r305626 (by oshogbo):
Move libcasper tests from regression/capsicum/libcasper/ to
lib/libcasper/service/${service_name}/tests.
r305629 (by jkim):
Add new directories added in r305626 to fix "make installworld".
r307863 (by emaste):
Set SHLIBDIR before .including src.opts.mk in libcapser services
bsd.own.mk (included from src.opts.mk) sets SHLIBDIR?=${LIBDIR}, so
SHLIBDIR must be set before including either one of them.
MFC with: 305626
r322447:
Fix result printing
- Flushing stdout prevents the buffer from being printed twice, fixing
issues with stdout printing out the testplan, etc, twice.
- Don't print out raw source/line numbers; hide them behind comments.
r322448:
Make root-privileges a requirement for the test
Some of the testcases try to manipulate sysctls that require root privileges,
e.g., "kern.sync_on_panic". Make root-privileges a hard requirement so the
tests don't raise false positives due to privilege issues when calling
sysctlbyname(3) on writable sysctls.
r322449:
Use hardcoded IPv4/IPv6 addresses for google-public-dns-a.google.com instead
of freefall.freebsd.org to unbreak the DNS tests
The address allocations for freefall.freebsd.org have changed in the past 4 years.
Use a more stable set of hardcoded addresses for now to make the tests succeed
reliably.
The hostname should be resolved dynamically instead of hardcoding the addresses in
the future. This is just a bandaid.
r322450:
Integrate the tests moved in r305626 in to the FreeBSD test suite
The reachover Kyuafiles were never added, and thus the tests were installed
as standalone tests, and not integrated into the full suite.
MFC with: r305626, 305629, r307863, r322447, r322448, r322449
r322451:
TESTSDIR isn't required; remove it
MFC with: r322450
r319800:
Don't explicitly get the class to PART in gctl_test_helper.c
This will allow the tool to be used with arbitrary geom(4) classes, like GEOM.
Specify class=PART explicitly in the tester to keep existing behavior.
r319806:
Improve handling with system state
- Always unlink $cmd after exit via END block.
- The tests don't function well if kern.geom.debugflags != 0. Save debugflags,
then restore them at the end of the test.
r317290:
Fix -Wimplicit-function-declaration compilation warning by moving libgeom.h
#include below the stdio.h #include.
gctl_dump(3) needs stdio.h, per reasoning noted in r317289.
PR: 218809
r317291:
Rename gctl.t to gctl_test.t and test.c to gctl_test_helper.c
This is being done to reduce ambiguity and to make the tests more portable
in the future to other locations in the source tree.
r317292:
gctl_test.t: use make to compile gctl_test_helper instead of calling cc directly
r317293:
gctl_test_helper: apply polish
- Staticize variables to fix warnings.
- Sprinkle asserts around for calls that can fail
- Apply style(9) for main(..) definition.
- ANSIify usage(..) definition.
r317294:
Bump WARNS to 6 per previous commits which fixed warnings
Tested with: clang (4.0), gcc (4.2.1, 6.3.0)
r317295:
The GPT class no longer exists; use the PART class instead
r317304:
gctl_test_helper: add diagnostic output for parse_retval(..)
This will help end-users better diagnose issues with the function.
r317306:
gctl_test.t: minor tweaks
- Declare $count with the `my` scope operator to permit `use strict`.
- Add `use strict`.
- Use `use warnings` instead of using `-w` in the shebang.
- Don't unlink $cmd when done (prevents unnecessary rebuilding).
- Improve the error message when running with insufficient permissions, e.g.,
non-root.
r317307:
Use verb=delete not verb=remove
The `remove` verb hasn't been present in geom_part*(4) for well
over a decade, if ever. I couldn't find any references to it in
^/stable/5 at least, which is around the timeframe that this test
was written.
r317308:
gctl_test.t: more tweaks to try and update the code and get it functional (again?)
- Make the logfile for $out be built off the basename for $cmd, instead of $cmd.
(r317292 broke this assumption).
- Rename $mntpt to $mntpt_prefix for clarity, as this variable is a prefix for
mountpoints.
- Reindent the umount directive block while here to match the rest of the code.
r317309:
gctl_test.t: improve error reporting with mdcfg and mount directives
If the commands had failed previously, it would press on and result in a
series of cascading failures. Fail early and continue on to the next case
instead of executing additional commands after a previously failed series
of steps.
They were not very useful in their current state. It only ran a fork bomb,
confirmed headers/footers matched, hard-coded the number of expected entries
(rather than ensuring each entry is present when expected), and was missing a
sizeof_long.c file from r251368 which makes its intent for testing 32-bit
binaries unclear.
More extensive tests should be written with ATF now.
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, [email protected], emaste
Partially reviewed by: [email protected], bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
Although POSIX literally permits failing with [EINVAL] if IPC_CREAT and
IPC_EXCL were both passed, the semaphore set already exists and has fewer
semaphores than nsems, this does not allow an application to retry safely:
if the [EINVAL] is actually because of the semmsl limit, an infinite loop
would result.
PR: 206927
the second set (increment the original ports by 10)
This avoids issues where the first listening socket might not be torn
down by the time it makes it to the second set of testcases.
