The netlink rhashtable key includes a raw struct net pointer and a
user-controlled port ID. Both /proc/net/netlink and socket diagnostics
expose the table's bucket order. By binding and rebinding chosen
NETLINK_USERSOCK port IDs, an unprivileged reader can distinguish equal
buckets and recover the low bits of the Jenkins hash. Its 32-bit seed
and the limited set of kernel-image slides can then be searched offline
to recover the address of init_net.
Use the namespace's unique, non-address net_cookie in the comparison
key instead. It is assigned before the per-net initializers run and
remains unchanged for the namespace's lifetime. The lookup key and
object hash are still built by netlink_compare_arg_init(), keeping
lookup, insertion, removal and rehashing consistent while preserving
namespace separation. Neither public table walker needs to change.
Reading the socket's namespace cookie in netlink_compare() is safe
under RCU, including during namespace teardown. netlink_release()
removes the socket from the hash table and defers its final put with
call_rcu(). cleanup_net() runs the per-net exit methods and waits for
outstanding RCU callbacks with rcu_barrier() before freeing namespace
storage.
Unlike ns.ns_id, net_cookie is also available and initialized during
setup_net() in older stable kernels, making the change straightforward
to backport to v5.15 and later.
Fixes: c428ecd1a2 ("netlink: Move namespace into hash key")
Assisted-by: LLM
Signed-off-by: Kyle Zeng <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Alexandre Cassen says:
====================
net/mlx5: HWS, fix reformat release and meter offset
This series fixes two issues in fs_hws found while offloading one tc
rule with its own encap and meter:
- Releases L2 to L3 tunnel reformats to the pool they come from.
- Makes a rule select its flow meter within the whole ASO bulk.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
The flow meter action is bound to the first ASO object of the bulk but
the rule offset only indexes the meter within its own object. A rule
past the first object runs on the wrong meter.
Fixes: 82d3639ef7 ("net/mlx5: fs, add support for flow meters HWS action")
Signed-off-by: Alexandre Cassen <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Acked-by: Tariq Toukan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to
an skb's network and MAC headers. Netlink producers may reserve
headroom without resetting those headers, allowing a receiving socket's
filter to read data before the initialized message.
For example, IWPM HELLO replies are allocated with dev_alloc_skb(),
which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can
attach a classic socket filter and disclose this headroom through the
length of the delivered reply. The resets in netlink_dump() do not help
because IWPM sends a separately allocated skb through netlink_unicast().
Reset both headers before running the receiver's filter in unicast and
broadcast delivery, as is already done for dump skbs. This also covers
other netlink producers that reserve headroom without changing their
allocation or message-building code.
Fixes: b1153f29ee ("netlink: make socket filters work on netlink")
Assisted-by: LLM
Signed-off-by: Kyle Zeng <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
When message interleaving is enabled, the first send waits for association
establishment before building its data chunks. The wait drops the socket
lock, and handshake processing can reduce the output stream count to the
peer-advertised inbound stream count. sctp_stream_init() then frees the
extension of every removed stream.
The sender resumes with the stream that it checked before the wait. If the
peer removed that stream, sctp_outq_tail() later dereferences its NULL
extension. Fatal-oops policies then panic the host.
KASAN: null-ptr-deref in range [0x38-0x3f]
RIP: sctp_outq_tail+0x49e/0xaa0
Call Trace:
sctp_primitive_SEND
sctp_sendmsg_to_asoc
sctp_sendmsg
A range check alone is insufficient. Stream reconfiguration can grow the
output count again while the lock is released without recreating extensions
freed by the earlier shrink. The stream can then be in range while its
extension remains NULL. The send-buffer wait has the same issue.
Factor the range and extension checks into a helper and repeat both after
each send-path wait that drops the socket lock. Once the lock is
reacquired, the validation remains stable through data creation and
queueing.
If validation fails after the connect wait, the auto-created association is
already established. Return ESRCH so the existing caller path keeps it
under state-machine ownership instead of freeing it directly, which would
leave protocol, counter and socket state inconsistent.
Fixes: 668c9beb90 ("sctp: implement assign_number for sctp_stream_interleave")
Cc: [email protected]
Assisted-by: LLM
Signed-off-by: Daehyeon Ko <[email protected]>
Acked-by: Xin Long <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Allison Henderson says:
====================
net/rds: RDMA-CM event handler fixes for non-IB devices
This is v4 of Aohan Mei's fix for the uninitialized transport pointer
in the RDMA-CM event handler (v1 at [1], v2 at [2], v3 at [3]), now a
two-patch set.
Patch 1 is the fix itself. v3 only rejected a connect request
arriving on a non-IB device; the active side can bind an id to one
as well, and resolving a route on an iWARP id leaves
cm_id->route.path_rec unset, which the ROUTE_RESOLVED case
dereferences. Such a connection is now dropped at ADDR_RESOLVED
instead of resolving a route.
Patch 2 fixes a neighbouring problem in the same case: a synchronous
rdma_resolve_route() failure was handed back to the rdma_cm, which
then destroyed an id RDS still owns as ic->i_cm_id and would later
disconnect and destroy again from the connection's shutdown.
On net-next the rdma_cm ids RDS creates are restricted to IB devices
(commit c7fca8aae6fe), which makes the non-IB cases impossible there;
these are the fixes stable kernels without that API need.
[1] https://lore.kernel.org/netdev/[email protected]/
[2] https://lore.kernel.org/netdev/[email protected]/
[3] https://lore.kernel.org/netdev/[email protected]/
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
rds_rdma_cm_event_handler_cmn() hands the return value of
rdma_resolve_route() straight back to the rdma_cm on
RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM
from the route work allocation, an SA query that cannot be set up, a
RoCE route with no usable device - makes addr_handler() destroy the
id the event was delivered on. That id is ic->i_cm_id, and nothing
clears the pointer: the connection sits in RDS_CONN_CONNECTING with a
freed id until its shutdown calls rdma_disconnect() and
rdma_destroy_id() on it.
