This commit was manufactured by cvs2svn to create tag

'RELENG_2_2_0_RELEASE'.
This commit was manufactured by cvs2svn to create branch 'RELENG_2_2'.
2026-10-28 19:34:43 +01:00 · 1997-03-17 04:05:04 +00:00 · 1997-03-16 07:21:33 +00:00 · 1997-03-16 04:06:39 +00:00 · 1997-03-15 23:36:46 +00:00 · 1997-03-15 23:29:16 +00:00
4322 changed files with 520008 additions and 482394 deletions
@@ -1,11 +1,13 @@
 #
-#	$Id: Makefile,v 1.108 1996/10/25 14:22:50 bde Exp $
+#	$Id: Makefile,v 1.109.2.1 1996/11/28 21:43:35 phk Exp $
 #
 # Make command line options:
 #	-DCLOBBER will remove /usr/include
 #	-DMAKE_LOCAL to add ./local to the SUBDIR list
 #	-DMAKE_PORTS to add ./ports to the SUBDIR list
 #	-DMAKE_EBONES to build eBones (KerberosIV)
+#	-DALLLANG to build documentation for all languages
+#	  (where available -- see share/doc/Makefile)
 #
 #	-DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
 #	-DNOCLEAN do not clean at all
@@ -129,7 +131,7 @@ MK_FLAGS=	-DNOMAN -DNOPROFILE
 #
 world:
 	@echo "--------------------------------------------------------------"
-	@echo "make world started on `LC_TIME= date`"
+	@echo "make world started on `LC_TIME=C date`"
 	@echo "--------------------------------------------------------------"
 .if target(pre-world)
 	@echo "--------------------------------------------------------------"
@@ -222,7 +224,7 @@ world:
 .endif
 	@echo
 	@echo "--------------------------------------------------------------"
-	@echo "make world completed on `LC_TIME= date`"
+	@echo "make world completed on `LC_TIME=C date`"
 	@echo "--------------------------------------------------------------"

 #
@@ -0,0 +1,73 @@
+This is the top level of the FreeBSD source directory.  This file
+was last revised on: $Id$
+
+For copyright information, please see the file COPYRIGHT in this
+directory (additional copyright information also exists for some
+sources in this tree - please see the specific source directories for
+more information).
+
+The Makefile in this directory supports a number of targets for
+building components (or all) of the FreeBSD source tree, the most
+commonly used one being ``world'', which rebuilds and installs
+everything in the FreeBSD system from the source tree except the
+kernel.  Please see the top of the Makefile for more information on
+the standard build targets and compile-time flags.
+
+Building a kernel with config(1) is a somewhat more involved process,
+documentation for which can be found at:
+   http://www.freebsd.org/handbook/kernelconfig.html
+And in the config(1) man page.
+
+The sample kernel configuration files reside in the sys/i386/conf
+sub-directory (assuming that you've installed the kernel sources), the
+file named GENERIC being the one used to build your initial installation
+kernel.  The file LINT contains entries for all possible devices, not
+just those commonly used, and is meant more as a general reference
+than an actual kernel configuration file (a kernel built from it
+wouldn't even run).
+
+
+Source Roadmap:
+---------------
+bin		System/User commands.
+
+contrib		Packages contributed by 3rd parties.
+
+eBones		Kerberos package - NOT FOR EXPORT!
+
+etc		Template files for /etc
+
+games		Amusements.
+
+gnu		Various commands and libraries under the GNU Public License.
+		Please see gnu/COPYING* for more information.
+
+include		System include files.
+
+lib		System libraries.
+
+libexec		System daemons.
+
+lkm		Loadable Kernel Modules.
+
+release		Release building Makefile & associated tools.
+
+sbin		System commands.
+
+secure		DES and DES-related utilities - NOT FOR EXPORT!
+
+share		Shared resources.
+
+sys		Kernel sources.
+
+tools		Utilities for regression testing and miscellaneous tasks.
+
+usr.bin		User commands.
+
+usr.sbin	System administration commands.
+
+
+For information on synchronizing your source tree with one or more of
+the FreeBSD Project's development branches, please see:
+
+  http://www.freebsd.org/handbook/synching.html
@@ -1,7 +1,7 @@
 #	From: @(#)Makefile	8.1 (Berkeley) 5/31/93
-#	$Id: Makefile,v 1.3 1995/09/29 19:31:55 ache Exp $
+#	$Id: Makefile,v 1.4 1995/10/01 14:24:01 markm Exp $

-SUBDIR= cat chmod cp csh date dd df domainname echo ed expr hostname \
+SUBDIR= cat chio chmod cp csh date dd df domainname echo ed expr hostname \
 	kill ln ls mkdir mv pax ps pwd rcp rm rmail rmdir sh sleep \
 	stty sync test

@@ -32,10 +32,10 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.\"     @(#)cat.1	8.1 (Berkeley) 6/29/93
-.\"	$Id: cat.1,v 1.2 1994/09/24 02:53:25 davidg Exp $
+.\"     @(#)cat.1	8.3 (Berkeley) 5/2/95
+.\"	$Id: cat.1,v 1.6 1997/02/22 14:01:26 peter Exp $
 .\"
-.Dd June 29, 1993
+.Dd May 2, 1995
 .Dt CAT 1
 .Os BSD 3
 .Sh NAME
@@ -69,9 +69,7 @@ option, and displays a dollar sign
 at the end of each line
 as well.
 .It Fl n
-Number the
-.Ar output
-lines, starting at 1.
+Number the output lines, starting at 1.
 .It Fl s
 Squeeze multiple adjacent empty lines, causing the output to be
 single spaced.
@@ -79,7 +77,7 @@ single spaced.
 Implies the
 .Fl v
 option, and displays tab characters as
-.Pq Ql ^I
+.Ql ^I
 as well.
 .It Fl u
 The
@@ -109,7 +107,8 @@ will cause the original data in file1 to be destroyed!
 .Xr head 1 ,
 .Xr more 1 ,
 .Xr pr 1 ,
-.Xr tail 1
+.Xr tail 1 ,
+.Xr vis 1
 .Rs
 .%A Rob Pike
 .%T "UNIX Style, or cat -v Considered Harmful"
@@ -1,9 +0,0 @@
-#	@(#)Makefile	8.1 (Berkeley) 6/6/93
-
-NOSHARED=	true
-
-PROG=	chflags
-SRCS=	chflags.c stat_flags.c
-.PATH:	${.CURDIR}/../../bin/ls
-
-.include <bsd.prog.mk>
@@ -1,125 +0,0 @@
-.\" Copyright (c) 1989, 1990, 1993, 1994
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" This code is derived from software contributed to Berkeley by
-.\" the Institute of Electrical and Electronics Engineers, Inc.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"	@(#)chflags.1	8.2 (Berkeley) 3/31/94
-.\"
-.Dd March 31, 1994
-.Dt CHFLAGS 1
-.Os
-.Sh NAME
-.Nm chflags
-.Nd change file flags
-.Sh SYNOPSIS
-.Nm chflags
-.Oo
-.Fl R
-.Op Fl H | Fl L | Fl P
-.Oc
-.Ar flags
-.Ar file ...
-.Sh DESCRIPTION
-The
-.Nm chflags
-utility modifies the file flags of the listed files
-as specified by the
-.Ar flags
-operand.
-.Pp
-The options are as follows:
-.Bl -tag -width Ds
-.It Fl H
-If the
-.Fl R
-option is specified, symbolic links on the command line are followed.
-(Symbolic links encountered in the tree traversal are not followed.)
-.It Fl L
-If the
-.Fl R
-option is specified, all symbolic links are followed.
-.It Fl P
-If the
-.Fl R
-option is specified, no symbolic links are followed.
-.It Fl R
-Change the file flags for the file hierarchies rooted
-in the files instead of just the files themselves.
-.El
-.Pp
-Flags are a comma separated list of keywords.
-The following keywords are currently defined:
-.Bd -literal -offset indent compact
-arch	set the archived flag (super-user only)
-dump	set the dump flag
-sappnd	set the system append-only flag (super-user only)
-schg	set the system immutable flag (super-user only)
-uappnd	set the user append-only flag (owner or super-user only)
-uchg	set the user immutable flag (owner or super-user only)
-archived, sappend, schange, simmutable, uappend, uchange, uimmutable
-	aliases for the above
-.Ed
-.Pp
-Putting the letters
-.Dq no
-before an option causes the flag to be turned off.
-For example:
-.Bd -literal -offset indent compact
-nodump	the file should never be dumped
-.Ed
-.Pp
-Symbolic links do not have flags, so unless the
-.Fl H
-or
-.Fl L
-option is set,
-.Nm chflags
-on a symbolic link always succeeds and has no effect.
-The
-.Fl H ,
-.Fl L
-and
-.Fl P
-options are ignored unless the
-.Fl R
-option is specified.
-In addition, these options override each other and the
-command's actions are determined by the last one specified.
-.Pp
-The
-.Nm chflags
-utility exits 0 on success, and >0 if an error occurs.
-.Sh SEE ALSO
-.Xr chflags 2 ,
-.Xr stat 2 ,
-.Xr fts 3 ,
-.Xr symlink 7
@@ -1,180 +0,0 @@
-/*
- * Copyright (c) 1992, 1993, 1994
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef lint
-static char copyright[] =
-"@(#) Copyright (c) 1992, 1993, 1994\n\
-	The Regents of the University of California.  All rights reserved.\n";
-#endif /* not lint */
-
-#ifndef lint
-static char sccsid[] = "@(#)chflags.c	8.5 (Berkeley) 4/1/94";
-#endif /* not lint */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#include <err.h>
-#include <errno.h>
-#include <fts.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-u_long	string_to_flags __P((char **, u_long *, u_long *));
-void	usage __P((void));
-
-int
-main(argc, argv)
-	int argc;
-	char *argv[];
-{
-	FTS *ftsp;
-	FTSENT *p;
-	u_long clear, set;
-	long val;
-	int Hflag, Lflag, Pflag, Rflag, ch, fts_options, oct, rval;
-	char *flags, *ep;
-
-	Hflag = Lflag = Pflag = Rflag = 0;
-	while ((ch = getopt(argc, argv, "HLPR")) != EOF)
-		switch (ch) {
-		case 'H':
-			Hflag = 1;
-			Lflag = Pflag = 0;
-			break;
-		case 'L':
-			Lflag = 1;
-			Hflag = Pflag = 0;
-			break;
-		case 'P':
-			Pflag = 1;
-			Hflag = Lflag = 0;
-			break;
-		case 'R':
-			Rflag = 1;
-			break;
-		case '?':
-		default:
-			usage();
-		}
-	argv += optind;
-	argc -= optind;
-
-	if (argc < 2)
-		usage();
-
-	fts_options = FTS_PHYSICAL;
-	if (Rflag) {
-		if (Hflag)
-			fts_options |= FTS_COMFOLLOW;
-		if (Lflag) {
-			fts_options &= ~FTS_PHYSICAL;
-			fts_options |= FTS_LOGICAL;
-		}
-	}
-
-	flags = *argv;
-	if (*flags >= '0' && *flags <= '7') {
-		errno = 0;
-		val = strtol(flags, &ep, 8);
-		if (val < 0)
-			errno = ERANGE;
-		if (errno)
-                        err(1, "invalid flags: %s", flags);
-                if (*ep)
-                        errx(1, "invalid flags: %s", flags);
-		set = val;
-                oct = 1;
-	} else {
-		if (string_to_flags(&flags, &set, &clear))
-                        errx(1, "invalid flag: %s", flags);
-		clear = ~clear;
-		oct = 0;
-	}
-
-	if ((ftsp = fts_open(++argv, fts_options , 0)) == NULL)
-		err(1, NULL);
-
-	for (rval = 0; (p = fts_read(ftsp)) != NULL;) {
-		switch (p->fts_info) {
-		case FTS_D:
-			if (Rflag)		/* Change it at FTS_DP. */
-				continue;
-			fts_set(ftsp, p, FTS_SKIP);
-			break;
-		case FTS_DNR:			/* Warn, chflag, continue. */
-			warnx("%s: %s", p->fts_path, strerror(p->fts_errno));
-			rval = 1;
-			break;
-		case FTS_ERR:			/* Warn, continue. */
-		case FTS_NS:
-			warnx("%s: %s", p->fts_path, strerror(p->fts_errno));
-			rval = 1;
-			continue;
-		case FTS_SL:			/* Ignore. */
-		case FTS_SLNONE:
-			/*
-			 * The only symlinks that end up here are ones that
-			 * don't point to anything and ones that we found
-			 * doing a physical walk.
-			 */
-			continue;
-		default:
-			break;
-		}
-		if (oct) {
-			if (!chflags(p->fts_accpath, set))
-				continue;
-		} else {
-			p->fts_statp->st_flags |= set;
-			p->fts_statp->st_flags &= clear;
-			if (!chflags(p->fts_accpath, p->fts_statp->st_flags))
-				continue;
-		}
-		warn("%s", p->fts_path);
-		rval = 1;
-	}
-	if (errno)
-		err(1, "fts_read");
-	exit(rval);
-}
-
-void
-usage()
-{
-	(void)fprintf(stderr,
-	    "usage: chflags [-R [-H | -L | -P]] flags file ...\n");
-	exit(1);
-}
@@ -0,0 +1,9 @@
+#	$Id: $
+#	@(#)Makefile	8.1 (Berkeley) 6/6/93
+
+PROG=	chio
+SRCS=	chio.c
+BINOWN=	root
+BINMODE=4555
+
+.include <bsd.prog.mk>
@@ -0,0 +1,202 @@
+.\"	$NetBSD: $
+.\"
+.\" Copyright (c) 1996 Jason R. Thorpe <[email protected]>
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgements:
+.\"	This product includes software developed by Jason R. Thorpe
+.\"	for And Communications, http://www.and.com/
+.\" 4. The name of the author may not be used to endorse or promote products
+.\"    derived from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+.\" AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd April 2, 1996
+.Dt CHIO 1
+.Os
+.Sh NAME
+.Nm chio
+.Nd medium changer control utility
+.Sh SYNOPSIS
+.Nm chio
+.Op Fl f Ar changer
+.Ar command
+.Ar arg1
+.Ar arg2
+.Oo
+.Ar arg3 Oo ...
+.Oc
+.Oc
+.Sh DESCRIPTION
+.Nm Chio
+is used to control the operation of medium changers, such as those found
+in tape and optical disk jukeboxes.
+.Pp
+The options are as follows:
+.Bl -tag -width indent
+.It Fl f Ar changer
+Use the device
+.Pa changer
+rather than the default device
+.Pa /dev/ch0 .
+.El
+.Pp
+The default changer may be overridden by setting the environment variable
+.Nm CHANGER
+to the desired changer device.
+.Pp
+A medium changer apparatus is made up of
+.Pa elements .
+There are four element types:
+.Pa picker
+(medium transport),
+.Pa slot
+(storage),
+.Pa portal
+(import/export), and
+.Pa drive
+(data transfer).  In this command description, the shorthand
+.Nm ET
+will be used to represent an element type, and
+.Nm EU
+will be used to represent an element unit.  For example, to represent
+the first robotic arm in the changer, the ET would be
+.Dq picker
+and the EU would be
+.Dq 0 .
+.Pp
+.Sh SUPPORTED COMMANDS
+.Nm chio move
+.Ar <from ET> <from EU> <to ET> <to EU>
+.Op Ar inv
+.Pp
+Moves the media unit from
+.Pa <from ET/EU>
+to
+.Pa <to ET/EU> .
+If the optional modifier
+.Pa inv
+is specified, the media unit will be inverted before insertion.
+.Pp
+.Nm chio exchange
+.Ar <src ET> <src EU> <dst1 ET> <dst1 EU>
+.Op Ar <dst2 ET> <dst2 ET>
+.Op Ar inv1
+.Op Ar inv2
+.Pp
+Performs a media unit exchange operation.  The media unit in
+.Pa <src ET/EU>
+is moved to
+.Pa <dst1 ET/EU>
+and the media unit previously in
+.Pa <dst1 ET/EU>
+is moved to
+.Pa <dst2 ET/EU> .
+In the case of a simple exchange,
+.Pa <dst2 ET/EU>
+is omitted and the values
+.Pa <src ET/EU>
+are used in their place.
+The optional modifiers
+.Pa inv1
+and
+.Pa inv2
+specify whether the media units are to be inverted before insertion into
+.Pa <dst1 ET/EU>
+and
+.Pa <dst2 ET/EU>
+respecitively.
+.Pp
+Note that not all medium changers support the
+.Nm exchange
+operation; The changer must have multiple free pickers or emulate
+multiple free pickers with transient storage.
+.Pp
+.Nm chio position
+.Ar <to ET> <to EU>
+.Op Ar inv
+.Pp
+Position the picker in front of the element described by
+.Pa <to ET/EU> .
+If the optional modifier
+.Pa inv
+is specified, the media unit will be inverted before insertion.
+.Pp
+Note that not all changers behave as expected when issued this command.
+.Pp
+.Nm chio params
+.Pp
+Report the number of slots, drives, pickers, and portals in the changer,
+and which picker unit the changer is currently configured to use.
+.Pp
+.Nm chio getpicker
+.Pp
+Report which picker unit the changer is currently configured to use.
+.Pp
+.Nm chio setpicker
+.Ar <unit>
+.Pp
+Configure the changer to use picker
+.Pa <unit> .
+.Pp
+.Nm chio status
+.Op Ar <type>
+.Pp
+Report the status of all elements in the changer.  If
+.Pa <type>
+is specified, report the status of all elements of type
+.Pa <type> .
+.Pp
+The status bits are defined as follows:
+.Bl -tag -width indent
+.It Nm FULL
+Element contains a media unit.
+.It Nm IMPEXP
+Media was deposited into element by an outside human operator.
+.It Nm EXCEPT
+Element is in an abnormal state.
+.It Nm ACCESS
+Media in this element is accessible by a picker.
+.It Nm EXENAB
+Element supports passing media (exporting) to an outsite human operator.
+.It Nm INENAB
+Element supports receiving media (importing) from an outside human operator.
+.El
+.Pp
+.Sh EXAMPLES
+.Nm chio move slot 3 drive 0
+.Pp
+Moves the media in slot 3 (fourth slot) to drive 0 (first drive).
+.Pp
+.Nm chio setpicker 2
+Configures the changer to use picker 2 (third picker) for operations.
+.Pp
+.Sh FILES
+/dev/ch0 - default changer device
+.Sh SEE ALSO
+.Xr mt 1 ,
+.Xr mount 8 .
+.Sh AUTHOR
+The
+.Nm chio
+program and SCSI changer driver were written by Jason R. Thorpe
+<[email protected]> for And Communications, http://www.and.com/
@@ -0,0 +1,663 @@
+/*	$Id: $	*/
+
+/*
+ * Copyright (c) 1996 Jason R. Thorpe <[email protected]>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgements:
+ *	This product includes software developed by Jason R. Thorpe
+ *	for And Communications, http://www.and.com/
+ * 4. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/param.h>
+#include <sys/ioctl.h>
+#include <sys/chio.h> 
+#include <err.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "defs.h"
+#include "pathnames.h"
+
+extern	char *__progname;	/* from crt0.o */
+
+static	void usage __P((void));
+static	void cleanup __P((void));
+static	int parse_element_type __P((char *));
+static	int parse_element_unit __P((char *));
+static	int parse_special __P((char *));
+static	int is_special __P((char *));
+static	char *bits_to_string __P((int, const char *));
+
+static	int do_move __P((char *, int, char **));
+static	int do_exchange __P((char *, int, char **));
+static	int do_position __P((char *, int, char **));
+static	int do_params __P((char *, int, char **));
+static	int do_getpicker __P((char *, int, char **));
+static	int do_setpicker __P((char *, int, char **));
+static	int do_status __P((char *, int, char **));
+
+/* Valid changer element types. */
+const struct element_type elements[] = {
+	{ "picker",		CHET_MT },
+	{ "slot",		CHET_ST },
+	{ "portal",		CHET_IE },
+	{ "drive",		CHET_DT },
+	{ NULL,			0 },
+};
+
+/* Valid commands. */
+const struct changer_command commands[] = {
+	{ "move",		do_move },
+	{ "exchange",		do_exchange },
+	{ "position",		do_position },
+	{ "params",		do_params },
+	{ "getpicker",		do_getpicker },
+	{ "setpicker",		do_setpicker },
+	{ "status",		do_status },
+	{ NULL,			0 },
+};
+
+/* Valid special words. */
+const struct special_word specials[] = {
+	{ "inv",		SW_INVERT },
+	{ "inv1",		SW_INVERT1 },
+	{ "inv2",		SW_INVERT2 },
+	{ NULL,			0 },
+};
+
+static	int changer_fd;
+static	char *changer_name;
+
+int
+main(argc, argv)
+	int argc;
+	char **argv;
+{
+	int ch, i;
+	char *cp;
+
+	while ((ch = getopt(argc, argv, "f:")) != -1) {
+		switch (ch) {
+		case 'f':
+			changer_name = optarg;
+			break;
+
+		default:
+			usage();
+		}
+	}
+	argc -= optind;
+	argv += optind;
+
+	if (argc == 0)
+		usage();
+
+	/* Get the default changer if not already specified. */
+	if (changer_name == NULL)
+		if ((changer_name = getenv(CHANGER_ENV_VAR)) == NULL)
+			changer_name = _PATH_CH;
+
+	/* Open the changer device. */
+	if ((changer_fd = open(changer_name, O_RDWR, 0600)) == -1)
+		err(1, "%s: open", changer_name);
+
+	/* Register cleanup function. */
+	if (atexit(cleanup))
+		err(1, "can't register cleanup function");
+
+	/* Find the specified command. */
+	for (i = 0; commands[i].cc_name != NULL; ++i)
+		if (strcmp(*argv, commands[i].cc_name) == 0)
+			break;
+	if (commands[i].cc_name == NULL)
+		errx(1, "unknown command: %s", *argv);
+
+	/* Skip over the command name and call handler. */
+	++argv; --argc;
+	exit ((*commands[i].cc_handler)(commands[i].cc_name, argc, argv));
+}
+
+static int
+do_move(cname, argc, argv)
+	char *cname;
+	int argc;
+	char **argv;
+{
+	struct changer_move cmd;
+	int val;
+
+	/*
+	 * On a move command, we expect the following:
+	 *
+	 * <from ET> <from EU> <to ET> <to EU> [inv]
+	 *
+	 * where ET == element type and EU == element unit.
+	 */
+	if (argc < 4) {
+		warnx("%s: too few arguments", cname);
+		goto usage;
+	} else if (argc > 5) {
+		warnx("%s: too many arguments", cname);
+		goto usage;
+	}
+	bzero(&cmd, sizeof(cmd));
+
+	/* <from ET>  */
+	cmd.cm_fromtype = parse_element_type(*argv);
+	++argv; --argc;
+
+	/* <from EU> */
+	cmd.cm_fromunit = parse_element_unit(*argv);
+	++argv; --argc;
+
+	/* <to ET> */
+	cmd.cm_totype = parse_element_type(*argv);
+	++argv; --argc;
+
+	/* <to EU> */
+	cmd.cm_tounit = parse_element_unit(*argv);
+	++argv; --argc;
+
+	/* Deal with optional command modifier. */
+	if (argc) {
+		val = parse_special(*argv);
+		switch (val) {
+		case SW_INVERT:
+			cmd.cm_flags |= CM_INVERT;
+			break;
+
+		default:
+			errx(1, "%s: inappropriate modifier `%s'",
+			    cname, *argv);
+			/* NOTREACHED */
+		}
+	}
+
+	/* Send command to changer. */
+	if (ioctl(changer_fd, CHIOMOVE, (char *)&cmd))
+		err(1, "%s: CHIOMOVE", changer_name);
+
+	return (0);
+
+ usage:
+	fprintf(stderr, "usage: %s %s "
+	    "<from ET> <from EU> <to ET> <to EU> [inv]\n", __progname, cname);
+	return (1);
+}
+
+static int
+do_exchange(cname, argc, argv)
+	char *cname;
+	int argc;
+	char **argv;
+{
+	struct changer_exchange cmd;
+	int val;
+
+	/*
+	 * On an exchange command, we expect the following:
+	 *
+  * <src ET> <src EU> <dst1 ET> <dst1 EU> [<dst2 ET> <dst2 EU>] [inv1] [inv2]
+	 *
+	 * where ET == element type and EU == element unit.
+	 */
+	if (argc < 4) {
+		warnx("%s: too few arguments", cname);
+		goto usage;
+	} else if (argc > 8) {
+		warnx("%s: too many arguments", cname);
+		goto usage;
+	}
+	bzero(&cmd, sizeof(cmd));
+
+	/* <src ET>  */
+	cmd.ce_srctype = parse_element_type(*argv);
+	++argv; --argc;
+
+	/* <src EU> */
+	cmd.ce_srcunit = parse_element_unit(*argv);
+	++argv; --argc;
+
+	/* <dst1 ET> */
+	cmd.ce_fdsttype = parse_element_type(*argv);
+	++argv; --argc;
+
+	/* <dst1 EU> */
+	cmd.ce_fdstunit = parse_element_unit(*argv);
+	++argv; --argc;
+
+	/*
+	 * If the next token is a special word or there are no more
+	 * arguments, then this is a case of simple exchange.
+	 * dst2 == src.
+	 */
+	if ((argc == 0) || is_special(*argv)) {
+		cmd.ce_sdsttype = cmd.ce_srctype;
+		cmd.ce_sdstunit = cmd.ce_srcunit;
+		goto do_special;
+	}
+
+	/* <dst2 ET> */
+	cmd.ce_sdsttype = parse_element_type(*argv);
+	++argv; --argc;
+
+	/* <dst2 EU> */
+	cmd.ce_sdstunit = parse_element_unit(*argv);
+	++argv; --argc;
+
+ do_special:
+	/* Deal with optional command modifiers. */
+	while (argc) {
+		val = parse_special(*argv);
+		++argv; --argc;
+		switch (val) {
+		case SW_INVERT1:
+			cmd.ce_flags |= CE_INVERT1;
+			break;
+
+		case SW_INVERT2:
+			cmd.ce_flags |= CE_INVERT2;
+			break;
+
+		default:
+			errx(1, "%s: inappropriate modifier `%s'",
+			    cname, *argv);
+			/* NOTREACHED */
+		}
+	}
+
+	/* Send command to changer. */
+	if (ioctl(changer_fd, CHIOEXCHANGE, (char *)&cmd))
+		err(1, "%s: CHIOEXCHANGE", changer_name);
+
+	return (0);
+
+ usage:
+	fprintf(stderr, "usage: %s %s <src ET> <src EU> <dst1 ET> <dst1 EU>\n"
+	    "       [<dst2 ET> <dst2 EU>] [inv1] [inv2]\n",
+	    __progname, cname);
+	return (1);
+}
+
+static int
+do_position(cname, argc, argv)
+	char *cname;
+	int argc;
+	char **argv;
+{
+	struct changer_position cmd;
+	int val;
+
+	/*
+	 * On a position command, we expect the following:
+	 *
+	 * <to ET> <to EU> [inv]
+	 *
+	 * where ET == element type and EU == element unit.
+	 */
+	if (argc < 2) {
+		warnx("%s: too few arguments", cname);
+		goto usage;
+	} else if (argc > 3) {
+		warnx("%s: too many arguments", cname);
+		goto usage;
+	}
+	bzero(&cmd, sizeof(cmd));
+
+	/* <to ET>  */
+	cmd.cp_type = parse_element_type(*argv);
+	++argv; --argc;
+
+	/* <to EU> */
+	cmd.cp_unit = parse_element_unit(*argv);
+	++argv; --argc;
+
+	/* Deal with optional command modifier. */
+	if (argc) {
+		val = parse_special(*argv);
+		switch (val) {
+		case SW_INVERT:
+			cmd.cp_flags |= CP_INVERT;
+			break;
+
+		default:
+			errx(1, "%s: inappropriate modifier `%s'",
+			    cname, *argv);
+			/* NOTREACHED */
+		}
+	}
+
+	/* Send command to changer. */
+	if (ioctl(changer_fd, CHIOPOSITION, (char *)&cmd))
+		err(1, "%s: CHIOPOSITION", changer_name);
+
+	return (0);
+
+ usage:
+	fprintf(stderr, "usage: %s %s <to ET> <to EU> [inv]\n",
+	    __progname, cname);
+	return (1);
+}
+
+static int
+do_params(cname, argc, argv)
+	char *cname;
+	int argc;
+	char **argv;
+{
+	struct changer_params data;
+
+	/* No arguments to this command. */
+	if (argc) {
+		warnx("%s: no arguements expected", cname);
+		goto usage;
+	}
+
+	/* Get params from changer and display them. */
+	bzero(&data, sizeof(data));
+	if (ioctl(changer_fd, CHIOGPARAMS, (char *)&data))
+		err(1, "%s: CHIOGPARAMS", changer_name);
+
+	printf("%s: %d slot%s, %d drive%s, %d picker%s",
+	    changer_name,
+	    data.cp_nslots, (data.cp_nslots > 1) ? "s" : "",
+	    data.cp_ndrives, (data.cp_ndrives > 1) ? "s" : "",
+	    data.cp_npickers, (data.cp_npickers > 1) ? "s" : "");
+	if (data.cp_nportals)
+		printf(", %d portal%s", data.cp_nportals,
+		    (data.cp_nportals > 1) ? "s" : "");
+	printf("\n%s: current picker: %d\n", changer_name, data.cp_curpicker);
+
+	return (0);
+
+ usage:
+	fprintf(stderr, "usage: %s %s\n", __progname, cname);
+	return (1);
+}
+
+static int
+do_getpicker(cname, argc, argv)
+	char *cname;
+	int argc;
+	char **argv;
+{
+	int picker;
+
+	/* No arguments to this command. */
+	if (argc) {
+		warnx("%s: no arguments expected", cname);
+		goto usage;
+	}
+
+	/* Get current picker from changer and display it. */
+	if (ioctl(changer_fd, CHIOGPICKER, (char *)&picker))
+		err(1, "%s: CHIOGPICKER", changer_name);
+
+	printf("%s: current picker: %d\n", changer_name, picker);
+
+	return (0);
+
+ usage:
+	fprintf(stderr, "usage: %s %s\n", __progname, cname);
+	return (1);
+}
+
+static int
+do_setpicker(cname, argc, argv)
+	char *cname;
+	int argc;
+	char **argv;
+{
+	int picker;
+
+	if (argc < 1) {
+		warnx("%s: too few arguments", cname);
+		goto usage;
+	} else if (argc > 1) {
+		warnx("%s: too many arguments", cname);
+		goto usage;
+	}
+
+	picker = parse_element_unit(*argv);
+
+	/* Set the changer picker. */
+	if (ioctl(changer_fd, CHIOSPICKER, (char *)&picker))
+		err(1, "%s: CHIOSPICKER", changer_name);
+
+	return (0);
+
+ usage:
+	fprintf(stderr, "usage: %s %s <picker>\n", __progname, cname);
+	return (1);
+}
+
+static int
+do_status(cname, argc, argv)
+	char *cname;
+	int argc;
+	char **argv;
+{
+	struct changer_element_status cmd;
+	struct changer_params data;
+	u_int8_t *statusp;
+	int i, count, chet, schet, echet;
+	char *cmdname, *description;
+
+	/*
+	 * On a status command, we expect the following:
+	 *
+	 * [<ET>]
+	 *
+	 * where ET == element type.
+	 *
+	 * If we get no arguments, we get the status of all
+	 * known element types.
+	 */
+	if (argc > 1) {
+		warnx("%s: too many arguments", cname);
+		goto usage;
+	}
+
+	/*
+	 * Get params from changer.  Specifically, we need the element
+	 * counts.
+	 */
+	bzero(&data, sizeof(data));
+	if (ioctl(changer_fd, CHIOGPARAMS, (char *)&data))
+		err(1, "%s: CHIOGPARAMS", changer_name);
+
+	if (argc)
+		schet = echet = parse_element_type(*argv);
+	else {
+		schet = CHET_MT;
+		echet = CHET_DT;
+	}
+
+	for (chet = schet; chet <= echet; ++chet) {
+		switch (chet) {
+		case CHET_MT:
+			count = data.cp_npickers;
+			description = "picker";
+			break;
+
+		case CHET_ST:
+			count = data.cp_nslots;
+			description = "slot";
+			break;
+
+		case CHET_IE:
+			count = data.cp_nportals;
+			description = "portal";
+			break;
+
+		case CHET_DT:
+			count = data.cp_ndrives;
+			description = "drive";
+			break;
+		}
+
+		if (count == 0) {
+			if (argc == 0)
+				continue;
+			else {
+				printf("%s: no %s elements\n",
+				    changer_name, description);
+				return (0);
+			}
+		}
+
+		/* Allocate storage for the status bytes. */
+		if ((statusp = (u_int8_t *)malloc(count)) == NULL)
+			errx(1, "can't allocate status storage");
+
+		bzero(statusp, count);
+		bzero(&cmd, sizeof(cmd));
+
+		cmd.ces_type = chet;
+		cmd.ces_data = statusp;
+
+		if (ioctl(changer_fd, CHIOGSTATUS, (char *)&cmd)) {
+			free(statusp);
+			err(1, "%s: CHIOGSTATUS", changer_name);
+		}
+
+		/* Dump the status for each element of this type. */
+		for (i = 0; i < count; ++i) {
+			printf("%s %d: %s\n", description, i,
+			    bits_to_string(statusp[i], CESTATUS_BITS));
+		}
+
+		free(statusp);
+	}
+
+	return (0);
+
+ usage:
+	fprintf(stderr, "usage: %s %s [<element type>]\n", __progname,
+	    cname);
+	return (1);
+}
+
+static int
+parse_element_type(cp)
+	char *cp;
+{
+	int i;
+
+	for (i = 0; elements[i].et_name != NULL; ++i)
+		if (strcmp(elements[i].et_name, cp) == 0)
+			return (elements[i].et_type);
+
+	errx(1, "invalid element type `%s'", cp);
+}
+
+static int
+parse_element_unit(cp)
+	char *cp;
+{
+	int i;
+	char *p;
+
+	i = (int)strtol(cp, &p, 10);
+	if ((i < 0) || (*p != '\0'))
+		errx(1, "invalid unit number `%s'", cp);
+
+	return (i);
+}
+
+static int
+parse_special(cp)
+	char *cp;
+{
+	int val;
+
+	val = is_special(cp);
+	if (val)
+		return (val);
+
+	errx(1, "invalid modifier `%s'", cp);
+}
+
+static int
+is_special(cp)
+	char *cp;
+{
+	int i;
+
+	for (i = 0; specials[i].sw_name != NULL; ++i)
+		if (strcmp(specials[i].sw_name, cp) == 0)
+			return (specials[i].sw_value);
+
+	return (0);
+}
+
+static char *
+bits_to_string(v, cp)
+	int v;
+	const char *cp;
+{
+	const char *np;
+	char f, sep, *bp;
+	static char buf[128];
+
+	bp = buf;
+	bzero(buf, sizeof(buf));
+
+	for (sep = '<'; (f = *cp++) != 0; cp = np) {
+		for (np = cp; *np >= ' ';)
+			np++;
+		if ((v & (1 << (f - 1))) == 0)
+			continue;
+		bp += sprintf(bp, "%c%.*s", sep, np - cp, cp);
+		sep = ',';
+	}
+	if (sep != '<')
+		*bp = '>';
+
+	return (buf);
+}
+
+static void
+cleanup()
+{
+
+	/* Simple enough... */
+	(void)close(changer_fd);
+}
+
+static void
+usage()
+{
+
+	fprintf(stderr, "usage: %s command arg1 arg2 ...\n", __progname);
+	exit(1);
+}
@@ -0,0 +1,57 @@
+/*	$Id: $	*/
+
+/*
+ * Copyright (c) 1996 Jason R. Thorpe <[email protected]>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgements:
+ *	This product includes software developed by Jason R. Thorpe
+ *	for And Communications, http://www.and.com/
+ * 4. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+struct element_type {
+	char	*et_name;	/* name; i.e. "picker, "slot", etc. */
+	int	et_type;	/* type number */
+};
+
+struct changer_command {
+	char	*cc_name;	/* command name */
+				/* command handler */
+	int	(*cc_handler) __P((char *, int, char **));
+};
+
+struct special_word {
+	char	*sw_name;	/* special word */
+	int	sw_value;	/* token value */
+};
+
+/* sw_value */
+#define SW_INVERT	1	/* set "invert media" flag */
+#define SW_INVERT1	2	/* set "invert media 1" flag */
+#define SW_INVERT2	3	/* set "invert media 2" flag */
+
+/* Environment variable to check for default changer. */
+#define CHANGER_ENV_VAR		"CHANGER"
@@ -0,0 +1,35 @@
+/*	$Id: $	*/
+
+/*
+ * Copyright (c) 1996 Jason R. Thorpe <[email protected]>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgements:
+ *	This product includes software developed by Jason R. Thorpe
+ *	for And Communications, http://www.and.com/
+ * 4. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#define _PATH_CH	"/dev/ch0"
@@ -33,7 +33,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"	@(#)chmod.1	8.4 (Berkeley) 3/31/94
-.\"	$Id: chmod.1,v 1.3 1996/02/16 00:08:53 joerg Exp $
+.\"	$Id: chmod.1,v 1.7 1997/02/22 14:01:29 peter Exp $
 .\"
 .Dd March 31, 1994
 .Dt CHMOD 1
@@ -286,7 +286,8 @@ option for the naughty bits.
 .Sh STANDARDS
 The
 .Nm chmod
-utility is expected to be POSIX 1003.2
+utility is expected to be
+.St -p1003.2
 compatible with the exception of the
 .Ar perm
 symbols
@@ -33,7 +33,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"	@(#)cp.1	8.3 (Berkeley) 4/18/94
-.\"	$Id: cp.1,v 1.5 1996/03/08 06:58:05 wosch Exp $
+.\"	$Id: cp.1,v 1.9 1997/02/22 14:01:32 peter Exp $
 .\"
 .Dd April 18, 1994
 .Dt CP 1
@@ -213,7 +213,7 @@ or fifo's.
 .Xr umask 2 , 
 .Xr fts 3 ,
 .Xr symlink 7
-.Sh HISTORY
+.Sh STANDARDS
 The
 .Nm cp
 command is expected to be
@@ -30,7 +30,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"     @(#)csh.1	8.2 (Berkeley) 1/21/94
-.\"	$Id: csh.1,v 1.4 1996/04/06 09:47:15 mpp Exp $
+.\"	$Id: csh.1,v 1.8 1997/02/22 14:01:40 peter Exp $
 .\"
 .Dd January 21, 1994
 .Dt CSH 1
@@ -2121,13 +2121,13 @@ substitutions on a single line to 20.
 .Xr fork 2 ,
 .Xr killpg 2 ,
 .Xr pipe 2 ,
+.Xr setrlimit 2 ,
 .Xr sigvec 2 ,
 .Xr umask 2 ,
-.Xr setrlimit 2 ,
 .Xr wait 2 ,
 .Xr tty 4 ,
 .Xr a.out 5 ,
-.Xr environ 7 ,
+.Xr environ 7
 .br
 .Em An introduction to the C shell
 .Sh HISTORY
@@ -32,8 +32,8 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.\"     @(#)date.1	8.2 (Berkeley) 11/17/93
-.\"	$Id: date.1,v 1.7 1996/03/12 05:30:39 nate Exp $
+.\"     @(#)date.1	8.3 (Berkeley) 4/28/95
+.\"	$Id: date.1,v 1.11 1997/02/22 14:02:31 peter Exp $
 .\"
 .Dd November 17, 1993
 .Dt DATE 1
@@ -50,7 +50,7 @@
 .Op Cm + Ns Ar format
 .Op [yy[mm[dd[hh]]]]mm[\&.ss]
 .Sh DESCRIPTION
-.Nm Date
+.Nm
 displays the current date and time when invoked without arguments.
 Providing arguments will format the date and time in a user-defined
 way or set the date.
@@ -105,9 +105,11 @@ The format string may contain any of the conversion specifications described
 in the 
 .Xr strftime 3
 manual page, as well as any arbitrary text.
+A <newline> character is always output after the characters specified by
+the format string.
 The format string for the default display is:
 .Bd -literal -offset indent
-``%+''.
+``+%+''
 .Ed
 .Pp
 If an operand does not have a leading plus sign, it is interpreted as
@@ -137,7 +139,7 @@ and years are handled automatically.
 .Sh EXAMPLES
 The command:
 .Bd -literal -offset indent
-date ``+DATE: %m/%d/%y%nTIME: %H:%M:%S%n''
+date ``+DATE: %m/%d/%y%nTIME: %H:%M:%S''
 .Ed
 .Pp
 will display:
@@ -162,9 +164,10 @@ date 1432
 sets the time to
 .Li "2:32 PM" ,
 without modifying the date.
-.Sh ENVIRONMENTAL VARIABLES
-The following environment variables affect the execution of
-.Nm date :
+.Sh ENVIRONMENT VARIABLES
+The execution of
+.Nm
+is affected by the following evironment variables:
 .Bl -tag -width Ds
 .It Ev TZ
 The timezone to use when displaying dates.
@@ -30,7 +30,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: netdate.c,v 1.2 1994/09/24 02:54:38 davidg Exp $
+ *	$Id: netdate.c,v 1.3 1995/05/30 00:06:41 rgrimes Exp $
 */

 #ifndef lint
@@ -116,7 +116,8 @@ netsettime(tval)
 		warn("gethostname");
 		goto bad;
 	}
-	(void)strncpy(msg.tsp_name, hostname, sizeof(hostname));
+	(void)strncpy(msg.tsp_name, hostname, sizeof(msg.tsp_name));
+	msg.tsp_name[sizeof(msg.tsp_name) - 1] = '\0';
 	msg.tsp_seq = htons((u_short)0);
 	msg.tsp_time.tv_sec = htonl((u_long)tval);
 	msg.tsp_time.tv_usec = htonl((u_long)0);
@@ -34,7 +34,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id$
+ *	$Id: args.c,v 1.3 1994/09/24 02:54:42 davidg Exp $
 */

 #ifndef lint
@@ -100,7 +100,7 @@ jcl(argv)

 	in.dbsz = out.dbsz = 512;

-	while ((oper = *++argv)) {/* JEAG */
+	while ((oper = *++argv) != NULL) {
 		if ((arg = strchr(oper, '=')) == NULL)
 			errx(1, "unknown operand %s", oper);
 		*arg++ = '\0';
@@ -34,7 +34,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id$
+ *	$Id: conv.c,v 1.3 1994/09/24 02:54:44 davidg Exp $
 */

 #ifndef lint
@@ -61,7 +61,7 @@ def()
 	int cnt;
 	u_char *inp, *t;

-	if ((t = ctab))
+	if ((t = ctab) != NULL)
 		for (inp = in.dbp - (cnt = in.dbrcnt); cnt--; ++inp)
 			*inp = t[*inp];

@@ -105,7 +105,6 @@ block()
 	int ch, cnt, maxlen;
 	u_char *inp, *outp, *t;

-        ch = 0;
 	/*
 	 * Record truncation can cross block boundaries.  If currently in a
 	 * truncation state, keep tossing characters until reach a newline.
@@ -130,9 +129,10 @@ block()
 	 * Copy records (max cbsz size chunks) into the output buffer.  The
 	 * translation is done as we copy into the output buffer.
 	 */
+	ch = 0;			/* Help the compiler. */
 	for (inp = in.dbp - in.dbcnt, outp = out.dbp; in.dbcnt;) {
 		maxlen = MIN(cbsz, in.dbcnt);
-		if ((t = ctab))
+		if ((t = ctab) != NULL)
 			for (cnt = 0;
 			    cnt < maxlen && (ch = *inp++) != '\n'; ++cnt)
 				*outp++ = t[ch];
@@ -216,7 +216,7 @@ unblock()
 	u_char *inp, *t;

 	/* Translation and case conversion. */
-	if ((t = ctab))
+	if ((t = ctab) != NULL)
 		for (cnt = in.dbrcnt, inp = in.dbp; cnt--;)
 			*--inp = t[*inp];
 	/*
@@ -33,7 +33,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"     @(#)dd.1	8.2 (Berkeley) 1/13/94
-.\"	$Id$
+.\"	$Id: dd.1,v 1.4 1997/02/22 14:02:43 peter Exp $
 .\"
 .Dd January 13, 1994
 .Dt DD 1
@@ -34,7 +34,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: dd.c,v 1.4 1995/01/17 23:04:29 ache Exp $
+ *	$Id: dd.c,v 1.5 1995/10/23 21:31:48 ache Exp $
 */

 #ifndef lint
@@ -56,12 +56,12 @@ static char sccsid[] = "@(#)dd.c	8.5 (Berkeley) 4/2/94";
 #include <err.h>
 #include <errno.h>
 #include <fcntl.h>
+#include <locale.h>
 #include <signal.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
-#include <locale.h>

 #include "dd.h"
 #include "extern.h"
@@ -85,7 +85,7 @@ main(argc, argv)
 	int argc;
 	char *argv[];
 {
-	(void) setlocale(LC_CTYPE, "");
+	(void)setlocale(LC_CTYPE, "");
 	jcl(argv);
 	setup();

@@ -105,6 +105,7 @@ static void
 setup()
 {
 	u_int cnt;
+	struct timeval tv;

 	if (in.name == NULL) {
 		in.name = "stdin";
@@ -213,7 +214,8 @@ setup()
 						ctab[cnt] = cnt;
 			}
 		}
-	(void)time(&st.start);			/* Statistics timestamp. */
+	(void)gettimeofday(&tv, (struct timezone *)NULL);
+	st.start = tv.tv_sec + tv.tv_usec * 1e-6; 
 }

 static void
@@ -35,7 +35,7 @@
 * SUCH DAMAGE.
 *
 *	@(#)dd.h	8.3 (Berkeley) 4/2/94
- *	$Id$
+ *	$Id: dd.h,v 1.2 1994/09/24 02:54:54 davidg Exp $
 */

 /* Input/output stream state. */
@@ -70,7 +70,7 @@ typedef struct {
 	u_long	trunc;			/* # of truncated records */
 	u_long	swab;			/* # of odd-length swab blocks */
 	u_long	bytes;			/* # of bytes written */
-	time_t	start;			/* start time of dd */
+	double	start; 			/* start time of dd */
 } STAT;

 /* Flags (in ddflags). */
@@ -34,7 +34,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id$
+ *	$Id: misc.c,v 1.2 1994/09/24 02:55:01 davidg Exp $
 */

 #ifndef lint
@@ -42,6 +42,7 @@ static char sccsid[] = "@(#)misc.c	8.3 (Berkeley) 4/2/94";
 #endif /* not lint */

 #include <sys/types.h>
+#include <sys/time.h>

 #include <err.h>
 #include <stdio.h>
@@ -56,12 +57,14 @@ static char sccsid[] = "@(#)misc.c	8.3 (Berkeley) 4/2/94";
 void
 summary()
 {
-	time_t secs;
+	struct timeval tv;
+	double secs;
 	char buf[100];

-	(void)time(&secs);
-	if ((secs -= st.start) == 0)
-		secs = 1;
+	(void)gettimeofday(&tv, (struct timezone *)NULL);
+	secs = tv.tv_sec + tv.tv_usec * 1e-6 - st.start;
+	if (secs < 1e-6)
+		secs = 1e-6;
 	/* Use snprintf(3) so that we don't reenter stdio(3). */
 	(void)snprintf(buf, sizeof(buf),
 	    "%u+%u records in\n%u+%u records out\n",
@@ -78,7 +81,7 @@ summary()
 		(void)write(STDERR_FILENO, buf, strlen(buf));
 	}
 	(void)snprintf(buf, sizeof(buf),
-	    "%u bytes transferred in %u secs (%u bytes/sec)\n",
+	    "%u bytes transferred in %.6f secs (%.0f bytes/sec)\n",
 	    st.bytes, secs, st.bytes / secs);
 	(void)write(STDERR_FILENO, buf, strlen(buf));
 }
@@ -30,7 +30,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"     @(#)df.1	8.2 (Berkeley) 1/13/94
-.\"	$Id: df.1,v 1.3 1994/09/24 02:55:08 davidg Exp $
+.\"	$Id: df.1,v 1.4 1996/08/29 18:05:48 wosch Exp $
 .\"
 .Dd January 13, 1994
 .Dt DF 1
@@ -78,11 +78,14 @@ with the possibly stale statistics that were previously obtained.
 .It Fl t
 Only print out statistics for filesystems of the specified types.
 The recognized types are:
-ufs, nfs, mfs, lfs, msdos, fdesc, portal, kernfs, procfs, afs and isofs.
+ufs, nfs, mfs, lfs, msdos, fdesc, portal, kernfs, procfs, afs, isofs,
+iso9660fs, cdfs, and cd9660,
 along with the aggregates:
 all (the default),
-local (ufs, mfs, lfs, msdos, isofs),
+local (ufs, mfs, lfs, msdos, cd9660),
 and misc (fdesc, portal, kernfs, procfs).
+The names isofs, iso9660fs, cdfs, and cd9660 are aliases to each other
+all of them refering to the same type of file system.
 The string ``no'' may be prepending to a type to get its complement
 (e.g. ``nonfs'' to get non-NFS filesystems).  The first
 .Fl t
@@ -35,7 +35,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: df.c,v 1.7 1995/05/30 00:06:42 rgrimes Exp $
+ *	$Id: df.c,v 1.8 1996/01/14 18:55:09 bde Exp $
 */

 #ifndef lint
@@ -95,6 +95,8 @@ struct typetab {
 	{"procfs",	MT(MOUNT_PROCFS)},
 	{"afs",		MT(MOUNT_AFS)},
 	{"iso9660fs",	MT(MOUNT_CD9660)},
+	{"isofs",	MT(MOUNT_CD9660)},
+	{"cd9660",	MT(MOUNT_CD9660)},
 	{"cdfs",	MT(MOUNT_CD9660)},
 	{"misc",	MT(MOUNT_LOFS)|MT(MOUNT_FDESC)|MT(MOUNT_PORTAL)|
 			MT(MOUNT_KERNFS)|MT(MOUNT_PROCFS)},
@@ -29,10 +29,10 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.\"	@(#)hostname.1	8.1 (Berkeley) 5/31/93
-.\"	$Id: hostname.1,v 1.2 1994/09/24 02:55:40 davidg Exp $
+.\"	@(#)hostname.1	8.2 (Berkeley) 4/28/95
+.\"	$Id: hostname.1,v 1.6 1997/02/22 14:03:41 peter Exp $
 .\"
-.Dd May 31, 1993
+.Dd April 28, 1995
 .Dt HOSTNAME 1
 .Os BSD 4.2
 .Sh NAME
@@ -41,9 +41,9 @@
 .Sh SYNOPSIS
 .Nm hostname
 .Op Fl s
-.Op Ar nameofhost
+.Op Ar name-of-host
 .Sh DESCRIPTION
-.Nm Hostname
+.Nm
 prints the name of the current host.  The super-user can
 set the hostname by supplying an argument; this is usually done in the
 network initialization script
@@ -33,7 +33,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id$
+ *	$Id: cmp.c,v 1.2 1994/09/24 02:55:52 davidg Exp $
 */

 #ifndef lint
@@ -53,14 +53,14 @@ int
 namecmp(a, b)
 	const FTSENT *a, *b;
 {
-	return (strcmp(a->fts_name, b->fts_name));
+	return (strcoll(a->fts_name, b->fts_name));
 }

 int
 revnamecmp(a, b)
 	const FTSENT *a, *b;
 {
-	return (strcmp(b->fts_name, a->fts_name));
+	return (strcoll(b->fts_name, a->fts_name));
 }

 int
@@ -33,7 +33,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"     @(#)ls.1	8.6 (Berkeley) 4/18/94
-.\"	$Id: ls.1,v 1.4 1995/09/26 08:48:09 mpp Exp $
+.\"	$Id: ls.1,v 1.5.2.1 1997/02/25 00:38:13 mpp Exp $
 .\"
 .Dd April 18, 1994
 .Dt LS 1
@@ -43,7 +43,7 @@
 .Nd list directory contents
 .Sh SYNOPSIS
 .Nm ls
-.Op Fl ACFLRTacdfiloqrstu1
+.Op Fl ACFLRTacdfgiloqrstu1
 .Op Ar file ...
 .Sh DESCRIPTION
 For each operand that names a
@@ -104,6 +104,13 @@ Directories are listed as plain files (not searched recursively) and
 symbolic links in the argument list are not indirected through.
 .It Fl f
 Output is not sorted.
+.It Fl g
+This option is deprecated and is only available for compatibility
+with 
+.Bx 4.3 ;
+it was used to display the group name in the long
+.Pq Fl l
+format output.
 .It Fl i
 For each file, print the file's file serial number (inode number).
 .It Fl k
@@ -116,7 +123,7 @@ sizes is output on a line before the long listing.
 .It Fl o
 Include the file flags in a long
 .Pq Fl l
-output
+output.
 .It Fl q
 Force printing of non-graphic characters in file names as
 the character `?'; this is the default when output is to a terminal.
@@ -33,7 +33,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"	@(#)mkdir.1	8.2 (Berkeley) 1/25/94
-.\"	$Id: mkdir.1,v 1.2 1994/09/24 02:56:02 davidg Exp $
+.\"	$Id: mkdir.1,v 1.6 1997/02/22 14:04:08 peter Exp $
 .\"
 .Dd January 25, 1994
 .Dt MKDIR 1
@@ -47,7 +47,7 @@
 .Op Fl m Ar mode
 .Ar directory_name  ...
 .Sh DESCRIPTION
-.Nm Mkdir
+.Nm
 creates the directories named as operands, in the order specified,
 using mode
 .Li rwxrwxrwx (\&0777)
@@ -81,7 +81,7 @@ permission for the owner.
 .Pp
 The user must have write permission in the parent directory.
 .Pp
-.Nm Mkdir
+.Nm
 exits 0 if successful, and >0 if an error occurred.
 .Sh SEE ALSO
 .Xr rmdir 1
@@ -30,7 +30,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: fmt.c,v 1.5 1995/03/09 20:40:17 davidg Exp $
+ *	$Id: fmt.c,v 1.6 1995/10/23 21:03:40 ache Exp $
 */

 #ifndef lint
@@ -59,7 +59,7 @@ shquote(argv)
 	char **argv;
 {
 	char **p, *dst, *src;
-	static char buf[ARG_MAX];		/* XXX */
+	static char buf[4*ARG_MAX];		/* XXX */

 	if (*argv == 0) {
 		buf[0] = 0;
@@ -30,7 +30,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: ps.c,v 1.12 1996/01/20 10:43:54 mpp Exp $
+ *	$Id: ps.c,v 1.13 1996/10/21 07:30:26 peter Exp $
 */

 #ifndef lint
@@ -47,7 +47,6 @@ static char sccsid[] = "@(#)ps.c	8.4 (Berkeley) 4/2/94";
 #include <sys/user.h>
 #include <sys/time.h>
 #include <sys/resource.h>
-#include <sys/proc.h>
 #include <sys/stat.h>
 #include <sys/ioctl.h>
 #include <sys/sysctl.h>
@@ -32,10 +32,10 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.\"     @(#)pwd.1	8.1 (Berkeley) 5/31/93
-.\"	$Id$
+.\"     @(#)pwd.1	8.2 (Berkeley) 4/28/95
+.\"	$Id: pwd.1,v 1.5 1997/02/22 14:05:15 peter Exp $
 .\"
-.Dd May 31, 1993
+.Dd April 28, 1995
 .Dt PWD 1
 .Os BSD 4
 .Sh NAME
@@ -44,7 +44,7 @@
 .Sh SYNOPSIS
 .Nm pwd
 .Sh DESCRIPTION
-.Nm Pwd
+.Nm
 writes the absolute pathname of the current working directory to
 the standard output.
 .Pp
@@ -54,11 +54,11 @@ The
 .Nm pwd
 command is expected to be
 .St -p1003.2
-compatible .
+compatible.
 .Sh SEE ALSO
 .Xr cd 1 ,
 .Xr csh 1 ,
-.Xr getwd 3
+.Xr getcwd 3
 .Sh BUGS
 In
 .Xr csh  1
@@ -30,7 +30,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"	@(#)rcp.1	8.1 (Berkeley) 5/31/93
-.\"	$Id$
+.\"	$Id: rcp.1,v 1.5 1997/02/22 14:05:21 peter Exp $
 .\"
 .Dd May 31, 1993
 .Dt RCP 1
@@ -130,8 +130,8 @@ are on the current machine.
 .Sh SEE ALSO
 .Xr cp 1 ,
 .Xr ftp 1 ,
-.Xr rsh 1 ,
-.Xr rlogin 1
+.Xr rlogin 1 ,
+.Xr rsh 1
 .Sh HISTORY
 The
 .Nm rcp
@@ -30,7 +30,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"	@(#)rmail.8	6.10 (Berkeley) 4/29/93
-.\"	$Id$
+.\"	$Id: rmail.8,v 1.5 1997/02/22 14:05:30 peter Exp $
 .\"
 .Dd April 29, 1993
 .Dt RMAIL 8
@@ -42,7 +42,7 @@
 .Nm rmail
 .Ar user ...
 .Sh DESCRIPTION
-.Nm Rmail
+.Nm
 interprets incoming mail received via
 .Xr uucp 1 ,
 collapsing ``From'' lines in the form generated
@@ -52,7 +52,7 @@ into a single line of the form ``return-path!sender'',
 and passing the processed mail on to
 .Xr sendmail  8  .
 .Pp
-.Nm Rmail
+.Nm
 is explicitly designed for use with
 .Xr uucp
 and
@@ -67,6 +67,6 @@ The
 program appeared in
 .Bx 4.2 .
 .Sh BUGS
-.Nm Rmail
+.Nm
 should not reside in
 .Pa /bin .
@@ -33,7 +33,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: eval.c,v 1.6 1996/10/06 15:17:19 steve Exp $
+ *	$Id: eval.c,v 1.8 1996/11/12 18:35:06 peter Exp $
 */

 #ifndef lint
@@ -854,24 +854,7 @@ cmddone:
 parent:	/* parent process gets here (if we forked) */
 	if (mode == 0) {	/* argument to fork */
 		INTOFF;
-		if (minusc) {
-			struct sigaction iact, qact, oiact, oqact;
-
-			(void)sigaction(SIGINT, (struct sigaction *)NULL, &oiact);
-			(void)sigaction(SIGQUIT, (struct sigaction *)NULL, &oqact);
-
-			iact = oiact;
-			qact = oqact;
-
-			qact.sa_handler = iact.sa_handler = SIG_IGN;
-
-			(void)sigaction(SIGINT, &iact, (struct sigaction *)NULL);
-			(void)sigaction(SIGQUIT, &qact, (struct sigaction *)NULL);
-			exitstatus = waitforjob(jp);
-			(void)sigaction(SIGINT, &oiact, (struct sigaction *)NULL);
-			(void)sigaction(SIGQUIT, &oqact, (struct sigaction *)NULL);
-		} else
-			exitstatus = waitforjob(jp);
+		exitstatus = waitforjob(jp);
 		INTON;
 	} else if (mode == 2) {
 		backcmd->fd = pip[0];
@@ -33,7 +33,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: expand.c,v 1.10 1996/09/10 02:42:30 peter Exp $
+ *	$Id: expand.c,v 1.11 1996/10/31 07:15:54 ache Exp $
 */

 #ifndef lint
@@ -335,7 +335,10 @@ expari(flag)
 	 * have to rescan starting from the beginning since CTLESC
 	 * characters have to be processed left to right.
 	 */
-	CHECKSTRSPACE(8, expdest);
+#if INT_MAX / 1000000000 >= 10 || INT_MIN / 1000000000 <= -10
+#error "integers with more than 10 digits are not supported"
+#endif
+	CHECKSTRSPACE(12 - 2, expdest);
 	USTPUTC('\0', expdest);
 	start = stackblock();
 	p = expdest;
@@ -350,7 +353,7 @@ expari(flag)
 	if (quotes)
 		rmescapes(p+1);
 	result = arith(p+1);
-	fmtstr(p, 10, "%d", result);
+	fmtstr(p, 12, "%d", result);
 	while (*p++)
 		;
 	result = expdest - p + 1;
@@ -33,7 +33,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: jobs.c,v 1.7 1996/09/03 14:15:52 peter Exp $
+ *	$Id: jobs.c,v 1.8 1996/10/16 02:30:39 steve Exp $
 */

 #ifndef lint
@@ -580,8 +580,7 @@ forkshell(jp, n, mode)
 				pgrp = getpid();
 			else
 				pgrp = jp->ps[0].pid;
-			setpgid(0, pgrp);
-			if (mode == FORK_FG) {
+			if (setpgid(0, pgrp) == 0 && mode == FORK_FG) {
 				/*** this causes superfluous TIOCSPGRPS ***/
 				if (ioctl(2, TIOCSPGRP, (char *)&pgrp) < 0)
 					error("TIOCSPGRP failed, errno=%d", errno);
@@ -33,7 +33,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: options.c,v 1.7 1996/09/01 10:21:16 peter Exp $
+ *	$Id: options.c,v 1.8 1996/10/29 03:12:48 steve Exp $
 */

