Make fsck_y_enable default to passing pass -R to fsck_ffs(8) in addition
to -y. To me, fsck_y_enable means "try as hard as possible", and without
-R, it... well, doesn't.
r321444:
Remove ${MTREE} and leverage etc/mtree/Makefile instead with
"make distribution".
This also fixes the fact that BSD.debug.dist was being installed if/when
${MK_DEBUG_FILES} != "no" before this commit.
r321446:
Unconditionally install etc/mtree/BSD.debug.dist again
r279248 unconditionally installed BSD.debug.dist for ease-of-developer-use.
Restore the previous behavior.
While here, add a comment to note that this is intentional to avoid accidental
future removal.
MFC with: r321444
Fix 100.chksetuid and 110.neggrpperm for mountpoints with spaces
Also, fix them for mountpoints with tabs.
PR: 48325
Reported by: [email protected], [email protected]
MFC r309126 (by emaste):
Correct lld llvm-tblgen dependency file name
MFC r309169:
Get rid of separate Subversion mergeinfo properties for llvm-dwarfdump
and llvm-lto. The mergeinfo confuses Subversion enormously, and these
directories will just use the mergeinfo for llvm itself.
MFC r312765:
Pull in r276136 from upstream llvm trunk (by Wei Mi):
Use ValueOffsetPair to enhance value reuse during SCEV expansion.
In D12090, the ExprValueMap was added to reuse existing value during
SCEV expansion. However, const folding and sext/zext distribution can
make the reuse still difficult.
A simplified case is: suppose we know S1 expands to V1 in
ExprValueMap, and
S1 = S2 + C_a
S3 = S2 + C_b
where C_a and C_b are different SCEVConstants. Then we'd like to
expand S3 as V1 - C_a + C_b instead of expanding S2 literally. It is
helpful when S2 is a complex SCEV expr and S2 has no entry in
ExprValueMap, which is usually caused by the fact that S3 is
generated from S1 after const folding.
In order to do that, we represent ExprValueMap as a mapping from SCEV
to ValueOffsetPair. We will save both S1->{V1, 0} and S2->{V1, C_a}
into the ExprValueMap when we create SCEV for V1. When S3 is
expanded, it will first expand S2 to V1 - C_a because of S2->{V1,
C_a} in the map, then expand S3 to V1 - C_a + C_b.
Differential Revision: https://reviews.llvm.org/D21313
This should fix assertion failures when building OpenCV >= 3.1.
PR: 215649
MFC r312831:
Revert r312765 for now, since it causes assertions when building
lang/spidermonkey24.
Reported by: antoine
PR: 215649
MFC r316511 (by jhb):
Add an implementation of __ffssi2() derived from __ffsdi2().
Newer versions of GCC include an __ffssi2() symbol in libgcc and the
compiler can emit calls to it in generated code. This is true for at
least GCC 6.2 when compiling world for mips and mips64.
Reviewed by: jmallett, dim
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10086
MFC r318601 (by adrian):
[libcompiler-rt] add bswapdi2/bswapsi2
This is required for mips gcc 6.3 userland to build/run.
Reviewed by: emaste, dim
Approved by: emaste
Differential Revision: https://reviews.freebsd.org/D10838
MFC r318884 (by emaste):
lldb: map TRAP_CAP to a trace trap
In the absense of a more specific handler for TRAP_CAP (generated by
ENOTCAPABLE or ECAPMODE while in capability mode) treat it as a trace
trap.
Example usage (testing the bug in PR219173):
% proccontrol -m trapcap lldb usr.bin/hexdump/obj/hexdump -- -Cv -s 1 /bin/ls
...
(lldb) run
Process 12980 launching
Process 12980 launched: '.../usr.bin/hexdump/obj/hexdump' (x86_64)
Process 12980 stopped
* thread #1, stop reason = trace
frame #0: 0x0000004b80c65f1a libc.so.7`__sys_lseek + 10
...
In the future we should have LLDB control the trapcap procctl itself
(as it does with ASLR), as well as report a specific stop reason.
This change eliminates an assertion failure from LLDB for now.
MFC r319796:
Remove a few unneeded files from libllvm, libclang and liblldb.
MFC r319885 (by emaste):
lld: ELF: Fix ICF crash on absolute symbol relocations.
If two sections contained relocations to absolute symbols with the same
value we would crash when trying to access their sections. Add a check that
both symbols point to sections before accessing their sections, and treat
absolute symbols as equal if their values are equal.
Obtained from: LLD commit r292578
MFC r319918:
Revert r319796 for now, it can cause undefined references when linking
in some circumstances.
