.html">xxfi_unknown</A></TD><TD>Unknown SMTP command</TD></TR>
+<tr><td><a href="xxfi_body.html">xxfi_body</a></td><td>body block</td></tr>

-<TR><TD><A HREF="xxfi_header.html">xxfi_header</A></TD><TD>header</TD></TR>
+<tr><td><a href="xxfi_eom.html">xxfi_eom</a></td><td>end of message</td></tr>

-<TR><TD><A HREF="xxfi_eoh.html">xxfi_eoh</A></TD><TD>end of header</TD></TR>
+<tr><td><a href="xxfi_abort.html">xxfi_abort</a></td><td>message aborted</td></tr>

-<TR><TD><A HREF="xxfi_body.html">xxfi_body</A></TD><TD>body block</TD></TR>
+<tr><td><a href="xxfi_close.html">xxfi_close</a></td><td>connection cleanup</td></tr>

-<TR><TD><A HREF="xxfi_eom.html">xxfi_eom</A></TD><TD>end of message</TD></TR>
+</table>

-<TR><TD><A HREF="xxfi_abort.html">xxfi_abort</A></TD><TD>message aborted</TD></TR>
-
-<TR><TD><A HREF="xxfi_close.html">xxfi_close</A></TD><TD>connection cleanup</TD></TR>
-
-<TR><TD><A HREF="xxfi_negotiate.html">xxfi_negotiate</A></TD><TD>option negotiattion</TD></TR>
-
-</TABLE>
-
-<P>
+<p>
 The above callbacks should all return one of the following return values,
 having the indicated meanings.  Any return other than one of the below
 values constitutes an error, and will cause sendmail to terminate its
 connection to the offending filter.

-<P><A NAME="conn-spec">Milter</A> distinguishes between recipient-,
+<p><a name="conn-spec">Milter</a> distinguishes between recipient-,
 message-, and connection-oriented routines.  Recipient-oriented
 callbacks may affect the processing of a single message recipient;
 message-oriented callbacks, a single message; connection-oriented
 callbacks, an entire connection (during which multiple messages may be
 delivered to multiple sets of recipients).
-<A HREF="xxfi_envrcpt.html">xxfi_envrcpt</A> is recipient-oriented.
-<A HREF="xxfi_connect.html">xxfi_connect</A>,
-<A HREF="xxfi_helo.html">xxfi_helo</A> and
-<A HREF="xxfi_close.html">xxfi_close</A> are connection-oriented.  All
+<a href="xxfi_envrcpt.html">xxfi_envrcpt</a> is recipient-oriented.
+<a href="xxfi_connect.html">xxfi_connect</a>,
+<a href="xxfi_helo.html">xxfi_helo</a> and
+<a href="xxfi_close.html">xxfi_close</a> are connection-oriented.  All
 other callbacks are message-oriented.

-<P>
-<TABLE BORDER="1" CELLSPACING=0 CELLPADDING=2>
-  <TR BGCOLOR="#dddddd"><TH>Return value</TH><TH>Description</TH></TR>
-  <TR VALIGN="TOP">
-     <TD>SMFIS_CONTINUE</TD> 
-     <TD>Continue processing the current connection, message, or recipient.
-     </TD>
-  </TR>
-  <TR VALIGN="TOP">
-     <TD>SMFIS_REJECT</TD>
-     <TD>For a connection-oriented routine, reject this connection; call <A HREF="xxfi_close.html">xxfi_close</A>.<BR>
+<p>
+<table border="1" cellspacing=0 cellpadding=2>
+  <tr bgcolor="#dddddd"><th>Return value</th><th>Description</th></tr>
+  <tr valign="top">
+     <td>SMFIS_CONTINUE</td> 
+     <td>Continue processing the current connection, message, or recipient.
+     </td>
+  </tr>
+  <tr valign="top">
+     <td>SMFIS_REJECT</td>
+     <td>For a connection-oriented routine, reject this connection; call <a href="xxfi_close.html">xxfi_close</a>.<br>
        For a message-oriented routine (except 
-	<A HREF="xxfi_eom.html">xxfi_eom</A> or
-        <A HREF="xxfi_abort.html">xxfi_abort</A>), reject this message.<BR>
+	<a href="xxfi_eom.html">xxfi_eom</a> or
+        <a href="xxfi_abort.html">xxfi_abort</a>), reject this message.<br>
 	For a recipient-oriented routine, reject the current recipient (but continue processing the current message).
-     </TD>
-  </TR>
-  <TR valign="top">
-     <TD>SMFIS_DISCARD</TD>
-     <TD>For a message- or recipient-oriented routine, accept this message, but silently discard it.<BR>
+     </td>
+  </tr>
+  <tr valign="top">
+     <td>SMFIS_DISCARD</td>
+     <td>For a message- or recipient-oriented routine, accept this message, but silently discard it.<br>
     SMFIS_DISCARD should not be returned by a connection-oriented routine.
-     </TD>
-  </TR>
-  <TR valign="top">
-     <TD>SMFIS_ACCEPT</TD>
-     <TD>For a connection-oriented routine, accept this connection without further filter processing; call <A HREF="xxfi_close.html">xxfi_close</A>.<BR>
-         For a message- or recipient-oriented routine, accept this message without further filtering.<BR>
-     </TD>
-  </TR>
-  <TR valign="top">
-     <TD>SMFIS_TEMPFAIL</TD>
-     <TD>Return a temporary failure, i.e., the corresponding SMTP command will return an appropriate 4xx status code.
-	 For a message-oriented routine (except <A HREF="xxfi_envfrom.html">xxfi_envfrom</A>), fail for this message. <BR>
-	 For a connection-oriented routine, fail for this connection; call <A HREF="xxfi_close.html">xxfi_close</A>. <BR>
+     </td>
+  </tr>
+  <tr valign="top">
+     <td>SMFIS_ACCEPT</td>
+     <td>For a connection-oriented routine, accept this connection without further filter processing; call <a href="xxfi_close.html">xxfi_close</a>.<br>
+         For a message- or recipient-oriented routine, accept this message without further filtering.<br>
+     </td>
+  </tr>
+  <tr valign="top">
+     <td>SMFIS_TEMPFAIL</td>
+     <td>Return a temporary failure, i.e., the corresponding SMTP command will return an appropriate 4xx status code.
+	 For a message-oriented routine (except <a href="xxfi_envfrom.html">xxfi_envfrom</a>), fail for this message. <br>
+	 For a connection-oriented routine, fail for this connection; call <a href="xxfi_close.html">xxfi_close</a>. <br>
 	 For a recipient-oriented routine, only fail for the current recipient; continue message processing.
-     </TD>
-  </TR>
+     </td>
+  </tr>
+</table>

-  <TR valign="top">
-     <TD><A NAME="SMFIS_SKIP">SMFIS_SKIP</A></TD>
-     <TD>Skip further callbacks of the same type in this transaction.
-	Currently this return value is only allowed in
-	<A HREF="xxfi_body.html">xxfi_body()</A>.
-	It can be used if a milter has received sufficiently many
-	body chunks to make a decision, but still wants to invoke
- 	message modification functions that are only allowed to be called from
-	<A HREF="xxfi_eom.html">xxfi_eom()</A>.
-	Note: the milter <EM>must</EM>
-	<A HREF="xxfi_negotiate.html">negotiate</A>
-	this behavior with the MTA, i.e., it must check whether
-	the protocol action
-	<A HREF="xxfi_negotiate.html#SMFIP_SKIP"><CODE>SMFIP_SKIP</CODE></A>
-	is available and if so, the milter must request it.
-     </TD>
-  </TR>
-
-  <TR valign="top">
-     <TD><A NAME="SMFIS_NOREPLY">SMFIS_NOREPLY</A></TD>
-     <TD>Do not send a reply back to the MTA.
-	The milter <EM>must</EM>
-	<A HREF="xxfi_negotiate.html">negotiate</A>
-	this behavior with the MTA, i.e., it must check whether
-	the appropriate protocol action
-	<A HREF="xxfi_negotiate.html#SMFIP_NR_"><CODE>SMFIP_NR_*</CODE></A>
-	is available and if so, the milter must request it.
-	If you set the
-	<A HREF="xxfi_negotiate.html#SMFIP_NR_"><CODE>SMFIP_NR_*</CODE></A>
-	protocol action for a callback, that callback <EM>must</EM>
-	always reply with
-	SMFIS_NOREPLY.
-	Using any other reply code is a violation of the API.
-	If in some cases your callback may return another value
-	(e.g., due to some resource shortages), then you
-	<EM>must not</EM> set
-	<A HREF="xxfi_negotiate.html#SMFIP_NR_"><CODE>SMFIP_NR_*</CODE></A>
-	and you must use
-	SMFIS_CONTINUE as the default return code.
-	(Alternatively you can try to delay reporting the problem to
-	a later callback for which
-	<A HREF="xxfi_negotiate.html#SMFIP_NR_"><CODE>SMFIP_NR_*</CODE></A>
-	is not set.)
-     </TD>
-  </TR>
-
-</TABLE>
-
-<H2><A NAME="Miscellaneous">Miscellaneous</A></H2>
-
-<P>
-<TABLE BORDER="1" CELLSPACING=0 CELLPADDING=2><TR BGCOLOR="#dddddd"><TH>Function</TH><TH>Description</TH></TR>
-
-<TR><TD><A HREF="smfi_version.html">smfi_version</A></TD><TD>libmilter (runtime) version info</TD></TR>
-
-<TR><TD><A HREF="smfi_setsymlist.html">smfi_setsymlist</A></TD><TD>
-Set the list of macros that the milter wants to receive from the MTA
-for a protocol stage.
-</TD></TR>
-
-</TABLE>
-
-<P>
-<TABLE BORDER="1" CELLSPACING=0 CELLPADDING=2><TR BGCOLOR="#dddddd"><TH>Constant</TH><TH>Description</TH></TR>
-
-<TR><TD><A HREF="smfi_version.html">SMFI_VERSION</A></TD><TD>libmilter (compile time) version info</TD></TR>
-
-</TABLE>
-
-
-<HR SIZE="1">
-<FONT SIZE="-1">
-Copyright (c) 2000, 2003, 2006 Sendmail, Inc. and its suppliers.
+<hr size="1">
+<font size="-1">
+Copyright (c) 2000, 2003 Sendmail, Inc. and its suppliers.
 All rights reserved.
-<BR>
+<br>
 By using this file, you agree to the terms and conditions set
 forth in the LICENSE.
-</FONT>
-</BODY>
-</HTML>
+</font>
+</body>
+</html>
@@ -1,23 +1,23 @@
-<HTML>
-<HEAD>
-<TITLE>Architecture</TITLE>
-</HEAD>
-<BODY>
+<html>
+<head>
+<title>Architecture</title>
+</head>
+<body>
 <!--
-$Id: design.html,v 1.12 2006/08/08 20:55:57 ca Exp $
+$Id: design.html,v 1.11 2003/03/05 19:57:54 ca Exp $
 -->

-<H1>Architecture</H1>
+<h1>Architecture</h1>

-<H2>Contents</H2>
+<h2>Contents</h2>

-<UL>
-    <LI>Design Goals
-    <LI>Implementing Filtering Policies
-    <LI>MTA - Filter Communication
-</UL>
+<ul>
+    <li>Design Goals
+    <li>Implementing Filtering Policies
+    <li>MTA - Filter Communication
+</ul>

-<H2>Goals</H2>
+<h2>Goals</h2>

 The Sendmail Content Management API (Milter) provides an interface for
 third-party software to validate and modify messages as they pass
@@ -28,7 +28,7 @@ recipients, headers, and body.  The MTA configuration file specifies
 which filters are to be applied, and in what order, allowing an
 administrator to combine multiple independently-developed filters.