 #ifndef lint
@@ -408,6 +408,7 @@ atend:
 		if (*p == '\0' && (p = *shellparam.optnext++) == NULL) {
 			out1fmt("No arg for -%c option\n", c);
 			c = '?';
+			shellparam.optnext--;
 			goto out;
 		}
 		setvar("OPTARG", p, 0);
@@ -33,7 +33,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"	@(#)sh.1	8.6 (Berkeley) 5/4/95
-.\"	$Id: sh.1,v 1.8 1996/09/03 14:15:59 peter Exp $
+.\"	$Id: sh.1,v 1.12 1997/02/22 13:58:43 peter Exp $
 .\"
 .na
 .TH SH 1
@@ -200,11 +200,11 @@ no effect when set after the shell has already started
 running (i.e. with set(1)).
 .TP
 -V    vi
-Enable the builtin vi(1) command line editor (disables
+Enable the built-in vi(1) command line editor (disables
 -E if it has been set).
 .TP
 -E    emacs
-Enable the builtin emacs(1) command line editor (disables
+Enable the built-in emacs(1) command line editor (disables
 -V if it has been set).
 .TP
 -b    notify
@@ -250,7 +250,8 @@ a <newline> is treated as a line continuation.
 .sp
 .LP
 Enclosing characters in single quotes preserves the literal
-meaning of all the characters.
+meaning of all the characters (except single quotes, making
+it impossible to put single-quotes in a single-quoted string).
 .sp 2
 .B Double Quotes
 .sp
@@ -355,33 +356,33 @@ previously.  Following is a list of the possible redirections.
 The [n] is an optional number, as in '3' (not '[3]'), that
 refers to a file descriptor.
 .TP
-[n]> file	
+[n]> file
 Redirect standard output (or n) to file.
 .TP
-[n]>| file	
+[n]>| file
 Same, but override the -C option.
 .TP
-[n]>> file	
+[n]>> file
 Append standard output (or n) to file.
 .TP
-[n]< file	
+[n]< file
 Redirect standard input (or n) from file.
 .TP
-[n1]<&n2	
+[n1]<&n2
 Duplicate standard input (or n1) from
 file descriptor n2.
 .TP
-[n]<&-		
+[n]<&-
 Close standard input (or n).
 .TP
-[n1]>&n2	
+[n1]>&n2
 Duplicate standard output (or n) from
 n2.
 .TP
-[n]>&-		
+[n]>&-
 Close standard output (or n).
 .TP
-[n]<> file	
+[n]<> file
 Open file for reading and writing on
 standard input (or n).
 .LP
@@ -406,11 +407,13 @@ in the here-doc-text are stripped.
 .B Search and Execution
 .sp
 .LP
-There are three types of commands: shell functions, builtin commands, and normal programs -- and the
+There are three types of commands: shell functions,
+builtin commands, and normal programs -- and the
 command is searched for (by name) in that order.  They
 each are executed in a different way.
 .LP
-When a shell function is executed, all of the shell positional parameters (except $0, which remains unchanged) are
+When a shell function is executed, all of the shell positional
+parameters (except $0, which remains unchanged) are
 set to the arguments of the shell function.
 The variables which are explicitly placed in the environment of
 the command (by placing assignments to them before the
@@ -418,37 +421,49 @@ function name) are made local to the function and are set
 to the values given. Then the command given in the function
 definition is executed.   The positional parameters are
 restored to their original values when the command completes.
+This all occurs within the current shell.
 .LP
-Shell builtins are executed internally to the shell, without spawning a new process.
+Shell builtins are executed internally to the shell, without
+spawning a new process.
 .LP
 Otherwise, if the command name doesn't match a function
 or builtin, the command is searched for as a normal
 program in the filesystem (as described in the next section).
 When a normal program is executed, the shell runs the program,
 passing the arguments and the environment to the
-program. If the program is a shell procedure, the shell
-will interpret the program in a subshell.  The shell will
+program. If the program is not a normal executable file
+(i.e., if it does not begin with the "magic number"
+whose ASCII representation is "#!", so execve(2) returns
+ENOEXEC then) the shell
+will interpret the program in a subshell.  The child shell will
 reinitialize itself in this case, so that the effect will
-be as if a new shell had been invoked to handle the shell
-procedure, except that the location of commands located in
+be as if a new shell had been invoked to handle the ad-hoc shell
+script, except that the location of hashed commands located in
 the parent shell will be remembered by the child.
+.LP
+Note that previous versions of this document
+and the source code itself misleadingly and sporadically
+refer to a shell script without a magic number
+as a "shell procedure".
 .sp 2
 .B Path Search
 .sp
 .LP
 When locating a command, the shell first looks to see if
 it has a shell function by that name.  Then it looks for a
-builtin command by that name.
-Finally, it searches each
-entry in PATH in turn for the command.
-.LP
+builtin command by that name.  If a builtin command is not found,
+one of two things happen:
+.sp
+1) Command names containing a slash are simply executed without
+performing any searches.
+.sp
+2) The shell searches each entry in PATH in turn for the command.
 The value of the PATH variable should be a series of
 entries separated by colons.  Each entry consists of a
 directory name.
 The current directory
-may be indicated by an empty directory name.
-.LP
-Command names containing a slash are simply executed without performing any of the above searches.
+may be indicated implicitly by an empty directory name,
+or explicitly by a single period.
 .sp 2
 .B Command Exit Status
 .sp
@@ -459,7 +474,7 @@ with zero for normal or success, and non-zero for failure,
 error, or a false indication.  The man page for each command
 should indicate the various exit codes and what they mean.
 Additionally, the builtin commands return exit codes, as does
-an executed function.
+an executed shell function.
 .sp 2
 .B Complex Commands
 .sp
@@ -484,13 +499,14 @@ command.  More generally, a command is one of the following:
 Unless otherwise stated, the exit status of a command is
 that of the last simple command executed by the command.
 .sp 2
-.B Pipeline
+.B Pipelines
 .sp
 .LP
 A pipeline is a sequence of one or more commands separated
 by the control operator |.  The standard output of all but
 the last command is connected to the standard input
-of the next command.
+of the next command.  The standard output of the last
+command is inherited from the shell, as usual.
 .LP
 The format for a pipeline is:
 .nf
@@ -530,6 +546,12 @@ to the standard input of command2.
 A ; or <newline> terminator causes the preceding
 AND-OR-list (described next) to be executed sequentially; a & causes
 asynchronous execution of the preceding AND-OR-list.
+.LP
+Note that unlike some other shells, each process in the
+pipeline is a child of the invoking shell (unless it
+is a shell builtin, in which case it executes in the
+current shell -- but any effect it has on the
+environment is wiped).
 .sp 2
 .B Background Commands -- &
 .sp
@@ -560,6 +582,9 @@ If command is followed by an ampersand, the shell starts the
 command and immediately proceed onto the next command;
 otherwise it waits for the command to terminate before
 proceeding to the next one.
+.sp 2
+.B Short-Circuit List Operators
+.sp
 .LP
 ``&&'' and ``||'' are AND-OR list operators.  ``&&'' executes
 the first command, and then executes the second command
@@ -567,6 +592,9 @@ iff the exit status of the first command is zero.  ``||''
 is similar, but executes the second command iff the exit
 status of the first command is nonzero.  ``&&'' and ``||''
 both have the same priority.
+.sp 2
+.B Flow-Control Constructs -- if, while, for, case
+.sp
 .LP
 The syntax of the if command is
 .nf
@@ -587,7 +615,9 @@ The syntax of the while command is
    done

 .fi
-The two lists are executed repeatedly while the exit status of the first list is zero.  The until command is similar, but has the word until in place of while
+The two lists are executed repeatedly while the exit status of the
+first list is zero.  The until command is similar, but has the word
+until in place of while, which causes it to
 repeat until the exit status of the first list is zero.
 .LP
 The syntax of the for command is
@@ -610,7 +640,8 @@ The syntax of the break and continue command is

 .fi
 Break terminates the num innermost for or while loops.
-Continue continues with the next iteration of the innermost loop.  These are implemented as builtin commands.
+Continue continues with the next iteration of the innermost loop.
+These are implemented as builtin commands.
 .LP
 The syntax of the case command is
 .nf
@@ -624,7 +655,9 @@ The syntax of the case command is
 .LP
 The pattern can actually be one or more patterns (see Shell
 Patterns described later), separated by ``|'' characters.
-
+.sp 2
+.B Grouping Commands Together
+.sp
 .LP
 Commands may be grouped by writing either
 .nf
@@ -639,6 +672,17 @@ or

 .fi
 The first of these executes the commands in a subshell.
+Builtin commands grouped into a (list) will not affect
+the current shell.
+The second form does not fork another shell so is
+slightly more efficient.
+Grouping commands together this way allows you to
+redirect their output as though they were one program:
+.nf
+
+    { echo -n "hello"; echo " world" } > greeting
+
+.fi
 .sp 2
 .B Functions
 .sp
@@ -799,7 +843,7 @@ The $ character is used to introduce parameter expansion, command
 substitution, or arithmetic evaluation.
 .sp 2
 .B Tilde Expansion (substituting a user's home directory)
-.sp	
+.sp
 .LP
 A word beginning with an unquoted tilde character (~) is
 subjected to tilde expansion.  All the characters up to
@@ -889,13 +933,13 @@ String Length.  The length in characters of
 the value of parameter.
 .LP
 The following four varieties of parameter expansion provide for substring
-processing.  In each case, pattern matching notation (see Shell Patterns), rather
+processing.  In each case, pattern matching notation (see Shell Patterns),
+rather
 than regular expression notation, is used to evaluate the patterns.
 If parameter is * or @, the result of the expansion is unspecified.
 Enclosing the full parameter expansion string in double-quotes does not
 cause the following four varieties of pattern characters to be quoted,
 whereas quoting characters within the braces has this effect.
-(UNIMPLEMENTED IN 4.4alpha)
 .TP
 ${parameter%word}
 Remove Smallest Suffix Pattern.  The word
@@ -903,7 +947,6 @@ is expanded to produce a pattern.  The
 parameter expansion then results in
 parameter, with the smallest portion of the
 suffix matched by the pattern deleted.
-
 .TP
 ${parameter%%word}
 Remove Largest Suffix Pattern.  The word
@@ -991,12 +1034,14 @@ substitution into fields.
 .B Pathname Expansion (File Name Generation)
 .sp
 .LP
-Unless the -f flag is set, file name generation is performed after word splitting is complete.  Each word is
+Unless the -f flag is set, file name generation is performed
+after word splitting is complete.  Each word is
 viewed as a series of patterns, separated by slashes.  The
 process of expansion replaces the word with the names of
 all existing files whose names can be formed by replacing
 each pattern with a string that matches the specified pattern.
-There are two restrictions on this: first, a pattern cannot match a string containing a slash, and second,
+There are two restrictions on this: first, a pattern cannot match
+a string containing a slash, and second,
 a pattern cannot match a string starting with a period
 unless the first character of the pattern is a period.
 The next section describes the patterns used for both
@@ -1037,8 +1082,8 @@ minus sign, make it the first or last character listed
 .LP
 This section lists the builtin commands which
 are builtin because they need to perform some  operation
-that can't be performed by a separate process. In addition
-to these, there are several other commands that may
+that can't be performed by a separate process. In addition to
+these, there are several other commands that may
 be builtin for efficiency (e.g. printf(1), echo(1), test(1),
 etc).
 .TP
@@ -1060,8 +1105,8 @@ Continue the specified jobs (or the current job if no
 jobs are given) in the background.
 .TP
 command command arg...
-Execute the specified builtin command.  (This is useful
-when you have a shell function with the same name
+Execute the specified builtin command.  (This is useful when you
+have a shell function with the same name
 as a builtin command.)
 .TP
 cd [ directory ]
@@ -1071,7 +1116,8 @@ of the cd command or the shell variable CDPATH is set
 and the directory name does not begin with a slash,
 then the directories listed in CDPATH will be
 searched for the specified directory.  The format of
-CDPATH is the same as that of PATH. In an interactive shell, the cd command will print out the name of
+CDPATH is the same as that of PATH. In an interactive shell,
+the cd command will print out the name of
 the directory that it actually switched to if this is
 different from the name that the user gave.  These
 may be different either because the CDPATH mechanism
@@ -1085,7 +1131,8 @@ exec [ command arg...  ]
 Unless command is omitted, the shell process is
 replaced with the specified program (which must be a
 real program, not a shell builtin or function).   Any
-redirections on the exec command are marked as permanent, so that they are not undone when the exec command finishes.
+redirections on the exec command are marked as permanent,
+so that they are not undone when the exec command finishes.
 .TP
 exit [ exitstatus ]
 Terminate the shell process.  If exitstatus is given
@@ -1183,6 +1230,14 @@ foreground.
 .TP
 getopts optstring var
 The POSIX getopts command.
+The getopts command deprecates the older getopt command.
+The first argument should be a series of letters, each possibly
+followed by a colon which indicates that the option takes an argument.
+The specified variable is set to the parsed option.  The index of
+the next argument is placed into the shell variable OPTIND.
+If an option takes an argument, it is placed into the shell variable
+OPTARG.  If an invalid option is encountered, var is set to '?'.
+It returns a false value (1) when it encounters the end of the options.
 .TP
 hash -rv command...
 The shell maintains a hash table which remembers the
@@ -1192,8 +1247,8 @@ table.  Entries which have not been looked at since
 the last cd command are marked with an asterisk; it
 is possible for these entries to be invalid.
 .sp
-With arguments, the hash command removes the specified
-commands from the hash table (unless they are
+With arguments, the hash command removes the specified commands
+from the hash table (unless they are
 functions) and then locates them.   With the -v
 option, hash prints the locations of the commands as
 it finds them.  The -r option causes the hash command
@@ -1261,7 +1316,8 @@ called ``Argument List Processing''.
 The third use of the set command is to set the values
 of the shell's positional parameters to the specified
 args.   To change the positional parameters without
-changing any options, use ``--'' as the first argument to set.  If no args are present, the set command
+changing any options, use ``--'' as the first argument
+to set.  If no args are present, the set command
 will clear all the positional parameters (equivalent
 to executing ``shift $#''.
 .TP
@@ -1341,8 +1397,8 @@ The maximal amount of CPU time to be used by each process, in seconds.
 .RE
 .TP
 umask [ mask ]
-Set the value of umask (see umask(2)) to the specified octal value.
-If the argument is omitted, the
+Set the value of umask (see umask(2)) to the specified
+octal value. If the argument is omitted, the
 umask value is printed.
 .TP
 unalias [-a] [name]
@@ -33,7 +33,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"	@(#)sleep.1	8.3 (Berkeley) 4/18/94
-.\"	$Id$
+.\"	$Id: sleep.1,v 1.6 1997/02/22 14:05:44 peter Exp $
 .\"
 .Dd April 18, 1994
 .Dt SLEEP 1
@@ -50,13 +50,13 @@ The
 command
 suspends execution for a minimum of
 .Ar seconds .
-.Nm Sleep
+.Nm
 is used to schedule the execution of other commands (see
 .Sx EXAMPLES
 below).
 .Pp
 The
-.Nm Sleep
+.Nm
 utility exits with one of the following values:
 .Bl -tag -width flag
 .It Li \&0
@@ -105,10 +105,10 @@ when the file is found, then another portion processing
 is done courteously by sleeping for 70 seconds in between each
 awk job.
 .Sh SEE ALSO
+.Xr at 1 ,
 .Xr setitimer 2 ,
 .Xr alarm 3 ,
-.Xr sleep 3 ,
-.Xr at 1
+.Xr sleep 3
 .Sh STANDARDS
 The
 .Nm sleep
@@ -30,7 +30,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: key.c,v 1.3 1995/03/19 13:29:25 joerg Exp $
+ *	$Id: key.c,v 1.4 1995/04/28 19:29:29 ache Exp $
 */

 #ifndef lint
@@ -192,7 +192,7 @@ f_extproc(ip)
 	struct info *ip;
 {

-	if (ip->set) {
+	if (!ip->off) {
 		int tmp = 1;
 		(void)ioctl(ip->fd, TIOCEXT, &tmp);
 	} else {
@@ -33,7 +33,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"     @(#)stty.1	8.4 (Berkeley) 4/18/94
-.\"	$Id: stty.1,v 1.3 1995/11/11 03:31:13 bde Exp $
+.\"	$Id: stty.1,v 1.7 1997/03/12 15:59:22 mpp Exp $
 .\"
 .Dd April 18, 1994
 .Dt STTY 1
@@ -551,7 +551,7 @@ The converse of
 .Cm opost .
 .It Cm tabs Pq Fl tabs
 The converse of
-.Cm tabs .
+.Cm oxtabs .
 .It Cm brk Ar value
 Same as the control character
 .Cm eol .
@@ -33,7 +33,7 @@
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
- *	$Id: test.c,v 1.12 1995/10/28 11:54:42 ache Exp $
+ *	$Id: test.c,v 1.13 1996/03/11 11:01:03 joerg Exp $
 */

 #ifndef lint
@@ -157,7 +157,7 @@ main(argc, argv)
 			ret_val = posix_unary_op(&argv[1]);
 			if (ret_val >= 0)
 				return (!ret_val);
-		} else {
+		} else if (lookup_op(argv[2], andor_op) < 0) {
 			ret_val = posix_binary_op(&argv[1]);
 			if (ret_val >= 0)
 				return (ret_val);
@@ -341,12 +341,12 @@ end_final (filename)

      ASM_OUTPUT_ALIGN (asm_out_file, align);

-      fprintf(asm_out_file,".stabs \"bbset\", 25, 0, 0, LPBX0\n");
-
      ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 0);
      /* zero word */
      assemble_integer (const0_rtx, UNITS_PER_WORD, 1);

+      fprintf(asm_out_file,".stabs \"bbset\", 25, 0, 0, LPBX0\n");
+
      /* address of filename */
      ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 1);
      assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), UNITS_PER_WORD, 1);
@@ -0,0 +1,50 @@
+		   README for GNU development tools
+
+This directory contains various GNU compilers, assemblers, linkers, 
+debuggers, etc., plus their support routines, definitions, and documentation.
+
+If you are receiving this as part of a GDB release, see the file gdb/README.
+If with a gas release, see gas/README;  if with a libg++ release,
+see libg++/README, etc.  That'll give you info about this
+package -- supported targets, how to use it, how to report bugs, etc.
+
+It is now possible to automatically configure and build a variety of
+tools with one command.  To build all of the tools contained herein,
+run the ``configure'' script here, e.g.:
+
+	./configure 
+	make
+
+To install them (by default in /usr/local/bin, /usr/local/lib, etc),
+then do:
+	make install
+
+If the configure script can't determine your type of computer, give it
+the name as an argument, for instance ``./configure sun4''.  You can
+use the script ``config.sub'' to test whether a name is recognized; if
+it is, config.sub translates it to a triplet specifying CPU, vendor,
+and OS.)
+
+If you have more than one compiler on your system, it is often best to
+explicitly set CC in the environment before running configure, and to
+also set CC when running make.  For example (assuming sh/bash/ksh):
+
+	CC=gcc ./configure
+	make CC=gcc
+
+A similar example using csh:
+
+	setenv CC gcc
+	./configure
+	make CC=gcc
+
+See etc/cfg-paper.texi, etc/configure.texi, and/or the README files in
+various subdirectories, for more details.
+
+Much of the code and documentation enclosed is copyright by
+the Free Software Foundation, Inc.  See the file COPYING or
+COPYING.LIB in the various directories, for a description of the
+GNU General Public License terms under which you can copy the files.
+
+REPORTING BUGS: Again, see gdb/README, gas/README, etc., for info on where and
+how to report problems.
@@ -0,0 +1,83 @@
+	Preliminary Notes on Porting BFD
+	--------------------------------
+
+The 'host' is the system a tool runs *on*.
+The 'target' is the system a tool runs *for*, i.e.
+a tool can read/write the binaries of the target.
+
+Porting to a new host
+---------------------
+Pick a name for your host. Call that <host>.
+(<host> might be sun4, ...)
+Create a file hosts/<host>.mh.
+
+Porting to a new target
+-----------------------
+Pick a name for your target. Call that <target>.
+Call the name for your CPU architecture <cpu>.
+You need to create <target>.c and config/<target>.mt,
+and add a case for it to a case statements in bfd/configure.host and
+bfd/config.bfd, which associates each canonical host type with a BFD
+host type (used as the base of the makefile fragment names), and to the
+table in bfd/configure.in which associates each target vector with
+the .o files it uses.
+
+config/<target>.mt is a Makefile fragment.
+The following is usually enough:
+DEFAULT_VECTOR=<target>_vec
+SELECT_ARCHITECTURES=bfd_<cpu>_arch
+
+See the list of cpu types in archures.c, or "ls cpu-*.c".
+If your architecture is new, you need to add it to the tables
+in bfd/archures.c, opcodes/configure.in, and binutils/objdump.c.
+
+For more information about .mt and .mh files, see config/README.
+
+The file <target>.c is the hard part.  It implements the
+bfd_target <target>_vec, which includes pointers to
+functions that do the actual <target>-specific methods.
+
+Porting to a <target> that uses the a.out binary format
+-------------------------------------------------------
+
+In this case, the include file aout-target.h probaby does most
+of what you need. The program gen-aout generates <target>.c for
+you automatically for many a.out systems.  Do:
+	make gen-aout
+	./gen-aout <target> > <target>.c
+(This only works if you are building on the target ("native").
+If you must make a cross-port from scratch, copy the most
+similar existing file that includes aout-target.h, and fix what is wrong.)
+
+Check the parameters in <target>.c, and fix anything that is wrong.
+(Also let us know about it; perhaps we can improve gen-aout.c.)
+
+TARGET_IS_BIG_ENDIAN_P
+	Should be defined if <target> is big-endian.
+
+N_HEADER_IN_TEXT(x)
+	See discussion in ../include/aout/aout64.h.
+
+BYTES_IN_WORD
+	Number of bytes per word. (Usually 4 but can be 8.)
+
+ARCH
+	Number of bits per word.  (Usually 32, but can be 64.)
+
+ENTRY_CAN_BE_ZERO
+	Define if the extry point (start address of an
+	executable program) can be 0x0.
+
+TEXT_START_ADDR
+	The address of the start of the text segemnt in
+	virtual memory.  Normally, the same as the entry point.
+
+TARGET_PAGE_SIZE
+
+SEGMENT_SIZE
+        Usually, the same as the TARGET_PAGE_SIZE.
+        Alignment needed for the data segment.
+
+TARGETNAME
+	The name of the target, for run-time lookups.
+	Usually "a.out-<target>"
@@ -0,0 +1,25 @@
+Things that still need to be done: -*- Text -*-
+
+ o - A source of space lossage is that all the target-dependent code
+     is in a single bfd_target structure.  Hence all the code for
+     *writing* object files is still pulled into all the applications
+     that only care about *reading* (gdb, nm, objdump), while gas has
+     to carry along all the unneded baggage for reading objects.  And
+     so on.  This would be a substantial change, and the payoff would
+     not all that great (essentially none if bfd is used as a shared
+     library).
+
+ o - The storage needed by BFD data structures is also larger than strictly
+     needed.  This may be difficult to do much about.
+
+ o - implement bfd_abort, which should close the bfd but not alter the
+     filesystem.
+
+ o - update the bfd doc; write a how-to-write-a-backend doc, take out
+     the stupid quips and fill in all the blanks.
+
+ o - upgrade the reloc handling as per Steve's suggestion.
+
+
+
+
@@ -0,0 +1 @@
+cygnus-2.6
@@ -0,0 +1,19 @@
+
+/* Whether malloc must be declared even if <stdlib.h> is included.  */
+#undef NEED_DECLARATION_MALLOC
+
+/* Whether free must be declared even if <stdlib.h> is included.  */
+#undef NEED_DECLARATION_FREE
+@TOP@
+
+/* Do we need to use the b modifier when opening binary files?  */
+#undef USE_BINARY_FOPEN
+
+/* Name of host specific header file to include in trad-core.c.  */
+#undef TRAD_HEADER
+
+/* Define only if <sys/procfs.h> is available *and* it defines prstatus_t.  */
+#undef HAVE_SYS_PROCFS_H
+
+/* Do we really want to use mmap if it's available?  */
+#undef USE_MMAP
@@ -0,0 +1,43 @@
+dnl See whether we need to use fopen-bin.h rather than fopen-same.h.
+AC_DEFUN(BFD_BINARY_FOPEN,
+[AC_REQUIRE([AC_CANONICAL_SYSTEM])
+case "${host}" in
+changequote(,)dnl
+i[345]86-*-msdos* | i[345]86-*-go32* | *-*-cygwin32)
+changequote([,])dnl
+  AC_DEFINE(USE_BINARY_FOPEN) ;;
+esac])dnl
+
+dnl Get a default for CC_FOR_BUILD to put into Makefile.
+AC_DEFUN(BFD_CC_FOR_BUILD,
+[# Put a plausible default for CC_FOR_BUILD in Makefile.
+AC_REQUIRE([AC_C_CROSS])dnl
+if test -z "$CC_FOR_BUILD"; then
+  if test "x$cross_compiling" = "xno"; then
+    CC_FOR_BUILD='$(CC)'
+  else
+    CC_FOR_BUILD=gcc
+  fi
+fi
+AC_SUBST(CC_FOR_BUILD)])dnl
+
+dnl See whether we need a declaration for a function.
+AC_DEFUN(BFD_NEED_DECLARATION,
+[AC_MSG_CHECKING([whether $1 must be declared])
+AC_CACHE_VAL(bfd_cv_decl_needed_$1,
+[AC_TRY_COMPILE([
+#include <stdio.h>
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif],
+[char *(*pfn) = (char *(*)) $1],
+bfd_cv_decl_needed_$1=no, bfd_cv_decl_needed_$1=yes)])
+AC_MSG_RESULT($bfd_cv_decl_needed_$1)
+if test $bfd_cv_decl_needed_$1 = yes; then
+  bfd_tr_decl=NEED_DECLARATION_`echo $1 | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  AC_DEFINE_UNQUOTED($bfd_tr_decl)
+fi
+])dnl
@@ -0,0 +1,285 @@
+/* BFD back-end for AIX on PS/2 core files.
+   This was based on trad-core.c, which was written by John Gilmore of
+        Cygnus Support.
+   Copyright 1988, 1989, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+   Written by Minh Tran-Le <TRANLE@INTELLICORP.COM>.
+   Converted to back end form by Ian Lance Taylor <ian@cygnus.com>.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+#include "coff/i386.h"
+#include "coff/internal.h"
+#include "libcoff.h"
+
+#include <stdio.h>
+#include <stddef.h>
+#include <signal.h>
+
+#include <errno.h>
+
+#if defined (_AIX) && defined (_I386)
+#define NOCHECKS		/* this is for coredump.h */
+#define _h_USER			/* avoid including user.h from coredump.h */
+#include <uinfo.h>
+#include <sys/i386/coredump.h>
+#endif /* _AIX && _I386 */
+
+/* maybe this could work on some other i386 but I have not tried it
+ * mtranle@paris - Tue Sep 24 12:49:35 1991
+ */
+
+#ifndef COR_MAGIC
+# define COR_MAGIC "core"
+#endif
+
+/* need this cast because ptr is really void * */
+#define core_hdr(bfd) \
+    (((bfd->tdata.trad_core_data))->hdr)
+#define core_section(bfd,n) \
+    (((bfd)->tdata.trad_core_data)->sections[n])
+#define core_regsec(bfd) \
+    (((bfd)->tdata.trad_core_data)->reg_section)
+#define core_reg2sec(bfd) \
+    (((bfd)->tdata.trad_core_data)->reg2_section)
+
+/* These are stored in the bfd's tdata */
+struct trad_core_struct {
+  struct corehdr *hdr;		/* core file header */
+  asection *reg_section;
+  asection *reg2_section;
+  asection *sections[MAX_CORE_SEGS];
+};
+
+static const bfd_target *
+aix386_core_file_p (abfd)
+     bfd *abfd;
+{
+  int i,n;
+  unsigned char longbuf[4];	/* Raw bytes of various header fields */
+  int core_size = sizeof (struct corehdr);
+  struct corehdr *core;
+  struct mergem {
+    struct trad_core_struct coredata;
+    struct corehdr internal_core;
+  } *mergem;
+
+  if (bfd_read ((PTR)longbuf, 1, sizeof (longbuf), abfd) != sizeof (longbuf))
+    {
+      if (bfd_get_error () != bfd_error_system_call)
+	bfd_set_error (bfd_error_wrong_format);
+      return 0;
+    }
+
+  if (strncmp(longbuf,COR_MAGIC,4)) return 0;
+
+  if (bfd_seek (abfd, 0L, false) < 0) return 0;
+
+  mergem = (struct mergem *)bfd_zalloc (abfd, sizeof (struct mergem));
+  if (mergem == NULL)
+    return 0;
+
+  core = &mergem->internal_core;
+
+  if ((bfd_read ((PTR) core, 1, core_size, abfd)) != core_size)
+    {
+      if (bfd_get_error () != bfd_error_system_call)
+	bfd_set_error (bfd_error_wrong_format);
+      bfd_release (abfd, (char *)mergem);
+      return 0;
+    }
+
+  set_tdata (abfd, &mergem->coredata);
+  core_hdr (abfd) = core;
+
+  /* create the sections.  This is raunchy, but bfd_close wants to reclaim
+     them */
+  core_regsec (abfd) = (asection *) bfd_zalloc (abfd, sizeof (asection));
+  if (core_regsec (abfd) == NULL)
+    {
+    loser:
+      bfd_release (abfd, (char *)mergem);
+      return 0;
+    }
+  core_reg2sec (abfd) = (asection *) bfd_zalloc (abfd, sizeof (asection));
+  if (core_reg2sec (abfd) == NULL)
+    {
+    loser1:
+     bfd_release (abfd, core_regsec (abfd));
+      goto loser;
+    }
+
+  for (i=0, n=0 ; (i < MAX_CORE_SEGS) && (core->cd_segs[i].cs_type) ; i++)
+    {
+      if (core->cd_segs[i].cs_offset == 0)
+	continue;
+      core_section (abfd,n) =
+	(asection *) bfd_zalloc (abfd, sizeof (asection));
+      if (core_section (abfd,n) == NULL)
+	{
+	  int j;
+	  if (n > 0)
+	    {
+	      for (j=0; j < n; j++)
+		bfd_release (abfd, core_section(abfd, j));
+	    }
+	  bfd_release (abfd, (char *)mergem);
+	  goto loser1;
+	}
+
+      switch (core->cd_segs[i].cs_type)
+	{
+	case COR_TYPE_DATA:
+	  core_section (abfd, n)->name = ".data";
+	  core_section (abfd, n)->flags = (SEC_ALLOC + SEC_LOAD +
+					   SEC_HAS_CONTENTS);
+	  break;
+	case COR_TYPE_STACK:
+	  core_section (abfd, n)->name = ".stack";
+	  core_section (abfd, n)->flags = (SEC_ALLOC + SEC_LOAD +
+					   SEC_HAS_CONTENTS);
+	  break;
+	case COR_TYPE_LIBDATA:
+	  core_section (abfd, n)->name = ".libdata";
+	  core_section (abfd, n)->flags = (SEC_ALLOC + SEC_HAS_CONTENTS);
+	  break;
+	case COR_TYPE_WRITE:
+	  core_section (abfd, n)->name = ".writeable";
+	  core_section (abfd, n)->flags = (SEC_ALLOC + SEC_HAS_CONTENTS);
+	  break;
+	case COR_TYPE_MSC:
+	  core_section (abfd, n)->name = ".misc";
+	  core_section (abfd, n)->flags = (SEC_ALLOC + SEC_HAS_CONTENTS);
+	  break;
+	default:
+	  core_section (abfd, n)->name = ".unknown";
+	  core_section (abfd, n)->flags = (SEC_ALLOC + SEC_HAS_CONTENTS);
+	  break;
+	}
+      core_section (abfd, n)->_raw_size = core->cd_segs[i].cs_len;
+      core_section (abfd, n)->vma       = core->cd_segs[i].cs_address;
+      core_section (abfd, n)->filepos   = core->cd_segs[i].cs_offset;
+      core_section (abfd, n)->alignment_power = 2;
+      core_section (abfd, n)->next      = NULL;
+      if (n > 0)
+	core_section (abfd, (n-1))->next = core_section (abfd, n);
+
+      abfd->section_count = ++n;
+    }
+
+  core_regsec (abfd)->name = ".reg";
+  core_reg2sec (abfd)->name = ".reg2";
+
+  core_regsec (abfd)->flags = SEC_HAS_CONTENTS;
+  core_reg2sec (abfd)->flags = SEC_HAS_CONTENTS;
+
+  core_regsec (abfd)->_raw_size = sizeof(core->cd_regs);
+  core_reg2sec (abfd)->_raw_size = sizeof(core->cd_fpregs);
+
+  core_regsec (abfd)->vma = -1;
+  core_reg2sec (abfd)->vma = -1;
+
+  /* We'll access the regs afresh in the core file, like any section: */
+  core_regsec (abfd)->filepos = (file_ptr)offsetof(struct corehdr,cd_regs[0]);
+  core_reg2sec (abfd)->filepos = (file_ptr)offsetof(struct corehdr,
+						    cd_fpregs);
+
+  /* add the 2 reg fake sections to abfd */
+  abfd->section_count += 2;
+  abfd->sections = core_regsec (abfd);
+  core_regsec (abfd)->next = core_reg2sec (abfd);
+  core_reg2sec (abfd)->next = core_section (abfd, 0);
+
+  return abfd->xvec;
+}
+
+static char *
+aix386_core_file_failing_command (abfd)
+     bfd *abfd;
+{
+  return core_hdr (abfd)->cd_comm;
+}
+
+static int
+aix386_core_file_failing_signal (abfd)
+     bfd *abfd;
+{
+  return core_hdr (abfd)->cd_cursig;
+}
+
+static boolean
+aix386_core_file_matches_executable_p (core_bfd, exec_bfd)
+     bfd *core_bfd;
+     bfd *exec_bfd;
+{
+  return true;			/* FIXME, We have no way of telling at this
+				   point */
+}
+
+/* If somebody calls any byte-swapping routines, shoot them.  */
+void
+swap_abort()
+{
+  abort(); /* This way doesn't require any declaration for ANSI to fuck up */
+}
+#define	NO_GET	((PROTO(bfd_vma, (*), (       const bfd_byte *))) swap_abort )
+#define NO_GETS ((PROTO(bfd_signed_vma, (*), (const bfd_byte *))) swap_abort )
+#define	NO_PUT	((PROTO(void,        (*), (bfd_vma, bfd_byte *))) swap_abort )
+
+const bfd_target aix386_core_vec =
+  {
+    "aix386-core",
+    bfd_target_unknown_flavour,
+    BFD_ENDIAN_BIG,		/* target byte order */
+    BFD_ENDIANG_BIG,		/* target headers byte order */
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+    0,						/* leading underscore */
+    ' ',					/* ar_pad_char */
+    16,						/* ar_max_namelen */
+    NO_GET, NO_GETS, NO_PUT,
+    NO_GET, NO_GETS, NO_PUT,
+    NO_GET, NO_GETS, NO_PUT, /* data */
+    NO_GET, NO_GETS, NO_PUT,
+    NO_GET, NO_GETS, NO_PUT,
+    NO_GET, NO_GETS, NO_PUT, /* hdrs */
+
+    {_bfd_dummy_target, _bfd_dummy_target,
+     _bfd_dummy_target, aix386_core_file_p},
+    {bfd_false, bfd_false,	/* bfd_create_object */
+     bfd_false, bfd_false},
+    {bfd_false, bfd_false,	/* bfd_write_contents */
+     bfd_false, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (_bfd_generic),
+     BFD_JUMP_TABLE_COPY (_bfd_generic),
+     BFD_JUMP_TABLE_CORE (aix386),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_noarchive),
+     BFD_JUMP_TABLE_SYMBOLS (_bfd_nosymbols),
+     BFD_JUMP_TABLE_RELOCS (_bfd_norelocs),
+     BFD_JUMP_TABLE_WRITE (_bfd_generic),
+     BFD_JUMP_TABLE_LINK (_bfd_nolink),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+    (PTR) 0
+};
@@ -0,0 +1,528 @@
+/* BFD back-end for a.out.adobe binaries.
+   Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+   Written by Cygnus Support.  Based on bout.c.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+
+#include "aout/adobe.h"
+
+#include "aout/stab_gnu.h"
+#include "libaout.h"		/* BFD a.out internal data structures */
+
+extern const bfd_target a_out_adobe_vec;		/* Forward decl */
+
+static const bfd_target *aout_adobe_callback PARAMS ((bfd *));
+
+extern boolean aout_32_slurp_symbol_table PARAMS ((bfd *abfd));
+extern boolean aout_32_write_syms PARAMS ((bfd *));
+static void aout_adobe_write_section PARAMS ((bfd *abfd, sec_ptr sect));
+
+/* Swaps the information in an executable header taken from a raw byte
+   stream memory image, into the internal exec_header structure.  */
+
+void aout_adobe_swap_exec_header_in
+  PARAMS ((bfd *abfd, struct external_exec *raw_bytes,
+	   struct internal_exec *execp));
+	 
+void
+aout_adobe_swap_exec_header_in (abfd, raw_bytes, execp)
+     bfd *abfd;
+     struct external_exec *raw_bytes;
+     struct internal_exec *execp;
+{
+  struct external_exec *bytes = (struct external_exec *)raw_bytes;
+
+  /* Now fill in fields in the execp, from the bytes in the raw data.  */
+  execp->a_info   = bfd_h_get_32 (abfd, bytes->e_info);
+  execp->a_text   = GET_WORD (abfd, bytes->e_text);
+  execp->a_data   = GET_WORD (abfd, bytes->e_data);
+  execp->a_bss    = GET_WORD (abfd, bytes->e_bss);
+  execp->a_syms   = GET_WORD (abfd, bytes->e_syms);
+  execp->a_entry  = GET_WORD (abfd, bytes->e_entry);
+  execp->a_trsize = GET_WORD (abfd, bytes->e_trsize);
+  execp->a_drsize = GET_WORD (abfd, bytes->e_drsize);
+}
+
+/* Swaps the information in an internal exec header structure into the
+   supplied buffer ready for writing to disk.  */
+
+PROTO(void, aout_adobe_swap_exec_header_out,
+	  (bfd *abfd,
+	   struct internal_exec *execp,
+	   struct external_exec *raw_bytes));
+void
+aout_adobe_swap_exec_header_out (abfd, execp, raw_bytes)
+     bfd *abfd;
+     struct internal_exec *execp;
+     struct external_exec *raw_bytes;
+{
+  struct external_exec *bytes = (struct external_exec *)raw_bytes;
+
+  /* Now fill in fields in the raw data, from the fields in the exec struct. */
+  bfd_h_put_32 (abfd, execp->a_info  , bytes->e_info);
+  PUT_WORD (abfd, execp->a_text  , bytes->e_text);
+  PUT_WORD (abfd, execp->a_data  , bytes->e_data);
+  PUT_WORD (abfd, execp->a_bss   , bytes->e_bss);
+  PUT_WORD (abfd, execp->a_syms  , bytes->e_syms);
+  PUT_WORD (abfd, execp->a_entry , bytes->e_entry);
+  PUT_WORD (abfd, execp->a_trsize, bytes->e_trsize);
+  PUT_WORD (abfd, execp->a_drsize, bytes->e_drsize);
+}
+
+
+static const bfd_target *
+aout_adobe_object_p (abfd)
+     bfd *abfd;
+{
+  struct internal_exec anexec;
+  struct external_exec exec_bytes;
+  char *targ;
+
+  if (bfd_read ((PTR) &exec_bytes, 1, EXEC_BYTES_SIZE, abfd)
+      != EXEC_BYTES_SIZE) {
+    if (bfd_get_error () != bfd_error_system_call)
+      bfd_set_error (bfd_error_wrong_format);
+    return 0;
+  }
+
+  anexec.a_info = bfd_h_get_32 (abfd, exec_bytes.e_info);
+
+  /* Normally we just compare for the magic number.
+     However, a bunch of Adobe tools aren't fixed up yet; they generate
+     files using ZMAGIC(!).
+     If the environment variable GNUTARGET is set to "a.out.adobe", we will
+     take just about any a.out file as an Adobe a.out file.  FIXME!  */
+
+  if (N_BADMAG (anexec)) {
+    extern char *getenv ();
+
+    targ = getenv ("GNUTARGET");
+    if (targ && !strcmp (targ, a_out_adobe_vec.name))
+      ;		/* Just continue anyway, if specifically set to this format */
+    else
+      {
+	bfd_set_error (bfd_error_wrong_format);
+	return 0;
+      }
+  }
+
+  aout_adobe_swap_exec_header_in (abfd, &exec_bytes, &anexec);
+  return aout_32_some_aout_object_p (abfd, &anexec, aout_adobe_callback);
+}
+
+
+/* Finish up the opening of a b.out file for reading.  Fill in all the
+   fields that are not handled by common code.  */
+
+static const bfd_target *
+aout_adobe_callback (abfd)
+     bfd *abfd;
+{
+  struct internal_exec *execp = exec_hdr (abfd);
+  asection *sect;
+  struct external_segdesc ext[1];
+  char *section_name;
+  char try_again[30];	/* name and number */
+  char *newname;
+  int trynum;
+  flagword flags;
+
+  /* Architecture and machine type -- unknown in this format.  */
+  bfd_set_arch_mach(abfd, bfd_arch_unknown, 0);
+
+  /* The positions of the string table and symbol table.  */
+  obj_str_filepos (abfd) = N_STROFF (*execp);
+  obj_sym_filepos (abfd) = N_SYMOFF (*execp);
+
+  /* Suck up the section information from the file, one section at a time.  */
+
+  for (;;) {
+    if (bfd_read ((PTR) ext, 1, sizeof (*ext), abfd) != sizeof (*ext)) {
+      if (bfd_get_error () != bfd_error_system_call)
+	bfd_set_error (bfd_error_wrong_format);
+      return 0;
+    }
+    switch (ext->e_type[0]) {
+    case N_TEXT:
+      section_name = ".text";
+      flags = SEC_CODE | SEC_LOAD | SEC_ALLOC | SEC_HAS_CONTENTS;
+      break;
+
+    case N_DATA:
+      section_name = ".data";
+      flags = SEC_DATA | SEC_LOAD | SEC_ALLOC | SEC_HAS_CONTENTS;
+      break;
+
+    case N_BSS:
+      section_name = ".bss";
+      flags = SEC_DATA | SEC_HAS_CONTENTS;
+      break;
+
+    case 0:
+      goto no_more_sections;
+
+    default:
+      (*_bfd_error_handler)
+	("%s: Unknown section type in a.out.adobe file: %x\n", 
+	 bfd_get_filename (abfd), ext->e_type[0]);
+      goto no_more_sections;
+    }
+
+    /* First one is called ".text" or whatever; subsequent ones are
+       ".text1", ".text2", ... */
+
+    bfd_set_error (bfd_error_no_error);
+    sect = bfd_make_section (abfd, section_name);
+    trynum = 0;
+    while (!sect) {
+      if (bfd_get_error () != bfd_error_no_error)
+	return 0;	/* Some other error -- slide into the sunset */
+      sprintf (try_again, "%s%d", section_name, ++trynum);
+      sect = bfd_make_section (abfd, try_again);
+    }
+
+    /* Fix the name, if it is a sprintf'd name.  */
+    if (sect->name == try_again) {
+      newname = (char *) bfd_zalloc(abfd, strlen (sect->name));
+      if (newname == NULL)
+	return 0;
+      strcpy (newname, sect->name);
+      sect->name = newname;
+    }
+
+    /* Now set the section's attributes.  */
+    bfd_set_section_flags (abfd, sect, flags);
+    sect->_raw_size = ((ext->e_size[0] << 8)	/* Assumed big-endian */
+		      | ext->e_size[1] << 8)
+		      | ext->e_size[2];
+    sect->_cooked_size = sect->_raw_size;
+    sect->vma = bfd_h_get_32 (abfd, ext->e_virtbase);
+    sect->filepos = bfd_h_get_32 (abfd, ext->e_filebase);
+    /* FIXME XXX alignment? */
+
+    /* Set relocation information for first section of each type.  */
+    if (trynum == 0) switch (ext->e_type[0]) {
+    case N_TEXT:
+      sect->rel_filepos = N_TRELOFF (*execp);
+      sect->reloc_count = execp->a_trsize;
+      break;
+
+    case N_DATA:
+      sect->rel_filepos = N_DRELOFF (*execp);
+      sect->reloc_count = execp->a_drsize;
+      break;
+    }
+  }
+no_more_sections:  
+
+  adata(abfd).reloc_entry_size = sizeof (struct reloc_std_external);
+  adata(abfd).symbol_entry_size = sizeof (struct external_nlist);
+  adata(abfd).page_size = 1; /* Not applicable. */
+  adata(abfd).segment_size = 1; /* Not applicable. */
+  adata(abfd).exec_bytes_size = EXEC_BYTES_SIZE;
+
+  return abfd->xvec;
+}
+
+struct bout_data_struct {
+    struct aoutdata a;
+    struct internal_exec e;
+};
+
+static boolean
+aout_adobe_mkobject (abfd)
+     bfd *abfd;
+{
+  struct bout_data_struct *rawptr;
+
+  rawptr = (struct bout_data_struct *) bfd_zalloc (abfd, sizeof (struct bout_data_struct));
+  if (rawptr == NULL)
+      return false;
+
+  abfd->tdata.bout_data = rawptr;
+  exec_hdr (abfd) = &rawptr->e;
+
+  adata(abfd).reloc_entry_size = sizeof (struct reloc_std_external);
+  adata(abfd).symbol_entry_size = sizeof (struct external_nlist);
+  adata(abfd).page_size = 1; /* Not applicable. */
+  adata(abfd).segment_size = 1; /* Not applicable. */
+  adata(abfd).exec_bytes_size = EXEC_BYTES_SIZE;
+
+  return true;
+}
+
+
+static boolean
+aout_adobe_write_object_contents (abfd)
+     bfd *abfd;
+{
+  struct external_exec swapped_hdr;
+  static struct external_segdesc sentinel[1];	/* Initialized to zero */
+  asection *sect;
+
+  exec_hdr (abfd)->a_info = ZMAGIC;
+
+  /* Calculate text size as total of text sections, etc. */
+
+  exec_hdr (abfd)->a_text = 0;
+  exec_hdr (abfd)->a_data = 0;
+  exec_hdr (abfd)->a_bss  = 0;
+  exec_hdr (abfd)->a_trsize = 0;
+  exec_hdr (abfd)->a_drsize = 0;
+
+  for (sect = abfd->sections; sect; sect = sect->next) {
+    if (sect->flags & SEC_CODE)	{
+      exec_hdr (abfd)->a_text += sect->_raw_size;
+      exec_hdr (abfd)->a_trsize += sect->reloc_count *
+                                   sizeof (struct reloc_std_external);
+    } else if (sect->flags & SEC_DATA)	{
+      exec_hdr (abfd)->a_data += sect->_raw_size;
+      exec_hdr (abfd)->a_drsize += sect->reloc_count *
+                                   sizeof (struct reloc_std_external);
+    } else if (sect->flags & SEC_ALLOC && !(sect->flags & SEC_LOAD)) {
+      exec_hdr (abfd)->a_bss  += sect->_raw_size;
+    }
+  }
+
+  exec_hdr (abfd)->a_syms = bfd_get_symcount (abfd)
+    				* sizeof (struct external_nlist);
+  exec_hdr (abfd)->a_entry = bfd_get_start_address (abfd);
+
+  aout_adobe_swap_exec_header_out (abfd, exec_hdr (abfd), &swapped_hdr);
+
+  if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0
+      || (bfd_write ((PTR) &swapped_hdr, 1, EXEC_BYTES_SIZE, abfd)
+	  != EXEC_BYTES_SIZE))
+    return false;
+
+  /* Now write out the section information.  Text first, data next, rest
+     afterward.  */
+
+  for (sect = abfd->sections; sect; sect = sect->next) {
+    if (sect->flags & SEC_CODE)	{
+      aout_adobe_write_section (abfd, sect);
+    }
+  }
+  for (sect = abfd->sections; sect; sect = sect->next) {
+    if (sect->flags & SEC_DATA)	{
+      aout_adobe_write_section (abfd, sect);
+    }
+  }
+  for (sect = abfd->sections; sect; sect = sect->next) {
+    if (!(sect->flags & (SEC_CODE|SEC_DATA))) {
+      aout_adobe_write_section (abfd, sect);
+    }
+  }
+
+  /* Write final `sentinel` section header (with type of 0).  */
+  if (bfd_write ((PTR) sentinel, 1, sizeof (*sentinel), abfd)
+      != sizeof (*sentinel))
+    return false;
+
+  /* Now write out reloc info, followed by syms and strings */
+  if (bfd_get_symcount (abfd) != 0) 
+    {
+      if (bfd_seek (abfd, (file_ptr)(N_SYMOFF(*exec_hdr(abfd))), SEEK_SET)
+	  != 0)
+	return false;
+
+      if (! aout_32_write_syms (abfd))
+	return false;
+
+      if (bfd_seek (abfd, (file_ptr)(N_TRELOFF(*exec_hdr(abfd))), SEEK_SET)
+	  != 0)
+	return false;
+
+      for (sect = abfd->sections; sect; sect = sect->next) {
+        if (sect->flags & SEC_CODE)	{
+          if (!aout_32_squirt_out_relocs (abfd, sect))
+            return false;
+        }
+      }
+
+      if (bfd_seek (abfd, (file_ptr)(N_DRELOFF(*exec_hdr(abfd))), SEEK_SET)
+	  != 0)
+	return false;
+
+      for (sect = abfd->sections; sect; sect = sect->next) {
+        if (sect->flags & SEC_DATA)	{
+          if (!aout_32_squirt_out_relocs (abfd, sect))
+            return false;
+        }
+      }
+    }
+  return true;
+}
+
+static void
+aout_adobe_write_section (abfd, sect)
+     bfd *abfd;
+     sec_ptr sect;
+{
+  /* FIXME XXX */
+}
+
+static boolean
+aout_adobe_set_section_contents (abfd, section, location, offset, count)
+     bfd *abfd;
+     asection *section;
+     PTR location;
+     file_ptr offset;
+     bfd_size_type count;
+{
+  file_ptr section_start;
+  sec_ptr sect;
+
+  if (abfd->output_has_begun == false) { /* set by bfd.c handler */
+
+    /* Assign file offsets to sections.  Text sections are first, and
+       are contiguous.  Then data sections.  Everything else at the end.  */
+
+    section_start = N_TXTOFF (ignore<-->me);
+
+    for (sect = abfd->sections; sect; sect = sect->next) {
+      if (sect->flags & SEC_CODE)	{
+        sect->filepos = section_start;
+	/* FIXME:  Round to alignment */
+	section_start += sect->_raw_size;
+      }
+    }
+
+    for (sect = abfd->sections; sect; sect = sect->next) {
+      if (sect->flags & SEC_DATA)	{
+        sect->filepos = section_start;
+	/* FIXME:  Round to alignment */
+	section_start += sect->_raw_size;
+      }
+    }
+
+    for (sect = abfd->sections; sect; sect = sect->next) {
+      if (sect->flags & SEC_HAS_CONTENTS &&
+	  !(sect->flags & (SEC_CODE|SEC_DATA)))	{
+        sect->filepos = section_start;
+	/* FIXME:  Round to alignment */
+	section_start += sect->_raw_size;
+      }
+    }
+  }
+
+  /* regardless, once we know what we're doing, we might as well get going */
+  if (bfd_seek (abfd, section->filepos + offset, SEEK_SET) != 0)
+    return false;
+
+  if (count != 0) {
+    return (bfd_write ((PTR)location, 1, count, abfd) == count) ?true:false;
+  }
+  return true;
+}
+
+static boolean
+aout_adobe_set_arch_mach (abfd, arch, machine)
+     bfd *abfd;
+     enum bfd_architecture arch;
+     unsigned long machine;
+{
+  if (! bfd_default_set_arch_mach (abfd, arch, machine))
+    return false;
+
+  if (arch == bfd_arch_unknown
+      || arch == bfd_arch_m68k)
+    return true;
+
+  return false;
+}
+
+static int 
+aout_adobe_sizeof_headers (ignore_abfd, ignore)
+     bfd *ignore_abfd;
+     boolean ignore;
+{
+  return sizeof(struct internal_exec);
+}
+
+
+
+
+/* Build the transfer vector for Adobe A.Out files.  */
+
+#define aout_32_close_and_cleanup aout_32_bfd_free_cached_info
+
+#define aout_32_bfd_make_debug_symbol \
+  ((asymbol *(*) PARAMS ((bfd *, void *, unsigned long))) bfd_nullvoidptr)
+
+#define aout_32_bfd_reloc_type_lookup \
+  ((reloc_howto_type *(*) \
+    PARAMS ((bfd *, bfd_reloc_code_real_type))) bfd_nullvoidptr)
+
+#define	aout_32_set_arch_mach		aout_adobe_set_arch_mach
+#define	aout_32_set_section_contents	aout_adobe_set_section_contents
+
+#define	aout_32_sizeof_headers		aout_adobe_sizeof_headers
+#define aout_32_bfd_get_relocated_section_contents \
+  bfd_generic_get_relocated_section_contents
+#define aout_32_get_section_contents_in_window _bfd_generic_get_section_contents_in_window
+#define aout_32_bfd_relax_section       bfd_generic_relax_section
+#define aout_32_bfd_link_hash_table_create \
+  _bfd_generic_link_hash_table_create
+#define aout_32_bfd_link_add_symbols	_bfd_generic_link_add_symbols
+#define aout_32_bfd_final_link		_bfd_generic_final_link
+#define aout_32_bfd_link_split_section	_bfd_generic_link_split_section
+
+const bfd_target a_out_adobe_vec =
+{
+  "a.out.adobe",		/* name */
+  bfd_target_aout_flavour,
+  BFD_ENDIAN_BIG,		/* data byte order is unknown (big assumed) */
+  BFD_ENDIAN_BIG,		/* hdr byte order is big */
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT ),
+  /* section flags */
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_CODE | SEC_DATA | SEC_RELOC),
+  '_',				/*  symbol leading char */
+  ' ',				/* ar_pad_char */
+  16,				/* ar_max_namelen */
+
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
+ {_bfd_dummy_target, aout_adobe_object_p, /* bfd_check_format */
+   bfd_generic_archive_p, _bfd_dummy_target},
+ {bfd_false, aout_adobe_mkobject, /* bfd_set_format */
+   _bfd_generic_mkarchive, bfd_false},
+ {bfd_false, aout_adobe_write_object_contents, /* bfd_write_contents */
+   _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (aout_32),
+     BFD_JUMP_TABLE_COPY (_bfd_generic),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_bsd),
+     BFD_JUMP_TABLE_SYMBOLS (aout_32),
+     BFD_JUMP_TABLE_RELOCS (aout_32),
+     BFD_JUMP_TABLE_WRITE (aout_32),
+     BFD_JUMP_TABLE_LINK (aout_32),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  (PTR) 0
+};
@@ -0,0 +1,548 @@
+/* BFD back-end for raw ARM a.out binaries.
+   Copyright (C) 1994, 1995 Free Software Foundation, Inc.
+   Contributed by Richard Earnshaw (rwe@pegasus.esprit.ec.org)
+   
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#define N_TXTADDR(x) \
+  ((N_MAGIC(x) == NMAGIC) ? 0x8000 : \
+   (N_MAGIC(x) != ZMAGIC) ? 0 : \
+   (N_SHARED_LIB(x)) ? ((x).a_entry & ~(TARGET_PAGE_SIZE - 1)) : \
+   TEXT_START_ADDR)
+
+#define TEXT_START_ADDR 0x8000
+#define TARGET_PAGE_SIZE 0x8000
+#define SEGMENT_SIZE TARGET_PAGE_SIZE
+#define DEFAULT_ARCH bfd_arch_arm
+
+#define MY(OP) CAT(aoutarm_,OP)
+#define N_BADMAG(x) ((((x).a_info & ~007200) != ZMAGIC) && \
+                     (((x).a_info & ~006000) != OMAGIC) && \
+                     ((x).a_info != NMAGIC))
+#define N_MAGIC(x) ((x).a_info & ~07200)
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "assert.h"
+
+#define MYARM(OP) CAT(aoutarm_,OP)
+reloc_howto_type 	*MYARM(bfd_reloc_type_lookup)
+				PARAMS((bfd *, bfd_reloc_code_real_type));
+static boolean 		MYARM(write_object_contents)	PARAMS((bfd *));
+
+/* Avoid multiple defininitions from aoutx if supporting standarad a.out 
+   as well as our own.  */
+#define NAME(x,y) CAT3(aoutarm,_32_,y)
+
+#define MY_bfd_reloc_type_lookup aoutarm_bfd_reloc_type_lookup
+
+#include "libaout.h"
+#include "aout/aout64.h"
+
+static bfd_reloc_status_type
+MY(fix_pcrel_26_done)	PARAMS ((bfd *, arelent *, asymbol *, PTR,
+				 asection *, bfd *, char **));
+
+static bfd_reloc_status_type
+MY(fix_pcrel_26)	 PARAMS ((bfd *, arelent *, asymbol *, PTR,
+				  asection *, bfd *, char **));
+static void MY(swap_std_reloc_in) PARAMS ((bfd *, struct reloc_std_external *,
+					   arelent *, asymbol **,
+					   bfd_size_type));
+void MY(swap_std_reloc_out) PARAMS ((bfd *, arelent *, 
+				     struct reloc_std_external *));
+
+reloc_howto_type MY(howto_table)[] =
+{
+  /* type rs size bsz pcrel bitpos ovrf sf name part_inpl readmask setmask
+     pcdone */
+  HOWTO (0, 0, 0, 8, false, 0, complain_overflow_bitfield, 0, "8", true,
+	 0x000000ff, 0x000000ff, false),
+  HOWTO (1, 0, 1, 16, false, 0, complain_overflow_bitfield, 0, "16", true,
+	 0x0000ffff, 0x0000ffff, false),
+  HOWTO (2, 0, 2, 32, false, 0, complain_overflow_bitfield, 0, "32", true,
+	 0xffffffff, 0xffffffff, false),
+  HOWTO (3, 2, 2, 26, true, 0, complain_overflow_signed, MY(fix_pcrel_26),
+	 "ARM26", true, 0x00ffffff, 0x00ffffff, true),
+  HOWTO (4, 0, 0, 8, true, 0, complain_overflow_signed, 0, "DISP8", true,
+	 0x000000ff, 0x000000ff, true),
+  HOWTO (5, 0, 1, 16, true, 0, complain_overflow_signed, 0, "DISP16", true,
+	 0x0000ffff, 0x0000ffff, true),
+  HOWTO (6, 0, 2, 32, true, 0, complain_overflow_signed, 0, "DISP32", true,
+	 0xffffffff, 0xffffffff, true),
+  HOWTO (7, 2, 2, 26, false, 0, complain_overflow_signed,
+	 MY(fix_pcrel_26_done), "ARM26D", true, 0x0, 0x0,
+	 false),
+  {-1},
+  HOWTO (9, 0, -1, 16, false, 0, complain_overflow_bitfield, 0, "NEG16", true,
+	 0x0000ffff, 0x0000ffff, false),
+  HOWTO (10, 0, -2, 32, false, 0, complain_overflow_bitfield, 0, "NEG32", true,
+	 0xffffffff, 0xffffffff, false)
+};
+
+#define RELOC_ARM_BITS_NEG_BIG      ((unsigned int) 0x08)
+#define RELOC_ARM_BITS_NEG_LITTLE   ((unsigned int) 0x10)
+
+reloc_howto_type *
+MY(reloc_howto)(abfd, rel, r_index, r_extern, r_pcrel)
+     bfd *abfd;
+     struct reloc_std_external *rel;
+     int *r_index;
+     int *r_extern;
+     int *r_pcrel;
+{
+  unsigned int r_length;
+  unsigned int r_pcrel_done;
+  unsigned int r_neg;
+  int index;
+
+  *r_pcrel = 0;
+  if (bfd_header_big_endian (abfd))
+    {
+      *r_index     =  ((rel->r_index[0] << 16)
+		       | (rel->r_index[1] << 8)
+		       | rel->r_index[2]);
+      *r_extern    = (0 != (rel->r_type[0] & RELOC_STD_BITS_EXTERN_BIG));
+      r_pcrel_done = (0 != (rel->r_type[0] & RELOC_STD_BITS_PCREL_BIG));
+      r_neg 	   = (0 != (rel->r_type[0] & RELOC_ARM_BITS_NEG_BIG));
+      r_length     = ((rel->r_type[0] & RELOC_STD_BITS_LENGTH_BIG)
+		      >> RELOC_STD_BITS_LENGTH_SH_BIG);
+    }
+  else
+    {
+      *r_index     = ((rel->r_index[2] << 16)
+		      | (rel->r_index[1] << 8)
+		      | rel->r_index[0]);
+      *r_extern    = (0 != (rel->r_type[0] & RELOC_STD_BITS_EXTERN_LITTLE));
+      r_pcrel_done = (0 != (rel->r_type[0] & RELOC_STD_BITS_PCREL_LITTLE));
+      r_neg 	   = (0 != (rel->r_type[0] & RELOC_ARM_BITS_NEG_LITTLE));
+      r_length     = ((rel->r_type[0] & RELOC_STD_BITS_LENGTH_LITTLE)
+		      >> RELOC_STD_BITS_LENGTH_SH_LITTLE);
+    }
+  index = r_length + 4 * r_pcrel_done + 8 * r_neg;
+  if (index == 3)
+    *r_pcrel = 1;
+
+  return MY(howto_table) + index;
+}
+ 
+#define MY_reloc_howto(BFD, REL, IN, EX, PC) \
+	MY(reloc_howto) (BFD, REL, &IN, &EX, &PC)
+
+void
+MY(put_reloc)(abfd, r_extern, r_index, value, howto, reloc)
+     bfd *abfd;
+     int r_extern;
+     int r_index;
+     long value;
+     reloc_howto_type *howto;
+     struct reloc_std_external *reloc;
+{
+  unsigned int r_length;
+  int r_pcrel;
+  int r_neg;
+
+  PUT_WORD (abfd, value, reloc->r_address);
+  r_length = howto->size ;	/* Size as a power of two */
+
+  /* Special case for branch relocations. */
+  if (howto->type == 3 || howto->type == 7)
+    r_length = 3;
+
+  r_pcrel  = howto->type & 4; 	/* PC Relative done? */
+  r_neg = howto->type & 8;	/* Negative relocation */
+  if (bfd_header_big_endian (abfd))
+    {
+      reloc->r_index[0] = r_index >> 16;
+      reloc->r_index[1] = r_index >> 8;
+      reloc->r_index[2] = r_index;
+      reloc->r_type[0] =
+	((r_extern ?     RELOC_STD_BITS_EXTERN_BIG : 0)
+	 | (r_pcrel ?    RELOC_STD_BITS_PCREL_BIG : 0)
+	 | (r_neg ?	 RELOC_ARM_BITS_NEG_BIG : 0)
+	 | (r_length <<  RELOC_STD_BITS_LENGTH_SH_BIG));
+    }
+  else
+    {
+      reloc->r_index[2] = r_index >> 16;
+      reloc->r_index[1] = r_index >> 8;
+      reloc->r_index[0] = r_index;
+      reloc->r_type[0] =
+	((r_extern ?     RELOC_STD_BITS_EXTERN_LITTLE : 0)
+	 | (r_pcrel ?    RELOC_STD_BITS_PCREL_LITTLE : 0)
+	 | (r_neg ?	 RELOC_ARM_BITS_NEG_LITTLE : 0)
+	 | (r_length <<  RELOC_STD_BITS_LENGTH_SH_LITTLE));
+    }
+}
+ 
+#define MY_put_reloc(BFD, EXT, IDX, VAL, HOWTO, RELOC) \
+  MY(put_reloc)(BFD, EXT, IDX, VAL, HOWTO, RELOC)
+
+void
+MY(relocatable_reloc)(howto, abfd, reloc, amount, r_addr)
+     reloc_howto_type *howto;
+     bfd *abfd;
+     struct reloc_std_external *reloc;
+     bfd_vma *amount;
+     bfd_vma r_addr;
+{
+  if (howto->type == 3)
+    {
+      if (reloc->r_type[0] 
+	  & (bfd_header_big_endian (abfd)
+	     ? RELOC_STD_BITS_EXTERN_BIG : RELOC_STD_BITS_EXTERN_LITTLE))
+	{
+	  /* The reloc is still external, so don't modify anything. */
+	  *amount = 0;
+	}
+      else
+	{
+	  *amount -= r_addr;
+	  /* Change the r_pcrel value -- on the ARM, this bit is set once the
+	     relocation is done.  */
+	  if (bfd_header_big_endian (abfd))
+	    reloc->r_type[0] |= RELOC_STD_BITS_PCREL_BIG;
+	  else
+	    reloc->r_type[0] |= RELOC_STD_BITS_PCREL_LITTLE;
+	}
+    }
+  else if (howto->type == 7)
+    *amount = 0;
+}
+
+#define MY_relocatable_reloc(HOW, BFD, REL, AMOUNT, ADDR) \
+  MY(relocatable_reloc)(HOW, BFD, REL, &(AMOUNT), ADDR)
+
+static bfd_reloc_status_type
+MY(fix_pcrel_26_done) (abfd, reloc_entry, symbol, data, input_section,
+		       output_bfd, error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  /* This is dead simple at present.  */
+  return bfd_reloc_ok;
+}
+
+static bfd_reloc_status_type
+MY(fix_pcrel_26) (abfd, reloc_entry, symbol, data, input_section,
+		  output_bfd, error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  bfd_vma relocation;
+  bfd_size_type addr = reloc_entry->address;
+  long target = bfd_get_32 (abfd, (bfd_byte *) data + addr);
+  bfd_reloc_status_type flag = bfd_reloc_ok;
+  
+  /* If this is an undefined symbol, return error */
+  if (symbol->section == &bfd_und_section
+      && (symbol->flags & BSF_WEAK) == 0)
+    return output_bfd ? bfd_reloc_ok : bfd_reloc_undefined;
+
+  /* If the sections are different, and we are doing a partial relocation,
+     just ignore it for now.  */
+  if (symbol->section->name != input_section->name
+      && output_bfd != (bfd *)NULL)
+    return bfd_reloc_ok;
+
+  relocation = (target & 0x00ffffff) << 2;
+  relocation = (relocation ^ 0x02000000) - 0x02000000; /* Sign extend */
+  relocation += symbol->value;
+  relocation += symbol->section->output_section->vma;
+  relocation += symbol->section->output_offset;
+  relocation += reloc_entry->addend;
+  relocation -= input_section->output_section->vma;
+  relocation -= input_section->output_offset;
+  relocation -= addr;
+  if (relocation & 3)
+    return bfd_reloc_overflow;
+
+  /* Check for overflow */
+  if (relocation & 0x02000000)
+    {
+      if ((relocation & ~0x03ffffff) != ~0x03ffffff)
+	flag = bfd_reloc_overflow;
+    }
+  else if (relocation & ~0x03ffffff)
+    flag = bfd_reloc_overflow;
+
+  target &= ~0x00ffffff;
+  target |= (relocation >> 2) & 0x00ffffff;
+  bfd_put_32 (abfd, target, (bfd_byte *) data + addr);
+
+  /* Now the ARM magic... Change the reloc type so that it is marked as done.
+     Strictly this is only necessary if we are doing a partial relocation.  */
+  reloc_entry->howto = &MY(howto_table)[7];
+  
+  return flag;
+}
+
+reloc_howto_type *
+MY(bfd_reloc_type_lookup)(abfd,code)
+     bfd *abfd;
+     bfd_reloc_code_real_type code;
+{
+#define ASTD(i,j)       case i: return &MY(howto_table)[j]
+  if (code == BFD_RELOC_CTOR)
+    switch (bfd_get_arch_info (abfd)->bits_per_address)
+      {
+      case 32:
+        code = BFD_RELOC_32;
+        break;
+      default: return (CONST struct reloc_howto_struct *) 0;
+      }
+
+  switch (code)
+    {
+      ASTD (BFD_RELOC_16, 1);
+      ASTD (BFD_RELOC_32, 2);
+      ASTD (BFD_RELOC_ARM_PCREL_BRANCH, 3);
+      ASTD (BFD_RELOC_8_PCREL, 4);
+      ASTD (BFD_RELOC_16_PCREL, 5);
+      ASTD (BFD_RELOC_32_PCREL, 6);
+    default: return (CONST struct reloc_howto_struct *) 0;
+    }
+}
+
+#define MY_swap_std_reloc_in MY(swap_std_reloc_in)
+#define MY_swap_std_reloc_out MY(swap_std_reloc_out)
+#define MY_get_section_contents _bfd_generic_get_section_contents
+/* #define MY_bfd_link_hash_table_create _bfd_generic_link_hash_table_create */
+/* #define MY_bfd_link_add_symbols _bfd_generic_link_add_symbols */
+/* #define MY_bfd_final_link _bfd_generic_final_link */
+
+#include "aoutx.h"
+
+static void
+MY_swap_std_reloc_in (abfd, bytes, cache_ptr, symbols, symcount)
+     bfd *abfd;
+     struct reloc_std_external *bytes;
+     arelent *cache_ptr;
+     asymbol **symbols;
+     bfd_size_type symcount;
+{
+  int r_index;
+  int r_extern;
+  unsigned int r_length;
+  int r_pcrel;
+  struct aoutdata *su = &(abfd->tdata.aout_data->a);
+
+  cache_ptr->address = bfd_h_get_32 (abfd, bytes->r_address);
+
+  cache_ptr->howto = MY_reloc_howto (abfd, bytes, r_index, r_extern, r_pcrel);
+
+  MOVE_ADDRESS (0);
+}
+
+void
+MY_swap_std_reloc_out (abfd, g, natptr)
+     bfd *abfd;
+     arelent *g;
+     struct reloc_std_external *natptr;
+{
+  int r_index;
+  asymbol *sym = *(g->sym_ptr_ptr);
+  int r_extern;
+  int r_length;
+  int r_pcrel;
+  int r_neg = 0;	/* Negative relocs use the BASEREL bit.  */
+  asection *output_section = sym->section->output_section;
+
+  PUT_WORD(abfd, g->address, natptr->r_address);
+
+  r_length = g->howto->size ;   /* Size as a power of two */
+  if (r_length < 0)
+    {
+      r_length = -r_length;
+      r_neg = 1;
+    }
+
+  r_pcrel  = (int) g->howto->pc_relative; /* Relative to PC? */
+
+  /* For RISC iX, in pc-relative relocs the r_pcrel bit means that the
+     relocation has been done already (Only for the 26-bit one I think)???!!!
+     */
+
+  if (g->howto->type == 3)
+    {
+      r_length = 3;
+      r_pcrel = 0;
+    }
+  else if (g->howto->type == 7)
+    { 
+      r_length = 3;
+      r_pcrel = 1;
+    }
+  
+
+#if 0
+  /* For a standard reloc, the addend is in the object file.  */
+  r_addend = g->addend + (*(g->sym_ptr_ptr))->section->output_section->vma;
+#endif
+
+  /* name was clobbered by aout_write_syms to be symbol index */
+
+  /* If this relocation is relative to a symbol then set the
+     r_index to the symbols index, and the r_extern bit.
+
+     Absolute symbols can come in in two ways, either as an offset
+     from the abs section, or as a symbol which has an abs value.
+     check for that here
+     */
+
+  if (bfd_is_com_section (output_section)
+      || output_section == &bfd_abs_section
+      || output_section == &bfd_und_section)
+    {
+      if (bfd_abs_section.symbol == sym)
+	{
+	  /* Whoops, looked like an abs symbol, but is really an offset
+	     from the abs section */
+	  r_index = 0;
+	  r_extern = 0;
+	}
+      else
+	{
+	  /* Fill in symbol */
+	  r_extern = 1;
+	  r_index = (*(g->sym_ptr_ptr))->KEEPIT;
+	}
+    }
+  else
+    {
+      /* Just an ordinary section */
+      r_extern = 0;
+      r_index  = output_section->target_index;
+    }
+
+  /* now the fun stuff */
+  if (bfd_header_big_endian (abfd))
+    {
+      natptr->r_index[0] = r_index >> 16;
+      natptr->r_index[1] = r_index >> 8;
+      natptr->r_index[2] = r_index;
+      natptr->r_type[0] =
+	(  (r_extern ?   RELOC_STD_BITS_EXTERN_BIG: 0)
+	 | (r_pcrel  ?   RELOC_STD_BITS_PCREL_BIG: 0)
+	 | (r_neg    ?   RELOC_ARM_BITS_NEG_BIG: 0)
+	 | (r_length <<  RELOC_STD_BITS_LENGTH_SH_BIG));
+    }
+  else
+    {
+      natptr->r_index[2] = r_index >> 16;
+      natptr->r_index[1] = r_index >> 8;
+      natptr->r_index[0] = r_index;
+      natptr->r_type[0] =
+	(  (r_extern ?   RELOC_STD_BITS_EXTERN_LITTLE: 0)
+	 | (r_pcrel  ?   RELOC_STD_BITS_PCREL_LITTLE: 0)
+	 | (r_neg    ?   RELOC_ARM_BITS_NEG_LITTLE: 0)
+	 | (r_length <<  RELOC_STD_BITS_LENGTH_SH_LITTLE));
+    }
+}
+
+#define MY_BFD_TARGET
+
+#include "aout-target.h"
+
+const bfd_target aout_arm_little_vec =
+{
+  "a.out-arm-little",           /* name */
+  bfd_target_aout_flavour,
+  BFD_ENDIAN_LITTLE,            /* target byte order (little) */
+  BFD_ENDIAN_LITTLE,            /* target headers byte order (little) */
+  (HAS_RELOC | EXEC_P |         /* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | DYNAMIC | WP_TEXT | D_PAGED),
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+  MY_symbol_leading_char,
+  AR_PAD_CHAR,                  /* ar_pad_char */
+  15,                           /* ar_max_namelen */
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
+    {_bfd_dummy_target, MY_object_p, /* bfd_check_format */
+       bfd_generic_archive_p, MY_core_file_p},
+    {bfd_false, MY_mkobject,    /* bfd_set_format */
+       _bfd_generic_mkarchive, bfd_false},
+    {bfd_false, MY_write_object_contents, /* bfd_write_contents */
+       _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (MY),
+     BFD_JUMP_TABLE_COPY (MY),
+     BFD_JUMP_TABLE_CORE (MY),
+     BFD_JUMP_TABLE_ARCHIVE (MY),
+     BFD_JUMP_TABLE_SYMBOLS (MY),
+     BFD_JUMP_TABLE_RELOCS (MY),
+     BFD_JUMP_TABLE_WRITE (MY),
+     BFD_JUMP_TABLE_LINK (MY),
+     BFD_JUMP_TABLE_DYNAMIC (MY),
+
+  (PTR) MY_backend_data,
+};
+
+const bfd_target aout_arm_big_vec =
+{
+  "a.out-arm-big",           /* name */
+  bfd_target_aout_flavour,
+  BFD_ENDIAN_BIG,               /* target byte order (big) */
+  BFD_ENDIAN_BIG,               /* target headers byte order (big) */
+  (HAS_RELOC | EXEC_P |         /* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | DYNAMIC | WP_TEXT | D_PAGED),
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+  MY_symbol_leading_char,
+  AR_PAD_CHAR,                  /* ar_pad_char */
+  15,                           /* ar_max_namelen */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
+    {_bfd_dummy_target, MY_object_p, /* bfd_check_format */
+       bfd_generic_archive_p, MY_core_file_p},
+    {bfd_false, MY_mkobject,    /* bfd_set_format */
+       _bfd_generic_mkarchive, bfd_false},
+    {bfd_false, MY_write_object_contents, /* bfd_write_contents */
+       _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (MY),
+     BFD_JUMP_TABLE_COPY (MY),
+     BFD_JUMP_TABLE_CORE (MY),
+     BFD_JUMP_TABLE_ARCHIVE (MY),
+     BFD_JUMP_TABLE_SYMBOLS (MY),
+     BFD_JUMP_TABLE_RELOCS (MY),
+     BFD_JUMP_TABLE_WRITE (MY),
+     BFD_JUMP_TABLE_LINK (MY),
+     BFD_JUMP_TABLE_DYNAMIC (MY),
+
+  (PTR) MY_backend_data,
+};
@@ -0,0 +1,236 @@
+/* BFD back-end for a.out files encapsulated with COFF headers.
+   Copyright (C) 1990, 1991 Free Software Foundation, Inc.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* THIS MODULE IS NOT FINISHED.  IT PROBABLY DOESN'T EVEN COMPILE.  */
+
+#if 0
+#define	TARGET_PAGE_SIZE	4096
+#define	SEGMENT_SIZE	TARGET_PAGE_SIZE
+#define TEXT_START_ADDR 0
+#define BYTES_IN_WORD 4
+#endif
+
+#include "bfd.h"
+#include <sysdep.h>
+#include "libbfd.h"
+#include <aout/aout64.h>
+#include "aout/stab_gnu.h"
+#include "aout/ar.h"
+#include "libaout.h"           /* BFD a.out internal data structures */
+
+const bfd_target *encap_real_callback ();
+
+const bfd_target *
+encap_object_p (abfd)
+     bfd *abfd;
+{
+  unsigned char magicbuf[4]; /* Raw bytes of magic number from file */
+  unsigned long magic;		/* Swapped magic number */
+  short coff_magic;
+  struct external_exec exec_bytes;
+  struct internal_exec exec;
+
+  if (bfd_read ((PTR)magicbuf, 1, sizeof (magicbuf), abfd) !=
+      sizeof (magicbuf))
+    {
+      if (bfd_get_error () != bfd_error_system_call)
+	bfd_set_error (bfd_error_wrong_format);
+      return 0;
+    }
+  
+  coff_magic = bfd_h_get_16 (abfd, magicbuf);
+  if (coff_magic != COFF_MAGIC)
+    return 0;			/* Not an encap coff file */
+
+  __header_offset_temp==COFF_MAGIC ? sizeof(struct coffheader) : 0)
+  (fseek ((f), HEADER_OFFSET((f)), 1))
+
+  magic = bfd_h_get_32 (abfd, magicbuf);
+
+  if (N_BADMAG (*((struct internal_exec *) &magic))) return 0;
+
+  struct external_exec exec_bytes;
+  if (bfd_read ((PTR) &exec_bytes, 1, EXEC_BYTES_SIZE, abfd)
+      != EXEC_BYTES_SIZE) {
+    if (bfd_get_error () != bfd_error_system_call)
+      bfd_set_error (bfd_error_wrong_format);
+    return 0;
+  }
+  NAME(aout,swap_exec_header_in)(abfd, &exec_bytes, &exec);
+
+  return aout_32_some_aout_object_p (abfd, &exec, encap_realcallback);
+}
+
+/* Finish up the reading of a encapsulated-coff a.out file header */
+const bfd_target *
+encap_real_callback (abfd)
+     bfd *abfd;
+{
+  struct internal_exec *execp = exec_hdr (abfd);
+  
+  MY(callback)(abfd, execp);
+  
+  /* If we have a coff header, it can give us better values for
+     text_start and exec_data_start.  This is particularly useful
+     for remote debugging of embedded systems.  */
+  if (N_FLAGS(exec_aouthdr) & N_FLAGS_COFF_ENCAPSULATE)
+  {
+	  struct coffheader ch;
+	  int val;
+	  val = lseek (execchan, -(sizeof (AOUTHDR) + sizeof (ch)), 1);
+	  if (val == -1)
+		  perror_with_name (filename);
+	  val = myread (execchan, &ch, sizeof (ch));
+	  if (val < 0)
+		  perror_with_name (filename);
+	  text_start = ch.text_start;
+	  exec_data_start = ch.data_start;
+  } else
+	 {
+	  text_start =
+	    IS_OBJECT_FILE (exec_aouthdr) ? 0 : N_TXTADDR (exec_aouthdr);
+	  exec_data_start = IS_OBJECT_FILE (exec_aouthdr)
+	    ? exec_aouthdr.a_text : N_DATADDR (exec_aouthdr);
+  }
+
+  /* Determine the architecture and machine type of the object file.  */
+  bfd_default_set_arch_mach(abfd, bfd_arch_m68k, 0); /* FIXME */
+
+  return abfd->xvec;
+}
+
+/* Write an object file in Encapsulated COFF format.
+   Section contents have already been written.  We write the
+   file header, symbols, and relocation.  */
+
+boolean
+encap_write_object_contents (abfd)
+     bfd *abfd;
+{
+  bfd_size_type data_pad = 0;
+  struct external_exec exec_bytes;
+  struct internal_exec *execp = exec_hdr (abfd);
+
+/****** FIXME:  Fragments from the old GNU LD program for dealing with
+        encap coff.  */
+struct coffheader coffheader;
+int need_coff_header;
+
+  /* Determine whether to count the header as part of
+     the text size, and initialize the text size accordingly.
+     This depends on the kind of system and on the output format selected.  */
+
+  N_SET_MAGIC (outheader, magic);
+#ifdef INITIALIZE_HEADER
+  INITIALIZE_HEADER;
+#endif
+
+  text_size = sizeof (struct exec);
+#ifdef COFF_ENCAPSULATE
+  if (relocatable_output == 0 && file_table[0].just_syms_flag == 0)
+    {
+      need_coff_header = 1;
+      /* set this flag now, since it will change the values of N_TXTOFF, etc */
+      N_SET_FLAGS (outheader, aout_backend_info (abfd)->exec_hdr_flags);
+      text_size += sizeof (struct coffheader);
+    }
+#endif
+
+#ifdef COFF_ENCAPSULATE
+  if (need_coff_header)
+    {
+      /* We are encapsulating BSD format within COFF format.  */
+      struct coffscn *tp, *dp, *bp;
+
+      tp = &coffheader.scns[0];
+      dp = &coffheader.scns[1];
+      bp = &coffheader.scns[2];
+
+      strcpy (tp->s_name, ".text");
+      tp->s_paddr = text_start;
+      tp->s_vaddr = text_start;
+      tp->s_size = text_size;
+      tp->s_scnptr = sizeof (struct coffheader) + sizeof (struct exec);
+      tp->s_relptr = 0;
+      tp->s_lnnoptr = 0;
+      tp->s_nreloc = 0;
+      tp->s_nlnno = 0;
+      tp->s_flags = 0x20;
+      strcpy (dp->s_name, ".data");
+      dp->s_paddr = data_start;
+      dp->s_vaddr = data_start;
+      dp->s_size = data_size;
+      dp->s_scnptr = tp->s_scnptr + tp->s_size;
+      dp->s_relptr = 0;
+      dp->s_lnnoptr = 0;
+      dp->s_nreloc = 0;
+      dp->s_nlnno = 0;
+      dp->s_flags = 0x40;
+      strcpy (bp->s_name, ".bss");
+      bp->s_paddr = dp->s_vaddr + dp->s_size;
+      bp->s_vaddr = bp->s_paddr;
+      bp->s_size = bss_size;
+      bp->s_scnptr = 0;
+      bp->s_relptr = 0;
+      bp->s_lnnoptr = 0;
+      bp->s_nreloc = 0;
+      bp->s_nlnno = 0;
+      bp->s_flags = 0x80;
+
+      coffheader.f_magic = COFF_MAGIC;
+      coffheader.f_nscns = 3;
+      /* store an unlikely time so programs can
+       * tell that there is a bsd header
+       */
+      coffheader.f_timdat = 1;
+      coffheader.f_symptr = 0;
+      coffheader.f_nsyms = 0;
+      coffheader.f_opthdr = 28;
+      coffheader.f_flags = 0x103;
+      /* aouthdr */
+      coffheader.magic = ZMAGIC;
+      coffheader.vstamp = 0;
+      coffheader.tsize = tp->s_size;
+      coffheader.dsize = dp->s_size;
+      coffheader.bsize = bp->s_size;
+      coffheader.entry = outheader.a_entry;
+      coffheader.text_start = tp->s_vaddr;
+      coffheader.data_start = dp->s_vaddr;
+    }
+#endif
+
+#ifdef COFF_ENCAPSULATE
+  if (need_coff_header)
+    mywrite (&coffheader, sizeof coffheader, 1, outdesc);
+#endif
+
+#ifndef COFF_ENCAPSULATE
+  padfile (N_TXTOFF (outheader) - sizeof outheader, outdesc);
+#endif
+
+  text_size -= N_TXTOFF (outheader);
+  WRITE_HEADERS(abfd, execp);
+  return true;
+}
+
+#define MY_write_object_content encap_write_object_contents
+#define MY_object_p encap_object_p
+#define MY_exec_hdr_flags N_FLAGS_COFF_ENCAPSULATE
+
+#include "aout-target.h"
@@ -0,0 +1,399 @@
+/* BFD back-end for ns32k a.out-ish binaries.
+   Copyright (C) 1990, 1991, 1992, 1994, 1995 Free Software Foundation, Inc.
+   Contributed by Ian Dall (idall@eleceng.adelaide.edu.au).
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define BYTES_IN_WORD 4
+
+#include "bfd.h"
+#include "aout/aout64.h"
+
+#define MYNS(OP) CAT(ns32kaout_,OP)
+reloc_howto_type *
+MYNS(bfd_reloc_type_lookup)
+  PARAMS((bfd *abfd AND
+	  bfd_reloc_code_real_type code));
+
+boolean
+MYNS(write_object_contents)
+  PARAMS((bfd *abfd));
+
+/* Avoid multiple definitions from aoutx if supporting standard a.out format(s)
+ * as well as this one
+ */
+#define NAME(x,y) CAT3(ns32kaout,_32_,y)
+
+void bfd_ns32k_arch PARAMS ((void));
+long ns32k_get_displacement PARAMS ((bfd_byte *buffer, long offset, long size));
+int ns32k_put_displacement PARAMS ((long value, bfd_byte *buffer, long offset, long size));
+long ns32k_get_immediate PARAMS ((bfd_byte *buffer, long offset, long size));
+int ns32k_put_immediate  PARAMS ((long value, bfd_byte *buffer, long offset, long size));
+bfd_reloc_status_type
+  ns32k_reloc_disp PARAMS ((bfd *abfd, arelent *reloc_entry,
+		   struct symbol_cache_entry *symbol,
+		   PTR data,
+		   asection *input_section,
+		   bfd *output_bfd,
+		   char **error_message));
+bfd_reloc_status_type
+  ns32k_reloc_imm  PARAMS ((bfd *abfd,
+		   arelent *reloc_entry,
+		   struct symbol_cache_entry *symbol,
+		   PTR data,
+		   asection *input_section,
+		   bfd *output_bfd,
+		   char **error_message));
+bfd_reloc_status_type
+  ns32k_final_link_relocate  PARAMS ((reloc_howto_type *howto,
+			     bfd *input_bfd,
+			     asection *input_section,
+			     bfd_byte *contents,
+			     bfd_vma address,
+			     bfd_vma value,
+			     bfd_vma addend ));
+bfd_reloc_status_type
+  ns32k_relocate_contents  PARAMS ((reloc_howto_type *howto,
+			   bfd *input_bfd,
+			   bfd_vma relocation,
+			   bfd_byte *location));
+
+#include "libaout.h"
+
+#define MY(OP) MYNS(OP)
+
+#define MY_swap_std_reloc_in MY(swap_std_reloc_in)
+#define MY_swap_std_reloc_out MY(swap_std_reloc_out)
+
+static void
+MY_swap_std_reloc_in PARAMS ((bfd *abfd, struct reloc_std_external *bytes,
+			      arelent *cache_ptr, asymbol **symbols,
+			      bfd_size_type symcount));
+
+static void
+MY_swap_std_reloc_out PARAMS ((bfd *abfd, arelent *g,
+			       struct reloc_std_external *natptr));
+
+/* The ns32k series is ah, unusual, when it comes to relocation.
+ * There are three storage methods for relocateable objects.  There
+ * are displacements, immediate operands and ordinary twos complement
+ * data. Of these, only the last fits into the standard relocation
+ * scheme.  Immediate operands are stored huffman encoded and
+ * immediate operands are stored big endian (where as the natural byte
+ * order is little endian for this achitecture).
+
+ * Note that the ns32k displacement storage method is orthogonal to
+ * whether the relocation is pc relative or not. The "displacement"
+ * storage scheme is used for essentially all address constants. The
+ * displacement can be relative to zero (absolute displacement),
+ * relative to the pc (pc relative), the stack pointer, the frame
+ * pointer, the static base register and general purpose register etc.
+
+ * For example:
+ *
+ *  sym1: .long .	# pc relative 2's complement
+ *  sym1: .long foo	# 2's complement not pc relative
+ *
+ *  self:  movd @self, r0 # pc relative displacement
+ *	   movd foo, r0 # non pc relative displacement
+ *
+ *  self:  movd self, r0 # pc relative immediate
+ *         movd foo, r0 # non pc relative immediate
+ *
+ * In addition, for historical reasons the encoding of the relocation types
+ * in the a.out format relocation entries is such that even the relocation
+ * methods which are standard are not encoded the standard way.
+ *
+ */
+
+reloc_howto_type MY(howto_table)[] = 
+{
+/* ns32k immediate operands */
+HOWTO(BFD_RELOC_NS32K_IMM_8, 0, 0, 8, false, 0, true,
+       ns32k_reloc_imm, "NS32K_IMM_8",
+       true, 0x000000ff,0x000000ff, false),
+HOWTO(BFD_RELOC_NS32K_IMM_16, 0, 1, 16, false, 0, true,
+       ns32k_reloc_imm,  "NS32K_IMM_16",
+       true, 0x0000ffff,0x0000ffff, false),
+HOWTO(BFD_RELOC_NS32K_IMM_32, 0, 2, 32, false, 0, true,
+       ns32k_reloc_imm, "NS32K_IMM_32",
+       true, 0xffffffff,0xffffffff, false),
+HOWTO(BFD_RELOC_NS32K_IMM_8_PCREL, 0, 0, 8, true, 0, false,
+       ns32k_reloc_imm, "PCREL_NS32K_IMM_8",
+       true, 0x000000ff, 0x000000ff, false),
+HOWTO(BFD_RELOC_NS32K_IMM_16_PCREL, 0, 1, 16, true, 0, false,
+       ns32k_reloc_imm, "PCREL_NS32K_IMM_16",
+       true, 0x0000ffff,0x0000ffff, false),
+HOWTO(BFD_RELOC_NS32K_IMM_32_PCREL, 0, 2, 32, true, 0, false,
+       ns32k_reloc_imm, "PCREL_NS32K_IMM_32",
+       true, 0xffffffff,0xffffffff, false),
+
+/* ns32k displacements */
+HOWTO(BFD_RELOC_NS32K_DISP_8, 0, 0, 8, false, 0, true,
+       ns32k_reloc_disp, "NS32K_DISP_8",
+       true, 0x000000ff,0x000000ff, false),
+HOWTO(BFD_RELOC_NS32K_DISP_16, 0, 1, 16, false, 0, true,
+       ns32k_reloc_disp, "NS32K_DISP_16",
+       true, 0x0000ffff, 0x0000ffff, false),
+HOWTO(BFD_RELOC_NS32K_DISP_32, 0, 2, 32, false, 0, true,
+       ns32k_reloc_disp, "NS32K_DISP_32",
+       true, 0xffffffff, 0xffffffff, false),
+HOWTO(BFD_RELOC_NS32K_DISP_8_PCREL, 0, 0, 8, true, 0, false,
+       ns32k_reloc_disp, "PCREL_NS32K_DISP_8",
+       true, 0x000000ff,0x000000ff, false),
+HOWTO(BFD_RELOC_NS32K_DISP_16_PCREL, 0, 1, 16, true, 0, false,
+       ns32k_reloc_disp, "PCREL_NS32K_DISP_16",
+       true, 0x0000ffff,0x0000ffff, false),
+HOWTO(BFD_RELOC_NS32K_DISP_32_PCREL, 0, 2, 32, true, 0, false,
+       ns32k_reloc_disp, "PCREL_NS32K_DISP_32",
+       true, 0xffffffff,0xffffffff, false),
+
+/* Normal 2's complement */
+HOWTO(BFD_RELOC_8, 0, 0, 8, false, 0, complain_overflow_bitfield,0,
+      "8", true, 0x000000ff,0x000000ff, false),
+HOWTO(BFD_RELOC_16, 0, 1, 16, false, 0, complain_overflow_bitfield,0,
+      "16", true, 0x0000ffff,0x0000ffff, false),
+HOWTO(BFD_RELOC_32, 0, 2, 32, false, 0, complain_overflow_bitfield,0,
+      "32", true, 0xffffffff,0xffffffff, false),
+HOWTO(BFD_RELOC_8_PCREL, 0, 0, 8, true, 0, complain_overflow_signed, 0,
+      "PCREL_8", true, 0x000000ff,0x000000ff, false),
+HOWTO(BFD_RELOC_16_PCREL, 0, 1, 16, true, 0, complain_overflow_signed, 0,
+      "PCREL_16", true, 0x0000ffff,0x0000ffff, false),
+HOWTO(BFD_RELOC_32_PCREL, 0, 2, 32, true, 0, complain_overflow_signed, 0,
+      "PCREL_32", true, 0xffffffff,0xffffffff, false),
+};
+
+
+#define CTOR_TABLE_RELOC_HOWTO(BFD) (MY(howto_table) + 14)
+
+#define RELOC_STD_BITS_NS32K_TYPE_BIG 0x06
+#define RELOC_STD_BITS_NS32K_TYPE_LITTLE 0x60
+#define RELOC_STD_BITS_NS32K_TYPE_SH_BIG 1
+#define RELOC_STD_BITS_NS32K_TYPE_SH_LITTLE 5
+
+reloc_howto_type *
+MY(reloc_howto)(abfd, rel, r_index, r_extern, r_pcrel)
+     bfd *abfd;
+     struct reloc_std_external *rel;
+     int *r_index;
+     int *r_extern;
+     int *r_pcrel;
+{
+  unsigned int r_length;
+  int r_ns32k_type;
+/*  BFD_ASSERT(bfd_header_little_endian (abfd)); */
+  *r_index =  ((rel->r_index[2] << 16)
+	       | (rel->r_index[1] << 8)
+	       |  rel->r_index[0] );
+  *r_extern  = (0 != (rel->r_type[0] & RELOC_STD_BITS_EXTERN_LITTLE));
+  *r_pcrel   = (0 != (rel->r_type[0] & RELOC_STD_BITS_PCREL_LITTLE));
+  r_length  =  ((rel->r_type[0] & RELOC_STD_BITS_LENGTH_LITTLE)
+		>> RELOC_STD_BITS_LENGTH_SH_LITTLE);
+  r_ns32k_type  =  ((rel->r_type[0] & RELOC_STD_BITS_NS32K_TYPE_LITTLE)
+		    >> RELOC_STD_BITS_NS32K_TYPE_SH_LITTLE);
+  return (MY(howto_table) + r_length + 3 * (*r_pcrel) + 6 * r_ns32k_type);
+}
+
+#define MY_reloc_howto(BFD,REL,IN,EX,PC) MY(reloc_howto)(BFD, REL, &IN, &EX, &PC)
+
+void
+MY(put_reloc)(abfd, r_extern, r_index, value, howto, reloc)
+     bfd *abfd;
+     int r_extern;
+     int r_index;
+     long value;
+     reloc_howto_type *howto;
+     struct reloc_std_external *reloc;
+{
+  unsigned int r_length;
+  int r_pcrel;
+  int r_ns32k_type;
+  PUT_WORD (abfd, value, reloc->r_address);
+  r_length = howto->size ;	/* Size as a power of two */
+  r_pcrel  = (int) howto->pc_relative; /* Relative to PC? */
+  r_ns32k_type = (howto - MY(howto_table) )/6;
+/*  BFD_ASSERT (bfd_header_little_endian (abfd)); */
+  reloc->r_index[2] = r_index >> 16;
+  reloc->r_index[1] = r_index >> 8;
+  reloc->r_index[0] = r_index;
+  reloc->r_type[0] =
+    (r_extern?    RELOC_STD_BITS_EXTERN_LITTLE: 0)
+      | (r_pcrel?     RELOC_STD_BITS_PCREL_LITTLE: 0)
+	| (r_length <<  RELOC_STD_BITS_LENGTH_SH_LITTLE)
+	  | (r_ns32k_type <<  RELOC_STD_BITS_NS32K_TYPE_SH_LITTLE);
+}
+
+#define MY_put_reloc(BFD, EXT, IDX, VAL, HOWTO, RELOC) \
+  MY(put_reloc)(BFD, EXT, IDX, VAL, HOWTO, RELOC)
+
+#define STAT_FOR_EXEC
+
+#define MY_final_link_relocate ns32k_final_link_relocate
+#define MY_relocate_contents ns32k_relocate_contents
+
+#include <aoutx.h>
+
+reloc_howto_type *
+  MY(bfd_reloc_type_lookup)(abfd,code)
+      bfd *abfd;
+      bfd_reloc_code_real_type code;
+{
+
+#define ENTRY(i,j)	case i: return &MY(howto_table)[j]
+
+  int ext = obj_reloc_entry_size (abfd) == RELOC_EXT_SIZE;
+
+  BFD_ASSERT(ext == 0);
+  if (code == BFD_RELOC_CTOR)
+    switch (bfd_get_arch_info (abfd)->bits_per_address)
+      {
+      case 32:
+	code = BFD_RELOC_32;
+	break;
+      }
+  switch (code)
+    {
+      ENTRY(BFD_RELOC_NS32K_IMM_8, 0);
+      ENTRY(BFD_RELOC_NS32K_IMM_16, 1);
+      ENTRY(BFD_RELOC_NS32K_IMM_32, 2);
+      ENTRY(BFD_RELOC_NS32K_IMM_8_PCREL, 3);
+      ENTRY(BFD_RELOC_NS32K_IMM_16_PCREL, 4);
+      ENTRY(BFD_RELOC_NS32K_IMM_32_PCREL, 5);
+      ENTRY(BFD_RELOC_NS32K_DISP_8, 6);
+      ENTRY(BFD_RELOC_NS32K_DISP_16, 7);
+      ENTRY(BFD_RELOC_NS32K_DISP_32, 8);
+      ENTRY(BFD_RELOC_NS32K_DISP_8_PCREL, 9);
+      ENTRY(BFD_RELOC_NS32K_DISP_16_PCREL, 10);
+      ENTRY(BFD_RELOC_NS32K_DISP_32_PCREL, 11);
+      ENTRY(BFD_RELOC_8, 12);
+      ENTRY(BFD_RELOC_16, 13);
+      ENTRY(BFD_RELOC_32, 14);
+      ENTRY(BFD_RELOC_8_PCREL, 15);
+      ENTRY(BFD_RELOC_16_PCREL, 16);
+      ENTRY(BFD_RELOC_32_PCREL, 17);
+    default: return (reloc_howto_type *) NULL;
+    }
+#undef ENTRY
+}
+
+
+static void
+MY_swap_std_reloc_in (abfd, bytes, cache_ptr, symbols, symcount)
+     bfd *abfd;
+     struct reloc_std_external *bytes;
+     arelent *cache_ptr;
+     asymbol **symbols;
+     bfd_size_type symcount;
+{
+  int r_index;
+  int r_extern;
+  int r_pcrel;
+  struct aoutdata  *su = &(abfd->tdata.aout_data->a);
+
+  cache_ptr->address = bfd_h_get_32 (abfd, bytes->r_address);
+
+  /* now the fun stuff */
+
+  cache_ptr->howto = MY_reloc_howto(abfd, bytes, r_index, r_extern, r_pcrel);
+
+  MOVE_ADDRESS(0);
+}
+
+static void
+MY_swap_std_reloc_out (abfd, g, natptr)
+     bfd *abfd;
+     arelent *g;
+     struct reloc_std_external *natptr;
+{
+  int r_index;
+  asymbol *sym = *(g->sym_ptr_ptr);
+  int r_extern;
+  unsigned int r_addend;
+  asection *output_section = sym->section->output_section;
+
+  r_addend = g->addend + (*(g->sym_ptr_ptr))->section->output_section->vma;
+    
+  /* name was clobbered by aout_write_syms to be symbol index */
+
+  /* If this relocation is relative to a symbol then set the 
+     r_index to the symbols index, and the r_extern bit.
+
+     Absolute symbols can come in in two ways, either as an offset
+     from the abs section, or as a symbol which has an abs value.
+     Check for that here.  */
+
+  if (bfd_is_com_section (output_section)
+      || output_section == &bfd_abs_section
+      || output_section == &bfd_und_section) 
+    {
+      if (bfd_abs_section.symbol == sym)
+	{
+	  /* Whoops, looked like an abs symbol, but is really an offset
+	     from the abs section */
+	  r_index = 0;
+	  r_extern = 0;
+	}
+      else 
+	{
+	  /* Fill in symbol */
+	  r_extern = 1;
+#undef KEEPIT
+#define KEEPIT udata.i
+	  r_index =  (*(g->sym_ptr_ptr))->KEEPIT;
+#undef KEEPIT     
+	}
+    }
+  else 
+    {
+      /* Just an ordinary section */
+      r_extern = 0;
+      r_index  = output_section->target_index;      
+    }
+
+  MY_put_reloc (abfd, r_extern, r_index, g->address, g->howto, natptr);
+}
+
+bfd_reloc_status_type
+ns32k_relocate_contents (howto, input_bfd, relocation, location)
+     reloc_howto_type *howto;
+     bfd *input_bfd;
+     bfd_vma relocation;
+     bfd_byte *location;
+{
+  int r_ns32k_type = (howto - MY(howto_table)) / 6;
+  long (*get_data)();
+  int (*put_data)();
+
+  switch (r_ns32k_type)
+    {
+    case 0:
+      get_data = ns32k_get_immediate;
+      put_data = ns32k_put_immediate;
+      break;
+    case 1:
+      get_data = ns32k_get_displacement;
+      put_data = ns32k_put_displacement;
+      break;
+    case 2:
+      return _bfd_relocate_contents (howto, input_bfd, relocation,
+				    location);
+      /* NOT REACHED */
+      break;
+    }
+  return do_ns32k_reloc_contents (howto, input_bfd, relocation,
+				 location, get_data, put_data);
+}
@@ -1,5 +1,5 @@
 /* Define a target vector and some small routines for a variant of a.out.
-   Copyright (C) 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+   Copyright (C) 1990, 91, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.

