in stable/4. An MFC of slightly later code than that of r144411 (scottl).
This is a direct commit to stable/4.
Obtained from: Erich Chen <erich at areca com tw>
This is a direct commit to stable/4 since lnc(4) was deprecated
and does not exist beyond this branch.
Submitted by: Paul Meng <[email protected]>
PR: kern/77982
commas due to our deconstruction of the line in cf/feature/dnsbl.m4.
PR: 120038
Submitted by: mattijs vreeling
Revision Changes Path
1.36 +1 -1 src/etc/sendmail/freebsd.mc
MFC: You can never have enough documentation.
Document the SENDMAIL_ALIASES, SENDMAIL_MAP_SRC, SENDMAIL_MAP_TYPE, and
SENDMAIL_START_SCRIPT
.Xr make.conf 5
variables.
These are used in
.Pa /etc/mail/Makefile .
PR: conf/40548
Revision Changes Path
1.140 +40 -0 src/share/man/man5/make.conf.5
update. Unfortunately, this problem (the need to recompile filters) was
found after the MFC. The release engineering team has asked for this
instead of doing a full backout of sendmail 8.14 in the RELENG_[456]
branches.
Requested by: re (bmah)
read per call to bge_start()).
In packet blasting tests using ttcp with tiny udp packets on an A64-3200
with a 64-bit 5701 on a 32-bit 33MHz PCI bus, this gives a speedup
from 347 kpps to 623 kpps. sendto() has a lot of software overheads,
but even with these the single PCI write per call to bge_start() almost
doubled the per-packet time. This is partly because the software
overheads are so large that the CPU can't keep up with a Gbps NIC that
can actually get anywhere near Gbps speed for tiny packets (347 kppps
for tiny packets is only about 21% of wire speed). When the CPU can't
keep up, it gets further behind because it ends up calling bge_start()
at least once for every packet, so any overheads in bge_start() are
not amortized across multiple packets. Thus the PCI read had an
especially high overhead.
For larger packets, the speedup is closer to the 1.8% claimed in rev.
1.108.
Rev.1.108 claims to eliminate a PCI write but actually eliminates a
PCI read. The write of the tx product index is not so costly as its
read, and cannot be eliminated completely. It could be coalesced in
some cases.
- Fix probe for 5708S adapters.
- Use LIST_FOREACH() in bce_ifmedia_upd().
- Compile fixes for BCE_DEBUG.
- Don't reset the chip in bce_watchdog() if we are in the routine because
of pause frames.
- Fix multicast hash.
feature (should safe a heart attack or two when seeing the security feature
enabled when it isn't / shouldn't be).
This bug is not present in any more recent RELENG_X (the code is
different by an order of magnitude), so no MFC.
- Add support for the 5752 and 5780 phys.
- Handle 10/100 only "bge" phys correctly.
- MFC some parts of 1.6 that among other things fix use of non-autoneg
media with bce(4).
- Use bus_dmamap_load_mbuf_sg() rather than a private simple callback in
conjuction with bus_dmamap_load_mbuf().
- Use bus_alloc_resource_any().
- Remove bogus BUS_DMA_ALLOCNOW flag.
group to read kernel memory. [1]
Disable handling of GNUTYPE_NAMES tar file entries by default,
since they can be used to extract files outside of the cwd. [2]
Security: FreeBSD-SA-06:25.kmem [1]
Security: FreeBSD-SA-06:26.gtar [2]
to talk to them) if they aren't listed as the destination of any interrupts
in the MP Table instead of panic'ing when we fail to set the APIC ID. The
new APIC code in 5.x+ has a similar check.
compiled by RELENG_6's compiler:
1.26: pass constraints as a parameter since chars and shorts need
different ones.
1.27: fix pedantic syntax errors.
1.40: don't use the '+' constraint so much, since gcc-3.3.mumble broke
it for non-register operands.
1.40 essentially backs outs 1.22, and also avoids using the "0"
constraint, and also remumbers asm parameters. 1.22 had already been
merged to RELENG_4 in 1.9.2.2 in order to fix compiling with -O0 with
RELENG_4's compiler. This turned out to be not future-proof. I think
the "0" constaint would work with gcc-3, but not using it is a better
way to fix compiling with -O0 in RELENG_4. Problems in this area go
back to gcc-2.early or gcc-1 when the "0" and "+" constraints didn't
exist and there were no correct alternatives for them. 1.9.2.1
unnecessarily used an incorrect alternative that happened to work
except for -O0.
This change is essentially null when compiled by RELENG_4's compiler.
For GENERIC, LINT and one other configuration, it changes no object
files except atomic.o compiled with -O0; for the latter it gives
different register allocation and some unused instructions.
readable. gcc-2.8 was last sighted in FreeBSD-3 and wasn't the system
compiler in any version of FreeBSD-4. The next change will improve
portability and might even work without ifdefs for gcc-2.8.
Add missing parentheses to fix a segmentation fault that is easily
reproducable with `jot -s " " 400 1 | column -t'. The bug was present
in the the original CSRG 'column -t' added in 1989.
memory address can be 0 only with certain misconfigurations. We don't
try to detect misconfigurations of the kernel config file, but IIRC the
panic was caused by a hardware misconfiguration like the following:
- a cy PCI card physically present but with a hardware conflict
- then the cy PCI probe is called first but fails due to the conflict
- no cy ISA card present
- the cy ISA probe is called. Normally this uses the nonzero memory
address in the config file and just fails when there is no cy ISA
card present, but when there is a cy PCI card present, the ISA memory
resource is apparently lost. The (non-)presence of the cy ISA card
probably makes no difference here.
Reads worked correctly using the IU format. Writes only supported
signed integers using the CTLTYPE_INT flag. sysctl(1) parses args for
CTLTYPE_INT using (int)strtol() and has no range checking of course,
so read-write of frequencies larger than INT_MAX always blindly corrupts
the frequency to INT_MAX (2G-1).
This keeps writing of TSC frequencies working up to 4GHz.
new PCI IDs, lots of style changes, suspend/resume methods. Things not
included include the INTR_FAST + taskqueue changes, link flapping
workarounds in em_ioctl(), and jumbo frame fixups for architectures that
require strict alignment.
created this file way back in April 2001 (on all other active branches
the section containing this tag has been obsoleted so it was only a
RELENG_4 problem).
I have no idea how this file ever compiled before, but my doc
toolchain suddenly started complaining about it.
CCB instead of using BUS_DMA_NOWAIT(). Since bus_dmamap_load() doesn't
support BUS_DMA_NOWAIT in 4.x, this could result in data corruption if
sufficient bounce pages weren't available.
Submitted by: scottl
- Removed updates to if_ibytes, if_obytes, if_imcasts, and if_omcasts.
- Match code in 6.x and HEAD for handling excessively fragmented mbufs for
TX.
- Handle ifconfig up when HW is down.
in the MP Table, use the slot (aka device) of the _child_ PCI device
on the child bus of the PCI-PCI bridge instead of the slot of the
PCI-PCI bridge on the parent bus of the bridge.
Correctly identify the user running opiepasswd(1) when the login name
differs from the account name. [2]
Modify timeout handling logic in sendmail(8) to correct a reported
signal handling race condition. [3]
Security: FreeBSD-SA-06:11.ipsec [1]
Security: FreeBSD-SA-06:12.opie [2]
Security: FreeBSD-SA-06:13.sendmail [3]
this change restores is wrong, it turns out the "proper" method is worse
in practice for existing machines. This is probably due to the fact that
using fixed priority with a physical broadcast destination effectively
broadcasts interrupts to all CPUs. Fixing that would require a lot more
work than just restoring the previous "incorrect" behavior and would
probably be riskier as well.
PR: kern/94160
Reported by: Richard Wiwatowski rjwiwat at internode dot on dot net
too late in the boot process - "cold" is guaranteed to be false at
SI_SUB_INT_CONFIG_HOOKS, but it was being KASSERTed as true. With
usb_cold_explore() now running at the correct time, it does need
to use polling mode and splusb(), so back out 1.26.2.14.
PR: usb/81524
Tested by: Eugene Grosbein
contains incorrect fractional second values (outside the range
0-999999).
Prior to this change users could create files with values outside
that range. Moreover, on 32-bit machines tv_usec offsets larger than
4.3s would result in an unnormalized AND wrong timestamp value,
due to overflow.
The addition of a locking assertion to vm_page_zero_invalid() has
revealed a long-time bug: vm_pager_get_pages() assumes that m[reqpage]
contains a valid page upon return from pgo_getpages(). In the case of
the device pager this page has been freed and replaced by a fake page.
The fake page is properly inserted into the vm object but m[reqpage] is
left pointing to a freed page. For now, update m[reqpage] to point to
the fake page.
Submitted by: tegge
Approved by: alc, rwatson (mentor)
Correct insecure temporary file usage in ee. [06:02]
Correct a race condition when setting file permissions, sanitize file
names by default, and fix a buffer overflow when handling files
larger than 4GB in cpio. [06:03]
Security: FreeBSD-SA-06:01.texindex
Security: FreeBSD-SA-06:02.ee
Security: FreeBSD-SA-06:03.cpio
revision 1.67
It seems ciss should ignore overrun and underrun on a SCSI INQUIRY
command. This fixes some weird booting issues on newer versions
of the firmware on the MSA20.
revision 1.66
Update PCI ids to add the E200, E200i, P400, and P400i storage
controllers. Remove the E400 since it is not a real product.
revision 1.65
There's no reason to check the valence. This allows ciss to work
on the P600.
Bug fix: a numeric flag specification in the substitute command would
cause the next substitute flag to be ignored.
While working at it, detect and report overflows.
policy routed by ipfw(4) to local IP address, and the previous destination
of the packet was reachable via an interface with checksum offloading
capabilities.
Not applicable to RELENG_5, RELENG_6 and HEAD.
Submitted by: Mihail Balikov <misho interbgc.com>
This includes the recent change to improve handling of the -P flag
on read-only files, addition of the -I option for better handling
of recursive deletes, a test for removal of / in the argument list,
removal of clause 3 from the BSD license, some small code cleanups,
and related mdoc and comment changes and improvements.
The Makefile change removes a spurious SRCS=, and WARNS?=
the RDONLY option, so subsequent call of UFS_TRUNCATE (ffs_truncate)
would not panic the system. This fixes a panic that can happen
when mounting a corrputed filesystem read-only, and reading data
from it.
Reviewed by: mckusick
date: 2005/09/24 21:41:47; author: krion; state: Exp; lines: +1 -1
Do not bitch about bsdpan modules not having origin.