-<P>
+<p>
 We expect to see both vendor-supplied, configurable mail filtering
 applications and a multiplicity of script-like filters designed by and
 for MTA administrators.  A certain degree of coding sophistication and
@@ -37,7 +37,7 @@ allows filters to exercise fine-grained control at the SMTP level.
 However, as will be seen in the example, many filtering applications
 can be written with relatively little protocol knowledge.

-<P>
+<p>
 Given these expectations, the API is designed to achieve the following
 goals:

@@ -47,7 +47,7 @@ goals:
        (of course, they can if required, but that is a local issue);
        this will simplify coding
        and limit the impact of security flaws in the filter program.
-<P>
+<p>
  <LI>Reliability.
        Coding failures in a Milter process that cause that process
        to hang or core-dump
@@ -59,7 +59,7 @@ goals:
        The latter failure mode will generally have sendmail return
        a 4xx SMTP code (although in later phases of the SMTP protocol
        it may cause the mail to be queued for later processing).
-<P>
+<p>
  <LI>Simplicity.
        The API should make implementation of a new filter
        no more difficult than absolutely necessary.
@@ -70,12 +70,12 @@ goals:
          <LI>Provide all interfaces required
              while avoiding unnecessary pedanticism.
        </UL>
-<P>
+<p>
  <LI>Performance.
        Simple filters should not seriously impact overall MTA performance.
 </OL>

-<H2>Implementing Filtering Policies</H2>
+<h2>Implementing Filtering Policies</h2>

 Milter is designed to allow a server administrator to combine
 third-party filters to implement a desired mail filtering policy.  For
@@ -87,16 +87,16 @@ engine, then via a large-scale spam-catching service, and finally
 append the desired footer if the message still met requisite criteria.
 Any of these filters could be added or changed independently.

-<P>
+<p>
 Thus the site administrator, not the filter writer, controls the
 overall mail filtering environment.  In particular, he/she must decide
 which filters are run, in what order they are run, and how they
 communicate with the MTA.  These parameters, as well as the
 actions to be taken if a filter becomes unavailable, are selectable
-during MTA configuration.  <A href="installation.html">Further
-details</A> are available later in this document.
+during MTA configuration.  <a href="installation.html">Further
+details</a> are available later in this document.

-<H2>MTA - Filter communication</H2>
+<h2>MTA - Filter communication</h2>

 Filters run as separate processes, outside of the sendmail address
 space.  The benefits of this are threefold:
@@ -112,36 +112,36 @@ space.  The benefits of this are threefold:
        the parallelism inherent in multiple processes.</LI>
 </OL>

-<P>
+<p>
 Each filter may communicate with multiple MTAs at the same time over
-local or remote connections, using multiple threads of execution.
-<A HREF="#figure-1">Figure 1</A> illustrates a possible network of
+local or remote connections, using multiple threads of execution.  <a
+href="#figure-1">Figure 1</a> illustrates a possible network of
 communication channels between a site's filters, its MTAs, and other
 MTAs on the network:
-</P>
-<DIV align="center">
-<A name="figure-1"><IMG src="figure1.jpg" ALT=""></A><BR>
-<B>Figure 1: A set of MTA's interacting with a set of filters.</B>
-</DIV>
-<P>
+</p>
+<div align="center">
+<a name="figure-1"><img src="figure1.jpg" ALT=""></A><br>
+<b>Figure 1: A set of MTA's interacting with a set of filters.</b>
+</div>
+<p>
 The Milter library (libmilter) implements the communication protocol.
 It accepts connections from various MTAs, passes the relevant data to
 the filter through callbacks, then makes appropriate responses based
 on return codes.  A filter may also send data to the MTA as a result
-of library calls.  <A href="#figure-2">Figure 2</A> shows a single
+of library calls.  <a href="#figure-2">Figure 2</a> shows a single
 filter process processing messages from two MTAs:
-</P>
-<DIV align="center">
-<IMG src="figure2.jpg" ALT=""><BR>
-<B>Figure 2: A filter handling simultaneous requests from two MTA's.</B>
-</DIV>
-<HR size="1">
-<FONT size="-1">
+</p>
+<div align="center">
+<img src="figure2.jpg" ALT=""><br>
+<b>Figure 2: A filter handling simultaneous requests from two MTA's.</b>
+</div>
+<hr size="1">
+<font size="-1">
 Copyright (c) 2000, 2003 Sendmail, Inc. and its suppliers.
 All rights reserved.
-<BR>
+<br>
 By using this file, you agree to the terms and conditions set
 forth in the LICENSE.
-</FONT>
-</BODY>
-</HTML>
+</font>
+</body>
+</html>
@@ -1,22 +1,22 @@
-<HTML>
-<HEAD>
-<TITLE>Filtering Mail with Sendmail</TITLE>
-</HEAD>
-<BODY>
+<html>
+<head>
+<title>Filtering Mail with Sendmail</title>
+</head>
+<body>
 <!--
-$Id: index.html,v 1.13 2006/08/08 20:55:57 ca Exp $
+$Id: index.html,v 1.12 2003/03/05 19:57:54 ca Exp $
 -->

-<H1>Filtering Mail with Sendmail</H1>
+<h1>Filtering Mail with Sendmail</h1>

 <!--
-<P><B>Disclaimer</B>: 
+<P><b>Disclaimer</b>: 
 This preliminary API description is provided for review only.  This
 specification may change based on feedback from reviewers, and does
 not bind Sendmail to offer this functionality in any release.
 -->

-<H2>Introduction</H2>
+<h2>Introduction</h2>

 <P>
 Sendmail's Content Management API (milter) provides third-party
@@ -26,67 +26,67 @@ content and meta-information.  Filtering policies implemented by
 Milter-conformant filters may then be centrally configured and
 composed in an end-user's MTA configuration file.

-<P>
+<p>
 Possible uses for filters include spam rejection, virus
 filtering, and content control.  In general, Milter seeks to address
 site-wide filtering concerns in a scalable way.  Individual users' mail
 filtering needs (e.g. sorting messages by subject) are left to
-client-level programs such as <A href="http://www.procmail.org">Procmail</A>.
+client-level programs such as <a href="http://www.procmail.org">Procmail</a>.

 <P>
 This document is a technical introduction intended for those
 interested in developing Milter filters.  It includes:
-<UL>
-<LI>A description of Milter's design goals.
+<ul>
+<li>A description of Milter's design goals.

-<LI>An explanation of Milter application architecture, including
+<li>An explanation of Milter application architecture, including
 interactions between the support library and user code, and between
 filters and the MTA.

-<LI>A specification of the C application programming interface.
-<LI>An example of a simple Milter filter.
-</UL>
+<li>A specification of the C application programming interface.
+<li>An example of a simple Milter filter.
+</ul>

-<H2>Contents</H2>
+<h2>Contents</h2>

-<UL>
-<LI><A href="design.html">Architecture</A>
-<UL>
-    <LI>Design Goals
-    <LI>Implementing Filtering Policies
-    <LI>MTA - Filter communication
-</UL>
-<LI><A href="overview.html">Technical Overview</A>
-<UL>
-    <LI>Initialization
-    <LI>Control flow
-    <LI>Multithreading
-    <LI>Resource Management
-    <LI>Signal Handling
-</UL>
-<LI><A href="api.html">API Documentation</A>
-<UL>
-    <LI>Library Control Functions
-    <LI>Data Access Functions
-    <LI>Message Modification Functions
-    <LI>Callbacks
-</UL>
-<LI><A href="installation.html">Installation and Configuration</A>
-<UL>
-    <LI>Compiling and Installing Your Filter
-    <LI>Configuring Sendmail
-</UL>
-<LI><A href="sample.html">A Sample Filter</A>
-<!-- <LI><A href="other.html">Other Sources of Information</A> -->
-</UL>
+<ul>
+<li><a href="design.html">Architecture</a>
+<ul>
+    <li>Design Goals
+    <li>Implementing Filtering Policies
+    <li>MTA - Filter communication
+</ul>
+<li><a href="overview.html">Technical Overview</a>
+<ul>
+    <li>Initialization
+    <li>Control flow
+    <li>Multithreading
+    <li>Resource Management
+    <li>Signal Handling
+</ul>
+<li><a href="api.html">API Documentation</a>
+<ul>
+    <li>Library Control Functions
+    <li>Data Access Functions
+    <li>Message Modification Functions
+    <li>Callbacks
+</ul>
+<li><a href="installation.html">Installation and Configuration</a>
+<ul>
+    <li>Compiling and Installing Your Filter
+    <li>Configuring Sendmail
+</ul>
+<li><a href="sample.html">A Sample Filter</a>
+<!-- <li><a href="other.html">Other Sources of Information</a> -->
+</ul>

-<HR size="1">
-<FONT size="-1">
+<hr size="1">
+<font size="-1">
 Copyright (c) 2000, 2001, 2003 Sendmail, Inc. and its suppliers.
 All rights reserved.
-<BR>
+<br>
 By using this file, you agree to the terms and conditions set
 forth in the LICENSE.
-</FONT>
-</BODY>
-</HTML>
+</font>
+</body>
+</html>
@@ -1,90 +1,96 @@
-<HTML>
-<HEAD><TITLE>Installation and Configuration</TITLE>
-</HEAD>
-<BODY>
+<html>
+<head><title>Installation and Configuration</title>
+</head>
+<body>
 <!--
-$Id: installation.html,v 1.23 2006/08/31 17:16:03 ca Exp $
+$Id: installation.html,v 1.20 2003/03/05 19:57:54 ca Exp $
 -->
-<H1>Installation</H1>
-<H2>Contents</H2>
-<UL>
-    <LI><A href="#compile">Compiling and Installing Your Filter</A>
-    <LI><A href="#config">Configuring Sendmail</A>
-</UL>
+<h1>Installation</h1>
+<h2>Contents</h2>
+<ul>
+    <li><a href="#compile">Compiling and Installing Your Filter</a>
+    <li><a href="#config">Configuring Sendmail</a>
+</ul>

-<H2><A name="compile">Compiling and Installing Your Filter</A></H2>
+<h2><a name="compile">Compiling and Installing Your Filter</A></h2>

 To compile a filter, modify the Makefile provided with the sample program, or:
-<UL>
-    <LI>Put the include and Sendmail directories in your include path
+<ul>
+    <li>Put the include and Sendmail directories in your include path
    (e.g. -I/path/to/include -I/path/to/sendmail).  

