r321791-r321792, r321795, r321798, r321821, r321823, r321826,
r321828, r321841, r321934, r322025-r322026, r322282, r322431,
r322473, r322475-r322479
Lots of i2c RTC driver stuff...
r321708:
Replace the pcf8563 i2c RTC driver with a new nxprtc driver which handles
all the chips in the NXP PCA212x and PCA/PCF85xx series. In addition to
supporting more chips, this driver uses the countdown timer on the chips as
a fractional seconds counter, giving it a resolution of about 15 milliseconds.
r321709:
Fix building this driver on non-FDT platforms.
r321710:
Add a few missing i2c devices that build fine on all arches.
r321711:
Move the device descriptions onto the device lines, so they cut and paste
nicely into other config files.
r321712:
Add the i2c RTC drivers found on various arm systems.
r321721:
Switch from using iic_transfer() to iicdev_readfrom/writeto(), mostly so
that transfers will be done with proper ownership of the bus. No
behavioral changes.
r321726:
Bugfixes and enhancements...
Don't enable the oscillator when it is found to be stopped at init time,
just let the first setting of valid time start it. But still report a dead
battery if it's stopped at init time.
Don't force the chip into 24hr mode, just cope with whatever mode it is
already in.
Align the RTC clock to top of second when setting it.
r321727:
Fix AM/PM mode handling. The bits to mask off in the hours register changes
between 12/24 hour mode. Also fix conversion between 12 and 24 hour mode.
It's not as easy as adding/subtracting 12, because the clock doesn't roll
over 11->0, it rolls over 12->1; 0 isn't a valid hour in AM/PM mode.
r321746:
Use the new clock_schedule() to arrange for clock_settime() to be called
at the right time to keep the RTC hardware time in sync, instead of using
pause_sbt() to sleep until the right time.
r321751:
Remove now-unused variable.
r321791:
Switch from using iic_transfer() to iicdev_readfrom/writeto(), mostly so
that transfers will be done with proper ownership of the bus. No
behavioral changes. Also add a detach() method.
r321792:
Add a detach() method.
r321795:
Check the clock-halted flag every time the clock is read, not just once
at startup. The flag stays set until the clock is loaded with good time,
so we need to keep saying the time is invalid until that happens.
r321798:
Restore a few rather important lines of code that got fumbled in r321746.
r321821:
No need to call getnanotime() now that the waiting is done by the central
subr_rtc code, switch from CLOCKF_SETTIME_NO_TS to CLOCKF_SETTIME_NO_ADJ
so that we get fed a timestamp, but it's not adjusted to compensate for
inaccuracy in setting time.
r321823:
Bugfixes and enhancements...
Don't enable the oscillator when it is found to be stopped at init time,
just let the first setting of valid time start it. But still report a dead
battery if it's stopped at init time.
Don't force the chip into 24hr mode, just cope with whatever mode it is
already in.
Schedule the clock_settime() callbacks to align the RTC clock to top of
second when setting it.
r321826:
Restructure the SUBDIR list as 1-per-line and alphabetize, so it will be
easier to add new things (and see what changed) in the future.
r321828:
Build iicbus/{ds1307,ds3231,nxprtc} as modules.
r321841:
Add a driver for the Intersil ISL12xx family of i2c RTC chips.
Supports ISL1209, ISL1218, ISL1219, ISL1220, ISL1221 (just basic RTC
functionality, not all the other fancy stuff the chips can do).
r321934:
Add missing ofw_bus_if.h src file.
r322025:
Switch to iicdev_readfrom/writeto() to do xfers with proper bus ownership.
Tested by: manu@
r322026:
Add missing header file to SRCS.
Reported by: manu@
r322282:
Remove the ds133x and s35390a i2c RTC drivers for now. They both do i2c
transfers in their probe() or attach() routines, and that doesn't work
when the low-level controller requires interrupts to be functional.
The DS133x family of chips is nearly identical to the DS1307 and support
for them should be added to that driver, then the ds133x driver can be
deleted. The s35390a driver just needs a non-trivial workover. In both
cases that work will be done and committed separately.
r322431:
Bid for the device with BUS_PROBE_GENERIC, because this is very much a
generic driver with minimal feature support for a large number of chips.