Based on PR: bin/82269
Submitted by: Steven Hartland <killing at multiplay dot co dot uk>
MFC after: 3 days
date: 2005/09/24 19:41:56; author: krion; state: Exp; lines: +1 -1
Remove '\n' since it's redundant in case if file doesn't exist while
running 'pkg_info -g'
Based on PR: bin/42609
Submitted by: Jeff King <peff-freebsd at peff dot net>
MFC after: 3 days
HEAD to RELENG_4:
Add a new rc.conf entry, kerberos5_server_flags, which allows the
administrator to specify additional start-up flags to the Kerberos
5 Authentication Server.
Don't free a struct inodedep if another process is allocating saved
inode memory for the same struct inodedep in
initiate_write_inodeblock().
Handle disappearing dependencies in softdep_disk_io_initiation().
Delay freeing disk space for file system blocks until all
dirty buffers are safely released. This fixes softdep
problems on truncation (deletion) of files with dirty
buffers.
Fix bogus check. It was possible to panic the kernel by giving 0 length.
This is actually a local DoS, as every user can use /dev/crypto if there
is crypto hardware in the system and cryptodev.ko is loaded (or compiled
into the kernel).
Reported by: Mike Tancsa <[email protected]>
Tested by: Mike Tancsa <[email protected]>
Security: Local DoS on systems with crypto HW and with /dev/crypto available
Interpret correctly the glob(3) return value.
Previously, interactive commands specifying a non-existent file or
directory used to display an "out of memory error".
Allow PLAY_MSF, PLAY_TRACK, PLAY_TRACK_REL, PAUSE, PLAY_12 commands to pass
through umass(4), in order to make cdcontrol(1) to issue commands to a USB
CD driver.
The command IDs were obtained from the CAM subsystem. This was tested
on half dozen of USB CD drivers from different vendors.
Suggested by: "intron" <intron at intron dot ac>
PR: usb/83439
Reviewed by: sanpei
date: 2005/07/13 10:40:07; author: delphij; state: Exp; lines: +7 -4
Better memory handling:
- It is acceptable to call free(3) when the given pointer itself
is NULL, so we do not need to determine NULL before passing
a pointer to free(3)
- Handle failure of malloc(3)
Submitted by: Dan Lukes <dan at obluda cz>
PR: bin/83352
Approved by: re (scottl)
Fix a bug when shell expansion is done against dangling symlinks, by
converting the stat() call to a lstat() call, which will cover the
situation. One can exercise this bug by referring a dangling link with
something like */the-link.
Submitted by: Simon 'corecode' Schubert [corecode fs ei tum de]
Obtained from: NetBSD via DragonFlyBSD (NetBSD rev. 1.51 and DragonFly
rev. 1.6)
instead of attempting the reverse, because the ftp.1 target is executed
before the cdrom.1 target, which is optional. This has been broken
ever since the order of the targets was swapped and cdrom.1 was made
optional, which happened a very long time ago.
Obtained from: Redhat, Steve Grubb via RedHat
Security: CAN-2005-0953, CAN-2005-1260
Security: FreeBSD-SA-05:14.bzip2
Approved by: obrien
Correct TCP connection stall denial-of-service vulnerabilities.
MFC: rev 1.270 of tcp_input.c, rev 1.25 of tcp_seq.h by ps: When a TCP
packets containing a timestamp is received, inadequate checking of
sequence numbers is performed, allowing an attacker to artificially
increase the internal "recent" timestamp for a connection.
A TCP packets with the SYN flag set is accepted for established
connections, allowing an attacker to overwrite certain TCP options.
Security: CAN-2005-0356, CAN-2005-2068
Security: FreeBSD-SA-05:15.tcp
Approved by: cperciva
- amr should now work reliably on systems with more than 4GB of ram.
- Assign a static slot number to each command instead of doing a
linear search for free slots each time a command is needed.
- Fixes for the ioctl path.
A good portition of these changes were submitted by
David Sze <dsze at alumni dot uwaterloo dot ca>
MFC:
revision 1.6
date: 2004/12/28 00:07:56; author: rik; state: Exp; lines: +1 -1
Add FR support to sppp (MFCronyx).
Silence on: net@, current@, hackers@.
No objections: joerg
Requested by: by many (mostly Cronyx) users for a long long time.
MFC after: 10 days
PR: kern/21771, kern/66348, kern/14848
MFC:
revision 1.118
date: 2005/01/07 01:45:34; author: imp; state: Exp; lines: +2 -1
/* -> /*- for license, minor formatting changes
----------------------------
revision 1.117
date: 2004/12/28 00:07:56; author: rik; state: Exp; lines: +38 -12
Add FR support to sppp (MFCronyx).
Silence on: net@, current@, hackers@.
No objections: joerg
Requested by: by many (mostly Cronyx) users for a long long time.
MFC after: 10 days
----------------------------
revision 1.116
date: 2004/12/14 18:18:54; author: rik; state: Exp; lines: +0 -2
Kill double inclusion for <netinet/in.h> and <netinet/in_systm.h>.
----------------------------
revision 1.111
date: 2004/06/25 10:25:33; author: rik; state: Exp; lines: +2 -1
Do not count loobacks as other fuilures.
As a result magic will not be rejected any more in case of loopback.
Discussed with: joerg@
----------------------------
revision 1.108
date: 2004/05/25 21:54:07; author: rik; state: Exp; lines: +2 -2
Keepalive timer should be added if we does not have any sppp consumers
before and should be deleted if we do not have any anymore.
----------------------------
revision 1.107
date: 2004/03/14 01:32:44; author: rwatson; state: Exp; lines: +2 -2
Compare spppq to NULL instead of using spppq as a boolean.
PR: kern/21771, kern/66348, kern/14848
MFC:
revision 1.976
date: 2004/12/28 00:07:56; author: rik; state: Exp; lines: +2 -0
Add FR support to sppp (MFCronyx).
Silence on: net@, current@, hackers@.
No objections: joerg
Requested by: by many (mostly Cronyx) users for a long long time.
MFC after: 10 days
PR: kern/21771, kern/66348, kern/14848
passed to kernel_sysctl() to fix an unaligned exception on Alpha. This
is not an MFC as the code in 5.x is very different.
Reported by: Eric Millbrandt emillbrandt at coldhaus dot com
Move couple of directories out of mtree and into their respective
ports. This mtree now specifies basic structure of X11BASE, similarly
to BSD.local.dist.
- Add missing manual page links for sysctl_add_oid(9).
The rman(9) parts of 1.212 are not MFC'ed since 4.X does not have
rman(9).
PR: docs/60088
Submitted by: le
date: 2005/05/24 08:26:44; author: cperciva; state: Exp; lines: +1 -0
Add an -I option to pkg_version:
-I Use only the index file for determining if a package is out of
date. This is much faster than using the version number from a
port's Makefile, at the expense of potentially giving an incor-
rect result if the index file is out of date.
Without this option, the index file is only consulted if "make -V PKGNAME"
cannot be used.
Belatedly document the disabling of Hyper-Threading. Security issues
are not normally documented in UPDATING on the stable branches, but
since this is a user-visible change, it needs to be here.
This is not an MFC since Hyper-Threading is enabled by default in HEAD.
Pointed out by: Erik Trulsson, via freebsd-stable
Revision Changes Path
1.342.2.30 +5 -0 src/UPDATING
make sure that the socket is either accepting connections or is connected
when attaching a knote to it... otherwise return EINVAL...
Suggested by: dclark at applmath.scu.edu
This code is only used when rlogin is compiled with Kerberos 4
support, and since the Kerberos code in rlogin has been removed from
FreeBSD 5.0 and newer, this is not an MFC.
It is not believed that this bug could be exploited as a security
vulnerability.
PR: bin/80661
Submitted by: Przemyslaw Frasunek <[email protected]>
Approved by: cperciva
- Changed from using explicit devices id to using descriptive labels.
- Added support for 82573 and 82546 Quad adapters.
- Corrected support for 82547EI and 82541ER (mac_type was not assigned)
- Removed #ifdef DBG_STATS and extraneous code.
- Corrected incorrect Packet Buffer assignment for 82541.
- Cleaned up a few typos and style nits.
PR: None
- Changed from using explicit devices id to using descriptive labels.
- Added support for 82573 and 82546 Quad adapters.
- Corrected support for 82547EI and 82541ER (mac_type was not assigned)
- Removed #ifdef DBG_STATS and extraneous code.
- Corrected incorrect Packet Buffer assignment for 82541.
- Cleaned up a few typos and style nits.
PR: None
problems for others. Rest assured you haven't seen the end of these..
As soon as I get back to a test environment I can use for finding the
problem I'm try again.
from getnameinfo(3). This improves API compatibility with other POSIX
complaint operating systems.
PR: standards/80008
Requested by: Xin Liu <[email protected]>
Reviewed by: freebsd-standards (das)
1. Copy a NULL-terminated string into a fixed-length buffer, and
2. copyout that buffer to userland,
we really ought to
0. Zero the entire buffer
first.
Security: FreeBSD-SA-05:08.kmem
- replace use of a spinlock with a mutex.
- enclose getservby{name,port}(3) call with mutex lock.
- protect _hostconf_init_done and _hostconf_init() call with mutex lock.
lib/libc/net/getaddrinfo.c: 1.41
lib/libc/net/name6.c: 1.33
lib/libc/net/getnameinfo.c: 1.14.6.1, 1.14.6.2
usable. In particular:
* disable unix password authentication (ie: do kerberos only)
* install k5su setuid by default
* allow instances for things like ksu to the www account instead
of only doing this for root.
This stuff is only enabled by make.conf switches.
Also bring in the code that probves the non EHCI controllers
after the EHCI controllers, thus ensuring that high speed
devices are not pingponged all aver theplace during startup.
the ``ip'' man page.
o put the word ``raw'' somewhere in
the title of the ``ip'' man page.
PR: docs/30873
Submitted by: Douglas De Couto <[email protected]>
Approved by: trhodes (mentor)
Correct multiple security related errors: a buffer overflow, NULL
pointer dereferences, possible use of uninitialized variables, and
memory leaks.
Security: CAN-2005-0753
Security: FreeBSD-SA-05:05.cvs
Approved by: peter
This gets the HW to work but not to deal with SATA errors. So if
the drive has a read error it will probably lock up. This is
a small subset of my patches that do deal with these errors and
other issues in FreeBSD and ata-raid.
Sponsored by: IronPort Systems
- Return POLLHUP rather than POLLIN/POLLOUT on TS_ZOMBIE ttys
- Remove unneeded POLLWRNORM (old bug)
- TS_ZOMBIE ttys will set POLLIN and POLLRDNORM
- Do not call selrecord in TS_ZOMBIE ttys
PR: kern/73821
that we can tsleep on. This bug is not present in 5.x since we have a
real thread context there. Suggested by jhb.
Submitted by: Dinesh Nair (dinesh alphaque.com)
Change the PATH for pkg_add to be the same used for pointyhat package builds.
This will give our users and porters a more consistent experience between
installing ports and installing packages.
revision 1.224
date: 2005/02/27 15:12:50; author: mux; state: Exp; lines: +10 -10
Fix a stupid bogon from myself, sc->revision wasn't initialized when
testing it to know whether we should enable the 82503 serial mode...