 This file is part of BFD, the Binary File Descriptor library.

@@ -15,14 +15,14 @@ GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

 #include "aout/aout64.h"
 #include "aout/stab_gnu.h"
 #include "aout/ar.h"
 /*#include "libaout.h"*/

-extern CONST struct reloc_howto_struct * NAME(aout,reloc_type_lookup) ();
+extern reloc_howto_type * NAME(aout,reloc_type_lookup) ();

 /* Set parameters about this a.out file that are machine-dependent.
   This routine is called from some_aout_object_p just before it returns.  */
@@ -43,6 +43,10 @@ MY(callback) (abfd)
  obj_datasec (abfd)->vma = N_DATADDR(*execp);
  obj_bsssec  (abfd)->vma = N_BSSADDR(*execp);

+  obj_textsec (abfd)->lma = obj_textsec (abfd)->vma;
+  obj_datasec (abfd)->lma = obj_datasec (abfd)->vma;
+  obj_bsssec (abfd)->lma = obj_bsssec (abfd)->vma;
+
  /* The file offsets of the sections */
  obj_textsec (abfd)->filepos = N_TXTOFF (*execp);
  obj_datasec (abfd)->filepos = N_DATOFF (*execp);
@@ -54,7 +58,7 @@ MY(callback) (abfd)
  /* The file offsets of the string table and symbol table.  */
  obj_sym_filepos (abfd) = N_SYMOFF (*execp);
  obj_str_filepos (abfd) = N_STROFF (*execp);
-
+  
  /* Determine the architecture and machine type of the object file.  */
 #ifdef SET_ARCH_MACH
  SET_ARCH_MACH(abfd, *execp);
@@ -85,11 +89,11 @@ MY(callback) (abfd)
  /* Don't set sizes now -- can't be sure until we know arch & mach.
     Sizes get set in set_sizes callback, later.  */
 #if 0
-  adata(abfd).page_size = PAGE_SIZE;
+  adata(abfd).page_size = TARGET_PAGE_SIZE;
 #ifdef SEGMENT_SIZE
  adata(abfd).segment_size = SEGMENT_SIZE;
 #else
-  adata(abfd).segment_size = PAGE_SIZE;
+  adata(abfd).segment_size = TARGET_PAGE_SIZE;
 #endif
  adata(abfd).exec_bytes_size = EXEC_BYTES_SIZE;
 #endif
@@ -170,11 +174,11 @@ MY(mkobject) (abfd)
    return false;
 #if 0 /* Sizes get set in set_sizes callback, later, after we know
 	 the architecture and machine.  */
-  adata(abfd).page_size = PAGE_SIZE;
+  adata(abfd).page_size = TARGET_PAGE_SIZE;
 #ifdef SEGMENT_SIZE
  adata(abfd).segment_size = SEGMENT_SIZE;
 #else
-  adata(abfd).segment_size = PAGE_SIZE;
+  adata(abfd).segment_size = TARGET_PAGE_SIZE;
 #endif
  adata(abfd).exec_bytes_size = EXEC_BYTES_SIZE;
 #endif
@@ -199,7 +203,8 @@ MY_bfd_copy_private_section_data (ibfd, isec, obfd, osec)
     bfd *obfd;
     asection *osec;
 {
-  obj_aout_subformat (obfd) = obj_aout_subformat (ibfd);
+  if (bfd_get_flavour (obfd) == bfd_target_aout_flavour)
+    obj_aout_subformat (obfd) = obj_aout_subformat (ibfd);
  return true;
 }

@@ -235,18 +240,18 @@ static boolean
 MY(set_sizes) (abfd)
     bfd *abfd;
 {
-  adata(abfd).page_size = PAGE_SIZE;
+  adata(abfd).page_size = TARGET_PAGE_SIZE;

 #ifdef SEGMENT_SIZE
  adata(abfd).segment_size = SEGMENT_SIZE;
 #else
-  adata(abfd).segment_size = PAGE_SIZE;
+  adata(abfd).segment_size = TARGET_PAGE_SIZE;
 #endif

 #ifdef ZMAGIC_DISK_BLOCK_SIZE
  adata(abfd).zmagic_disk_block_size = ZMAGIC_DISK_BLOCK_SIZE;
 #else
-  adata(abfd).zmagic_disk_block_size = PAGE_SIZE;
+  adata(abfd).zmagic_disk_block_size = TARGET_PAGE_SIZE;
 #endif

  adata(abfd).exec_bytes_size = EXEC_BYTES_SIZE;
@@ -261,9 +266,15 @@ MY(set_sizes) (abfd)

 #ifndef MY_backend_data

+#ifndef MY_zmagic_contiguous
+#define MY_zmagic_contiguous 0
+#endif
 #ifndef MY_text_includes_header
 #define MY_text_includes_header 0
 #endif
+#ifndef MY_exec_header_not_counted
+#define MY_exec_header_not_counted 0
+#endif
 #ifndef MY_add_dynamic_symbols
 #define MY_add_dynamic_symbols 0
 #endif
@@ -284,12 +295,12 @@ MY(set_sizes) (abfd)
 #endif

 static CONST struct aout_backend_data MY(backend_data) = {
-  0,				/* zmagic contiguous */
+  MY_zmagic_contiguous,
  MY_text_includes_header,
  MY_exec_hdr_flags,
  0,				/* text vma? */
  MY_set_sizes,
-  0,				/* exec header is counted */
+  MY_exec_header_not_counted,
  MY_add_dynamic_symbols,
  MY_add_one_symbol,
  MY_link_dynamic_object,
@@ -342,6 +353,9 @@ MY_bfd_final_link (abfd, info)
 #ifndef	MY_openr_next_archived_file
 #define	MY_openr_next_archived_file	bfd_generic_openr_next_archived_file
 #endif
+#ifndef MY_get_elt_at_index
+#define MY_get_elt_at_index		_bfd_generic_get_elt_at_index
+#endif
 #ifndef	MY_generic_stat_arch_elt
 #define	MY_generic_stat_arch_elt	bfd_generic_stat_arch_elt
 #endif
@@ -351,12 +365,22 @@ MY_bfd_final_link (abfd, info)
 #ifndef	MY_slurp_extended_name_table
 #define	MY_slurp_extended_name_table	_bfd_slurp_extended_name_table
 #endif
+#ifndef MY_construct_extended_name_table
+#define MY_construct_extended_name_table \
+  _bfd_archive_bsd_construct_extended_name_table
+#endif
 #ifndef	MY_write_armap
 #define	MY_write_armap		bsd_write_armap
 #endif
+#ifndef MY_read_ar_hdr
+#define MY_read_ar_hdr		_bfd_generic_read_ar_hdr
+#endif
 #ifndef	MY_truncate_arname
 #define	MY_truncate_arname		bfd_bsd_truncate_arname
 #endif
+#ifndef MY_update_armap_timestamp
+#define MY_update_armap_timestamp _bfd_archive_bsd_update_armap_timestamp
+#endif

 /* No core file defined here -- configure in trad-core.c separately.  */
 #ifndef	MY_core_file_failing_command
@@ -399,6 +423,9 @@ MY_bfd_final_link (abfd, info)
 #ifndef MY_get_section_contents
 #define MY_get_section_contents NAME(aout,get_section_contents)
 #endif
+#ifndef MY_get_section_contents_in_window
+#define MY_get_section_contents_in_window _bfd_generic_get_section_contents_in_window
+#endif
 #ifndef MY_new_section_hook
 #define MY_new_section_hook NAME(aout,new_section_hook)
 #endif
@@ -448,17 +475,43 @@ MY_bfd_final_link (abfd, info)
 #ifndef MY_bfd_make_debug_symbol
 #define MY_bfd_make_debug_symbol 0
 #endif
+#ifndef MY_read_minisymbols
+#define MY_read_minisymbols NAME(aout,read_minisymbols)
+#endif
+#ifndef MY_minisymbol_to_symbol
+#define MY_minisymbol_to_symbol NAME(aout,minisymbol_to_symbol)
+#endif
 #ifndef MY_bfd_link_hash_table_create
 #define MY_bfd_link_hash_table_create NAME(aout,link_hash_table_create)
 #endif
 #ifndef MY_bfd_link_add_symbols
 #define MY_bfd_link_add_symbols NAME(aout,link_add_symbols)
 #endif
+#ifndef MY_bfd_link_split_section
+#define MY_bfd_link_split_section  _bfd_generic_link_split_section
+#endif
+

 #ifndef MY_bfd_copy_private_bfd_data
 #define MY_bfd_copy_private_bfd_data _bfd_generic_bfd_copy_private_bfd_data
 #endif

+#ifndef MY_bfd_merge_private_bfd_data
+#define MY_bfd_merge_private_bfd_data _bfd_generic_bfd_merge_private_bfd_data
+#endif
+
+#ifndef MY_bfd_copy_private_symbol_data
+#define MY_bfd_copy_private_symbol_data _bfd_generic_bfd_copy_private_symbol_data
+#endif
+
+#ifndef MY_bfd_print_private_bfd_data
+#define MY_bfd_print_private_bfd_data _bfd_generic_bfd_print_private_bfd_data
+#endif
+
+#ifndef MY_bfd_set_private_flags
+#define MY_bfd_set_private_flags _bfd_generic_bfd_set_private_flags
+#endif
+
 #ifndef MY_bfd_is_local_label
 #define MY_bfd_is_local_label bfd_generic_is_local_label
 #endif
@@ -489,7 +542,7 @@ MY_bfd_final_link (abfd, info)
 #endif

 /* Aout symbols normally have leading underscores */
-#ifndef MY_symbol_leading_char
+#ifndef MY_symbol_leading_char 
 #define MY_symbol_leading_char '_'
 #endif

@@ -504,11 +557,11 @@ const bfd_target MY(vec) =
  TARGETNAME,		/* name */
  bfd_target_aout_flavour,
 #ifdef TARGET_IS_BIG_ENDIAN_P
-  true,				/* target byte order (big) */
-  true,				/* target headers byte order (big) */
+  BFD_ENDIAN_BIG,		/* target byte order (big) */
+  BFD_ENDIAN_BIG,		/* target headers byte order (big) */
 #else
-  false,			/* target byte order (little) */
-  false,			/* target headers byte order (little) */
+  BFD_ENDIAN_LITTLE,		/* target byte order (little) */
+  BFD_ENDIAN_LITTLE,		/* target headers byte order (little) */
 #endif
  (HAS_RELOC | EXEC_P |		/* object flags */
   HAS_LINENO | HAS_DEBUG |
@@ -517,7 +570,6 @@ const bfd_target MY(vec) =
  MY_symbol_leading_char,
  AR_PAD_CHAR,			/* ar_pad_char */
  15,				/* ar_max_namelen */
-  3,				/* minimum alignment */
 #ifdef TARGET_IS_BIG_ENDIAN_P
  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
@@ -0,0 +1,32 @@
+/* BFD backend for SunOS style a.out with flags set to 0
+   Copyright (C) 1990, 91, 92, 93, 1994 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGETNAME "a.out-zero-big"
+#define MY(OP) CAT(aout0_big_,OP)
+
+#include "bfd.h"
+
+#define MY_exec_hdr_flags 0
+
+#define MACHTYPE_OK(mtype) \
+  ((mtype) == M_UNKNOWN || (mtype) == M_68010 || (mtype) == M_68020)
+
+/* Include the usual a.out support.  */
+#include "aoutf1.h"
@@ -16,7 +16,7 @@ GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