-    <LI>Make sure libmilter.a is in your library path, and link your
+    <li>Make sure libmilter.a is in your library path, and link your
    application with it (e.g. "-lmilter").

-    <LI>Compile with pthreads, either by using -pthread for gcc, or
+    <li>Compile with pthreads, either by using -pthread for gcc, or
    linking with a pthreads support library (-lpthread).
-</UL>
+</ul>
 Your compile command line will look like
-<PRE>
+<pre>
 cc -I/path/to/include -I/path/to/sendmail -c myfile.c
-</PRE>
+</pre>
 and your linking command line will look something like
-<PRE>
+<pre>
 cc -o myfilter [object-files] -L[library-location] -lmilter -pthread
-</PRE>
+</pre>

-<H2><A name="config">Configuring Sendmail</A></H2>
+<H2><a name="config">Configuring Sendmail</A></H2>

-If you use a sendmail version older than 8.13 please see
+First, you must compile sendmail with MILTER defined.
+If you use a sendmail version older than 8.12 please see
 the instructions for your version.
-The default compilation options for sendmail enable support
-for milters since 8.13.
+To do this, add the following lines to your build
+configuration file (devtools/Site/config.site.m4)
+<pre>
+APPENDDEF(`conf_sendmail_ENVDEF', `-DMILTER')
+</pre>
+
+then type <code>./Build -c</code> in your sendmail directory.

 <P>
 Next, you must add the desired filters to your sendmail configuration
 (.mc) file.
 Mail filters have three equates:
-The required <CODE>S=</CODE> equate specifies the socket where
-sendmail should look for the filter; the optional <CODE>F=</CODE> and
-<CODE>T=</CODE> equates specify flags and timeouts, respectively.
-All equates names, equate field names, and flag values are case sensitive.
+The required <code>S=</code> equate specifies the socket where
+sendmail should look for the filter; The optional <code>F=</code> and
+<code>T=</code> equates specify flags and timeouts, respectively.  All
+equates names, equate field names, and flag values are case sensitive.

 <P>
-The current flags (<CODE>F=</CODE>) are:
-<P>
-<TABLE cellspacing="1" cellpadding=4 border=1>
-<TR bgcolor="#dddddd" align=left valign=top>
-<TH>Flag</TH>   <TH align="center">Meaning</TH>
+The current flags (<code>F=</code>) are:
+<p>
+<table cellspacing="1" cellpadding=4 border=1>
+<tr bgcolor="#dddddd" align=left valign=top>
+<th>Flag</TH>   <th align="center">Meaning</TH>
 </TR>
-<TR align="left" valign=top>
+<tr align="left" valign=top>
 <TD>R</TD>      <TD>Reject connection if filter unavailable</TD>
 </TR>
-<TR align="left" valign=top>
+<tr align="left" valign=top>
 <TD>T</TD>      <TD>Temporary fail connection if filter unavailable</TD>
 </TR>
 </TABLE>

 If a filter is unavailable or unresponsive and no flags have been
 specified, the MTA will continue normal handling of the current
+connection.  The MTA will try to contact the filter again on each new
 connection.
-The MTA will try to contact the filter again on each new connection.

 <P>
-There are three fields inside of the <CODE>T=</CODE> equate: S, R, and E.
-Note the separator between each is a ";" (semicolon), as ","
-(comma) already separates equates.
-The value of each field is a decimal number followed by a single letter
-designating the units ("s" for seconds, "m" for minutes).
-The fields have the following meanings:
-<P>
+There are three fields inside of the <code>T=</code> equate: S, R, and
+E.  Note the separator between each is a ";" (semicolon), as ","
+(comma) already separates equates.  The value of each field is a
+decimal number followed by a single letter designating the units ("s"
+for seconds, "m" for minutes).  The fields have the following
+meanings:
+<p>
 <TABLE cellspacing="1" cellpadding=4 border=1>
 <TR bgcolor="#dddddd" align=left valign=top>
 <TH>Flag</TH>   <TH align="center">Meaning</TH>
 </TR>
 <TR align="left" valign=top>
 <TD>C</TD>      <TD>Timeout for connecting to a filter.  If set to 0, the
-		system's <CODE>connect(2)</CODE> timeout will be used.
+		system's <CODE>connect()</CODE> timeout will be used.
 		Default: 5m</TD>
 </TR>
 <TR align="left" valign=top>
@@ -100,28 +106,27 @@ The fields have the following meanings:
 </TR>
 </TABLE>

-<P>
-The following sendmail.mc example specifies three filters.
-The first two rendezvous on Unix-domain sockets in the /var/run directory;
-the third uses an IP socket on port 999.
-<PRE>
+<p>
+The following sendmail.mc example specifies three filters.  The first
+two rendezvous on Unix-domain sockets in the /var/run directory; the
+third uses an IP socket on port 999.
+<pre>
 	INPUT_MAIL_FILTER(`filter1', `S=unix:/var/run/f1.sock, F=R')
 	INPUT_MAIL_FILTER(`filter2', `S=unix:/var/run/f2.sock, F=T, T=S:1s;R:1s;E:5m')
 	INPUT_MAIL_FILTER(`filter3', `S=inet:999@localhost, T=C:2m')

 	define(`confINPUT_MAIL_FILTERS', `filter2,filter1,filter3')
-<HR width="30%">
+<hr width="30%">
 	m4 ../m4/cf.m4 myconfig.mc &gt; myconfig.cf
-</PRE>
+</pre>
 By default, the filters would be run in the order declared,
 i.e. "filter1, filter2, filter3"; however, since
-<CODE>confINPUT_MAIL_FILTERS</CODE> is defined, the filters will be
-run "filter2, filter1, filter3".
-Also note that a filter can be defined
-without adding it to the input filter list by using
+<code>confINPUT_MAIL_FILTERS</code> is defined, the filters will be
+run "filter2, filter1, filter3".  Also note that a filter can be
+defined without adding it to the input filter list by using
 MAIL_FILTER() instead of INPUT_MAIL_FILTER().

-<P>
+<p>
 The above macros will result in the following lines being added to
 your .cf file:
 <PRE>
@@ -131,35 +136,34 @@ your .cf file:

        O InputMailFilters=filter2,filter1,filter3
 </PRE>
-<P>
-Finally, the sendmail macros accessible via
-<A HREF="smfi_getsymval.html">smfi_getsymval</A> can be configured by
+<p>
+Finally, the sendmail macros accessible via <a
+href="smfi_getsymval.html">smfi_getsymval</a> can be configured by
 defining the following m4 variables (or cf options):
-<TABLE cellspacing="1" cellpadding=4 border=1>
-<TR bgcolor="#dddddd" align=left valign=top>
-<TH align="center">In .mc file</TH>   <TH align="center">In .cf file</TH>
-<TH align="center">Default Value</TH>
-</TR>
-<TR><TD>confMILTER_MACROS_CONNECT</TD><TD>Milter.macros.connect</TD>
-<TD><CODE>j, _, {daemon_name}, {if_name}, {if_addr}</CODE></TD></TR>
-<TR><TD>confMILTER_MACROS_HELO</TD><TD>Milter.macros.helo</TD>
-<TD><CODE>{tls_version}, {cipher}, {cipher_bits}, {cert_subject},
-{cert_issuer}</CODE></TD></TR>
-<TR><TD>confMILTER_MACROS_ENVFROM</TD><TD>Milter.macros.envfrom</TD>
-<TD><CODE>i, {auth_type}, {auth_authen}, {auth_ssf}, {auth_author},
-{mail_mailer}, {mail_host}, {mail_addr}</CODE></TD></TR>
-<TR><TD>confMILTER_MACROS_ENVRCPT</TD><TD>Milter.macros.envrcpt</TD>
-<TD><CODE>{rcpt_mailer}, {rcpt_host}, {rcpt_addr}</CODE></TD></TR>
-</TABLE>
+<table cellspacing="1" cellpadding=4 border=1>
+<tr bgcolor="#dddddd" align=left valign=top>
+<th align="center">In .mc file</th>   <th align="center">In .cf file</TH>
+<th align="center">Default Value</th>
+</tr>
+<tr><td>confMILTER_MACROS_CONNECT</td><td>Milter.macros.connect</td>
+<td><code>j, _, {daemon_name}, {if_name}, {if_addr}</code></td></tr>
+<tr><td>confMILTER_MACROS_HELO</td><td>Milter.macros.helo</td>
+<td><code>{tls_version}, {cipher}, {cipher_bits}, {cert_subject},
+{cert_issuer}</code></td></tr>
+<tr><td>confMILTER_MACROS_ENVFROM</td><td>Milter.macros.envfrom</td>
+<td><code>i, {auth_type}, {auth_authen}, {auth_ssf}, {auth_author},
+{mail_mailer}, {mail_host}, {mail_addr}</code></td></tr>
+<tr><td>confMILTER_MACROS_ENVRCPT</td><td>Milter.macros.envrcpt</td>
+<td><code>{rcpt_mailer}, {rcpt_host}, {rcpt_addr}</code></td></tr>
+</table>
 For information about available macros and their meanings, please
 consult the sendmail documentation.
-<HR size="1">
-<FONT size="-1">
-Copyright (c) 2000-2003, 2006 Sendmail, Inc. and its suppliers.
+<hr size="1">
+<font size="-1">
+Copyright (c) 2000-2003 Sendmail, Inc. and its suppliers.
 All rights reserved.
-<BR>
+<br>
 By using this file, you agree to the terms and conditions set
 forth in the LICENSE.
-</FONT>
-</BODY>
-</HTML>
+</font>
+</body> </html>
@@ -1,18 +1,18 @@
-<HTML>
-<HEAD><TITLE>Other Resources</TITLE>
-</HEAD>
-<BODY>
+<html>
+<head><title>Other Resources</title>
+</head>
+<body>
 <!--
-$Id: other.html,v 1.6 2006/08/08 20:55:57 ca Exp $
+$Id: other.html,v 1.5 2003/03/05 19:57:54 ca Exp $
 -->
 FAQ?  Mailing list?  More sample filters?
-<HR size="1">
-<FONT size="-1">
+<hr size="1">
+<font size="-1">
 Copyright (c) 2000, 2003 Sendmail, Inc. and its suppliers.
 All rights reserved.
-<BR>
+<br>
 By using this file, you agree to the terms and conditions set
 forth in the LICENSE.
-</FONT>
-</BODY>
-</HTML>
+</font>
+</body>
+</html>
@@ -1,215 +1,194 @@
-<HTML>
-<HEAD>
-<TITLE>Technical Overview</TITLE>
-</HEAD>
-<BODY>
+<html>
+<head>
+<title>Technical Overview</title>
+</head>
+<body>
 <!--
-$Id: overview.html,v 1.19 2006/12/21 18:23:47 ca Exp $
+$Id: overview.html,v 1.14 2003/03/05 19:57:54 ca Exp $
 -->