Move code to the right location and disallow the use of the 82503
serial mode if the sc->revision field is 0 again. This makes fxp(4)
work correctly with ATMEL 350 93C46 cards (3 port 82559 based with a
82555 PHY), as well as with the older ATMEL 220 93C46 (same flavour)
and with the even older 10Mbps-only 82557 cards with the 82503 serial
interface.
Tested by: Andre Albsmeier <[email protected]>, krion
Fix a problem in the Skinny ALG where a specially crafted packet could cause
a libalias application (e.g. natd, ppp, etc.) to crash. Note: Skinny support
is not enabled in natd or ppp by default.
Approved by: nectar (secteam)
Security: This fixes a remote DoS exploit
- In constructor(), don't initialize if_addrhead; if_attach()
will do it for us.
- In rcvdata(), don't try to emulate m_adj() and just let
ether_input() do its job.
- Add support for node removal (a-la hardware detach).
o ng_eiface.c#1.3
Allow a changed MAC address to show up in ifconfig by changing
it in the ifaddr list as well.
o ng_eiface.c#1.10
Check the correct set of interface flags and fix a memory leak.
o ng_eiface.c#1.12, ng_eiface.h#1.6
Use the (now standard) Ethernet address parse type.
u_int to the IPX address structure, which introduced strong alignment
requirements for the structure, which in turn caused problems for MARS.
Reported by: "Igor B. Bykhalo" <goshik at binep dot ac dot ru>
Casting the result of the 64 bit division to 32 bits (thus discarding the
upper 32 bits) and then looking at the truncated result to try and figure
out if the untruncated result would fit in 32 bits was utterly useless.
I am still not sure that it is right, but it has a chance of working now.
I'm not at all sure about the sign handling. NFSv3 only reports positive
values here, but correctness of handling the 63/64 bit signs on nfs
volumes is not a problem we'll likely have to deal with for some time. I
think the "most correct" test is for an unsigned division testing for
exceeding LONG_MAX, since we should never end up with a negative number to
compare against LONG_MIN.
in the kernel NFS code, df itself was broken. It tries to re-factor the
statfs blocks / blocksize into whatever the user requested. Thus, it must
be able to report >2TB file systems correctly, which means it must deal
with 64 bit block counts.
date: 2002/09/07 04:59:49; author: peter; state: Exp; lines: +1 -0
Supposedly linux has added a 6th syscall arg register (%ebp). I am not
100% sure if this is enough, but it will not harm anything.
This appears to fix some breakage with the emulation of linux's mmap2().
When that function became available recently the linux executables started
using it which broke installing the emulators/linux_base-8 port.
Pointer from: akiyama
MFS after: 1 day
The tcp syncache code was leaving the IPv6 flowlabel uninitialised
for the SYN|ACK packet and then letting in6_pcbconnect set the
flowlabel later. Arange for the syncache/syncookie code to set and
recall the flow label so that the flowlabel used for the SYN|ACK
is consistent. This is done by using some of the cookie (when tcp
cookies are enabeled) and by stashing the flowlabel in syncache.
commits, but libdisk is just plain lame. Being required to teach it about
each disk device name is part of the magic folklore that is just plain
wrong. This is one of the many many many reasons why libdisk & sysinstall
need to be thrown away and rebuilt from scratch. No amount of tweaking
and fixing them will make them better.
sources from HEAD, as opposed to a forward port of the original IBM 4.x
sources. As such, it benefits from the many reliability improvements
that have happened to the driver in HEAD. This is a RELENG_4_11 candidate.
became necessary due to the plans for using linux_base-8 for the 4.11
release. Among other things running "/compat/linux/bin/ls -l" dumped
core because it tried to use completely non-existent system calls. We
don't actually implement the system calls it's trying to use but we at
least need to have something in place that returns an error code.
Things being added:
- wrapper for mmap2(2) from
sys/compat/linux/linux_machdep.c v1.31
sys/compat/linux/linux_dummy.c v1.35
- add dummy entries for fadvise64(2) and *xattr(2) family of syscalls from
sys/compat/linux/linux_dummy.c v1.37
- add ENOATTR error code because that is what the *xattr(2) family of
syscalls returns, which in turn required tweaking the error code
translation table in the NFS server code[1].
- add $FreeBSD$ token to lib/libc/gen/errlst.c so it passes pre-commit
check script...
[1] Noticed by rwatson.
Requested by: nectar
Reviewed by: nectar, sobomax, re@
Tested by: nectar, ceri
MFS after: 2 days
date: 2005/01/04 19:30:14; author: mux; state: Exp; lines: +1 -1
Allow fxp(4) cards with a revision id of 0 to use the 82503 serial
interface as well. This is not an expected revision id per the
datasheet, but unfortunately there are such cards out there with
a 82557 chipset, and they want to use the 82503.
PR: kern/75739
Reported by: Andre Albsmeier <[email protected]>
- some SATA controllers were erroneously marked as SCSI, correct that
- move those controllers into the right place
- mention that the driver supports SATA
- bump .Dd
v1.50 of ata-lowlevel.c. From his log message:
Log:
Compensate for off by one bugs in disk firmware for 48BIT addressing cutover.
Requested by: marck
Glanced at by: sos
MFC after: 2 days
got to the point there wasn't enough space to put much more than the
basic gnome2-lite/kde-lite packages on disc1 which was painful. So
for 4.11 we're going to make a disc1-gnome and disc1-kde which allows
us to put back a bunch of packages that have been slowly stripped out
of disc1 due to size issues. Set the environment variable PKG_WINDOW
to select which base windowing system to include, default is gnome.
MFC after: 2 days
list, skip blocks that are too big by a factor of two or greater.
This avoids some cases of extremely inefficient memory use that can
occur when large (e.g. 64k) blocks on the free list get used when
allocating a 4k chunk of 64-byte fragments. Because fragments have
their own free list, the 60k difference got lost forever every time.
Replace the static "qdat" structure with a per-instance softc field
in all USB ethernet drivers. The qdat structure contains a pointer
to the interface's struct ifnet and is used to process incoming
packets, so simultaneous use of two similar devices caused crashes
and confusion.
PR: kern/59290
change wasn't included:
- Set the CAM status to CAM_SCSI_STATUS_ERROR rather than CAM_REQ_CMP
in case of a CHECK CONDITION.
Noticed by: Uwe Doering <[email protected]>
sizing for 88E8001 parts. Fix off-by-one in VPD data read. Correct handling
of jumbo frames for Yukon based devices.
PR: kern/75460
Committed on behalf of: bz
- call the driver 'bktr' instead of 'brooktree' throughout the document
- add a HARDWARE section
- add a more descriptive NAME section
- update for recently imported Pinnacle PCTV support
- add Branko Lankester, the original author of the PCTV patches,
to the AUTHORS section
- bump .Dd
Fix a bug where an aborted command was removed from the
queue but not from the hardware's cache of it, leading to the
hardware DMAing into "freed" memory buffers. (leading to crashes when
a usb ransaction was timed, but but eventually happenned)
date: 2004/07/28 18:23:08; author: alc; state: Exp; lines: +2 -2
Correct a very old error in both vm_object_madvise() (originating in
vm/vm_object.c revision 1.88) and vm_object_sync() (originating in
vm/vm_map.c revision 1.36): When descending a chain of backing objects,
both use the wrong object's backing offset. Consequently, both may
operate on the wrong pages.
Quoting Matt, "This could be responsible for all of the sporatic madvise
oddness that has been reported over the years."
Reviewed by: Matt Dillon
Reviewed by: alc
Helped by: DFly vm_map.c rev 1.31, vm_object.c rev 1.17
Slightly reorganise part of the ohci_softintr() function
to better keep track of the total amoutn transferred during a
transfer. Seems similar to some code in the NetBSD version.
I notice they have incorporated matches from him so I don't know which
direction it went.
Submitted by: [email protected]
Obtained from: patches to make the ueagle driver work
The change in current had a real bugfix but when I merged it in to 4.x
it disappeared and only the formatting changes remained..
Oh well it's a diff reduction..
to quote Matt:
Fix a very serious bug in contigmalloc() which we inherited from FreeBSD-4.x.
The contigmalloc() code incorrectly assumes that a page in PQ_CACHE can
be reused without having to do any further checks and it unconditionally
busies and frees such pages, and assumes that the page becomes PQ_FREE even
though it might actually have gone to a PQ_HOLD state. Additionally the
contigmalloc() code unconditionally sets m->object to NULL, ignoring the
fact that the page will be in the VM page bucket hash table if object
happens to not be NULL, leading to page bucket hash table corruption.
The fix is two fold. First, we add checks for m->busy, (m->flags & PG_BUSY),
m->wire_count, and m->hold_count and do not reuse a page with any of those
set. We do this for all pages, not just PQ_CACHE pages, though it is
believed that it only needs to be done for PQ_CACHE pages. Second, we
replace the m->object = NULL assignment with an assertion that it is
already NULL, since it had better be NULL and we cannot just set it to NULL
unconditionally without blowing up the VM page hash table.
Symptoms of the bug include:
* Filesystem corruption, in particular with slower disk drivers (e.g.
like the 'twe' driver), or in systems with drivers which use
contigmalloc() a lot (e.g. require bounce buffers).
Mangled directory entries, bad indirect blocks (containing data instead
of indirect block pointers), and files containing other file's data.
* 'page not found in hash' panic.
This is the last major VM issue in DragonFly, one that has plagued in
particular David Rhodus (who is a heavy user of the 'twe' driver) for over
a year. I would never have found this bug if not for DR's persistence and
the dozens of kernel cores he was able to provide me over the last year. We
finally got a core with a 'smoking gun', after having written a program
(/usr/src/test/debug/vmpageinfo.c) to run through all the VM pages and check
their hash table association for correctness it became obvious that pages
were being reused without being removed from the hash table which finally
led to contigmalloc*().
Many thanks to: David Rhodus! Free gift enclosed!
date: 2004/12/20 10:18:21; author: mux; state: Exp; lines: +2 -2
Only try to use the 82503 serial interface for the 82557 chipsets. The
datasheet says it is only valid for such chipsets and shouldn't be used
with others. This fixes some 82559 based cards which otherwise only
work at 10Mbit.
MFC after: 5 days
Tested by: krion
Never emit a message to stderr: use syslog instead.
When in inetd mode, this prevents bogus messages from
appearing on the control channel. When running as a
daemon, we shouldn't write to the terminal we used to
have at all.
buffer doesn't work for ipv6 packets, so use m_defrag() here instead as an
easy drop-in replacement.
PR: kern/70399
Submitted by: [email protected]
Reviewed by: darrenr
Approved by: re(kensmith)
Obtained from: [email protected]
revision 1.17
date: 2004/12/14 23:13:08; author: rik; state: Exp; lines: +1 -1
Bring back ability to use FR support with sppp from Cronyx.