The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect()
forces a zero return while ic->i_cm_id == cm_id, as the comment there
explains. Do the same here - drop the connection and return 0 - so
the id stays RDS's to destroy from the shutdown, and the reconnect
gets a fresh one.
Fixes: 55b7ed0b58 ("RDS: Common RDMA transport code")
Assisted-by: LLM
Signed-off-by: Allison Henderson <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA
device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device
type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but
the event switch dereferences it: unconditionally in the
RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(),
and (with a connection context) in the ROUTE_RESOLVED and
ESTABLISHED cases.
An RDS listener on an iWARP device therefore crashes the kernel as
soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO
the wild load becomes a NULL dereference at offset 0xa0
(&trans->cm_handle_connect) in the iw_cm_wq workqueue.
GCC masks the bug in default builds by folding the uninitialized
load into &rds_ib_transport; Clang-built kernels take the real
uninitialized path and oops.
The active side can land on a non-IB device too: the id that
rds_ib_conn_path_connect() creates is not restricted to a node type,
so rdma_resolve_addr() binds it to whichever device serves the local
address, and an iWARP RNIC on the same netdev qualifies. The crash
there is different: resolving a route on an iWARP id never fills in
cm_id->route.path_rec, and the ROUTE_RESOLVED case writes
path_rec[0].sl before it calls into the transport.
The iWARP transport was dropped long ago and IB is the only
transport left, so make that explicit: initialize trans to
&rds_ib_transport at declaration, drop the conditional assignment,
reject a connect request that arrives on a non-IB device, and drop a
connection whose address resolved to one instead of resolving a
route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST
on purpose: a non-zero return from the handler makes rdma_cm destroy
the id the event was delivered on, which is right for the request's
freshly created id but would free a connection id that RDS still owns
for any other event. On the active side the id stays ic->i_cm_id and
the connection's shutdown destroys it, so that case returns 0.
Fixes: dcdede0406 ("RDS: Drop stale iWARP RDMA transport")
Reported-by: TencentOS Corvus AI <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Link: https://lore.kernel.org/netdev/[email protected]/
Cc: [email protected]
Assisted-by: CodeBuddy:Kimi-K3
Signed-off-by: Aohan Mei <[email protected]>
[achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of
bailing out for every event on a non-IB device, so that rdma_cm does
not destroy connection ids RDS still tracks; drop a connection whose
address resolved to a non-IB device before a route is resolved on it;
changelog adjusted]
Assisted-by: LLM
Signed-off-by: Allison Henderson <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can
race with the connect loop. Immediately break and return 0 on
ESTABLISHED/CLOSING. The return value of connect() should reflect what
happened up to the point the connection was established or failed. Events
that occur afterwards must not affect it. E.g. even if OP_RW has already
set sk_err, connect() should still return 0, not ENOBUFS because of it.
Adapt the inaccurate comment above signal_pending().
Resetting a socket that is still present in connected_table can lead to
memory corruption. The reporter noted lost transports for in-flight skbs,
and I have reproduced crashes caused by re-insertion into connected_table.
list_add double add: new=, prev=, next=.
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:__list_add_valid_or_report+0x11f/0x130
Call Trace:
vsock_insert_connected.cold+0xe/0x13
virtio_transport_recv_pkt+0x10e9/0x1460
vsock_loopback_work+0x305/0x480
process_one_work+0xe4c/0x1560
worker_thread+0x4f1/0xd60
kthread+0x36e/0x470
ret_from_fork+0x47b/0x6b0
ret_from_fork_asm+0x1a/0x30
This fix is supplementary to commit 002541ef65 ("vsock: Ignore
signal/timeout on connect() if already established"). Details under Link.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reported-by: Hyunwoo Kim <[email protected]>
Link: https://lore.kernel.org/netdev/anzT1fREOSyHT99k@v4bel/
Signed-off-by: Michal Luczaj <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, wireguard, CAN and Bluetooth.
We have one known regression to wrap up in VLAN handling.
Current release - regressions:
- Bluetooth: RFCOMM: fix deadlock on rfcomm_mutex
Previous releases - regressions:
- can: fix regression in handling RPS after migrating metadata to skb_ext
- eth:
- iavf: fix regressions in reconfig impacting bonding
- mana: fix packet forwarding performance regression
- stmmac: remove buggy VLAN acceleration support
Previous releases - always broken:
- a few high prio fixes for tun, and af_packet
- amt: fix a UaF on tunnel teardown
- eth:
- bnxt: fix PCIe AER recovery and FLR handling issues
- macb: don't modify Tx skbs before taking ownership
- axienet: don't leak Tx skbs on interface stop
- wifi:
- nxpwifi: number of LLM-ish fixes
- assorted mt76 fixes"
* tag 'net-7.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (128 commits)
net: macb: copy shared skbs before appending the FCS
net: macb: check TX ring before modifying skb
vsock: Fix memory leak in vmci_transport_recv_dgram_cb()
wireguard: noise: reject response consumption after intermediate initiation
wireguard: queueing: preserve tstamp_type when encapsulating packet
net: openvswitch: validate transport header presence in set_ipv6_addr
net/smc: protect clcsock lifetime in smc_getname
ipv6: do not warn on route notification size race
ipv4: do not warn on route notification size race
ipv4: validate checksum_start before completing checksum
ptp: ocp: fix PCIe delay estimation calculation
xen/netfront: don't leak the skb when xennet_fill_frags() fails
net/packet: call packet_parse_headers after virtio_net_hdr_to_skb
xen/netfront: drop RX packets with a short Ethernet header
net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits()
net: sparx5: free the matchall entry on destroy
selftests: mlxsw: Test port range occupancy on template create
mlxsw: spectrum_flower: Fix port range register leak in tmplt_create()
net: dsa: microchip: fix KSZ8765 fiber detection
net/mlx5e: Order ICOSQ cc update after CQ doorbell
...