-<H1>Technical Overview</H1>
+<h1>Technical Overview</h1>

-<H2>Contents</H2>
+<h2>Contents</h2>

-<UL>
-    <LI><A HREF="#Initialization">Initialization</A>
-    <LI><A HREF="#ControlFlow">Control Flow</A>
-    <LI><A HREF="#Multithreading">Multithreading</A>
-    <LI><A HREF="#ResourceManagement">Resource Management</A>
-    <LI><A HREF="#SignalHandling">Signal Handling</A>
-</UL>
+<ul>
+    <li>Initialization
+    <li>Control flow
+    <li>Multithreading
+    <li>Resource Management
+    <li>Signal Handling
+</ul>

-<H2><A NAME="Initialization">Initialization</A></H2>
+<h2>Initialization</h2>

-In addition to its own initialization,
-libmilter expects a filter to initialize several parameters
-before calling <A HREF="smfi_main.html">smfi_main</A>:
-<UL>
-    <LI>The callbacks the filter wishes to be called, and the types of
-    message modification it intends to perform (required, see
-    <A HREF="smfi_register.html">smfi_register</A>).
+In addition to its own initialization, libmilter expects a filter to initialize several parameters before calling <a href="smfi_main.html">smfi_main</a>:
+<ul>
+    <li>The callbacks the filter wishes to be called, and the types of
+    message modification it intends to perform (required, see <a
+    href="smfi_register.html">smfi_register</a>).

-    <LI>The socket address to be used when communicating with the MTA
-    (required, see <A HREF="smfi_setconn.html">smfi_setconn</A>).
+    <li>The socket address to be used when communicating with the MTA
+    (required, see <a href="smfi_setconn.html">smfi_setconn</a>).

-    <LI>The number of seconds to wait for MTA connections before
-    timing out (optional, see
-    <A HREF="smfi_settimeout.html">smfi_settimeout</A>).
-</UL>
-<P>
-If the filter fails to initialize libmilter,
-or if one or more of the parameters it has passed are invalid,
-a subsequent call to smfi_main will fail.
+    <li>The number of seconds to wait for MTA connections before
+    timing out (optional, see <a
+    href="smfi_settimeout.html">smfi_settimeout</a>).
+</ul>
+<p>
+If the filter fails to initialize libmilter, or if one or more of the
+parameters it has passed are invalid, a subsequent call to smfi_main
+will fail.

-<H2><A NAME="ControlFlow">Control Flow</A></H2>
+<h2>Control flow</h2>

-<P>
+<p>
 The following pseudocode describes the filtering process from the
-perspective of a set of <CODE>N</CODE> MTA's,
-each corresponding to a connection.
-Callbacks are shown beside the processing stages in which they are invoked;
-if no callbacks are defined for a particular stage,
-that stage may be bypassed.
-Though it is not shown,
-processing may be aborted at any time during a message,
-in which case the
-<A HREF="xxfi_abort.html">xxfi_abort</A> callback is invoked and control
-returns to <CODE>MESSAGE</CODE>.
-<P>
-<PRE>
+perspective of a set of <code>N</code> MTA's, each corresponding to a
+connection.  Callbacks are shown beside the processing stages in which
+they are invoked; if no callbacks are defined for a particular stage,
+that stage may be bypassed.  Though it is not shown, processing may be
+aborted at any time during a message, in which case the <a
+href="xxfi_abort.html">xxfi_abort</a> callback is invoked and control
+returns to <code>MESSAGE</code>.
+<p>
+<pre>
 For each of N connections
 {
 	For each filter
-		process connection/helo (<A HREF="xxfi_connect.html">xxfi_connect</A>, <A HREF="xxfi_helo.html">xxfi_helo</A>)
+		process connection/helo (<a href="xxfi_connect.html">xxfi_connect</a>, <a href="xxfi_helo.html">xxfi_helo</a>)
 MESSAGE:For each message in this connection (sequentially)
 	{
 		For each filter
-			process sender (<A HREF="xxfi_envfrom.html">xxfi_envfrom</A>)
+			process sender (<a href="xxfi_envfrom.html">xxfi_envfrom</a>)
 		For each recipient
 		{
 			For each filter
-				process recipient (<A HREF="xxfi_envrcpt.html">xxfi_envrcpt</A>)
+				process recipient (<a href="xxfi_envrcpt.html">xxfi_envrcpt</a>)
 		}
 		For each filter
 		{
-			process DATA (<A HREF="xxfi_data.html">xxfi_data</A>)
 			For each header
-				process header (<A HREF="xxfi_header.html">xxfi_header</A>)
-			process end of headers (<A HREF="xxfi_eoh.html">xxfi_eoh</A>)
+				process header (<a href="xxfi_header.html">xxfi_header</a>)
+			process end of headers (<a href="xxfi_eoh.html">xxfi_eoh</a>)
 			For each body block
-				process this body block (<A HREF="xxfi_body.html">xxfi_body</A>)
-			process end of message (<A HREF="xxfi_eom.html">xxfi_eom</A>)
+				process this body block (<a href="xxfi_body.html">xxfi_body</a>)
+			process end of message (<a href="xxfi_eom.html">xxfi_eom</a>)
 		}
 	}
 	For each filter
-		process end of connection (<A HREF="xxfi_close.html">xxfi_close</A>)
+		process end of connection (<a href="xxfi_close.html">xxfi_close</a>)
 }
-</PRE>
+</pre>

 <P>Note: Filters are contacted in order defined in config file.</P>

 <P>
 To write a filter, a vendor supplies callbacks to process relevant
-parts of a message transaction.
-The library then controls all sequencing, threading,
-and protocol exchange with the MTA.
-<A HREF="#figure-3">Figure 3</A> outlines control flow for a filter
+parts of a message transaction.  The library then controls all
+sequencing, threading, and protocol exchange with the MTA.  <a
+href="#figure-3">Figure 3</a> outlines control flow for a filter
 process, showing where different callbacks are invoked.
-</P>
-
-<DIV ALIGN="center"><A NAME="figure-3"></A>
-<TABLE border=1 cellspacing=0 cellpadding=2 width="70%">
-<TR bgcolor="#dddddd"><TH>SMTP Commands</TH><TH>Milter Callbacks</TH></TR>
-<TR><TD>(open SMTP connection)</TD><TD>xxfi_connect</TD></TR>
-<TR><TD>HELO ...</TD><TD>xxfi_helo</TD></TR>
-<TR><TD>MAIL From: ...</TD><TD>xxfi_envfrom</TD></TR>
-<TR><TD>RCPT To: ...</TD><TD>xxfi_envrcpt</TD></TR>
-<TR><TD>[more RCPTs]</TD><TD>[xxfi_envrcpt]</TD></TR>
-<TR><TD>DATA</TD><TD>xxfi_data</TD></TR>
-<TR><TD>Header: ...</TD><TD>xxfi_header</TD></TR>
-<TR><TD>[more headers]</TD><TD>[xxfi_header]</TD></TR>
-<TR><TD>&nbsp;</TD><TD>xxfi_eoh</TD></TR>
-<TR><TD>body... </TD><TD>xxfi_body</TD></TR>
-<TR><TD>[more body...]</TD><TD>[xxfi_body]</TD></TR>
-<TR><TD>.</TD><TD>xxfi_eom</TD></TR>
-<TR><TD>QUIT</TD><TD>xxfi_close</TD></TR>
-<TR><TD>(close SMTP connection)</TD><TD>&nbsp;</TD></TR>
-</TABLE>
-<B>Figure 3: Milter callbacks related to an SMTP transaction.</B>
-</DIV>
-
-<P>
+</p>
+<div align="center"><a name="figure-3"></a>
+<table border=1 cellspacing=0 cellpadding=2 width="70%">
+<tr bgcolor="#dddddd"><th>SMTP Commands</th><th>Milter Callbacks</th></tr>
+<tr><td>(open SMTP connection)</td><td>xxfi_connect</td></tr>
+<tr><td>HELO ...</td><td>xxfi_helo</td></tr>
+<tr><td>MAIL From: ...</td><td>xxfi_envfrom</td></tr>
+<tr><td>RCPT To: ...</td><td>xxfi_envrcpt</td></tr>
+<tr><td>[more RCPTs]</td><td>[xxfi_envrcpt]</td></tr>
+<tr><td>DATA</td><td>&nbsp;</td></tr>
+<tr><td>Header: ...</td><td>xxfi_header</td></tr>
+<tr><td>[more headers]</td><td>[xxfi_header]</td></tr>
+<tr><td>&nbsp;</td><td>xxfi_eoh</td></tr>
+<tr><td>body... </td><td>xxfi_body</td></tr>
+<tr><td>[more body...]</td><td>[xxfi_body]</td></tr>
+<tr><td>.</td><td>xxfi_eom</td></tr>
+<tr><td>QUIT</td><td>xxfi_close</td></tr>
+<tr><td>(close SMTP connection)</td><td>&nbsp;</td></tr>
+</table>
+<b>Figure 3: Milter callbacks related to an SMTP transaction.</b>
+</div>
+<p>
 Note that although only a single message is shown above, multiple
-messages may be sent in a single connection.
-Note also that a message or connection may be aborted by
-either the remote host or the MTA
-at any point during the SMTP transaction.
-f this occurs during a message (between the MAIL command and the final "."),
-the filter's
-<A HREF="xxfi_abort.html">xxfi_abort</A> routine will be called.
-<A HREF="xxfi_close.html">xxfi_close</A> is called any time the
+messages may be sent in a single connection.  Note also that a message
+and/or connection may be aborted by either the remote host or the MTA
+at any point during the SMTP transaction.  If this occurs during a
+message (between the MAIL command and the final "."), the filter's <a
+href="xxfi_abort.html">xxfi_abort</a> routine will be called.  <a
+href="xxfi_close.html">xxfi_close</a> is called any time the
 connection closes.