More featureful per-chip drivers might exist (especially out-of-tree) and
those should win the bidding even if they use BUS_PROBE_DEFAULT.
r322473:
Add a new driver, ds13rtc, that handles all DS13xx series i2c RTC chips.
This driver supports only basic timekeeping functionality. It completely
replaces the ds133x driver. It can also replace the ds1374 driver, but that
will take a few other changes in MIPS code and config, and will be committed
separately. It does NOT replace the existing ds1307 driver, which provides
access to some of the extended features on the 1307 chip, such as controlling
the square wave output signal. If both ds1307 and ds13rtc drivers are
present, the ds1307 driver will outbid and win control of the device.
This driver can be configured with FDT data, or by using hints on non-FDT
systems. In addition to the standard hints for i2c devices, it requires
a "chiptype" string of the form "dallas,ds13xx" where 'xx' is the chip id
(i.e., the same format as FDT compat strings).
r322475:
Change "chiptype" to "compatible". Making the hint name the same as the FDT
property name should make it easier to document the list of names accepted
by both configuration mechanisms.
r322476:
Remove the old ds1374 driver and use the ds13rtc driver instead. Adjust
several mips config files accordingly.
r322477:
Minor fixes and enhancements for the s35390a i2c RTC driver...
- Add FDT probe code.
- Do i2c transfers with exclusive bus ownership.
- Use config_intrhook_oneshot() to defer chip setup because some i2c
busses can't do transfers without interrupts.
- Add a detach() routine.
- Add to module build.
r322478:
Add back the drivers for Dallas/Maxim ds13xx and Seiko S35390x now that
they've been rewritten/fixed to not cause panics by doing i2c transfers
before interrupts are available.
PR: 221227
r322479:
Add hinted attachment for non-FDT systems. Also, print a message if
setting up the timer fails, because on some types of chips that's the
first attempt to access the device. If the chip is missing/non-responsive
then you'd get a driver that attached and didn't register the rtc, with
no clue about why. On other chip types there are inits that come before
timer setup, and they already print messages about errors.
Avoid use of contiguous memory allocations in busdma when possible.
This patch improves the boundary checks in busdma to allow more cases
using the regular page based kernel memory allocator. Especially in
the case of having a non-zero boundary in the parent DMA tag. For
example AMD64 based platforms set the PCI DMA tag boundary to
PCI_DMA_BOUNDARY, 4GB, which before this patch caused contiguous
memory allocations to be preferred when allocating more than PAGE_SIZE
bytes. Even if the required alignment was less than PAGE_SIZE bytes.
This patch also fixes the nsegments check for using kmem_alloc_attr()
when the maximum segment size is less than PAGE_SIZE bytes.
Updated some comments describing the code in question.
Differential Revision: https://reviews.freebsd.org/D10645
Reviewed by: kib, jhb, gallatin, scottl
Sponsored by: Mellanox Technologies
r313254,r313341
amd64: add atomic_fcmpset
==
sparc64: add atomic_fcmpset
==
Implement atomic_fcmpset_* for arm and arm64.
==
Add atomic_fcmpset_*() inlines for powerpc
Summary:
atomic_fcmpset_*() is analogous to atomic_cmpset(), but saves off the read value
from the target memory location into the 'old' pointer in the case of failure.
==
i386: add atomic_fcmpset
==
Don't retry a lost reservation in atomic_fcmpset()
The desired behavior of atomic_fcmpset_() is to always exit on error. Instead
of retrying on lost reservation, leave the retry to the caller, and return
==
Add atomic_fcmpset_*() inlines for MIPS
atomic_fcmpset_*() is analogous to atomic_cmpset(), but saves off the
read value from the target memory location into the 'old' pointer.
==
i386: fixup fcmpset
An incorrect output specifier was used which worked with clang by accident,
but breaks with the in-tree gcc version.
While here plug a whitespace nit.
==
Implement atomic_fcmpset_*() for RISC-V.
==
Use 64bit store instruction in atomic_fcmpset_64.
307332:
Drop support for using mmap() with /dev/kmem.
Using the device pager with /dev/kmem is not stable since KVA mappings
are transient, but the device pager caches the PA associated with a
given offset forever. Interestingly, mips' implementation of
memmap() already refused requests for /dev/kmem.