Approved by: re (kensmith)
current problem of mfsroot.flp overflowing (note to self: can't speed up
test release builds for boot floppy sizes by using NODOC=). Address
original problem by removing sa (SCSI tape) and pass (SCSI passthrough)
devices.
Approved by: re (scottl)
Pointy hat: kensmith
lib/Makefile 1.155
libexec/Makefile 1.57
usr.bin/Makefile 1.234 (partly), 1.235
Build non-crypto telnet(1) and telnetd(8) if NO_OPENSSL is defined.
- Replace the check for the non-existence of src/secure and src/kerberosIV
with a check for the non-existence of src/crypto only. This is to bring
these checks in line with the demise of the NOSECURE knob and because
if src/crypto doesn't exist we won't build any crypto stuff including
not Kerberos IV (and also not Kerberos 5 for that matter).
Note: On HEAD all these checks for the existence of crypto sources even
have been completely removed.
Discussed with: ru (some months ago)
Reviewed by: ru (some months ago)
Approved by: markm (telnet and secure bits, some months ago)
(and therefore must not be used together with NOCRYPT or NO_OPENSSL).
Corresponds to:
share/man/man5/make.conf.5 1.73
share/examples/etc/make.conf 1.216
Reviewed by: ru (some months ago)
Unbreak world build if NO_OPENSSL is defined but MAKE_KERBEROS4 or
MAKE_KERBEROS5 are.
Reviewed by: ru (some months ago)
Approved by: markm (telnet and secure bits, some months ago)
Makefile.inc1 1.361
bin/ed/Makefile 1.22
lib/Makefile 1.157
lib/libcrypt/Makefile 1.31
lib/libfetch/Makefile 1.41
lib/libpam/modules/modules.inc 1.17
libexec/Makefile 1.61
share/examples/etc/make.conf 1.215
share/man/man5/make.conf.5 1.73
usr.bin/Makefile 1.239
usr.bin/fetch/Makefile 1.14
usr.sbin/pkg_install/Makefile 1.14
usr.sbin/pkg_install/add/Makefile 1.17
usr.sbin/pkg_install/info/Makefile 1.17
usr.sbin/pkg_install/version/Makefile 1.12
usr.sbin/ppp/Makefile 1.95, 1.96
usr.sbin/pppd/Makefile 1.25
usr.sbin/sendmail/Makefile 1.40
usr.sbin/tcpdump/tcpdump/Makefile 1.36
Retire the useless NOSECURE knob.
The motivation for this MFC is that MAKE_KERBEROS4 and MAKE_KERBEROS5
are meant to be buildable by various makefiles when NOSECURE is set but
this was broken because Kerberos depends on e.g. des(3) from OpenSSL
which wasn't built when NOSECURE was defined. Fixing the NOSECURE knob
however would have meant to make it do the same as the NOCRYPT knob.
If you had been using the NOSECURE build knob please now use the NOCRYPT
knob instead.
Discussed with: ru (some months ago)
Reviewed by: ru (some months ago)
Approved by: markm (telnet and secure bits, some months ago), kensmith (re)
supplied by the compiler and LINT is compiled with -no-builtin. Fix this
by defining abs() as a macro.
Another pointy hat for my collection...
Pointed out by: tinderbox, glebius, and ken.
1.42: Add a -k flag for querying whois.krnic.net (the National Internet
Development Agency of Korea) which hold details of IP address
allocations within Korea.
MFC whois.1:
1.33: Add a -k flag for querying whois.krnic.net (the National Internet
Development Agency of Korea) which hold details of IP address
allocations within Korea.
1.34: Bump document date.
Short MFC interval to get this into RELENG_4 before the freeze for
FreeBSD 4.11.
MFC ok'ed by: ceri
1.29: Mark a function as __printflike().
1.30: Leave the `copyright' variable exposed, since the main purpose of
it is to put a copyright in the object file.
1.35: Add support for identifying NORID (norwegian top level registry)
handles.
1.38: Add whois.iana.org to the whois(1) utility, under the -I option.
1.39: Add whois.abuse.net to whois(1).
1.40: Add -b to usage.
1.41: Add special case for the german whois nameserver.
MFC whois.1:
1.29: mdoc(7) police: markup polishing.
1.30: Add whois.iana.org to the whois(1) utility, under the -I option.
1.31: Date bump.
1.32: Add whois.abuse.net to whois(1).
- Set the CAM status to CAM_SCSI_STATUS_ERROR rather than CAM_REQ_CMP
in case of a CHECK CONDITION.
- Make this driver return SCSI status information.
- While here, factor out the clearing of the CAM status from every
element of the switch statement to only once before the switch.
MFC ok'ed by: scottl (some months ago)
for it. The change to struct if_data differs slightly from the one in
5.3 in that a pad is added after ifi_xmitquota rather then adding
ifi_link_state before ifi_recvquota. This is necessicary to maintain
the 4.x ABI.
added axe(4) needs to be here as well.
<quote>
# USB support
# (if you add any USB devices to this list, they must be added to the Alpha
# section of src/release/scripts/dokern.sh)
# USB Ethernet
</quote>
Forgotten by: rsm :-)
----------------------------
revision 1.25
date: 2004/07/07 19:36:12; author: simon; state: Exp; lines: +20 -1
Add a HARDWARE section.
For cx(4) this was based on information from the Hardware Notes.
OK'ed by: rik
----------------------------
revision 1.5
date: 2004/09/05 22:09:53; author: simon; state: Exp; lines: +16 -1
Add a HARDWARE section which lists supported devices based on the
Hardware Notes.
MFC after: 3 days
proxying applications. Modified methods of randomization which should
solve this problem are being worked on, and will hopefully make it in
before 4.11-release.
This commit simply changes the default sysctl setting, it does not remove
or change the randomization feature in any way.
When doing round-robin reads from a multi-plex volume, only switch to the
next plex if the sector to be read isn't nearby the last read sector.
Submitted by: Vsevolod Lobko <[email protected]> via ru@
Not only does this boost multi-access performance, but surprisingly it helps
single process sequential reads on my IDE disk mirror. My guess is that the
read-a-block skip-a-block read-a-block effect of strict round-robin defeats
some sort of on-disk caching, leading to poor performance. With this patch,
longer contiguous reads from a single disk are more common.
/sbin/vinum needs to be rebuilt as this patch changes the size of struct plex.
OK'd by: grog
date: 2004/08/03 02:01:44; author: hsu; state: Exp; lines: +1 -1
Fix bug with tracking the previous element in a list.
Found by: [email protected]
Submitted by: [email protected]
Fix off-by-one errors and potential buffer overruns
in handling file and link names that reach the allowed
maximum for old tar and ustar archive formats.
1) Fix a typo in a comment.
2) Merge macros that abstract locking and memory allocation.
3) Use the right bit of constant data when finishing hashing the name.
----------------------------
revision 1.35
date: 2004/12/03 16:57:15; author: rik; state: Exp; lines: +4 -2
Don not call pp_down()/pp_up() form XX_tlf()/XX_tls() in non PPP mode
to privent running of PPP's state machine in non PPP mode.
MFC: after 3 days.
----------------------------
revision 1.30
date: 2004/08/13 12:35:52; author: rik; state: Exp; lines: +6 -6
branches: 1.30.2;
Fix resource check while autodetection.
----------------------------
revision 1.17
date: 2004/12/03 16:57:15; author: rik; state: Exp; lines: +4 -2
Don not call pp_down()/pp_up() form XX_tlf()/XX_tls() in non PPP mode
to privent running of PPP's state machine in non PPP mode.
MFC: after 3 days.
----------------------------
revision 1.14
date: 2004/08/13 12:35:52; author: rik; state: Exp; lines: +6 -6
branches: 1.14.2;
Fix resource check while autodetection.
----------------------------
revision 1.14
date: 2004/12/03 16:57:15; author: rik; state: Exp; lines: +4 -2
Don not call pp_down()/pp_up() form XX_tlf()/XX_tls() in non PPP mode
to privent running of PPP's state machine in non PPP mode.
MFC: after 3 days.
the version now as a heads-up to users because this week typically means
increased developer activity and the branch is a tiny bit more volatile
than "usual".
tzdata on the 4-STABLE branch. For ongoing maintenance, users should
be aware that compiled zoneinfo formats are compatible across all
platforms and all versions of FreeBSD.
- Since divert protocol is not connection oriented, remove SS_ISCONNECTED flag
from divert sockets.
- Remove div_disconnect() method, since it shouldn't be called now.
- Remove div_abort() method. It was never called directly, since protocol
doesn't have listen queue. It was called only from div_disconnect(),
which is removed now.
- Document the DISABLE_VULNERABILITIES knob.
- Don't say this manual page is too long, it's not that long.
- s/man page/manual page/g
- Bump document date.
properly again. This is not a perfect fix but since this is only for 4.x
the 'not-goodness' of the patch will remain within this branch and should
never propogate.. "good enough for government work" as we say
in Australia.
PR: 69319
Submitted by: scott+freebsd at fishballoon dot org
little easier. Teach gdb how to look for thread info in core files. This
allows for more detailed post-mortem analysis of crashed programs as users
should now be able to use standard gdb commands to list all threads running
in the program at the time of the crash and switch between them to look at
their backtraces and inspect their frames.
Allow gdb to cleanly detach multithreaded programs.
Tested by: jhb
Approved by: obrien
Workaround a problem with Postfix MTA selection code when installing via
FTP by hard-coding the Postfix major and minor revision (for the current
stable version).
Approved by: trhodes
>alc 2004/05/21 21:53:52 PDT
>
> FreeBSD src repository
>
> Modified files:
> sys/vm vm_extern.h vm_fault.c vm_map.c vm_page.c
> Log:
> To date, unwiring a fictitious page has produced a panic. The reason
> being that PHYS_TO_VM_PAGE() returns the wrong vm_page for fictitious
> pages but unwiring uses PHYS_TO_VM_PAGE(). The resulting panic
> reported an unexpected wired count. Rather than attempting to fix
> PHYS_TO_VM_PAGE(), this fix takes advantage of the properties of
> fictitious pages. Specifically, fictitious pages will never be
> completely unwired. Therefore, we can keep a fictitious page's wired
> count forever set to one and thereby avoid the use of
> PHYS_TO_VM_PAGE() when we know that we're working with a fictitious
> page, just not which one.
>
> In collaboration with: green@, tegge@
> PR: kern/29915
Reviewed by: alc
This makes teh two systems disable each other's interrupts
while they are operating together.
It's not perfect as it doesn't fully cover dynamic devices
and teh effect is not reversible, but it is similar to the hack we have
been doing for ywars with slip and ppp.
Submitted by: lost the email.
pass1.c:1.43, pass2.c:1.26, pass3.c:1.15, pass4.c:1.15, pass5.c:1.4
with minor changes to match RELENG_4 code.