-<H2><A NAME="Multithreading">Multithreading</A></H2>
+<h2>Multithreading</h2>

-<P>
+<p>
 A single filter process may handle any number of connections
-simultaneously.
-All filtering callbacks must therefore be reentrant,
+simultaneously.  All filtering callbacks must therefore be reentrant,
 and use some appropriate external synchronization methods to access
-global data.
-Furthermore, since there is not a one-to-one correspondence
-between threads and connections
-(N connections mapped onto M threads, M &lt;= N),
-connection-specific data must be accessed
-through the handles provided by the Milter library.
-The programmer cannot rely on library-supplied thread-specific data blocks
-(e.g., <CODE>pthread_getspecific(3)</CODE>) to store connection-specific data.
-See the API documentation for
-<A HREF="smfi_setpriv.html">smfi_setpriv</A> and
-<A HREF="smfi_getpriv.html">smfi_getpriv</A> for details.
+global data. Furthermore, since there is not a one-to-one
+correspondence between threads and connections (N connections mapped
+onto M threads, M &lt;= N), connection-specific data must be accessed
+through the handles provided by the Milter library.  The programmer
+cannot rely on library-supplied thread-specific data blocks
+(e.g. pthread_getspecific()) to store connection-specific data.  See
+the API documentation for <a
+href="smfi_setpriv.html">smfi_setpriv</a> and <a
+href="smfi_getpriv.html">smfi_getpriv</a> for details.

-<H2><A NAME="ResourceManagement">Resource Management</A></H2>
+<h2>Resource management</h2>

-Since filters are likely to be long-lived,
-and to handle many connections,
-proper deallocation of per-connection resources is important.
-The lifetime of a connection is bracketed by calls to the
-callbacks <A HREF="xxfi_connect.html">xxfi_connect</A> and
-<A HREF="xxfi_close.html">xxfi_close</A>.
-Therefore connection-specific
-resources (accessed via <A HREF="smfi_getpriv.html">smfi_getpriv</A>
-and <A HREF="smfi_setpriv.html">smfi_setpriv</A>) may be allocated in
-<A HREF="xxfi_connect.html">xxfi_connect</A>,
-and should be freed in
-<A HREF="xxfi_close.html">xxfi_close</A>.
-For further information see
-the <A HREF="api.html#conn-msg">discussion</A> of message- versus
-connection-oriented routines.
-In particular,
-note that there is only one connection-specific data pointer per connection.
-<P>
+Since filters are likely to be long-lived, and to handle many
+connections, proper deallocation of per-connection resources is
+important.  The lifetime of a connection is bracketed by calls to the
+callbacks <a href="xxfi_connect.html">xxfi_connect</a> and <a
+href="xxfi_close.html">xxfi_close</a>.  Therefore connection-specific
+resources (accessed via <a href="smfi_getpriv.html">smfi_getpriv</a>
+and <a href="smfi_setpriv.html">smfi_setpriv</a>) may be allocated in
+<a href="xxfi_connect.html">xxfi_connect</a>, and should be freed in
+<a href="xxfi_close.html">xxfi_close</a>.  For further information see
+the <a href="api.html#conn-msg">discussion</a> of message- versus
+connection-oriented routines.  In particular, note that there is only
+one connection-specific data pointer per connection.
+<p>

-Each message is bracketed by calls to
-<A HREF="xxfi_envfrom.html">xxfi_envfrom</A> and
-<A HREF="xxfi_eom.html">xxfi_eom</A> (or
-<A HREF="xxfi_abort.html">xxfi_abort</A>),
-implying that message-specific resources can be allocated
-and reclaimed in these routines.
-Since the messages in a connection are processed sequentially by each filter,
+Each message is bracketed by calls to <a
+href="xxfi_envfrom.html">xxfi_envfrom</a> and <a
+href="xxfi_eom.html">xxfi_eom</a> (or <a
+href="xxfi_abort.html">xxfi_abort</a>), implying that message-specific
+resources can be allocated and reclaimed in these routines.  Since the
+messages in a connection are processed sequentially by each filter,
 there will be only one active message associated with a given
-connection and filter (and connection-private data block).
-These resources must still be accessed through
-<A HREF="smfi_getpriv.html">smfi_getpriv</A> and
-<A HREF="smfi_setpriv.html">smfi_setpriv</A>,
-and must be reclaimed in
-<A HREF="xxfi_abort.html">xxfi_abort</A>.
+connection and filter (and connection-private data block).  These
+resources must still be accessed through <a
+href="smfi_getpriv.html">smfi_getpriv</a> and <a
+href="smfi_setpriv.html">smfi_setpriv</a>, and must be reclaimed
+in <a href="xxfi_abort.html">xxfi_abort</a>.

-<H2><A NAME="SignalHandling">Signal Handling</A></H2>
+<h2>Signal Handling</h2>

-libmilter takes care of signal handling,
-the filters are not influenced directly by signals.
+libmilter takes care of signal handling, the filters are
+not influenced directly by signals.
 There are basically two types of signal handlers:

-<OL>
-<LI><TT>Stop</TT>: no new connections from the MTA will be accepted,
+<ol>
+<li><TT>Stop</TT>: no new connections from the MTA will be accepted,
 but existing connections are allowed to continue.
-<LI><TT>Abort</TT>: all filters will be stopped as soon as the next
+<li><TT>Abort</TT>: all filters will be stopped as soon as the next
 communication with the MTA happens.
-</OL>
+</ol>

-Filters are not terminated asynchronously
-(except by signals that can't be caught).
+Filters are not terminated asynchronously (except by
+signals that can't be caught).
 In the case of <TT>Abort</TT> the
-<A HREF="xxfi_abort.html">xxfi_abort</A> callback is invoked.
+<a href="xxfi_abort.html">xxfi_abort</a> callback is invoked.

-<HR size="1">
-<FONT size="-1">
-Copyright (c) 2000, 2001, 2003, 2006 Sendmail, Inc. and its suppliers.
+<hr size="1">
+<font size="-1">
+Copyright (c) 2000, 2001, 2003 Sendmail, Inc. and its suppliers.
 All rights reserved.
-<BR>
+<br>
 By using this file, you agree to the terms and conditions set
 forth in the LICENSE.
-</FONT>
-</BODY>
-</HTML>
+</font>
+</body>
+</html>
@@ -1,26 +1,26 @@
-<HTML>
-<HEAD><TITLE>A Sample Filter</TITLE></HEAD>
-<BODY>
+<html>
+<head><title>A Sample Filter</title></head>
+<body>
 <!--
-$Id: sample.html,v 1.22 2006/10/09 23:14:51 ca Exp $
+$Id: sample.html,v 1.18 2004/02/27 00:49:28 msk Exp $
 -->
-<H1>A Sample Filter</H1>
+<h1>A Sample Filter</h1>

 The following sample logs each message to a separate temporary file,
-adds a recipient given with the -a flag,
-and rejects a disallowed recipient address given with the -r flag.
-It recognizes the following options:
-<P>
-<CENTER>
-<TABLE border="1" cellpadding=2 cellspacing=1>
-<TR><TD><CODE>-p port</CODE></TD><TD>The port through which the MTA will connect to the filter.</TD></TR>
-<TR><TD><CODE>-t sec</CODE></TD><TD>The timeout value.</TD></TR>
-<TR><TD><CODE>-r addr</CODE></TD><TD>A recipient to reject.</TD></TR>
-<TR><TD><CODE>-a addr</CODE></TD><TD>A recipient to add.</TD></TR>
-</TABLE>
-</CENTER>
-<HR>
-<PRE>
+adds a recipient given with the -a flag, and rejects a disallowed
+recipient address given with the -r flag.  It recognizes the following
+options:
+<p>
+<center>
+<table border="1" cellpadding=2 cellspacing=1>
+<tr><td><code>-p port</code></td><td>The port through which the MTA will connect to the filter.</td></tr>
+<tr><td><code>-t sec</code></td><td>The timeout value.</td></tr>
+<tr><td><code>-r addr</code></td><td>A recipient to reject.</td></tr>
+<tr><td><code>-a addr</code></td><td>A recipient to add.</td></tr>
+</table>
+</center>
+<hr>
+<pre>
 #include &lt;sys/types.h&gt;
 #include &lt;sys/stat.h&gt;
 #include &lt;errno.h&gt;
@@ -47,7 +47,7 @@ struct mlfiPriv
 	FILE	*mlfi_fp;
 };

-#define MLFIPRIV	((struct mlfiPriv *) <A href="smfi_getpriv.html">smfi_getpriv</A>(ctx))
+#define MLFIPRIV	((struct mlfiPriv *) <a href="smfi_getpriv.html">smfi_getpriv</a>(ctx))

 extern sfsistat		mlfi_cleanup(SMFICTX *, bool);

@@ -56,7 +56,7 @@ char *add = NULL;
 char *reject = NULL;

 sfsistat
-<A href="xxfi_connect.html">mlfi_connect</A>(ctx, hostname, hostaddr)
+<a href="xxfi_connect.html">mlfi_connect</a>(ctx, hostname, hostaddr)
 	 SMFICTX *ctx;
 	 char *hostname;
 	 _SOCK_ADDR *hostaddr;
@@ -74,9 +74,9 @@ sfsistat
 	memset(priv, '\0', sizeof *priv);

 	/* save the private data */
-	<A href="smfi_setpriv.html">smfi_setpriv</A>(ctx, priv);
+	<a href="smfi_setpriv.html">smfi_setpriv</a>(ctx, priv);

-	ident = <A href="smfi_getsymval.html">smfi_getsymval</A>(ctx, "_");
+	ident = <a href="smfi_getsymval.html">smfi_getsymval</a>(ctx, "_");
 	if (ident == NULL)
 		ident = "???";
 	if ((priv-&gt;mlfi_connectfrom = strdup(ident)) == NULL)
@@ -90,7 +90,7 @@ sfsistat
 }

 sfsistat
-<A href="xxfi_helo.html">mlfi_helo</A>(ctx, helohost)
+<a href="xxfi_helo.html">mlfi_helo</a>(ctx, helohost)
 	 SMFICTX *ctx;
 	 char *helohost;
 {
@@ -99,7 +99,7 @@ sfsistat
 	char *buf;
 	struct mlfiPriv *priv = MLFIPRIV;

-	tls = <A href="smfi_getsymval.html">smfi_getsymval</A>(ctx, "{tls_version}");
+	tls = <a href="smfi_getsymval.html">smfi_getsymval</a>(ctx, "{tls_version}");
 	if (tls == NULL)
 		tls = "No TLS";
 	if (helohost == NULL)
@@ -120,14 +120,14 @@ sfsistat
 }

 sfsistat
-<A href="xxfi_envfrom.html">mlfi_envfrom</A>(ctx, argv)
+<a href="xxfi_envfrom.html">mlfi_envfrom</a>(ctx, argv)
 	 SMFICTX *ctx;
 	 char **argv;
 {
 	int fd = -1;
 	int argc = 0;
 	struct mlfiPriv *priv = MLFIPRIV;
-	char *mailaddr = <A href="smfi_getsymval.html">smfi_getsymval</A>(ctx, "{mail_addr}");
+	char *mailaddr = <a href="smfi_getsymval.html">smfi_getsymval</a>(ctx, "{mail_addr}");