 #define ARCH_SIZE 32

@@ -0,0 +1,31 @@
+/* BFD back-end for 64-bit a.out files.
+   Copyright 1990, 1991, 1992  Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define ARCH_SIZE 64
+
+/* aoutx.h requires definitions for BMAGIC and QMAGIC.  */
+#ifndef BMAGIC
+#define BMAGIC 0
+#endif
+#ifndef QMAGIC
+#define QMAGIC 0
+#endif
+
+#include "aoutx.h"
@@ -0,0 +1,788 @@
+/* A.out "format 1" file handling code for BFD.
+   Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+
+#include "aout/sun4.h"
+#include "libaout.h"		/* BFD a.out internal data structures */
+
+#include "aout/aout64.h"
+#include "aout/stab_gnu.h"
+#include "aout/ar.h"
+
+/* This is needed to reject a NewsOS file, e.g. in
+   gdb/testsuite/gdb.t10/crossload.exp. <kingdon@cygnus.com>
+   I needed to add M_UNKNOWN to recognize a 68000 object, so this will
+   probably no longer reject a NewsOS object.  <ian@cygnus.com>. */
+#ifndef MACHTYPE_OK
+#define MACHTYPE_OK(mtype) \
+  (((mtype) == M_SPARC && bfd_lookup_arch (bfd_arch_sparc, 0) != NULL) \
+   || (((mtype) == M_UNKNOWN || (mtype) == M_68010 || (mtype) == M_68020) \
+       && bfd_lookup_arch (bfd_arch_m68k, 0) != NULL))
+#endif
+
+/*
+The file @code{aoutf1.h} contains the code for BFD's
+a.out back end. Control over the generated back end is given by these
+two preprocessor names:
+@table @code
+@item ARCH_SIZE
+This value should be either 32 or 64, depending upon the size of an
+int in the target format. It changes the sizes of the structs which
+perform the memory/disk mapping of structures.
+
+The 64 bit backend may only be used if the host compiler supports 64
+ints (eg long long with gcc), by defining the name @code{BFD_HOST_64_BIT} in @code{bfd.h}.
+With this name defined, @emph{all} bfd operations are performed with 64bit
+arithmetic, not just those to a 64bit target.
+
+@item TARGETNAME
+The name put into the target vector.
+@item
+@end table
+
+*/
+
+/*SUPPRESS558*/
+/*SUPPRESS529*/
+
+static void
+#if ARCH_SIZE == 64
+sunos_64_set_arch_mach
+#else
+sunos_32_set_arch_mach
+#endif
+  (abfd, machtype)
+     bfd *abfd;
+     int machtype;
+{
+  /* Determine the architecture and machine type of the object file.  */
+  enum bfd_architecture arch;
+  long machine;
+  switch (machtype)
+    {
+
+    case M_UNKNOWN:
+      /* Some Sun3s make magic numbers without cpu types in them, so
+	 we'll default to the 68000. */
+      arch = bfd_arch_m68k;
+      machine = 68000;
+      break;
+
+    case M_68010:
+    case M_HP200:
+      arch = bfd_arch_m68k;
+      machine = 68010;
+      break;
+
+    case M_68020:
+    case M_HP300:
+      arch = bfd_arch_m68k;
+      machine = 68020;
+      break;
+
+    case M_SPARC:
+      arch = bfd_arch_sparc;
+      machine = 0;
+      break;
+
+    case M_386:
+    case M_386_DYNIX:
+      arch = bfd_arch_i386;
+      machine = 0;
+      break;
+
+    case M_29K:
+      arch = bfd_arch_a29k;
+      machine = 0;
+      break;
+
+    case M_HPUX:
+      arch = bfd_arch_m68k;
+      machine = 0;
+      break;
+
+    default:
+      arch = bfd_arch_obscure;
+      machine = 0;
+      break;
+    }
+  bfd_set_arch_mach (abfd, arch, machine);
+}
+
+#define SET_ARCH_MACH(ABFD, EXEC) \
+  NAME(sunos,set_arch_mach)(ABFD, N_MACHTYPE (EXEC)); \
+  choose_reloc_size(ABFD);
+
+/* Determine the size of a relocation entry, based on the architecture */
+static void
+choose_reloc_size (abfd)
+     bfd *abfd;
+{
+  switch (bfd_get_arch (abfd))
+    {
+    case bfd_arch_sparc:
+    case bfd_arch_a29k:
+      obj_reloc_entry_size (abfd) = RELOC_EXT_SIZE;
+      break;
+    default:
+      obj_reloc_entry_size (abfd) = RELOC_STD_SIZE;
+      break;
+    }
+}
+
+/* Write an object file in SunOS format.
+  Section contents have already been written.  We write the
+  file header, symbols, and relocation.  */
+
+static boolean
+#if ARCH_SIZE == 64
+aout_64_sunos4_write_object_contents
+#else
+aout_32_sunos4_write_object_contents
+#endif
+  (abfd)
+     bfd *abfd;
+{
+  struct external_exec exec_bytes;
+  struct internal_exec *execp = exec_hdr (abfd);
+
+  /* Magic number, maestro, please!  */
+  switch (bfd_get_arch (abfd))
+    {
+    case bfd_arch_m68k:
+      switch (bfd_get_mach (abfd))
+	{
+	case 68000:
+	  N_SET_MACHTYPE (*execp, M_UNKNOWN);
+	  break;
+	case 68010:
+	  N_SET_MACHTYPE (*execp, M_68010);
+	  break;
+	default:
+	case 68020:
+	  N_SET_MACHTYPE (*execp, M_68020);
+	  break;
+	}
+      break;
+    case bfd_arch_sparc:
+      N_SET_MACHTYPE (*execp, M_SPARC);
+      break;
+    case bfd_arch_i386:
+      N_SET_MACHTYPE (*execp, M_386);
+      break;
+    case bfd_arch_a29k:
+      N_SET_MACHTYPE (*execp, M_29K);
+      break;
+    default:
+      N_SET_MACHTYPE (*execp, M_UNKNOWN);
+    }
+
+  choose_reloc_size (abfd);
+
+  N_SET_FLAGS (*execp, aout_backend_info (abfd)->exec_hdr_flags);
+
+  N_SET_DYNAMIC (*execp, bfd_get_file_flags (abfd) & DYNAMIC);
+
+  WRITE_HEADERS (abfd, execp);
+
+  return true;
+}
+
+/* core files */
+
+#define CORE_MAGIC 0x080456
+#define CORE_NAMELEN 16
+
+/* The core structure is taken from the Sun documentation.
+  Unfortunately, they don't document the FPA structure, or at least I
+  can't find it easily.  Fortunately the core header contains its own
+  length.  So this shouldn't cause problems, except for c_ucode, which
+  so far we don't use but is easy to find with a little arithmetic. */
+
+/* But the reg structure can be gotten from the SPARC processor handbook.
+  This really should be in a GNU include file though so that gdb can use
+  the same info. */
+struct regs
+{
+  int r_psr;
+  int r_pc;
+  int r_npc;
+  int r_y;
+  int r_g1;
+  int r_g2;
+  int r_g3;
+  int r_g4;
+  int r_g5;
+  int r_g6;
+  int r_g7;
+  int r_o0;
+  int r_o1;
+  int r_o2;
+  int r_o3;
+  int r_o4;
+  int r_o5;
+  int r_o6;
+  int r_o7;
+};
+
+/* Taken from Sun documentation: */
+
+/* FIXME:  It's worse than we expect.  This struct contains TWO substructs
+  neither of whose size we know, WITH STUFF IN BETWEEN THEM!  We can't
+  even portably access the stuff in between!  */
+
+struct external_sparc_core
+  {
+    int c_magic;		/* Corefile magic number */
+    int c_len;			/* Sizeof (struct core) */
+#define	SPARC_CORE_LEN	432
+    int c_regs[19];		/* General purpose registers -- MACHDEP SIZE */
+    struct external_exec c_aouthdr;	/* A.out header */
+    int c_signo;		/* Killing signal, if any */
+    int c_tsize;		/* Text size (bytes) */
+    int c_dsize;		/* Data size (bytes) */
+    int c_ssize;		/* Stack size (bytes) */
+    char c_cmdname[CORE_NAMELEN + 1];	/* Command name */
+    double fp_stuff[1];		/* external FPU state (size unknown by us) */
+    /* The type "double" is critical here, for alignment.
+    SunOS declares a struct here, but the struct's alignment
+      is double since it contains doubles.  */
+    int c_ucode;		/* Exception no. from u_code */
+    /* (this member is not accessible by name since we don't
+    portably know the size of fp_stuff.) */
+  };
+
+/* Core files generated by the BCP (the part of Solaris which allows
+   it to run SunOS4 a.out files).  */
+struct external_solaris_bcp_core
+  {
+    int c_magic;		/* Corefile magic number */
+    int c_len;			/* Sizeof (struct core) */
+#define	SOLARIS_BCP_CORE_LEN	456
+    int c_regs[19];		/* General purpose registers -- MACHDEP SIZE */
+    int c_exdata_vp;		/* exdata structure */
+    int c_exdata_tsize;
+    int c_exdata_dsize;
+    int c_exdata_bsize;
+    int c_exdata_lsize;
+    int c_exdata_nshlibs;
+    short c_exdata_mach;
+    short c_exdata_mag;
+    int c_exdata_toffset;
+    int c_exdata_doffset;
+    int c_exdata_loffset;
+    int c_exdata_txtorg;
+    int c_exdata_datorg;
+    int c_exdata_entloc;
+    int c_signo;		/* Killing signal, if any */
+    int c_tsize;		/* Text size (bytes) */
+    int c_dsize;		/* Data size (bytes) */
+    int c_ssize;		/* Stack size (bytes) */
+    char c_cmdname[CORE_NAMELEN + 1];	/* Command name */
+    double fp_stuff[1];		/* external FPU state (size unknown by us) */
+    /* The type "double" is critical here, for alignment.
+    SunOS declares a struct here, but the struct's alignment
+      is double since it contains doubles.  */
+    int c_ucode;		/* Exception no. from u_code */
+    /* (this member is not accessible by name since we don't
+    portably know the size of fp_stuff.) */
+  };
+
+struct external_sun3_core
+  {
+    int c_magic;		/* Corefile magic number */
+    int c_len;			/* Sizeof (struct core) */
+#define	SUN3_CORE_LEN	826	/* As of SunOS 4.1.1 */
+    int c_regs[18];		/* General purpose registers -- MACHDEP SIZE */
+    struct external_exec c_aouthdr;	/* A.out header */
+    int c_signo;		/* Killing signal, if any */
+    int c_tsize;		/* Text size (bytes) */
+    int c_dsize;		/* Data size (bytes) */
+    int c_ssize;		/* Stack size (bytes) */
+    char c_cmdname[CORE_NAMELEN + 1];	/* Command name */
+    double fp_stuff[1];		/* external FPU state (size unknown by us) */
+    /* The type "double" is critical here, for alignment.
+    SunOS declares a struct here, but the struct's alignment
+      is double since it contains doubles.  */
+    int c_ucode;		/* Exception no. from u_code */
+    /* (this member is not accessible by name since we don't
+    portably know the size of fp_stuff.) */
+  };
+
+struct internal_sunos_core
+  {
+    int c_magic;		/* Corefile magic number */
+    int c_len;			/* Sizeof (struct core) */
+    long c_regs_pos;		/* file offset of General purpose registers */
+    int c_regs_size;		/* size of General purpose registers */
+    struct internal_exec c_aouthdr;	/* A.out header */
+    int c_signo;		/* Killing signal, if any */
+    int c_tsize;		/* Text size (bytes) */
+    int c_dsize;		/* Data size (bytes) */
+    bfd_vma c_data_addr;	/* Data start (address) */
+    int c_ssize;		/* Stack size (bytes) */
+    bfd_vma c_stacktop;		/* Stack top (address) */
+    char c_cmdname[CORE_NAMELEN + 1];	/* Command name */
+    long fp_stuff_pos;		/* file offset of external FPU state (regs) */
+    int fp_stuff_size;		/* Size of it */
+    int c_ucode;		/* Exception no. from u_code */
+  };
+
+/* byte-swap in the Sun-3 core structure */
+static void
+swapcore_sun3 (abfd, ext, intcore)
+     bfd *abfd;
+     char *ext;
+     struct internal_sunos_core *intcore;
+{
+  struct external_sun3_core *extcore = (struct external_sun3_core *) ext;
+
+  intcore->c_magic = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_magic);
+  intcore->c_len = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_len);
+  intcore->c_regs_pos = (long) (((struct external_sun3_core *) 0)->c_regs);
+  intcore->c_regs_size = sizeof (extcore->c_regs);
+#if ARCH_SIZE == 64
+  aout_64_swap_exec_header_in
+#else
+  aout_32_swap_exec_header_in
+#endif
+    (abfd, &extcore->c_aouthdr, &intcore->c_aouthdr);
+  intcore->c_signo = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_signo);
+  intcore->c_tsize = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_tsize);
+  intcore->c_dsize = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_dsize);
+  intcore->c_data_addr = N_DATADDR (intcore->c_aouthdr);
+  intcore->c_ssize = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_ssize);
+  memcpy (intcore->c_cmdname, extcore->c_cmdname, sizeof (intcore->c_cmdname));
+  intcore->fp_stuff_pos = (long) (((struct external_sun3_core *) 0)->fp_stuff);
+  /* FP stuff takes up whole rest of struct, except c_ucode. */
+  intcore->fp_stuff_size = intcore->c_len - (sizeof extcore->c_ucode) -
+    (file_ptr) (((struct external_sun3_core *) 0)->fp_stuff);
+  /* Ucode is the last thing in the struct -- just before the end */
+  intcore->c_ucode =
+    bfd_h_get_32 (abfd,
+    intcore->c_len - sizeof (extcore->c_ucode) + (unsigned char *) extcore);
+  intcore->c_stacktop = 0x0E000000;	/* By experimentation */
+}
+
+
+/* byte-swap in the Sparc core structure */
+static void
+swapcore_sparc (abfd, ext, intcore)
+     bfd *abfd;
+     char *ext;
+     struct internal_sunos_core *intcore;
+{
+  struct external_sparc_core *extcore = (struct external_sparc_core *) ext;
+
+  intcore->c_magic = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_magic);
+  intcore->c_len = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_len);
+  intcore->c_regs_pos = (long) (((struct external_sparc_core *) 0)->c_regs);
+  intcore->c_regs_size = sizeof (extcore->c_regs);
+#if ARCH_SIZE == 64
+  aout_64_swap_exec_header_in
+#else
+  aout_32_swap_exec_header_in
+#endif
+    (abfd, &extcore->c_aouthdr, &intcore->c_aouthdr);
+  intcore->c_signo = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_signo);
+  intcore->c_tsize = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_tsize);
+  intcore->c_dsize = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_dsize);
+  intcore->c_data_addr = N_DATADDR (intcore->c_aouthdr);
+  intcore->c_ssize = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_ssize);
+  memcpy (intcore->c_cmdname, extcore->c_cmdname, sizeof (intcore->c_cmdname));
+  intcore->fp_stuff_pos = (long) (((struct external_sparc_core *) 0)->fp_stuff);
+  /* FP stuff takes up whole rest of struct, except c_ucode. */
+  intcore->fp_stuff_size = intcore->c_len - (sizeof extcore->c_ucode) -
+    (file_ptr) (((struct external_sparc_core *) 0)->fp_stuff);
+  /* Ucode is the last thing in the struct -- just before the end */
+  intcore->c_ucode =
+    bfd_h_get_32 (abfd,
+    intcore->c_len - sizeof (extcore->c_ucode) + (unsigned char *) extcore);
+
+  /* Supposedly the user stack grows downward from the bottom of kernel memory.
+     Presuming that this remains true, this definition will work.  */
+  /* Now sun has provided us with another challenge.  The value is different
+     for sparc2 and sparc10 (both running SunOS 4.1.3).  We pick one or
+     the other based on the current value of the stack pointer.  This
+     loses (a) if the stack pointer has been clobbered, or (b) if the stack
+     is larger than 128 megabytes.
+
+     It's times like these you're glad they're switching to ELF.
+
+     Note that using include files or nlist on /vmunix would be wrong,
+     because we want the value for this core file, no matter what kind of
+     machine we were compiled on or are running on.  */
+#define SPARC_USRSTACK_SPARC2 ((bfd_vma)0xf8000000)
+#define SPARC_USRSTACK_SPARC10 ((bfd_vma)0xf0000000)
+  {
+    bfd_vma sp = bfd_h_get_32
+    (abfd, (unsigned char *) &((struct regs *) &extcore->c_regs[0])->r_o6);
+    if (sp < SPARC_USRSTACK_SPARC10)
+      intcore->c_stacktop = SPARC_USRSTACK_SPARC10;
+    else
+      intcore->c_stacktop = SPARC_USRSTACK_SPARC2;
+  }
+}
+
+/* byte-swap in the Solaris BCP core structure */
+static void
+swapcore_solaris_bcp (abfd, ext, intcore)
+     bfd *abfd;
+     char *ext;
+     struct internal_sunos_core *intcore;
+{
+  struct external_solaris_bcp_core *extcore =
+    (struct external_solaris_bcp_core *) ext;
+
+  intcore->c_magic = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_magic);
+  intcore->c_len = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_len);
+  intcore->c_regs_pos = (long) (((struct external_solaris_bcp_core *) 0)->c_regs);
+  intcore->c_regs_size = sizeof (extcore->c_regs);
+
+  /* The Solaris BCP exdata structure does not contain an a_syms field,
+     so we are unable to synthesize an internal exec header.
+     Luckily we are able to figure out the start address of the data section,
+     which is the only thing needed from the internal exec header,
+     from the exdata structure.
+
+     As of Solaris 2.3, BCP core files for statically linked executables
+     are buggy. The exdata structure is not properly filled in, and
+     the data section is written from address zero instead of the data
+     start address.  */
+  memset ((PTR) &intcore->c_aouthdr, 0, sizeof (struct internal_exec));
+  intcore->c_data_addr =
+    bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_exdata_datorg);
+  intcore->c_signo = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_signo);
+  intcore->c_tsize = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_tsize);
+  intcore->c_dsize = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_dsize);
+  intcore->c_ssize = bfd_h_get_32 (abfd, (unsigned char *) &extcore->c_ssize);
+  memcpy (intcore->c_cmdname, extcore->c_cmdname, sizeof (intcore->c_cmdname));
+  intcore->fp_stuff_pos =
+    (long) (((struct external_solaris_bcp_core *) 0)->fp_stuff);
+  /* FP stuff takes up whole rest of struct, except c_ucode. */
+  intcore->fp_stuff_size = intcore->c_len - (sizeof extcore->c_ucode) -
+    (file_ptr) (((struct external_solaris_bcp_core *) 0)->fp_stuff);
+  /* Ucode is the last thing in the struct -- just before the end */
+  intcore->c_ucode =
+    bfd_h_get_32 (abfd,
+    intcore->c_len - sizeof (extcore->c_ucode) + (unsigned char *) extcore);
+
+  /* Supposedly the user stack grows downward from the bottom of kernel memory.
+     Presuming that this remains true, this definition will work.  */
+  /* Now sun has provided us with another challenge.  The value is different
+     for sparc2 and sparc10 (both running SunOS 4.1.3).  We pick one or
+     the other based on the current value of the stack pointer.  This
+     loses (a) if the stack pointer has been clobbered, or (b) if the stack
+     is larger than 128 megabytes.
+
+     It's times like these you're glad they're switching to ELF.
+
+     Note that using include files or nlist on /vmunix would be wrong,
+     because we want the value for this core file, no matter what kind of
+     machine we were compiled on or are running on.  */
+#define SPARC_USRSTACK_SPARC2 ((bfd_vma)0xf8000000)
+#define SPARC_USRSTACK_SPARC10 ((bfd_vma)0xf0000000)
+  {
+    bfd_vma sp = bfd_h_get_32
+    (abfd, (unsigned char *) &((struct regs *) &extcore->c_regs[0])->r_o6);
+    if (sp < SPARC_USRSTACK_SPARC10)
+      intcore->c_stacktop = SPARC_USRSTACK_SPARC10;
+    else
+      intcore->c_stacktop = SPARC_USRSTACK_SPARC2;
+  }
+}
+
+/* need this cast because ptr is really void * */
+#define core_hdr(bfd) ((bfd)->tdata.sun_core_data)
+#define core_datasec(bfd) (core_hdr(bfd)->data_section)
+#define core_stacksec(bfd) (core_hdr(bfd)->stack_section)
+#define core_regsec(bfd) (core_hdr(bfd)->reg_section)
+#define core_reg2sec(bfd) (core_hdr(bfd)->reg2_section)
+
+/* These are stored in the bfd's tdata */
+struct sun_core_struct
+{
+  struct internal_sunos_core *hdr;	/* core file header */
+  asection *data_section;
+  asection *stack_section;
+  asection *reg_section;
+  asection *reg2_section;
+};
+
+static const bfd_target *
+sunos4_core_file_p (abfd)
+     bfd *abfd;
+{
+  unsigned char longbuf[4];	/* Raw bytes of various header fields */
+  bfd_size_type core_size;
+  unsigned long core_mag;
+  struct internal_sunos_core *core;
+  char *extcore;
+  struct mergem
+    {
+      struct sun_core_struct suncoredata;
+      struct internal_sunos_core internal_sunos_core;
+      char external_core[1];
+    }
+   *mergem;
+
+  if (bfd_read ((PTR) longbuf, 1, sizeof (longbuf), abfd) !=
+      sizeof (longbuf))
+    return 0;
+  core_mag = bfd_h_get_32 (abfd, longbuf);
+
+  if (core_mag != CORE_MAGIC)
+    return 0;
+
+  /* SunOS core headers can vary in length; second word is size; */
+  if (bfd_read ((PTR) longbuf, 1, sizeof (longbuf), abfd) !=
+      sizeof (longbuf))
+    return 0;
+  core_size = bfd_h_get_32 (abfd, longbuf);
+  /* Sanity check */
+  if (core_size > 20000)
+    return 0;
+
+  if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) < 0)
+    return 0;
+
+  mergem = (struct mergem *) bfd_zalloc (abfd, core_size + sizeof (struct mergem));
+  if (mergem == NULL)
+    return 0;
+
+  extcore = mergem->external_core;
+
+  if ((bfd_read ((PTR) extcore, 1, core_size, abfd)) != core_size)
+    {
+      bfd_release (abfd, (char *) mergem);
+      return 0;
+    }
+
+  /* Validate that it's a core file we know how to handle, due to sun
+     botching the positioning of registers and other fields in a machine
+     dependent way.  */
+  core = &mergem->internal_sunos_core;
+  switch (core_size)
+    {
+    case SPARC_CORE_LEN:
+      swapcore_sparc (abfd, extcore, core);
+      break;
+    case SUN3_CORE_LEN:
+      swapcore_sun3 (abfd, extcore, core);
+      break;
+    case SOLARIS_BCP_CORE_LEN:
+      swapcore_solaris_bcp (abfd, extcore, core);
+      break;
+    default:
+      bfd_set_error (bfd_error_system_call);	/* FIXME */
+      bfd_release (abfd, (char *) mergem);
+      return 0;
+    }
+
+  abfd->tdata.sun_core_data = &mergem->suncoredata;
+  abfd->tdata.sun_core_data->hdr = core;
+
+  /* create the sections.  This is raunchy, but bfd_close wants to reclaim
+     them */
+  core_stacksec (abfd) = (asection *) bfd_zalloc (abfd, sizeof (asection));
+  if (core_stacksec (abfd) == NULL)
+    {
+    loser:
+      bfd_release (abfd, (char *) mergem);
+      return 0;
+    }
+  core_datasec (abfd) = (asection *) bfd_zalloc (abfd, sizeof (asection));
+  if (core_datasec (abfd) == NULL)
+    {
+    loser1:
+      bfd_release (abfd, core_stacksec (abfd));
+      goto loser;
+    }
+  core_regsec (abfd) = (asection *) bfd_zalloc (abfd, sizeof (asection));
+  if (core_regsec (abfd) == NULL)
+    {
+    loser2:
+      bfd_release (abfd, core_datasec (abfd));
+      goto loser1;
+    }
+  core_reg2sec (abfd) = (asection *) bfd_zalloc (abfd, sizeof (asection));
+  if (core_reg2sec (abfd) == NULL)
+    {
+      bfd_release (abfd, core_regsec (abfd));
+      goto loser2;
+    }
+
+  core_stacksec (abfd)->name = ".stack";
+  core_datasec (abfd)->name = ".data";
+  core_regsec (abfd)->name = ".reg";
+  core_reg2sec (abfd)->name = ".reg2";
+
+  core_stacksec (abfd)->flags = SEC_ALLOC + SEC_LOAD + SEC_HAS_CONTENTS;
+  core_datasec (abfd)->flags = SEC_ALLOC + SEC_LOAD + SEC_HAS_CONTENTS;
+  core_regsec (abfd)->flags = SEC_HAS_CONTENTS;
+  core_reg2sec (abfd)->flags = SEC_HAS_CONTENTS;
+
+  core_stacksec (abfd)->_raw_size = core->c_ssize;
+  core_datasec (abfd)->_raw_size = core->c_dsize;
+  core_regsec (abfd)->_raw_size = core->c_regs_size;
+  core_reg2sec (abfd)->_raw_size = core->fp_stuff_size;
+
+  core_stacksec (abfd)->vma = (core->c_stacktop - core->c_ssize);
+  core_datasec (abfd)->vma = core->c_data_addr;
+  core_regsec (abfd)->vma = 0;
+  core_reg2sec (abfd)->vma = 0;
+
+  core_stacksec (abfd)->filepos = core->c_len + core->c_dsize;
+  core_datasec (abfd)->filepos = core->c_len;
+  /* We'll access the regs afresh in the core file, like any section: */
+  core_regsec (abfd)->filepos = (file_ptr) core->c_regs_pos;
+  core_reg2sec (abfd)->filepos = (file_ptr) core->fp_stuff_pos;
+
+  /* Align to word at least */
+  core_stacksec (abfd)->alignment_power = 2;
+  core_datasec (abfd)->alignment_power = 2;
+  core_regsec (abfd)->alignment_power = 2;
+  core_reg2sec (abfd)->alignment_power = 2;
+
+  abfd->sections = core_stacksec (abfd);
+  core_stacksec (abfd)->next = core_datasec (abfd);
+  core_datasec (abfd)->next = core_regsec (abfd);
+  core_regsec (abfd)->next = core_reg2sec (abfd);
+
+  abfd->section_count = 4;
+
+  return abfd->xvec;
+}
+
+static char *
+sunos4_core_file_failing_command (abfd)
+     bfd *abfd;
+{
+  return core_hdr (abfd)->hdr->c_cmdname;
+}
+
+static int
+sunos4_core_file_failing_signal (abfd)
+     bfd *abfd;
+{
+  return core_hdr (abfd)->hdr->c_signo;
+}
+
+static boolean
+sunos4_core_file_matches_executable_p (core_bfd, exec_bfd)
+     bfd *core_bfd;
+     bfd *exec_bfd;
+{
+  if (core_bfd->xvec != exec_bfd->xvec)
+    {
+      bfd_set_error (bfd_error_system_call);
+      return false;
+    }
+
+  /* Solaris core files do not include an aouthdr. */
+  if ((core_hdr (core_bfd)->hdr)->c_len == SOLARIS_BCP_CORE_LEN)
+    return true;
+
+  return (memcmp ((char *) &((core_hdr (core_bfd)->hdr)->c_aouthdr),
+		  (char *) exec_hdr (exec_bfd),
+		  sizeof (struct internal_exec)) == 0) ? true : false;
+}
+
+#define MY_set_sizes sunos4_set_sizes
+static boolean
+sunos4_set_sizes (abfd)
+     bfd *abfd;
+{
+  switch (bfd_get_arch (abfd))
+    {
+    default:
+      return false;
+    case bfd_arch_sparc:
+      adata (abfd).page_size = 0x2000;
+      adata (abfd).segment_size = 0x2000;
+      adata (abfd).exec_bytes_size = EXEC_BYTES_SIZE;
+      return true;
+    case bfd_arch_m68k:
+      adata (abfd).page_size = 0x2000;
+      adata (abfd).segment_size = 0x20000;
+      adata (abfd).exec_bytes_size = EXEC_BYTES_SIZE;
+      return true;
+    }
+}
+
+/* We default to setting the toolversion field to 1, as is required by
+   SunOS.  */
+#ifndef MY_exec_hdr_flags
+#define MY_exec_hdr_flags 1
+#endif
+
+#ifndef MY_add_dynamic_symbols
+#define MY_add_dynamic_symbols 0
+#endif
+#ifndef MY_add_one_symbol
+#define MY_add_one_symbol 0
+#endif
+#ifndef MY_link_dynamic_object
+#define MY_link_dynamic_object 0
+#endif
+#ifndef MY_write_dynamic_symbol
+#define MY_write_dynamic_symbol 0
+#endif
+#ifndef MY_check_dynamic_reloc
+#define MY_check_dynamic_reloc 0
+#endif
+#ifndef MY_finish_dynamic_link
+#define MY_finish_dynamic_link 0
+#endif
+
+static CONST struct aout_backend_data sunos4_aout_backend =
+{
+  0,				/* zmagic files are not contiguous */
+  1,				/* text includes header */
+  MY_exec_hdr_flags,
+  0,				/* default text vma */
+  sunos4_set_sizes,
+  0,				/* header is counted in zmagic text */
+  MY_add_dynamic_symbols,
+  MY_add_one_symbol,
+  MY_link_dynamic_object,
+  MY_write_dynamic_symbol,
+  MY_check_dynamic_reloc,
+  MY_finish_dynamic_link
+};
+
+#define	MY_core_file_failing_command 	sunos4_core_file_failing_command
+#define	MY_core_file_failing_signal	sunos4_core_file_failing_signal
+#define	MY_core_file_matches_executable_p sunos4_core_file_matches_executable_p
+
+#define MY_bfd_debug_info_start		bfd_void
+#define MY_bfd_debug_info_end		bfd_void
+#define MY_bfd_debug_info_accumulate	\
+			(void (*) PARAMS ((bfd *, struct sec *))) bfd_void
+#define MY_core_file_p			sunos4_core_file_p
+#define MY_write_object_contents	NAME(aout,sunos4_write_object_contents)
+#define MY_backend_data			&sunos4_aout_backend
+
+#define TARGET_IS_BIG_ENDIAN_P
+
+#include "aout-target.h"
@@ -1,5 +1,5 @@
 /* BFD back-end for archive files (libraries).
-   Copyright 1990, 91, 92, 93, 94 Free Software Foundation, Inc.
+   Copyright 1990, 91, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
   Written by Cygnus Support.  Mostly Gumby Henkel-Wallace's fault.

 This file is part of BFD, the Binary File Descriptor library.
@@ -16,7 +16,7 @@ GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

 /*
@setfilename archive-info
@@ -175,15 +175,9 @@ static char *get_extended_arelt_filename PARAMS ((bfd *arch,
 						  const char *name));
 static boolean do_slurp_bsd_armap PARAMS ((bfd *abfd));
 static boolean do_slurp_coff_armap PARAMS ((bfd *abfd));
-static const char *normalize PARAMS ((const char *file));
-static boolean bfd_construct_extended_name_table PARAMS ((bfd *abfd,
-							  char **tabloc,
-							  unsigned int *));
+static const char *normalize PARAMS ((bfd *, const char *file));
 static struct areltdata *bfd_ar_hdr_from_filesystem PARAMS ((bfd *abfd,
 							     const char *));
-static boolean compute_and_write_armap PARAMS ((bfd *arch,
-						unsigned int elength));
-static boolean bsd_update_armap_timestamp PARAMS ((bfd *arch));

 boolean
 _bfd_generic_mkarchive (abfd)
@@ -193,10 +187,7 @@ _bfd_generic_mkarchive (abfd)
 			      bfd_zalloc (abfd, sizeof (struct artdata)));

  if (bfd_ardata (abfd) == NULL)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      return false;
-    }
+    return false;

  bfd_ardata (abfd)->cache = NULL;
  bfd_ardata (abfd)->archive_head = NULL;
@@ -242,7 +233,9 @@ bfd_get_next_mapent (abfd, prev, entry)

  if (prev == BFD_NO_MORE_SYMBOLS)
    prev = 0;
-  else if (++prev >= bfd_ardata (abfd)->symdef_count)
+  else
+    ++prev;
+  if (prev >= bfd_ardata (abfd)->symdef_count)
    return BFD_NO_MORE_SYMBOLS;

  *entry = (bfd_ardata (abfd)->symdefs + prev);
@@ -255,15 +248,7 @@ bfd *
 _bfd_create_empty_archive_element_shell (obfd)
     bfd *obfd;
 {
-  bfd *nbfd;
-
-  nbfd = _bfd_new_bfd_contained_in (obfd);
-  if (nbfd == NULL)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      return NULL;
-    }
-  return nbfd;
+  return _bfd_new_bfd_contained_in (obfd);
 }

 /*
@@ -314,10 +299,7 @@ _bfd_add_bfd_to_archive_cache (arch_bfd, filepos, new_elt)
 					    sizeof (struct ar_cache)));

  if (new_cache == NULL)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      return false;
-    }
+    return false;

  new_cache->ptr = filepos;
  new_cache->arelt = new_elt;
@@ -369,14 +351,21 @@ get_extended_arelt_filename (arch, name)
   could have been moved arbitrarily.
 */

-struct areltdata *
-_bfd_snarf_ar_hdr (abfd)
+PTR
+_bfd_generic_read_ar_hdr (abfd)
     bfd *abfd;
 {
-#ifndef errno
-  extern int errno;
-#endif
+  return _bfd_generic_read_ar_hdr_mag (abfd, (const char *) NULL);
+}

+/* Alpha ECOFF uses an optional different ARFMAG value, so we have a
+   variant of _bfd_generic_read_ar_hdr which accepts a magic string.  */
+
+PTR
+_bfd_generic_read_ar_hdr_mag (abfd, mag)
+     bfd *abfd;
+     const char *mag;
+{
  struct ar_hdr hdr;
  char *hdrp = (char *) &hdr;
  unsigned int parsed_size;
@@ -393,7 +382,9 @@ _bfd_snarf_ar_hdr (abfd)
 	bfd_set_error (bfd_error_no_more_archived_files);
      return NULL;
    }
-  if (strncmp (hdr.ar_fmag, ARFMAG, 2))
+  if (strncmp (hdr.ar_fmag, ARFMAG, 2) != 0
+      && (mag == NULL
+	  || strncmp (hdr.ar_fmag, mag, 2) != 0))
    {
      bfd_set_error (bfd_error_malformed_archive);
      return NULL;
@@ -434,10 +425,7 @@ _bfd_snarf_ar_hdr (abfd)

      allocptr = bfd_zalloc (abfd, allocsize);
      if (allocptr == NULL)
-	{
-	  bfd_set_error (bfd_error_no_memory);
-	  return NULL;
-	}
+	return NULL;
      filename = (allocptr
 		  + sizeof (struct areltdata)
 		  + sizeof (struct ar_hdr));
@@ -477,10 +465,7 @@ _bfd_snarf_ar_hdr (abfd)
    {
      allocptr = bfd_zalloc (abfd, allocsize);
      if (allocptr == NULL)
-	{
-	  bfd_set_error (bfd_error_no_memory);
-	  return NULL;
-	}
+	return NULL;
    }

  ared = (struct areltdata *) allocptr;
@@ -500,7 +485,7 @@ _bfd_snarf_ar_hdr (abfd)
      ared->filename[namelen] = '\0';
    }

-  return ared;
+  return (PTR) ared;
 }

 /* This is an internal function; it's mainly used when indexing
@@ -522,7 +507,7 @@ _bfd_get_elt_at_filepos (archive, filepos)
  if (0 > bfd_seek (archive, filepos, SEEK_SET))
    return NULL;

-  if ((new_areldata = _bfd_snarf_ar_hdr (archive)) == NULL)
+  if ((new_areldata = (struct areltdata *) _bfd_read_ar_hdr (archive)) == NULL)
    return NULL;

  n_nfd = _bfd_create_empty_archive_element_shell (archive);
@@ -545,23 +530,13 @@ _bfd_get_elt_at_filepos (archive, filepos)
  return NULL;
 }

-/*
-FUNCTION
-	bfd_get_elt_at_index
+/* Return the BFD which is referenced by the symbol in ABFD indexed by
+   INDEX.  INDEX should have been returned by bfd_get_next_mapent.  */

-SYNOPSIS
-	bfd *bfd_get_elt_at_index(bfd *archive, int index);
-
-DESCRIPTION
-	Return the BFD which is referenced by the symbol in @var{archive}
-	indexed by @var{index}.  @var{index} should have been returned by
-	<<bfd_get_next_mapent>> (q.v.).
-
-*/
 bfd *
-bfd_get_elt_at_index (abfd, index)
+_bfd_generic_get_elt_at_index (abfd, index)
     bfd *abfd;
-     int index;
+     symindex index;
 {
  carsym *entry;

@@ -631,8 +606,11 @@ const bfd_target *
 bfd_generic_archive_p (abfd)
     bfd *abfd;
 {
+  struct artdata *tdata_hold;
  char armag[SARMAG + 1];

+  tdata_hold = abfd->tdata.aout_ar_data;
+
  if (bfd_read ((PTR) armag, 1, SARMAG, abfd) != SARMAG)
    {
      if (bfd_get_error () != bfd_error_system_call)
@@ -655,10 +633,7 @@ bfd_generic_archive_p (abfd)
 			      bfd_zalloc (abfd, sizeof (struct artdata)));

  if (bfd_ardata (abfd) == NULL)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      return NULL;
-    }
+    return NULL;

  bfd_ardata (abfd)->first_file_filepos = SARMAG;
  bfd_ardata (abfd)->cache = NULL;
@@ -670,17 +645,54 @@ bfd_generic_archive_p (abfd)
  if (!BFD_SEND (abfd, _bfd_slurp_armap, (abfd)))
    {
      bfd_release (abfd, bfd_ardata (abfd));
-      abfd->tdata.aout_ar_data = NULL;
+      abfd->tdata.aout_ar_data = tdata_hold;
      return NULL;
    }

  if (!BFD_SEND (abfd, _bfd_slurp_extended_name_table, (abfd)))
    {
      bfd_release (abfd, bfd_ardata (abfd));
-      abfd->tdata.aout_ar_data = NULL;
+      abfd->tdata.aout_ar_data = tdata_hold;
      return NULL;
    }

+  if (bfd_has_map (abfd))
+    {
+      bfd *first;
+
+      /* This archive has a map, so we may presume that the contents
+	 are object files.  Make sure that if the first file in the
+	 archive can be recognized as an object file, it is for this
+	 target.  If not, assume that this is the wrong format.  If
+	 the first file is not an object file, somebody is doing
+	 something weird, and we permit it so that ar -t will work.
+
+	 This is done because any normal format will recognize any
+	 normal archive, regardless of the format of the object files.
+	 We do accept an empty archive.  */
+
+      first = bfd_openr_next_archived_file (abfd, (bfd *) NULL);
+      if (first != NULL)
+	{
+	  boolean fail;
+
+	  first->target_defaulted = false;
+	  fail = false;
+	  if (bfd_check_format (first, bfd_object)
+	      && first->xvec != abfd->xvec)
+	    {
+	      (void) bfd_close (first);
+	      bfd_release (abfd, bfd_ardata (abfd));
+	      abfd->tdata.aout_ar_data = tdata_hold;
+	      bfd_set_error (bfd_error_wrong_format);
+	      return NULL;
+	    }
+
+	  /* We ought to close first here, but we can't, because we
+             have no way to remove it from the archive cache.  FIXME.  */
+	}
+    }
+
  return abfd->xvec;
 }

@@ -715,7 +727,7 @@ do_slurp_bsd_armap (abfd)
  unsigned int parsed_size;
  carsym *set;

-  mapdata = _bfd_snarf_ar_hdr (abfd);
+  mapdata = (struct areltdata *) _bfd_read_ar_hdr (abfd);
  if (mapdata == NULL)
    return false;
  parsed_size = mapdata->parsed_size;
@@ -723,10 +735,7 @@ do_slurp_bsd_armap (abfd)

  raw_armap = (bfd_byte *) bfd_zalloc (abfd, parsed_size);
  if (raw_armap == (bfd_byte *) NULL)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      return false;
-    }
+    return false;

  if (bfd_read ((PTR) raw_armap, 1, parsed_size, abfd) != parsed_size)
    {
@@ -756,10 +765,7 @@ do_slurp_bsd_armap (abfd)
 					  (ardata->symdef_count
 					   * sizeof (carsym)));
  if (!ardata->symdefs)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      return false;
-    }
+    return false;

  for (counter = 0, set = ardata->symdefs;
       counter < ardata->symdef_count;
@@ -796,7 +802,7 @@ do_slurp_coff_armap (abfd)
  char int_buf[sizeof (long)];
  unsigned int carsym_size, ptrsize, i;

-  mapdata = _bfd_snarf_ar_hdr (abfd);
+  mapdata = (struct areltdata *) _bfd_read_ar_hdr (abfd);
  if (mapdata == NULL)
    return false;
  parsed_size = mapdata->parsed_size;
@@ -837,20 +843,14 @@ do_slurp_coff_armap (abfd)

  ardata->symdefs = (carsym *) bfd_zalloc (abfd, carsym_size + stringsize + 1);
  if (ardata->symdefs == NULL)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      return false;
-    }
+    return false;
  carsyms = ardata->symdefs;
  stringbase = ((char *) ardata->symdefs) + carsym_size;

  /* Allocate and read in the raw offsets. */
  raw_armap = (int *) bfd_alloc (abfd, ptrsize);
  if (raw_armap == NULL)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      goto release_symdefs;
-    }
+    goto release_symdefs;
  if (bfd_read ((PTR) raw_armap, 1, ptrsize, abfd) != ptrsize
      || bfd_read ((PTR) stringbase, 1, stringsize, abfd) != stringsize)
    {
@@ -875,8 +875,29 @@ do_slurp_coff_armap (abfd)
  /* Pad to an even boundary if you have to */
  ardata->first_file_filepos += (ardata->first_file_filepos) % 2;

+
  bfd_has_map (abfd) = true;
  bfd_release (abfd, (PTR) raw_armap);
+
+
+  /* Check for a second archive header (as used by PE) */
+  {
+    struct areltdata *tmp;
+
+    bfd_seek (abfd,   ardata->first_file_filepos, SEEK_SET);
+    tmp = (struct areltdata *) _bfd_read_ar_hdr (abfd);
+    if (tmp != NULL) 
+      {
+	if (tmp->arch_header[0] == '/'
+	    && tmp->arch_header[1] == ' ') 
+	  {
+	    ardata->first_file_filepos +=
+	      (tmp->parsed_size + sizeof(struct ar_hdr) + 1) & ~1;
+	  }
+	bfd_release (abfd, tmp);
+      }
+  }
+
  return true;

 release_raw_armap:
@@ -954,14 +975,13 @@ bfd_slurp_bsd_armap_f2 (abfd)
      return true;
    }

-  mapdata = _bfd_snarf_ar_hdr (abfd);
+  mapdata = (struct areltdata *) _bfd_read_ar_hdr (abfd);
  if (mapdata == NULL)
    return false;

  raw_armap = (bfd_byte *) bfd_zalloc (abfd, mapdata->parsed_size);
  if (raw_armap == NULL)
    {
-      bfd_set_error (bfd_error_no_memory);
    byebye:
      bfd_release (abfd, (PTR) mapdata);
      return false;
@@ -999,10 +1019,7 @@ bfd_slurp_bsd_armap_f2 (abfd)
 					  (ardata->symdef_count
 					   * BSD_SYMDEF_SIZE));
  if (!ardata->symdefs)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      return false;
-    }
+    return false;

  for (counter = 0, set = ardata->symdefs;
       counter < ardata->symdef_count;
@@ -1042,9 +1059,9 @@ _bfd_slurp_extended_name_table (abfd)

  /* FIXME:  Formatting sucks here, and in case of failure of BFD_READ,
     we probably don't want to return true.  */
+  bfd_seek (abfd, bfd_ardata (abfd)->first_file_filepos, SEEK_SET);
  if (bfd_read ((PTR) nextname, 1, 16, abfd) == 16)
    {
-
      if (bfd_seek (abfd, (file_ptr) - 16, SEEK_CUR) != 0)
 	return false;

@@ -1055,7 +1072,7 @@ _bfd_slurp_extended_name_table (abfd)
 	  return true;
 	}

-      namedata = _bfd_snarf_ar_hdr (abfd);
+      namedata = (struct areltdata *) _bfd_read_ar_hdr (abfd);
      if (namedata == NULL)
 	return false;

@@ -1063,7 +1080,6 @@ _bfd_slurp_extended_name_table (abfd)
 	bfd_zalloc (abfd, namedata->parsed_size);
      if (bfd_ardata (abfd)->extended_names == NULL)
 	{
-	  bfd_set_error (bfd_error_no_memory);
 	byebye:
 	  bfd_release (abfd, (PTR) namedata);
 	  return false;
@@ -1082,13 +1098,17 @@ _bfd_slurp_extended_name_table (abfd)
      /* Since the archive is supposed to be printable if it contains
 	 text, the entries in the list are newline-padded, not null
 	 padded. In SVR4-style archives, the names also have a
-	 trailing '/'.  We'll fix both problems here..  */
+	 trailing '/'.  DOS/NT created archive often have \ in them
+	 We'll fix all problems here..  */
      {
 	char *temp = bfd_ardata (abfd)->extended_names;
 	char *limit = temp + namedata->parsed_size;
-	for (; temp < limit; ++temp)
+	for (; temp < limit; ++temp) {
 	  if (*temp == '\012')
 	    temp[temp[-1] == '/' ? -1 : 0] = '\0';
+	  if (*temp == '\\')
+	    *temp = '/';
+	}
      }

      /* Pad to an even boundary if you have to */
@@ -1108,7 +1128,8 @@ _bfd_slurp_extended_name_table (abfd)
 /* Return a copy of the stuff in the filename between any :]> and a
   semicolon */
 static const char *
-normalize (file)
+normalize (abfd, file)
+     bfd *abfd;
     const char *file;
 {
  CONST char *first;
@@ -1130,10 +1151,9 @@ normalize (file)
      first--;
    }

-
-  copy = malloc (last - first + 1);
-  if (!copy)
-    return copy;
+  copy = (char *) bfd_alloc (abfd, last - first + 1);
+  if (copy == NULL)
+    return NULL;

  memcpy (copy, first, last - first);
  copy[last - first] = 0;
@@ -1143,10 +1163,11 @@ normalize (file)

 #else
 static const char *
-normalize (file)
+normalize (abfd, file)
+     bfd *abfd;
     const char *file;
 {
-  CONST char *filename = strrchr (file, '/');
+  const char *filename = strrchr (file, '/');

  if (filename != (char *) NULL)
    filename++;
@@ -1156,6 +1177,32 @@ normalize (file)
 }
 #endif

+/* Build a BFD style extended name table.  */
+
+boolean
+_bfd_archive_bsd_construct_extended_name_table (abfd, tabloc, tablen, name)
+     bfd *abfd;
+     char **tabloc;
+     bfd_size_type *tablen;
+     const char **name;
+{
+  *name = "ARFILENAMES/";
+  return _bfd_construct_extended_name_table (abfd, false, tabloc, tablen);
+}
+
+/* Build an SVR4 style extended name table.  */
+
+boolean
+_bfd_archive_coff_construct_extended_name_table (abfd, tabloc, tablen, name)
+     bfd *abfd;
+     char **tabloc;
+     bfd_size_type *tablen;
+     const char **name;
+{
+  *name = "//";
+  return _bfd_construct_extended_name_table (abfd, true, tabloc, tablen);
+}
+
 /* Follows archive_head and produces an extended name table if
   necessary.  Returns (in tabloc) a pointer to an extended name
   table, and in tablen the length of the table.  If it makes an entry
@@ -1164,11 +1211,12 @@ normalize (file)
   something went wrong.  A successful return may still involve a
   zero-length tablen!  */

-static boolean
-bfd_construct_extended_name_table (abfd, tabloc, tablen)
+boolean
+_bfd_construct_extended_name_table (abfd, trailing_slash, tabloc, tablen)
     bfd *abfd;
+     boolean trailing_slash;
     char **tabloc;
-     unsigned int *tablen;
+     bfd_size_type *tablen;
 {
  unsigned int maxname = abfd->xvec->ar_max_namelen;
  unsigned int total_namelen = 0;
@@ -1180,17 +1228,44 @@ bfd_construct_extended_name_table (abfd, tabloc, tablen)
  /* Figure out how long the table should be */
  for (current = abfd->archive_head; current != NULL; current = current->next)
    {
-      CONST char *normal = normalize (current->filename);
+      const char *normal;
      unsigned int thislen;

-      if (!normal)
-	{
-	  bfd_set_error (bfd_error_no_memory);
-	  return false;
-	}
+      normal = normalize (current, current->filename);
+      if (normal == NULL)
+	return false;
+
      thislen = strlen (normal);
+
+      if (thislen > maxname
+	  && (bfd_get_file_flags (abfd) & BFD_TRADITIONAL_FORMAT) != 0)
+	thislen = maxname;
+
      if (thislen > maxname)
-	total_namelen += thislen + 1;	/* leave room for \n */
+	{
+	  /* Add one to leave room for \n.  */
+	  total_namelen += thislen + 1;
+	  if (trailing_slash)
+	    {
+	      /* Leave room for trailing slash.  */
+	      ++total_namelen;
+	    }
+	}
+      else
+	{
+	  struct ar_hdr *hdr = arch_hdr (current);
+	  if (strncmp (normal, hdr->ar_name, thislen) != 0
+	      || (thislen < sizeof hdr->ar_name
+		  && hdr->ar_name[thislen] != ar_padchar (current)))
+	    {
+	      /* Must have been using extended format even though it
+	         didn't need to.  Fix it to use normal format.  */
+	      memcpy (hdr->ar_name, normal, thislen);
+	      if (thislen < maxname
+		  || (thislen == maxname && thislen < sizeof hdr->ar_name))
+		hdr->ar_name[thislen] = ar_padchar (current);
+	    }
+	}
    }

  if (total_namelen == 0)
@@ -1198,10 +1273,7 @@ bfd_construct_extended_name_table (abfd, tabloc, tablen)

  *tabloc = bfd_zalloc (abfd, total_namelen);
  if (*tabloc == NULL)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      return false;
-    }
+    return false;

  *tablen = total_namelen;
  strptr = *tabloc;
@@ -1209,14 +1281,13 @@ bfd_construct_extended_name_table (abfd, tabloc, tablen)
  for (current = abfd->archive_head; current != NULL; current =
       current->next)
    {
-      CONST char *normal = normalize (current->filename);
+      const char *normal;
      unsigned int thislen;

-      if (!normal)
-	{
-	  bfd_set_error (bfd_error_no_memory);
-	  return false;
-	}
+      normal = normalize (current, current->filename);
+      if (normal == NULL)
+	return false;
+
      thislen = strlen (normal);
      if (thislen > maxname)
 	{
@@ -1225,7 +1296,13 @@ bfd_construct_extended_name_table (abfd, tabloc, tablen)
 	     generalise this hack. */
 	  struct ar_hdr *hdr = arch_hdr (current);
 	  strcpy (strptr, normal);
-	  strptr[thislen] = '\012';
+	  if (! trailing_slash)
+	    strptr[thislen] = '\012';
+	  else
+	    {
+	      strptr[thislen] = '/';
+	      strptr[thislen + 1] = '\012';
+	    }
 	  hdr->ar_name[0] = ar_padchar (current);
 	  /* We know there will always be enough room (one of the few
 	     cases where you may safely use sprintf). */
@@ -1239,6 +1316,8 @@ bfd_construct_extended_name_table (abfd, tabloc, tablen)
 		*temp = ' ';
 	  }
 	  strptr += thislen + 1;
+	  if (trailing_slash)
+	    ++strptr;
 	}
    }

@@ -1270,10 +1349,7 @@ bfd_ar_hdr_from_filesystem (abfd, filename)
  ared = (struct areltdata *) bfd_zalloc (abfd, sizeof (struct ar_hdr) +
 					  sizeof (struct areltdata));
  if (ared == NULL)
-    {
-      bfd_set_error (bfd_error_no_memory);
-      return NULL;
-    }
+    return NULL;
  hdr = (struct ar_hdr *) (((char *) ared) + sizeof (struct areltdata));

  /* ar headers are space padded, not null padded! */
@@ -1364,16 +1440,31 @@ bfd_dont_truncate_arname (abfd, pathname, arhdr)
     intel's release is out the door. */

  struct ar_hdr *hdr = (struct ar_hdr *) arhdr;
-  int length;
-  CONST char *filename = normalize (pathname);
-  int maxlen = ar_maxnamelen (abfd);
+  size_t length;
+  const char *filename;
+  size_t maxlen = ar_maxnamelen (abfd);
+
+  if ((bfd_get_file_flags (abfd) & BFD_TRADITIONAL_FORMAT) != 0)
+    {
+      bfd_bsd_truncate_arname (abfd, pathname, arhdr);
+      return;
+    }
+
+  filename = normalize (abfd, pathname);
+  if (filename == NULL)
+    {
+      /* FIXME */
+      abort ();
+    }

  length = strlen (filename);

  if (length <= maxlen)
    memcpy (hdr->ar_name, filename, length);

-  if (length < maxlen)
+  /* Add the padding character if there is room for it.  */
+  if (length < maxlen
+      || (length == maxlen && length < sizeof hdr->ar_name))
    (hdr->ar_name)[length] = ar_padchar (abfd);
 }

@@ -1460,7 +1551,8 @@ _bfd_write_archive_contents (arch)
 {
  bfd *current;
  char *etable = NULL;
-  unsigned int elength = 0;
+  bfd_size_type elength = 0;
+  const char *ename = NULL;
  boolean makemap = bfd_has_map (arch);
  boolean hasobjects = false;	/* if no .o's, don't bother to make a map */
  bfd_size_type wrote;
@@ -1501,7 +1593,8 @@ _bfd_write_archive_contents (arch)
 	}
    }

-  if (!bfd_construct_extended_name_table (arch, &etable, &elength))
+  if (!BFD_SEND (arch, _bfd_construct_extended_name_table,
+		 (arch, &etable, &elength, &ename)))
    return false;

  if (bfd_seek (arch, (file_ptr) 0, SEEK_SET) != 0)
@@ -1516,7 +1609,7 @@ _bfd_write_archive_contents (arch)

  if (makemap && hasobjects)
    {
-      if (compute_and_write_armap (arch, elength) != true)
+      if (_bfd_compute_and_write_armap (arch, elength) != true)
 	return false;
    }

@@ -1525,11 +1618,10 @@ _bfd_write_archive_contents (arch)
      struct ar_hdr hdr;

      memset ((char *) (&hdr), 0, sizeof (struct ar_hdr));
-      if (ar_padchar (arch) == '/')
-	sprintf (&(hdr.ar_name[0]), "//");
-      else
-	sprintf (&(hdr.ar_name[0]), "ARFILENAMES/");
-      sprintf (&(hdr.ar_size[0]), "%-10d", (int) elength);
+      strcpy (hdr.ar_name, ename);
+      /* Round size up to even number in archive header.  */
+      sprintf (&(hdr.ar_size[0]), "%-10d",
+	       (int) ((elength + 1) & ~1));
      strncpy (hdr.ar_fmag, ARFMAG, 2);
      for (i = 0; i < sizeof (struct ar_hdr); i++)
 	if (((char *) (&hdr))[i] == '\0')
@@ -1579,44 +1671,32 @@ _bfd_write_archive_contents (arch)
 	}
    }

-  /* Verify the timestamp in the archive file.  If it would not be
-     accepted by the linker, rewrite it until it would be.  If
-     anything odd happens, break out and just return.  (The Berkeley
-     linker checks the timestamp and refuses to read the
-     table-of-contents if it is >60 seconds less than the file's
-     modified-time.  That painful hack requires this painful hack.  */
-
-  tries = 1;
-  do
+  if (makemap && hasobjects)
    {
-      /* FIXME!  This kludge is to avoid adding a member to the xvec,
-	 while generating a small patch for Adobe.  FIXME!  The
-	 update_armap_timestamp function call should be in the xvec,
-	 thus:
-
-		if (bfd_update_armap_timestamp (arch) == true) break;
-                     ^
-
-         Instead, we check whether in a BSD archive, and call
-         directly. */
-
-      if (arch->xvec->write_armap != bsd_write_armap)
-	break;
-      if (bsd_update_armap_timestamp (arch) == true) /* FIXME!!!  Vector it */
-	break;
-      if (tries > 0)
-	fprintf (stderr,
-		 "Warning: writing archive was slow: rewriting timestamp\n");
+      /* Verify the timestamp in the archive file.  If it would not be
+	 accepted by the linker, rewrite it until it would be.  If
+	 anything odd happens, break out and just return.  (The
+	 Berkeley linker checks the timestamp and refuses to read the
+	 table-of-contents if it is >60 seconds less than the file's
+	 modified-time.  That painful hack requires this painful hack.  */
+      tries = 1;
+      do
+	{
+	  if (bfd_update_armap_timestamp (arch))
+	    break;
+	  (*_bfd_error_handler)
+	    ("Warning: writing archive was slow: rewriting timestamp\n");
+	}
+      while (++tries < 6);
    }
-  while (++tries < 6);

  return true;
 }

 /* Note that the namidx for the first symbol is 0 */

-static boolean
-compute_and_write_armap (arch, elength)
+boolean
+_bfd_compute_and_write_armap (arch, elength)
     bfd *arch;
     unsigned int elength;
 {
@@ -1636,15 +1716,15 @@ compute_and_write_armap (arch, elength)
    elength += sizeof (struct ar_hdr);
  elength += elength % 2;

-  map = (struct orl *) malloc (orl_max * sizeof (struct orl));
+  map = (struct orl *) bfd_malloc (orl_max * sizeof (struct orl));
  if (map == NULL)
-    goto no_memory_return;
+    goto error_return;

  /* We put the symbol names on the arch obstack, and then discard
     them when done.  */
  first_name = bfd_alloc (arch, 1);
  if (first_name == NULL)
-    goto no_memory_return;
+    goto error_return;

  /* Drop all the files called __.SYMDEF, we're going to make our
     own */
@@ -1675,9 +1755,9 @@ compute_and_write_armap (arch, elength)
 		  if (syms_max > 0)
 		    free (syms);
 		  syms_max = storage;
-		  syms = (asymbol **) malloc ((size_t) syms_max);
+		  syms = (asymbol **) bfd_malloc ((size_t) syms_max);
 		  if (syms == NULL)
-		    goto no_memory_return;
+		    goto error_return;
 		}
 	      symcount = bfd_canonicalize_symtab (current, syms);
 	      if (symcount < 0)
@@ -1702,11 +1782,11 @@ compute_and_write_armap (arch, elength)
 		      if (orl_count == orl_max)
 			{
 			  orl_max *= 2;
-			  new_map = ((struct orl *)
-				     realloc ((PTR) map,
-					      orl_max * sizeof (struct orl)));
+			  new_map =
+			    ((struct orl *)
+			     bfd_realloc (map, orl_max * sizeof (struct orl)));
 			  if (new_map == (struct orl *) NULL)
-			    goto no_memory_return;
+			    goto error_return;

 			  map = new_map;
 			}
@@ -1716,10 +1796,10 @@ compute_and_write_armap (arch, elength)
 					     bfd_alloc (arch,
 							sizeof (char *)));
 		      if (map[orl_count].name == NULL)
-			goto no_memory_return;
+			goto error_return;
 		      *(map[orl_count].name) = bfd_alloc (arch, namelen + 1);
 		      if (*(map[orl_count].name) == NULL)
-			goto no_memory_return;
+			goto error_return;
 		      strcpy (*(map[orl_count].name), syms[src_count]->name);
 		      (map[orl_count]).pos = (file_ptr) current;
 		      (map[orl_count]).namidx = stridx;
@@ -1750,9 +1830,6 @@ compute_and_write_armap (arch, elength)

  return ret;

- no_memory_return:
-  bfd_set_error (bfd_error_no_memory);
-
 error_return:
  if (syms_max > 0)
    free (syms);
@@ -1773,15 +1850,15 @@ bsd_write_armap (arch, elength, map, orl_count, stridx)
     int stridx;
 {
  int padit = stridx & 1;
-  unsigned int ranlibsize = orl_count * sizeof (struct ranlib);
+  unsigned int ranlibsize = orl_count * BSD_SYMDEF_SIZE;
  unsigned int stringsize = stridx + padit;
  /* Include 8 bytes to store ranlibsize and stringsize in output. */
  unsigned int mapsize = ranlibsize + stringsize + 8;
  file_ptr firstreal;
  bfd *current = arch->archive_head;
  bfd *last_elt = current;	/* last element arch seen */
-  int temp;
-  int count;
+  bfd_byte temp[4];
+  unsigned int count;
  struct ar_hdr hdr;
  struct stat statbuf;
  unsigned int i;
@@ -1796,8 +1873,8 @@ bsd_write_armap (arch, elength, map, orl_count, stridx)
  bfd_ardata (arch)->armap_datepos = (SARMAG
 				      + offsetof (struct ar_hdr, ar_date[0]));
  sprintf (hdr.ar_date, "%ld", bfd_ardata (arch)->armap_timestamp);
-  sprintf (hdr.ar_uid, "%d", getuid ());
-  sprintf (hdr.ar_gid, "%d", getgid ());
+  sprintf (hdr.ar_uid, "%ld", (long) getuid ());
+  sprintf (hdr.ar_gid, "%ld", (long) getgid ());
  sprintf (hdr.ar_size, "%-10d", (int) mapsize);
  strncpy (hdr.ar_fmag, ARFMAG, 2);
  for (i = 0; i < sizeof (struct ar_hdr); i++)
@@ -1806,14 +1883,13 @@ bsd_write_armap (arch, elength, map, orl_count, stridx)
  if (bfd_write ((char *) &hdr, 1, sizeof (struct ar_hdr), arch)
      != sizeof (struct ar_hdr))
    return false;
-  bfd_h_put_32 (arch, (bfd_vma) ranlibsize, (PTR) &temp);
-  if (bfd_write (&temp, 1, sizeof (temp), arch) != sizeof (temp))
+  bfd_h_put_32 (arch, (bfd_vma) ranlibsize, temp);
+  if (bfd_write (temp, 1, sizeof (temp), arch) != sizeof (temp))
    return false;

  for (count = 0; count < orl_count; count++)
    {
-      struct symdef outs;
-      struct symdef *outp = &outs;
+      bfd_byte buf[BSD_SYMDEF_SIZE];

      if (((bfd *) (map[count]).pos) != last_elt)
 	{
@@ -1827,15 +1903,15 @@ bsd_write_armap (arch, elength, map, orl_count, stridx)
 	}			/* if new archive element */

      last_elt = current;
-      bfd_h_put_32 (arch, ((map[count]).namidx), (PTR) &outs.s.string_offset);
-      bfd_h_put_32 (arch, firstreal, (PTR) &outs.file_offset);
-      if (bfd_write ((char *) outp, 1, sizeof (outs), arch) != sizeof (outs))
+      bfd_h_put_32 (arch, map[count].namidx, buf);
+      bfd_h_put_32 (arch, firstreal, buf + BSD_SYMDEF_OFFSET_SIZE);
+      if (bfd_write (buf, BSD_SYMDEF_SIZE, 1, arch) != BSD_SYMDEF_SIZE)
 	return false;
    }

  /* now write the strings themselves */
-  bfd_h_put_32 (arch, stringsize, (PTR) &temp);
-  if (bfd_write ((PTR) &temp, 1, sizeof (temp), arch) != sizeof (temp))
+  bfd_h_put_32 (arch, stringsize, temp);
+  if (bfd_write (temp, 1, sizeof (temp), arch) != sizeof (temp))
    return false;
  for (count = 0; count < orl_count; count++)
    {
@@ -1862,13 +1938,13 @@ bsd_write_armap (arch, elength, map, orl_count, stridx)
   Return true if the timestamp was OK, or an unusual problem happened.
   Return false if we updated the timestamp.  */

-static boolean
-bsd_update_armap_timestamp (arch)
+boolean
+_bfd_archive_bsd_update_armap_timestamp (arch)
     bfd *arch;
 {
  struct stat archstat;
  struct ar_hdr hdr;
-  int i;
+  unsigned int i;

  /* Flush writes, get last-write timestamp from file, and compare it
     to the timestamp IN the file.  */
@@ -1892,6 +1968,8 @@ bsd_update_armap_timestamp (arch)
      (hdr.ar_date)[i] = ' ';