> truckman 2004-10-08 20:44:48 UTC
>
> FreeBSD src repository
>
> Modified files:
> sbin/fsck_ffs dir.c fsck.h fsutil.c inode.c main.c
> pass1.c pass2.c pass3.c pass4.c pass5.c
> Log:
> Eliminate linked list used to track inodes with an initial link
> count of zero and instead encode this information in the inode state.
> Pass 4 performed a linear search of this list for each inode in
> the file system, which performs poorly if the list is long.
>
> Reviewed by: sam & keramida (an earlier version of the patch), mckusick
> MFC after: 1 month
>
> Revision Changes Path
> 1.30 +2 -3 src/sbin/fsck_ffs/dir.c
> 1.33 +15 -15 src/sbin/fsck_ffs/fsck.h
> 1.25 +1 -3 src/sbin/fsck_ffs/fsutil.c
> 1.37 +2 -0 src/sbin/fsck_ffs/inode.c
> 1.42 +0 -8 src/sbin/fsck_ffs/main.c
> 1.43 +5 -16 src/sbin/fsck_ffs/pass1.c
> 1.26 +5 -1 src/sbin/fsck_ffs/pass2.c
> 1.15 +3 -3 src/sbin/fsck_ffs/pass3.c
> 1.15 +8 -11 src/sbin/fsck_ffs/pass4.c
> 1.40 +2 -0 src/sbin/fsck_ffs/pass5.c
Tested by: scrappy
of 'configXEnvironment', and add 'configXDesktop'.
Not applicable to 5.x or 6.x, since the X configuration stuff has been
ripped out of sysinstall(8) there.
PR: 62665
Submitted by: makham <[email protected]>
- Don't crash if the CROM is all zeros.
- Use new eui64(3) functions to print EUI-64s and to allow access to nodes
by EUI-64 and name.
- Add -m option, set default fwmem target.
Added support for Intel PRO/1000 GT Desktop Adapter(Device ID 8086 107C)
Removed support for Intel 82541ER
Added fix for 82547 which corrects an issue with Jumbo frames larger than 10k.
Added fix for vlan tagged frames not being properly bridged.
Corrected TBI workaround.
Corrected incorrect LED operation issues
functional and presently they are not back-ported, disable the
build of GB18030 locale by now so we won't get the 13K+ warnings
when doing ``make buildworld''.
Noticed by: ru
Approved by: murray (mentor)
The driver is designed for performing I/O under program control using
peripherals such as the Advantech PCL-724 card, which emulates the Intel
8255A PPI in mode 0. Other 8255A-based peripherals such as the BMCM
PIO24II card have also been reported to work.
PR: i386/46238
Approved by: re (kensmith)
The driver is designed for performing I/O under program control using
peripherals such as the Advantech PCL-724 card, which emulates the Intel
8255A PPI in mode 0. Other 8255A-based peripherals such as the BMC
Messsysteme PIO24II card have also been reported to work.
PR: i386/46238
Approved by: re (kensmith)
(this bug is specific to FreeBSD-4.x, so it's not committed to -CURRENT nor RELENG-5)
Reported in: freebsd-net ("Weird memory exhaustion with FreeBSD 4.10-STABLE" starting from Sep 23, 2004)
Obtained from: KAME
Approved by: re (scottl)
revision 1.10
date: 2003/09/18 17:00:03; author: jhb; state: Exp; lines: +1 -1
Fix a busted constant related to PCI configuration acess method #1. The
reserved bits in the port that must be zero are 24:30, not 20:30. Bits
16:23 are used to set the bus number. This meant that when we tested for
config mechanism #1, if the previous PCI configuration transaction sent
used a bus number greater than 15, one of the bits in 20:23 would be
non-zero and we would fail to use config mechanism #1 and thus fail to see
that PCI existed on the machine at all.
Approved by: jhb
date: 2004/09/15 08:19:03; author: delphij; state: Exp; lines: +7 -1
Clear all "active partition" bits before we set a new one.
This adds a safebelt that prevents users to mark more than
one "active" partitions, which will lead to a unbootable
machine, especially in multi-boot configurations.
Approved by: re (scottl), mentor (murray)
This is a direct commit to RELENG_4, because in 5.x the utility
of this change has been subsumed by ATAng and ports/sysutils/ataidle.
Approved by: re (kensmith)
Original patch by: Robert Sexton
date: 2002/10/06 09:09:27; author: charnier; state: Exp; lines: +11 -16
While removing a memory leak, rev 1.32 introduced a
free-memory-and-reuse-it-after. Correct both problems and
make rcp -r work again under /etc/malloc.conf -> AJ.
PR: bin/54969
Approved by: murray (mentor)
Increase PPTP_MAX_TIMEOUT up to 3 seconds. 10 proved too much for high
packet
loss links, and 1 second appeared to be too small for high latency links.
Apply EVL_VLANOFTAG() to a tag passed to vlan_input_tag() by a
VLAN-supporting Ethernet interface so the irrelevant bits (priority
etc) are cleared. Otherwise frames with non-zero dot1q priority
would not be directed to the right vlan interface if the parent
Ethernet interface didn't mask off the irrelevant bits by itself.
Refuse to configure a bogus VLAN ID on a vlan(4) interface.
When detaching an interface, don't leave an obsolete pointer to the
soon to be deleted struct ifnet around.
PR: kern/52260
Submitted by: Jinmei Tatuya <jinmei at isl.rdc.toshiba.co.jp>
relevant to RELENG_4, including documenting the following configuration
variables: DOC_LANG, DOCRELEASETAG, KERNEL_FLAGS, KERNELS, NOCDROM,
PORTSRELEASETAG, and WORLD_FLAGS.
Open a socket for a data transfer in active mode using euid
of the current user, not root, to allow matching the user's
FTP data traffic with an ipfw(8) rule.
struct ndblock's defn member instead of a duplicate allocated on the heap;
the address defn points to is significant, and is checked against the
address of "null" in certain conditionals.
PR: 59883
1.13 Add Epson Perfection 1670
1.14 Add Canon CanoScan LIDE 20 and 30 (and fix name of other Canon
scanners)
1.15 Update Document Date
Approved by: re (fake line to allow commits on RELENG_4 branch)
Do not attempt to clean up data that has not been initialized yet.
This fixes two kernel panics on boot when the xl driver fails to
allocate bus/port/memory resources.
- MFC of the package tools revision 20040629 changes.
- replace the perl version of pkg_version(1) by its C equivalent,
which means that `pkg_version -c' does no longer work
- keep the perl version of pkg_update(1) until a replacement is available
- include some man pages fixes
modules, allowing in particular /usr to be mounted read-only. This
change won't be MFS'ed, because semantics of installing modules in 5.x
is slightly different from 4.x.
PR: 68150
information being sent to the RADIUS server.
Logging of RADIUS accounting information moves to a ``set log [+-]radius''
level, along with the RADIUS alive info, and the version number is bumped
to 3.2 to reflect this.
Mostly submitted by: [email protected] (back in January)
This commit imports following commit to RELENG_4:
src/usr.sbin/kbdcontrol/kbdcontrol.1 rev 1.27
src/usr.sbin/kbdcontrol/kbdcontrol.c rev 1.34, 1.35
If my build sandbox works as expected, Jul/17/2004 or later RELENG_4
release build is broken iff old build environment is used. This is because
that even if a new keymap hits the tree, release build doesn't see src/
directory but /usr/share/syscons/keymaps.
About three years before, 5-current had a fix for that by sobomax, but
it was not MFCed yet. Let me give a chance to fix for RELENG_4.
Tested on: tora.jp.FreeBSD.org
(aka snapshots.jp.FreeBSD.org RELENG_4 buildbox)
Restore part of the word that got (accidentally) removed.
Removed whitespace at EOL.
Document the behaviour of the "-o file" option when "file" is a directory
(downloaded file(s) are created inside the directory).
Prevent abnormal termination of a child daemon process when created
by a parent that is a session leader (e.g., login shell) by ignoring
SIGHUP before calling fork(2) and then restoring SIGHUP's action
after setsid(3). Based on the patch by Martin Kammerhofer
<[email protected]>.
This has been in -current for 8 months with no reports of adverse
affects.
PR: bin/25462
Prompted-by: [email protected]
---snip---
New defines that paves the way for new midi features and ports.
Changes consists of an IOCTL (SNDCTL_SEQ_GETTIME) and a constant.
---snip---
PR: 59233
Approved by: matk
Requested by: lofi
ignore two more bogus return values sent by some hardware.
PR: kern/61482, kern/54188
Submitted by: Ulf Lilleengen <[email protected]>,
Victor Balada Diaz <[email protected]>
variable, but conveniently, because ncpaddr.ncpaddr_family !=
AF_INET, the call to ncpaddr_getip4addr() became a no-op leaving
the local address as it was (defaulting to whatever my hostname
resolves to).
Update the usage string in the limits(1) manpage to include -b for
sbsize. Also, correct the format string in getopt(3) usage to reflect
that -b takes an argument, and correct another case of RLIMIT_SBSIZE
having been forgotten.
ready to handle all its aspects. Failure to deal with HTTP/1.1,
with chunked transfer encoding in particular, led to broken transfers
and data corruption. Fall back to using HTTP/1.0, which is safe.
A point to note: While the "Host:" header had not been in the
original HTTP/1.0 standard, it became a de-facto standard for
HTTP/1.0 as well. It is understood by servers in HTTP/1.0
sessions if supported at all.
This issue doesn't apply to CURRENT since lukemftp handles HTTP/1.1
correctly.
PR: bin/68547
Reviewed by: vs
in -STABLE's make. The MAKE_SHELL description seems to have crept into
the merge in rev. 1.12.2.24.
PR: 65615
Submitted by: Matthew Seaman <[email protected]>
Deal with the possibility of negative available space from the file server
to avoid Bad Things(TM) happening (eg: df crashing with a floating point
exception).
to make.conf(5) to have a `deptree' target in all makefiles:
.NOTMAIN: deptree
deptree:
@echo 'Dependency tree for ${MAKE} in ${.CURDIR}:'
@l=1; \
for d in ${.MAKEFILE_LIST}; do \
case "$$d" in \
..) l=$$(($$l-2));; \
/*) printf '%-*s%s\n' $$l '' "`realpath \"$$d\"`"; \
l=$$(($$l+2));; \
*) printf '%-*s%s\n' $$l '' \
"`realpath \"${.OBJDIR}/$$d\"`"; \
l=$$(($$l+2));; \
esac \
done
1.128 Terminate program names if we hit a '/'.
1.127 Log file name may be prefixed by a '-' if it shouldn't be synced.
1.126 Be more careful about using using the file descriptor f_file.
1.125 String fixes (inspired by OpenBSD).
1.124 Warn about paths that are too long (OpenBSD).
1.123 Fix some not-in-practice bugs to do with log levels.
1.122 Update some comments.
1.121 Warns fixes.
SMP cases, and print separate messages for non-monotonic and negative
times).
Turned off the warning for zombie cases too.