 	/* open a file to store this message */
 	if ((priv-&gt;mlfi_fname = strdup("/tmp/msg.XXXXXX")) == NULL)
@@ -174,12 +174,12 @@ sfsistat
 }

 sfsistat
-<A href="xxfi_envrcpt.html">mlfi_envrcpt</A>(ctx, argv)
+<a href="xxfi_envrcpt.html">mlfi_envrcpt</a>(ctx, argv)
 	 SMFICTX *ctx;
 	 char **argv;
 {
 	struct mlfiPriv *priv = MLFIPRIV;
-	char *rcptaddr = <A href="smfi_getsymval.html">smfi_getsymval</A>(ctx, "{rcpt_addr}");
+	char *rcptaddr = <a href="smfi_getsymval.html">smfi_getsymval</a>(ctx, "{rcpt_addr}");
 	int argc = 0;

 	/* count the arguments */
@@ -211,7 +211,7 @@ sfsistat
 }

 sfsistat
-<A href="xxfi_header.html">mlfi_header</A>(ctx, headerf, headerv)
+<a href="xxfi_header.html">mlfi_header</a>(ctx, headerf, headerv)
 	 SMFICTX *ctx;
 	 char *headerf;
 	 unsigned char *headerv;
@@ -228,7 +228,7 @@ sfsistat
 }

 sfsistat
-<A href="xxfi_eoh.html">mlfi_eoh</A>(ctx)
+<a href="xxfi_eoh.html">mlfi_eoh</a>(ctx)
 	 SMFICTX *ctx;
 {
 	/* output the blank line between the header and the body */
@@ -243,7 +243,7 @@ sfsistat
 }

 sfsistat
-<A href="xxfi_body.html">mlfi_body</A>(ctx, bodyp, bodylen)
+<a href="xxfi_body.html">mlfi_body</a>(ctx, bodyp, bodylen)
 	 SMFICTX *ctx;
 	 unsigned char *bodyp;
 	 size_t bodylen;
@@ -265,19 +265,19 @@ sfsistat
 }

 sfsistat
-<A href="xxfi_eom.html">mlfi_eom</A>(ctx)
+<a href="xxfi_eom.html">mlfi_eom</a>(ctx)
 	 SMFICTX *ctx;
 {
 	bool ok = TRUE;

 	/* change recipients, if requested */
 	if (add != NULL)
-		ok = (<A href="smfi_addrcpt.html">smfi_addrcpt</A>(ctx, add) == MI_SUCCESS);
+		ok = (<a href="smfi_addrcpt.html">smfi_addrcpt</a>(ctx, add) == MI_SUCCESS);
 	return mlfi_cleanup(ctx, ok);
 }

 sfsistat
-<A href="xxfi_abort.html">mlfi_abort</A>(ctx)
+<a href="xxfi_abort.html">mlfi_abort</a>(ctx)
 	 SMFICTX *ctx;
 {
 	return mlfi_cleanup(ctx, FALSE);
@@ -317,7 +317,7 @@ mlfi_cleanup(ctx, ok)
 		else
 			p++;
 		snprintf(hbuf, sizeof hbuf, "%s@%s", p, host);
-		if (<A href="smfi_addheader.html">smfi_addheader</A>(ctx, "X-Archived", hbuf) != MI_SUCCESS)
+		if (<a href="smfi_addheader.html">smfi_addheader</a>(ctx, "X-Archived", hbuf) != MI_SUCCESS)
 		{
 			/* failed; we have to wait until later */
 			fprintf(stderr,
@@ -346,7 +346,7 @@ mlfi_cleanup(ctx, ok)
 }

 sfsistat
-<A href="xxfi_close.html">mlfi_close</A>(ctx)
+<a href="xxfi_close.html">mlfi_close</a>(ctx)
 	 SMFICTX *ctx;
 {
 	struct mlfiPriv *priv = MLFIPRIV;
@@ -358,59 +358,26 @@ sfsistat
 	if (priv-&gt;mlfi_helofrom != NULL)
 		free(priv-&gt;mlfi_helofrom);
 	free(priv);
-	<A href="smfi_setpriv.html">smfi_setpriv</A>(ctx, NULL);
+	<a href="smfi_setpriv.html">smfi_setpriv</a>(ctx, NULL);
 	return SMFIS_CONTINUE;
 }

-sfsistat
-<A href="xxfi_unknown.html">mlfi_unknown</A>(ctx, cmd)
-	SMFICTX *ctx;
-	char *cmd;
-{
-	return SMFIS_CONTINUE;
-}
-
-sfsistat
-<A href="xxfi_data.html">mlfi_data</A>(ctx)
-	SMFICTX *ctx;
-{
-	return SMFIS_CONTINUE;
-}
-
-sfsistat
-<A href="xxfi_negotiate.html">mlfi_negotiate</A>(ctx, f0, f1, f2, f3, pf0, pf1, pf2, pf3)
-	SMFICTX *ctx;
-	unsigned long f0;
-	unsigned long f1;
-	unsigned long f2;
-	unsigned long f3;
-	unsigned long *pf0;
-	unsigned long *pf1;
-	unsigned long *pf2;
-	unsigned long *pf3;
-{
-	return SMFIS_ALL_OPTS;
-}
-
 struct smfiDesc smfilter =
 {
 	"SampleFilter",	/* filter name */
 	SMFI_VERSION,	/* version code -- do not change */
 	SMFIF_ADDHDRS|SMFIF_ADDRCPT,
 			/* flags */
-	<A href="xxfi_connect.html">mlfi_connect</A>,	/* connection info filter */
-	<A href="xxfi_helo.html">mlfi_helo</A>,	/* SMTP HELO command filter */
-	<A href="xxfi_envfrom.html">mlfi_envfrom</A>,	/* envelope sender filter */
-	<A href="xxfi_envrcpt.html">mlfi_envrcpt</A>,	/* envelope recipient filter */
-	<A href="xxfi_header.html">mlfi_header</A>,	/* header filter */
-	<A href="xxfi_eoh.html">mlfi_eoh</A>,	/* end of header */
-	<A href="xxfi_body.html">mlfi_body</A>,	/* body block filter */
-	<A href="xxfi_eom.html">mlfi_eom</A>,	/* end of message */
-	<A href="xxfi_abort.html">mlfi_abort</A>,	/* message aborted */
-	<A href="xxfi_close.html">mlfi_close</A>,	/* connection cleanup */
-	<A href="xxfi_unknown.html">mlfi_unknown</A>,	/* unknown SMTP commands */
-	<A href="xxfi_data.html">mlfi_data</A>,	/* DATA command */
-	<A href="xxfi_negotiate.html">mlfi_negotiate</A>	/* Once, at the start of each SMTP connection */
+	<a href="xxfi_connect.html">mlfi_connect</a>,	/* connection info filter */
+	<a href="xxfi_helo.html">mlfi_helo</a>,	/* SMTP HELO command filter */
+	<a href="xxfi_envfrom.html">mlfi_envfrom</a>,	/* envelope sender filter */
+	<a href="xxfi_envrcpt.html">mlfi_envrcpt</a>,	/* envelope recipient filter */
+	<a href="xxfi_header.html">mlfi_header</a>,	/* header filter */
+	<a href="xxfi_eoh.html">mlfi_eoh</a>,	/* end of header */
+	<a href="xxfi_body.html">mlfi_body</a>,	/* body block filter */
+	<a href="xxfi_eom.html">mlfi_eom</a>,	/* end of message */
+	<a href="xxfi_abort.html">mlfi_abort</a>,	/* message aborted */
+	<a href="xxfi_close.html">mlfi_close</a>,	/* connection cleanup */
 };

 static void
@@ -444,7 +411,7 @@ main(argc, argv)
 					       optarg);
 				exit(EX_USAGE);
 			}
-			if (<A href="smfi_setconn.html">smfi_setconn</A>(optarg) == MI_FAILURE)
+			if (<a href="smfi_setconn.html">smfi_setconn</a>(optarg) == MI_FAILURE)
 			{
 				(void) fprintf(stderr,
 					       "smfi_setconn failed\n");
@@ -471,7 +438,7 @@ main(argc, argv)
 					       optarg);
 				exit(EX_USAGE);
 			}
-			if (<A href="smfi_settimeout.html">smfi_settimeout</A>(atoi(optarg)) == MI_FAILURE)
+			if (<a href="smfi_settimeout.html">smfi_settimeout</a>(atoi(optarg)) == MI_FAILURE)
 			{
 				(void) fprintf(stderr,
 					       "smfi_settimeout failed\n");
@@ -514,24 +481,24 @@ main(argc, argv)
 		usage(argv[0]);
 		exit(EX_USAGE);
 	}
-	if (<A href="smfi_register.html">smfi_register</A>(smfilter) == MI_FAILURE)
+	if (<a href="smfi_register.html">smfi_register</a>(smfilter) == MI_FAILURE)
 	{
 		fprintf(stderr, "smfi_register failed\n");
 		exit(EX_UNAVAILABLE);
 	}
-	return <A href="smfi_main.html">smfi_main</A>();
+	return <a href="smfi_main.html">smfi_main</a>();
 }