Nicolai Buchwitz says:
====================
net: macb: fix software FCS handling of shared and requeued skbs
While testing the genet MTU series I used a Raspberry Pi CM5 (RP1 GEM)
as pktgen source for the CM4. With clone_skb the CM5 rebooted after a
few seconds. Further investigation showed that macb_pad_and_fcs()
appends the FCS in place, so the shared skb grows with every transmit
until BQL completes more than was queued and dql_completed() hits its
BUG_ON.
The same code also modifies the skb before the TX ring check, so a
NETDEV_TX_BUSY retry gets an skb that was already replaced or grown.
Patch 1 checks the ring first, patch 2 copies shared skbs.
Tested on Raspberry CM5 with pktgen at 60/20000 bytes, clone_skb 0/
1000, burst 1/32.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
macb_pad_and_fcs() appends the FCS in place when the skb has tailroom.
A shared skb, as pktgen sends in clone_skb mode, grows by one FCS per
transmit. BQL then completes more bytes than were queued and
dql_completed() hits its BUG_ON.
On a Raspberry Pi CM5 (RP1 GEM) pktgen with clone_skb 1000 burst 32 at
60 bytes kills the box within seconds.
Copy shared skbs before appending the FCS. Clearing IFF_TX_SKB_SHARING
would also fix it but makes pktgen refuse clone_skb on macb.
Fixes: 653e92a917 ("net: macb: add support for padding and fcs computation")
Signed-off-by: Nicolai Buchwitz <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
macb_pad_and_fcs() replaces or extends the skb before the ring space
check. On NETDEV_TX_BUSY the stack requeues an skb that is already freed
or grown.
Check the ring first, using the padded length for the descriptor count.
Nonlinear skbs always take the copy path so the count can assume a
linear skb.
Fixes: 653e92a917 ("net: macb: add support for padding and fcs computation")
Signed-off-by: Nicolai Buchwitz <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
During the closure of a datagram socket, the vmci_transport_recv_dgram_cb()
function may be called, which will add the packets
to the socket's backlog; then, after the receive queue is cleared,
the __release_sock() function will move the packet back from the socket's
backlog to the receive queue, which will lead to a memory leak.
sock_close
__sock_release
__vsock_release
// take ownership by user-space
lock_sock_nested
sock_set_flag(sk, SOCK_DEAD)
vmci_transport_release
vmci_dispatch_dgs
vmci_datagram_invoke_guest_handler
vmci_transport_recv_dgram_cb
sk_receive_skb
if (!sock_owned_by_user(sk))
[...]
(!) else if sk_add_backlog()
[...]
(!) skb_queue_purge(&sk->sk_receive_queue)
release_sock
__release_sock
// move all packets from the backlog
// to the receive queue
(!) sk_backlog_rcv
vsock_queue_rcv_skb
[...]
__sock_queue_rcv_skb
if (!sock_flag(sk, SOCK_DEAD))
// Since the socket is "dead", the function will not
// be called
sk->sk_data_ready(sk)
sock_release_ownership(sk);
sock_put
Add a receive queue cleanup in the socket destructor to fix this.
syzkaller report:
unreferenced object 0xffff8880117bfb80 (size 240):
comm "irq/56-vmw_vmci", pid 205, jiffies 4295064448 (age 73.992s)
hex dump (first 32 bytes):
78 dc 26 1e 80 88 ff ff 78 dc 26 1e 80 88 ff ff x.&.....x.&.....
00 00 00 00 00 00 00 00 c0 da 26 1e 80 88 ff ff ..........&.....
backtrace:
[<ffffffff82be8d97>] __alloc_skb+0x287/0x330 net/core/skbuff.c:505
[<ffffffffa114bcbd>] vmci_transport_recv_dgram_cb+0xbd/0x210 [vmw_vsock_vmci_transport]
[<ffffffffa05072c6>] vmci_datagram_invoke_guest_handler+0x366/0x450 [vmw_vmci]
[<ffffffffa050ad75>] vmci_dispatch_dgs+0x235/0x490 [vmw_vmci]
[<ffffffffa050b025>] vmci_interrupt+0x55/0x290 [vmw_vmci]
[<ffffffff8137ad2b>] irq_thread_fn+0x8b/0x1a0 kernel/irq/manage.c:1205
[<ffffffff8137c7ae>] irq_thread+0x28e/0x530 kernel/irq/manage.c:1314
[<ffffffff81253dd6>] kthread+0x2e6/0x3a0 kernel/kthread.c:376
[<ffffffff81004392>] ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:295
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Ilia Gavrilov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Jason A. Donenfeld says:
====================
WireGuard fixes for 7.3-rc7
This series contains two important WireGuard fixes
1) Stop zeroing out skb->tstamp_type when encapsulating packets, so that
fq behaves correctly, from Ramses de Norre.
2) Make sure handshake state isn't swapped out while locks are
released, reported by Jérémy Jean.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Two threads begin processing the identical response message, received
twice. The first thread, A, runs. While it's running, the second one,
B, gets partway through, and during that slow calculation, or even while
blocking on down_write(), A completes and then also a handshake
initiation that's already been queued up runs in thread C, which itself
takes that same down_write(). The handshake initiation creation
succeeds, and sets the state back to waiting-for-response, and calls
up_write(), at which point thread B resumes, because either its finished
its calculations or was finally allowed to acquire down_write(). Thread
B then copies the state back to the peer, and begins a new session,
using that state, which is the same session as the one made in thread A.