Fixed some style bugs in the messages.
Only the warning about non-monotonic times is turned off. Unlike in
-current, these are only known to be caused by calling calcru() from
ttyinfo() for ^T processing (always if it is called for a zombie) so
turning off the warning is believed to only lose a cryptic warning
that the times printed for ^T are slightly out of date.
PR: 52490
This fixes races with schedcpu() and schedclock(). It corresponds to
sched locking before the sched_nice() call in -current. Lock assertions
made the races very obvious in -current.
Adjust the process's priority after calling resetpriority() as in
schedclock() to maintain the invariant that the current priority is
always _the_ process's user priority if it is a user priority. This
is to support uncommitted assertions that the priority is correct on
return to user mode. The priority is correct here (modulo bugs
elsewhere) but it needs to be set explicitly to satisfy the assertions.
processing -- EXCEPT that the default behavior is still to use the
"oldorder" processing. This allows people on 4.x-stable to try
out the "neworder" processing (either by `newsyslog -D neworder',
or by adding '<debug> neworder' to newsyslog.conf).
I plan to change the default to neworder in a week or two, and then
will remove all the oldorder code after a few more weeks.
PR: parts of this came from bin/25070 by Helge Oldach
debugging option via the newsyslog.conf file. Add a routine to change
file-attributes (chown, chmod, chflags), instead of having several
places doing the same sequence of system-calls. A few cosmetic/style
changes. These should not effect any users.
If specified, the matching log files will have the NODUMP flag set on
them after they are created.
[* = 1.87 newsyslog.c, 1.2 newsyslog.conf.5]
Submitted by: Sean Eric Fagan
routine that had been written some months ago for other processing.
This should get rid of a few subtle situations where an existing log
file would not exist (for a short time) while it is being rotated.
First release of ixgb driver for the Intel(R) PRO/10GbE Family of Adapters. This driver has
been developed for use with FreeBSD, version 4.8 and later.
Submitted by: Hema Joyce
Reviewed by: Prafulla Deuskar
Approved by: Prafulla Deuskar
sendfile(2)-related statistics that can be viewed through netstat -m:
- The number of times sendfile() had to do disk I/O
- The number of times sfbuf allocation failed
- The number of times sfbuf allocation had to wait
and three sysctl's: kern.ipc.nsfbufs, kern.ipc.nsfbufspeak,
kern.ipc.nsfbufsused that also can be viewed through netstat -m.
Submitted by: Igor Sysoev <is (at) rambler-co.ru>
the res_target structure. It was not a problem for now. But,
It should be fixed for a future.
PR: bin/67994
Submitted by: JINMEI Tatuya <[email protected]>
Fix the ordering in the description of the dlsym() lookup procedure to
reflect src/libexec/rtld-elf/rtld.c rev. 1.68 - the globally-loaded
objects (RTLD_GLOBAL) are searched before the local object's DAG's.
Bring the description for login_getclassbyname in sync with the function's
arguments. The function has as a second argument a struct passwd * pointer,
not a directory name.
driver tries to submit the same request repeatedly, on finding the
controller cmd queue to be full. This is an MFC from -CURRENT, and
is being done a bit fast because it addresses a 4.10 errata item, and
has already been tested for a week on a heavily used -STABLE machine
that was previously showing symptoms of the problem.
Submitted by:ps, vkashyap
Reviewed by:re
Approved by:re
the same as `ps -tpt', instead of being changed into `ps -tpT'. Also adjust
it so `ps t p0' is treated like `ps -t p0', instead of making it `ps -T p0'.
This includes the rewrite of the kludge-option processing, but it does NOT
remove the long-undocumented BACKWARD_COMPATIBILITY compile-time option.
If you delete the '#define BACKWARD_COMPATIBILITY' line, you'll get the
newer handling for "extra arguments", which is to treat them as requests
for processes.
Also brings in a number of style(9) improvements.
[* = 1.90 & 1.92 -> 1.98 ps.c]
PR: bin/52489 (for `ps tpt' and `ps t p0')
Submitted by: Jilles Tjoelker ( " )
- Remove entry which tells about periodical INDEX updates in
the CVS repository
- Add description for fetchindex target
Requested by: ru [1]
Approved by: josef (mentor)
pmap_prefault_pageorder array. This has two effects:
1. The resulting bogus contents of the array thwarts part of the
optimization effect pmap_prefault() is supposed to have.
2. The resulting array is only 7 elements long (auto-sized), while
pmap_prefault() expects it to be the intended 8 elements. So this
function in fact accesses memory beyond the end of the array.
Fortunately though, if the data at this location is out of bounds it
will be ignored.
This bug dates back more than 6 years. It has been introduced in
revision 1.178.
Submitted by: Uwe Doering <[email protected]>
PR: 67460
to handle that case better by adding any CPUs that appear to be logical
CPUs to the logical_cpus_mask bitmask. -CURRENT uses different code for
enumerating CPUs, so this is not an MFC.
Submitted by: Bruce Walker bmw at mxtreme dot com
1.126 Remove the requirement that the "discard" service be defined.
1.125 request_init pairs terminated by a 0 key.
1.124 Warn if inetd's config file doesn't exist.
1.123 Rename 'int log' to avoid shadowing.
the point the release goes out so we're adding it now to RELENG_4
and then will MFS it. This will probably be backed out so the entries
are empty in RELENG_4 some time after the 4.10 release.
Reviewed by: bmah
of msync( ...,MS_INVALIDATE) on NFS-mounted partitions. Given this
is a stable branch and the issue being addressed to begin with may
not concern some users we are providing a way to get the old behavior
if desired. The default will be to have the new behavior which is to
only flush pages from memory if they are not dirty. By changing the
sysctl vm.old_msync users can get the old behavior back. Because of the
unified VM/buffer-cache system what to do as a proper fix to this
issue is proving to be quite difficult. It is still being worked on
but we need this stop-gap solution for now.
Use the Generic 9005 mask when looking for generic 7901B
parts. This allows the driver to attach to 7901B parts
on motherboards using a non-Adaptec subvendor ID.
This also supports a recent Dell OEM part.
Submitted by: gibbs
1) only have a long timeout for the wi_cmd_ini command. All others should
much faster at 10ms. Some cards seem to timeout when the signal quality
is low, and a faster timeout means that retry will happen in a fraction of
a second, rather than seconds.
2) ifconfig passes -1 in i_val for the ssid and ignores the rest of the
parameters if it returns an error. wi used to return an error in this
case, which means none of the 802.11 parameters were being reported.
Since an works, fix the presumed bug in wi.
avoid writing a null character 1 byte past the end of cmdline[] when
libedit is being used for input, and avoid writing a null pointer 1
element past the end of margv[].
date: 2004/03/23 08:37:34; author: tjr; state: Exp; lines: +2 -1
Do not copy vm_exitingcnt to the new vmspace in vmspace_exec().
Copying it led to impossibly high values in the new vmspace,
causing it to never drop to 0 and be freed.
Requested/tested by: ps
Reviewed by: alc
MFS: immediately
status block. This makes the bge devices work much better when
interrupts are shared.
This change entails bringing in the atomic_readandclear_* functions
from -current. RELENG_4 already had the equivalent loadandclear
function for the i386, but it did not exist for the alpha.
compat packages are being removed because of security issues, they
are no longer buildable. The other packages being removed are due
to space issues, they don't fit. Packages chosen for removal were
either thought to be less popular with the majority of people, or
were large *and* you need a network connection to be able to use them
so downloading them post-install should be possible.
This will be merged into RELENG_4_10 immediately but note that a commit
to HEAD has not and will not be done for this now. -current package
sets are smaller (.tbz versus .tgz) so the package sets are at least
somewhat disjoint. And it's pointless to update this in HEAD until
a 5.X release comes.
Makefile to build the ISO's. Previous 4.X releases had a non-generic name
for the labels but were put together 'manually' instead of using the Makefile.
This will be insta-MFC'ed...
Fix a couple of camcontrol issues that popped up on sparc64:
- bzero the CCB header in getdevtree() and set the path properly, to
avoid having random garbage in the CCB header.
- if the lun isn't specified in a device specifier, it should default to
0, not whatever random data happens to be in the lun variable.
- move the prototype for getdevtree() out from under #ifndef MINIMALISTIC,
since it is used in both cases.
Approved by: ken (maintainer), marcel (mentor)
with mmap(2) where pages marked as PROT_NONE may become readable under
certain circumstances.
The commits to -current being MFC-ed with this are:
Revision Changes Path
1.333 +5 -4 src/sys/vm/vm_map.c
1.109 +1 -1 src/sys/vm/vm_map.h
Which were a result of a PR:
Submitted by: "Mark W. Krentel" <[email protected]>
PR: kern/64573
Reviewed by: alc
socket address length check fails. This is similar to the fix in
revision 1.99, except this version of the fix does not move the sanity
checks out from under the spl.
Submitted by: pjd
Pointy hat to: truckman
Being so close to the code freeze I went for the easy fix -- just remove
the bug -- rather than playing with convoluted casts to produce a
stylistically correct piece of code. This and whitespace can be
fixed after 4.10 by those interested.
Approved by: re
revision 1.74
date: 2003/01/30 15:00:17; author: phk; state: Exp; lines: +4 -0
Catch some cases where asking for ridiculously large allocations could
result in a segfault. Instead just return NULL.
Requested by: JINMEI Tatuya <jinmei (at) isl.rdc.toshiba.co.jp> and so@
Reviewed by: phk (but he's not responsible if this makes 4.10 go boom :-)
Approved by: re (scottl)
o split a sentence to make it more understandable
o mention that the acctfile has to exist for accton to work
o add reference to acct.5
Approved by: re (kensmith)
GNOME 2.6 and KDE 3.2.1.
MFC:
umct(4) driver added, and SIZE attribute in distinfo.
Update release note:
Use &man.twa.4;, and
usb(4) has early support for some USB2 devices[*].
Suggested by: julian[*]
Approved by: re (implicitly)
Diff reduction on several ethernet adapter drivers (name chenges etc)
MFC a Bill Paul Copyright notice.
Add several device IDs.
Reset a uhci controller the same way we do in -current
remove an un-needed include file
add code to probe a Clie 3 series
Approved by: re (scottl@)
A malicious CVS server could cause your CVS client to overwrite
arbitrary files (CAN-2004-0180).
When a CVS client uses the `-p' checkout option, the server could be
fooled into checking out files from outside the given $CVSROOT.
Submitted by: Derek Robert Price <[email protected]>
Approved by: re
Add 'umct', a driver for MCT Corp. and Belkin F5U109 USB-Serial
adapters. This is based on the ubsa driver by Alexander Kabaev along
with documentation gleaned from the Linux mct_u232 driver. I've had
this driver sitting in my tree for almost 6 months, and several others
have found it useful.
I've been using this with success on my RELENG_4 USB macines. MFC of
umct.4 to follow.