 /* eof */

-</PRE>
-<HR size="1">
-<FONT size="-1">
-Copyright (c) 2000-2004, 2006 Sendmail, Inc. and its suppliers.
+</pre>
+<hr size="1">
+<font size="-1">
+Copyright (c) 2000-2004 Sendmail, Inc. and its suppliers.
 All rights reserved.
-<BR>
+<br>
 By using this file, you agree to the terms and conditions set
 forth in the LICENSE.
-</FONT>
-</BODY>
-</HTML>
+</font>
+</body>
+</html>
Author	SHA1	Message	Date
Ken Smith	a84f9c8c4d	Ready to do the tagging for 4.11-RELEASE. Approved by: re (implicit)	2005-01-21 13:12:41 +00:00
Hiroki Sato	672c020ccb	Remove unnecessary parts for the release. Approved by: re (implicitly)	2005-01-21 11:20:40 +00:00
Hiroki Sato	1ad8babf96	New release notes: XFree86 4.4.0. Update release notes: - Move pbio(4) to the platform specific section. - more port randomization related sysctl: net.inet.ip.portrange.randomcps net.inet.ip.portrange.randomtime - net.inet.tcp.insecure_rst=1 is required for RFC 793. Approved by: re (implicitly)	2005-01-21 11:16:10 +00:00
Hiroki Sato	53887285f9	- Use &os;. - Remove empty sections. Approved by: re (implicitly)	2005-01-21 06:46:33 +00:00
Hiroki Sato	6600f49b59	New release notes: CVS 1.11.17. Approved by: re (implicitly)	2005-01-21 06:43:18 +00:00
Hiroki Sato	a09a226a43	New release notes: pbio(4) added, axe(4) added, bge(4) BCM5750/BCM5751 support, kernel panic when net.inet.ip.rtexpire=0 fixed, ipnat(8) non-TCP/UDP packets redirect rules support, trm(4) update, fwcontrol(8) -m option, $inetd_flags now includes "-C 60", libc eui64(3) functions support, ngctl(8) dot command, pax(1) bugfixes, and whois(1) improvements. Approved by: re (implicitly)	2005-01-21 06:34:29 +00:00
Hiroki Sato	3945a8c709	New release notes: fixes of vm_object_*() and contigmalloc(), em(4) 82541ER and 82546GB support, ixgb(4) added, sk(4) jumbo frame handling fix, net.inet.tcp.insecure_rst sysctl, ips(4) added, mpt(4) FC929X support, and linux_base-8 used by default. Approved by: re (implicitly)	2005-01-21 05:37:58 +00:00
Paul Saab	1b82bcc329	MFC rev 1.57: Remove 6422, V100 and add the P600. Approved by: re (kensmith)	2005-01-21 05:28:00 +00:00
Hiroki Sato	cfe58f08a5	New release notes: Gnome 2.8.2 and KDE 3.3.2. Approved by: re (implicitly)	2005-01-21 04:51:09 +00:00
Hiroki Sato	cd7892f523	New release notes: SA-04:13, SA-04:14, SA-04:16, and SA-04:17. Approved by: re (implicitly)	2005-01-21 04:44:30 +00:00
Hiroki Sato	6ed973283d	Bump &release.manpath.netbsd; to 2.0. Approved by: re (implicitly)	2005-01-21 04:05:59 +00:00
Hiroki Sato	dea4a87bd1	- Bump the copyright year. - Simplify %foo; entities in the preamble. - Trim old information. Approved by: re (implicitly)	2005-01-21 02:52:24 +00:00
Hiroki Sato	99b361af69	Bump &release.*; for 4.11R. Approved by: re (implicitly)	2005-01-21 02:44:36 +00:00
Ken Smith	35391b0ab8	MFS revision 1.749.2.175 date: 2005/01/17 09:37:27; author: scottl; state: Exp; lines: +1 -0 Add tap(4) to LINT PR: kern/44260 Submitted by: Matthias Andree Approved by: re (scottl)	2005-01-19 18:24:17 +00:00
Ken Smith	7c378b035f	MFS of v1.55.2.10: MFC revision 1.105: date: 2002/09/07 04:59:49; author: peter; state: Exp; lines: +1 -0 Supposedly linux has added a 6th syscall arg register (%ebp). I am not 100% sure if this is enough, but it will not harm anything. This appears to fix some breakage with the emulation of linux's mmap2(). When that function became available recently the linux executables started using it which broke installing the emulators/linux_base-8 port. Pointer from: akiyama Approved by: re (scottl)	2005-01-19 18:13:40 +00:00
Christian Brueffer	84311d7439	MFC: rev. 1.10 - list the Hama USB RS-232 Serial Adapter as supported - bump .Dd Approved by: re (kensmith)	2005-01-18 19:11:11 +00:00
Ken Smith	89cf65c9b8	Almost ready for RC3 builds. Approved by: re (implicit)	2005-01-14 21:53:38 +00:00
Scott Long	ff056c2ab1	Merge the ips driver bits. Tags were slid on the files that were added to the RELENG_4 branch. This commit covers the files that existed and were merely changed. Approved by: re	2005-01-14 03:07:41 +00:00
Ken Smith	7207f98338	Regen from syscalls.master revision 1.30.2.8.8.1 Approved by: re (scottl)	2005-01-14 00:09:55 +00:00
Ken Smith	01ca612ace	MFS of some Linux emulation fixes. From the log message of the MFC: kensmith 2005-01-12 16:34:55 UTC FreeBSD src repository Modified files: (Branch: RELENG_4) lib/libc/gen errlst.c lib/libc/sys intro.2 sys/nfs nfs_subs.c sys/sys errno.h sys/i386/linux linux_dummy.c linux_machdep.c syscalls.master Log: This is a partial MFC of the current RELENG_5 Linux emulation, which became necessary due to the plans for using linux_base-8 for the 4.11 release. Among other things running "/compat/linux/bin/ls -l" dumped core because it tried to use completely non-existent system calls. We don't actually implement the system calls it's trying to use but we at least need to have something in place that returns an error code. Things being added: - wrapper for mmap2(2) from sys/compat/linux/linux_machdep.c v1.31 sys/compat/linux/linux_dummy.c v1.35 - add dummy entries for fadvise64(2) and xattr(2) family of syscalls from sys/compat/linux/linux_dummy.c v1.37 - add ENOATTR error code because that is what the xattr(2) family of syscalls returns, which in turn required tweaking the error code translation table in the NFS server code[1]. - add $FreeBSD$ token to lib/libc/gen/errlst.c so it passes pre-commit check script... [1] Noticed by rwatson. Requested by: nectar Reviewed by: nectar, sobomax, re@ Tested by: nectar, ceri Versions being MFS-ed: src/lib/libc/gen/errlst.c 1.2.2.1 src/lib/libc/sys/intro.2 1.21.2.8 and 1.21.2.9 src/sys/i386/linux/linux_dummy.c 1.21.2.9 src/sys/i386/linux/linux_machdep.c 1.6.2.6 src/sys/i386/linux/syscalls.master 1.30.2.9 src/sys/nfs/nfs_subs.c 1.90.2.4 src/sys/sys/errno.h 1.14.2.3 Approved by: re (scottl)	2005-01-14 00:07:56 +00:00
Ken Smith	56fa421a15	MFS revision 1.50.2.48 date: 2005/01/11 18:25:01; author: kensmith; state: Exp; lines: +1 -1 MFC of an off-by-one fix sos made to HEAD in v1.96 of ata-chipset.c and v1.50 of ata-lowlevel.c. From his log message: Log: Compensate for off by one bugs in disk firmware for 48BIT addressing cutover. Requested by: marck Glanced at by: sos Approved by: re (scottl)	2005-01-13 23:03:12 +00:00
Ken Smith	2e85ae4673	MFC v1.1.2.39: The package set configuration for 4.11-RELEASE. Approved by: re (scottl)	2005-01-13 22:54:59 +00:00
SUZUKI Shinsuke	3c5c01cc50	MFC: Rev. 1.71 fixed an unexpected addr/port matching failure in IPv6 SA management PR: kern/72393 Approved by: re (kensmith)	2005-01-13 22:47:18 +00:00
Eric Anholt	20a58379dd	MFS: Remove and recreate with correct permissions/owner three additional X socket directories. Approved by: re (kensmith)	2005-01-13 22:09:17 +00:00
Ian Dowse	c1fc798db7	MFC: 1.6; When searching for a suitable block of memory on the free list, skip blocks that are too big by a factor of two or greater. Approved by: re (kensmith)	2005-01-13 22:06:57 +00:00
cvs2svn	52101c3a7e	This commit was manufactured by cvs2svn to create branch 'RELENG_4_11'.	2005-01-13 01:01:11 +00:00
Alexey Zelkin	d372cbc1e8	MFC: rev 1.40, fix redraw of checklist box while specifiyng manual dialog size Approved by: re (kensmith)	2005-01-12 21:01:20 +00:00
Ceri Davies	bfe60c7f04	MFC r1.17: Add a usb category for USB PRs. Approved by: re (kensmith)	2005-01-12 20:07:19 +00:00
Maxime Henrion	f2466b8548	Merge if_fxp.c:1.221 from HEAD to RELENG_5: date: 2005/01/04 19:30:14; author: mux; state: Exp; lines: +1 -1 Allow fxp(4) cards with a revision id of 0 to use the 82503 serial interface as well. This is not an expected revision id per the datasheet, but unfortunately there are such cards out there with a 82557 chipset, and they want to use the 82503. PR: kern/75739 Reported by: Andre Albsmeier <[email protected]> Approved by: re (kensmith)	2005-01-12 13:29:03 +00:00
Christian Brueffer	4e2f30561f	MFC: rev. 1.17 - add new supported chips: 82541ER and 82546GB - change .Nd to look better (no need to mention FreeBSD there) - bump .Dd Approved by: re (kensmith)	2005-01-12 11:24:30 +00:00
Christian Brueffer	89ce5d04a2	MFC: rev. 1.30 - some SATA controllers were erroneously marked as SCSI, correct that - move those controllers into the right place - mention that the driver supports SATA - bump .Dd Approved by: re (kensmith)	2005-01-12 11:23:46 +00:00
Christian Brueffer	27476a4f5a	MFC: - add vendor names for the MegaRAID cards, since LSI aquired the AMI storage devision some time ago - bump .Dd Approved by: re (kensmith)	2005-01-12 11:23:15 +00:00
Ken Smith	f492c7a6d2	MFC v1.252.2.74 Sync list of ftp sites with current reality. Approved by: re (implicit)	2005-01-12 03:59:26 +00:00
Vinod Kashyap	5e90ebc723	Merged from RELENG_4, changes related to the 9.1.5.2 release of twa on the 3ware website. Reviewed by:re Approved by:re MFC after:4 days	2005-01-10 23:55:09 +00:00
Wilko Bulte	088d027cc7	MFC: Document slot specific location for base I/O board on AS600. Thanks to: Charles Smeijer for getting me my AS600. Approved by: re / kensmith (blanket)	2005-01-07 21:14:08 +00:00
Wilko Bulte	21face7b5d	MFC: Note that fdisk is not used on Alpha. Remove outdated info on install media. Submitted by: "William H. Magill" <[email protected]> Approved by: re / kensmith (blanket)	2005-01-07 19:49:27 +00:00