Thread A Thread B Thread C
down_read()
sA = handshake->state
memcpy(cA, handshake->crypto)
up_read()
if (sA != 1)
goto fail
slow_crypto(cA)
down_read()
sB = handshake->state
memcpy(cB, handshake->crypto)
up_read()
if (sB != 1)
goto fail
slow_crypto(cB)
down_write()
if (sA != handshake->state)
goto fail
memcpy(handshake->crypto, cA)
handshake->state = 2
up_write()
down_write()
if (handshake->state != 2)
goto fail
derive_session(handshake->crypto)
up_write()
down_write()
slow_crypto(handshake->crypto)
handshake->state = 1
up_write()
down_write()
if (sB != handshake->state)
goto fail
memcpy(handshake->crypto, cB)
handshake->state = 2
up_write()
down_write()
if (handshake->state != 2)
goto fail
derive_session(handshake->crypto)
up_write()
This seems basically impossible to hit in a meaningful way in practice,
but ensure that it absolutely cannot happen by comparing the ephemeral
private key that's on the stack with the latest one that the peer's
handshake state has.
Cc: [email protected]
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Reported-by: Jérémy Jean <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Sending traffic through a wireguard tunnel on a host using the fq
qdisc fills the log with:
fq: likely mono tstamp with tstamp_type 0
An skb carries a timestamp in skb->tstamp and, separately, a
skb->tstamp_type field recording which clock that timestamp came from.
The two have to agree.
When wireguard encapsulates a packet it calls wg_reset_packet(), which
clears the fields that must not leak from the inner packet into the
tunnel packet. It does so in two steps:
skb_scrub_packet(skb, true);
memset(&skb->headers, 0, sizeof(skb->headers));
skb_scrub_packet() deliberately keeps skb->tstamp when it holds a
monotonic timestamp: that value is the time the packet is scheduled to
be sent, and the qdisc still needs it. The memset then zeroes
skb->tstamp_type, because that field sits inside the headers group
while skb->tstamp does not. The packet therefore leaves wireguard
carrying a monotonic timestamp labelled as a realtime one.
Nothing noticed until commit c4f796c4f1 ("net_sched: sch_fq: convert
skb->tstamp if not monotonic"): fq used to assume every timestamp was
monotonic. It now consults tstamp_type, spots the mismatch, warns, and
falls back to treating the value as monotonic. Pacing still ends up
correct, so the log spam is the actual problem.
Save tstamp_type before the memset and restore it when encapsulating,
next to the hash fields that are already carried over this way. When
decapsulating it stays zeroed, which is right: an incoming packet's
timestamp is a realtime receive timestamp.
Fixes: d98d58a002 ("net: Set skb->mono_delivery_time and clear it after sch_handle_ingress()")
Signed-off-by: Ramses de Norre <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Cc: [email protected]
Signed-off-by: Jason A. Donenfeld <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
When executing IPv6 address rewrite actions on IPv6 fragments,
set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr()
processes a non-first IPv6 fragment, it sets key->ip.proto to
NEXTHDR_FRAGMENT and returns early without calling
skb_set_transport_header().
update_ipv6_checksum() unconditionally evaluates skb_transport_offset()
on entry before checking l4_proto. Because skb->transport_header is
uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although
it is completely harmless.
Fix this by returning early in update_ipv6_checksum() if l4_proto is
NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset
for fragments while preserving the debug warning for any other protocol
where the transport header is unexpectedly missing.
See the syzbot trace:
!skb_transport_header_was_set(skb)
WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635
[...]
RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline]
RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline]
RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline]
RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399
[...]
Call Trace:
<TASK>
set_ipv6 net/openvswitch/actions.c:531 [inline]
do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366
ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592
ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705
genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114
genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209
netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218
netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800
Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=4cc63fcfb3845e149969
Fixes: 3fdbd1ce11 ("openvswitch: add ipv6 'set' action")
Signed-off-by: Fernando Fernandez Mancera <[email protected]>
Reviewed-by: Ilya Maximets <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
smc_getname() dereferences smc->clcsock without holding
clcsock_release_lock. Link-group termination can release the CLC socket
through smc_close_active_abort() while the SMC socket is still open,
for example after shutdown(SHUT_WR).
A getsockname() caller can load smc->clcsock, then the termination worker
can clear the pointer and call sock_release() before the caller accesses
clcsock->ops or invokes getname(). This causes a use-after-free; if the
worker clears the pointer before the load, it causes a NULL dereference.
The syscall's file reference keeps the SMC socket alive but does not
prevent asynchronous release of its CLC socket.
KASAN reported the following with test-only timing instrumentation:
BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0
Read of size 8 at addr ffff888109abb4e0 by task poc/103
Call Trace:
smc_getname+0x19e/0x1b0
do_getsockname+0xe5/0x170
__sys_getsockname+0x8c/0x100
Allocated by task 95:
sock_alloc_inode+0x1e/0x280
sock_alloc+0x3d/0x240
__sock_create+0x7e/0x430
smc_create+0x121/0x240
Freed by task 0:
kmem_cache_free+0xcc/0x340
rcu_core+0x50a/0x1850
Last potentially related work creation:
evict+0x446/0x6c0
smc_clcsock_release+0xa8/0xd0
smc_close_active_abort+0x26a/0x3a0
__smc_lgr_terminate.part.0+0x137/0x2e0
Hold clcsock_release_lock across the pointer check and the getname()
callback to serialize with smc_clcsock_release(). Return -EBADF if the
CLC socket has already been released, preserving the existing peer
state check and the callback's return value otherwise.