Approved by: re (scottl)
nge(4) VLAN support bugfix,
rl(4) polling support bugfix,
ste(4) polling support,
twa driver,
ps(1) supports more POSIX/SUSv3 compatible options, and
OpenSSL 0.9.7c -> 0.9.7d.
Update release note:
usb(4) initial support of EHCI and umodem(4) now uses /dev/ucom*.
Approved by: re (implicitly)
we convert ip_len into a network byte order; in_delayed_cksum() still
expects it in host byte order.
The symtom was the ``in_cksum_skip: out of data by %d'' complaints
from the kernel.
To add to the previous commit log. These fixes make tcpdump(1) happy
by not complaining about UDP/TCP checksum being bad for looped back
IP multicast when multicast router is deactivated.
Reported by: Vsevolod Lobko
1. Remove hyphen between prodoct and company name for Cronyx Sigma (cx (4)).
2. Add list of models for Cronyx Sigma.
3. Add Cronyx Tau (ctau(4)) entry.
when `ps' is compiled with LAZY_PS, so that there is only one PS_ARGS
string to modify when changing the option-list. Also get `-f' to show
up in the usage() statement when compiled with LAZY_PS. Also move the
'f' case in the select statement, so it in alphabetical order.
[* = 1.68 1.69 & 1.86 ps.c]
Approved by: re(scottl)
- Change `-p' to allow a list of process IDs, and `-t' to allow a list
of terminal names, instead of only a single value for each.
- Add the `-A' option of SUSv3, which is exactly the same as `-ax'.
- Add the `-G gidlist' (group id).
- Allow any of these "selector options" to be specified multiple times,
and have `ps' keep adding to a given list -- instead of replacing the
previously-specified values.
- Fix interactions between selector-options, so that: "If any are
specified, ... ps shall select the processes represented by the
inclusive OR of all the selection-criteria options." (from SUSv3)
- Add a `-X' option, which is the reverse of the `-x' option.
- various minor improvements in parsing and error handling.
This should result in no user-visible changes, except for adding the
new features. The man page is updated to describe the new features,
and to describe the sorting options in better and more complete detail.
[* = 1.67 1.72 1.76->1.79 1.84 & 1.85 ps.c, 1.71->1.74 ps.1]
Approved by: re(scottl)
resulted in panics if large numbers of events were created with short
timeouts.
This hasn't been fixed in -CURRENT yet; 5.x has a more serious race
condition which I need to fix first.
PR: kern/64121
Submitted by: Gerrit Nagelhout
Don't reject FAT file systems with a number of "Heads" greater than
255; USB keychains exist that use 256 as the number of heads. This
check has also been removed in Darwin (along with most of the other
head/sector sanity checks).
ttyz?)
2. Remove old control device /dev/cronyx in favour of /dev/cx? (it is safe to
do it befor rm cxconfig, cause it is not linked to system build process.)
Approved by: imp (mentor)
Problem:
When an NFS server is port-scanned nfsd sometimes exits. This has
happened 3 times the last few weeks.
Nfsd has been written to exit when accept(2) fails. Unfortunately
accept can sometimes make a "normal" return with errno ECONNABORTED
and in this case nfsd exits prematurely.
Solution:
Check for ECONNABORTED (and also EINTR, since nfsd uses signals)
and continue.
Submitted by: Bjoern Groenvall <[email protected]>
PR: 61084
Reminded by: Lewis Thompson <[email protected]>
After examining the remaining diffs after MFCing,
I've decided that -current has this right and 4.x has this wrong..
Set the buffer end address as startpage + offset + buflen
instead of startpage + buflen
After all, the buffer START is startpage + offset
* all
- s/__FUNCTION__/__func__/.
- Compatibility for RELENG_4 and DragonFly.
* firewire
- Fix kldload failure
- Add a PCI ID of NEC uPD72873.
- Fix a bug reported misc/64623.
- Timestamp just before queuing.
- Retry bus probe if it fails.
- Use device_printf() for debug message.
- Invalidiate CROM while update.
- Don't process minimum/invalid CROM.
* sbp
- Add ORB_SHORTAGE flag.
- Add sbp.tags tunable.
- Revive doorbell support. It's not enabled by default.
ut_time. Wtmp records with time==0 get "the time of the last valid
record", while records where time goes backwards (compared to the
previous record) are skipped. Also prints a message saying how many
records were changed or skipped due to these checks. This check was
inspired by a simpler check in OpenBSD's version.
debug-statements so the program compiles without errors or warnings
when DEBUG is defined on sparc64 with 64-bit time_t's (in -current).
Also have debug statements include the year when printing records
from a different year than 'now'. Also print out a special
timestamp in debug statements when ut_time==0.
for <x> being a comma-separated list of processes, and does a much
better checking for invalid-values of <x>, such as 'ps -p someword'.
[* = 1.65 ps.c, 1.67 ps.1]
(kern.bootp_cookie) in the list of paths used for diskless templates.
When foo.cpio.gz archives are present, do not copy the content from a
foo/ directory even if present. This restores the previous behaviour,
and is also important from the point of view of efficiency (saving
many RPCs to copy the individual files), which was the whole point for
introducing the cpio archive.
(these files are not anymore in -current but equivalent functionality
will be implemented there, and the maintainer has been already informed).
disk images). The change actually boils down to little more than
providing the equivalent of a 'virgin' label for the file, all
the remaining label manipulation being the same.
This saves the need for going through vn/mdconfig (and root privs)
just to label an image file.
RELENG_4 only commit because disklabel is not in RELENG_5/CURRENT anymore,
though I suspect a similar change could be applied to bsdlabel and friends.
mainly to greatly reduce the code-diffs in ps.c (but that dragged
in some similar changes to the other files). This should result
in no user-visible changes. This is done to make it easier to MFC
some user-visible changes that are coming up, but those MFC's will
be done at a later date.
speedup stream socket recv handling by tracking the tail of the
mbuf chain instead of walking the list for each append. This has
been pretty well tested at Yahoo!
Obtained from: netbsd (jason thorpe)
Reviewed by: silby
a prequisite of the vm_map.c rev 1.280 that dillon prematurely MFC'ed
on Jan 13th, 2003. Without this change, the kernel leaks vmspaces
to varying degrees depending on the circumstances. Specifically,
vm_exitingcnt was being copied from the parent to the child when it
might have been non-zero. This caused the child's vm_exitingcnt to
never hit zero. This was blowing up machines at work.
as this is more appropriate for modern disks.
Also, remove a duplicate variable assignment.
PR: kern/63839
Submitted by: Dmitry Morozovsky <[email protected]>
Approved by: grog (mentor)
Have edquota honour MAXLOGNAME rather than hardcoding the maximum
username length to 29 characters.
PR: misc/62944
Submitted by: David Hill <[email protected]>
Approved by: ru
0xFFFFFFFF, it means that the correct value is unknown. Since this value
is just a hint to improve performance, initially assume that the first
non-reserved cluster is free, then correct this assumption if necessary
before writing the FSInfo block back to disk.
PR: 62826
USB code. This will allow teh addition of USB-2 support to 4.10 and
simplify debugging as they had diverged too much.
Submitted by: [email protected]
Obtained from: NeBSD via -current
- New API functions for libnetgraph.
- Get rid of static buffers where possible.
- Fixed memory leak in NgSendAsciiMsg().
- WARNS fixes for ngctl(8).
- mdoc(7) cleanup for netgraph(3).
- Reduced gratuitous diffs to the trunk.
tcp6_usr_bind(), tcp_usr_connect(), and tcp6_usr_connect()
before checking whether the address is multicast so that the
proper errno value will be returned if sa_len is incorrect.
argument to avoid writing past the end of a dynamically
allocated buffer, even though the minimum allocation size
prevents an actual buffer overflow from occuring without
this check.
- deny attempts to delete or rename a file
if a guest user isn't allowed to modify files on the server;
- disallow downloading raw directory contents by real users
in order to work around buggy GUI clients which think that
trying to download a directory is a fair way to tell it
from a regular file;
- "(char *)0" --> "NULL" where possible.
getnetbyname fixes:
Do not choke on malformed network addresses.
Return n_name in static space, not on the function's stack.
Tinderbox fixes by: Ruslan Ermilov
* firewire
- Remove pending list.
- Ignore timeout for the FWXF_START state.
- Define M_FWMEM for debugging.
- Comment out DELAY() in fw_asybusy().
- Improve debugging messages.
- Fix register mis-alignment introduced in rev1.12.
- Add missing free() in exception handlers.
- Add tcode_str[] and improve debug message.
* sbp
- Freeze simq while bus reset.
- If max_speed is negative, use the maximum speed which the
ohci chip supports. The default max_speed is -1.
* sbp_targ.c
- Add speed in struct sbp_targ_login.
- Remove unnecessary htonl().
* if_fwe
- If tx_speed is negative, use the maximum speed which the
ohci chip supports. The default tx_speed is 2.
* all
- Remove __P().
When not creating a core dump due to resource limits specifying
a maximum dump size of 0, return a size-related error, rather
than returning success. Otherwise, waitpid() will incorrectly
return a status indicating that a core dump was created. Note
that the specific error doesn't actually matter, since it's lost.
MFC after: 2 weeks
PR: 60367
Submitted by: Valentin Nechayev <[email protected]>
This allows a 4.x cp binary to work correctly on 5.x kernels (for which
munmap() of a 0-length mapping returns an error).
Noticed by: bento's 4.x package build
ac97.c: 1.49: Add ID for ALC658 CODEC.
ac97.c: 1.48: Recognize the Avance Logic ALC655 codec found on some
ICH4/5-based motherboards, such as the Gigabyte I848P.
ac97.c: 1.46: Add Creative EV1938.
ac97.c: 1.45: When present use ogain instead of master for surround sound
channels.
ac97.c: 1.44: Additional VT1616 id.
ac97.c: 1.43: Apply Rudolf Cejka's patch for AD1980 hook & ac97_fix_auxout.
Associate AC97_MIX_AUXOUT with SOUND_MIXER_OGAIN rather than
SOUND_MIXER_MONITOR.
Add ac97_fix_tone to remove tone controls from mixer if invalid
ac97.h: 1.14: Apply Rudolf Cejka's patch for AD1980 hook & ac97_fix_auxout.
Associate AC97_MIX_AUXOUT with SOUND_MIXER_OGAIN rather than
SOUND_MIXER_MONITOR.
Add ac97_fix_tone to remove tone controls from mixer if invalid
ac97_patch.c: 1.2: Add patch for AD198x.
ac97_patch.h: 1.2: Add patch for AD198x.
Approved by: matk
gethostbyname2() is able to lookup AF_INET6.
PR: 23823
Noticed by: Andrew Arensburger <[email protected]>
This was mentioned again in:
PR: docs/59669
Submitted by: Volker Stolz <[email protected]>
(not so in HEAD). If you want to build/install RELENG_4 on HEAD, you
have to set MAKEDEVPATH to include /usr/bin (at least as long HEAD's
/bin/sh has no printf builtin).