  /* Write it into the file.  */
+  bfd_ardata (arch)->armap_datepos = (SARMAG
+				      + offsetof (struct ar_hdr, ar_date[0]));
  if (bfd_seek (arch, bfd_ardata (arch)->armap_datepos, SEEK_SET) != 0
      || (bfd_write (hdr.ar_date, sizeof (hdr.ar_date), 1, arch)
 	  != sizeof (hdr.ar_date)))
@@ -1933,7 +2011,7 @@ coff_write_armap (arch, elength, map, symbol_count, stridx)
  unsigned int mapsize = stringsize + ranlibsize;
  file_ptr archive_member_file_ptr;
  bfd *current = arch->archive_head;
-  int count;
+  unsigned int count;
  struct ar_hdr hdr;
  unsigned int i;
  int padit = mapsize & 1;
@@ -0,0 +1,720 @@
+/* BFD library support routines for architectures.
+   Copyright (C) 1990, 91, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
+   Hacked by John Gilmore and Steve Chamberlain of Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include <ctype.h>
+
+/*
+
+SECTION
+	Architectures
+
+	BFD keeps one atom in a BFD describing the
+	architecture of the data attached to the BFD: a pointer to a
+	<<bfd_arch_info_type>>.  
+
+	Pointers to structures can be requested independently of a BFD
+	so that an architecture's information can be interrogated
+	without access to an open BFD.
+
+	The architecture information is provided by each architecture package.
+	The set of default architectures is selected by the macro
+	<<SELECT_ARCHITECTURES>>.  This is normally set up in the
+	@file{config/@var{target}.mt} file of your choice.  If the name is not
+	defined, then all the architectures supported are included. 
+
+	When BFD starts up, all the architectures are called with an
+	initialize method.  It is up to the architecture back end to
+	insert as many items into the list of architectures as it wants to;
+	generally this would be one for each machine and one for the
+	default case (an item with a machine field of 0). 
+
+	BFD's idea of an architecture is implemented in	@file{archures.c}.
+*/
+
+/*
+
+SUBSECTION
+	bfd_architecture
+
+DESCRIPTION
+	This enum gives the object file's CPU architecture, in a
+	global sense---i.e., what processor family does it belong to?
+	Another field indicates which processor within
+	the family is in use.  The machine gives a number which
+	distinguishes different versions of the architecture,
+	containing, for example, 2 and 3 for Intel i960 KA and i960 KB,
+	and 68020 and 68030 for Motorola 68020 and 68030. 
+
+.enum bfd_architecture 
+.{
+.  bfd_arch_unknown,   {* File arch not known *}
+.  bfd_arch_obscure,   {* Arch known, not one of these *}
+.  bfd_arch_m68k,      {* Motorola 68xxx *}
+.  bfd_arch_vax,       {* DEC Vax *}   
+.  bfd_arch_i960,      {* Intel 960 *}
+.    {* The order of the following is important.
+.       lower number indicates a machine type that 
+.       only accepts a subset of the instructions
+.       available to machines with higher numbers.
+.       The exception is the "ca", which is
+.       incompatible with all other machines except 
+.       "core". *}
+.
+.#define bfd_mach_i960_core      1
+.#define bfd_mach_i960_ka_sa     2
+.#define bfd_mach_i960_kb_sb     3
+.#define bfd_mach_i960_mc        4
+.#define bfd_mach_i960_xa        5
+.#define bfd_mach_i960_ca        6
+.#define bfd_mach_i960_jx	 7
+.#define bfd_mach_i960_hx        8
+.
+.  bfd_arch_a29k,      {* AMD 29000 *}
+.  bfd_arch_sparc,     {* SPARC *}
+.#define bfd_mach_sparc			1
+.{* The difference between v8plus and v9 is that v9 is a true 64 bit env.  *}
+.#define bfd_mach_sparc_v8plus		2
+.#define bfd_mach_sparc_v8plusa		3 {* with ultrasparc add'ns *}
+.#define bfd_mach_sparc_v9		4
+.#define bfd_mach_sparc_v9a		5 {* with ultrasparc add'ns *}
+.{* Nonzero if MACH has the v9 instruction set.  *}
+.#define bfd_mach_sparc_v9_p(mach) ((mach) != bfd_mach_sparc)
+.  bfd_arch_mips,      {* MIPS Rxxxx *}
+.  bfd_arch_i386,      {* Intel 386 *}
+.  bfd_arch_we32k,     {* AT&T WE32xxx *}
+.  bfd_arch_tahoe,     {* CCI/Harris Tahoe *}
+.  bfd_arch_i860,      {* Intel 860 *}
+.  bfd_arch_romp,      {* IBM ROMP PC/RT *}
+.  bfd_arch_alliant,   {* Alliant *}
+.  bfd_arch_convex,    {* Convex *}
+.  bfd_arch_m88k,      {* Motorola 88xxx *}
+.  bfd_arch_pyramid,   {* Pyramid Technology *}
+.  bfd_arch_h8300,     {* Hitachi H8/300 *}
+.#define bfd_mach_h8300   1
+.#define bfd_mach_h8300h  2
+.  bfd_arch_powerpc,   {* PowerPC *}
+.  bfd_arch_rs6000,    {* IBM RS/6000 *}
+.  bfd_arch_hppa,      {* HP PA RISC *}
+.  bfd_arch_z8k,       {* Zilog Z8000 *}
+.#define bfd_mach_z8001		1
+.#define bfd_mach_z8002		2
+.  bfd_arch_h8500,     {* Hitachi H8/500 *}
+.  bfd_arch_sh,        {* Hitachi SH *}
+.  bfd_arch_alpha,     {* Dec Alpha *}
+.  bfd_arch_arm,       {* Advanced Risc Machines ARM *}
+.  bfd_arch_ns32k,     {* National Semiconductors ns32000 *}
+.  bfd_arch_w65,       {* WDC 65816 *}
+.  bfd_arch_last
+.  };
+
+
+*/
+
+/*
+
+SUBSECTION
+	bfd_arch_info
+
+DESCRIPTION
+	This structure contains information on architectures for use
+	within BFD.
+
+.
+.typedef struct bfd_arch_info 
+.{
+.  int bits_per_word;
+.  int bits_per_address;
+.  int bits_per_byte;
+.  enum bfd_architecture arch;
+.  unsigned long mach;
+.  const char *arch_name;
+.  const char *printable_name;
+.  unsigned int section_align_power;
+. {* true if this is the default machine for the architecture *}
+.  boolean the_default;	
+.  const struct bfd_arch_info * (*compatible)
+.	PARAMS ((const struct bfd_arch_info *a,
+.	         const struct bfd_arch_info *b));
+.
+.  boolean (*scan) PARAMS ((const struct bfd_arch_info *, const char *));
+.
+.  const struct bfd_arch_info *next;
+.} bfd_arch_info_type;
+*/
+
+extern const bfd_arch_info_type bfd_a29k_arch;
+extern const bfd_arch_info_type bfd_alpha_arch;
+extern const bfd_arch_info_type bfd_arm_arch;
+extern const bfd_arch_info_type bfd_h8300_arch;
+extern const bfd_arch_info_type bfd_h8500_arch;
+extern const bfd_arch_info_type bfd_hppa_arch;
+extern const bfd_arch_info_type bfd_i386_arch;
+extern const bfd_arch_info_type bfd_i860_arch;
+extern const bfd_arch_info_type bfd_i960_arch;
+extern const bfd_arch_info_type bfd_m68k_arch;
+extern const bfd_arch_info_type bfd_m88k_arch;
+extern const bfd_arch_info_type bfd_mips_arch;
+extern const bfd_arch_info_type bfd_powerpc_arch;
+extern const bfd_arch_info_type bfd_rs6000_arch;
+extern const bfd_arch_info_type bfd_sh_arch;
+extern const bfd_arch_info_type bfd_sparc_arch;
+extern const bfd_arch_info_type bfd_vax_arch;
+extern const bfd_arch_info_type bfd_we32k_arch;
+extern const bfd_arch_info_type bfd_z8k_arch;
+extern const bfd_arch_info_type bfd_ns32k_arch;
+extern const bfd_arch_info_type bfd_w65_arch;
+
+static const bfd_arch_info_type * const bfd_archures_list[] =
+{
+#ifdef SELECT_ARCHITECTURES
+  SELECT_ARCHITECTURES,
+#else
+  &bfd_a29k_arch,
+  &bfd_alpha_arch,
+  &bfd_arm_arch,
+  &bfd_h8300_arch,
+  &bfd_h8500_arch,
+  &bfd_hppa_arch,
+  &bfd_i386_arch,
+  &bfd_i860_arch,
+  &bfd_i960_arch,
+  &bfd_m68k_arch,
+  &bfd_m88k_arch,
+  &bfd_mips_arch,
+  &bfd_powerpc_arch,
+  &bfd_rs6000_arch,
+  &bfd_sh_arch,
+  &bfd_sparc_arch,
+  &bfd_vax_arch,
+  &bfd_we32k_arch,
+  &bfd_z8k_arch,
+  &bfd_ns32k_arch,
+  &bfd_w65_arch,
+#endif
+  0
+};
+
+/*
+FUNCTION
+	bfd_printable_name
+
+SYNOPSIS
+	const char *bfd_printable_name(bfd *abfd);
+
+DESCRIPTION
+	Return a printable string representing the architecture and machine
+	from the pointer to the architecture info structure.
+
+*/
+
+const char *
+bfd_printable_name (abfd)
+     bfd *abfd;
+{
+  return abfd->arch_info->printable_name;
+}
+
+
+
+/*
+FUNCTION
+	bfd_scan_arch
+
+SYNOPSIS
+	const bfd_arch_info_type *bfd_scan_arch(const char *string);
+
+DESCRIPTION
+	Figure out if BFD supports any cpu which could be described with
+	the name @var{string}.  Return a pointer to an <<arch_info>>
+	structure if a machine is found, otherwise NULL.
+
+*/
+
+const bfd_arch_info_type *
+bfd_scan_arch (string)
+     const char *string;
+{
+  const bfd_arch_info_type * const *app, *ap;
+
+  /* Look through all the installed architectures */
+  for (app = bfd_archures_list; *app != NULL; app++)
+    {
+      for (ap = *app; ap != NULL; ap = ap->next)
+	{
+	  if (ap->scan (ap, string))
+	    return ap;
+	}
+    }
+
+  return NULL;
+}
+
+
+
+/*
+FUNCTION
+	bfd_arch_get_compatible
+
+SYNOPSIS
+	const bfd_arch_info_type *bfd_arch_get_compatible(
+		const bfd *abfd,
+	        const bfd *bbfd);
+
+DESCRIPTION
+	Determine whether two BFDs'
+	architectures and machine types are compatible.  Calculates
+	the lowest common denominator between the two architectures
+	and machine types implied by the BFDs and returns a pointer to
+	an <<arch_info>> structure describing the compatible machine.
+*/
+
+const bfd_arch_info_type *
+bfd_arch_get_compatible (abfd, bbfd)
+     const bfd *abfd;
+     const bfd *bbfd;
+{
+  /* If either architecture is unknown, then all we can do is assume
+     the user knows what he's doing.  */
+  if (abfd->arch_info->arch == bfd_arch_unknown)
+  	return bbfd->arch_info;
+  if (bbfd->arch_info->arch == bfd_arch_unknown)
+  	return abfd->arch_info;
+
+  /* Otherwise architecture-specific code has to decide.  */
+  return abfd->arch_info->compatible (abfd->arch_info, bbfd->arch_info);
+}
+
+
+/*
+INTERNAL_DEFINITION
+	bfd_default_arch_struct
+
+DESCRIPTION
+	The <<bfd_default_arch_struct>> is an item of
+	<<bfd_arch_info_type>> which has been initialized to a fairly
+	generic state.  A BFD starts life by pointing to this
+	structure, until the correct back end has determined the real
+	architecture of the file.
+
+.extern const bfd_arch_info_type bfd_default_arch_struct;
+
+*/
+
+const bfd_arch_info_type bfd_default_arch_struct =
+{
+    32,32,8,bfd_arch_unknown,0,"unknown","unknown",2,true,
+    bfd_default_compatible,
+    bfd_default_scan, 
+    0,
+};
+
+/*
+FUNCTION
+	bfd_set_arch_info
+
+SYNOPSIS
+	void bfd_set_arch_info(bfd *abfd, const bfd_arch_info_type *arg);
+
+DESCRIPTION
+	Set the architecture info of @var{abfd} to @var{arg}.
+*/
+
+void
+bfd_set_arch_info (abfd, arg)
+     bfd *abfd;
+     const bfd_arch_info_type *arg;
+{
+  abfd->arch_info = arg;
+}
+
+/*
+INTERNAL_FUNCTION
+	bfd_default_set_arch_mach
+
+SYNOPSIS
+	boolean bfd_default_set_arch_mach(bfd *abfd,
+		enum bfd_architecture arch,
+		unsigned long mach);
+
+DESCRIPTION
+	Set the architecture and machine type in BFD @var{abfd}
+	to @var{arch} and @var{mach}.  Find the correct
+	pointer to a structure and insert it into the <<arch_info>>
+	pointer. 
+*/
+
+boolean
+bfd_default_set_arch_mach (abfd, arch, mach)
+     bfd *abfd;
+     enum bfd_architecture arch;
+     unsigned long mach;
+{
+  const bfd_arch_info_type * const *app, *ap;
+
+  for (app = bfd_archures_list; *app != NULL; app++)
+    {
+      for (ap = *app; ap != NULL; ap = ap->next)
+	{
+	  if (ap->arch == arch
+	      && (ap->mach == mach
+		  || (mach == 0 && ap->the_default)))
+	    {
+	      abfd->arch_info = ap;
+	      return true;
+	    }
+	}
+    }
+
+  abfd->arch_info = &bfd_default_arch_struct;
+  bfd_set_error (bfd_error_bad_value);
+  return false;
+}
+
+
+/*
+FUNCTION
+	bfd_get_arch
+
+SYNOPSIS
+	enum bfd_architecture bfd_get_arch(bfd *abfd);
+
+DESCRIPTION
+	Return the enumerated type which describes the BFD @var{abfd}'s
+	architecture.
+
+*/
+
+enum bfd_architecture
+bfd_get_arch (abfd)
+     bfd *abfd;
+{
+    return abfd->arch_info->arch;
+}
+
+/*
+FUNCTION
+	bfd_get_mach
+
+SYNOPSIS
+	unsigned long bfd_get_mach(bfd *abfd);
+
+DESCRIPTION
+	Return the long type which describes the BFD @var{abfd}'s
+	machine.
+*/
+
+unsigned long  
+bfd_get_mach (abfd)
+     bfd *abfd;
+{
+    return abfd->arch_info->mach;
+}
+
+/*
+FUNCTION
+	bfd_arch_bits_per_byte
+
+SYNOPSIS
+	unsigned int bfd_arch_bits_per_byte(bfd *abfd);
+
+DESCRIPTION
+	Return the number of bits in one of the BFD @var{abfd}'s
+	architecture's bytes.
+
+*/
+
+unsigned int
+bfd_arch_bits_per_byte (abfd)
+     bfd *abfd;
+{
+  return abfd->arch_info->bits_per_byte;
+}
+
+/*
+FUNCTION
+	bfd_arch_bits_per_address
+
+SYNOPSIS
+	unsigned int bfd_arch_bits_per_address(bfd *abfd);
+
+DESCRIPTION
+	Return the number of bits in one of the BFD @var{abfd}'s
+	architecture's addresses.
+*/
+
+unsigned int
+bfd_arch_bits_per_address (abfd)
+     bfd *abfd;
+{
+  return abfd->arch_info->bits_per_address;
+}
+
+
+/*
+INTERNAL_FUNCTION 
+	bfd_default_compatible
+
+SYNOPSIS
+	const bfd_arch_info_type *bfd_default_compatible
+	(const bfd_arch_info_type *a,
+	const bfd_arch_info_type *b);
+
+DESCRIPTION
+	The default function for testing for compatibility.
+*/
+
+const bfd_arch_info_type *
+bfd_default_compatible (a,b)
+     const bfd_arch_info_type *a;
+     const bfd_arch_info_type *b;
+{
+  if (a->arch != b->arch)
+    return NULL;
+
+  if (a->mach > b->mach)
+    return a;
+
+  if (b->mach > a->mach)
+    return b;
+
+  return a;
+}
+
+
+/*
+INTERNAL_FUNCTION
+	bfd_default_scan
+
+SYNOPSIS
+	boolean bfd_default_scan(const struct bfd_arch_info *info, const char *string);
+
+DESCRIPTION
+	The default function for working out whether this is an
+	architecture hit and a machine hit.
+*/
+
+boolean 
+bfd_default_scan (info, string)
+     const struct bfd_arch_info *info;
+     const char *string;
+{
+  const char *ptr_src;
+  const char *ptr_tst;
+  unsigned long number;
+  enum bfd_architecture arch;
+
+  /* First test for an exact match */
+  if (strcmp (string, info->printable_name) == 0)
+    return true;
+
+  /* See how much of the supplied string matches with the
+     architecture, eg the string m68k:68020 would match the 68k entry
+     up to the :, then we get left with the machine number */
+
+  for (ptr_src = string, ptr_tst = info->arch_name; 
+       *ptr_src && *ptr_tst;
+       ptr_src++, ptr_tst++) 
+    {
+      if (*ptr_src != *ptr_tst) break;
+    }
+
+  /* Chewed up as much of the architecture as will match, skip any
+     colons */
+  if (*ptr_src == ':')
+    ptr_src++;
+  
+  if (*ptr_src == 0)
+    {
+      /* nothing more, then only keep this one if it is the default
+	 machine for this architecture */
+      return info->the_default;
+    }
+
+  number = 0;
+  while (isdigit(*ptr_src))
+    {
+      number = number * 10 + *ptr_src  - '0';
+      ptr_src++;
+    }
+
+  switch (number) 
+    {
+    case 65:
+      arch = bfd_arch_w65;
+      break;
+
+    case 300:
+      arch = bfd_arch_h8300;
+      break;
+
+    case 500:
+      arch = bfd_arch_h8500;
+      break;
+
+    case 68010:
+    case 68020:
+    case 68030:
+    case 68040:
+    case 68332:
+    case 68050:        
+    case 68000: 
+      arch = bfd_arch_m68k; 
+      break;
+
+    case 386: 
+    case 80386:
+    case 486:
+    case 80486:
+      arch = bfd_arch_i386;
+      break;
+
+    case 29000: 
+      arch = bfd_arch_a29k;
+      break;
+
+    case 8000:
+      arch = bfd_arch_z8k;
+      break;
+
+    case 32000:
+      arch = bfd_arch_we32k;
+      break;
+
+    case 860:
+    case 80860: 
+      arch = bfd_arch_i860; 
+      break;
+    case 960:
+    case 80960:
+      arch = bfd_arch_i960;
+      break;
+
+    case 2000:
+    case 3000:
+    case 4000:
+    case 4400:
+      arch = bfd_arch_mips;
+      break;
+
+    case 6000:
+      arch = bfd_arch_rs6000;
+      break;
+
+    default:  
+      return false;
+    }
+
+  if (arch != info->arch) 
+    return false;
+
+  if (number != info->mach)
+    return false;
+
+  return true;
+}
+
+
+/*
+FUNCTION
+	bfd_get_arch_info
+
+SYNOPSIS
+	const bfd_arch_info_type * bfd_get_arch_info(bfd *abfd);
+
+DESCRIPTION
+	Return the architecture info struct in @var{abfd}.
+*/
+
+const bfd_arch_info_type *
+bfd_get_arch_info (abfd)
+     bfd *abfd;
+{
+  return abfd->arch_info;
+}
+
+
+/*
+FUNCTION
+	bfd_lookup_arch
+
+SYNOPSIS
+	const bfd_arch_info_type *bfd_lookup_arch
+		(enum bfd_architecture
+		arch,
+		unsigned long machine);
+
+DESCRIPTION
+	Look for the architecure info structure which matches the
+	arguments @var{arch} and @var{machine}. A machine of 0 matches the
+	machine/architecture structure which marks itself as the
+	default.
+*/
+
+const bfd_arch_info_type * 
+bfd_lookup_arch (arch, machine)
+     enum bfd_architecture arch;
+     unsigned long machine;
+{
+  const bfd_arch_info_type * const *app, *ap;
+
+  for (app = bfd_archures_list; *app != NULL; app++)
+    {
+      for (ap = *app; ap != NULL; ap = ap->next)
+	{
+	  if (ap->arch == arch
+	      && (ap->mach == machine
+		  || (machine == 0 && ap->the_default)))
+	    return ap;
+	}
+    }
+
+  return NULL;
+}
+
+
+/*
+FUNCTION
+	bfd_printable_arch_mach
+
+SYNOPSIS
+	const char *bfd_printable_arch_mach
+		(enum bfd_architecture arch, unsigned long machine);
+
+DESCRIPTION
+	Return a printable string representing the architecture and
+	machine type. 
+
+	This routine is depreciated.
+*/
+
+const char *
+bfd_printable_arch_mach (arch, machine)
+     enum bfd_architecture arch;
+     unsigned long machine;
+{
+    const bfd_arch_info_type *ap = bfd_lookup_arch (arch, machine);
+
+    if (ap)
+      return ap->printable_name;
+    return "UNKNOWN!";
+}
@@ -0,0 +1,668 @@
+/* Main header file for the bfd library -- portable access to object files.
+   Copyright 1990, 91, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+** NOTE: bfd.h and bfd-in2.h are GENERATED files.  Don't change them;
+** instead, change bfd-in.h or the other BFD source files processed to
+** generate these files.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* bfd.h -- The only header file required by users of the bfd library 
+
+The bfd.h file is generated from bfd-in.h and various .c files; if you
+change it, your changes will probably be lost.
+
+All the prototypes and definitions following the comment "THE FOLLOWING
+IS EXTRACTED FROM THE SOURCE" are extracted from the source files for
+BFD.  If you change it, someone oneday will extract it from the source
+again, and your changes will be lost.  To save yourself from this bind,
+change the definitions in the source in the bfd directory.  Type "make
+docs" and then "make headers" in that directory, and magically this file
+will change to reflect your changes.
+
+If you don't have the tools to perform the extraction, then you are
+safe from someone on your system trampling over your header files.
+You should still maintain the equivalence between the source and this
+file though; every change you make to the .c file should be reflected
+here.  */
+
+#ifndef __BFD_H_SEEN__
+#define __BFD_H_SEEN__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "ansidecl.h"
+#include "obstack.h"
+
+/* These two lines get substitutions done by commands in Makefile.in.  */
+#define BFD_VERSION  "@VERSION@"
+#define BFD_ARCH_SIZE @WORDSIZE@
+#define BFD_HOST_64BIT_LONG @BFD_HOST_64BIT_LONG@
+
+#if BFD_ARCH_SIZE >= 64
+#define BFD64
+#endif
+
+#ifndef INLINE
+#if __GNUC__ >= 2
+#define INLINE __inline__
+#else
+#define INLINE
+#endif
+#endif
+
+/* forward declaration */
+typedef struct _bfd bfd;
+
+/* To squelch erroneous compiler warnings ("illegal pointer
+   combination") from the SVR3 compiler, we would like to typedef
+   boolean to int (it doesn't like functions which return boolean.
+   Making sure they are never implicitly declared to return int
+   doesn't seem to help).  But this file is not configured based on
+   the host.  */
+/* General rules: functions which are boolean return true on success
+   and false on failure (unless they're a predicate).   -- bfd.doc */
+/* I'm sure this is going to break something and someone is going to
+   force me to change it. */
+/* typedef enum boolean {false, true} boolean; */
+/* Yup, SVR4 has a "typedef enum boolean" in <sys/types.h>  -fnf */
+/* It gets worse if the host also defines a true/false enum... -sts */
+/* And even worse if your compiler has built-in boolean types... -law */
+#if defined (__GNUG__) && (__GNUC_MINOR__ > 5)
+#define TRUE_FALSE_ALREADY_DEFINED
+#endif
+#ifdef MPW
+/* Pre-emptive strike - get the file with the enum. */
+#include <Types.h>
+#define TRUE_FALSE_ALREADY_DEFINED
+#endif /* MPW */
+#ifndef TRUE_FALSE_ALREADY_DEFINED
+typedef enum bfd_boolean {false, true} boolean;
+#define BFD_TRUE_FALSE
+#else
+/* Use enum names that will appear nowhere else.  */
+typedef enum bfd_boolean {bfd_fffalse, bfd_tttrue} boolean;
+#endif
+
+/* A pointer to a position in a file.  */
+/* FIXME:  This should be using off_t from <sys/types.h>.
+   For now, try to avoid breaking stuff by not including <sys/types.h> here.
+   This will break on systems with 64-bit file offsets (e.g. 4.4BSD).
+   Probably the best long-term answer is to avoid using file_ptr AND off_t 
+   in this header file, and to handle this in the BFD implementation
+   rather than in its interface.  */
+/* typedef off_t	file_ptr; */
+typedef long int file_ptr;
+
+/* Support for different sizes of target format ints and addresses.
+   If the type `long' is at least 64 bits, BFD_HOST_64BIT_LONG will be
+   set to 1 above.  Otherwise, if gcc is being used, this code will
+   use gcc's "long long" type.  Otherwise, the compilation will fail
+   if 64-bit targets are requested.  */
+
+#ifdef BFD64
+
+#ifndef BFD_HOST_64_BIT
+#if BFD_HOST_64BIT_LONG
+#define BFD_HOST_64_BIT long
+#else
+#ifdef __GNUC__
+#define BFD_HOST_64_BIT long long
+#endif /* defined (__GNUC__) */
+#endif /* ! BFD_HOST_64BIT_LONG */
+#endif /* ! defined (BFD_HOST_64_BIT) */
+
+typedef unsigned BFD_HOST_64_BIT bfd_vma;
+typedef BFD_HOST_64_BIT bfd_signed_vma;
+typedef unsigned BFD_HOST_64_BIT bfd_size_type;
+typedef unsigned BFD_HOST_64_BIT symvalue;
+
+#ifndef fprintf_vma
+#if BFD_HOST_64BIT_LONG
+#define sprintf_vma(s,x) sprintf (s, "%016lx", x)
+#define fprintf_vma(f,x) fprintf (f, "%016lx", x)
+#else
+#define _bfd_int64_low(x) ((unsigned long) (((x) & 0xffffffff)))
+#define _bfd_int64_high(x) ((unsigned long) (((x) >> 32) & 0xffffffff))
+#define fprintf_vma(s,x) \
+  fprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x))
+#define sprintf_vma(s,x) \
+  sprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x))
+#endif
+#endif
+
+#else /* not BFD64  */
+
+/* Represent a target address.  Also used as a generic unsigned type
+   which is guaranteed to be big enough to hold any arithmetic types
+   we need to deal with.  */
+typedef unsigned long bfd_vma;
+
+/* A generic signed type which is guaranteed to be big enough to hold any
+   arithmetic types we need to deal with.  Can be assumed to be compatible
+   with bfd_vma in the same way that signed and unsigned ints are compatible
+   (as parameters, in assignment, etc).  */
+typedef long bfd_signed_vma;
+
+typedef unsigned long symvalue;
+typedef unsigned long bfd_size_type;
+
+/* Print a bfd_vma x on stream s.  */
+#define fprintf_vma(s,x) fprintf(s, "%08lx", x)
+#define sprintf_vma(s,x) sprintf(s, "%08lx", x)
+#endif /* not BFD64  */
+#define printf_vma(x) fprintf_vma(stdout,x)
+
+typedef unsigned int flagword;	/* 32 bits of flags */
+typedef unsigned char bfd_byte;
+
+/** File formats */
+
+typedef enum bfd_format {
+	      bfd_unknown = 0,	/* file format is unknown */
+	      bfd_object,	/* linker/assember/compiler output */
+	      bfd_archive,	/* object archive file */
+	      bfd_core,		/* core dump */
+	      bfd_type_end}	/* marks the end; don't use it! */
+         bfd_format;
+
+/* Values that may appear in the flags field of a BFD.  These also
+   appear in the object_flags field of the bfd_target structure, where
+   they indicate the set of flags used by that backend (not all flags
+   are meaningful for all object file formats) (FIXME: at the moment,
+   the object_flags values have mostly just been copied from backend
+   to another, and are not necessarily correct).  */
+
+/* No flags.  */
+#define NO_FLAGS    	0x00
+
+/* BFD contains relocation entries.  */
+#define HAS_RELOC   	0x01
+
+/* BFD is directly executable.  */
+#define EXEC_P      	0x02
+
+/* BFD has line number information (basically used for F_LNNO in a
+   COFF header).  */
+#define HAS_LINENO  	0x04
+
+/* BFD has debugging information.  */
+#define HAS_DEBUG   	0x08
+
+/* BFD has symbols.  */
+#define HAS_SYMS    	0x10
+
+/* BFD has local symbols (basically used for F_LSYMS in a COFF
+   header).  */
+#define HAS_LOCALS  	0x20
+
+/* BFD is a dynamic object.  */
+#define DYNAMIC     	0x40
+
+/* Text section is write protected (if D_PAGED is not set, this is
+   like an a.out NMAGIC file) (the linker sets this by default, but
+   clears it for -r or -N).  */
+#define WP_TEXT     	0x80
+
+/* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
+   linker sets this by default, but clears it for -r or -n or -N).  */
+#define D_PAGED     	0x100
+
+/* BFD is relaxable (this means that bfd_relax_section may be able to
+   do something) (sometimes bfd_relax_section can do something even if
+   this is not set).  */
+#define BFD_IS_RELAXABLE 0x200
+
+/* This may be set before writing out a BFD to request using a
+   traditional format.  For example, this is used to request that when
+   writing out an a.out object the symbols not be hashed to eliminate
+   duplicates.  */
+#define BFD_TRADITIONAL_FORMAT 0x400
+
+/* This flag indicates that the BFD contents are actually cached in
+   memory.  If this is set, iostream points to a bfd_in_memory struct.  */
+#define BFD_IN_MEMORY 0x800
+
+/* symbols and relocation */
+
+/* A count of carsyms (canonical archive symbols).  */
+typedef unsigned long symindex;
+
+/* How to perform a relocation.  */
+typedef const struct reloc_howto_struct reloc_howto_type;
+
+#define BFD_NO_MORE_SYMBOLS ((symindex) ~0)
+
+/* General purpose part of a symbol X;
+   target specific parts are in libcoff.h, libaout.h, etc.  */
+
+#define bfd_get_section(x) ((x)->section)
+#define bfd_get_output_section(x) ((x)->section->output_section)
+#define bfd_set_section(x,y) ((x)->section) = (y)
+#define bfd_asymbol_base(x) ((x)->section->vma)
+#define bfd_asymbol_value(x) (bfd_asymbol_base(x) + (x)->value)
+#define bfd_asymbol_name(x) ((x)->name)
+/*Perhaps future: #define bfd_asymbol_bfd(x) ((x)->section->owner)*/
+#define bfd_asymbol_bfd(x) ((x)->the_bfd)
+#define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour)
+
+/* A canonical archive symbol.  */
+/* This is a type pun with struct ranlib on purpose! */
+typedef struct carsym {
+  char *name;
+  file_ptr file_offset;		/* look here to find the file */
+} carsym;			/* to make these you call a carsymogen */
+
+  
+/* Used in generating armaps (archive tables of contents).
+   Perhaps just a forward definition would do? */
+struct orl {			/* output ranlib */
+  char **name;			/* symbol name */ 
+  file_ptr pos;			/* bfd* or file position */
+  int namidx;			/* index into string table */
+};
+
+
+/* Linenumber stuff */
+typedef struct lineno_cache_entry {
+  unsigned int line_number;	/* Linenumber from start of function*/  
+  union {
+    struct symbol_cache_entry *sym; /* Function name */
+    unsigned long offset;	/* Offset into section */
+  } u;
+} alent;
+
+/* object and core file sections */
+
+#define	align_power(addr, align)	\
+	( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
+
+typedef struct sec *sec_ptr;
+
+#define bfd_get_section_name(bfd, ptr) ((ptr)->name + 0)
+#define bfd_get_section_vma(bfd, ptr) ((ptr)->vma + 0)
+#define bfd_get_section_alignment(bfd, ptr) ((ptr)->alignment_power + 0)
+#define bfd_section_name(bfd, ptr) ((ptr)->name)
+#define bfd_section_size(bfd, ptr) (bfd_get_section_size_before_reloc(ptr))
+#define bfd_section_vma(bfd, ptr) ((ptr)->vma)
+#define bfd_section_alignment(bfd, ptr) ((ptr)->alignment_power)
+#define bfd_get_section_flags(bfd, ptr) ((ptr)->flags + 0)
+#define bfd_get_section_userdata(bfd, ptr) ((ptr)->userdata)
+
+#define bfd_is_com_section(ptr) (((ptr)->flags & SEC_IS_COMMON) != 0)
+
+#define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma= (val)), ((ptr)->user_set_vma = (boolean)true), true)
+#define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true)
+#define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true)
+
+typedef struct stat stat_type; 
+
+typedef enum bfd_print_symbol
+{ 
+  bfd_print_symbol_name,
+  bfd_print_symbol_more,
+  bfd_print_symbol_all
+} bfd_print_symbol_type;
+    
+/* Information about a symbol that nm needs.  */
+
+typedef struct _symbol_info
+{
+  symvalue value;
+  char type;
+  CONST char *name;            /* Symbol name.  */
+  unsigned char stab_type;     /* Stab type.  */
+  char stab_other;             /* Stab other. */
+  short stab_desc;             /* Stab desc.  */
+  CONST char *stab_name;       /* String for stab type.  */
+} symbol_info;
+
+/* Get the name of a stabs type code.  */
+
+extern const char *bfd_get_stab_name PARAMS ((int));
+
+/* Hash table routines.  There is no way to free up a hash table.  */
+
+/* An element in the hash table.  Most uses will actually use a larger
+   structure, and an instance of this will be the first field.  */
+
+struct bfd_hash_entry
+{
+  /* Next entry for this hash code.  */
+  struct bfd_hash_entry *next;
+  /* String being hashed.  */
+  const char *string;
+  /* Hash code.  This is the full hash code, not the index into the
+     table.  */
+  unsigned long hash;
+};
+
+/* A hash table.  */
+
+struct bfd_hash_table
+{
+  /* The hash array.  */
+  struct bfd_hash_entry **table;
+  /* The number of slots in the hash table.  */
+  unsigned int size;
+  /* A function used to create new elements in the hash table.  The
+     first entry is itself a pointer to an element.  When this
+     function is first invoked, this pointer will be NULL.  However,
+     having the pointer permits a hierarchy of method functions to be
+     built each of which calls the function in the superclass.  Thus
+     each function should be written to allocate a new block of memory
+     only if the argument is NULL.  */
+  struct bfd_hash_entry *(*newfunc) PARAMS ((struct bfd_hash_entry *,
+					     struct bfd_hash_table *,
+					     const char *));
+  /* An obstack for this hash table.  */
+  struct obstack memory;
+};
+
+/* Initialize a hash table.  */
+extern boolean bfd_hash_table_init
+  PARAMS ((struct bfd_hash_table *,
+	   struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
+				       struct bfd_hash_table *,
+				       const char *)));
+
+/* Initialize a hash table specifying a size.  */
+extern boolean bfd_hash_table_init_n
+  PARAMS ((struct bfd_hash_table *,
+	   struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
+				       struct bfd_hash_table *,
+				       const char *),
+	   unsigned int size));
+
+/* Free up a hash table.  */
+extern void bfd_hash_table_free PARAMS ((struct bfd_hash_table *));
+
+/* Look up a string in a hash table.  If CREATE is true, a new entry
+   will be created for this string if one does not already exist.  The
+   COPY argument must be true if this routine should copy the string
+   into newly allocated memory when adding an entry.  */
+extern struct bfd_hash_entry *bfd_hash_lookup
+  PARAMS ((struct bfd_hash_table *, const char *, boolean create,
+	   boolean copy));
+
+/* Replace an entry in a hash table.  */
+extern void bfd_hash_replace
+  PARAMS ((struct bfd_hash_table *, struct bfd_hash_entry *old,
+	   struct bfd_hash_entry *nw));
+
+/* Base method for creating a hash table entry.  */
+extern struct bfd_hash_entry *bfd_hash_newfunc
+  PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *,
+	   const char *));
+
+/* Grab some space for a hash table entry.  */
+extern PTR bfd_hash_allocate PARAMS ((struct bfd_hash_table *,
+				      unsigned int));
+
+/* Traverse a hash table in a random order, calling a function on each
+   element.  If the function returns false, the traversal stops.  The
+   INFO argument is passed to the function.  */
+extern void bfd_hash_traverse PARAMS ((struct bfd_hash_table *,
+				       boolean (*) (struct bfd_hash_entry *,
+						    PTR),
+				       PTR info));
+
+/* Semi-portable string concatenation in cpp.
+   The CAT4 hack is to avoid a problem with some strict ANSI C preprocessors.
+   The problem is, "32_" is not a valid preprocessing token, and we don't
+   want extra underscores (e.g., "nlm_32_").  The XCAT2 macro will cause the
+   inner CAT macros to be evaluated first, producing still-valid pp-tokens.
+   Then the final concatenation can be done.  (Sigh.)  */
+#ifndef CAT
+#ifdef SABER
+#define CAT(a,b)	a##b
+#define CAT3(a,b,c)	a##b##c
+#define CAT4(a,b,c,d)	a##b##c##d
+#else
+#if defined(__STDC__) || defined(ALMOST_STDC)
+#define CAT(a,b) a##b
+#define CAT3(a,b,c) a##b##c
+#define XCAT2(a,b)	CAT(a,b)
+#define CAT4(a,b,c,d)	XCAT2(CAT(a,b),CAT(c,d))
+#else
+#define CAT(a,b) a/**/b
+#define CAT3(a,b,c) a/**/b/**/c
+#define CAT4(a,b,c,d)	a/**/b/**/c/**/d
+#endif
+#endif
+#endif
+
+#define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table
+
+/* User program access to BFD facilities */
+
+/* Direct I/O routines, for programs which know more about the object
+   file than BFD does.  Use higher level routines if possible.  */
+
+extern bfd_size_type bfd_read
+  PARAMS ((PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
+extern bfd_size_type bfd_write
+  PARAMS ((const PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
+extern int bfd_seek PARAMS ((bfd *abfd, file_ptr fp, int direction));
+extern long bfd_tell PARAMS ((bfd *abfd));
+extern int bfd_flush PARAMS ((bfd *abfd));
+extern int bfd_stat PARAMS ((bfd *abfd, struct stat *));
+
+
+/* Cast from const char * to char * so that caller can assign to
+   a char * without a warning.  */
+#define bfd_get_filename(abfd) ((char *) (abfd)->filename)
+#define bfd_get_cacheable(abfd) ((abfd)->cacheable)
+#define bfd_get_format(abfd) ((abfd)->format)
+#define bfd_get_target(abfd) ((abfd)->xvec->name)
+#define bfd_get_flavour(abfd) ((abfd)->xvec->flavour)
+#define bfd_big_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_BIG)
+#define bfd_little_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_LITTLE)
+#define bfd_header_big_endian(abfd) \
+  ((abfd)->xvec->header_byteorder == BFD_ENDIAN_BIG)
+#define bfd_header_little_endian(abfd) \
+  ((abfd)->xvec->header_byteorder == BFD_ENDIAN_LITTLE)
+#define bfd_get_file_flags(abfd) ((abfd)->flags)
+#define bfd_applicable_file_flags(abfd) ((abfd)->xvec->object_flags)
+#define bfd_applicable_section_flags(abfd) ((abfd)->xvec->section_flags)
+#define bfd_my_archive(abfd) ((abfd)->my_archive)
+#define bfd_has_map(abfd) ((abfd)->has_armap)
+
+#define bfd_valid_reloc_types(abfd) ((abfd)->xvec->valid_reloc_types)
+#define bfd_usrdata(abfd) ((abfd)->usrdata)
+
+#define bfd_get_start_address(abfd) ((abfd)->start_address)
+#define bfd_get_symcount(abfd) ((abfd)->symcount)
+#define bfd_get_outsymbols(abfd) ((abfd)->outsymbols)
+#define bfd_count_sections(abfd) ((abfd)->section_count)
+
+#define bfd_get_symbol_leading_char(abfd) ((abfd)->xvec->symbol_leading_char)
+
+#define bfd_set_cacheable(abfd,bool) (((abfd)->cacheable = (boolean)(bool)), true)
+
+extern boolean bfd_record_phdr
+  PARAMS ((bfd *, unsigned long, boolean, flagword, boolean, bfd_vma,
+	   boolean, boolean, unsigned int, struct sec **));
+
+/* Byte swapping routines.  */
+
+bfd_vma		bfd_getb64	   PARAMS ((const unsigned char *));
+bfd_vma 	bfd_getl64	   PARAMS ((const unsigned char *));
+bfd_signed_vma	bfd_getb_signed_64 PARAMS ((const unsigned char *));
+bfd_signed_vma	bfd_getl_signed_64 PARAMS ((const unsigned char *));
+bfd_vma		bfd_getb32	   PARAMS ((const unsigned char *));
+bfd_vma		bfd_getl32	   PARAMS ((const unsigned char *));
+bfd_signed_vma	bfd_getb_signed_32 PARAMS ((const unsigned char *));
+bfd_signed_vma	bfd_getl_signed_32 PARAMS ((const unsigned char *));
+bfd_vma		bfd_getb16	   PARAMS ((const unsigned char *));
+bfd_vma		bfd_getl16	   PARAMS ((const unsigned char *));
+bfd_signed_vma	bfd_getb_signed_16 PARAMS ((const unsigned char *));
+bfd_signed_vma	bfd_getl_signed_16 PARAMS ((const unsigned char *));
+void		bfd_putb64	   PARAMS ((bfd_vma, unsigned char *));
+void		bfd_putl64	   PARAMS ((bfd_vma, unsigned char *));
+void		bfd_putb32	   PARAMS ((bfd_vma, unsigned char *));
+void		bfd_putl32	   PARAMS ((bfd_vma, unsigned char *));
+void		bfd_putb16	   PARAMS ((bfd_vma, unsigned char *));
+void		bfd_putl16	   PARAMS ((bfd_vma, unsigned char *));
+
+/* Externally visible ECOFF routines.  */
+
+#if defined(__STDC__) || defined(ALMOST_STDC)
+struct ecoff_debug_info;
+struct ecoff_debug_swap;
+struct ecoff_extr;
+struct symbol_cache_entry;
+struct bfd_link_info;
+struct bfd_link_hash_entry;
+#endif
+extern bfd_vma bfd_ecoff_get_gp_value PARAMS ((bfd * abfd));
+extern boolean bfd_ecoff_set_gp_value PARAMS ((bfd *abfd, bfd_vma gp_value));
+extern boolean bfd_ecoff_set_regmasks
+  PARAMS ((bfd *abfd, unsigned long gprmask, unsigned long fprmask,
+	   unsigned long *cprmask));
+extern PTR bfd_ecoff_debug_init
+  PARAMS ((bfd *output_bfd, struct ecoff_debug_info *output_debug,
+	   const struct ecoff_debug_swap *output_swap,
+	   struct bfd_link_info *));
+extern void bfd_ecoff_debug_free
+  PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
+	   const struct ecoff_debug_swap *output_swap,
+	   struct bfd_link_info *));
+extern boolean bfd_ecoff_debug_accumulate
+  PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
+	   const struct ecoff_debug_swap *output_swap,
+	   bfd *input_bfd, struct ecoff_debug_info *input_debug,
+	   const struct ecoff_debug_swap *input_swap,
+	   struct bfd_link_info *));
+extern boolean bfd_ecoff_debug_accumulate_other
+  PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
+	   const struct ecoff_debug_swap *output_swap, bfd *input_bfd,
+	   struct bfd_link_info *));
+extern boolean bfd_ecoff_debug_externals
+  PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
+	   const struct ecoff_debug_swap *swap,
+	   boolean relocateable,
+	   boolean (*get_extr) (struct symbol_cache_entry *,
+				struct ecoff_extr *),
+	   void (*set_index) (struct symbol_cache_entry *,
+			      bfd_size_type)));
+extern boolean bfd_ecoff_debug_one_external
+  PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
+	   const struct ecoff_debug_swap *swap,
+	   const char *name, struct ecoff_extr *esym));
+extern bfd_size_type bfd_ecoff_debug_size
+  PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
+	   const struct ecoff_debug_swap *swap));
+extern boolean bfd_ecoff_write_debug
+  PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
+	   const struct ecoff_debug_swap *swap, file_ptr where));
+extern boolean bfd_ecoff_write_accumulated_debug
+  PARAMS ((PTR handle, bfd *abfd, struct ecoff_debug_info *debug,
+	   const struct ecoff_debug_swap *swap,
+	   struct bfd_link_info *info, file_ptr where));
+extern boolean bfd_mips_ecoff_create_embedded_relocs
+  PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
+	   char **));
+
+/* Externally visible ELF routines.  */
+
+struct bfd_link_needed_list
+{
+  struct bfd_link_needed_list *next;
+  bfd *by;
+  const char *name;
+};
+
+extern boolean bfd_elf32_record_link_assignment
+  PARAMS ((bfd *, struct bfd_link_info *, const char *, boolean));
+extern boolean bfd_elf64_record_link_assignment
+  PARAMS ((bfd *, struct bfd_link_info *, const char *, boolean));
+extern struct bfd_link_needed_list *bfd_elf_get_needed_list
+  PARAMS ((bfd *, struct bfd_link_info *));
+extern boolean bfd_elf32_size_dynamic_sections
+  PARAMS ((bfd *, const char *, const char *, boolean,
+	   struct bfd_link_info *, struct sec **));
+extern boolean bfd_elf64_size_dynamic_sections
+  PARAMS ((bfd *, const char *, const char *, boolean,
+	   struct bfd_link_info *, struct sec **));
+extern void bfd_elf_set_dt_needed_name PARAMS ((bfd *, const char *));
+extern const char *bfd_elf_get_dt_soname PARAMS ((bfd *));
+
+/* SunOS shared library support routines for the linker.  */
+
+extern struct bfd_link_needed_list *bfd_sunos_get_needed_list
+  PARAMS ((bfd *, struct bfd_link_info *));
+extern boolean bfd_sunos_record_link_assignment
+  PARAMS ((bfd *, struct bfd_link_info *, const char *));
+extern boolean bfd_sunos_size_dynamic_sections
+  PARAMS ((bfd *, struct bfd_link_info *, struct sec **, struct sec **,
+	   struct sec **));
+
+/* Linux shared library support routines for the linker.  */
+
+extern boolean bfd_i386linux_size_dynamic_sections
+  PARAMS ((bfd *, struct bfd_link_info *));
+extern boolean bfd_m68klinux_size_dynamic_sections
+  PARAMS ((bfd *, struct bfd_link_info *));
+
+/* mmap hacks */
+
+struct _bfd_window_internal;
+typedef struct _bfd_window_internal bfd_window_internal;
+
+typedef struct _bfd_window {
+  /* What the user asked for.  */
+  PTR data;
+  bfd_size_type size;
+  /* The actual window used by BFD.  Small user-requested read-only
+     regions sharing a page may share a single window into the object
+     file.  Read-write versions shouldn't until I've fixed things to
+     keep track of which portions have been claimed by the
+     application; don't want to give the same region back when the
+     application wants two writable copies!  */
+  struct _bfd_window_internal *i;
+} bfd_window;
+
+extern void bfd_init_window PARAMS ((bfd_window *));
+extern void bfd_free_window PARAMS ((bfd_window *));
+extern boolean bfd_get_file_window
+  PARAMS ((bfd *, file_ptr, bfd_size_type, bfd_window *, boolean));
+
+/* XCOFF support routines for the linker.  */
+
+extern boolean bfd_xcoff_link_record_set
+  PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
+	   bfd_size_type));
+extern boolean bfd_xcoff_import_symbol
+  PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
+	   bfd_vma, const char *, const char *, const char *));
+extern boolean bfd_xcoff_export_symbol
+  PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
+	   boolean));
+extern boolean bfd_xcoff_link_count_reloc
+  PARAMS ((bfd *, struct bfd_link_info *, const char *));
+extern boolean bfd_xcoff_record_link_assignment
+  PARAMS ((bfd *, struct bfd_link_info *, const char *));
+extern boolean bfd_xcoff_size_dynamic_sections
+  PARAMS ((bfd *, struct bfd_link_info *, const char *, const char *,
+	   unsigned long, unsigned long, unsigned long, boolean,
+	   int, boolean, boolean, struct sec **));
+
+/* And more from the source.  */
@@ -0,0 +1,348 @@
+/* BFD back-end for binary objects.
+   Copyright 1994 Free Software Foundation, Inc.
+   Written by Ian Lance Taylor, Cygnus Support, <ian@cygnus.com>
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is a BFD backend which may be used to write binary objects.
+   It may only be used for output, not input.  The intention is that
+   this may be used as an output format for objcopy in order to
+   generate raw binary data.
+
+   This is very simple.  The only complication is that the real data
+   will start at some address X, and in some cases we will not want to
+   include X zeroes just to get to that point.  Since the start
+   address is not meaningful for this object file format, we use it
+   instead to indicate the number of zeroes to skip at the start of
+   the file.  objcopy cooperates by specially setting the start
+   address to zero by default.  */
+
+#include <ctype.h>
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+
+/* Any bfd we create by reading a binary file has three symbols:
+   a start symbol, an end symbol, and an absolute length symbol.  */
+#define BIN_SYMS 3
+
+static boolean binary_mkobject PARAMS ((bfd *));
+static const bfd_target *binary_object_p PARAMS ((bfd *));
+static boolean binary_get_section_contents
+  PARAMS ((bfd *, asection *, PTR, file_ptr, bfd_size_type));
+static long binary_get_symtab_upper_bound PARAMS ((bfd *));
+static char *mangle_name PARAMS ((bfd *, char *));
+static long binary_get_symtab PARAMS ((bfd *, asymbol **));
+static asymbol *binary_make_empty_symbol PARAMS ((bfd *));
+static void binary_get_symbol_info PARAMS ((bfd *, asymbol *, symbol_info *));
+static boolean binary_set_section_contents
+  PARAMS ((bfd *, asection *, PTR, file_ptr, bfd_size_type));
+static int binary_sizeof_headers PARAMS ((bfd *, boolean));
+
+/* Create a binary object.  Invoked via bfd_set_format.  */
+
+static boolean
+binary_mkobject (abfd)
+     bfd *abfd;
+{
+  return true;
+}
+
+/* Any file may be considered to be a binary file, provided the target
+   was not defaulted.  That is, it must be explicitly specified as
+   being binary.  */
+
+static const bfd_target *
+binary_object_p (abfd)
+     bfd *abfd;
+{
+  struct stat statbuf;
+  asection *sec;
+
+  if (abfd->target_defaulted)
+    {
+      bfd_set_error (bfd_error_wrong_format);
+      return NULL;
+    }
+
+  abfd->symcount = BIN_SYMS;
+
+  /* Find the file size.  */
+  if (bfd_stat (abfd, &statbuf) < 0)
+    {
+      bfd_set_error (bfd_error_system_call);
+      return NULL;
+    }
+
+  /* One data section.  */
+  sec = bfd_make_section (abfd, ".data");
+  if (sec == NULL)
+    return NULL;
+  sec->flags = SEC_ALLOC | SEC_LOAD | SEC_DATA | SEC_HAS_CONTENTS;
+  sec->vma = 0;
+  sec->_raw_size = statbuf.st_size;
+  sec->filepos = 0;
+
+  abfd->tdata.any = (PTR) sec;
+
+  return abfd->xvec;
+}
+
+#define binary_close_and_cleanup _bfd_generic_close_and_cleanup
+#define binary_bfd_free_cached_info _bfd_generic_bfd_free_cached_info
+#define binary_new_section_hook _bfd_generic_new_section_hook
+
+/* Get contents of the only section.  */
+
+static boolean
+binary_get_section_contents (abfd, section, location, offset, count)
+     bfd *abfd;
+     asection *section;
+     PTR location;
+     file_ptr offset;
+     bfd_size_type count;
+{
+  if (bfd_seek (abfd, offset, SEEK_SET) != 0
+      || bfd_read (location, 1, count, abfd) != count)
+    return false;
+  return true;
+}
+
+/* Return the amount of memory needed to read the symbol table.  */
+
+static long
+binary_get_symtab_upper_bound (abfd)
+     bfd *abfd;
+{
+  return (BIN_SYMS + 1) * sizeof (asymbol *);
+}
+
+/* Create a symbol name based on the bfd's filename.  */
+
+static char *
+mangle_name (abfd, suffix)
+     bfd *abfd;
+     char *suffix;
+{
+  int size;
+  char *buf;
+  char *p;
+
+  size = (strlen (bfd_get_filename (abfd))
+	  + strlen (suffix)
+	  + sizeof "_binary__");
+
+  buf = (char *) bfd_alloc (abfd, size);
+  if (buf == NULL)
+    return "";
+
+  sprintf (buf, "_binary_%s_%s", bfd_get_filename (abfd), suffix);
+
+  /* Change any non-alphanumeric characters to underscores.  */
+  for (p = buf; *p; p++)
+    if (! isalnum (*p))
+      *p = '_';
+
+  return buf;
+}
+
+/* Return the symbol table.  */
+
+static long
+binary_get_symtab (abfd, alocation)
+     bfd *abfd;
+     asymbol **alocation;
+{
+  asection *sec = (asection *) abfd->tdata.any;
+  asymbol *syms;
+  unsigned int i;
+
+  syms = (asymbol *) bfd_alloc (abfd, BIN_SYMS * sizeof (asymbol));
+  if (syms == NULL)
+    return false;
+
+  /* Start symbol.  */
+  syms[0].the_bfd = abfd;
+  syms[0].name = mangle_name (abfd, "start");
+  syms[0].value = 0;
+  syms[0].flags = BSF_GLOBAL;
+  syms[0].section = sec;
+  syms[0].udata.p = NULL;
+
+  /* End symbol.  */
+  syms[1].the_bfd = abfd;
+  syms[1].name = mangle_name (abfd, "end");
+  syms[1].value = sec->_raw_size;
+  syms[1].flags = BSF_GLOBAL;
+  syms[1].section = sec;
+  syms[1].udata.p = NULL;
+
+  /* Size symbol.  */
+  syms[2].the_bfd = abfd;
+  syms[2].name = mangle_name (abfd, "size");
+  syms[2].value = sec->_raw_size;
+  syms[2].flags = BSF_GLOBAL;
+  syms[2].section = bfd_abs_section_ptr;
+  syms[2].udata.p = NULL;
+
+  for (i = 0; i < BIN_SYMS; i++)
+    *alocation++ = syms++;
+  *alocation = NULL;
+
+  return BIN_SYMS;
+}
+
+/* Make an empty symbol.  */
+
+static asymbol *
+binary_make_empty_symbol (abfd)
+     bfd *abfd;
+{
+  return (asymbol *) bfd_alloc (abfd, sizeof (asymbol));
+}
+
+#define binary_print_symbol _bfd_nosymbols_print_symbol
+
+/* Get information about a symbol.  */
+
+static void
+binary_get_symbol_info (ignore_abfd, symbol, ret)
+     bfd *ignore_abfd;
+     asymbol *symbol;
+     symbol_info *ret;
+{
+  bfd_symbol_info (symbol, ret);
+}
+
+#define binary_bfd_is_local_label bfd_generic_is_local_label
+#define binary_get_lineno _bfd_nosymbols_get_lineno
+#define binary_find_nearest_line _bfd_nosymbols_find_nearest_line
+#define binary_bfd_make_debug_symbol _bfd_nosymbols_bfd_make_debug_symbol
+#define binary_read_minisymbols _bfd_generic_read_minisymbols
+#define binary_minisymbol_to_symbol _bfd_generic_minisymbol_to_symbol
+
+#define binary_get_reloc_upper_bound \
+  ((long (*) PARAMS ((bfd *, asection *))) bfd_0l)
+#define binary_canonicalize_reloc \
+  ((long (*) PARAMS ((bfd *, asection *, arelent **, asymbol **))) bfd_0l)
+#define binary_bfd_reloc_type_lookup _bfd_norelocs_bfd_reloc_type_lookup
+
+/* Set the architecture of a binary file.  */
+#define binary_set_arch_mach _bfd_generic_set_arch_mach
+
+/* Write section contents of a binary file.  */
+
+static boolean
+binary_set_section_contents (abfd, sec, data, offset, size)
+     bfd *abfd;
+     asection *sec;
+     PTR data;
+     file_ptr offset;
+     bfd_size_type size;
+{
+  if (! abfd->output_has_begun)
+    {
+      bfd_vma low;
+      asection *s;
+
+      /* The lowest section VMA sets the virtual address of the start
+         of the file.  We use the set the file position of all the
+         sections.  */
+      low = abfd->sections->vma;
+      for (s = abfd->sections->next; s != NULL; s = s->next)
+	if (s->vma < low)
+	  low = s->vma;
+
+      for (s = abfd->sections; s != NULL; s = s->next)
+	s->filepos = s->vma - low;
+
+      abfd->output_has_begun = true;
+    }
+
+  return _bfd_generic_set_section_contents (abfd, sec, data, offset, size);
+}
+
+/* No space is required for header information.  */
+
+static int
+binary_sizeof_headers (abfd, exec)
+     bfd *abfd;
+     boolean exec;
+{
+  return 0;
+}
+
+#define binary_bfd_get_relocated_section_contents \
+  bfd_generic_get_relocated_section_contents
+#define binary_bfd_relax_section bfd_generic_relax_section
+#define binary_bfd_link_hash_table_create _bfd_generic_link_hash_table_create
+#define binary_bfd_link_add_symbols _bfd_generic_link_add_symbols
+#define binary_bfd_final_link _bfd_generic_final_link
+#define binary_bfd_link_split_section _bfd_generic_link_split_section
+#define binary_get_section_contents_in_window \
+  _bfd_generic_get_section_contents_in_window
+
+const bfd_target binary_vec =
+{
+  "binary",			/* name */
+  bfd_target_unknown_flavour,	/* flavour */
+  BFD_ENDIAN_UNKNOWN,		/* byteorder */
+  BFD_ENDIAN_UNKNOWN,		/* header_byteorder */
+  EXEC_P,			/* object_flags */
+  (SEC_ALLOC | SEC_LOAD | SEC_READONLY | SEC_CODE | SEC_DATA
+   | SEC_ROM | SEC_HAS_CONTENTS), /* section_flags */
+  0,				/* symbol_leading_char */
+  ' ',				/* ar_pad_char */
+  16,				/* ar_max_namelen */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+  bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+  bfd_getb16, bfd_getb_signed_16, bfd_putb16,	/* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+  bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+  bfd_getb16, bfd_getb_signed_16, bfd_putb16,	/* hdrs */
+  {				/* bfd_check_format */
+    _bfd_dummy_target,
+    binary_object_p,		/* bfd_check_format */
+    _bfd_dummy_target,
+    _bfd_dummy_target,
+  },
+  {				/* bfd_set_format */
+    bfd_false,
+    binary_mkobject,
+    bfd_false,
+    bfd_false,
+  },
+  {				/* bfd_write_contents */
+    bfd_false,
+    bfd_true,
+    bfd_false,
+    bfd_false,
+  },
+
+  BFD_JUMP_TABLE_GENERIC (binary),
+  BFD_JUMP_TABLE_COPY (_bfd_generic),
+  BFD_JUMP_TABLE_CORE (_bfd_nocore),
+  BFD_JUMP_TABLE_ARCHIVE (_bfd_noarchive),
+  BFD_JUMP_TABLE_SYMBOLS (binary),
+  BFD_JUMP_TABLE_RELOCS (binary),
+  BFD_JUMP_TABLE_WRITE (binary),
+  BFD_JUMP_TABLE_LINK (binary),
+  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  NULL
+};
@@ -1,5 +1,5 @@
 /* BFD library -- caching of file descriptors.
-   Copyright 1990, 1991, 1992, 1994 Free Software Foundation, Inc.
+   Copyright 1990, 91, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
   Hacked by Steve Chamberlain of Cygnus Support (steve@cygnus.com).

 This file is part of BFD, the Binary File Descriptor library.
@@ -16,7 +16,7 @@ GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

 /*
 SECTION
@@ -31,7 +31,7 @@ SECTION
 	<<bfd_cache_lookup>>, which runs around and makes sure that
 	the required BFD is open. If not, then it chooses a file to
 	close, closes it and opens the one wanted, returning its file
-	handle.
+	handle. 