Fixes: b03faa1faf ("net/smc: postpone release of clcsock")
Cc: [email protected]
Signed-off-by: Chengfeng Ye <[email protected]>
Reviewed-by: Mahanta Jambigi <[email protected]>
Reviewed-by: Dust Li <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Daehyeon Ko says:
====================
ipv4/ipv6: do not warn on route notification size races
A nexthop group can grow between route notification sizing and filling.
Both IPv4 and IPv6 can then legitimately return -EMSGSIZE, so remove the
stale warnings while preserving their existing error paths.
Patch 1 is unchanged from v1. Patch 2 adds the IPv6 counterpart requested
by Ido. No new build or runtime test was run; both changes only delete the
stale comment and WARN_ON().
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Commit 680aea08e7 ("net: ipv4: Emit notification when fib hardware
flags are changed") added asynchronous route notifications for hardware
flag changes.
fib_alias_hw_flags_set() sizes the skb with fib_nlmsg_size() and later
fills it with fib_dump_info() while holding only RCU. With nexthop
compatibility mode enabled, a concurrent replacement can grow the group
between these independent snapshots. fib_dump_info() can then
legitimately return -EMSGSIZE, so the warning does not prove a sizing bug.
Remove the warning. The existing error path still frees the skb and
reports the error to listeners.
Fixes: 680aea08e7 ("net: ipv4: Emit notification when fib hardware flags are changed")
Reported-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/netdev/20261004082043.GB92032@shredder/
Suggested-by: Ido Schimmel <[email protected]>
Cc: [email protected]
Signed-off-by: Daehyeon Ko <[email protected]>
Link: https://patch.msgid.link/b7e203fc5867651cb67ef84aa03e082f0f76008e.1791423190.git.4ncienth@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
The commit in fixes introduced a high cap for delayas U64_MAX value
while ktime_t is actually s64. This is wrong cap as it becomes negative
value and any comparison to a real delay will fail to update delay
value. Use KTIME_MAX constant as correct max cap for PCIe delay.
The issue was hit in production (a negative value is observed):
# cat /sys/class/timecard/ocp0/ts_window_adjust
-3
Fixes: aa05fe67bc ("ptp: ocp: Improve PCIe delay estimation")
Signed-off-by: Vadim Fedorenko <[email protected]>
Reviewed-by: Daniel Machon <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
When a response chain has more slots than fit in the skb's frags,
xennet_fill_frags() returns an error and xennet_poll() jumps to its
error path. That path moves what's left on tmpq to errq to be freed,
but the skb being filled was already dequeued from tmpq, so it's never
freed. Each chain that overflows leaks the skb and the pages attached
to it as frags, and the backend decides how many slots it sends.
Put the skb back on tmpq before taking the error path, like the
xennet_set_skb_gso() failure just above it does.
Fixes: ad4f15dc2c ("xen/netfront: don't bug in case of too many frags")
Cc: [email protected]
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://patch.msgid.link/20261007-b4-xen-netfront-fill-frags-leak-v1-1-a8a01ff9cd52@toxicpanda.com
Signed-off-by: Jakub Kicinski <[email protected]>
SOCK_RAW packet sockets incorrectly drop VLAN-tagged GSO packets
without VIRTIO_NET_HDR_F_NEEDS_CSUM.
packet_parse_headers() sets skb->protocol to VLAN but advances
skb->network_header past the VLAN tags. virtio_net_hdr_to_skb()
then flow dissects these packets, which parses the network header as a
VLAN tag, and fails.
Call packet_parse_headers() after virtio_net_hdr_to_skb() instead.
This matches tun_get_user() and tap_get_user() and thus simplifies
overall complexity.
Commit 01fdecc048 ("net: packet: fix wrong transport_header when
sending VLAN-tagged frame") fixed the same issue for the transport
header probe in packet_parse_headers(). That probe is now skipped if
virtio_net_hdr_to_skb() already set the transport header, avoiding a
redundant dissection.
Implementation details:
- Do not set skb->protocol to the RX wildcard ETH_P_ALL. SOCK_RAW then
derives it from the link layer header, as before. SOCK_DGRAM now
leaves it 0, or derives it from gso_type for GSO with NEEDS_CSUM.
- Keep virtio_net_hdr_set_proto() last, so that the link layer protocol
takes priority over gso_type.
Reported-by: Junnan Zhang <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Fixes: dfed913e8b ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO")
Signed-off-by: Willem de Bruijn <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
handle_incoming_queue() pulls pull_to bytes into the head before
calling eth_type_trans(). pull_to is the length of the first RX slot,
capped at RX_COPY_THRESHOLD, and that length comes from the backend.
Nothing checks it against ETH_HLEN.
If the first slot is shorter than ETH_HLEN and more slots follow, the
head ends up shorter than an Ethernet header while skb->len is longer,
and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is
shorter than ETH_HLEN, eth_type_trans() reads the header past the end
of the data instead.
Pull at least ETH_HLEN, and drop the packet if that fails, which also
drops packets too short to hold an Ethernet header. This also checks
the return value of the pull, which was ignored.
Fixes: 0d16021196 ("xen: add virtual network device driver")
Cc: [email protected]
Signed-off-by: Josef Bacik <[email protected]>
Link: https://patch.msgid.link/20261007-b4-xen-netfront-short-head-v1-1-12d7113a7e4e@toxicpanda.com
Signed-off-by: Jakub Kicinski <[email protected]>
When skb_copy_and_csum_bits() reaches unreadable frags it returns 0
after copying only the linear part, and the rest of the caller's buffer
is left as it was. The callers copy into a buffer that is about to go
out on the wire: an ICMP error quoting the offending packet, or a
driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer
is zeroed beforehand, so whatever was in memory there gets sent.
