hyperv: Add VF bringup scripts and devd rules.
How network VF works with hn(4) on Hyper-V in non-transparent mode:
- Each network VF has a cooresponding hn(4).
- The network VF and the it's cooresponding hn(4) have the same hardware
address.
- Once the network VF is up, e.g. ifconfig VF up:
o All of the transmission should go through the network VF.
o Most of the reception goes through the network VF.
o Small amount of reception may go through the cooresponding hn(4).
This reception will happen, even if the the cooresponding hn(4) is
down. The cooresponding hn(4) will change the reception interface
to the network VF, so that network layer and application layer will
be tricked into thinking that these packets were received by the
network VF.
o The cooresponding hn(4) pretends the physical link is down.
- Once the network VF is down or detached:
o All of the transmission should go through the cooresponding hn(4).
o All of the reception goes through the cooresponding hn(4).
o The cooresponding hn(4) fallbacks to the original physical link
detection logic.
All these features are mainly used to help live migration, during which
the network VF will be detached, while the network communication to the
VM must not be cut off. In order to reach this level of live migration
transparency, we use failover mode lagg(4) with the network VF and the
cooresponding hn(4) attached to it.
To ease user configuration for both network VF and non-network VF, the
lagg(4) will be created by the following rules, and the configuration
of the cooresponding hn(4) will be applied to the lagg(4) automatically.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11635
308664
hyperv/vss: Add driver and tools for VSS
VSS stands for "Volume Shadow Copy Service". Unlike virtual machine
snapshot, it only takes snapshot for the virtual disks, so both
filesystem and applications have to aware of it, and cooperate the
whole VSS process.
This driver exposes two device files to the userland:
/dev/hv_fsvss_dev
Normally userland programs should _not_ mess with this device file.
It is currently used by the hv_vss_daemon(8), which freezes and
thaws the filesystem. NOTE: currently only UFS is supported, if
the system mounts _any_ other filesystems, the hv_vss_daemon(8)
will veto the VSS process.
If hv_vss_daemon(8) was disabled, then this device file must be
opened, and proper ioctls must be issued to keep the VSS working.
/dev/hv_appvss_dev
Userland application can opened this device file to receive the
VSS freeze notification, hold the VSS for a while (mainly to flush
application data to filesystem), release the VSS process, and
receive the VSS thaw notification i.e. applications can run again.
The VSS will still work, even if this device file is not opened.
However, only filesystem consistency is promised, if this device
file is not opened or is not operated properly.
hv_vss_daemon(8) is started by devd(8) by default. It can be disabled
by editting /etc/devd/hyperv.conf.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Reviewed by: kib, mckusick
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8224
308742
hyperv/vss: Nuke unused variables.
Submitted by: markj
Reported by: markj
Sponsored by: Microsoft
308743
hyperv/vss: Install the userland daemon to /usr/sbin instead of /
Submitted by: markj
Reported by: markj
Sponsored by: Microsoft
for i386/amd64. Rather, it only works on i386/amd64 and should only be
built there. Rather than change the default based on which
architecutre, do things more directly by only building it on
i386/amd64 and having it always on. This is how we handle other
options that are relevant only for a few architectures.
Summary:
Add a polling loop (1Hz) to monitor the battery and AC status, to notify devd
like ACPI does for power monitoring. This allows /etc/rc.d/power_profile to
work on PowerPC laptops
Test Plan:
Tested on a Titanium PowerBook, configuring economy_cpu_freq and
performance_cpu_freq, disabling powerd.
Reviewers: #powerpc, nwhitehorn
Reviewed By: nwhitehorn
Subscribers: rpaulo
Differential Revision: https://reviews.freebsd.org/D937
This is cleaner and eliminates the unneeded startup of KVP daemon on
systems that do not run as a Hyper-V guest.
Submitted by: hrs
X-MFC-with: 271493, 271688, 271699
Also, extend with some new events.
Additionally, tag syslog messages with 'ZFS' instead of using explicit "ZFS: "
prefix in the messages themselves.
Tested by: Daniel O'Connor <[email protected]>
MFC after: 8 days
Sponsored by: HybridCluster
latter.
It appears that the addition to uath(4) came in through PR kern/135009,
which had tested another device, the SMCWUSBTG2, successfully with uath(4)
and included the SMCWUSBG as it "has the same chipset". I can find no
other evidence that these two do actually share the same chipset. Moreover,
Linux treats the SMCWUSBG as a zyd(4) device also.
This reverts r223537.
Discussed with: hselasky, kevlo
MFC after: 1 week
Sepherosa Ziehau