 */

@@ -78,19 +78,19 @@ bfd *bfd_last_cache;
 /*
  INTERNAL_FUNCTION
  	bfd_cache_lookup
-
+ 
  DESCRIPTION
 	Check to see if the required BFD is the same as the last one
 	looked up. If so, then it can use the stream in the BFD with
 	impunity, since it can't have changed since the last lookup;
 	otherwise, it has to perform the complicated lookup function.
-
+ 
  .#define bfd_cache_lookup(x) \
  .    ((x)==bfd_last_cache? \
  .      (FILE*)(bfd_last_cache->iostream): \
  .       bfd_cache_lookup_worker(x))
-
-
+ 
+ 
 */

 /* Insert a BFD into the cache.  */
@@ -235,7 +235,8 @@ boolean
 bfd_cache_close (abfd)
     bfd *abfd;
 {
-  if (abfd->iostream == NULL)
+  if (abfd->iostream == NULL
+      || (abfd->flags & BFD_IN_MEMORY) != 0)
    return true;

  return bfd_cache_delete (abfd);
@@ -272,20 +273,20 @@ bfd_open_file (abfd)
    {
    case read_direction:
    case no_direction:
-      abfd->iostream = (char *) fopen (abfd->filename, FOPEN_RB);
+      abfd->iostream = (PTR) fopen (abfd->filename, FOPEN_RB);
      break;
    case both_direction:
    case write_direction:
      if (abfd->opened_once == true)
 	{
-	  abfd->iostream = (char *) fopen (abfd->filename, FOPEN_RUB);
+	  abfd->iostream = (PTR) fopen (abfd->filename, FOPEN_RUB);
 	  if (abfd->iostream == NULL)
-	    abfd->iostream = (char *) fopen (abfd->filename, FOPEN_WUB);
+	    abfd->iostream = (PTR) fopen (abfd->filename, FOPEN_WUB);
 	}
      else
 	{
 	  /*open for creat */
-	  abfd->iostream = (char *) fopen (abfd->filename, FOPEN_WB);
+	  abfd->iostream = (PTR) fopen (abfd->filename, FOPEN_WB);
 	  abfd->opened_once = true;
 	}
      break;
@@ -312,14 +313,17 @@ DESCRIPTION
 	quick answer.  Find a file descriptor for @var{abfd}.  If
 	necessary, it open it.  If there are already more than
 	<<BFD_CACHE_MAX_OPEN>> files open, it tries to close one first, to
-	avoid running out of file descriptors.
+	avoid running out of file descriptors.  
 */

 FILE *
 bfd_cache_lookup_worker (abfd)
     bfd *abfd;
 {
-  if (abfd->my_archive)
+  if ((abfd->flags & BFD_IN_MEMORY) != 0)
+    abort ();
+
+  if (abfd->my_archive) 
    abfd = abfd->my_archive;