Zero the part of the buffer we didn't fill. The checksum usually
won't match the data any more, so the receiver will usually drop the
packet, but either way it no longer carries anything it shouldn't.
Only zero for a positive @len, a negative one from a broken caller must
not turn into a huge memset().
Fixes: 65249feb6b ("net: add support for skbs with unreadable frags")
Cc: [email protected]
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: Mina Almasry <[email protected]>
Link: https://patch.msgid.link/20261007-b4-skb-copy-csum-stale-bytes-v1-1-adbbde033fb3@toxicpanda.com
Signed-off-by: Jakub Kicinski <[email protected]>
sparx5_tc_matchall_replace() allocates a struct sparx5_mall_entry for
every offloaded matchall filter and adds it to sparx5->mall_entries.
sparx5_tc_matchall_destroy() removes the entry from the list, but never
frees it, so the entry of every deleted mirror and goto matchall filter
is leaked.
Free the entry after unlinking it.
The leak was discovered by an AI code review agent, and reproduced with
kmemleak on a lan969x EV board (EV23X71A) by repeatedly adding and
deleting matchall mirror and goto filters. With the fix, kmemleak no
longer reports the leak.
Cc: [email protected]
Fixes: 1ede4acf04 ("net: sparx5: add bookkeeping code for matchall rules")
Signed-off-by: Daniel Machon <[email protected]>
Link: https://patch.msgid.link/20261007-sparx5-matchall-kfree-net-v1-1-c8918685b337@microchip.com
Signed-off-by: Jakub Kicinski <[email protected]>
Petr Machata says:
====================
mlxsw: Fix port range register leak
When the mlxsw driver parses a port range template rule, it acquires the
actual port range registers. The parsing is only done to determine the
element usage, so the registers can be deallocated right away, but this is
never done, and the registers are leaked. Plug this leak and add a selftest
that would have caught it.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
mlxsw_sp_flower_tmplt_create() parses a flow_cls_offload template
into a stack-local struct mlxsw_sp_acl_rule_info purely to compute
rulei.values.elusage. Parsing can acquire port range registers via
mlxsw_sp_flower_parse_ports_range(), but since this rulei never goes
through mlxsw_sp_acl_rulei_destroy(), those registers were never
released, including through chain template deletion.
Factor out of mlxsw_sp_acl_rulei_destroy() the code to actually
release the necessary resources and call from
mlxsw_sp_flower_tmplt_create() to plug the leak.
The issue was found during a review of Wentao Liang's patch referenced
below.
Fixes: fe22f74105 ("mlxsw: spectrum_flower: Add ability to match on port ranges")
Reported-by: Wentao Liang <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/95339cf970ce78e1a74aa86ffcc104ecf7c7762c.1791294384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
The KSZ8765 is similar to the KSZ8795 but has two fiber ports.
KSZ8_PORT_STATUS_0 is used to detect fiber mode. It is currently
defined as 0x08, which is the Global Control 6 MIB Control register
and has bit 7 defined as Flush Counter.
Set KSZ8_PORT_STATUS_0 to 0x18, which is the Port 1 Status 0 register
where bit 7 is the Fiber Mode bit.
This issue was discovered when upgrading an embedded device from kernel
5.10 to 6.16. The device was using a KSZ8765 device tree configuration
and the corresponding hardware, but during boot the kernel incorrectly
detected it as a KSZ8795. The relevant boot messages were:
ksz-switch spi0.0: found switch: KSZ8795, rev 0
ksz-switch spi0.0: Device tree specifies chip KSZ8765 but found KSZ8795, please fix it!
Cc: [email protected]
Fixes: 91a98917a8 ("net: dsa: microchip: move switch chip_id detection to ksz_common")
Reviewed-by: Nicolai Buchwitz <[email protected]>
Signed-off-by: Sebastien Royen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
mlx5e_poll_ico_cq() requires sq->cc to be updated only after
mlx5_cqwq_update_db_record(), otherwise a CQ overrun may occur.
The current implementation updates sq->cc before the CQ doorbell
record, violating this ordering requirement.
Update the CQ doorbell record first and use dma_wmb() before updating
sq->cc. This ensures that the CQ space is released to the device
before the corresponding ICOSQ consumer index is updated by software.
Fixes: fd9b4be800 ("net/mlx5e: RX, Support multiple outstanding UMR posts")
Signed-off-by: Li RongQing <[email protected]>
Reviewed-by: Dragos Tatulea <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Daniel Machon <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Tianyi Gao says:
====================
veth: fix peer NETDEV_XDP_ACT_NDO_XMIT after GRO is toggled while down
Toggling GRO on a veth device while it is down leaves its peer's
NETDEV_XDP_ACT_NDO_XMIT flag stale once the device comes up. XDP
redirects into the peer are then rejected with -EOPNOTSUPP, or, if GRO
was turned off, accepted and then dropped with -ENXIO. Patch 1 refreshes
the peer's flags in veth_open().
Patch 2 extends veth.sh to check the peer's flag after GRO is toggled
while the device is down, in both directions.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Test that toggling GRO on a veth device while it is down updates the
peer's ndo-xmit XDP feature once the device comes up, for both GRO on
and GRO off.
xdp-features is only visible through netlink, so read it with the ynl
CLI, as double_udp_encap.sh does. Skip the checks if the CLI is not
found, as in an installed kselftest tree.
Signed-off-by: Tianyi Gao <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
A veth device advertises NETDEV_XDP_ACT_NDO_XMIT only if its peer has an
XDP program attached or GRO enabled, that is, only if the peer will have
NAPI to receive the frames.
veth_set_features() updates the peer's flag when GRO is toggled, but
returns early if the device is down, and veth_open() only refreshes the
flags of the device being opened. Toggling GRO while the device is down
therefore leaves the peer's flag stale after the device comes up.