Julian Elischer	788b83c80f	MFC: ehci.c 1.5.4.13 Fix a bug where an aborted command was removed from the > queue but not from the hardware's cache of it, leading to the > hardware DMAing into "freed" memory buffers. (leading to crashes when > a usb ransaction was timed, but but eventually happenned) > > along with an associated change to ehcivar.h Approved by: re (ken)	2005-01-07 19:23:07 +00:00
Marius Strobl	4ff6474464	Merge from RELENG_4: 1.3.2.4 Fix a mis-merge in the MFC of rev. 1.64 in rev. 1.3.2.3; the following change wasn't included: - Set the CAM status to CAM_SCSI_STATUS_ERROR rather than CAM_REQ_CMP in case of a CHECK CONDITION. Approved by: re (kensmith)	2005-01-07 15:15:19 +00:00
Doug White	5aaac9b285	MF 1.19.2.13: Fix locking/better IFF_OACTIVE handling (by jmg). Correct detected RAM sizing for 88E8001 parts. Fix off-by-one in VPD data read. Correct handling of jumbo frames for Yukon based devices. Approved by: re Committed on behalf of: bz	2005-01-07 04:52:22 +00:00
Mike Silbersack	4cf393bc35	MFC revs 1.235 and 1.264; Improve the security of RST handling, and add a sysctl which can fall back to the old method. Approved by: re	2005-01-05 08:46:10 +00:00
Kirill Ponomarev	e3aa7b06bc	MFC: Remove trailing spaces. Approved by: re (kensmith)	2005-01-05 08:41:23 +00:00
Tony Ackerman	1aaf832ab0	Added device id support for Intel 82541ER and 82546GB dual port PCI Express adapter. Corrected a workaround that should only be applied to one adapter. Workaround was causing device hangs when incorrectly applied to other adapters. Approved by: re	2005-01-04 23:55:03 +00:00
Josef El-Rayes	494de3e294	MFC fixes to string modification code into RELENG_4_11. Approved by: re Discussed on: re, secteam Pointed out by: kensmith, cperciva Pointy hat: josef	2005-01-04 12:17:37 +00:00
Maxim Sobolev	d3da343a40	MFC: add support for FC929X and add missed mpt(4) manpage. Approved by: re	2005-01-03 16:39:20 +00:00
Kirill Ponomarev	7c2b2199f5	MFC: rev 1.24 date: 2004/12/30 13:09:34; author: krion; state: Exp; lines: +3 -1 Add LOG_NTP facility. Submitted by: Kurt Jaeger <pi at complx dot LF dot net> Approved by: ru MFC after: 3 days Approved by: re (kensmith)	2005-01-02 09:03:14 +00:00
Ken Smith	5cfc82abb3	Ready for RC2... Approved by: re (implicit)	2005-01-02 06:42:14 +00:00
Mike Silbersack	427cb6c8fd	MFC of port randomization rate-based disabling: in_pcb.c rev 1.157 in_pcb.h rev 1.79 ip_input.c rev 1.293 ip_var.h rev 1.93 Approved by: re	2005-01-02 05:03:16 +00:00
Maxim Sobolev	598282ec8f	Complete 2005 transition. Approved by: re	2005-01-01 23:24:04 +00:00
Ken Smith	ecab39b16c	MFC of rev 1.329 of vm_object.c: date: 2004/07/28 18:23:08; author: alc; state: Exp; lines: +2 -2 Correct a very old error in both vm_object_madvise() (originating in vm/vm_object.c revision 1.88) and vm_object_sync() (originating in vm/vm_map.c revision 1.36): When descending a chain of backing objects, both use the wrong object's backing offset. Consequently, both may operate on the wrong pages. Quoting Matt, "This could be responsible for all of the sporatic madvise oddness that has been reported over the years." Reviewed by: Matt Dillon Reviewed by: alc Helped by: DFly vm_map.c rev 1.31, vm_object.c rev 1.17 Approved by: re (scottl)	2005-01-01 19:54:00 +00:00
Julian Elischer	d53d301616	MFC a change from Dragonfly. contigmalloc was not respecting the fact that other processes may have a page marker as busy for IO but otherwise free. It just took it as free.. Approved by: re (ken)	2005-01-01 10:29:04 +00:00
Warner Losh	3637dc0593	MFC: 2005 Approved by: re@ (kensmith)	2004-12-31 19:16:33 +00:00
Ken Smith	16afe00491	MFC of revision 1.80.2.21, which was MFC of rev 1.103: date: 2004/12/22 04:45:49; author: kensmith; state: Exp; lines: +7 -0 MFC rev 1.103: date: 2004/11/03 18:26:06; author: kensmith; state: Exp; lines: +7 -0 Update the list of package names/descriptions. Approved by: re (scottl)	2004-12-30 21:39:35 +00:00
Christian Brueffer	00004d3d3e	MFC: rev. 1.7 Fix typos. Approved by: re (kensmith)	2004-12-30 02:55:16 +00:00
Christian Brueffer	616b9b4592	MFC: rev. 1.6 + 1.7 The ixgb(4) driver actually first appeared in 5.3 and the upcoming 4.11. Approved by: re (kensmith)	2004-12-29 21:45:17 +00:00
Maxime Henrion	a5689e9fc7	Merge if_fxp.c:1.220 from HEAD to RELENG_4_11: date: 2004/12/20 10:18:21; author: mux; state: Exp; lines: +2 -2 Only try to use the 82503 serial interface for the 82557 chipsets. The datasheet says it is only valid for such chipsets and shouldn't be used with others. This fixes some 82559 based cards which otherwise only work at 10Mbit. MFC after: 5 days Tested by: krion Approved by: re (kensmith)	2004-12-29 10:33:03 +00:00
Wilko Bulte	2ca8ad93ea	Add missing Alpha CPU models. Approved by: re (kensmith)	2004-12-27 18:50:59 +00:00
Wilko Bulte	b68959d6b2	em(4) is now available in the installation kernel. Approved by: re (kensmith)	2004-12-25 13:48:31 +00:00
Wilko Bulte	0ed4117fd6	replace wx(4) by em(4) now that em works OK on Alpha. Approved by: re (kensmith) / blanket	2004-12-24 22:48:59 +00:00
Wilko Bulte	7b24683892	wx is removed from GENERIC so it can go from dokern.sh as well. Approved by: re (kensmith) / blanket	2004-12-24 22:46:51 +00:00
Wilko Bulte	2da4750852	add em(4) as a module Approved by: re (kensmith) / blanket	2004-12-24 22:44:38 +00:00
Wilko Bulte	0e6870c21a	move em(4) to MI section Approved by: re (scottl)	2004-12-24 22:37:01 +00:00
Wilko Bulte	ef45c2bac3	move if_em from MD to MI Approved by: re (scottl)	2004-12-24 22:35:53 +00:00
Mike Silbersack	b4eab319b1	MFC rev 1.259; accept RSTs when our window is closed. Approved by: re	2004-12-23 22:08:20 +00:00
Yaroslav Tykhiy	007cd988ab	MFC: S_IS* macros; some well-known struct stat fields. Approved by: re (kensmith) Encouraged by: roam	2004-12-23 07:03:19 +00:00
Christian Brueffer	dc91dc3fc2	MFC: rev. 1.33 Nuke ports-picobsd, it was thrown out a while ago. Approved by: re (kensmith)	2004-12-22 19:48:42 +00:00
Ken Smith	1f06fd7254	MFC v 1.1.2.37 Adjustments for disc1 package set to make it fit as of 4.11RC1. Approved by: re (scottl)	2004-12-22 06:26:08 +00:00
Kirill Ponomarev	2d028e843b	MFC: rev 1.48 Introduce new variables FETCHINDEX, MASTER_SITE_INDEX and add description for MASTER_SITE_BACKUP. Approved by: re (kensmith)	2004-12-21 08:33:14 +00:00
Christian Brueffer	172993189c	MFC: rev. 1.11 Properly capitalize FireWire Approved by: re (kensmith)	2004-12-20 21:47:48 +00:00
Christian Brueffer	8cbb2bd53c	MFC: rev. 1.6 - remove nonexistant "device fwohci" - sort SYNOPSIS devices - capitalize Ethernet - bump .Dd Approved by: re (kensmith)	2004-12-20 21:47:09 +00:00
Christian Brueffer	9d72e45d98	MFC: rev. 1.4 Assorted markup, spelling, and grammar fixes. Approved by: re (kensmith)	2004-12-20 21:46:19 +00:00
Christian Brueffer	dae1a46598	MFC: rev. 1.5 Assorted markup, spelling, and grammar fixes. Approved by: re (kensmith)	2004-12-20 21:45:39 +00:00
Christian Brueffer	78582b1c5f	MFC: rev. 1.14 - 1.16 - Properly capitalize Gigabit Ethernet. - First update for the 5721/5750/5751 chips. Approved by: re (kensmith)	2004-12-20 20:07:19 +00:00
Paul Saab	ae4c32a4c1	MFC: 5721 Support Approved by: re	2004-12-20 18:58:15 +00:00
Boris Popov	ba478b5b5b	MFS: Initialize olen value passed to sysctl. Approved by: re	2004-12-19 15:24:22 +00:00
Christian Brueffer	797c627590	MFC: rev. 1.6 Remove clauses 3 and 4 of the license. Approved by: re (kensmith)	2004-12-19 10:37:14 +00:00
Ken Smith	25ed376446	MFC v1.2.2.26: Uncomment entries under the "not found in doc-common" section. Thanks to: jkoshy Requested by: ru Approved by: re (implicit)	2004-12-19 05:04:28 +00:00
cvs2svn	8d94620d78	This commit was manufactured by cvs2svn to create branch 'RELENG_4_11'.	2004-12-18 19:12:08 +00:00
Gleb Smirnoff	ecc9da252c	MFC 1.32: Note that send(2) is no longer applicable to divert(4) sockets. Approved by: re (kensmith)	2004-12-18 09:30:32 +00:00
Ken Smith	1ebd54dc13	Update tag used when doing a cvs update. Reminded by: ru Approved by: re (implicit)	2004-12-17 13:41:58 +00:00
Ken Smith	9a619c24fe	Add 4.11 to releases not found in doc-common. Requested by: ru Approved by: re (implicit)	2004-12-17 13:15:08 +00:00
Ken Smith	2700c9511d	Ready for RC1 builds. Approved by: re (implicit)	2004-12-17 06:49:43 +00:00
Ken Smith	8adeb5ea7b	Bump __FreeBSD_version for 4.11-RELEASE. Approved by: re (implicit)	2004-12-17 06:47:44 +00:00
Ken Smith	664e539c55	Adjust comment at the top to explicitly say FreeBSD-4.11. Approved by: re (implicit) Suggested by: cperciva	2004-12-17 06:37:50 +00:00
Ken Smith	fb40c863c0	Update tag to RELENG_4_11. Approved by: re (implicit)	2004-12-17 06:33:55 +00:00
cvs2svn	b0f916ae0c	This commit was manufactured by cvs2svn to create branch 'RELENG_4_11'.	2004-12-17 04:33:44 +00:00
cvs2svn	f75af3eaf5	This commit was manufactured by cvs2svn to create branch 'RELENG_4_11'.	2004-12-13 13:58:44 +00:00
cvs2svn	9f89468396	This commit was manufactured by cvs2svn to create branch 'RELENG_4_11'.	2004-12-06 14:39:45 +00:00
cvs2svn	31d8b16f9b	This commit was manufactured by cvs2svn to create branch 'RELENG_4_11'.	2004-11-16 20:51:46 +00:00
cvs2svn	5d5c995d23	This commit was manufactured by cvs2svn to create branch 'RELENG_4_11'.	2003-07-19 16:52:17 +00:00
cvs2svn	ebdd70512c	This commit was manufactured by cvs2svn to create branch 'RELENG_4_11'.	2002-08-06 08:24:47 +00:00