The sockets should likely only be setup once, but this keeps in the
spirit of the original testcases, so this will be easier to backport
to ^/stable/9
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
It always fails when trying to send through the sendit(9) private KPI in the
kernel due to a size mismatch between the msghdr and data being sent [*], which
suspiciously seems like it's related to sizeof pointers instead of scalars, or
something of that ilk
MFC after: 1 week
PR: 206543, 206544 [*]
Sponsored by: EMC / Isilon Storage Division
check_scm_creds_sockcred after initial != NULL checks have been done for
debugging purposes
- Use more terse names for bintime (bt), cmesgcred (cmcred),
sockcred (sc), and timeval (tv) [*]
- Add some debug messages to better understand some of the flow of the test
program
MFC after: 1 week
Requested by: bde [*]
Use of the word "terse" (^.^) corrected by: jhb, rpokala [*]
Sponsored by: EMC / Isilon Storage Division
This bug could be reproduced easily by calling sem_open() with O_CREAT |
O_EXCL on a semaphore that is already open in the process. The struct
sem_nameinfo would be freed while still in sem_list and later calls to
sem_open() or sem_close() could access freed memory.
PR: 206396
MFC after: 5 days
- Get rid of unused argc/argv variables in main
- Exit on failure with a return code of 1 instead of -1 with err/errx as a
return code of -1 is implementation dependent
- Bump WARNS to 6
MFC after: 5 days
Sponsored by: EMC / Isilon Storage Division
reconnect.c:
- Convert the K&R prototype of main to an ANSI prototype to mute a
warning from gcc 4.2.1
- Close s_sock2 after finishing off the last test to plug a leak and
mute a warning from gcc 5.0 about a -Wunused-but-set variable
sendfile.c:
- Fix a -Wunused-but-set warning with gcc 5.0 with pagesize in main(..)
MFC after: 5 days
Sponsored by: EMC / Isilon Storage Division
- `SOCK_RAW` is the implied supported type parameter for socket(2) per route(4)
- localsw in `sys/kern/uipc_usrreq.c` doesn't have an entry for `SOCK_RAW`, so
the prototype is invalid (this isn't explicitly documented anywhere I could
find)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will help ensure that scripts/parsers don't get confused when the message
is printed out
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
tools/regression/geom_{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
in to the FreeBSD test suite as
tests/sys/geom/class/{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
The tools/regression/geom and tools/regression/geom_part testcases are being
left alone because both test sets are both currently broken.
The majority of this work was done on ^/user/ngie/more-tests2 . The differences
are as follows:
- tests/sys/geom/class/Makefile.inc is not present; it was
inlined into the class's Makefiles for explicitness.
- The testcases officially require root via kyua
- The geom_gate(4) tests don't use the pidfile changes proposed in
https://reviews.freebsd.org/D4836 .
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
- Add a conf.sh file for executing common functions with geom_gate
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
- Add/increase sleeps to try and improve synchronization
- Add debug output for when checksums fail
test-1.t:
- Use pkill for killing ggated
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
(geom_test_cleanup, etc) down so the testcases don't emit noise when
bailing
- Conform to the TAP protocol better when dealing with classes that can't
be loaded and with temporary files that can't be allocated for tracking
md(4) devices.
MFC after: 2 weeks
X-MFC with: r293028, r293029, r293048
Sponsored by: EMC / Isilon Storage Division
- Delete test-2.sh as it was an incomplete testcase, and the contents were
basically a subset of test-1.sh
- Add a conf.sh file for executing common functions with geom_uzip
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
-- Use linear probing to find the first unique md(4) device, unlike the other
code which uses attach_md, as geli(8) allocates the md(4) devices itself
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
- Add a geom_concat specific cleanup function and trap on that function at
exit so things are cleaned up properly
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
- Implement a gmirror_test_cleanup function, which in turn calls
geom_test_cleanup to clean up all md(4) providers allocated in the test
run.
- Remove duplicate logic in test scripts for removing md(4) providers.
- Don't create files in /tmp (outside the kyua sandbox); use the current
directory instead
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
for all geom classes, e.g. geom_uzip(4)
- These tests require root. Skip all of the tests if they're run as non-root
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
suite as tests/sys/kern/unix_passfd_test
- Convert testcases to ATF
- Fix an alignment issues
- Mark rights_creds_payload(..) as an expected failure (see PR # 181741)
Based [in part] on the following Differential Revision:
https://reviews.freebsd.org/D689
MFC after: 1 week
Submitted by: markj
Sponsored by: EMC / Isilon Storage Division
- Delete some spurious whitespace
- Use calloc instead of malloc in the last test to ensure that
sendspace is properly zero'ed out
Differential Revision: https://reviews.freebsd.org/D689 (part of a larger diff)
MFC after: 1 week
Reviewed by: asomers, ngie
Submitted by: markj
Sponsored by: EMC / Isilon Storage Division
tools/regression/mac/mac_portacl into the FreeBSD test suite as
tests/sys/mac/bsdextended and tests/sys/mac/portacl, respectively
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
- A trap(1) call has been added to the test scripts to better
ensure that the tests do a better job at trying to restore the
test host state at the end of the tests (if the test was
interrupted before it would leave the system in an odd state,
potentially making the test results for subsequent runs
non-deterministic).
- Add root user checks
- Fix nc(1) usage:
-- -o is deprecated
-- Using `-w 10` will make the call timeout after 10 seconds so it
doesn't block indefinitely
- Use local variables
- Be more terse in the error messages
- Parameterize out "127.0.0.1"
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Use nitems(x) instead of handrolled sizeof(x) / sizeof(*x) macro
- Do not mark count != 0 case with bsde_get_rule_count as a failure; this
generates false positives on systems with ugidfw rules set on it
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Use temporary filesystems / memory disks instead of a hardcoded path
which doesn't exist on test systems
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Also, don't compile the ldexpl(3) testcases on platforms that don't support
the libcall (technically only x86 right now). This makes this test buildable on
arm*/mips*/powerpc*
PR: 205449 [*]
MFC after: 1 week
Tested on: stable/10 (amd64/i386), head (amd64/i386)
Sponsored by: EMC / Isilon Storage Division
Enji Cooper