If GRO was enabled while down, the device comes up with NAPI but the
peer does not advertise NDO_XMIT, and devmap rejects redirects to the
peer with -EOPNOTSUPP. If GRO was disabled while down, the device comes
up without NAPI but the peer still advertises NDO_XMIT, so redirects are
accepted and then dropped in veth_xdp_xmit() with -ENXIO.
Commit 7a6102aa6d ("veth: Update XDP feature set when bringing up
device") made veth_open() refresh the device's own flags. Refresh the
peer's flags there too. The peer's flag depends on this device's XDP
program and GRO setting, not on whether the peer is up, so it is
correct to set it even if the peer is down.
Fixes: 8267fc71ab ("veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag")
Signed-off-by: Tianyi Gao <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Acked-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Commit 730ff06d3f ("net: mana: Use page pool fragments for RX buffers
instead of full pages to improve memory efficiency.") started handing
out RX buffers with zero headroom so that two buffers fit into one page
at the default MTU.
The MANA TX path, however, stores the per scatter-gather entry DMA
mappings in `struct mana_skb_head` at skb->head, and mana_start_xmit()
therefore calls skb_cow_head(skb, MANA_HEADROOM). The port advertises
this requirement as ndev->needed_headroom = MANA_HEADROOM.
As a result every packet that is received and then forwarded out of a
MANA port fails the skb_cow() in ip_forward() and gets reallocated and
copied by pskb_expand_head(). This is invisible to a plain RX or TX
workload, but it puts a full skb reallocation plus memcpy on the hot
path of every single forwarded packet, which is exactly what a
router/NVA workload does.
Restore the headroom. Note that reserving MANA_HEADROOM (232) is not
enough: ip_forward() asks for LL_RESERVED_SPACE(dev), which rounds
hard_header_len + needed_headroom up to HH_DATA_MOD and is 256 bytes on
ethernet. Use LL_RESERVED_SPACE() directly so the value keeps tracking
both constants. Also, since LL_RESERVED_SPACE() tracks MANA_HEADROOM,
it grows with MAX_SKB_FRAGS and for MAX_SKB_FRAGS >= 19 it is greater
than 256, so we have to account for that by using the headroom the RX
queue actually uses (instead of assuming XDP_PACKET_HEADROOM) and
turning MANA_XDP_MTU_MAX into MANA_XDP_MTU_MAX(ndev) (note that at the
default CONFIG_MAX_SKB_FRAGS=17 they are equivalent).
At the default MTU on a 4K page this means a buffer no longer fits twice
into a page (SKB_DATA_ALIGN(1500 + MANA_RXBUF_PAD + 256) = 2112), so the
frag-vs-single decision is now made by computing the real buffer size
instead of comparing the MTU against PAGE_SIZE / 2. The page_pool
fragment path is still used wherever at least two buffers genuinely fit,
e.g. on 16K and 64K page sizes.
Measured on an Azure VM with a MANA NIC acting as a forwarding NVA (UDP,
1400 byte payload, 4 streams, 8 Gbps offered, only the forwarding
node's kernel differs), 8 runs each, median:
forwarded pps throughput
before 272,830 3.06 Gbps
after 390,560 4.37 Gbps (+43%)
perf on the forwarding node, same workload:
memset_orig __pi_memcpy pskb_expand_head
before 10.07% 3.96% present
after 0.94% 0.64% gone
Cc: [email protected]
Fixes: 730ff06d3f ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.")
Signed-off-by: Hamza Mahfooz <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Pull ext4 fixes from Ted Ts'o:
"Mark the ext4 data=journal feature as being deprecated and will be
removed in 2028.
Also designate the primary branch that Sashiko and other tools use to
find the primary development branch in the ext4 tree"
* tag 'ext4_for_linus-7.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: mark data=journal as deprecated and will be removed in January 2028.
MAINTAINERS: name the ext4 dev branch
The ext4 T: entry names the repository without a branch, so tools that
default to the repository's HEAD select master, which still points at a
merge from October 2020 (96485e4462). Development happens on dev,
which is also the branch linux-next merges. Name it.