Note that kvm_read/kvm_write do not use mmap, but use read and write on
/dev/kmem, so this should not affect libkvm users.
312086:
Trim a few comments on platforms that did not implement mmap of /dev/kmem.
After r307332, no platforms implement mmap for /dev/kmem, so the lack of
it for these platforms is no longer unique.
Add an implementation for pmaps_sync_icache() on MIPS that sync's the
instruction cache on all CPUs via smp_rendezvous() after a debugger
inserts a breakpoint via ptrace(PT_IO).
Fix device delete child function.
When detaching device trees parent devices must be detached prior to
detaching its children. This is because parent devices can have
pointers to the child devices in their softcs which are not
invalidated by device_delete_child(). This can cause use after free
issues and panic().
Device drivers implementing trees, must ensure its detach function
detaches or deletes all its children before returning.
While at it remove now redundant device_detach() calls before
device_delete_child() and device_delete_children(), mostly in
the USB controller drivers.
Tested by: Jan Henrik Sylvester <[email protected]>
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D8070
r306899:
Fix release MSI method for ARM GIC
r307059:
INTRNG - fix MSI/MSIX release path
Use isrc in attached MSI data structure instead of using map's
isrc directly. map's isrc is set to NULL on IRQ deactivation
which happens prior to pci_release_msi so MSI_RELEASE_MSI
receives array of NULLs
Reviewed by: mmel
Differential Revision: https://reviews.freebsd.org/D8206
r307151:
INTRNG: Propagate IRQ activation error to API consumer
Keep resource state consistent with INTRNG state - if intr_activate_irq
fails - deactivate resource and propagate error to calling function
Reviewed by: mmel
r304459:
INTRNG: Rework handling with resources. Partially revert r301453.
- Read interrupt properties at bus enumeration time and store
it into global mapping table.
- At bus_activate_resource() time, given mapping entry is resolved and
connected to real interrupt source. A copy of mapping entry is attached
to given resource.
- At bus_setup_intr() time, mapping entry stored in resource is used
for delivery of requested interrupt configuration.
- For MSI/MSIX interrupts, mapping entry is created within
pci_alloc_msi()/pci_alloc_msix() call.
- For legacy PCI interrupts, mapping entry must be created within
pcib_route_interrupt() by pcib driver itself.
r305527:
Fix MIPS INTRNG (both FDT and non-FDT) behaviour broken by r304459
As of r302092, pipe is a wrapper around pipe2 and the pipe syscall is no
longer used. It is included only with the COMPAT_FREEBSD10 kernel option.
Add the compat option to support upgrades from systems with an earlier
userland.
Recource management functions in GT PCI controller driver
treated memory/IO resources as KSEG1 addresses, later during
activation these values would be increased by KSEG1 base again
rendering the address invalid and causing "bus error" trap.
Actual logic was converted to use real physical addresses,
so mapping takes place only during activation.
Submitted by: Aleksandr Rybalko <[email protected]>
Approved by: re (gjb)
The delta between SENTRY5 and BCM was already small due to BCM being
derived from SENTRY5; re-integrating the two avoids the maintenance
overhead of keeping them both in sync with bhnd(4) changes.
- Re-integrate minor SENTRY5 deltas in bcm_machdep.c
- Modify uart_cpu_chipc to allow specifying UART debug/console flags via
kenv and device hints.
- Switch SENTRY5 to std.broadcom
- Enabled CFI flash support for SENTRY5
Reviewed by: Michael Zhilin <[email protected]> (Broadcom MIPS support)
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6897
Replaces use of DEVICE_IDENTIFY with explicit enumeration of chipc
child devices using the chipc capability structure.
This is a precursor to PMU support, which requires more complex resource
assignment handling than achievable with the static device name-based
hints table.
Reviewed by: Michael Zhilin <[email protected]> (Broadcom MIPS support)
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6896
threads, to make it less confusing and using modern kernel terms.