  if (abfd->iostream != NULL)
@@ -0,0 +1,31 @@
+/* BFD back-end for Intel 386 COFF LynxOS files.
+   Copyright 1993, 1994 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+
+#define TARGET_SYM	i386lynx_coff_vec
+#define TARGET_NAME	"coff-i386-lynx"
+
+#define LYNXOS
+
+#define COFF_LONG_FILENAMES
+
+#include "coff-i386.c"
@@ -0,0 +1,223 @@
+/* BFD back-end for Motorola M68K COFF LynxOS files.
+   Copyright 1993, 1994, 1995 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_SYM	m68klynx_coff_vec
+#define TARGET_NAME	"coff-m68k-lynx"
+
+#define LYNXOS
+
+#define COFF_LONG_FILENAMES
+
+#define _bfd_m68kcoff_howto_table _bfd_m68klynx_howto_table	
+#define _bfd_m68kcoff_rtype2howto _bfd_m68klynx_rtype2howto	
+#define _bfd_m68kcoff_howto2rtype _bfd_m68klynx_howto2rtype	
+#define _bfd_m68kcoff_reloc_type_lookup _bfd_m68klynx_reloc_type_lookup
+
+#define LYNX_SPECIAL_FN _bfd_m68klynx_special_fn
+
+#include "bfd.h"
+#include "sysdep.h"
+
+#ifdef ANSI_PROTOTYPES
+struct internal_reloc;
+struct coff_link_hash_entry;
+struct internal_syment;
+#endif
+
+static bfd_reloc_status_type _bfd_m68klynx_special_fn
+  PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+static reloc_howto_type *coff_m68k_lynx_rtype_to_howto
+  PARAMS ((bfd *, asection *, struct internal_reloc *,
+	   struct coff_link_hash_entry *, struct internal_syment *,
+	   bfd_vma *));
+
+/* For some reason when using m68k COFF the value stored in the .text
+   section for a reference to a common symbol is the value itself plus
+   any desired offset.  (taken from work done by Ian Taylor, Cygnus Support,
+   for I386 COFF).  */
+
+/* If we are producing relocateable output, we need to do some
+   adjustments to the object file that are not done by the
+   bfd_perform_relocation function.  This function is called by every
+   reloc type to make any required adjustments.  */
+
+static bfd_reloc_status_type
+_bfd_m68klynx_special_fn (abfd, reloc_entry, symbol, data, input_section,
+			  output_bfd, error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  symvalue diff;
+
+  if (output_bfd == (bfd *) NULL)
+    return bfd_reloc_continue;
+
+  if (bfd_is_com_section (symbol->section))
+    {
+      /* We are relocating a common symbol.  The current value in the
+	 object file is ORIG + OFFSET, where ORIG is the value of the
+	 common symbol as seen by the object file when it was compiled
+	 (this may be zero if the symbol was undefined) and OFFSET is
+	 the offset into the common symbol (normally zero, but may be
+	 non-zero when referring to a field in a common structure).
+	 ORIG is the negative of reloc_entry->addend, which is set by
+	 the CALC_ADDEND macro below.  We want to replace the value in
+	 the object file with NEW + OFFSET, where NEW is the value of
+	 the common symbol which we are going to put in the final
+	 object file.  NEW is symbol->value.  */
+      diff = symbol->value + reloc_entry->addend;
+    }
+  else
+    {
+      /* For some reason bfd_perform_relocation always effectively
+	 ignores the addend for a COFF target when producing
+	 relocateable output.  This seems to be always wrong for 386
+	 COFF, so we handle the addend here instead.  */
+      diff = reloc_entry->addend;
+    }
+
+#define DOIT(x) \
+  x = ((x & ~howto->dst_mask) | (((x & howto->src_mask) + diff) & howto->dst_mask))
+
+  if (diff != 0)
+    {
+      reloc_howto_type *howto = reloc_entry->howto;
+      unsigned char *addr = (unsigned char *) data + reloc_entry->address;
+
+      switch (howto->size)
+	{
+	case 0:
+	  {
+	    char x = bfd_get_8 (abfd, addr);
+	    DOIT (x);
+	    bfd_put_8 (abfd, x, addr);
+	  }
+	  break;
+
+	case 1:
+	  {
+	    short x = bfd_get_16 (abfd, addr);
+	    DOIT (x);
+	    bfd_put_16 (abfd, x, addr);
+	  }
+	  break;
+
+	case 2:
+	  {
+	    long x = bfd_get_32 (abfd, addr);
+	    DOIT (x);
+	    bfd_put_32 (abfd, x, addr);
+	  }
+	  break;
+
+	default:
+	  abort ();
+	}
+    }
+
+  /* Now let bfd_perform_relocation finish everything up.  */
+  return bfd_reloc_continue;
+}
+/* Compute the addend of a reloc.  If the reloc is to a common symbol,
+   the object file contains the value of the common symbol.  By the
+   time this is called, the linker may be using a different symbol
+   from a different object file with a different value.  Therefore, we
+   hack wildly to locate the original symbol from this file so that we
+   can make the correct adjustment.  This macro sets coffsym to the
+   symbol from the original file, and uses it to set the addend value
+   correctly.  If this is not a common symbol, the usual addend
+   calculation is done, except that an additional tweak is needed for
+   PC relative relocs.
+   FIXME: This macro refers to symbols and asect; these are from the
+   calling function, not the macro arguments.  */
+
+#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr)		\
+  {								\
+    coff_symbol_type *coffsym = (coff_symbol_type *) NULL;	\
+    if (ptr && bfd_asymbol_bfd (ptr) != abfd)			\
+      coffsym = (obj_symbols (abfd)				\
+	         + (cache_ptr->sym_ptr_ptr - symbols));		\
+    else if (ptr)						\
+      coffsym = coff_symbol_from (abfd, ptr);			\
+    if (coffsym != (coff_symbol_type *) NULL			\
+	&& coffsym->native->u.syment.n_scnum == 0)		\
+      cache_ptr->addend = - coffsym->native->u.syment.n_value;	\
+    else if (ptr && bfd_asymbol_bfd (ptr) == abfd		\
+	     && ptr->section != (asection *) NULL)		\
+      cache_ptr->addend = - (ptr->section->vma + ptr->value);	\
+    else							\
+      cache_ptr->addend = 0;					\
+    if (ptr && (reloc.r_type == R_PCRBYTE			\
+		|| reloc.r_type == R_PCRWORD			\
+		|| reloc.r_type == R_PCRLONG))			\
+      cache_ptr->addend += asect->vma;				\
+  }
+
+#define coff_rtype_to_howto coff_m68k_lynx_rtype_to_howto
+
+#include "coff-m68k.c"
+
+/* coff-m68k.c uses the special COFF backend linker.  We need to
+   adjust common symbols.
+
+   We can't define this function until after we have included
+   coff-m68k.c, because it uses RTYPE2HOWTO.  */
+
+/*ARGSUSED*/
+static reloc_howto_type *
+coff_m68k_lynx_rtype_to_howto (abfd, sec, rel, h, sym, addendp)
+     bfd *abfd;
+     asection *sec;
+     struct internal_reloc *rel;
+     struct coff_link_hash_entry *h;
+     struct internal_syment *sym;
+     bfd_vma *addendp;
+{
+  arelent relent;
+  reloc_howto_type *howto;
+
+  RTYPE2HOWTO (&relent, rel);
+
+  howto = relent.howto;
+
+  if (sym != NULL && sym->n_scnum == 0 && sym->n_value != 0)
+    {
+      /* This is a common symbol.  The section contents include the
+	 size (sym->n_value) as an addend.  The relocate_section
+	 function will be adding in the final value of the symbol.  We
+	 need to subtract out the current size in order to get the
+	 correct result.  */
+      BFD_ASSERT (h != NULL);
+      *addendp -= sym->n_value;
+    }
+
+  /* If the output symbol is common (in which case this must be a
+     relocateable link), we need to add in the final size of the
+     common symbol.  */
+  if (h != NULL && h->root.type == bfd_link_hash_common)
+    *addendp += h->root.u.c.size;
+
+  return howto;
+}
@@ -0,0 +1,28 @@
+/* BFD back-end for Sparc COFF LynxOS files.
+   Copyright 1993 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_SYM	sparclynx_coff_vec
+#define TARGET_NAME	"coff-sparc-lynx"
+
+#define LYNXOS
+
+#define COFF_LONG_FILENAMES
+
+#include "coff-sparc.c"
@@ -0,0 +1,313 @@
+/* BFD back-end for CISCO crash dumps.
+
+Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+/* core_file_failing_signal returns a host signal (this probably should
+   be fixed).  */
+#include <signal.h>
+
+#define CRASH_INFO (0xffc)
+#define CRASH_MAGIC 0xdead1234
+
+typedef enum {
+    CRASH_REASON_NOTCRASHED = 0,
+    CRASH_REASON_EXCEPTION = 1,
+    CRASH_REASON_CORRUPT = 2,
+  } crashreason;
+
+struct crashinfo_external
+{
+  char magic[4];			/* Magic number */
+  char version[4];		/* Version number */
+  char reason[4];		/* Crash reason */
+  char cpu_vector[4];		/* CPU vector for exceptions */
+  char registers[4];		/* Pointer to saved registers */
+  char rambase[4];		/* Base of RAM (not in V1 crash info) */
+};
+
+struct cisco_core_struct
+{
+  int sig;
+};
+
+static const bfd_target *
+cisco_core_file_p (abfd)
+     bfd *abfd;
+{
+  char buf[4];
+  unsigned int crashinfo_offset;
+  struct crashinfo_external crashinfo;
+  int nread;
+  unsigned int rambase;
+  sec_ptr asect;
+  struct stat statbuf;
+
+  if (bfd_seek (abfd, CRASH_INFO, SEEK_SET) != 0)
+    return NULL;
+
+  nread = bfd_read (buf, 1, 4, abfd);
+  if (nread != 4)
+    {
+      if (bfd_get_error () != bfd_error_system_call)
+	bfd_set_error (bfd_error_wrong_format);
+      return NULL;
+    }
+  crashinfo_offset = bfd_get_32 (abfd, buf);
+
+  if (bfd_seek (abfd, crashinfo_offset, SEEK_SET) != 0)
+    return NULL;
+
+  nread = bfd_read (&crashinfo, 1, sizeof (crashinfo), abfd);
+  if (nread != sizeof (crashinfo))
+    {
+      if (bfd_get_error () != bfd_error_system_call)
+	bfd_set_error (bfd_error_wrong_format);
+      return NULL;
+    }
+
+  if (bfd_stat (abfd, &statbuf) < 0)
+    {
+      bfd_set_error (bfd_error_system_call);
+      return NULL;
+    }
+
+  if (bfd_get_32 (abfd, crashinfo.magic) != CRASH_MAGIC)
+    {
+      bfd_set_error (bfd_error_wrong_format);
+      return NULL;
+    }
+
+  switch (bfd_get_32 (abfd, crashinfo.version))
+    {
+    case 0:
+      bfd_set_error (bfd_error_wrong_format);
+      return NULL;
+    case 1:
+      rambase = 0;
+      break;
+    default:
+    case 2:
+      rambase = bfd_get_32 (abfd, crashinfo.rambase);
+      break;
+    }
+
+  /* OK, we believe you.  You're a core file.  */
+
+  abfd->tdata.cisco_core_data =
+    ((struct cisco_core_struct *)
+     bfd_zmalloc (sizeof (struct cisco_core_struct)));
+  if (abfd->tdata.cisco_core_data == NULL)
+    return NULL;
+
+  switch ((crashreason) bfd_get_32 (abfd, crashinfo.reason))
+    {
+    case CRASH_REASON_NOTCRASHED:
+      /* Crash file probably came from write core.  */
+      abfd->tdata.cisco_core_data->sig = 0;
+      break;
+    case CRASH_REASON_CORRUPT:
+      /* The crash context area was corrupt -- proceed with caution.
+	 We have no way of passing this information back to the caller.  */
+      abfd->tdata.cisco_core_data->sig = 0;
+      break;
+    case CRASH_REASON_EXCEPTION:
+      /* Crash occured due to CPU exception.  */
+
+      /* This is 68k-specific; for MIPS we'll need to interpret
+	 cpu_vector differently based on the target configuration
+	 (since CISCO core files don't seem to have the processor
+	 encoded in them).  */
+
+      switch (bfd_get_32 (abfd, crashinfo.cpu_vector))
+	{
+	   /* bus error           */
+	case 2 : abfd->tdata.cisco_core_data->sig = SIGBUS; break;
+	   /* address error       */
+	case 3 : abfd->tdata.cisco_core_data->sig = SIGBUS; break;
+	   /* illegal instruction */
+	case 4 : abfd->tdata.cisco_core_data->sig = SIGILL;  break;
+	   /* zero divide         */
+	case 5 : abfd->tdata.cisco_core_data->sig = SIGFPE;  break;
+	   /* chk instruction     */
+	case 6 : abfd->tdata.cisco_core_data->sig = SIGFPE; break;
+	   /* trapv instruction   */
+	case 7 : abfd->tdata.cisco_core_data->sig = SIGFPE; break;
+	   /* privilege violation */
+	case 8 : abfd->tdata.cisco_core_data->sig = SIGSEGV; break;
+	   /* trace trap          */
+	case 9 : abfd->tdata.cisco_core_data->sig = SIGTRAP;  break;
+	   /* line 1010 emulator  */
+	case 10: abfd->tdata.cisco_core_data->sig = SIGILL;  break;
+	   /* line 1111 emulator  */
+	case 11: abfd->tdata.cisco_core_data->sig = SIGILL;  break;
+
+	  /* Coprocessor protocol violation.  Using a standard MMU or FPU
+	     this cannot be triggered by software.  Call it a SIGBUS.  */
+	case 13: abfd->tdata.cisco_core_data->sig = SIGBUS;  break;
+
+	  /* interrupt           */
+	case 31: abfd->tdata.cisco_core_data->sig = SIGINT;  break;
+	  /* breakpoint          */
+	case 33: abfd->tdata.cisco_core_data->sig = SIGTRAP;  break;
+
+	  /* floating point err  */
+	case 48: abfd->tdata.cisco_core_data->sig = SIGFPE;  break;
+	  /* floating point err  */
+	case 49: abfd->tdata.cisco_core_data->sig = SIGFPE;  break;
+	  /* zero divide         */
+	case 50: abfd->tdata.cisco_core_data->sig = SIGFPE;  break;
+	  /* underflow           */
+	case 51: abfd->tdata.cisco_core_data->sig = SIGFPE;  break;
+	  /* operand error       */
+	case 52: abfd->tdata.cisco_core_data->sig = SIGFPE;  break;
+	   /* overflow            */
+	case 53: abfd->tdata.cisco_core_data->sig = SIGFPE;  break;
+	  /* NAN                 */
+	case 54: abfd->tdata.cisco_core_data->sig = SIGFPE;  break;
+	default:
+	  /* "software generated"*/
+	  abfd->tdata.cisco_core_data->sig = SIGEMT;
+	}
+      break;
+    default:
+      /* Unknown crash reason.  */
+      abfd->tdata.cisco_core_data->sig = 0;
+      break;
+    }
+
+  abfd->sections = NULL;
+  abfd->section_count = 0;
+
+  asect = (asection *) bfd_zmalloc (sizeof (asection));
+  if (asect == NULL)
+    goto error_return;
+  asect->name = ".reg";
+  asect->flags = SEC_HAS_CONTENTS;
+  /* This can be bigger than the real size.  Set it to the size of the whole
+     core file.  */
+  asect->_raw_size = statbuf.st_size;
+  asect->vma = 0;
+  asect->filepos = bfd_get_32 (abfd, crashinfo.registers) - rambase;
+  asect->next = abfd->sections;
+  abfd->sections = asect;
+  ++abfd->section_count;
+
+  /* There is only one section containing data from the target system's RAM.
+     We call it .data.  */
+  asect = (asection *) bfd_zmalloc (sizeof (asection));
+  if (asect == NULL)
+    goto error_return;
+  asect->name = ".data";
+  asect->flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS;
+  /* The size of memory is the size of the core file itself.  */
+  asect->_raw_size = statbuf.st_size;
+  asect->vma = rambase;
+  asect->filepos = 0;
+  asect->next = abfd->sections;
+  abfd->sections = asect;
+  ++abfd->section_count;
+
+  return abfd->xvec;
+
+ error_return:
+  {
+    sec_ptr nextsect;
+    for (asect = abfd->sections; asect != NULL;)
+      {
+	nextsect = asect->next;
+	free (asect);
+	asect = nextsect;
+      }
+    free (abfd->tdata.cisco_core_data);
+    return NULL;
+  }
+}
+
+char *
+cisco_core_file_failing_command (abfd)
+     bfd *abfd;
+{
+  return NULL;
+}
+
+int
+cisco_core_file_failing_signal (abfd)
+     bfd *abfd;
+{
+  return abfd->tdata.cisco_core_data->sig;
+}
+
+boolean
+cisco_core_file_matches_executable_p (core_bfd, exec_bfd)
+     bfd *core_bfd;
+     bfd *exec_bfd;
+{
+  return true;
+}
+
+const bfd_target cisco_core_vec =
+  {
+    "trad-core",
+    bfd_target_unknown_flavour,
+    BFD_ENDIAN_BIG,		/* target byte order */
+    BFD_ENDIAN_BIG,		/* target headers byte order */
+    (HAS_RELOC | EXEC_P |	/* object flags */
+     HAS_LINENO | HAS_DEBUG |
+     HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+    (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+    0,			                                   /* symbol prefix */
+    ' ',						   /* ar_pad_char */
+    16,							   /* ar_max_namelen */
+    bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+    bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+    bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
+    bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+    bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+    bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
+
+    {				/* bfd_check_format */
+     _bfd_dummy_target,		/* unknown format */
+     _bfd_dummy_target,		/* object file */
+     _bfd_dummy_target,		/* archive */
+     cisco_core_file_p	/* a core file */
+    },
+    {				/* bfd_set_format */
+     bfd_false, bfd_false,
+     bfd_false, bfd_false
+    },
+    {				/* bfd_write_contents */
+     bfd_false, bfd_false,
+     bfd_false, bfd_false
+    },
+    
+       BFD_JUMP_TABLE_GENERIC (_bfd_generic),
+       BFD_JUMP_TABLE_COPY (_bfd_generic),
+       BFD_JUMP_TABLE_CORE (cisco),
+       BFD_JUMP_TABLE_ARCHIVE (_bfd_noarchive),
+       BFD_JUMP_TABLE_SYMBOLS (_bfd_nosymbols),
+       BFD_JUMP_TABLE_RELOCS (_bfd_norelocs),
+       BFD_JUMP_TABLE_WRITE (_bfd_generic),
+       BFD_JUMP_TABLE_LINK (_bfd_nolink),
+       BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+    (PTR) 0			/* backend_data */
+};
@@ -0,0 +1,641 @@
+/* BFD back-end for AMD 29000 COFF binaries.
+   Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+   Contributed by David Wood at New York University 7/8/91.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define A29K 1
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+#include "coff/a29k.h"
+#include "coff/internal.h"
+#include "libcoff.h"
+
+static long get_symbol_value PARAMS ((asymbol *));
+static bfd_reloc_status_type a29k_reloc
+  PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+static boolean coff_a29k_relocate_section
+  PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *,
+	   struct internal_reloc *, struct internal_syment *, asection **));
+static boolean coff_a29k_adjust_symndx
+  PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *,
+	   struct internal_reloc *, boolean *));
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (2)
+
+#define INSERT_HWORD(WORD,HWORD)	\
+    (((WORD) & 0xff00ff00) | (((HWORD) & 0xff00) << 8) | ((HWORD)& 0xff))
+#define EXTRACT_HWORD(WORD) \
+    ((((WORD) & 0x00ff0000) >> 8) | ((WORD)& 0xff))
+#define SIGN_EXTEND_HWORD(HWORD) \
+    ((HWORD) & 0x8000 ? (HWORD)|(~0xffffL) : (HWORD))
+
+/* Provided the symbol, returns the value reffed */
+static long
+get_symbol_value (symbol)       
+     asymbol *symbol;
+{                                             
+  long relocation = 0;
+
+  if (bfd_is_com_section (symbol->section))
+  {
+    relocation = 0;                           
+  }
+  else 
+  {                                      
+    relocation = symbol->value +
+     symbol->section->output_section->vma +
+      symbol->section->output_offset;
+  }                                           
+
+  return(relocation);
+}
+
+/* this function is in charge of performing all the 29k relocations */
+
+static bfd_reloc_status_type
+a29k_reloc (abfd, reloc_entry, symbol_in, data, input_section, output_bfd,
+	    error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol_in;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  /* the consth relocation comes in two parts, we have to remember
+     the state between calls, in these variables */
+  static boolean part1_consth_active = false;
+  static unsigned long part1_consth_value;
+
+  unsigned long insn;
+  unsigned long sym_value;
+  unsigned long unsigned_value;
+  unsigned short r_type;
+  long signed_value;
+
+  unsigned long addr = reloc_entry->address ; /*+ input_section->vma*/
+  bfd_byte  *hit_data =addr + (bfd_byte *)(data);
+	
+  r_type = reloc_entry->howto->type;
+
+  if (output_bfd) {
+    /* Partial linking - do nothing */
+    reloc_entry->address += input_section->output_offset;
+    return bfd_reloc_ok;
+
+  }
+
+  if (symbol_in != NULL
+      && bfd_is_und_section (symbol_in->section))
+  {
+    /* Keep the state machine happy in case we're called again */
+    if (r_type == R_IHIHALF) 
+    {
+      part1_consth_active = true;
+      part1_consth_value  = 0;
+    }
+    return(bfd_reloc_undefined);
+  }
+
+  if ((part1_consth_active) && (r_type != R_IHCONST)) 
+  {
+    part1_consth_active = false;
+    *error_message = (char *) "Missing IHCONST";
+    return(bfd_reloc_dangerous);
+  }
+
+
+  sym_value = get_symbol_value(symbol_in);
+
+  switch (r_type) 
+  {
+   case R_IREL: 	
+    insn = bfd_get_32(abfd, hit_data); 
+    /* Take the value in the field and sign extend it */
+    signed_value = EXTRACT_HWORD(insn);
+    signed_value = SIGN_EXTEND_HWORD(signed_value);
+    signed_value <<= 2;
+
+    /* See the note on the R_IREL reloc in coff_a29k_relocate_section.  */
+    if (signed_value == - (long) reloc_entry->address)
+      signed_value = 0;
+
+    signed_value += sym_value + reloc_entry->addend;
+    if ((signed_value & ~0x3ffff) == 0)
+    {				/* Absolute jmp/call */
+      insn |= (1<<24);		/* Make it absolute */
+      /* FIXME: Should we change r_type to R_IABS */
+    } 
+    else 
+    {
+      /* Relative jmp/call, so subtract from the value the
+	 address of the place we're coming from */
+      signed_value -= (reloc_entry->address
+		       + input_section->output_section->vma
+		       + input_section->output_offset);
+      if (signed_value>0x1ffff || signed_value<-0x20000) 
+       return(bfd_reloc_overflow);
+    }
+    signed_value >>= 2;
+    insn = INSERT_HWORD(insn, signed_value);
+    bfd_put_32(abfd, insn ,hit_data); 
+    break;
+   case R_ILOHALF: 
+    insn = bfd_get_32(abfd, hit_data); 
+    unsigned_value = EXTRACT_HWORD(insn);
+    unsigned_value +=  sym_value + reloc_entry->addend;
+    insn = INSERT_HWORD(insn, unsigned_value);
+    bfd_put_32(abfd, insn, hit_data); 
+    break;
+   case R_IHIHALF:
+    insn = bfd_get_32(abfd, hit_data); 
+    /* consth, part 1 
+       Just get the symbol value that is referenced */
+    part1_consth_active = true;
+    part1_consth_value = sym_value + reloc_entry->addend;
+    /* Don't modify insn until R_IHCONST */
+    break;
+   case R_IHCONST:	
+    insn = bfd_get_32(abfd, hit_data); 
+    /* consth, part 2 
+       Now relocate the reference */
+    if (part1_consth_active == false) {
+      *error_message = (char *) "Missing IHIHALF";
+      return(bfd_reloc_dangerous);
+    }
+    /* sym_ptr_ptr = r_symndx, in coff_slurp_reloc_table() */
+    unsigned_value = 0;		/*EXTRACT_HWORD(insn) << 16;*/
+    unsigned_value += reloc_entry->addend; /* r_symndx */
+    unsigned_value += part1_consth_value;
+    unsigned_value = unsigned_value >> 16;
+    insn = INSERT_HWORD(insn, unsigned_value);
+    part1_consth_active = false;
+    bfd_put_32(abfd, insn, hit_data); 
+    break;
+   case R_BYTE:
+    insn = bfd_get_8(abfd, hit_data); 
+    unsigned_value = insn + sym_value + reloc_entry->addend;	
+    if (unsigned_value & 0xffffff00)
+      return(bfd_reloc_overflow);
+    bfd_put_8(abfd, unsigned_value, hit_data); 
+    break;
+   case R_HWORD:
+    insn = bfd_get_16(abfd, hit_data); 
+    unsigned_value = insn + sym_value + reloc_entry->addend;	
+    if (unsigned_value & 0xffff0000)
+      return(bfd_reloc_overflow);
+    bfd_put_16(abfd, insn, hit_data); 
+    break;
+   case R_WORD:
+    insn = bfd_get_32(abfd, hit_data); 
+    insn += sym_value + reloc_entry->addend;  
+    bfd_put_32(abfd, insn, hit_data);
+    break;
+   default:
+    *error_message = "Unrecognized reloc";
+    return (bfd_reloc_dangerous);
+  }
+
+
+  return(bfd_reloc_ok);	
+}
+
+/*      type	   rightshift
+		       size
+			  bitsize
+			       pc-relative
+				     bitpos
+					 absolute
+					     complain_on_overflow
+						  special_function
+						    relocation name
+							       partial_inplace 
+								      src_mask
+*/
+
+/*FIXME: I'm not real sure about this table */
+static reloc_howto_type howto_table[] = 
+{
+  {R_ABS,     0, 3, 32, false, 0, complain_overflow_bitfield,a29k_reloc,"ABS",     true, 0xffffffff,0xffffffff, false},
+  {1},  {2},  {3},   {4},  {5},  {6},  {7},  {8},  {9}, {10},
+  {11}, {12}, {13}, {14}, {15}, {16}, {17}, {18}, {19}, {20},
+  {21}, {22}, {23},
+  {R_IREL,    0, 3, 32, true,  0, complain_overflow_signed,a29k_reloc,"IREL",    true, 0xffffffff,0xffffffff, false},
+  {R_IABS,    0, 3, 32, false, 0, complain_overflow_bitfield, a29k_reloc,"IABS",    true, 0xffffffff,0xffffffff, false},
+  {R_ILOHALF, 0, 3, 16, true,  0, complain_overflow_signed, a29k_reloc,"ILOHALF", true, 0x0000ffff,0x0000ffff, false},
+  {R_IHIHALF, 0, 3, 16, true,  16, complain_overflow_signed, a29k_reloc,"IHIHALF", true, 0xffff0000,0xffff0000, false},
+  {R_IHCONST, 0, 3, 16, true,  0, complain_overflow_signed, a29k_reloc,"IHCONST", true, 0xffff0000,0xffff0000, false},
+  {R_BYTE,    0, 0, 8, false, 0, complain_overflow_bitfield, a29k_reloc,"BYTE",    true, 0x000000ff,0x000000ff, false},
+  {R_HWORD,   0, 1, 16, false, 0, complain_overflow_bitfield, a29k_reloc,"HWORD",   true, 0x0000ffff,0x0000ffff, false},
+  {R_WORD,    0, 2, 32, false, 0, complain_overflow_bitfield, a29k_reloc,"WORD",    true, 0xffffffff,0xffffffff, false},
+};
+
+#define BADMAG(x) A29KBADMAG(x)
+
+#define RELOC_PROCESSING(relent, reloc, symbols, abfd, section) \
+ reloc_processing(relent, reloc, symbols, abfd, section)
+
+static void
+reloc_processing (relent,reloc, symbols, abfd, section)
+     arelent *relent;
+     struct internal_reloc *reloc;
+     asymbol **symbols;
+     bfd *abfd;
+     asection *section;
+{
+    static bfd_vma ihihalf_vaddr = (bfd_vma) -1;
+
+    relent->address = reloc->r_vaddr;		
+    relent->howto = howto_table + reloc->r_type;
+    if (reloc->r_type == R_IHCONST) 
+    {		
+      /* The address of an R_IHCONST should always be the address of
+	 the immediately preceding R_IHIHALF.  relocs generated by gas
+	 are correct, but relocs generated by High C are different (I
+	 can't figure out what the address means for High C).  We can
+	 handle both gas and High C by ignoring the address here, and
+	 simply reusing the address saved for R_IHIHALF.  */
+        if (ihihalf_vaddr == (bfd_vma) -1)
+	  abort ();
+	relent->address = ihihalf_vaddr;
+	ihihalf_vaddr = (bfd_vma) -1;
+	relent->addend = reloc->r_symndx;		
+	relent->sym_ptr_ptr= bfd_abs_section_ptr->symbol_ptr_ptr;
+    }
+    else 
+    {
+      asymbol *ptr;
+      relent->sym_ptr_ptr = symbols + obj_convert(abfd)[reloc->r_symndx];
+
+      ptr = *(relent->sym_ptr_ptr);
+
+      if (ptr 
+	  && bfd_asymbol_bfd(ptr) == abfd		
+
+	  && ((ptr->flags & BSF_OLD_COMMON)== 0))	
+      {						
+	  relent->addend = 0;
+      }						
+      else
+      {					
+	  relent->addend = 0;			
+      }			
+      relent->address-= section->vma;
+      if (reloc->r_type == R_IHIHALF)
+	ihihalf_vaddr = relent->address;
+      else if (ihihalf_vaddr != (bfd_vma) -1)
+	abort ();
+  }
+}
+
+/* The reloc processing routine for the optimized COFF linker.  */
+
+static boolean
+coff_a29k_relocate_section (output_bfd, info, input_bfd, input_section,
+			    contents, relocs, syms, sections)
+     bfd *output_bfd;
+     struct bfd_link_info *info;
+     bfd *input_bfd;
+     asection *input_section;
+     bfd_byte *contents;
+     struct internal_reloc *relocs;
+     struct internal_syment *syms;
+     asection **sections;
+{
+  struct internal_reloc *rel;
+  struct internal_reloc *relend;
+  boolean hihalf;
+  bfd_vma hihalf_val;
+
+  /* If we are performing a relocateable link, we don't need to do a
+     thing.  The caller will take care of adjusting the reloc
+     addresses and symbol indices.  */
+  if (info->relocateable)
+    return true;
+
+  hihalf = false;
+  hihalf_val = 0;
+
+  rel = relocs;
+  relend = rel + input_section->reloc_count;
+  for (; rel < relend; rel++)
+    {
+      long symndx;
+      bfd_byte *loc;
+      struct coff_link_hash_entry *h;
+      struct internal_syment *sym;
+      asection *sec;
+      bfd_vma val;
+      boolean overflow;
+      unsigned long insn;
+      long signed_value;
+      unsigned long unsigned_value;
+      bfd_reloc_status_type rstat;
+
+      symndx = rel->r_symndx;
+      loc = contents + rel->r_vaddr - input_section->vma;
+
+      if (symndx == -1)
+	h = NULL;
+      else
+	h = obj_coff_sym_hashes (input_bfd)[symndx];
+
+      sym = NULL;
+      sec = NULL;
+      val = 0;
+
+      /* An R_IHCONST reloc does not have a symbol.  Instead, the
+         symbol index is an addend.  R_IHCONST is always used in
+         conjunction with R_IHHALF.  */
+      if (rel->r_type != R_IHCONST)
+	{
+	  if (h == NULL)
+	    {
+	      if (symndx == -1)
+		sec = bfd_abs_section_ptr;
+	      else
+		{
+		  sym = syms + symndx;
+		  sec = sections[symndx];
+		  val = (sec->output_section->vma
+			 + sec->output_offset
+			 + sym->n_value
+			 - sec->vma);
+		}
+	    }
+	  else
+	    {
+	      if (h->root.type == bfd_link_hash_defined
+		  || h->root.type == bfd_link_hash_defweak)
+		{
+		  sec = h->root.u.def.section;
+		  val = (h->root.u.def.value
+			 + sec->output_section->vma
+			 + sec->output_offset);
+		}
+	      else
+		{
+		  if (! ((*info->callbacks->undefined_symbol)
+			 (info, h->root.root.string, input_bfd, input_section,
+			  rel->r_vaddr - input_section->vma)))
+		    return false;
+		}
+	    }
+
+	  if (hihalf)
+	    {
+	      if (! ((*info->callbacks->reloc_dangerous)
+		     (info, "missing IHCONST reloc", input_bfd,
+		      input_section, rel->r_vaddr - input_section->vma)))
+		return false;
+	      hihalf = false;
+	    }
+	}
+
+      overflow = false;
+
+      switch (rel->r_type)
+	{
+	default:
+	  bfd_set_error (bfd_error_bad_value);
+	  return false;
+
+	case R_IREL:
+	  insn = bfd_get_32 (input_bfd, loc);
+
+	  /* Extract the addend.  */
+	  signed_value = EXTRACT_HWORD (insn);
+	  signed_value = SIGN_EXTEND_HWORD (signed_value);
+	  signed_value <<= 2;
+
+	  /* Unfortunately, there are two different versions of COFF
+	     a29k.  In the original AMD version, the value stored in
+	     the field for the R_IREL reloc is a simple addend.  In
+	     the GNU version, the value is the negative of the address
+	     of the reloc within section.  We try to cope here by
+	     assuming the AMD version, unless the addend is exactly
+	     the negative of the address; in the latter case we assume
+	     the GNU version.  This means that something like
+	         .text
+		 nop
+		 jmp i-4
+	     will fail, because the addend of -4 will happen to equal
+	     the negative of the address within the section.  The
+	     compiler will never generate code like this.
+
+	     At some point in the future we may want to take out this
+	     check.  */
+
+	  if (signed_value == - (long) (rel->r_vaddr - input_section->vma))
+	    signed_value = 0;
+
+	  /* Determine the destination of the jump.  */
+	  signed_value += val;
+
+	  if ((signed_value & ~0x3ffff) == 0)
+	    {
+	      /* We can use an absolute jump.  */
+	      insn |= (1 << 24);
+	    }
+	  else
+	    {
+	      /* Make the destination PC relative.  */
+	      signed_value -= (input_section->output_section->vma
+			       + input_section->output_offset
+			       + (rel->r_vaddr - input_section->vma));
+	      if (signed_value > 0x1ffff || signed_value < - 0x20000)
+		{
+		  overflow = true;
+		  signed_value = 0;
+		}
+	    }
+
+	  /* Put the adjusted value back into the instruction.  */
+	  signed_value >>= 2;
+	  insn = INSERT_HWORD (insn, signed_value);
+
+	  bfd_put_32 (input_bfd, (bfd_vma) insn, loc);
+
+	  break;
+
+	case R_ILOHALF:
+	  insn = bfd_get_32 (input_bfd, loc);
+	  unsigned_value = EXTRACT_HWORD (insn);
+	  unsigned_value += val;
+	  insn = INSERT_HWORD (insn, unsigned_value);
+	  bfd_put_32 (input_bfd, insn, loc);
+	  break;
+
+	case R_IHIHALF:
+	  /* Save the value for the R_IHCONST reloc.  */
+	  hihalf = true;
+	  hihalf_val = val;
+	  break;
+
+	case R_IHCONST:
+	  if (! hihalf)
+	    {
+	      if (! ((*info->callbacks->reloc_dangerous)
+		     (info, "missing IHIHALF reloc", input_bfd,
+		      input_section, rel->r_vaddr - input_section->vma)))
+		return false;
+	      hihalf_val = 0;
+	    }
+
+	  insn = bfd_get_32 (input_bfd, loc);
+	  unsigned_value = rel->r_symndx + hihalf_val;
+	  unsigned_value >>= 16;
+	  insn = INSERT_HWORD (insn, unsigned_value);
+	  bfd_put_32 (input_bfd, (bfd_vma) insn, loc);
+
+	  hihalf = false;
+
+	  break;
+
+	case R_BYTE:
+	case R_HWORD:
+	case R_WORD:
+	  rstat = _bfd_relocate_contents (howto_table + rel->r_type,
+					  input_bfd, val, loc);
+	  if (rstat == bfd_reloc_overflow)
+	    overflow = true;
+	  else if (rstat != bfd_reloc_ok)
+	    abort ();
+	  break;
+	}
+
+      if (overflow)
+	{
+	  const char *name;
+	  char buf[SYMNMLEN + 1];
+
+	  if (symndx == -1)
+	    name = "*ABS*";
+	  else if (h != NULL)
+	    name = h->root.root.string;
+	  else if (sym == NULL)
+	    name = "*unknown*";
+	  else if (sym->_n._n_n._n_zeroes == 0
+		   && sym->_n._n_n._n_offset != 0)
+	    name = obj_coff_strings (input_bfd) + sym->_n._n_n._n_offset;
+	  else
+	    {
+	      strncpy (buf, sym->_n._n_name, SYMNMLEN);
+	      buf[SYMNMLEN] = '\0';
+	      name = buf;
+	    }
+
+	  if (! ((*info->callbacks->reloc_overflow)
+		 (info, name, howto_table[rel->r_type].name, (bfd_vma) 0,
+		  input_bfd, input_section,
+		  rel->r_vaddr - input_section->vma)))
+	    return false;
+	}
+    }     
+
+  return true;
+}
+
+#define coff_relocate_section coff_a29k_relocate_section
+
+/* We don't want to change the symndx of a R_IHCONST reloc, since it
+   is actually an addend, not a symbol index at all.  */
+
+/*ARGSUSED*/
+static boolean
+coff_a29k_adjust_symndx (obfd, info, ibfd, sec, irel, adjustedp)
+     bfd *obfd;
+     struct bfd_link_info *info;
+     bfd *ibfd;
+     asection *sec;
+     struct internal_reloc *irel;
+     boolean *adjustedp;
+{
+  if (irel->r_type == R_IHCONST)
+    *adjustedp = true;
+  else
+    *adjustedp = false;
+  return true;
+}
+
+#define coff_adjust_symndx coff_a29k_adjust_symndx
+
+#include "coffcode.h"
+
+const bfd_target a29kcoff_big_vec =
+{
+  "coff-a29k-big",		/* name */
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_BIG,		/* data byte order is big */
+  BFD_ENDIAN_BIG,		/* header byte order is big */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC /* section flags */
+   | SEC_LOAD | SEC_RELOC  
+   | SEC_READONLY ),
+  '_',				/* leading underscore */
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+  /* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32,   bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16,
+  /* hdrs */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32,   bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16,
+
+ {
+	    
+   _bfd_dummy_target,
+   coff_object_p,
+   bfd_generic_archive_p,
+   _bfd_dummy_target
+  },
+ {
+   bfd_false,
+   coff_mkobject,
+   _bfd_generic_mkarchive,
+   bfd_false
+  },
+ {
+   bfd_false,
+   coff_write_object_contents,
+   _bfd_write_archive_contents,
+   bfd_false
+  },
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE
+ };
@@ -0,0 +1,162 @@
+/* BFD back-end for Apollo 68000 COFF binaries.
+   Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+   By Troy Rollo (troy@cbme.unsw.edu.au)
+   Based on m68k standard COFF version Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+#include "coff/apollo.h"
+#include "coff/internal.h"
+#include "libcoff.h"
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (3)
+
+#ifdef ONLY_DECLARE_RELOCS
+extern reloc_howto_type apollocoff_howto_table[];
+#else
+reloc_howto_type apollocoff_howto_table[] = 
+{
+  HOWTO(R_RELBYTE,	       0,  0,  	8,  false, 0, complain_overflow_bitfield, 0, "8",	true, 0x000000ff,0x000000ff, false),
+  HOWTO(R_RELWORD,	       0,  1, 	16, false, 0, complain_overflow_bitfield, 0, "16",	true, 0x0000ffff,0x0000ffff, false),
+  HOWTO(R_RELLONG,	       0,  2, 	32, false, 0, complain_overflow_bitfield, 0, "32",	true, 0xffffffff,0xffffffff, false),
+  HOWTO(R_PCRBYTE,	       0,  0, 	8,  true,  0, complain_overflow_signed, 0, "DISP8",    true, 0x000000ff,0x000000ff, false),
+  HOWTO(R_PCRWORD,	       0,  1, 	16, true,  0, complain_overflow_signed, 0, "DISP16",   true, 0x0000ffff,0x0000ffff, false),
+  HOWTO(R_PCRLONG,	       0,  2, 	32, true,  0, complain_overflow_signed, 0, "DISP32",   true, 0xffffffff,0xffffffff, false),
+  HOWTO(R_RELLONG_NEG,	       0,  -2, 	32, false, 0, complain_overflow_bitfield, 0, "-32",	true, 0xffffffff,0xffffffff, false),
+};
+#endif /* not ONLY_DECLARE_RELOCS */
+
+#ifndef BADMAG
+#define BADMAG(x) M68KBADMAG(x)
+#endif
+#define APOLLO_M68 1		/* Customize coffcode.h */
+
+/* Turn a howto into a reloc number */
+
+#ifdef ONLY_DECLARE_RELOCS
+extern void apollo_rtype2howto PARAMS ((arelent *internal, int relocentry));
+extern int apollo_howto2rtype PARAMS ((reloc_howto_type *));
+#else
+void
+apollo_rtype2howto(internal, relocentry)
+     arelent *internal;
+     int relocentry;
+{
+  switch (relocentry) 
+  {
+   case R_RELBYTE:	internal->howto = apollocoff_howto_table + 0; break;
+   case R_RELWORD:	internal->howto = apollocoff_howto_table + 1; break;
+   case R_RELLONG:	internal->howto = apollocoff_howto_table + 2; break;
+   case R_PCRBYTE:	internal->howto = apollocoff_howto_table + 3; break;
+   case R_PCRWORD:	internal->howto = apollocoff_howto_table + 4; break;
+   case R_PCRLONG:	internal->howto = apollocoff_howto_table + 5; break;
+   case R_RELLONG_NEG:	internal->howto = apollocoff_howto_table + 6; break;
+  }
+}
+
+int 
+apollo_howto2rtype (internal)
+     reloc_howto_type *internal;
+{
+  if (internal->pc_relative) 
+  {
+    switch (internal->bitsize) 
+    {
+     case 32: return R_PCRLONG;
+     case 16: return R_PCRWORD;
+     case 8: return R_PCRBYTE;
+    }
+  }
+  else
+  {
+    switch (internal->bitsize)
+     {
+      case 32: return R_RELLONG;
+      case 16: return R_RELWORD;
+      case 8: return R_RELBYTE;
+     }
+  }
+  return R_RELLONG;    
+}
+#endif /* not ONLY_DECLARE_RELOCS */
+
+#define RTYPE2HOWTO(internal, relocentry) \
+  apollo_rtype2howto(internal, (relocentry)->r_type)
+
+#define SELECT_RELOC(external, internal) \
+  external.r_type = apollo_howto2rtype(internal);
+
+#include "coffcode.h"
+
+const bfd_target 
+#ifdef TARGET_SYM
+  TARGET_SYM =
+#else
+  apollocoff_vec =
+#endif
+{
+#ifdef TARGET_NAME
+  TARGET_NAME,
+#else
+  "apollo-m68k",			/* name */
+#endif
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_BIG,		/* data byte order is big */
+  BFD_ENDIAN_BIG,		/* header byte order is big */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+#ifdef NAMES_HAVE_UNDERSCORE
+  '_',
+#else
+  0,				/* leading underscore */
+#endif
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
+
+ {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+   bfd_generic_archive_p, _bfd_dummy_target},
+ {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
+   bfd_false},
+ {bfd_false, coff_write_object_contents, /* bfd_write_contents */
+   _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE
+ };
@@ -0,0 +1,537 @@
+/* BFD back-end for ARM COFF files.
+   Copyright 1990, 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+
+#include "coff/arm.h"
+
+#include "coff/internal.h"
+
+#ifdef COFF_WITH_PE
+#include "coff/pe.h"
+#endif
+
+#include "libcoff.h"
+
+static bfd_reloc_status_type
+aoutarm_fix_pcrel_26_done PARAMS ((bfd *, arelent *, asymbol *, PTR,
+				  asection *, bfd *, char **));
+
+static bfd_reloc_status_type
+aoutarm_fix_pcrel_26 PARAMS ((bfd *, arelent *, asymbol *, PTR,
+			     asection *, bfd *, char **));
+
+
+static bfd_reloc_status_type coff_arm_reloc 
+  PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+
+
+/* Used by the assembler. */
+static bfd_reloc_status_type
+coff_arm_reloc (abfd, reloc_entry, symbol, data, input_section, output_bfd,
+		 error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  symvalue diff;
+  if (output_bfd == (bfd *) NULL)
+    return bfd_reloc_continue;
+
+  diff = reloc_entry->addend;
+
+#define DOIT(x) \
+  x = ((x & ~howto->dst_mask) | (((x & howto->src_mask) + diff) & howto->dst_mask))
+
+    if (diff != 0)
+      {
+	reloc_howto_type *howto = reloc_entry->howto;
+	unsigned char *addr = (unsigned char *) data + reloc_entry->address;
+
+	switch (howto->size)
+	  {
+	  case 0:
+	    {
+	      char x = bfd_get_8 (abfd, addr);
+	      DOIT (x);
+	      bfd_put_8 (abfd, x, addr);
+	    }
+	    break;
+
+	  case 1:
+	    {
+	      short x = bfd_get_16 (abfd, addr);
+	      DOIT (x);
+	      bfd_put_16 (abfd, x, addr);
+	    }
+	    break;
+
+	  case 2:
+	    {
+	      long x = bfd_get_32 (abfd, addr);
+	      DOIT (x);
+	      bfd_put_32 (abfd, x, addr);
+	    }
+	    break;
+
+	  default:
+	    abort ();
+	  }
+      }
+
+  /* Now let bfd_perform_relocation finish everything up.  */
+  return bfd_reloc_continue;
+}
+
+#ifndef PCRELOFFSET
+#define PCRELOFFSET true
+#endif
+
+static reloc_howto_type aoutarm_std_reloc_howto[] = 
+{
+  /* type              rs size bsz  pcrel bitpos ovrf                     sf name     part_inpl readmask  setmask    pcdone */
+  HOWTO(0,			/* type */
+	0,			/* rs */
+	0,			/* size */
+	8,			/* bsz */
+	false,			/* pcrel */
+	0,			/* bitpos */
+	complain_overflow_bitfield, /* ovf */
+	coff_arm_reloc,		/* sf */
+	"8",			/*name */
+        true,			/* partial */
+	0x000000ff,		/*read mask */
+	0x000000ff,		/* setmask */
+	PCRELOFFSET		/* pcdone */),
+  HOWTO(1,  
+	0, 
+	1, 
+	16, 
+	false,
+	0,
+	complain_overflow_bitfield,
+	coff_arm_reloc,
+	"16", 
+	true,
+	0x0000ffff,
+	0x0000ffff, 
+	PCRELOFFSET),
+  HOWTO( 2, 
+	0,
+	2, 
+	32,
+	false,
+	0,
+	complain_overflow_bitfield,
+	coff_arm_reloc,
+	"32",
+        true,
+	0xffffffff,
+	0xffffffff,
+	PCRELOFFSET),
+  HOWTO( 3,
+	2,
+	2,
+	26,
+	true,
+	0,
+	complain_overflow_signed,
+	aoutarm_fix_pcrel_26 ,
+	"ARM26",
+	false,
+	0x00ffffff,
+	0x00ffffff, 
+	PCRELOFFSET),
+  HOWTO( 4,        
+	0,
+	0,
+	8, 
+	true,
+	0,
+	complain_overflow_signed, 
+	coff_arm_reloc,
+	"DISP8",  
+	true,
+	0x000000ff,
+	0x000000ff,
+	true),
+  HOWTO( 5, 
+	0,
+	1,
+	16,
+	true,
+	0,
+	complain_overflow_signed, 
+	coff_arm_reloc,
+	"DISP16",
+	true,
+	0x0000ffff,
+	0x0000ffff,
+	true),
+  HOWTO( 6,
+	0,
+	2,
+	32,
+	true,
+	0,
+	complain_overflow_signed, 
+ 	coff_arm_reloc,
+	"DISP32",
+	true,
+	0xffffffff,
+	0xffffffff,
+	true),
+  HOWTO( 7,  
+	2, 
+	2,
+	26,
+	false,
+	0,
+	complain_overflow_signed,
+	aoutarm_fix_pcrel_26_done, 
+	"ARM26D",
+	true,
+	0x00ffffff,
+	0x00ffffff, 
+	false),
+  {-1},
+  HOWTO( 9,
+	0,
+	-1,
+	16,
+	false,
+	0, 
+	complain_overflow_bitfield,
+	coff_arm_reloc,
+	"NEG16",
+        true, 
+	0x0000ffff,
+	0x0000ffff, 
+	false),
+  HOWTO( 10, 
+	0, 
+	-2,
+	32,
+	false,
+	0,
+	complain_overflow_bitfield,
+	coff_arm_reloc,
+	"NEG32",
+        true,
+	0xffffffff,
+	0xffffffff,
+	false),
+  HOWTO( 11, 
+	0,
+	2, 
+	32,
+	false,
+	0,
+	complain_overflow_bitfield,
+	coff_arm_reloc,
+	"rva32",
+        true,
+	0xffffffff,
+	0xffffffff,
+	PCRELOFFSET),
+};
+#ifdef COFF_WITH_PE
+/* Return true if this relocation should
+   appear in the output .reloc section. */
+
+static boolean in_reloc_p (abfd, howto)
+     bfd * abfd;
+     reloc_howto_type *howto;
+{
+  return !howto->pc_relative && howto->type != 11;
+}     
+#endif
+
+
+#define RTYPE2HOWTO(cache_ptr, dst) \
+	    (cache_ptr)->howto = aoutarm_std_reloc_howto + (dst)->r_type;
+
+#define coff_rtype_to_howto coff_arm_rtype_to_howto
+
+static reloc_howto_type *
+coff_arm_rtype_to_howto (abfd, sec, rel, h, sym, addendp)
+     bfd *abfd;
+     asection *sec;
+     struct internal_reloc *rel;
+     struct coff_link_hash_entry *h;
+     struct internal_syment *sym;
+     bfd_vma *addendp;
+{
+  reloc_howto_type *howto;
+
+  howto = aoutarm_std_reloc_howto + rel->r_type;
+
+  if (rel->r_type == 11)
+    {
+      *addendp -= pe_data(sec->output_section->owner)->pe_opthdr.ImageBase;
+    }
+  return howto;
+
+}
+/* Used by the assembler. */
+
+static bfd_reloc_status_type
+aoutarm_fix_pcrel_26_done (abfd, reloc_entry, symbol, data, input_section,
+			  output_bfd, error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  /* This is dead simple at present.  */
+  return bfd_reloc_ok;
+}
+
+/* Used by the assembler. */
+
+static bfd_reloc_status_type
+aoutarm_fix_pcrel_26 (abfd, reloc_entry, symbol, data, input_section,
+		     output_bfd, error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  bfd_vma relocation;
+  bfd_size_type addr = reloc_entry->address;
+  long target = bfd_get_32 (abfd, (bfd_byte *) data + addr);
+  bfd_reloc_status_type flag = bfd_reloc_ok;
+  
+  /* If this is an undefined symbol, return error */
+  if (symbol->section == &bfd_und_section
+      && (symbol->flags & BSF_WEAK) == 0)
+    return output_bfd ? bfd_reloc_continue : bfd_reloc_undefined;
+
+  /* If the sections are different, and we are doing a partial relocation,
+     just ignore it for now.  */
+  if (symbol->section->name != input_section->name
+      && output_bfd != (bfd *)NULL)
+    return bfd_reloc_continue;
+
+  relocation = (target & 0x00ffffff) << 2;
+  relocation = (relocation ^ 0x02000000) - 0x02000000; /* Sign extend */
+  relocation += symbol->value;
+  relocation += symbol->section->output_section->vma;
+  relocation += symbol->section->output_offset;
+  relocation += reloc_entry->addend;
+  relocation -= input_section->output_section->vma;
+  relocation -= input_section->output_offset;
+  relocation -= addr;
+  if (relocation & 3)
+    return bfd_reloc_overflow;
+
+  /* Check for overflow */
+  if (relocation & 0x02000000)
+    {
+      if ((relocation & ~0x03ffffff) != ~0x03ffffff)
+	flag = bfd_reloc_overflow;
+    }
+  else if (relocation & ~0x03ffffff)
+    flag = bfd_reloc_overflow;
+
+  target &= ~0x00ffffff;
+  target |= (relocation >> 2) & 0x00ffffff;
+  bfd_put_32 (abfd, target, (bfd_byte *) data + addr);
+
+  /* Now the ARM magic... Change the reloc type so that it is marked as done.
+     Strictly this is only necessary if we are doing a partial relocation.  */
+  reloc_entry->howto = &aoutarm_std_reloc_howto[7];
+
+  return flag;
+}
+
+
+static CONST struct reloc_howto_struct *
+arm_reloc_type_lookup(abfd,code)
+      bfd *abfd;
+      bfd_reloc_code_real_type code;
+{
+#define ASTD(i,j)       case i: return &aoutarm_std_reloc_howto[j]
+  if (code == BFD_RELOC_CTOR)
+    switch (bfd_get_arch_info (abfd)->bits_per_address)
+      {
+      case 32:
+        code = BFD_RELOC_32;
+        break;
+      default: return (CONST struct reloc_howto_struct *) 0;
+      }
+
+  switch (code)
+    {
+      ASTD (BFD_RELOC_16, 1);
+      ASTD (BFD_RELOC_32, 2);
+      ASTD (BFD_RELOC_ARM_PCREL_BRANCH, 3);
+      ASTD (BFD_RELOC_8_PCREL, 4);
+      ASTD (BFD_RELOC_16_PCREL, 5);
+      ASTD (BFD_RELOC_32_PCREL, 6);
+      ASTD (BFD_RELOC_RVA, 11);
+    default: return (CONST struct reloc_howto_struct *) 0;
+    }
+}
+
+
+#define coff_bfd_reloc_type_lookup arm_reloc_type_lookup
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (2)
+#define COFF_PAGE_SIZE 0x1000
+/* Turn a howto into a reloc  nunmber */
+
+#define SELECT_RELOC(x,howto) { x.r_type = howto->type; }
+#define BADMAG(x) ARMBADMAG(x)
+#define ARM 1			/* Customize coffcode.h */
+
+
+/* We use the special COFF backend linker.  */
+#define coff_relocate_section _bfd_coff_generic_relocate_section
+
+
+#include "coffcode.h"
+
+const bfd_target
+#ifdef TARGET_LITTLE_SYM
+TARGET_LITTLE_SYM =
+#else
+armcoff_little_vec =
+#endif
+{
+#ifdef TARGET_LITTLE_NAME
+  TARGET_LITTLE_NAME,
+#else
+  "coff-arm-little",
+#endif
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_LITTLE,		/* data byte order is little */
+  BFD_ENDIAN_LITTLE,		/* header byte order is little */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+#ifdef TARGET_UNDERSCORE
+  TARGET_UNDERSCORE,		/* leading underscore */
+#else
+  0,				/* leading underscore */
+#endif
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
+
+/* Note that we allow an object file to be treated as a core file as well. */
+    {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+       bfd_generic_archive_p, coff_object_p},
+    {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
+       bfd_false},
+    {bfd_false, coff_write_object_contents, /* bfd_write_contents */
+       _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
+
+const bfd_target
+#ifdef TARGET_BIG_SYM
+TARGET_BIG_SYM =
+#else
+armcoff_big_vec =
+#endif
+{
+#ifdef TARGET_BIG_NAME
+  TARGET_BIG_NAME,
+#else
+  "coff-arm-big",
+#endif
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_BIG,		/* data byte order is big */
+  BFD_ENDIAN_BIG,		/* header byte order is big */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+#ifdef TARGET_UNDERSCORE
+  TARGET_UNDERSCORE,		/* leading underscore */
+#else
+  0,				/* leading underscore */
+#endif
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
+
+/* Note that we allow an object file to be treated as a core file as well. */
+    {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+       bfd_generic_archive_p, coff_object_p},
+    {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
+       bfd_false},
+    {bfd_false, coff_write_object_contents, /* bfd_write_contents */
+       _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
@@ -0,0 +1,332 @@
+/* BFD back-end for Apple M68K COFF A/UX 3.x files.
+   Copyright 1996 Free Software Foundation, Inc.
+   Portions written by Richard Henderson <rth@tamu.edu>,
+   COMMON symbol munging cribbed from cf-m68klynx.c which was
+   written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_SYM	m68kaux_coff_vec
+#define TARGET_NAME	"coff-m68k-aux"
+
+#ifndef TARG_AUX
+#define TARG_AUX
+#endif
+
+#define COFF_LONG_FILENAMES
+
+/* 4k pages */
+#define COFF_PAGE_SIZE 0x1000
+
+/* On AUX, a STYP_NOLOAD|STYP_BSS section is part of a shared library. */
+#define BSS_NOLOAD_IS_SHARED_LIBRARY
+
+#define _bfd_m68kcoff_howto_table _bfd_m68kaux_howto_table	
+#define _bfd_m68kcoff_rtype2howto _bfd_m68kaux_rtype2howto	
+#define _bfd_m68kcoff_howto2rtype _bfd_m68kaux_howto2rtype	
+#define _bfd_m68kcoff_reloc_type_lookup _bfd_m68kaux_reloc_type_lookup
+
+/* Rather than change names lots of places, reuse the same hack */
+#define LYNX_SPECIAL_FN _bfd_m68kaux_special_fn
+
+#include "bfd.h"
+#include "sysdep.h"
+
+#ifdef ANSI_PROTOTYPES
+struct internal_reloc;
+struct coff_link_hash_entry;
+struct internal_syment;
+#endif
+
+
+static bfd_reloc_status_type _bfd_m68kaux_special_fn
+  PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+static reloc_howto_type *coff_m68k_aux_rtype_to_howto
+  PARAMS ((bfd *, asection *, struct internal_reloc *,
+	   struct coff_link_hash_entry *, struct internal_syment *,
+	   bfd_vma *));
+static boolean coff_m68k_aux_link_add_one_symbol
+  PARAMS ((struct bfd_link_info *, bfd *, const char *, flagword, 
+           asection *, bfd_vma, const char *, boolean, boolean, 
+           struct bfd_link_hash_entry **));
+
+
+#define coff_rtype_to_howto coff_m68k_aux_rtype_to_howto
+#define coff_link_add_one_symbol coff_m68k_aux_link_add_one_symbol
+
+
+/* Compute the addend of a reloc.  If the reloc is to a common symbol,
+   the object file contains the value of the common symbol.  By the
+   time this is called, the linker may be using a different symbol
+   from a different object file with a different value.  Therefore, we
+   hack wildly to locate the original symbol from this file so that we
+   can make the correct adjustment.  This macro sets coffsym to the
+   symbol from the original file, and uses it to set the addend value
+   correctly.  If this is not a common symbol, the usual addend
+   calculation is done, except that an additional tweak is needed for
+   PC relative relocs.
+   FIXME: This macro refers to symbols and asect; these are from the
+   calling function, not the macro arguments.  */
+
+#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr)		\
+  {								\
+    coff_symbol_type *coffsym = (coff_symbol_type *) NULL;	\
+    if (ptr && bfd_asymbol_bfd (ptr) != abfd)			\
+      coffsym = (obj_symbols (abfd)				\
+	         + (cache_ptr->sym_ptr_ptr - symbols));		\
+    else if (ptr)						\
+      coffsym = coff_symbol_from (abfd, ptr);			\
+    if (coffsym != (coff_symbol_type *) NULL			\
+	&& coffsym->native->u.syment.n_scnum == 0)		\
+      cache_ptr->addend = - coffsym->native->u.syment.n_value;	\
+    else if (ptr && bfd_asymbol_bfd (ptr) == abfd		\
+	     && ptr->section != (asection *) NULL)		\
+      cache_ptr->addend = - (ptr->section->vma + ptr->value);	\
+    else							\
+      cache_ptr->addend = 0;					\
+    if (ptr && (reloc.r_type == R_PCRBYTE			\
+		|| reloc.r_type == R_PCRWORD			\
+		|| reloc.r_type == R_PCRLONG))			\
+      cache_ptr->addend += asect->vma;				\
+  }
+
+
+
+#include "coff/aux-coff.h"  /* override coff/internal.h and coff/m68k.h */
+#include "coff-m68k.c"
+
+
+
+/* For some reason when using m68k COFF the value stored in the .text
+   section for a reference to a common symbol is the value itself plus
+   any desired offset.  (taken from work done by Ian Taylor, Cygnus Support,
+   for I386 COFF).  */
+
+/* If we are producing relocateable output, we need to do some
+   adjustments to the object file that are not done by the
+   bfd_perform_relocation function.  This function is called by every
+   reloc type to make any required adjustments.  */
+
+static bfd_reloc_status_type
+_bfd_m68kaux_special_fn (abfd, reloc_entry, symbol, data, input_section,
+			  output_bfd, error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  symvalue diff;
+
+  if (output_bfd == (bfd *) NULL)
+    return bfd_reloc_continue;
+
+  if (bfd_is_com_section (symbol->section))
+    {
+      /* We are relocating a common symbol.  The current value in the
+	 object file is ORIG + OFFSET, where ORIG is the value of the
+	 common symbol as seen by the object file when it was compiled
+	 (this may be zero if the symbol was undefined) and OFFSET is
+	 the offset into the common symbol (normally zero, but may be
+	 non-zero when referring to a field in a common structure).
+	 ORIG is the negative of reloc_entry->addend, which is set by
+	 the CALC_ADDEND macro below.  We want to replace the value in
+	 the object file with NEW + OFFSET, where NEW is the value of
+	 the common symbol which we are going to put in the final
+	 object file.  NEW is symbol->value.  */
+      diff = symbol->value + reloc_entry->addend;
+    }
+  else
+    {
+      /* For some reason bfd_perform_relocation always effectively
+	 ignores the addend for a COFF target when producing
+	 relocateable output.  This seems to be always wrong for 386
+	 COFF, so we handle the addend here instead.  */
+      diff = reloc_entry->addend;
+    }
+
+#define DOIT(x) \
+  x = ((x & ~howto->dst_mask) | \
+       (((x & howto->src_mask) + diff) & howto->dst_mask))
+
+  if (diff != 0)
+    {
+      reloc_howto_type *howto = reloc_entry->howto;
+      unsigned char *addr = (unsigned char *) data + reloc_entry->address;
+
+      switch (howto->size)
+	{
+	case 0:
+	  {
+	    char x = bfd_get_8 (abfd, addr);
+	    DOIT (x);
+	    bfd_put_8 (abfd, x, addr);
+	  }
+	  break;
+
+	case 1:
+	  {
+	    short x = bfd_get_16 (abfd, addr);
+	    DOIT (x);
+	    bfd_put_16 (abfd, x, addr);
+	  }
+	  break;
+
+	case 2:
+	  {
+	    long x = bfd_get_32 (abfd, addr);
+	    DOIT (x);
+	    bfd_put_32 (abfd, x, addr);
+	  }
+	  break;
+
+	default:
+	  abort ();
+	}
+    }
+
+  /* Now let bfd_perform_relocation finish everything up.  */
+  return bfd_reloc_continue;
+}
+
+
+/* coff-m68k.c uses the special COFF backend linker.  We need to
+   adjust common symbols.  */
+
+/*ARGSUSED*/
+static reloc_howto_type *
+coff_m68k_aux_rtype_to_howto (abfd, sec, rel, h, sym, addendp)
+     bfd *abfd;
+     asection *sec;
+     struct internal_reloc *rel;
+     struct coff_link_hash_entry *h;
+     struct internal_syment *sym;
+     bfd_vma *addendp;
+{
+  arelent relent;
+  reloc_howto_type *howto;
+
+  RTYPE2HOWTO (&relent, rel);
+
+  howto = relent.howto;
+
+  if (sym != NULL && sym->n_scnum == 0 && sym->n_value != 0)
+    {
+      /* This is a common symbol.  The section contents include the
+	 size (sym->n_value) as an addend.  The relocate_section
+	 function will be adding in the final value of the symbol.  We
+	 need to subtract out the current size in order to get the
+	 correct result.  */
+      BFD_ASSERT (h != NULL);
+      *addendp -= sym->n_value;
+    }
+
+  /* If the output symbol is common (in which case this must be a
+     relocateable link), we need to add in the final size of the
+     common symbol.  */
+  if (h != NULL && h->root.type == bfd_link_hash_common)
+    *addendp += h->root.u.c.size;
+
+  return howto;
+}
+
+
+/* We need non-absolute symbols to override absolute symbols.  This
+   mirrors Apple's "solution" to let a static library symbol override
+   a shared library symbol.  On the whole not a good thing, given how
+   shared libraries work here, but can work if you are careful with
+   what you include in the shared object. */
+
+boolean
+coff_m68k_aux_link_add_one_symbol (info, abfd, name, flags, section, value,
+				   string, copy, collect, hashp)
+     struct bfd_link_info *info;
+     bfd *abfd;
+     const char *name;
+     flagword flags;
+     asection *section;
+     bfd_vma value;
+     const char *string;
+     boolean copy;
+     boolean collect;
+     struct bfd_link_hash_entry **hashp;
+{
+  struct bfd_link_hash_entry *h;
+
+  if ((flags & (BSF_WARNING | BSF_CONSTRUCTOR | BSF_WEAK)) == 0 &&
+      !bfd_is_und_section (section) &&
+      !bfd_is_com_section (section))
+    {
+      /* The new symbol is a definition or an indirect definition */
+
+      /* This bit copied from linker.c */
+      if (hashp != NULL && *hashp != NULL)
+	{
+	  h = *hashp;
+	  BFD_ASSERT (strcmp (h->root.string, name) == 0);
+	}
+      else
+	{
+	  h = bfd_link_hash_lookup (info->hash, name, true, copy, false);
+	  if (h == NULL)
+	    {
+	      if (hashp != NULL)
+		*hashp = NULL;
+	      return false;
+	    }
+	}
+
+      if (info->notice_hash != (struct bfd_hash_table *) NULL
+	  && (bfd_hash_lookup (info->notice_hash, name, false, false)
+	      != (struct bfd_hash_entry *) NULL))
+	{
+	  if (! (*info->callbacks->notice) (info, name, abfd, section, value))
+	    return false;
+	}
+
+      if (hashp != (struct bfd_link_hash_entry **) NULL)
+	*hashp = h;
+      /* end duplication from linker.c */
+
+      if (h->type == bfd_link_hash_defined
+	  || h->type == bfd_link_hash_indirect)
+	{
+	  asection *msec;
+
+	  if (h->type == bfd_link_hash_defined)
+	    msec = h->u.def.section;
+	  else
+	    msec = bfd_ind_section_ptr;
+
+	  if (bfd_is_abs_section (msec) && !bfd_is_abs_section (section))
+	    {
+	      h->u.def.section = section;
+	      h->u.def.value = value;
+	      return true;
+	    }
+	  else if (bfd_is_abs_section (section) && !bfd_is_abs_section (msec))
+	    return true;
+	}
+    }
+
+  /* If we didn't exit early, finish processing in the generic routine */
+  return _bfd_generic_link_add_one_symbol (info, abfd, name, flags, section,
+					   value, string, copy, collect,
+					   hashp);
+}
@@ -0,0 +1,25 @@
+/* BFD back-end for Intel 386 COFF files (go32 variant).
+   Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+   Written by DJ Delorie.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_SYM		go32coff_vec
+#define TARGET_NAME		"coff-go32"
+#define TARGET_UNDERSCORE	'_'
+
+#include "coff-i386.c"
@@ -0,0 +1,650 @@
+/* BFD back-end for Hitachi H8/300 COFF binaries.
+   Copyright 1990, 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+   Written by Steve Chamberlain, <sac@cygnus.com>.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "obstack.h"
+#include "libbfd.h"
+#include "bfdlink.h"
+#include "genlink.h"
+#include "coff/h8300.h"
+#include "coff/internal.h"
+#include "libcoff.h"
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
+
+
+/* special handling for H8/300 relocs.
+   We only come here for pcrel stuff and return normally if not an -r link.
+   When doing -r, we can't do any arithmetic for the pcrel stuff, because
+   the code in reloc.c assumes that we can manipulate the targets of
+   the pcrel branches.  This isn't so, since the H8/300 can do relaxing, 
+   which means that the gap after the instruction may not be enough to
+   contain the offset required for the branch, so we have to use the only
+   the addend until the final link */
+
+static bfd_reloc_status_type
+special (abfd, reloc_entry, symbol, data, input_section, output_bfd,
+		 error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  if (output_bfd == (bfd *) NULL)
+    return bfd_reloc_continue;
+
+  return bfd_reloc_ok;
+}
+
+static reloc_howto_type howto_table[] =
+{
+  HOWTO (R_RELBYTE, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "8", false, 0x000000ff, 0x000000ff, false),
+  HOWTO (R_RELWORD, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "16", false, 0x0000ffff, 0x0000ffff, false),
+  HOWTO (R_RELLONG, 0, 2, 32, false, 0, complain_overflow_bitfield, special, "32", false, 0xffffffff, 0xffffffff, false),
+  HOWTO (R_PCRBYTE, 0, 0, 8, true, 0, complain_overflow_signed, special, "DISP8", false, 0x000000ff, 0x000000ff, true),
+  HOWTO (R_PCRWORD, 0, 1, 16, true, 0, complain_overflow_signed, special, "DISP16", false, 0x0000ffff, 0x0000ffff, true),
+  HOWTO (R_PCRLONG, 0, 2, 32, true, 0, complain_overflow_signed, special, "DISP32", false, 0xffffffff, 0xffffffff, true),
+  HOWTO (R_MOVB1, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "16/8", false, 0x0000ffff, 0x0000ffff, false),
+  HOWTO (R_MOVB2, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "8/16", false, 0x0000ffff, 0x0000ffff, false),
+  HOWTO (R_JMP1, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "16/pcrel", false, 0x0000ffff, 0x0000ffff, false),
+  HOWTO (R_JMP2, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "pcrecl/16", false, 0x000000ff, 0x000000ff, false),
+
+
+  HOWTO (R_JMPL1, 0, 2, 32, false, 0, complain_overflow_bitfield, special, "24/pcrell", false, 0x00ffffff, 0x00ffffff, false),
+  HOWTO (R_JMPL_B8, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "pc8/24", false, 0x000000ff, 0x000000ff, false),
+
+  HOWTO (R_MOVLB1, 0, 1, 16, false, 0, complain_overflow_bitfield,special, "24/8", false, 0x0000ffff, 0x0000ffff, false),
+  HOWTO (R_MOVLB2, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "8/24", false, 0x0000ffff, 0x0000ffff, false),
+
+  /* An indirect reference to a function.  This causes the function's address
+     to be added to the function vector in lo-mem and puts the address of
+     the function vector's entry in the jsr instruction.  */
+  HOWTO (R_MEM_INDIRECT, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "8/indirect", false, 0x000000ff, 0x000000ff, false),
+
+};
+
+
+/* Turn a howto into a reloc number */
+
+#define SELECT_RELOC(x,howto) \
+  { x.r_type = select_reloc(howto); }
+
+#define BADMAG(x) (H8300BADMAG(x)&& H8300HBADMAG(x))
+#define H8300 1			/* Customize coffcode.h */
+#define __A_MAGIC_SET__
+
+
+
+/* Code to swap in the reloc */
+#define SWAP_IN_RELOC_OFFSET   bfd_h_get_32
+#define SWAP_OUT_RELOC_OFFSET bfd_h_put_32
+#define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
+  dst->r_stuff[0] = 'S'; \
+  dst->r_stuff[1] = 'C';
+
+
+static int
+select_reloc (howto)
+     reloc_howto_type *howto;
+{
+  return howto->type;
+}
+
+/* Code to turn a r_type into a howto ptr, uses the above howto table
+   */
+
+static void
+rtype2howto (internal, dst)
+     arelent *internal;
+     struct internal_reloc *dst;
+{
+  switch (dst->r_type)
+    {
+    case R_RELBYTE:
+      internal->howto = howto_table + 0;
+      break;
+    case R_RELWORD:
+      internal->howto = howto_table + 1;
+      break;
+    case R_RELLONG:
+      internal->howto = howto_table + 2;
+      break;
+    case R_PCRBYTE:
+      internal->howto = howto_table + 3;
+      break;
+    case R_PCRWORD:
+      internal->howto = howto_table + 4;
+      break;
+    case R_PCRLONG:
+      internal->howto = howto_table + 5;
+      break;
+    case R_MOVB1:
+      internal->howto = howto_table + 6;
+      break;
+    case R_MOVB2:
+      internal->howto = howto_table + 7;
+      break;
+    case R_JMP1:
+      internal->howto = howto_table + 8;
+      break;
+    case R_JMP2:
+      internal->howto = howto_table + 9;
+      break;
+    case R_JMPL1:
+      internal->howto = howto_table + 10;
+      break;
+    case R_JMPL_B8:
+      internal->howto = howto_table + 11;
+      break;
+    case R_MOVLB1:
+      internal->howto = howto_table + 12;
+      break;
+    case R_MOVLB2:
+      internal->howto = howto_table + 13;
+      break;
+    case R_MEM_INDIRECT:
+      internal->howto = howto_table + 14;
+      break;
+    default:
+      abort ();
+      break;
+    }
+}
+
+#define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
+
+
+/* Perform any necessaru magic to the addend in a reloc entry */
+
+
+#define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
+ cache_ptr->addend =  ext_reloc.r_offset;
+
+
+#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
+ reloc_processing(relent, reloc, symbols, abfd, section)
+
+static void
+reloc_processing (relent, reloc, symbols, abfd, section)
+     arelent * relent;
+     struct internal_reloc *reloc;
+     asymbol ** symbols;
+     bfd * abfd;
+     asection * section;
+{
+  relent->address = reloc->r_vaddr;
+  rtype2howto (relent, reloc);
+
+  if (((int) reloc->r_symndx) > 0)
+    {
+      relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
+    }
+  else
+    {
+      relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
+    }
+
+
+
+  relent->addend = reloc->r_offset;
+
+  relent->address -= section->vma;
+  /*  relent->section = 0;*/
+}
+
+
+static int
+h8300_reloc16_estimate(abfd, input_section, reloc, shrink, link_info)
+     bfd *abfd;
+     asection *input_section;
+     arelent *reloc;
+     unsigned int shrink;
+     struct bfd_link_info *link_info;
+{
+  bfd_vma value;  
+  bfd_vma dot;
+  bfd_vma gap;
+
+  /* The address of the thing to be relocated will have moved back by 
+   the size of the shrink  - but we don't change reloc->address here,
+   since we need it to know where the relocation lives in the source
+   uncooked section */
+
+  /*  reloc->address -= shrink;   conceptual */
+
+  bfd_vma address = reloc->address - shrink;
+  
+
+  switch (reloc->howto->type)
+    {     
+    case R_MOVB2:
+    case R_JMP2:
+      shrink+=2;
+      break;
+
+      /* Thing is a move one byte */
+    case R_MOVB1:
+      value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+
+      if (value >= 0xff00)
+	{ 
+
+	  /* Change the reloc type from 16bit, possible 8 to 8bit
+	     possible 16 */
+	  reloc->howto = reloc->howto + 1;	  
+	  /* The place to relc moves back by one */
+	  /* This will be two bytes smaller in the long run */
+	  shrink +=2 ;
+	  bfd_perform_slip(abfd, 2, input_section, address);
+	}      
+
+      break;
+      /* This is the 24 bit branch which could become an 8 bitter, 
+       the relocation points to the first byte of the insn, not the
+       actual data */
+
+    case R_JMPL1:
+      value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+	
+      dot = input_section->output_section->vma +
+	input_section->output_offset + address;
+  
+      /* See if the address we're looking at within 127 bytes of where
+	 we are, if so then we can use a small branch rather than the
+	 jump we were going to */
+
+      gap = value - dot ;
+  
+      if (-120 < (long)gap && (long)gap < 120 )
+	{ 
+
+	  /* Change the reloc type from 24bit, possible 8 to 8bit
+	     possible 32 */
+	  reloc->howto = reloc->howto + 1;	  
+	  /* This will be two bytes smaller in the long run */
+	  shrink +=2 ;
+	  bfd_perform_slip(abfd, 2, input_section, address);
+	}
+      break;
+
+    case R_JMP1:
+
+      value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+	
+      dot = input_section->output_section->vma +
+	input_section->output_offset + address;
+  
+      /* See if the address we're looking at within 127 bytes of where
+	 we are, if so then we can use a small branch rather than the
+	 jump we were going to */
+
+      gap = value - (dot - shrink);
+  
+
+      if (-120 < (long)gap && (long)gap < 120 )
+	{ 
+
+	  /* Change the reloc type from 16bit, possible 8 to 8bit
+	     possible 16 */
+	  reloc->howto = reloc->howto + 1;	  
+	  /* The place to relc moves back by one */
+
+	  /* This will be two bytes smaller in the long run */
+	  shrink +=2 ;
+	  bfd_perform_slip(abfd, 2, input_section, address);
+	}
+      break;
+    }
+
+  
+  return shrink;
+}
+
+
+/* First phase of a relaxing link */
+
+/* Reloc types
+   large		small
+   R_MOVB1		R_MOVB2		mov.b with 16bit or 8 bit address
+   R_JMP1		R_JMP2		jmp or pcrel branch
+   R_JMPL1		R_JMPL_B8	24jmp or pcrel branch
+   R_MOVLB1		R_MOVLB2	24 or 8 bit reloc for mov.b
+
+*/
+
+static void
+h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
+			   dst_ptr)
+     bfd *abfd;
+     struct bfd_link_info *link_info;
+     struct bfd_link_order *link_order;
+     arelent *reloc;
+     bfd_byte *data;
+     unsigned int *src_ptr;
+     unsigned int *dst_ptr;
+{
+  unsigned int src_address = *src_ptr;
+  unsigned int dst_address = *dst_ptr;
+  asection *input_section = link_order->u.indirect.section;
+
+  switch (reloc->howto->type)
+    {
+      /* A 24 bit branch which could be a 8 bit pcrel, really pointing to
+	 the byte before the 24bit hole, so we can treat it as a 32bit pointer */
+    case R_PCRBYTE:
+      {
+	bfd_vma dot = link_order->offset 
+	  + dst_address 
+	    + link_order->u.indirect.section->output_section->vma;
+	int gap = (bfd_coff_reloc16_get_value (reloc, link_info, input_section)
+		   - dot);
+	if (gap > 127 || gap < -128)
+	  {
+	    if (! ((*link_info->callbacks->reloc_overflow)
+		   (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+		    reloc->howto->name, reloc->addend, input_section->owner,
+		    input_section, reloc->address)))
+	      abort ();
+	  }
+	gap &= ~1;
+	bfd_put_8 (abfd, gap, data + dst_address);
+	dst_address++;
+	src_address++;
+
+	break;
+      }
+    case R_PCRWORD:
+      {
+	bfd_vma dot = link_order->offset 
+	  + dst_address 
+	    + link_order->u.indirect.section->output_section->vma;
+	int gap = (bfd_coff_reloc16_get_value (reloc, link_info, input_section)
+		   - dot) - 1;
+	if (gap > 32767 || gap < -32768)
+	  {
+	    if (! ((*link_info->callbacks->reloc_overflow)
+		   (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+		    reloc->howto->name, reloc->addend, input_section->owner,
+		    input_section, reloc->address)))
+	      abort ();
+	  }
+
+	bfd_put_16 (abfd, gap, data + dst_address);
+	dst_address+=2;
+	src_address+=2;
+
+	break;
+      }
+
+    case R_MEM_INDIRECT: 	/* Temporary  */
+    case R_RELBYTE:
+      {
+	unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
+						       input_section);
+	if (gap < 0xff 
+	    || (gap >= 0x0000ff00
+	        && gap <= 0x0000ffff)
+  	    || (   gap >= 0x00ffff00 
+		&& gap <= 0x00ffffff)
+	    || (   gap >= 0xffffff00
+		&& gap <= 0xffffffff))
+	  {
+	    bfd_put_8 (abfd, gap, data + dst_address);
+	    dst_address += 1;
+	    src_address += 1;
+	  }
+	else
+	  {
+	    if (! ((*link_info->callbacks->reloc_overflow)
+		   (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+		    reloc->howto->name, reloc->addend, input_section->owner,
+		    input_section, reloc->address)))
+	      abort ();
+	  }
+      }
+      break;
+    case R_JMP1:
+      /* A relword which would have like to have been a pcrel */
+    case R_MOVB1:
+      /* A relword which would like to have been modified but
+	     didn't make it */
+    case R_RELWORD:
+      bfd_put_16 (abfd,
+		  bfd_coff_reloc16_get_value (reloc, link_info, input_section),
+		  data + dst_address);
+      dst_address += 2;
+      src_address += 2;
+      break;
+    case R_RELLONG:
+      bfd_put_32 (abfd,
+		  bfd_coff_reloc16_get_value (reloc, link_info, input_section),
+		  data + dst_address);
+      dst_address += 4;
+      src_address += 4;
+      break;
+
+    case R_MOVB2:
+      /* Special relaxed type, there will be a gap between where we
+	     get stuff from and where we put stuff to now
+	
+	     for a mov.b @aa:16 -> mov.b @aa:8
+	     opcode 0x6a 0x0y offset
+	     ->     0x2y off
+	     */
+      if (data[dst_address - 1] != 0x6a)
+	abort ();
+      switch (data[src_address] & 0xf0)
+	{
+	case 0x00:
+	  /* Src is memory */
+	  data[dst_address - 1] = (data[src_address] & 0xf) | 0x20;
+	  break;
+	case 0x80:
+	  /* Src is reg */
+	  data[dst_address - 1] = (data[src_address] & 0xf) | 0x30;
+	  break;
+	default:
+	  abort ();
+	}
+
+      /* the offset must fit ! after all, what was all the relaxing
+	     about ? */
+
+      bfd_put_8 (abfd,
+		 bfd_coff_reloc16_get_value (reloc, link_info, input_section),
+		 data + dst_address);
+
+      /* Note the magic - src goes up by two bytes, but dst by only
+	     one */
+      dst_address += 1;
+      src_address += 3;
+
+      break;
+
+    case R_JMP2:
+      
+      /* Speciial relaxed type */
+      {
+	bfd_vma dot = link_order->offset
+	+ dst_address
+	+ link_order->u.indirect.section->output_section->vma;
+
+	int gap = (bfd_coff_reloc16_get_value (reloc, link_info, input_section)
+		   - dot - 1);
+
+	if ((gap & ~0xff) != 0 && ((gap & 0xff00) != 0xff00))
+	  abort ();
+
+	bfd_put_8 (abfd, gap, data + dst_address);
+
+	switch (data[dst_address - 1])
+	  {
+	  case 0x5e:
+	    /* jsr -> bsr */
+	    bfd_put_8 (abfd, 0x55, data + dst_address - 1);
+	    break;
+	  case 0x5a:
+	    /* jmp ->bra */
+	    bfd_put_8 (abfd, 0x40, data + dst_address - 1);
+	    break;
+
+	  default:
+	    abort ();
+	  }
+	dst_address++;
+	src_address += 3;
+
+	break;
+      }
+      break;
+      
+    case R_JMPL_B8: /* 24 bit branch which is now 8 bits */
+      
+      /* Speciial relaxed type */
+      {
+	bfd_vma dot = link_order->offset
+	+ dst_address
+	+ link_order->u.indirect.section->output_section->vma;
+
+	int gap = (bfd_coff_reloc16_get_value (reloc, link_info, input_section)
+		   - dot - 2);
+
+	if ((gap & ~0xff) != 0 && ((gap & 0xff00) != 0xff00))
+	  abort ();
+
+	switch (data[src_address])
+	  {
+	  case 0x5e:
+	    /* jsr -> bsr */
+	    bfd_put_8 (abfd, 0x55, data + dst_address);
+	    break;
+	  case 0x5a:
+	    /* jmp ->bra */
+	    bfd_put_8 (abfd, 0x40, data + dst_address);
+	    break;
+
+	  default:
+	    bfd_put_8 (abfd, 0xde, data + dst_address);
+	    break;
+	  }
+
+	bfd_put_8 (abfd, gap, data + dst_address + 1);
+	dst_address += 2;
+	src_address += 4;
+
+	break;
+      }
+
+    case R_JMPL1:
+      {
+	int v = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+	int o = bfd_get_32 (abfd, data + src_address);
+	v = (v & 0x00ffffff) | (o & 0xff000000);
+	bfd_put_32 (abfd, v, data + dst_address);
+	dst_address += 4;
+	src_address += 4;
+      }
+
+      break;
+
+
+      /* A 24 bit mov  which could be an 8 bit move, really pointing to
+	 the byte before the 24bit hole, so we can treat it as a 32bit pointer */
+    case R_MOVLB1:
+      {
+	int v = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+	int o = bfd_get_32 (abfd, data + dst_address);
+	v = (v & 0x00ffffff) | (o & 0xff000000);
+	bfd_put_32 (abfd, v, data + dst_address);
+	dst_address += 4;
+	src_address += 4;
+      }
+
+      break;
+    default:
+
+      abort ();
+      break;
+
+    }
+  *src_ptr = src_address;
+  *dst_ptr = dst_address;
+
+}
+
+#define coff_reloc16_extra_cases h8300_reloc16_extra_cases
+#define coff_reloc16_estimate h8300_reloc16_estimate
+
+#define COFF_LONG_FILENAMES
+#include "coffcode.h"
+
+
+#undef coff_bfd_get_relocated_section_contents
+#undef coff_bfd_relax_section
+#define coff_bfd_get_relocated_section_contents \
+  bfd_coff_reloc16_get_relocated_section_contents
+#define coff_bfd_relax_section bfd_coff_reloc16_relax_section
+
+
+
+const bfd_target h8300coff_vec =
+{
+  "coff-h8300",			/* name */
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_BIG,		/* data byte order is big */
+  BFD_ENDIAN_BIG,		/* header byte order is big */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE ),
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC),	/* section flags */
+  '_',				/* leading char */
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+  bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+  bfd_getb16, bfd_getb_signed_16, bfd_putb16,	/* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+  bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+  bfd_getb16, bfd_getb_signed_16, bfd_putb16,	/* hdrs */
+
+  {_bfd_dummy_target, coff_object_p,	/* bfd_check_format */
+   bfd_generic_archive_p, _bfd_dummy_target},
+  {bfd_false, coff_mkobject, _bfd_generic_mkarchive,	/* bfd_set_format */
+   bfd_false},
+  {bfd_false, coff_write_object_contents,	/* bfd_write_contents */
+   _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
@@ -0,0 +1,355 @@
+/* BFD back-end for Hitachi H8/500 COFF binaries.
+   Copyright 1993, 1994 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+   Written by Steve Chamberlain, <sac@cygnus.com>.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "obstack.h"
+#include "libbfd.h"
+#include "bfdlink.h"
+#include "coff/h8500.h"
+#include "coff/internal.h"
+#include "libcoff.h"
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
+
+static reloc_howto_type r_imm8 =
+HOWTO (R_H8500_IMM8, 0, 1, 8, false, 0,
+       complain_overflow_bitfield, 0, "r_imm8", true, 0x000000ff, 0x000000ff, false);
+
+static reloc_howto_type r_imm16 =
+HOWTO (R_H8500_IMM16, 0, 1, 16, false, 0,
+       complain_overflow_bitfield, 0, "r_imm16", true, 0x0000ffff, 0x0000ffff, false);
+
+static reloc_howto_type r_imm24 =
+HOWTO (R_H8500_IMM24, 0, 1, 24, false, 0,
+       complain_overflow_bitfield, 0, "r_imm24", true, 0x00ffffff, 0x00ffffff, false);
+
+static reloc_howto_type r_imm32 =
+HOWTO (R_H8500_IMM32, 0, 1, 32, false, 0,
+       complain_overflow_bitfield, 0, "r_imm32", true, 0xffffffff, 0xffffffff, false);
+
+
+static reloc_howto_type r_high8 =
+HOWTO (R_H8500_HIGH8, 0, 1, 8, false, 0,
+       complain_overflow_dont, 0, "r_high8", true, 0x000000ff, 0x000000ff, false);
+
+static reloc_howto_type r_low16 =
+HOWTO (R_H8500_LOW16, 0, 1, 16, false, 0,
+       complain_overflow_dont, 0, "r_low16", true, 0x0000ffff, 0x0000ffff, false);
+
+static reloc_howto_type r_pcrel8 =
+HOWTO (R_H8500_PCREL8, 0, 1, 8, true, 0, complain_overflow_signed, 0, "r_pcrel8", true, 0, 0, true);
+
+
+static reloc_howto_type r_pcrel16 =
+HOWTO (R_H8500_PCREL16, 0, 1, 16, true, 0, complain_overflow_signed, 0, "r_pcrel16", true, 0, 0, true);
+
+static reloc_howto_type r_high16 =
+HOWTO (R_H8500_HIGH16, 0, 1, 8, false, 0,
+       complain_overflow_dont, 0, "r_high16", true, 0x000ffff, 0x0000ffff, false);
+
+
+/* Turn a howto into a reloc number */
+
+static int 
+coff_h8500_select_reloc (howto)
+     reloc_howto_type *howto;
+{
+  return howto->type;
+}
+
+#define SELECT_RELOC(x,howto) x.r_type = coff_h8500_select_reloc(howto)
+
+
+#define BADMAG(x) H8500BADMAG(x)
+#define H8500 1			/* Customize coffcode.h */
+
+#define __A_MAGIC_SET__
+
+/* Code to swap in the reloc */
+#define SWAP_IN_RELOC_OFFSET   bfd_h_get_32
+#define SWAP_OUT_RELOC_OFFSET bfd_h_put_32
+#define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
+  dst->r_stuff[0] = 'S'; \
+  dst->r_stuff[1] = 'C';
+
+/* Code to turn a r_type into a howto ptr, uses the above howto table
+   */
+
+static void
+rtype2howto(internal, dst)
+     arelent * internal;
+     struct internal_reloc *dst;
+{
+  switch (dst->r_type)
+    {
+    default:
+      abort ();
+      break;
+    case R_H8500_IMM8:
+      internal->howto = &r_imm8;
+      break;
+    case R_H8500_IMM16:
+      internal->howto = &r_imm16;
+      break;
+    case R_H8500_IMM24:
+      internal->howto = &r_imm24;
+      break;
+    case R_H8500_IMM32:
+      internal->howto = &r_imm32;
+      break;
+    case R_H8500_PCREL8:
+      internal->howto = &r_pcrel8;
+      break;
+    case R_H8500_PCREL16:
+      internal->howto = &r_pcrel16;
+      break;
+    case R_H8500_HIGH8:
+      internal->howto = &r_high8;
+      break;
+    case R_H8500_HIGH16:
+      internal->howto = &r_high16;
+      break;
+    case R_H8500_LOW16:
+      internal->howto = &r_low16;
+      break;
+    }
+}
+
+#define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
+
+
+/* Perform any necessaru magic to the addend in a reloc entry */
+
+
+#define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
+ cache_ptr->addend =  ext_reloc.r_offset;
+
+
+#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
+ reloc_processing(relent, reloc, symbols, abfd, section)
+
+static void reloc_processing (relent, reloc, symbols, abfd, section)
+     arelent * relent;
+     struct internal_reloc *reloc;
+     asymbol ** symbols;
+     bfd * abfd;
+     asection * section;
+{
+  relent->address = reloc->r_vaddr;
+  rtype2howto (relent, reloc);
+
+  if (reloc->r_symndx > 0)
+    {
+      relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
+    }
+  else
+    {
+      relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
+    }
+
+
+  relent->addend = reloc->r_offset;
+  relent->address -= section->vma;
+}
+
+static void
+extra_case (in_abfd, link_info, link_order, reloc, data, src_ptr, dst_ptr)
+     bfd *in_abfd;
+     struct bfd_link_info *link_info;
+     struct bfd_link_order *link_order;
+     arelent *reloc;
+     bfd_byte *data;
+     unsigned int *src_ptr;
+     unsigned int *dst_ptr;
+{
+  bfd_byte *d = data+*dst_ptr;
+  asection *input_section = link_order->u.indirect.section;
+  switch (reloc->howto->type)
+    {
+    case R_H8500_IMM8:
+      bfd_put_8 (in_abfd,
+		 bfd_coff_reloc16_get_value (reloc, link_info, input_section),
+		 d);
+      (*dst_ptr) += 1;
+      (*src_ptr) += 1;
+      break;
+
+    case R_H8500_HIGH8:
+      bfd_put_8 (in_abfd,
+		 (bfd_coff_reloc16_get_value (reloc, link_info, input_section)
+		  >> 16),
+		 d );
+      (*dst_ptr) += 1;
+      (*src_ptr) += 1;
+      break;
+
+    case R_H8500_IMM16:
+      bfd_put_16 (in_abfd,
+		  bfd_coff_reloc16_get_value (reloc, link_info, input_section),
+		  d  );
+      (*dst_ptr) += 2;
+      (*src_ptr) += 2;
+      break;
+
+    case R_H8500_LOW16:
+      bfd_put_16 (in_abfd,
+		  bfd_coff_reloc16_get_value (reloc, link_info, input_section),
+		  d);
+
+      (*dst_ptr) += 2;
+      (*src_ptr) += 2;
+      break;
+      
+    case R_H8500_HIGH16:
+      bfd_put_16 (in_abfd,
+		  (bfd_coff_reloc16_get_value (reloc, link_info, input_section)
+		   >>16),
+		  d);
+
+      (*dst_ptr) += 2;
+      (*src_ptr) += 2;
+      break;
+
+    case R_H8500_IMM24:
+      {
+	int v = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+	int o = bfd_get_32(in_abfd, data+ *dst_ptr -1);
+	v = (v & 0x00ffffff) | (o & 0xff00000);
+	bfd_put_32 (in_abfd, v, data  + *dst_ptr -1);
+	(*dst_ptr) +=3;
+	(*src_ptr)+=3;;
+      }
+      break;
+    case R_H8500_IMM32:
+      {
+	int v = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+	bfd_put_32 (in_abfd, v, data  + *dst_ptr);
+	(*dst_ptr) +=4;
+	(*src_ptr)+=4;;
+      }
+      break;
+
+
+    case R_H8500_PCREL8:
+      {
+	bfd_vma dst = bfd_coff_reloc16_get_value (reloc, link_info,
+						  input_section);
+	bfd_vma dot = link_order->offset
+	  + *dst_ptr
+	    + link_order->u.indirect.section->output_section->vma;
+	int gap = dst - dot - 1; /* -1 since were in the odd byte of the
+				    word and the pc's been incremented */
+
+	if (gap > 128 || gap < -128)
+	  {
+	    if (! ((*link_info->callbacks->reloc_overflow)
+		   (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+		    reloc->howto->name, reloc->addend, input_section->owner,
+		    input_section, reloc->address)))
+	      abort ();
+	  }
+	bfd_put_8 (in_abfd, gap, data + *dst_ptr);
+	(*dst_ptr)++;
+	(*src_ptr)++;
+	break;
+      }
+    case R_H8500_PCREL16:
+      {
+	bfd_vma dst = bfd_coff_reloc16_get_value (reloc, link_info,
+						  input_section);
+	bfd_vma dot = link_order->offset
+	  + *dst_ptr
+	    + link_order->u.indirect.section->output_section->vma;
+	int gap = dst - dot - 1; /* -1 since were in the odd byte of the
+				    word and the pc's been incremented */
+
+	if (gap > 32767 || gap < -32768)
+	  {
+	    if (! ((*link_info->callbacks->reloc_overflow)
+		   (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+		    reloc->howto->name, reloc->addend, input_section->owner,
+		    input_section, reloc->address)))
+	      abort ();
+	  }
+	bfd_put_16 (in_abfd, gap, data + *dst_ptr);
+	(*dst_ptr)+=2;
+	(*src_ptr)+=2;
+	break;
+      }
+
+    default:
+      abort ();
+    }
+}
+
+#define coff_reloc16_extra_cases extra_case
+
+#include "coffcode.h"
+
+
+#undef  coff_bfd_get_relocated_section_contents
+#undef coff_bfd_relax_section
+#define coff_bfd_get_relocated_section_contents \
+  bfd_coff_reloc16_get_relocated_section_contents
+#define coff_bfd_relax_section bfd_coff_reloc16_relax_section
+
+const bfd_target h8500coff_vec =
+{
+  "coff-h8500",			/* name */
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_BIG,		/* data byte order is big */
+  BFD_ENDIAN_BIG,		/* header byte order is big */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC),	/* section flags */
+  '_',				/* leading symbol underscore */
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16,	/* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16,	/* hdrs */
+
+  {_bfd_dummy_target, coff_object_p,	/* bfd_check_format */
+   bfd_generic_archive_p, _bfd_dummy_target},
+  {bfd_false, coff_mkobject, _bfd_generic_mkarchive,	/* bfd_set_format */
+   bfd_false},
+  {bfd_false, coff_write_object_contents,	/* bfd_write_contents */
+   _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
@@ -0,0 +1,493 @@
+/* BFD back-end for Intel 386 COFF files.
+   Copyright 1990, 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+
+#include "coff/i386.h"
+
+#include "coff/internal.h"
+
+#ifdef COFF_WITH_PE
+#include "coff/pe.h"
+#endif
+
+#include "libcoff.h"
+
+static bfd_reloc_status_type coff_i386_reloc 
+  PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+static reloc_howto_type *coff_i386_rtype_to_howto
+  PARAMS ((bfd *, asection *, struct internal_reloc *,
+	   struct coff_link_hash_entry *, struct internal_syment *,
+
+	   bfd_vma *));
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (2)
+/* The page size is a guess based on ELF.  */