Explained by: bde
date: 2003/05/16 01:13:16; author: rwatson; state: Exp; lines: +5 -1
Add a tunable/sysctl "hw.fxp_noflow" which disables flow control support
on if_fxp cards. When flow control is enabled, if the operating system
doesn't acknowledge the packet buffer filling, the card will begin to
generate ethernet quench packets, but appears to get into a feedback
loop of some sort, hosing local switches. This is a temporary workaround
for 5.1: the ability to configure flow control should probably be
exposed by some or another management interface on ethernet link layer
devices.
Requested by: Pawel Malachowski <[email protected]>
need to set np->n_size back to the desired size again after calling
nfs_meta_setsize(), since it could end up in nfs_loadattrcache() getting
called, which would change n_size back to the value it had before the
truncate request was issued. The result of this bug is that the size info
cached in the nfsnode becomes incorrect, lseek(fd, ofs, SEEK_END) seeks
past the end of the file, stat() returns the wrong size, etc.
PR: 41792
- Add support for SMB signing, which is required to connect to
Windows 2003 servers.
- Add support for mixed-case passwords.
- Add support for large (up to 64K) READ_ANDX/WRITE_ANDX requests.
- Increase TCP send/receive queue size to support these large requests.
- Receive packets in small pieces so TCP slowstart will get ACKs faster.
- Fix off-by-one bug preventing access to servers with NetBIOS names
exactly 15 characters long.
- Allow the [, ], and = characters in non-8.3 filenames.
- Only close files on the server when there are no more references to
the vnode; makes mmap()'d regions work properly after the local
file descriptor has been closed.
- Fix mishandling of files >4GB.
- Diff reduction to make future merges easier.
PR: 36038 46902 57123
it is marked as RTF_UP. This fixes a panic when an interface
is detached (ie. suspend/resume).
Not objected by: sam, iedowse
Fix in -current by: iedowse
- Titan VScom PCI-800L
- Oxford Semiconductor OX12PCI840
- Moxa Technologies, Smartio C104H/PCI
- Moxa Technologies, Smartio CP-104UL/PCI
- IC Book Labs Ironclad x8 Lite
- IC Book Labs Ironclad x8 Pro
This was prompted by the PR which included a patch for 4.x for the Titan
800L.
PR: kern/41555
Reported by: François Laissus <[email protected]>
1) Don't recurse on errors.
2) Remove unused printf argument.
3) Use skip_message for program and hostname matching (which allows multiple
comma-seperated names to be given).
(aka prescription flu medicine containing lots of hydrocodone) might not have
been one of my better ideas. Fix typo noticed by Nate Lawson. The other
files look OK.
I missed these from the MFC and caused the dysfunction reported on -stable,
I just didn't catch it due to lack of personal locale-use. Yes, when you
change an internal function it is also necessary to change the functions
which *call* it or bad things happen. Yes, I should have caught this myself.
I'm a little rusty in -stable, sorry. Won't happen again. :(
</big sigh>
broken and list the type of the pin as INT rather than ExtINT in the MP
Table. To workaround, force pin 0 of ioapic 0 to be ExtINT if it is of
type INT. This is not a MFC as -current has very different apic code now.
Current's mptable parser might need a similar workaround.
PR: i386/39234
Reported by: Henri Hennebert <[email protected]>
pannels, or 32 ports for the ech boards. The only possible way to
make an error is to have 8 + 8 + 8 + 16 or 8 + 16 + 16, so we detect
that more directly and cleanup properly (eg, ignore the last panel).
This was the intent of the too many ports attached to board message
before, and should be more robust.
# now, too port this to current.
than at the end where it suffered from a fencepost error.
However, I'm not entirely sure that it is still correct because it
looks like we access something in the ioaddr2 range. I need more
stallion pannels to know for sure. The code is less incorrect than it
was before at least when you have two pannels connected to the
EC8/32-AT. Two pannels are allowed and appear to work. Stallion says
that 3 cannot work, or when the agregate number of ports is > 32. I
think that these tests should be more explicit, but until I have more
hardware, this is less wrong.
Fir another mis-merge in ciss_cam_action_io when getting an error back
from ciss_start, only REQUEUE the request if the error is not EINPROGRESS
Pointy hat to: me
Remove extraneous semicolons. They are already provided by
the macro definition, and cause the generation of syntactically
incorrect code that gcc happens to accept.
Fix problem where initgroups would silently truncate groups
with more than NGROUP elements without providing the opportunity to
setgroups to fail and correctly retorn an error and set errno.
site). This only updates the stallion (stl) driver. The stli driver
isn't updated because the driver is corrupt on the stallion web site
:-(.
This fixes my EC8/32-AT card, which worked with the 1.0.0 driver, but
not the 2.0.0 driver. It also fails to break my EasyIO-8 PCI card
(well, I can't completely test it just yet).
This is being committed directly to stable because this driver doesn't
compile in current. I'm doing a current port, but it will commit that
later. Also, 2.0.0 hasn't made it into current either.
Add support for the AMD 8111
Fix support for the nForce (so it actually does something).
Add support for the nForc2 and nForce3.
Ideas from -current but different impl.
Sponsored by: Yahoo!
very well across buckets, especially in the case of cylinder group blocks
which are located at a sequence of locations that are a multiple of a large
power of two apart. In the case of large file systems, one or possibly
a few of the hash chains can get excessively long. Replace the existing
hash algorithm with a variation on the Fibonacci hash.
Tested by: Ken Marx <[email protected]>
Attempt to save the last dregs of emacs users' sanity by saving the
contents of the PR when an interrupt is received during the editor
session. This stops the use of ^G from deleting a filled PR from
underneath the user.
PR: bin/59201
Submitted by: Heikki Suonsivu <[email protected]>
to sendfile(2) being erroneously automatically restarted after a signal
is delivered. Fixed by converting ERESTART to EINTR prior to exiting.
Updated manual page to indicate the potential EINTR error, its cause
and consequences.
Add the following devices to the list of supported devices, to sync
manual page with the source code:
- HAL Corporation Crossam2+USB IR commander
- RATOC REX-USB60
- SOURCENEXT KeikaiDenwa 8 (with and without charger)
truncated. In environments where many tunnel or vlan interfaces are created,
interface names have high numbers which overflow the field width.
PRs: bin/52349, bin/35838
Submitted by: Mike Tancsa, Scot W. Hetzel
time during the boot process. This is needed in the case where NFS mounts
from servers reachable only via IPSEC are in /etc/fstab.
PR: conf/42497
Submitted by: Volker Stolz
compatibility, and marked the old value and RB_PROBEKBD as reserved
for internal use in boot blocks. Also unintentionally clobber a style
fix in 1.22).
The corresponding change to boot/boot2.c has not been not merged, since
RELENG_4's boot2 doesn't actually support RB_PAUSE (or even the 7 year
old flag RB_MUTE), so any plain merge would just add an incomplete set
of comments to code that should be rewritten so that it doesn't need
the comments. RELENG_4's boot/loader does support these flags, and
it doesn't need changing since it doesn't hard-code copies of them.
Add vendor ID to make Marvell chipset work. E.g. to be found
on SMC9452TX it seems
Submitted by: Jung-uk Kim <[email protected]>
Tested by: <Radu Bogdan 'veedee' Rusu> [email protected]
- Code cleanup
- In the receive routine handle the case where last descriptor could have
less than 4 bytes of data.
- Handle race between detach/ioctl routine.
- Add facilities for tuning "em" drivers interrupt delays without recompiling
the driver. These changes were done by John Polstra.
Submitted by: jdp (sysctl's for interrupt delay tuning)
- Detach black hole device on AC_PATH_DEREGISTERED.
- Pick up a correct path_id for the bus on AC_PATH_REGISTERED.
- Call cam_periph_invalidate() only if the periph is found.
This closes a local DOS whereby a user can put a process in an
uninterruptible sleep by calling rfork(RFNOWAIT|RFPPWAIT|RFPROC).
Reported by: Igor Serikov <[email protected]>
buildworld as src/etc/sendmail/freebsd.mc is missing. That example
was added 3 years ago, before the /etc/mail/ infrastructure was in
place for customized configurations. It is time to remove this example.
Revision Changes Path
1.11 +0 -1 src/share/examples/cvsup/refuse
1.10 +4 -6 src/share/examples/cvsup/refuse.README
directory. Otherwise a 2nd, 3rd etc. thread might end up using garbage
for address translation.
MFC (partial) rev 1.43[67]: Don't zero fill existing page table.
mention problems with machines that don't support emulation-booting
CDROMs.
While here, add date-stamps for errata items. A couple of people
asked for this and it seemed useful and easy to do.
and restructure them. This is mainly to fix up the "will trim at"
messages printed when running 'newsyslog -v'.
[* = 1.1->1.2 extern.h, 1.81->1.82 newsyslog.c, 1.1->1.4 ptimes.c,
1.15 Makefile]
the number of broken DNS servers out there in the world. Since we are
diverging from the sendmail.org submit.mc, it's time to make our own
freebsd.submit.mc.
- Update the page title to include information about which cards
are supported by the driver.
- Use a list to specify which cards are supported.
- Add the 3c592/3c597 EISA cards to the list of supported cards.
- Add the Dell PERC 4/Di to the list of supported devices; it
has been supported for the last 10 months.
- Make the device list compact, since it is getting rather large.
Don't read the MAC address from a copy of the EEPROM in the softc
that has been recorded earlier and overwrite it again later by
reading it directly from the EEPROM again.
Read the MAC address from the PAR0/PAR1 registers instead, which
are autoloaded on reboot.
ls: cvs-serv28978/cvs-serv28978/arpa/cvs-serv28978/assert/cvs-serv28978/bare/cvs-serv28978/conf/cvs-serv28978/crypt/cvs-serv28978/csu/cvs-serv28978/ctype/cvs-serv28978/dirent/cvs-serv28978/elf/cvs-serv28978/gnu/cvs-serv28978/gnulib/cvs-serv28978/grp/cvs-serv28978/hurd/cvs-serv28978/hurd/hurd/cvs-serv28978/inet/cvs-serv28978/inet/arpa/cvs-serv28978/inet/netinet[...]/cvs-serv28978/posix/cvs-serv28978/posix/glob/cvs-serv28978/posix/gnu/cvs-serv28978/posix/sys/cvs-serv28978/protocols/cvs-serv28978/pwd/cvs-serv28978/resolv/cvs-serv28978/resolv/arpa/cvs-serv28978/resolv/sys/cvs-serv28978/resource/cvs-serv28978/resource/sys/cvs-serv28978/rpc/cvs-serv28978/setjmp/cvs-serv28978/signal/cvs-serv28978/signal/sys/cvs-serv28978/socket/cvs-serv28978/socket: File name too long
File diff suppressed because it is too large.
Load diff
Loaded 100 of 2505 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Devin Teske