Rename the functions to reflect current use of the functions, instead
of the historic KSE conventions:
cpu_set_fork_handler -> cpu_fork_kthread_handler (for kthreads)
cpu_set_upcall -> cpu_copy_thread (for forks)
cpu_set_upcall_kse -> cpu_set_upcall (for new threads creation)
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (hrs)
Differential revision: https://reviews.freebsd.org/D6731
Changes:
- Fixed incorrect MIPS74k vendor ID in the bhnd core descriptor tables
- Fixed MIPS core driver's matching against MIPS/MIPS33 cores.
- Improved MIPS3302 core description.
- Enabled BUS_PASS_BUS on the bhnd nexus drivers to allow early probing
of the MIPS core.
- Enabled BUS_PASS_CPU on the MIPS core driver to ensure correct attach
order.
- Disabled matching of the MIPS core driver on non-SoC devices.
Reviewed by: Michael Zhilin <[email protected]>
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6735
p_sched is unused.
The struct td_sched is always co-allocated with the struct thread,
except for the thread0. Avoid useless indirection, instead calculate
td_sched location using simple pointer arithmetic in td_get_sched(9).
For thread0, which is statically allocated, create a structure to
emulate layout of the dynamic allocation.
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D6711
Now that bhnd(4) provides feature parity with the previous siba/mips
implementation, we can switch sentry5 over and begin lifting common
support code out for use across bhnd(4) embedded targets.
Changes:
- Fixed enumeration of siba(4) per-core address maps, required for
discovery of memory mapped chipc flash region on siba(4) devices.
- Simplified bhnd kernel configuration (dropped 'bhndbus' option).
- Replaced files.broadcom's direct file references with their
corresponding standard kernel options.
- Lifted out common bcma/siba nexus support, inheriting from the new
generic bhnd_nexus driver.
- Dropped now-unused sentry5 siba code.
- Re-integrated BCM into the universe build now that it actually compiles.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6712
This adds support for serial (via SPI) and parallel (via CFI) flash
as found on BCM47xx/BCM53xx SoCs.
Submitted by: Michael Zhilin <[email protected]>
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6250
Etherswitch support is built by default on all SoCs except RT3662/RT3883
as they have no built-in switch and their configurations with external
switches are not yet supported.
Sponsored by: Smartcom - Bulgaria AD
Add more 'compatible' strings found in various LEDE DTS files.
Reviewed by: adrian
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6432
needed in later changes where we may not be able to lock the pic list lock
to perform a lookup, e.g. from within interrupt context.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
PCIe PHY needs different initialization on MT7628/MT7688 SoCs than it does
on MT7620.
However, LEDE (and OpenWRT) dts files have the PCIe node for MT7628/MT7688
as compatible with mt7620-pci.
We already can handle this properly in our driver, so we just need to add
compat strings to fbsd-mt7628an.dtsi and the PCIe driver.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6395
Relies on BHND(4) driver.
There files contains machine-dependent code for Broadcom MIPS processor and
provide UART driver.
This is a work in progress; it and the current bhnd code is enough to boot
on the ASUS RT-N16 and RT-N53 platforms.
Submitted by: Michael Zhilin <[email protected]>
Differential Revision: https://reviews.freebsd.org/D6251
interface with 5 methods to mirror the 5 MSI/MSI-X methods in the pcib
interface. The pcib driver will need to perform a device specific lookup
to find the MSI controller and pass this to intrng as the xref. Intrng
will finally find the controller and have it handle the requested operation.
Obtained from: ABT Systems Ltd
MFH: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5985
legacy siba sentry5 cpu glue.
The siba_cc code is the hard-coded chipcommon bits for the sentry s5,
which will eventually be replaced with the more flexible bhnd sipa/cc
code.
bwn, etc uses siba_bwn, which doesn't use siba or siba_cc to do anything.
Allow output pins to be read and input pins to be set.
Fix bugs where we were trying to access the gpio softc before doing
device_get_softc.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6222
struct associated with some type defined in enum intr_map_data_type
must have struct intr_map_data on the top of its own definition now.
When such structs are used, correct type and size must be filled in.
There are three such structs defined in sys/intr.h now. Their
definitions should be moved to corresponding headers by follow-up
commits.
While this change was propagated to all INTRNG like PICs,
pic_map_intr() method implementations were corrected on some places.
For this specific method, it's ensured by a caller that the 'data'
argument passed to this method is never NULL. Also, the return error
values were standardized there.
Ian Lepore