+
+#define COFF_PAGE_SIZE 0x1000
+
+/* For some reason when using i386 COFF the value stored in the .text
+   section for a reference to a common symbol is the value itself plus
+   any desired offset.  Ian Taylor, Cygnus Support.  */
+
+/* If we are producing relocateable output, we need to do some
+   adjustments to the object file that are not done by the
+   bfd_perform_relocation function.  This function is called by every
+   reloc type to make any required adjustments.  */
+
+static bfd_reloc_status_type
+coff_i386_reloc (abfd, reloc_entry, symbol, data, input_section, output_bfd,
+		 error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  symvalue diff;
+
+  if (output_bfd == (bfd *) NULL)
+    return bfd_reloc_continue;
+
+
+  if (bfd_is_com_section (symbol->section))
+    {
+      /* We are relocating a common symbol.  The current value in the
+	 object file is ORIG + OFFSET, where ORIG is the value of the
+	 common symbol as seen by the object file when it was compiled
+	 (this may be zero if the symbol was undefined) and OFFSET is
+	 the offset into the common symbol (normally zero, but may be
+	 non-zero when referring to a field in a common structure).
+	 ORIG is the negative of reloc_entry->addend, which is set by
+	 the CALC_ADDEND macro below.  We want to replace the value in
+	 the object file with NEW + OFFSET, where NEW is the value of
+	 the common symbol which we are going to put in the final
+	 object file.  NEW is symbol->value.  */
+      diff = symbol->value + reloc_entry->addend;
+    }
+  else
+    {
+      /* For some reason bfd_perform_relocation always effectively
+	 ignores the addend for a COFF target when producing
+	 relocateable output.  This seems to be always wrong for 386
+	 COFF, so we handle the addend here instead.  */
+      diff = reloc_entry->addend;
+    }
+
+
+#ifdef COFF_WITH_PE
+  if (reloc_entry->howto->type == 7)
+    {
+/*      diff -= coff_data(output_bfd)->link_info->pe_info.image_base.value;*/
+      exit(1);
+    }
+#endif
+
+#define DOIT(x) \
+  x = ((x & ~howto->dst_mask) | (((x & howto->src_mask) + diff) & howto->dst_mask))
+
+    if (diff != 0)
+      {
+	reloc_howto_type *howto = reloc_entry->howto;
+	unsigned char *addr = (unsigned char *) data + reloc_entry->address;
+
+	switch (howto->size)
+	  {
+	  case 0:
+	    {
+	      char x = bfd_get_8 (abfd, addr);
+	      DOIT (x);
+	      bfd_put_8 (abfd, x, addr);
+	    }
+	    break;
+
+	  case 1:
+	    {
+	      short x = bfd_get_16 (abfd, addr);
+	      DOIT (x);
+	      bfd_put_16 (abfd, x, addr);
+	    }
+	    break;
+
+	  case 2:
+	    {
+	      long x = bfd_get_32 (abfd, addr);
+	      DOIT (x);
+	      bfd_put_32 (abfd, x, addr);
+	    }
+	    break;
+
+	  default:
+	    abort ();
+	  }
+      }
+
+  /* Now let bfd_perform_relocation finish everything up.  */
+  return bfd_reloc_continue;
+}
+
+#ifdef COFF_WITH_PE
+/* Return true if this relocation should
+   appear in the output .reloc section. */
+
+static boolean in_reloc_p(abfd, howto)
+     bfd * abfd;
+     reloc_howto_type *howto;
+{
+  return ! howto->pc_relative && howto->type != R_IMAGEBASE;
+}     
+#endif
+
+#ifndef PCRELOFFSET
+#define PCRELOFFSET false
+#endif
+
+static reloc_howto_type howto_table[] = 
+{
+  {0},
+  {1},
+  {2},
+  {3},
+  {4},
+  {5},
+  HOWTO (R_DIR32,               /* type */                                 
+	 0,	                /* rightshift */                           
+	 2,	                /* size (0 = byte, 1 = short, 2 = long) */ 
+	 32,	                /* bitsize */                   
+	 false,	                /* pc_relative */                          
+	 0,	                /* bitpos */                               
+	 complain_overflow_bitfield, /* complain_on_overflow */
+	 coff_i386_reloc,       /* special_function */                     
+	 "dir32",               /* name */                                 
+	 true,	                /* partial_inplace */                      
+	 0xffffffff,            /* src_mask */                             
+	 0xffffffff,            /* dst_mask */                             
+	 true),                /* pcrel_offset */
+  /* {7}, */
+  HOWTO (R_IMAGEBASE,            /* type */                                 
+	 0,	                /* rightshift */                           
+	 2,	                /* size (0 = byte, 1 = short, 2 = long) */ 
+	 32,	                /* bitsize */                   
+	 false,	                /* pc_relative */                          
+	 0,	                /* bitpos */                               
+	 complain_overflow_bitfield, /* complain_on_overflow */
+	 coff_i386_reloc,       /* special_function */                     
+	 "rva32",	           /* name */                                 
+	 true,	                /* partial_inplace */                      
+	 0xffffffff,            /* src_mask */                             
+	 0xffffffff,            /* dst_mask */                             
+	 false),                /* pcrel_offset */
+  {010},
+  {011},
+  {012},
+  {013},
+  {014},
+  {015},
+  {016},
+  HOWTO (R_RELBYTE,		/* type */                                 
+	 0,			/* rightshift */                           
+	 0,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 8,			/* bitsize */                   
+	 false,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_bitfield, /* complain_on_overflow */
+	 coff_i386_reloc,	/* special_function */                     
+	 "8",			/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0x000000ff,		/* src_mask */                             
+	 0x000000ff,		/* dst_mask */                             
+	 PCRELOFFSET),		/* pcrel_offset */
+  HOWTO (R_RELWORD,		/* type */                                 
+	 0,			/* rightshift */                           
+	 1,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 16,			/* bitsize */                   
+	 false,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_bitfield, /* complain_on_overflow */
+	 coff_i386_reloc,	/* special_function */                     
+	 "16",			/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0x0000ffff,		/* src_mask */                             
+	 0x0000ffff,		/* dst_mask */                             
+	 PCRELOFFSET),		/* pcrel_offset */
+  HOWTO (R_RELLONG,		/* type */                                 
+	 0,			/* rightshift */                           
+	 2,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 32,			/* bitsize */                   
+	 false,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_bitfield, /* complain_on_overflow */
+	 coff_i386_reloc,	/* special_function */                     
+	 "32",			/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0xffffffff,		/* src_mask */                             
+	 0xffffffff,		/* dst_mask */                             
+	 PCRELOFFSET),		/* pcrel_offset */
+  HOWTO (R_PCRBYTE,		/* type */                                 
+	 0,			/* rightshift */                           
+	 0,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 8,			/* bitsize */                   
+	 true,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_signed, /* complain_on_overflow */
+	 coff_i386_reloc,	/* special_function */                     
+	 "DISP8",		/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0x000000ff,		/* src_mask */                             
+	 0x000000ff,		/* dst_mask */                             
+	 PCRELOFFSET),		/* pcrel_offset */
+  HOWTO (R_PCRWORD,		/* type */                                 
+	 0,			/* rightshift */                           
+	 1,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 16,			/* bitsize */                   
+	 true,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_signed, /* complain_on_overflow */
+	 coff_i386_reloc,	/* special_function */                     
+	 "DISP16",		/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0x0000ffff,		/* src_mask */                             
+	 0x0000ffff,		/* dst_mask */                             
+	 PCRELOFFSET),		/* pcrel_offset */
+  HOWTO (R_PCRLONG,		/* type */                                 
+	 0,			/* rightshift */                           
+	 2,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 32,			/* bitsize */                   
+	 true,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_signed, /* complain_on_overflow */
+	 coff_i386_reloc,	/* special_function */                     
+	 "DISP32",		/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0xffffffff,		/* src_mask */                             
+	 0xffffffff,		/* dst_mask */                             
+	 PCRELOFFSET)		/* pcrel_offset */
+};
+
+/* Turn a howto into a reloc  nunmber */
+
+#define SELECT_RELOC(x,howto) { x.r_type = howto->type; }
+#define BADMAG(x) I386BADMAG(x)
+#define I386 1			/* Customize coffcode.h */
+
+#define RTYPE2HOWTO(cache_ptr, dst) \
+	    (cache_ptr)->howto = howto_table + (dst)->r_type;
+
+/* For 386 COFF a STYP_NOLOAD | STYP_BSS section is part of a shared
+   library.  On some other COFF targets STYP_BSS is normally
+   STYP_NOLOAD.  */
+#define BSS_NOLOAD_IS_SHARED_LIBRARY
+
+/* Compute the addend of a reloc.  If the reloc is to a common symbol,
+   the object file contains the value of the common symbol.  By the
+   time this is called, the linker may be using a different symbol
+   from a different object file with a different value.  Therefore, we
+   hack wildly to locate the original symbol from this file so that we
+   can make the correct adjustment.  This macro sets coffsym to the
+   symbol from the original file, and uses it to set the addend value
+   correctly.  If this is not a common symbol, the usual addend
+   calculation is done, except that an additional tweak is needed for
+   PC relative relocs.
+   FIXME: This macro refers to symbols and asect; these are from the
+   calling function, not the macro arguments.  */
+
+#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr)		\
+  {								\
+    coff_symbol_type *coffsym = (coff_symbol_type *) NULL;	\
+    if (ptr && bfd_asymbol_bfd (ptr) != abfd)			\
+      coffsym = (obj_symbols (abfd)				\
+	         + (cache_ptr->sym_ptr_ptr - symbols));		\
+    else if (ptr)						\
+      coffsym = coff_symbol_from (abfd, ptr);			\
+    if (coffsym != (coff_symbol_type *) NULL			\
+	&& coffsym->native->u.syment.n_scnum == 0)		\
+      cache_ptr->addend = - coffsym->native->u.syment.n_value;	\
+    else if (ptr && bfd_asymbol_bfd (ptr) == abfd		\
+	     && ptr->section != (asection *) NULL)		\
+      cache_ptr->addend = - (ptr->section->vma + ptr->value);	\
+    else							\
+      cache_ptr->addend = 0;					\
+    if (ptr && howto_table[reloc.r_type].pc_relative)		\
+      cache_ptr->addend += asect->vma;				\
+  }
+
+/* We use the special COFF backend linker.  */
+#define coff_relocate_section _bfd_coff_generic_relocate_section
+
+static reloc_howto_type *
+coff_i386_rtype_to_howto (abfd, sec, rel, h, sym, addendp)
+     bfd *abfd;
+     asection *sec;
+     struct internal_reloc *rel;
+     struct coff_link_hash_entry *h;
+     struct internal_syment *sym;
+     bfd_vma *addendp;
+{
+
+  reloc_howto_type *howto;
+
+  howto = howto_table + rel->r_type;
+
+#ifdef COFF_WITH_PE
+  *addendp = 0;
+#endif
+
+  if (howto->pc_relative)
+    *addendp += sec->vma;
+
+  if (sym != NULL && sym->n_scnum == 0 && sym->n_value != 0)
+    {
+      /* This is a common symbol.  The section contents include the
+	 size (sym->n_value) as an addend.  The relocate_section
+	 function will be adding in the final value of the symbol.  We
+	 need to subtract out the current size in order to get the
+	 correct result.  */
+ 
+      BFD_ASSERT (h != NULL);
+
+
+#ifndef COFF_WITH_PE
+      /* I think we *do* want to bypass this.  If we don't, I have seen some data
+	 parameters get the wrong relcation address.  If I link two versions
+	 with and without this section bypassed and then do a binary comparison,
+	 the addresses which are different can be looked up in the map.  The 
+	 case in which this section has been bypassed has addresses which correspond
+	 to values I can find in the map */
+      *addendp -= sym->n_value;
+#endif
+    }
+
+  /* If the output symbol is common (in which case this must be a
+     relocateable link), we need to add in the final size of the
+     common symbol.  */
+  if (h != NULL && h->root.type == bfd_link_hash_common) 
+    *addendp += h->root.u.c.size;
+
+
+#ifdef COFF_WITH_PE
+  if (howto->pc_relative)
+    *addendp -= 4;
+
+  if (rel->r_type == R_IMAGEBASE)
+    {
+      *addendp -= pe_data(sec->output_section->owner)->pe_opthdr.ImageBase;
+    }
+#endif
+
+  return howto;
+}
+
+
+#define coff_bfd_reloc_type_lookup coff_i386_reloc_type_lookup
+
+
+static reloc_howto_type *
+coff_i386_reloc_type_lookup (abfd, code)
+     bfd *abfd;
+     bfd_reloc_code_real_type code;
+{
+  switch (code)
+    {
+    case BFD_RELOC_RVA:
+      return howto_table +R_IMAGEBASE;
+    case BFD_RELOC_32:
+      return howto_table + R_DIR32;
+    case BFD_RELOC_32_PCREL:
+      return howto_table + R_PCRLONG;
+    default:
+      BFD_FAIL ();
+      return 0;
+    }
+}
+
+
+
+#define coff_rtype_to_howto coff_i386_rtype_to_howto
+
+#include "coffcode.h"
+
+static const bfd_target *
+i3coff_object_p(a)
+     bfd *a;
+{
+  return coff_object_p(a);
+}
+
+const bfd_target
+#ifdef TARGET_SYM
+  TARGET_SYM =
+#else
+  i386coff_vec =
+#endif
+{
+#ifdef TARGET_NAME
+  TARGET_NAME,
+#else
+  "coff-i386",			/* name */
+#endif
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_LITTLE,		/* data byte order is little */
+  BFD_ENDIAN_LITTLE,		/* header byte order is little */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+#ifdef TARGET_UNDERSCORE
+  TARGET_UNDERSCORE,		/* leading underscore */
+#else
+  0,				/* leading underscore */
+#endif
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
+
+/* Note that we allow an object file to be treated as a core file as well. */
+    {_bfd_dummy_target, i3coff_object_p, /* bfd_check_format */
+       bfd_generic_archive_p, i3coff_object_p},
+    {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
+       bfd_false},
+    {bfd_false, coff_write_object_contents, /* bfd_write_contents */
+       _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
@@ -0,0 +1,423 @@
+/* BFD back-end for Intel 860 COFF files.
+   Copyright 1990, 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+   Created mostly by substituting "860" for "386" in coff-i386.c
+   Harry Dolan <dolan@ssd.intel.com>, October 1995
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+
+#include "coff/i860.h"
+
+#include "coff/internal.h"
+
+#include "libcoff.h"
+
+static bfd_reloc_status_type coff_i860_reloc 
+  PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+static reloc_howto_type *coff_i860_rtype_to_howto
+  PARAMS ((bfd *, asection *, struct internal_reloc *,
+	   struct coff_link_hash_entry *, struct internal_syment *,
+	   bfd_vma *));
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (2)
+/* The page size is a guess based on ELF.  */
+
+#define COFF_PAGE_SIZE 0x1000
+
+/* For some reason when using i860 COFF the value stored in the .text
+   section for a reference to a common symbol is the value itself plus
+   any desired offset.  Ian Taylor, Cygnus Support.  */
+
+/* If we are producing relocateable output, we need to do some
+   adjustments to the object file that are not done by the
+   bfd_perform_relocation function.  This function is called by every
+   reloc type to make any required adjustments.  */
+
+static bfd_reloc_status_type
+coff_i860_reloc (abfd, reloc_entry, symbol, data, input_section, output_bfd,
+		 error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  symvalue diff;
+
+  if (output_bfd == (bfd *) NULL)
+    return bfd_reloc_continue;
+
+
+  if (bfd_is_com_section (symbol->section))
+    {
+      /* We are relocating a common symbol.  The current value in the
+	 object file is ORIG + OFFSET, where ORIG is the value of the
+	 common symbol as seen by the object file when it was compiled
+	 (this may be zero if the symbol was undefined) and OFFSET is
+	 the offset into the common symbol (normally zero, but may be
+	 non-zero when referring to a field in a common structure).
+	 ORIG is the negative of reloc_entry->addend, which is set by
+	 the CALC_ADDEND macro below.  We want to replace the value in
+	 the object file with NEW + OFFSET, where NEW is the value of
+	 the common symbol which we are going to put in the final
+	 object file.  NEW is symbol->value.  */
+      diff = symbol->value + reloc_entry->addend;
+    }
+  else
+    {
+      /* For some reason bfd_perform_relocation always effectively
+	 ignores the addend for a COFF target when producing
+	 relocateable output.  This seems to be always wrong for 860
+	 COFF, so we handle the addend here instead.  */
+      diff = reloc_entry->addend;
+    }
+
+
+#define DOIT(x) \
+  x = ((x & ~howto->dst_mask) | (((x & howto->src_mask) + diff) & howto->dst_mask))
+
+    if (diff != 0)
+      {
+	reloc_howto_type *howto = reloc_entry->howto;
+	unsigned char *addr = (unsigned char *) data + reloc_entry->address;
+
+	switch (howto->size)
+	  {
+	  case 0:
+	    {
+	      char x = bfd_get_8 (abfd, addr);
+	      DOIT (x);
+	      bfd_put_8 (abfd, x, addr);
+	    }
+	    break;
+
+	  case 1:
+	    {
+	      short x = bfd_get_16 (abfd, addr);
+	      DOIT (x);
+	      bfd_put_16 (abfd, x, addr);
+	    }
+	    break;
+
+	  case 2:
+	    {
+	      long x = bfd_get_32 (abfd, addr);
+	      DOIT (x);
+	      bfd_put_32 (abfd, x, addr);
+	    }
+	    break;
+
+	  default:
+	    abort ();
+	  }
+      }
+
+  /* Now let bfd_perform_relocation finish everything up.  */
+  return bfd_reloc_continue;
+}
+
+#ifndef PCRELOFFSET
+#define PCRELOFFSET false
+#endif
+
+static reloc_howto_type howto_table[] = 
+{
+  {0},
+  {1},
+  {2},
+  {3},
+  {4},
+  {5},
+  HOWTO (R_DIR32,               /* type */                                 
+	 0,	                /* rightshift */                           
+	 2,	                /* size (0 = byte, 1 = short, 2 = long) */ 
+	 32,	                /* bitsize */                   
+	 false,	                /* pc_relative */                          
+	 0,	                /* bitpos */                               
+	 complain_overflow_bitfield, /* complain_on_overflow */
+	 coff_i860_reloc,       /* special_function */                     
+	 "dir32",               /* name */                                 
+	 true,	                /* partial_inplace */                      
+	 0xffffffff,            /* src_mask */                             
+	 0xffffffff,            /* dst_mask */                             
+	 true),                /* pcrel_offset */
+  /* {7}, */
+  HOWTO (R_IMAGEBASE,            /* type */                                 
+	 0,	                /* rightshift */                           
+	 2,	                /* size (0 = byte, 1 = short, 2 = long) */ 
+	 32,	                /* bitsize */                   
+	 false,	                /* pc_relative */                          
+	 0,	                /* bitpos */                               
+	 complain_overflow_bitfield, /* complain_on_overflow */
+	 coff_i860_reloc,       /* special_function */                     
+	 "rva32",	           /* name */                                 
+	 true,	                /* partial_inplace */                      
+	 0xffffffff,            /* src_mask */                             
+	 0xffffffff,            /* dst_mask */                             
+	 false),                /* pcrel_offset */
+  {010},
+  {011},
+  {012},
+  {013},
+  {014},
+  {015},
+  {016},
+  HOWTO (R_RELBYTE,		/* type */                                 
+	 0,			/* rightshift */                           
+	 0,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 8,			/* bitsize */                   
+	 false,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_bitfield, /* complain_on_overflow */
+	 coff_i860_reloc,	/* special_function */                     
+	 "8",			/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0x000000ff,		/* src_mask */                             
+	 0x000000ff,		/* dst_mask */                             
+	 PCRELOFFSET),		/* pcrel_offset */
+  HOWTO (R_RELWORD,		/* type */                                 
+	 0,			/* rightshift */                           
+	 1,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 16,			/* bitsize */                   
+	 false,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_bitfield, /* complain_on_overflow */
+	 coff_i860_reloc,	/* special_function */                     
+	 "16",			/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0x0000ffff,		/* src_mask */                             
+	 0x0000ffff,		/* dst_mask */                             
+	 PCRELOFFSET),		/* pcrel_offset */
+  HOWTO (R_RELLONG,		/* type */                                 
+	 0,			/* rightshift */                           
+	 2,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 32,			/* bitsize */                   
+	 false,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_bitfield, /* complain_on_overflow */
+	 coff_i860_reloc,	/* special_function */                     
+	 "32",			/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0xffffffff,		/* src_mask */                             
+	 0xffffffff,		/* dst_mask */                             
+	 PCRELOFFSET),		/* pcrel_offset */
+  HOWTO (R_PCRBYTE,		/* type */                                 
+	 0,			/* rightshift */                           
+	 0,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 8,			/* bitsize */                   
+	 true,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_signed, /* complain_on_overflow */
+	 coff_i860_reloc,	/* special_function */                     
+	 "DISP8",		/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0x000000ff,		/* src_mask */                             
+	 0x000000ff,		/* dst_mask */                             
+	 PCRELOFFSET),		/* pcrel_offset */
+  HOWTO (R_PCRWORD,		/* type */                                 
+	 0,			/* rightshift */                           
+	 1,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 16,			/* bitsize */                   
+	 true,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_signed, /* complain_on_overflow */
+	 coff_i860_reloc,	/* special_function */                     
+	 "DISP16",		/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0x0000ffff,		/* src_mask */                             
+	 0x0000ffff,		/* dst_mask */                             
+	 PCRELOFFSET),		/* pcrel_offset */
+  HOWTO (R_PCRLONG,		/* type */                                 
+	 0,			/* rightshift */                           
+	 2,			/* size (0 = byte, 1 = short, 2 = long) */ 
+	 32,			/* bitsize */                   
+	 true,			/* pc_relative */                          
+	 0,			/* bitpos */                               
+	 complain_overflow_signed, /* complain_on_overflow */
+	 coff_i860_reloc,	/* special_function */                     
+	 "DISP32",		/* name */                                 
+	 true,			/* partial_inplace */                      
+	 0xffffffff,		/* src_mask */                             
+	 0xffffffff,		/* dst_mask */                             
+	 PCRELOFFSET)		/* pcrel_offset */
+};
+
+/* Turn a howto into a reloc  nunmber */
+
+#define SELECT_RELOC(x,howto) { x.r_type = howto->type; }
+#define BADMAG(x) I860BADMAG(x)
+#define I860 1			/* Customize coffcode.h */
+
+#define RTYPE2HOWTO(cache_ptr, dst) \
+	    (cache_ptr)->howto = howto_table + (dst)->r_type;
+
+/* For 860 COFF a STYP_NOLOAD | STYP_BSS section is part of a shared
+   library.  On some other COFF targets STYP_BSS is normally
+   STYP_NOLOAD.  */
+#define BSS_NOLOAD_IS_SHARED_LIBRARY
+
+/* Compute the addend of a reloc.  If the reloc is to a common symbol,
+   the object file contains the value of the common symbol.  By the
+   time this is called, the linker may be using a different symbol
+   from a different object file with a different value.  Therefore, we
+   hack wildly to locate the original symbol from this file so that we
+   can make the correct adjustment.  This macro sets coffsym to the
+   symbol from the original file, and uses it to set the addend value
+   correctly.  If this is not a common symbol, the usual addend
+   calculation is done, except that an additional tweak is needed for
+   PC relative relocs.
+   FIXME: This macro refers to symbols and asect; these are from the
+   calling function, not the macro arguments.  */
+
+#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr)		\
+  {								\
+    coff_symbol_type *coffsym = (coff_symbol_type *) NULL;	\
+    if (ptr && bfd_asymbol_bfd (ptr) != abfd)			\
+      coffsym = (obj_symbols (abfd)				\
+	         + (cache_ptr->sym_ptr_ptr - symbols));		\
+    else if (ptr)						\
+      coffsym = coff_symbol_from (abfd, ptr);			\
+    if (coffsym != (coff_symbol_type *) NULL			\
+	&& coffsym->native->u.syment.n_scnum == 0)		\
+      cache_ptr->addend = - coffsym->native->u.syment.n_value;	\
+    else if (ptr && bfd_asymbol_bfd (ptr) == abfd		\
+	     && ptr->section != (asection *) NULL)		\
+      cache_ptr->addend = - (ptr->section->vma + ptr->value);	\
+    else							\
+      cache_ptr->addend = 0;					\
+    if (ptr && howto_table[reloc.r_type].pc_relative)		\
+      cache_ptr->addend += asect->vma;				\
+  }
+
+/* We use the special COFF backend linker.  */
+#define coff_relocate_section _bfd_coff_generic_relocate_section
+
+static reloc_howto_type *
+coff_i860_rtype_to_howto (abfd, sec, rel, h, sym, addendp)
+     bfd *abfd;
+     asection *sec;
+     struct internal_reloc *rel;
+     struct coff_link_hash_entry *h;
+     struct internal_syment *sym;
+     bfd_vma *addendp;
+{
+
+  reloc_howto_type *howto;
+
+  howto = howto_table + rel->r_type;
+
+  if (howto->pc_relative)
+    *addendp += sec->vma;
+
+  if (sym != NULL && sym->n_scnum == 0 && sym->n_value != 0)
+    {
+      /* This is a common symbol.  The section contents include the
+	 size (sym->n_value) as an addend.  The relocate_section
+	 function will be adding in the final value of the symbol.  We
+	 need to subtract out the current size in order to get the
+	 correct result.  */
+ 
+      BFD_ASSERT (h != NULL);
+
+
+      /* I think we *do* want to bypass this.  If we don't, I have seen some data
+	 parameters get the wrong relcation address.  If I link two versions
+	 with and without this section bypassed and then do a binary comparison,
+	 the addresses which are different can be looked up in the map.  The 
+	 case in which this section has been bypassed has addresses which correspond
+	 to values I can find in the map */
+      *addendp -= sym->n_value;
+    }
+
+  /* If the output symbol is common (in which case this must be a
+     relocateable link), we need to add in the final size of the
+     common symbol.  */
+  if (h != NULL && h->root.type == bfd_link_hash_common) 
+    *addendp += h->root.u.c.size;
+
+  return howto;
+}
+
+#define coff_rtype_to_howto coff_i860_rtype_to_howto
+
+#include "coffcode.h"
+
+static const bfd_target *
+i3coff_object_p(a)
+     bfd *a;
+{
+  return coff_object_p(a);
+}
+
+const bfd_target
+#ifdef TARGET_SYM
+  TARGET_SYM =
+#else
+  i860coff_vec =
+#endif
+{
+#ifdef TARGET_NAME
+  TARGET_NAME,
+#else
+  "coff-i860",			/* name */
+#endif
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_LITTLE,		/* data byte order is little */
+  BFD_ENDIAN_LITTLE,		/* header byte order is little */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+  '_',				/* leading underscore */
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
+
+/* Note that we allow an object file to be treated as a core file as well. */
+    {_bfd_dummy_target, i3coff_object_p, /* bfd_check_format */
+       bfd_generic_archive_p, i3coff_object_p},
+    {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
+       bfd_false},
+    {bfd_false, coff_write_object_contents, /* bfd_write_contents */
+       _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
@@ -0,0 +1,683 @@
+/* BFD back-end for Intel 960 COFF files.
+   Copyright (C) 1990, 91, 92, 93, 94, 1995 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define I960 1
+#define BADMAG(x) I960BADMAG(x)
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+#include "coff/i960.h"
+#include "coff/internal.h"
+#include "libcoff.h"		/* to allow easier abstraction-breaking */
+
+static bfd_reloc_status_type optcall_callback
+  PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+static bfd_reloc_status_type coff_i960_relocate
+  PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+static reloc_howto_type *coff_i960_reloc_type_lookup
+  PARAMS ((bfd *, bfd_reloc_code_real_type));
+static boolean coff_i960_start_final_link
+  PARAMS ((bfd *, struct bfd_link_info *));
+static boolean coff_i960_relocate_section
+  PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *,
+	   struct internal_reloc *, struct internal_syment *, asection **));
+static boolean coff_i960_adjust_symndx
+  PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *,
+	   struct internal_reloc *, boolean *));
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (3)
+
+/* The i960 does not support an MMU, so COFF_PAGE_SIZE can be
+   arbitrarily small.  */
+#define COFF_PAGE_SIZE 1
+
+#define COFF_LONG_FILENAMES
+
+/* This is just like the usual CALC_ADDEND, but it includes the
+   section VMA for PC relative relocs.  */
+#ifndef CALC_ADDEND
+#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr)                \
+  {                                                             \
+    coff_symbol_type *coffsym = (coff_symbol_type *) NULL;      \
+    if (ptr && bfd_asymbol_bfd (ptr) != abfd)                   \
+      coffsym = (obj_symbols (abfd)                             \
+                 + (cache_ptr->sym_ptr_ptr - symbols));         \
+    else if (ptr)                                               \
+      coffsym = coff_symbol_from (abfd, ptr);                   \
+    if (coffsym != (coff_symbol_type *) NULL                    \
+        && coffsym->native->u.syment.n_scnum == 0)              \
+      cache_ptr->addend = 0;                                    \
+    else if (ptr && bfd_asymbol_bfd (ptr) == abfd               \
+             && ptr->section != (asection *) NULL)              \
+      cache_ptr->addend = - (ptr->section->vma + ptr->value);   \
+    else                                                        \
+      cache_ptr->addend = 0;                                    \
+    if (ptr && (reloc.r_type == 25 || reloc.r_type == 27))	\
+      cache_ptr->addend += asect->vma;				\
+  }
+#endif
+
+#define CALLS	 0x66003800	/* Template for 'calls' instruction	*/
+#define BAL	 0x0b000000	/* Template for 'bal' instruction	*/
+#define BAL_MASK 0x00ffffff
+
+static bfd_reloc_status_type 
+optcall_callback (abfd, reloc_entry, symbol_in, data,
+		  input_section, ignore_bfd, error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol_in;
+     PTR data;
+     asection *input_section;
+     bfd *ignore_bfd;
+     char **error_message;
+{
+  /* This item has already been relocated correctly, but we may be
+   * able to patch in yet better code - done by digging out the
+   * correct info on this symbol */
+  bfd_reloc_status_type result;
+  coff_symbol_type *cs = coffsymbol(symbol_in);
+
+  /* Don't do anything with symbols which aren't tied up yet,
+     except move the reloc. */
+  if (bfd_is_und_section (cs->symbol.section)) {
+    reloc_entry->address += input_section->output_offset;
+    return bfd_reloc_ok;
+  }
+    
+  /* So the target symbol has to be of coff type, and the symbol 
+     has to have the correct native information within it */
+  if ((bfd_asymbol_flavour(&cs->symbol) != bfd_target_coff_flavour)
+      || (cs->native == (combined_entry_type *)NULL))
+    {
+      /* This is interesting, consider the case where we're outputting coff
+	 from a mix n match input, linking from coff to a symbol defined in a
+	 bout file will cause this match to be true. Should I complain?  This
+	 will only work if the bout symbol is non leaf.  */
+      *error_message =
+	(char *) "uncertain calling convention for non-COFF symbol";
+      result = bfd_reloc_dangerous;
+    }
+  else
+    {
+    switch (cs->native->u.syment.n_sclass) 
+      {
+      case C_LEAFSTAT:
+      case C_LEAFEXT:
+  	/* This is a call to a leaf procedure, replace instruction with a bal
+	   to the correct location.  */
+	{
+	  union internal_auxent *aux = &((cs->native+2)->u.auxent);
+	  int word = bfd_get_32(abfd, (bfd_byte *)data + reloc_entry->address);
+	  int olf = (aux->x_bal.x_balntry - cs->native->u.syment.n_value);
+	  BFD_ASSERT(cs->native->u.syment.n_numaux==2);
+
+	  /* We replace the original call instruction with a bal to
+	     the bal entry point - the offset of which is described in
+	     the 2nd auxent of the original symbol. We keep the native
+	     sym and auxents untouched, so the delta between the two
+	     is the offset of the bal entry point.  */
+	  word = ((word +  olf)  & BAL_MASK) | BAL;
+  	  bfd_put_32(abfd, word, (bfd_byte *) data + reloc_entry->address);
+  	}
+	result = bfd_reloc_ok;
+	break;
+      case C_SCALL:
+	/* This is a call to a system call, replace with a calls to # */
+	BFD_ASSERT(0);
+	result = bfd_reloc_ok;
+	break;
+      default:
+	result = bfd_reloc_ok;
+	break;
+      }
+  }
+  return result;
+}
+
+/* i960 COFF is used by VxWorks 5.1.  However, VxWorks 5.1 does not
+   appear to correctly handle a reloc against a symbol defined in the
+   same object file.  It appears to simply discard such relocs, rather
+   than adding their values into the object file.  We handle this here
+   by converting all relocs against defined symbols into relocs
+   against the section symbol, when generating a relocateable output
+   file.
+
+   Note that this function is only called if we are not using the COFF
+   specific backend linker.  It only does something when doing a
+   relocateable link, which will almost certainly fail when not
+   generating COFF i960 output, so this function is actually no longer
+   useful.  It was used before this target was converted to use the
+   COFF specific backend linker.  */
+
+static bfd_reloc_status_type 
+coff_i960_relocate (abfd, reloc_entry, symbol, data, input_section,
+		    output_bfd, error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  asection *osec;
+
+  if (output_bfd == NULL)
+    {
+      /* Not generating relocateable output file.  */
+      return bfd_reloc_continue;
+    }
+
+  if (bfd_is_und_section (bfd_get_section (symbol)))
+    {
+      /* Symbol is not defined, so no need to worry about it.  */
+      return bfd_reloc_continue;
+    }
+
+  if (bfd_is_com_section (bfd_get_section (symbol)))
+    {
+      /* I don't really know what the right action is for a common
+         symbol.  */
+      return bfd_reloc_continue;
+    }
+
+  /* Convert the reloc to use the section symbol.  FIXME: This method
+     is ridiculous.  */
+  osec = bfd_get_section (symbol)->output_section;
+  if (coff_section_data (output_bfd, osec) != NULL
+      && coff_section_data (output_bfd, osec)->tdata != NULL)
+    reloc_entry->sym_ptr_ptr =
+      (asymbol **) coff_section_data (output_bfd, osec)->tdata;
+  else
+    {
+      const char *sec_name;
+      asymbol **syms, **sym_end;
+
+      sec_name = bfd_get_section_name (output_bfd, osec);
+      syms = bfd_get_outsymbols (output_bfd);
+      sym_end = syms + bfd_get_symcount (output_bfd);
+      for (; syms < sym_end; syms++)
+	{
+	  if (bfd_asymbol_name (*syms) != NULL
+	      && (*syms)->value == 0
+	      && strcmp ((*syms)->section->output_section->name,
+			 sec_name) == 0)
+	    break;
+	}
+
+      if (syms >= sym_end)
+	abort ();
+
+      reloc_entry->sym_ptr_ptr = syms;
+
+      if (coff_section_data (output_bfd, osec) == NULL)
+	{
+	  osec->used_by_bfd =
+	    ((PTR) bfd_zalloc (abfd,
+			       sizeof (struct coff_section_tdata)));
+	  if (osec->used_by_bfd == NULL)
+	    return bfd_reloc_overflow;
+	}
+      coff_section_data (output_bfd, osec)->tdata = (PTR) syms;
+    }
+
+  /* Let bfd_perform_relocation do its thing, which will include
+     stuffing the symbol addend into the object file.  */
+  return bfd_reloc_continue;
+}
+
+static reloc_howto_type howto_rellong =
+  HOWTO ((unsigned int) R_RELLONG, 0, 2, 32,false, 0,
+	 complain_overflow_bitfield, coff_i960_relocate,"rellong", true,
+	 0xffffffff, 0xffffffff, 0);
+static reloc_howto_type howto_iprmed =
+  HOWTO (R_IPRMED, 0, 2, 24,true,0, complain_overflow_signed,
+	 coff_i960_relocate, "iprmed ", true, 0x00ffffff, 0x00ffffff, 0);
+static reloc_howto_type howto_optcall =
+  HOWTO (R_OPTCALL, 0,2,24,true,0, complain_overflow_signed,
+	 optcall_callback, "optcall", true, 0x00ffffff, 0x00ffffff, 0);
+
+static reloc_howto_type *
+coff_i960_reloc_type_lookup (abfd, code)
+     bfd *abfd;
+     bfd_reloc_code_real_type code;
+{
+  switch (code)
+    {
+    default:
+      return 0;
+    case BFD_RELOC_I960_CALLJ:
+      return &howto_optcall;
+    case BFD_RELOC_32:
+    case BFD_RELOC_CTOR:
+      return &howto_rellong;
+    case BFD_RELOC_24_PCREL:
+      return &howto_iprmed;
+    }
+}
+
+/* The real code is in coffcode.h */
+
+#define RTYPE2HOWTO(cache_ptr, dst) \
+{							\
+   reloc_howto_type *howto_ptr;				\
+   switch ((dst)->r_type) {				\
+     case 17: howto_ptr = &howto_rellong; break;	\
+     case 25: howto_ptr = &howto_iprmed; break;		\
+     case 27: howto_ptr = &howto_optcall; break;	\
+     default: howto_ptr = 0; break;			\
+     }							\
+   (cache_ptr)->howto = howto_ptr;			\
+ }
+
+/* i960 COFF is used by VxWorks 5.1.  However, VxWorks 5.1 does not
+   appear to correctly handle a reloc against a symbol defined in the
+   same object file.  It appears to simply discard such relocs, rather
+   than adding their values into the object file.  We handle this by
+   converting all relocs against global symbols into relocs against
+   internal symbols at the start of the section.  This routine is
+   called at the start of the linking process, and it creates the
+   necessary symbols.  */
+
+static boolean
+coff_i960_start_final_link (abfd, info)
+     bfd *abfd;
+     struct bfd_link_info *info;
+{
+  bfd_size_type symesz = bfd_coff_symesz (abfd);
+  asection *o;
+  bfd_byte *esym;
+
+  if (! info->relocateable)
+    return true;
+
+  esym = (bfd_byte *) bfd_malloc (symesz);
+  if (esym == NULL)
+    return false;
+
+  if (bfd_seek (abfd, obj_sym_filepos (abfd), SEEK_SET) != 0)
+    return false;
+
+  for (o = abfd->sections; o != NULL; o = o->next)
+    {
+      struct internal_syment isym;
+
+      strncpy (isym._n._n_name, o->name, SYMNMLEN);
+      isym.n_value = 0;
+      isym.n_scnum = o->target_index;
+      isym.n_type = T_NULL;
+      isym.n_sclass = C_STAT;
+      isym.n_numaux = 0;
+
+      bfd_coff_swap_sym_out (abfd, (PTR) &isym, (PTR) esym);
+
+      if (bfd_write (esym, symesz, 1, abfd) != symesz)
+	{
+	  free (esym);
+	  return false;
+	}
+
+      obj_raw_syment_count (abfd) += 1;
+    }
+
+  free (esym);
+
+  return true;
+}
+
+/* The reloc processing routine for the optimized COFF linker.  */
+
+static boolean
+coff_i960_relocate_section (output_bfd, info, input_bfd, input_section,
+			    contents, relocs, syms, sections)
+     bfd *output_bfd;
+     struct bfd_link_info *info;
+     bfd *input_bfd;
+     asection *input_section;
+     bfd_byte *contents;
+     struct internal_reloc *relocs;
+     struct internal_syment *syms;
+     asection **sections;
+{
+  struct internal_reloc *rel;
+  struct internal_reloc *relend;
+
+  rel = relocs;
+  relend = rel + input_section->reloc_count;
+  for (; rel < relend; rel++)
+    {
+      long symndx;
+      struct coff_link_hash_entry *h;
+      struct internal_syment *sym;
+      bfd_vma addend;
+      bfd_vma val;
+      reloc_howto_type *howto;
+      bfd_reloc_status_type rstat = bfd_reloc_ok;
+      boolean done;
+
+      symndx = rel->r_symndx;
+
+      if (symndx == -1)
+	{
+	  h = NULL;
+	  sym = NULL;
+	}
+      else
+	{    
+	  h = obj_coff_sym_hashes (input_bfd)[symndx];
+	  sym = syms + symndx;
+	}
+
+      if (sym != NULL && sym->n_scnum != 0)
+	addend = - sym->n_value;
+      else
+	addend = 0;
+
+      switch (rel->r_type)
+	{
+	case 17: howto = &howto_rellong; break;
+	case 25: howto = &howto_iprmed; break;
+	case 27: howto = &howto_optcall; break;
+	default:
+	  bfd_set_error (bfd_error_bad_value);
+	  return false;
+	}
+
+      val = 0;
+
+      if (h == NULL)
+	{
+	  asection *sec;
+
+	  if (symndx == -1)
+	    {
+	      sec = bfd_abs_section_ptr;
+	      val = 0;
+	    }
+	  else
+	    {
+	      sec = sections[symndx];
+              val = (sec->output_section->vma
+		     + sec->output_offset
+		     + sym->n_value
+		     - sec->vma);
+	    }
+	}
+      else
+	{
+	  if (h->root.type == bfd_link_hash_defined
+	      || h->root.type == bfd_link_hash_defweak)
+	    {
+	      asection *sec;
+
+	      sec = h->root.u.def.section;
+	      val = (h->root.u.def.value
+		     + sec->output_section->vma
+		     + sec->output_offset);
+	    }
+	  else if (! info->relocateable)
+	    {
+	      if (! ((*info->callbacks->undefined_symbol)
+		     (info, h->root.root.string, input_bfd, input_section,
+		      rel->r_vaddr - input_section->vma)))
+		return false;
+	    }
+	}
+
+      done = false;
+
+      if (howto->type == R_OPTCALL && ! info->relocateable && symndx != -1)
+	{
+	  int class;
+
+	  if (h != NULL)
+	    class = h->class;
+	  else
+	    class = sym->n_sclass;
+
+	  switch (class)
+	    {
+	    case C_NULL:
+	      /* This symbol is apparently not from a COFF input file.
+                 We warn, and then assume that it is not a leaf
+                 function.  */
+	      if (! ((*info->callbacks->reloc_dangerous)
+		     (info,
+		      "uncertain calling convention for non-COFF symbol",
+		      input_bfd, input_section,
+		      rel->r_vaddr - input_section->vma)))
+		return false;
+	      break;
+	    case C_LEAFSTAT:
+	    case C_LEAFEXT:
+	      /* This is a call to a leaf procedure; use the bal
+                 instruction.  */
+	      {
+		long olf;
+		unsigned long word;
+
+		if (h != NULL)
+		  {
+		    BFD_ASSERT (h->numaux == 2);
+		    olf = h->aux[1].x_bal.x_balntry;
+		  }
+		else
+		  {
+		    bfd_byte *esyms;
+		    union internal_auxent aux;
+
+		    BFD_ASSERT (sym->n_numaux == 2);
+		    esyms = (bfd_byte *) obj_coff_external_syms (input_bfd);
+		    esyms += (symndx + 2) * bfd_coff_symesz (input_bfd);
+		    bfd_coff_swap_aux_in (input_bfd, (PTR) esyms, sym->n_type,
+					  sym->n_sclass, 1, sym->n_numaux,
+					  (PTR) &aux);
+		    olf = aux.x_bal.x_balntry;
+		  }
+
+		word = bfd_get_32 (input_bfd,
+				   (contents
+				    + (rel->r_vaddr - input_section->vma)));
+		word = ((word + olf - val) & BAL_MASK) | BAL;
+		bfd_put_32 (input_bfd,
+			    word,
+			    (contents
+			     + (rel->r_vaddr - input_section->vma)));
+		done = true;
+	      }
+	      break;
+	    case C_SCALL:
+	      BFD_ASSERT (0);
+	      break;
+	    }
+	}
+
+      if (! done)
+	{
+	  if (howto->pc_relative)
+	    addend += input_section->vma;
+	  rstat = _bfd_final_link_relocate (howto, input_bfd, input_section,
+					    contents,
+					    rel->r_vaddr - input_section->vma,
+					    val, addend);
+	}
+
+      switch (rstat)
+	{
+	default:
+	  abort ();
+	case bfd_reloc_ok:
+	  break;
+	case bfd_reloc_overflow:
+	  {
+	    const char *name;
+	    char buf[SYMNMLEN + 1];
+
+	    if (symndx == -1)
+	      name = "*ABS*";
+	    else if (h != NULL)
+	      name = h->root.root.string;
+	    else
+	      {
+		name = _bfd_coff_internal_syment_name (input_bfd, sym, buf);
+		if (name == NULL)
+		  return false;
+	      }
+
+	    if (! ((*info->callbacks->reloc_overflow)
+		   (info, name, howto->name, (bfd_vma) 0, input_bfd,
+		    input_section, rel->r_vaddr - input_section->vma)))
+	      return false;
+	  }
+	}
+    }
+
+  return true;
+}
+
+/* Adjust the symbol index of any reloc against a global symbol to
+   instead be a reloc against the internal symbol we created specially
+   for the section.  */
+
+/*ARGSUSED*/
+static boolean
+coff_i960_adjust_symndx (obfd, info, ibfd, sec, irel, adjustedp)
+     bfd *obfd;
+     struct bfd_link_info *info;
+     bfd *ibfd;
+     asection *sec;
+     struct internal_reloc *irel;
+     boolean *adjustedp;
+{
+  struct coff_link_hash_entry *h;
+
+  *adjustedp = false;
+
+  h = obj_coff_sym_hashes (ibfd)[irel->r_symndx];
+  if (h == NULL
+      || (h->root.type != bfd_link_hash_defined
+	  && h->root.type != bfd_link_hash_defweak))
+    return true;
+
+  irel->r_symndx = h->root.u.def.section->output_section->target_index - 1;
+  *adjustedp = true;
+
+  return true;
+}
+
+#define coff_start_final_link coff_i960_start_final_link
+
+#define coff_relocate_section coff_i960_relocate_section
+
+#define coff_adjust_symndx coff_i960_adjust_symndx
+
+#define coff_bfd_reloc_type_lookup coff_i960_reloc_type_lookup
+
+#include "coffcode.h"
+
+const bfd_target icoff_little_vec =
+{
+  "coff-Intel-little",		/* name */
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_LITTLE,		/* data byte order is little */
+  BFD_ENDIAN_LITTLE,		/* header byte order is little */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+  '_',				/* leading underscore */
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
+
+ {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+   bfd_generic_archive_p, _bfd_dummy_target},
+ {bfd_false, coff_mkobject,	/* bfd_set_format */
+   _bfd_generic_mkarchive, bfd_false},
+ {bfd_false, coff_write_object_contents, /* bfd_write_contents */
+   _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
+
+
+const bfd_target icoff_big_vec =
+{
+  "coff-Intel-big",		/* name */
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_LITTLE,		/* data byte order is little */
+  BFD_ENDIAN_BIG,		/* header byte order is big */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+  '_',				/* leading underscore */
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+
+bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
+bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
+
+  {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+     bfd_generic_archive_p, _bfd_dummy_target},
+  {bfd_false, coff_mkobject,	/* bfd_set_format */
+     _bfd_generic_mkarchive, bfd_false},
+  {bfd_false, coff_write_object_contents,	/* bfd_write_contents */
+     _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
@@ -0,0 +1,203 @@
+/* BFD back-end for Motorola 68000 COFF binaries.
+   Copyright 1990, 91, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+#include "coff/m68k.h"
+#include "coff/internal.h"
+#include "libcoff.h"
+
+#ifndef LYNX_SPECIAL_FN
+#define LYNX_SPECIAL_FN 0
+#endif
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (2)
+
+#ifndef COFF_PAGE_SIZE
+/* The page size is a guess based on ELF.  */
+#define COFF_PAGE_SIZE 0x2000
+#endif
+
+/* Clean up namespace.  */
+#define m68kcoff_howto_table	_bfd_m68kcoff_howto_table
+#define m68k_rtype2howto	_bfd_m68kcoff_rtype2howto
+#define m68k_howto2rtype	_bfd_m68kcoff_howto2rtype
+#define m68k_reloc_type_lookup	_bfd_m68kcoff_reloc_type_lookup
+
+#ifdef ONLY_DECLARE_RELOCS
+extern reloc_howto_type m68kcoff_howto_table[];
+#else
+reloc_howto_type m68kcoff_howto_table[] = 
+{
+  HOWTO(R_RELBYTE,	       0,  0,  	8,  false, 0, complain_overflow_bitfield, LYNX_SPECIAL_FN, "8",	true, 0x000000ff,0x000000ff, false),
+  HOWTO(R_RELWORD,	       0,  1, 	16, false, 0, complain_overflow_bitfield, LYNX_SPECIAL_FN, "16",	true, 0x0000ffff,0x0000ffff, false),
+  HOWTO(R_RELLONG,	       0,  2, 	32, false, 0, complain_overflow_bitfield, LYNX_SPECIAL_FN, "32",	true, 0xffffffff,0xffffffff, false),
+  HOWTO(R_PCRBYTE,	       0,  0, 	8,  true,  0, complain_overflow_signed, LYNX_SPECIAL_FN, "DISP8",    true, 0x000000ff,0x000000ff, false),
+  HOWTO(R_PCRWORD,	       0,  1, 	16, true,  0, complain_overflow_signed, LYNX_SPECIAL_FN, "DISP16",   true, 0x0000ffff,0x0000ffff, false),
+  HOWTO(R_PCRLONG,	       0,  2, 	32, true,  0, complain_overflow_signed, LYNX_SPECIAL_FN, "DISP32",   true, 0xffffffff,0xffffffff, false),
+  HOWTO(R_RELLONG_NEG,	       0,  -2, 	32, false, 0, complain_overflow_bitfield, LYNX_SPECIAL_FN, "-32",	true, 0xffffffff,0xffffffff, false),
+};
+#endif /* not ONLY_DECLARE_RELOCS */
+
+#ifndef BADMAG
+#define BADMAG(x) M68KBADMAG(x)
+#endif
+#define M68 1		/* Customize coffcode.h */
+
+/* Turn a howto into a reloc number */
+
+#ifdef ONLY_DECLARE_RELOCS
+extern void m68k_rtype2howto PARAMS ((arelent *internal, int relocentry));
+extern int m68k_howto2rtype PARAMS ((reloc_howto_type *));
+extern reloc_howto_type *m68k_reloc_type_lookup
+  PARAMS ((bfd *, bfd_reloc_code_real_type));
+#else
+void
+m68k_rtype2howto(internal, relocentry)
+     arelent *internal;
+     int relocentry;
+{
+  switch (relocentry) 
+  {
+   case R_RELBYTE:	internal->howto = m68kcoff_howto_table + 0; break;
+   case R_RELWORD:	internal->howto = m68kcoff_howto_table + 1; break;
+   case R_RELLONG:	internal->howto = m68kcoff_howto_table + 2; break;
+   case R_PCRBYTE:	internal->howto = m68kcoff_howto_table + 3; break;
+   case R_PCRWORD:	internal->howto = m68kcoff_howto_table + 4; break;
+   case R_PCRLONG:	internal->howto = m68kcoff_howto_table + 5; break;
+   case R_RELLONG_NEG:	internal->howto = m68kcoff_howto_table + 6; break;
+  }
+}
+
+int 
+m68k_howto2rtype (internal)
+     reloc_howto_type *internal;
+{
+  if (internal->pc_relative) 
+  {
+    switch (internal->bitsize) 
+    {
+     case 32: return R_PCRLONG;
+     case 16: return R_PCRWORD;
+     case 8: return R_PCRBYTE;
+    }
+  }
+  else 
+  {
+    switch (internal->bitsize) 
+     {
+      case 32: return R_RELLONG;
+      case 16: return R_RELWORD;
+      case 8: return R_RELBYTE;
+     }
+  }
+  return R_RELLONG;    
+}
+
+reloc_howto_type *
+m68k_reloc_type_lookup (abfd, code)
+     bfd *abfd;
+     bfd_reloc_code_real_type code;
+{
+  switch (code)
+    {
+    default:			return NULL;
+    case BFD_RELOC_8:		return m68kcoff_howto_table + 0;
+    case BFD_RELOC_16:		return m68kcoff_howto_table + 1;
+    case BFD_RELOC_CTOR:
+    case BFD_RELOC_32:		return m68kcoff_howto_table + 2;
+    case BFD_RELOC_8_PCREL:	return m68kcoff_howto_table + 3;
+    case BFD_RELOC_16_PCREL:	return m68kcoff_howto_table + 4;
+    case BFD_RELOC_32_PCREL:	return m68kcoff_howto_table + 5;
+      /* FIXME: There doesn't seem to be a code for R_RELLONG_NEG.  */
+    }
+  /*NOTREACHED*/
+}
+
+#endif /* not ONLY_DECLARE_RELOCS */
+
+#define RTYPE2HOWTO(internal, relocentry) \
+  m68k_rtype2howto(internal, (relocentry)->r_type)
+
+#define SELECT_RELOC(external, internal) \
+  external.r_type = m68k_howto2rtype(internal);
+
+#define coff_bfd_reloc_type_lookup m68k_reloc_type_lookup
+
+#define coff_relocate_section _bfd_coff_generic_relocate_section
+
+#include "coffcode.h"
+
+const bfd_target 
+#ifdef TARGET_SYM
+  TARGET_SYM =
+#else
+  m68kcoff_vec =
+#endif
+{
+#ifdef TARGET_NAME
+  TARGET_NAME,
+#else
+  "coff-m68k",			/* name */
+#endif
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_BIG,		/* data byte order is big */
+  BFD_ENDIAN_BIG,		/* header byte order is big */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+#ifdef NAMES_HAVE_UNDERSCORE
+  '_',
+#else
+  0,				/* leading underscore */
+#endif
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
+
+ {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+   bfd_generic_archive_p, _bfd_dummy_target},
+ {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
+   bfd_false},
+ {bfd_false, coff_write_object_contents, /* bfd_write_contents */
+   _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE
+ };
@@ -0,0 +1,311 @@
+/* BFD back-end for Motorola 88000 COFF "Binary Compatability Standard" files.
+   Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define M88 1		/* Customize various include files */
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+#include "coff/m88k.h"
+#include "coff/internal.h"
+#include "libcoff.h"
+
+static bfd_reloc_status_type m88k_special_reloc
+  PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+static void rtype2howto PARAMS ((arelent *, struct internal_reloc *));
+static void reloc_processing
+  PARAMS ((arelent *, struct internal_reloc *, asymbol **, bfd *, asection *));
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (3)
+
+static bfd_reloc_status_type 
+m88k_special_reloc (abfd, reloc_entry, symbol, data,
+		    input_section, output_bfd, error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  reloc_howto_type *howto = reloc_entry->howto;
+
+  switch (howto->type)
+    {
+    case R_HVRT16:
+    case R_LVRT16:
+      if (output_bfd != (bfd *) NULL)
+	{
+	  /* This is a partial relocation, and we want to apply the
+	     relocation to the reloc entry rather than the raw data.
+	     Modify the reloc inplace to reflect what we now know.  */
+
+	  reloc_entry->address += input_section->output_offset;
+	}
+      else
+	{
+	  bfd_vma output_base = 0;
+	  bfd_vma addr = reloc_entry->address;
+	  bfd_vma x = bfd_get_16 (abfd, (bfd_byte *) data + addr);
+	  asection *reloc_target_output_section;
+	  long relocation = 0;
+
+	  /* Work out which section the relocation is targetted at and the
+	     initial relocation command value.  */
+
+	  /* Get symbol value.  (Common symbols are special.)  */
+	  if (bfd_is_com_section (symbol->section))
+	    relocation = 0;
+	  else
+	    relocation = symbol->value;
+
+	  reloc_target_output_section = symbol->section->output_section;
+
+	  /* Convert input-section-relative symbol value to absolute.  */
+	  if (output_bfd)
+	    output_base = 0;
+	  else
+	    output_base = reloc_target_output_section->vma;
+
+	  relocation += output_base + symbol->section->output_offset;
+
+	  /* Add in supplied addend.  */
+	  relocation += ((reloc_entry->addend << howto->bitsize) + x);
+
+	  reloc_entry->addend = 0;
+
+	  relocation >>= (bfd_vma) howto->rightshift;
+
+	  /* Shift everything up to where it's going to be used */
+
+	  relocation <<= (bfd_vma) howto->bitpos;
+
+	  if (relocation)
+	      bfd_put_16 (abfd, relocation, (unsigned char *) data + addr);
+	}
+
+      return bfd_reloc_ok;
+      break;
+
+    default:
+      if (output_bfd != (bfd *) NULL)
+	{
+	  /* This is a partial relocation, and we want to apply the
+	     relocation to the reloc entry rather than the raw data.
+	     Modify the reloc inplace to reflect what we now know.  */
+
+	  reloc_entry->address += input_section->output_offset;
+	  return bfd_reloc_ok;
+	}
+      break;
+    }
+
+  if (output_bfd == (bfd *) NULL)
+    return bfd_reloc_continue;
+
+  return bfd_reloc_ok;
+}
+
+static reloc_howto_type howto_table[] = 
+{
+  HOWTO (R_PCR16L,			/* type */
+	 02,				/* rightshift */
+	 1,				/* size (0 = byte, 1 = short, 2 = long) */
+	 16,				/* bitsize */
+	 true,				/* pc_relative */
+	 0,				/* bitpos */
+	 complain_overflow_signed,	/* complain_on_overflow */
+	 m88k_special_reloc,		/* special_function */
+	 "PCR16L",			/* name */
+	 false,				/* partial_inplace */
+	 0x0000ffff,			/* src_mask */
+	 0x0000ffff,			/* dst_mask */
+	 true),				/* pcrel_offset */
+
+  HOWTO (R_PCR26L,			/* type */
+	 02,				/* rightshift */
+	 2,				/* size (0 = byte, 1 = short, 2 = long) */
+	 26,				/* bitsize */
+	 true,				/* pc_relative */
+	 0,				/* bitpos */
+	 complain_overflow_signed,	/* complain_on_overflow */
+	 m88k_special_reloc,		/* special_function */
+	 "PCR26L",			/* name */
+	 false,				/* partial_inplace */
+	 0x03ffffff,			/* src_mask */
+	 0x03ffffff,			/* dst_mask */
+	 true),				/* pcrel_offset */
+
+  HOWTO (R_VRT16,			/* type */
+	 00,				/* rightshift */
+	 1,				/* size (0 = byte, 1 = short, 2 = long) */
+	 16,				/* bitsize */
+	 false,				/* pc_relative */
+	 0,				/* bitpos */
+	 complain_overflow_bitfield,	/* complain_on_overflow */
+	 m88k_special_reloc,		/* special_function */
+	 "VRT16",			/* name */
+	 false,				/* partial_inplace */
+	 0x0000ffff,			/* src_mask */
+	 0x0000ffff,			/* dst_mask */
+	 true),				/* pcrel_offset */
+
+  HOWTO (R_HVRT16,			/* type */
+	 16,				/* rightshift */
+	 1,				/* size (0 = byte, 1 = short, 2 = long) */
+	 16,				/* bitsize */
+	 false,				/* pc_relative */
+	 0,				/* bitpos */
+	 complain_overflow_dont,	/* complain_on_overflow */
+	 m88k_special_reloc,		/* special_function */
+	 "HVRT16",			/* name */
+	 false,				/* partial_inplace */
+	 0x0000ffff,			/* src_mask */
+	 0x0000ffff,			/* dst_mask */
+	 true),				/* pcrel_offset */
+
+  HOWTO (R_LVRT16,			/* type */
+	 00,				/* rightshift */
+	 1,				/* size (0 = byte, 1 = short, 2 = long) */
+	 16,				/* bitsize */
+	 false,				/* pc_relative */
+	 0,				/* bitpos */
+	 complain_overflow_dont,	/* complain_on_overflow */
+	 m88k_special_reloc,		/* special_function */
+	 "LVRT16",			/* name */
+	 false,				/* partial_inplace */
+	 0x0000ffff,			/* src_mask */
+	 0x0000ffff,			/* dst_mask */
+	 true),				/* pcrel_offset */
+
+  HOWTO (R_VRT32,			/* type */
+	 00,				/* rightshift */
+	 2,				/* size (0 = byte, 1 = short, 2 = long) */
+	 32,				/* bitsize */
+	 false,				/* pc_relative */
+	 0,				/* bitpos */
+	 complain_overflow_bitfield,	/* complain_on_overflow */
+	 m88k_special_reloc,		/* special_function */
+	 "VRT32",			/* name */
+	 false,				/* partial_inplace */
+	 0xffffffff,			/* src_mask */
+	 0xffffffff,			/* dst_mask */
+	 true),				/* pcrel_offset */
+};
+
+/* Code to turn an external r_type into a pointer to an entry in the
+   above howto table.  */
+static void
+rtype2howto (cache_ptr, dst)
+     arelent *cache_ptr;
+     struct internal_reloc *dst;
+{
+  if (dst->r_type >= R_PCR16L && dst->r_type <= R_VRT32)
+    {
+      cache_ptr->howto = howto_table + dst->r_type - R_PCR16L;
+    }
+  else
+    {
+      BFD_ASSERT (0);
+    }
+}
+
+#define RTYPE2HOWTO(cache_ptr, dst) rtype2howto (cache_ptr, dst)
+
+
+/* Code to swap in the reloc offset */
+#define SWAP_IN_RELOC_OFFSET  bfd_h_get_16
+#define SWAP_OUT_RELOC_OFFSET bfd_h_put_16
+
+
+#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section)	\
+  reloc_processing(relent, reloc, symbols, abfd, section)
+
+static void
+reloc_processing (relent, reloc, symbols, abfd, section)
+     arelent *relent;
+     struct internal_reloc *reloc;
+     asymbol **symbols;
+     bfd *abfd;
+     asection *section;
+{
+  relent->address = reloc->r_vaddr;
+  rtype2howto (relent, reloc);
+
+  if (((int) reloc->r_symndx) > 0)
+    {
+      relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
+    }
+  else
+    {
+      relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
+    }
+
+  relent->addend = reloc->r_offset;
+  relent->address -= section->vma;
+}
+
+#define BADMAG(x) MC88BADMAG(x)
+#include "coffcode.h"
+
+#undef coff_write_armap
+
+const bfd_target m88kbcs_vec =
+{
+  "coff-m88kbcs",		/* name */
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_BIG,		/* data byte order is big */
+  BFD_ENDIAN_BIG,		/* header byte order is big */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+  '_',				/* leading underscore */
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
+
+    {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+       bfd_generic_archive_p, _bfd_dummy_target},
+    {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
+       bfd_false},
+    {bfd_false, coff_write_object_contents, /* bfd_write_contents */
+       _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
@@ -0,0 +1,27 @@
+/* BFD back-end for Apple et al PowerPC Mac "XCOFF" files.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_SYM	pmac_xcoff_vec
+#define TARGET_NAME	"xcoff-powermac"
+
+/* Tweak coffcode.h based on this being a PowerMac instead of RS/6000. */
+
+#define POWERMAC
+
+#include "coff-rs6000.c"
@@ -0,0 +1,278 @@
+/* BFD back-end for Sparc COFF files.
+   Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+#include "coff/sparc.h"
+#include "coff/internal.h"
+#include "libcoff.h"
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (3)
+
+#define BADMAG(x) ((x).f_magic != SPARCMAGIC && (x).f_magic != LYNXCOFFMAGIC)
+
+/* The page size is a guess based on ELF.  */
+#define COFF_PAGE_SIZE 0x10000
+
+enum reloc_type
+  {
+    R_SPARC_NONE = 0,
+    R_SPARC_8,		R_SPARC_16,		R_SPARC_32, 
+    R_SPARC_DISP8,	R_SPARC_DISP16,		R_SPARC_DISP32, 
+    R_SPARC_WDISP30,	R_SPARC_WDISP22,
+    R_SPARC_HI22,	R_SPARC_22,
+    R_SPARC_13,		R_SPARC_LO10,
+    R_SPARC_GOT10,	R_SPARC_GOT13,		R_SPARC_GOT22,
+    R_SPARC_PC10,	R_SPARC_PC22,
+    R_SPARC_WPLT30,
+    R_SPARC_COPY,
+    R_SPARC_GLOB_DAT,	R_SPARC_JMP_SLOT,
+    R_SPARC_RELATIVE,
+    R_SPARC_UA32,
+    R_SPARC_max
+  };
+
+#if 0
+static CONST char *CONST reloc_type_names[] =
+{
+  "R_SPARC_NONE",
+  "R_SPARC_8",		"R_SPARC_16",		"R_SPARC_32",
+  "R_SPARC_DISP8",	"R_SPARC_DISP16",	"R_SPARC_DISP32",
+  "R_SPARC_WDISP30",	"R_SPARC_WDISP22",
+  "R_SPARC_HI22",	"R_SPARC_22",
+  "R_SPARC_13",		"R_SPARC_LO10",
+  "R_SPARC_GOT10",	"R_SPARC_GOT13",	"R_SPARC_GOT22",
+  "R_SPARC_PC10",	"R_SPARC_PC22",
+  "R_SPARC_WPLT30",
+  "R_SPARC_COPY",
+  "R_SPARC_GLOB_DAT",	"R_SPARC_JMP_SLOT",
+  "R_SPARC_RELATIVE",
+  "R_SPARC_UA32",
+};
+#endif
+
+/* This is stolen pretty directly from elf.c.  */
+static bfd_reloc_status_type
+bfd_coff_generic_reloc PARAMS ((bfd *, arelent *, asymbol *, PTR,
+				asection *, bfd *, char **));
+
+static bfd_reloc_status_type
+bfd_coff_generic_reloc (abfd, reloc_entry, symbol, data, input_section,
+			output_bfd, error_message)
+     bfd *abfd;
+     arelent *reloc_entry;
+     asymbol *symbol;
+     PTR data;
+     asection *input_section;
+     bfd *output_bfd;
+     char **error_message;
+{
+  if (output_bfd != (bfd *) NULL
+      && (symbol->flags & BSF_SECTION_SYM) == 0
+      && reloc_entry->addend == 0)
+    {
+      reloc_entry->address += input_section->output_offset;
+      return bfd_reloc_ok;
+    }
+
+  return bfd_reloc_continue;
+}
+
+static reloc_howto_type coff_sparc_howto_table[] = 
+{
+  HOWTO(R_SPARC_NONE,    0,0, 0,false,0,complain_overflow_dont,    bfd_coff_generic_reloc,"R_SPARC_NONE",    false,0,0x00000000,true),
+  HOWTO(R_SPARC_8,       0,0, 8,false,0,complain_overflow_bitfield,bfd_coff_generic_reloc,"R_SPARC_8",       false,0,0x000000ff,true),
+  HOWTO(R_SPARC_16,      0,1,16,false,0,complain_overflow_bitfield,bfd_coff_generic_reloc,"R_SPARC_16",      false,0,0x0000ffff,true),
+  HOWTO(R_SPARC_32,      0,2,32,false,0,complain_overflow_bitfield,bfd_coff_generic_reloc,"R_SPARC_32",      false,0,0xffffffff,true),
+  HOWTO(R_SPARC_DISP8,   0,0, 8,true, 0,complain_overflow_signed,  bfd_coff_generic_reloc,"R_SPARC_DISP8",   false,0,0x000000ff,true),
+  HOWTO(R_SPARC_DISP16,  0,1,16,true, 0,complain_overflow_signed,  bfd_coff_generic_reloc,"R_SPARC_DISP16",  false,0,0x0000ffff,true),
+  HOWTO(R_SPARC_DISP32,  0,2,32,true, 0,complain_overflow_signed,  bfd_coff_generic_reloc,"R_SPARC_DISP32",  false,0,0x00ffffff,true),
+  HOWTO(R_SPARC_WDISP30, 2,2,30,true, 0,complain_overflow_signed,  bfd_coff_generic_reloc,"R_SPARC_WDISP30", false,0,0x3fffffff,true),
+  HOWTO(R_SPARC_WDISP22, 2,2,22,true, 0,complain_overflow_signed,  bfd_coff_generic_reloc,"R_SPARC_WDISP22", false,0,0x003fffff,true),
+  HOWTO(R_SPARC_HI22,   10,2,22,false,0,complain_overflow_dont,    bfd_coff_generic_reloc,"R_SPARC_HI22",    false,0,0x003fffff,true),
+  HOWTO(R_SPARC_22,      0,2,22,false,0,complain_overflow_bitfield,bfd_coff_generic_reloc,"R_SPARC_22",      false,0,0x003fffff,true),
+  HOWTO(R_SPARC_13,      0,2,13,false,0,complain_overflow_bitfield,bfd_coff_generic_reloc,"R_SPARC_13",      false,0,0x00001fff,true),
+  HOWTO(R_SPARC_LO10,    0,2,10,false,0,complain_overflow_dont,    bfd_coff_generic_reloc,"R_SPARC_LO10",    false,0,0x000003ff,true),
+  HOWTO(R_SPARC_GOT10,   0,2,10,false,0,complain_overflow_bitfield,bfd_coff_generic_reloc,"R_SPARC_GOT10",   false,0,0x000003ff,true),
+  HOWTO(R_SPARC_GOT13,   0,2,13,false,0,complain_overflow_bitfield,bfd_coff_generic_reloc,"R_SPARC_GOT13",   false,0,0x00001fff,true),
+  HOWTO(R_SPARC_GOT22,  10,2,22,false,0,complain_overflow_bitfield,bfd_coff_generic_reloc,"R_SPARC_GOT22",   false,0,0x003fffff,true),
+  HOWTO(R_SPARC_PC10,    0,2,10,false,0,complain_overflow_bitfield,bfd_coff_generic_reloc,"R_SPARC_PC10",    false,0,0x000003ff,true),
+  HOWTO(R_SPARC_PC22,    0,2,22,false,0,complain_overflow_bitfield,bfd_coff_generic_reloc,"R_SPARC_PC22",    false,0,0x003fffff,true),
+  HOWTO(R_SPARC_WPLT30,  0,0,00,false,0,complain_overflow_dont,    bfd_coff_generic_reloc,"R_SPARC_WPLT30",  false,0,0x00000000,true),
+  HOWTO(R_SPARC_COPY,    0,0,00,false,0,complain_overflow_dont,    bfd_coff_generic_reloc,"R_SPARC_COPY",    false,0,0x00000000,true),
+  HOWTO(R_SPARC_GLOB_DAT,0,0,00,false,0,complain_overflow_dont,    bfd_coff_generic_reloc,"R_SPARC_GLOB_DAT",false,0,0x00000000,true),
+  HOWTO(R_SPARC_JMP_SLOT,0,0,00,false,0,complain_overflow_dont,    bfd_coff_generic_reloc,"R_SPARC_JMP_SLOT",false,0,0x00000000,true),
+  HOWTO(R_SPARC_RELATIVE,0,0,00,false,0,complain_overflow_dont,    bfd_coff_generic_reloc,"R_SPARC_RELATIVE",false,0,0x00000000,true),
+  HOWTO(R_SPARC_UA32,    0,0,00,false,0,complain_overflow_dont,    bfd_coff_generic_reloc,"R_SPARC_UA32",    false,0,0x00000000,true),
+};
+
+struct coff_reloc_map {
+  unsigned char bfd_reloc_val;
+  unsigned char coff_reloc_val;
+};
+
+static CONST struct coff_reloc_map sparc_reloc_map[] =
+{
+  { BFD_RELOC_NONE, R_SPARC_NONE, },
+  { BFD_RELOC_16, R_SPARC_16, },
+  { BFD_RELOC_8, R_SPARC_8 },
+  { BFD_RELOC_8_PCREL, R_SPARC_DISP8 },
+  { BFD_RELOC_CTOR, R_SPARC_32 }, /* @@ Assumes 32 bits.  */
+  { BFD_RELOC_32, R_SPARC_32 },
+  { BFD_RELOC_32_PCREL, R_SPARC_DISP32 },
+  { BFD_RELOC_HI22, R_SPARC_HI22 },
+  { BFD_RELOC_LO10, R_SPARC_LO10, },
+  { BFD_RELOC_32_PCREL_S2, R_SPARC_WDISP30 },
+  { BFD_RELOC_SPARC22, R_SPARC_22 },
+  { BFD_RELOC_SPARC13, R_SPARC_13 },
+  { BFD_RELOC_SPARC_GOT10, R_SPARC_GOT10 },
+  { BFD_RELOC_SPARC_GOT13, R_SPARC_GOT13 },
+  { BFD_RELOC_SPARC_GOT22, R_SPARC_GOT22 },
+  { BFD_RELOC_SPARC_PC10, R_SPARC_PC10 },
+  { BFD_RELOC_SPARC_PC22, R_SPARC_PC22 },
+  { BFD_RELOC_SPARC_WPLT30, R_SPARC_WPLT30 },
+  { BFD_RELOC_SPARC_COPY, R_SPARC_COPY },
+  { BFD_RELOC_SPARC_GLOB_DAT, R_SPARC_GLOB_DAT },
+  { BFD_RELOC_SPARC_JMP_SLOT, R_SPARC_JMP_SLOT },
+  { BFD_RELOC_SPARC_RELATIVE, R_SPARC_RELATIVE },
+  { BFD_RELOC_SPARC_WDISP22, R_SPARC_WDISP22 },
+  /*  { BFD_RELOC_SPARC_UA32, R_SPARC_UA32 }, not used?? */
+};
+
+static reloc_howto_type *
+coff_sparc_reloc_type_lookup (abfd, code)
+     bfd *abfd;
+     bfd_reloc_code_real_type code;
+{
+  unsigned int i;
+  for (i = 0; i < sizeof (sparc_reloc_map) / sizeof (struct coff_reloc_map); i++)
+    {
+      if (sparc_reloc_map[i].bfd_reloc_val == code)
+	return &coff_sparc_howto_table[(int) sparc_reloc_map[i].coff_reloc_val];
+    }
+  return 0;
+}
+#define coff_bfd_reloc_type_lookup	coff_sparc_reloc_type_lookup
+
+static void
+rtype2howto (cache_ptr, dst)
+     arelent *cache_ptr;
+     struct internal_reloc *dst;
+{
+  BFD_ASSERT (dst->r_type < (unsigned int) R_SPARC_max);
+  cache_ptr->howto = &coff_sparc_howto_table[dst->r_type];
+}
+
+#define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
+
+#define SWAP_IN_RELOC_OFFSET	bfd_h_get_32
+#define SWAP_OUT_RELOC_OFFSET	bfd_h_put_32
+/* This is just like the standard one, except that we don't set up an
+   addend for relocs against global symbols (otherwise linking objects
+   created by -r fails), and we add in the reloc offset at the end.  */
+#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr)                \
+  {                                                             \
+    coff_symbol_type *coffsym = (coff_symbol_type *) NULL;      \
+    if (ptr && bfd_asymbol_bfd (ptr) != abfd)                   \
+      coffsym = (obj_symbols (abfd)                             \
+                 + (cache_ptr->sym_ptr_ptr - symbols));         \
+    else if (ptr)                                               \
+      coffsym = coff_symbol_from (abfd, ptr);                   \
+    if (coffsym != (coff_symbol_type *) NULL                    \
+        && coffsym->native->u.syment.n_scnum == 0)              \
+      cache_ptr->addend = 0;                                    \
+    else if (ptr && bfd_asymbol_bfd (ptr) == abfd               \
+             && ptr->section != (asection *) NULL               \
+	     && (ptr->flags & BSF_GLOBAL) == 0)			\
+      cache_ptr->addend = - (ptr->section->vma + ptr->value);   \
+    else                                                        \
+      cache_ptr->addend = 0;                                    \
+    cache_ptr->addend += reloc.r_offset;			\
+  }
+
+/* Clear the r_spare field in relocs.  */
+#define SWAP_OUT_RELOC_EXTRA(abfd,src,dst) \
+  do { \
+       dst->r_spare[0] = 0; \
+       dst->r_spare[1] = 0; \
+     } while (0)
+
+#define __A_MAGIC_SET__
+
+/* Enable Sparc-specific hacks in coffcode.h. */
+
+#define COFF_SPARC
+
+#include "coffcode.h"
+
+const bfd_target
+#ifdef TARGET_SYM
+  TARGET_SYM =
+#else
+  sparccoff_vec =
+#endif
+{
+#ifdef TARGET_NAME
+  TARGET_NAME,
+#else
+  "coff-sparc",			/* name */
+#endif
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_BIG,	/* data byte order is big */
+  BFD_ENDIAN_BIG,	/* header byte order is big */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+  '_',				/* leading underscore */
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
+
+/* Note that we allow an object file to be treated as a core file as well. */
+    {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+       bfd_generic_archive_p, coff_object_p},
+    {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
+       bfd_false},
+    {bfd_false, coff_write_object_contents, /* bfd_write_contents */
+       _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
@@ -0,0 +1,35 @@
+/* BFD back-end for Motorola 68000 COFF binaries having underscore with name.
+   Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+   Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_SYM	m68kcoffun_vec
+#define TARGET_NAME	"coff-m68k-un"
+
+#define NAMES_HAVE_UNDERSCORE
+
+/* define this to not have multiple copy of m68k_rtype2howto
+   in the executable file */
+#define ONLY_DECLARE_RELOCS
+
+/* This magic number indicates that the names have underscores.
+   Other 68k magic numbers indicate that the names do not have
+   underscores.  */
+#define BADMAG(x) ((x).f_magic != MC68KBCSMAGIC)
+
+#include "coff-m68k.c"
@@ -0,0 +1,446 @@
+/* BFD back-end for WDC 65816 COFF binaries.
+   Copyright 1995 Free Software Foundation, Inc.
+   Written by Steve Chamberlain, <sac@cygnus.com>.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "obstack.h"
+#include "libbfd.h"
+#include "bfdlink.h"
+#include "coff/w65.h"
+#include "coff/internal.h"
+#include "libcoff.h"
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
+static reloc_howto_type howto_table[] =
+{
+  HOWTO (R_W65_ABS8,    0,  0, 8, false, 0, complain_overflow_bitfield, 0, "abs8", true, 0x000000ff, 0x000000ff, false),
+  HOWTO (R_W65_ABS16,   1,  0, 16, false, 0, complain_overflow_bitfield, 0, "abs16", true, 0x0000ffff, 0x0000ffff, false),
+  HOWTO (R_W65_ABS24,   0,  2, 32, false, 0, complain_overflow_bitfield, 0, "abs24", true, 0x00ffffff, 0x00ffffff, false),
+  HOWTO (R_W65_ABS8S8,  0,  0, 8, false, 0, complain_overflow_bitfield, 0, ">abs8", true, 0x000000ff, 0x000000ff, false),
+  HOWTO (R_W65_ABS8S16, 0,  0, 8, false, 0, complain_overflow_bitfield, 0, "^abs8", true, 0x000000ff, 0x000000ff, false),
+  HOWTO (R_W65_ABS16S8, 1,  0, 16, false, 0, complain_overflow_bitfield, 0, ">abs16", true, 0x0000ffff, 0x0000ffff, false),
+  HOWTO (R_W65_ABS16S16,1,  0, 16, false, 0, complain_overflow_bitfield, 0, "^abs16", true, 0x0000ffff, 0x0000ffff, false),
+  HOWTO (R_W65_PCR8,    0,  0, 8, false, 0, complain_overflow_bitfield, 0, "pcrel8", true, 0x000000ff, 0x000000ff, true),
+  HOWTO (R_W65_PCR16,   1,  0, 16, false, 0, complain_overflow_bitfield, 0, "pcrel16", true, 0x0000ffff, 0x0000ffff, true),
+  HOWTO (R_W65_DP,    0,  0, 8, false, 0, complain_overflow_bitfield, 0, "dp", true, 0x000000ff, 0x000000ff, false),
+
+};
+
+
+/* Turn a howto into a reloc number */
+
+#define SELECT_RELOC(x,howto) \
+  { x.r_type = select_reloc(howto); }
+
+#define BADMAG(x) (W65BADMAG(x))
+#define W65 1			/* Customize coffcode.h */
+#define __A_MAGIC_SET__
+
+
+/* Code to swap in the reloc */
+#define SWAP_IN_RELOC_OFFSET   bfd_h_get_32
+#define SWAP_OUT_RELOC_OFFSET bfd_h_put_32
+#define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
+  dst->r_stuff[0] = 'S'; \
+  dst->r_stuff[1] = 'C';
+
+
+static int
+select_reloc (howto)
+     reloc_howto_type *howto;
+{
+  return howto->type ;
+}
+
+/* Code to turn a r_type into a howto ptr, uses the above howto table
+   */
+
+static void
+rtype2howto (internal, dst)
+     arelent *internal;
+     struct internal_reloc *dst;
+{
+      internal->howto = howto_table + dst->r_type - 1;
+}
+
+#define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
+
+
+/* Perform any necessaru magic to the addend in a reloc entry */
+
+
+#define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
+ cache_ptr->addend =  ext_reloc.r_offset;
+
+
+#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
+ reloc_processing(relent, reloc, symbols, abfd, section)
+
+static void
+reloc_processing (relent, reloc, symbols, abfd, section)
+     arelent * relent;
+     struct internal_reloc *reloc;
+     asymbol ** symbols;
+     bfd * abfd;
+     asection * section;
+{
+  relent->address = reloc->r_vaddr;
+  rtype2howto (relent, reloc);
+
+  if (((int) reloc->r_symndx) > 0)
+    {
+      relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
+    }
+  else
+    {
+      relent->sym_ptr_ptr = (asymbol **)&(bfd_abs_symbol);
+    }
+
+
+
+  relent->addend = reloc->r_offset;
+
+  relent->address -= section->vma;
+  /*  relent->section = 0;*/
+}
+
+
+static int
+h8300_reloc16_estimate(abfd, input_section, reloc, shrink, link_info)
+     bfd *abfd;
+     asection *input_section;
+     arelent *reloc;
+     unsigned int shrink;
+     struct bfd_link_info *link_info;
+{
+  bfd_vma value;  
+  bfd_vma dot;
+  bfd_vma gap;
+
+  /* The address of the thing to be relocated will have moved back by 
+   the size of the shrink  - but we don't change reloc->address here,
+   since we need it to know where the relocation lives in the source
+   uncooked section */
+
+  /*  reloc->address -= shrink;   conceptual */
+
+  bfd_vma address = reloc->address - shrink;
+  
+
+  switch (reloc->howto->type)
+    {     
+    case R_MOVB2:
+    case R_JMP2:
+      shrink+=2;
+      break;
+
+      /* Thing is a move one byte */
+    case R_MOVB1:
+      value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+
+      if (value >= 0xff00)
+	{ 
+
+	  /* Change the reloc type from 16bit, possible 8 to 8bit
+	     possible 16 */
+	  reloc->howto = reloc->howto + 1;	  
+	  /* The place to relc moves back by one */
+	  /* This will be two bytes smaller in the long run */
+	  shrink +=2 ;
+	  bfd_perform_slip(abfd, 2, input_section, address);
+	}      
+
+      break;
+      /* This is the 24 bit branch which could become an 8 bitter, 
+       the relocation points to the first byte of the insn, not the
+       actual data */
+
+    case R_JMPL1:
+      value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+	
+      dot = input_section->output_section->vma +
+	input_section->output_offset + address;
+  
+      /* See if the address we're looking at within 127 bytes of where
+	 we are, if so then we can use a small branch rather than the
+	 jump we were going to */
+
+      gap = value - dot ;
+  
+      if (-120 < (long)gap && (long)gap < 120 )
+	{ 
+
+	  /* Change the reloc type from 24bit, possible 8 to 8bit
+	     possible 32 */
+	  reloc->howto = reloc->howto + 1;	  
+	  /* This will be two bytes smaller in the long run */
+	  shrink +=2 ;
+	  bfd_perform_slip(abfd, 2, input_section, address);
+	}
+      break;
+
+    case R_JMP1:
+
+      value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+	
+      dot = input_section->output_section->vma +
+	input_section->output_offset + address;
+  
+      /* See if the address we're looking at within 127 bytes of where
+	 we are, if so then we can use a small branch rather than the
+	 jump we were going to */
+
+      gap = value - (dot - shrink);
+  
+
+      if (-120 < (long)gap && (long)gap < 120 )
+	{ 
+
+	  /* Change the reloc type from 16bit, possible 8 to 8bit
+	     possible 16 */
+	  reloc->howto = reloc->howto + 1;	  
+	  /* The place to relc moves back by one */
+
+	  /* This will be two bytes smaller in the long run */
+	  shrink +=2 ;
+	  bfd_perform_slip(abfd, 2, input_section, address);
+	}
+      break;
+    }
+
+  
+  return shrink;
+}
+
+
+/* First phase of a relaxing link */
+
+/* Reloc types
+   large		small
+   R_MOVB1		R_MOVB2		mov.b with 16bit or 8 bit address
+   R_JMP1		R_JMP2		jmp or pcrel branch
+   R_JMPL1		R_JMPL_B8	24jmp or pcrel branch
+   R_MOVLB1		R_MOVLB2	24 or 8 bit reloc for mov.b
+
+*/
+
+static void
+h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
+			   dst_ptr)
+     bfd *abfd;
+     struct bfd_link_info *link_info;
+     struct bfd_link_order *link_order;
+     arelent *reloc;
+     bfd_byte *data;
+     unsigned int *src_ptr;
+     unsigned int *dst_ptr;
+{
+  unsigned int src_address = *src_ptr;
+  unsigned int dst_address = *dst_ptr;
+  asection *input_section = link_order->u.indirect.section;
+
+  switch (reloc->howto->type)
+    {
+    case R_W65_ABS8:
+    case R_W65_DP:
+      {
+	unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
+						       input_section);
+	bfd_put_8 (abfd, gap, data + dst_address);
+	dst_address += 1;
+	src_address += 1;
+      }
+      break;
+
+    case R_W65_ABS8S8:
+      {
+	unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
+						       input_section);
+	gap >>= 8;
+	bfd_put_8 (abfd, gap, data + dst_address);
+	dst_address += 1;
+	src_address += 1;
+      }
+      break;
+
+    case R_W65_ABS8S16:
+      {
+	unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
+						       input_section);
+	gap >>=16;
+	bfd_put_8 (abfd, gap, data + dst_address);
+	dst_address += 1;
+	src_address += 1;
+      }
+      break;
+
+    case R_W65_ABS16:
+      {
+	unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
+						       input_section);
+
+	bfd_put_16 (abfd, gap, data + dst_address);
+	dst_address += 2;
+	src_address += 2;
+      }
+      break;
+    case R_W65_ABS16S8:
+      {
+	unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
+						       input_section);
+	gap >>= 8;
+	bfd_put_16 (abfd, gap, data + dst_address);
+	dst_address += 2;
+	src_address += 2;
+      }
+      break;
+    case R_W65_ABS16S16:
+      {
+	unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
+						       input_section);
+	gap >>= 16;
+	bfd_put_16 (abfd, gap, data + dst_address);
+	dst_address += 2;
+	src_address += 2;
+      }
+      break;
+
+    case R_W65_ABS24:
+      {
+	unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
+						       input_section);
+	bfd_put_16 (abfd, gap, data + dst_address);
+	bfd_put_8 (abfd, gap>>16, data+dst_address+2);
+	dst_address += 3;
+	src_address += 3;
+      }
+      break;
+
+    case R_W65_PCR8:
+      {
+	int gap = bfd_coff_reloc16_get_value (reloc, link_info,
+					      input_section);
+	bfd_vma dot = link_order->offset 
+	  + dst_address 
+	    + link_order->u.indirect.section->output_section->vma;
+
+	gap -= dot + 1;
+	if (gap < -128 || gap > 127) {
+	  if (! ((*link_info->callbacks->reloc_overflow)
+		 (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+		  reloc->howto->name, reloc->addend, input_section->owner,
+		  input_section, reloc->address)))
+	    abort();
+	}
+	bfd_put_8 (abfd, gap, data + dst_address);
+	dst_address += 1;
+	src_address += 1;
+      }
+      break;
+
+    case R_W65_PCR16:
+      {
+	bfd_vma gap = bfd_coff_reloc16_get_value (reloc, link_info,
+						  input_section);
+	bfd_vma dot = link_order->offset 
+	  + dst_address 
+	    + link_order->u.indirect.section->output_section->vma;
+
+
+	/* This wraps within the page, so ignore the relativeness, look at the
+	   high part */
+	if ((gap & 0xf0000) != (dot & 0xf0000)) {
+	  if (! ((*link_info->callbacks->reloc_overflow)
+		 (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+		  reloc->howto->name, reloc->addend, input_section->owner,
+		  input_section, reloc->address)))
+	    abort();
+	}
+
+	gap -= dot + 2;
+	bfd_put_16 (abfd, gap, data + dst_address);
+	dst_address += 2;
+	src_address += 2;
+      }
+      break;
+    default:
+      printf("ignoring reloc %s\n", reloc->howto->name);
+      break;
+
+    }
+  *src_ptr = src_address;
+  *dst_ptr = dst_address;
+
+}
+
+#define coff_reloc16_extra_cases h8300_reloc16_extra_cases
+#define coff_reloc16_estimate h8300_reloc16_estimate
+
+#include "coffcode.h"
+
+
+#undef coff_bfd_get_relocated_section_contents
+#undef coff_bfd_relax_section
+#define coff_bfd_get_relocated_section_contents \
+  bfd_coff_reloc16_get_relocated_section_contents
+#define coff_bfd_relax_section bfd_coff_reloc16_relax_section
+
+
+
+bfd_target w65_vec =
+{
+  "coff-w65",			/* name */
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_LITTLE,		/* data byte order is little */
+  BFD_ENDIAN_LITTLE,		/* header byte order is little */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE ),
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC),	/* section flags */
+  '_',				/* leading char */
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+  bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+  bfd_getl16, bfd_getl_signed_16, bfd_putl16,	/* data */
+  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+  bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+  bfd_getl16, bfd_getl_signed_16, bfd_putl16,	/* hdrs */
+
+  {_bfd_dummy_target, coff_object_p,	/* bfd_check_format */
+   bfd_generic_archive_p, _bfd_dummy_target},
+  {bfd_false, coff_mkobject, _bfd_generic_mkarchive,	/* bfd_set_format */
+   bfd_false},
+  {bfd_false, coff_write_object_contents,	/* bfd_write_contents */
+   _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};
@@ -0,0 +1,110 @@
+/* BFD back-end for we32k COFF files.
+   Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
+   Contributed by Brendan Kehoe (brendan@cs.widener.edu).
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+#include "obstack.h"
+#include "coff/we32k.h"
+#include "coff/internal.h"
+#include "libcoff.h"
+
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (3)
+
+static reloc_howto_type howto_table[] = 
+{
+    {0},
+    {1},
+    {2},
+    {3},
+    {4},
+    {5},
+  HOWTO(R_DIR32,	       0,  2, 	32, false, 0,complain_overflow_bitfield, 0, "dir32",	true, 0xffffffff,0xffffffff, false),
+    {7},
+    {010},
+    {011},
+    {012},
+    {013},
+    {014},
+    {015},
+    {016},
+  HOWTO(R_RELBYTE,	       0,  0,  	8,  false, 0, complain_overflow_bitfield, 0, "8",	true, 0x000000ff,0x000000ff, false),
+  HOWTO(R_RELWORD,	       0,  1, 	16, false, 0, complain_overflow_bitfield, 0, "16",	true, 0x0000ffff,0x0000ffff, false),
+  HOWTO(R_RELLONG,	       0,  2, 	32, false, 0, complain_overflow_bitfield, 0, "32",	true, 0xffffffff,0xffffffff, false),
+  HOWTO(R_PCRBYTE,	       0,  0, 	8,  true,  0, complain_overflow_signed, 0, "DISP8",    true, 0x000000ff,0x000000ff, false),
+  HOWTO(R_PCRWORD,	       0,  1, 	16, true,  0, complain_overflow_signed, 0, "DISP16",   true, 0x0000ffff,0x0000ffff, false),
+  HOWTO(R_PCRLONG,	       0,  2, 	32, true,  0, complain_overflow_signed, 0, "DISP32",   true, 0xffffffff,0xffffffff, false),
+};
+
+/* Turn a howto into a reloc  nunmber */
+
+#define SELECT_RELOC(x,howto) { x.r_type = howto->type; }
+#define BADMAG(x) WE32KBADMAG(x)
+#define WE32K	1
+
+#define RTYPE2HOWTO(cache_ptr, dst) \
+	    (cache_ptr)->howto = howto_table + (dst)->r_type;
+
+#include "coffcode.h"
+
+#define coff_write_armap bsd_write_armap
+
+const bfd_target we32kcoff_vec =
+{
+  "coff-we32k",			/* name */
+  bfd_target_coff_flavour,
+  BFD_ENDIAN_BIG,		/* data byte order is big */
+  BFD_ENDIAN_BIG,		/* header byte order is big */
+
+  (HAS_RELOC | EXEC_P |		/* object flags */
+   HAS_LINENO | HAS_DEBUG |
+   HAS_SYMS | HAS_LOCALS | WP_TEXT),
+
+  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+  0,				/* leading underscore */
+  '/',				/* ar_pad_char */
+  15,				/* ar_max_namelen */
+
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
+  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
+
+ {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+   bfd_generic_archive_p, _bfd_dummy_target},
+ {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
+   bfd_false},
+ {bfd_false, coff_write_object_contents, /* bfd_write_contents */
+   _bfd_write_archive_contents, bfd_false},
+
+     BFD_JUMP_TABLE_GENERIC (coff),
+     BFD_JUMP_TABLE_COPY (coff),
+     BFD_JUMP_TABLE_CORE (_bfd_nocore),
+     BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
+     BFD_JUMP_TABLE_SYMBOLS (coff),
+     BFD_JUMP_TABLE_RELOCS (coff),
+     BFD_JUMP_TABLE_WRITE (coff),
+     BFD_JUMP_TABLE_LINK (coff),
+     BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+  COFF_SWAP_TABLE,
+};