The Sashiko review bot, for one, falls back to HEAD this way and has
been reviewing ext4 patches against that tree. Its review of an EA
inode refcount fix reported a Critical double decrement and an
undefined function after applying the patch to that stale baseline;
neither holds on dev.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Matthias Goergens <[email protected]>
Acked-by: Jan Kara <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Pull power sequencing fixes from Bartosz Golaszewski:
- add missing PCI device IDs for Thinkpad T14s gen6 which should have
been part of commit a39ac4651e ("power: sequencing: pcie-m2: Match
WCN6855 and WCN7851 UART BT variants by subdevice ID") in
pwrseq-pcie-m2
- fix memory leak in pwrseq-pcie-m2 (leaking the array returned by
of_regulator_bulk_get_all())
* tag 'pwrseq-fixes-for-v7.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: pcie-m2: Fix leaking array from of_regulator_bulk_get_all()
power: sequencing: pcie-m2: Add Lenovo ThinkPad T14s gen6 WCN7850 subsystem PCI ids
Pull gpio fixes from Bartosz Golaszewski:
- fix runtime PM leak in error path in gpio-xilinx
- fix race when arming the IRQ poll worker in gpio-mpsse
- fix devres cleanup path on probe error in gpio-exar
* tag 'gpio-fixes-for-v7.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mpsse: fix race when arming the IRQ poll worker
gpio: exar: initialize the ID before registering its cleanup
gpio: xilinx: fix runtime PM leak on request error path
Pull MM fixes from Andrew Morton:
- Update .mailmap entries for Andy Yan and John Garry
- Fix read-only MAP_SHARED /dev/zero mappings so they retain
shared-file semantics instead of being treated as anonymous memory,
also avoiding a CONFIG_DEBUG_VM assertion
- Fix 32-bit build warnings in the hugetlb-mmap selftest caused by
using the wrong printf format for size_t values
- Fix a boot-time crash when early function tracing causes CPA to free
kernel page tables before the workqueues used for deferred freeing
are available
- Fix two MREMAP_DONTUNMAP locked_vm accounting leaks: one caused by
an mlock-on-fault VMA self-merging, and one caused by partially
remapping a locked VMA
* tag 'mm-hotfixes-stable-2026-10-07-21-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: update entry for Andy Yan
drivers/char/mem: mmap readonly MAP_SHARED-/dev/zero correctly
selftests/mm: cleanup -Wformat issues in hugetlb-mmap
mm: don't schedule deferred kernel page table freeing while booting
mailmap: update addresses for John Garry
mm/mremap: fix locked_vm leak by splitting VMA for MREMAP_DONTUNMAP
mm/mremap: fix locked_vm leak from MREMAP_DONTUNMAP self-merge
Pull SoC fixes from Arnd Bergmann:
- Four distinct issues in TEE firmware, all fairly minor
- Five devicetree mistakes on NXP i.MX8, lx2160a and Qualcomm
based machines, one of these may cause file system corruption
from an incorrect SD card supply voltage
- Five fixes for clk drivers on new Qualcomm platforms,
addressing issues with incorrect enable states
* tag 'soc-fixes-7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update my email address
tee: optee: ffa: support shared memory offsets on large-page kernels
optee: register TEE devices only once fully initialized
tee: shm: reject zero-sized allocations in tee_dyn_shm_alloc_helper()
arm64: dts: imx8mp-var-dart-sonata: Fix Sonata SD I/O supply
arm64: dts: lx2160a: fix the iic5 spi3 pinmux offset and value
arm64: dts: lx2160a: fix IIC1 pinmux submask rejected by pinctrl-single
arm64: dts: lx2160a: fix incorrect pinmux
clk: qcom: gpucc-kaanapali: Mark the GPU CX GDSC as votable
clk: qcom: gpucc-glymur: Mark the GPU CX GDSC as votable
clk: qcom: gcc-kaanapali: Fix always-enabling PCIE_RSCC clocks
clk: qcom: gcc-hawi: Fix always-enabling PCIE_RSCC clocks
clk: qcom: gcc-eliza: Fix always-enabling PCIE_RSCC clocks
arm64: dts: qcom: x1-denali: Fix microphone distortion
tee: qcomtee: fix kernel-doc warnings
Pull tracing fix from Paul McKenney:
"Fix a double-dereference splat in TP_printk in usb mtu3. This was a
pre-existing bug that can corrupt tracing output, but which was
exposed this cycle by additional checking that was added to the
tracing subsystem.
This splat is reporting a double-dereference that can result in
garbage traces being dumped due to the possibility of the TP_printk()
being executed without the benefit of main memory being present.
The fix is to move the extra dereference from TP_printk() time to
TP_fast_assign() time"
* tag 'usb-mtu3.2026.10.06a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
usb: mtu3: Fix double dereference in TP_printk
Pull RCU fix from Paul McKenney:
"Fix spurious WARN_ON() for rcu_segcblist_n_cbs() in
cleanup_srcu_struct()
This issue was introduced by 78a38cbf6f ("srcu: Queue
sdp->work when the delay timer is successfully deleted")
during this merge window.
Enough people are hitting this that I am sending it now
rather than waiting for the next merge window. Especially
given that it is a simple one-liner"
* tag 'urgent.2026.10.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
srcu: Fix WARN_ON() for rcu_segcblist_n_cbs() in cleanup_srcu_struct()
cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust
cached offsets for options that follow them.
For example, with a valid 10-byte CIPSO option followed by a seven-byte
RR option, parsing records rr at offset 30. Removing CIPSO moves RR to
offset 20, while the cached offset remains 30. Consumers such as
ip_forward_options() and __ip_options_echo() then access the wrong bytes;
the latter may interpret packet data as the option length and copy it into
fixed-size option storage.
Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and
router_alert offsets when they follow CIPSO. cipso_len is the distance
the first memmove() shifts those options. The later header move and
network-header reset relocate the bytes and their offset base together.
Fixes: 89aa3619d1 ("cipso: make cipso_v4_skbuff_delattr() fully remove the CIPSO options")
Cc: [email protected]
Reviewed-by: Ondrej Mosnáček <[email protected]>
Signed-off-by: Daehyeon Ko <[email protected]>
Acked-by: Paul Moore <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
bareudp_xmit_skb() sets the inner protocol of the skb to the configured
ethertype, and bareudp6_xmit_skb() does not set it at all. The inner
protocol is used by skb_udp_tunnel_segment() to segment the inner packet
when GSO has to be done in software, for instance when the lower device
does not offload the checksum.
With multiproto, an IPv4 device also carries IPv6, so the IPv6 header
is parsed as an IPv4 one. With IPv6 underlay, the inner protocol is
whatever the skb had before. In both cases segmentation fails and the
packets are dropped. With veth tx checksum offload disabled, iperf3 TCP
over bareudp gets about 10 Mbit/s with thousands of retransmits instead
of about 700 Mbit/s for IPv6 over IPv4 and for both families over IPv6,
while IPv4 over IPv4 works.
At this point skb->protocol is the protocol of the inner packet, which
bareudp_xmit() has already checked against the configuration, so use it
on both paths.
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Fixes: 4b5f67232d ("net: Special handling for IP & MPLS.")
Signed-off-by: Haishuang Yan <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Kyle Zeng