Reported by: Shawn Webb <[email protected]>
MFC r319957 (by emaste):
lld: Add armelf emulation mode
Obtained from: LLD r305375
MFC r321369:
Upgrade our copies of clang, llvm, lld, lldb, compiler-rt and libc++ to
5.0.0 (trunk r308421). Upstream has branched for the 5.0.0 release,
which should be in about a month. Please report bugs and regressions,
so we can get them into the release.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
MFC r321420:
Add a few more object files to liblldb, which should solve errors when
linking the lldb executable in some cases. In particular, when the
-ffunction-sections -fdata-sections options are turned off, or
ineffective.
Reported by: Shawn Webb, Mark Millard
MFC r321433:
Cleanup stale Options.inc files from the previous libllvm build for
clang 4.0.0. Otherwise, these can get included before the two newly
generated ones (which are different) for clang 5.0.0.
Reported by: Mark Millard
MFC r321439 (by bdrewery):
Move llvm Options.inc hack from r321433 for NO_CLEAN to lib/clang/libllvm.
The files are only ever generated to .OBJDIR, not to WORLDTMP (as a
sysroot) and are only ever included from a compilation. So using
a beforebuild target here removes the file before the compilation
tries to include it.
MFC r321664:
Pull in r308891 from upstream llvm trunk (by Benjamin Kramer):
[CodeGenPrepare] Cut off FindAllMemoryUses if there are too many uses.
This avoids excessive compile time. The case I'm looking at is
Function.cpp from an old version of LLVM that still had the giant
memcmp string matcher in it. Before r308322 this compiled in about 2
minutes, after it, clang takes infinite* time to compile it. With
this patch we're at 5 min, which is still bad but this is a
pathological case.
The cut off at 20 uses was chosen by looking at other cut-offs in LLVM
for user scanning. It's probably too high, but does the job and is
very unlikely to regress anything.
Fixes PR33900.
* I'm impatient and aborted after 15 minutes, on the bug report it was
killed after 2h.
Pull in r308986 from upstream llvm trunk (by Simon Pilgrim):
[X86][CGP] Reduce memcmp() expansion to 2 load pairs (PR33914)
D35067/rL308322 attempted to support up to 4 load pairs for memcmp
inlining which resulted in regressions for some optimized libc memcmp
implementations (PR33914).
Until we can match these more optimal cases, this patch reduces the
memcmp expansion to a maximum of 2 load pairs (which matches what we
do for -Os).
This patch should be considered for the 5.0.0 release branch as well
Differential Revision: https://reviews.llvm.org/D35830
These fix a hang (or extremely long compile time) when building older
LLVM ports.
Reported by: antoine
PR: 219139
MFC r321719:
Pull in r309503 from upstream clang trunk (by Richard Smith):
PR33902: Invalidate line number cache when adding more text to
existing buffer.
This led to crashes as the line number cache would report a bogus
line number for a line of code, and we'd try to find a nonexistent
column within the line when printing diagnostics.
This fixes an assertion when building the graphics/champlain port.
Reported by: antoine, kwm
PR: 219139
MFC r321723:
Upgrade our copies of clang, llvm, lld and lldb to r309439 from the
upstream release_50 branch. This is just after upstream's 5.0.0-rc1.
MFC r322320:
Upgrade our copies of clang, llvm and libc++ to r310316 from the
upstream release_50 branch.
MFC r322326 (by emaste):
lldb: Make i386-*-freebsd expression work on JIT path
* Enable i386 ABI creation for freebsd
* Added an extra argument in ABISysV_i386::PrepareTrivialCall for mmap
syscall
* Unlike linux, the last argument of mmap is actually 64-bit(off_t).
This requires us to push an additional word for the higher order bits.
* Prior to this change, ktrace dump will show mmap failures due to
invalid argument coming from the 6th mmap argument.
Submitted by: Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D34776
MFC r322360 (by emaste):
lldb: Report inferior signals as signals, not exceptions, on FreeBSD
This is the FreeBSD equivalent of LLVM r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
Submitted by: Karnajit Wangkhem
Obtained from: LLVM r310591
MFC r322474 (by emaste):
lld: Add `-z muldefs` option.
Obtained from: LLVM r310757
MFC r322740:
Upgrade our copies of clang, llvm, lld and libc++ to r311219 from the
upstream release_50 branch.
MFC r322855:
Upgrade our copies of clang, llvm, lldb and compiler-rt to r311606 from
the upstream release_50 branch.
As of this version, lib/msun's trig test should also work correctly
again (see bug 220989 for more information).
PR: 220989
MFC r323112:
Upgrade our copies of clang, llvm, lldb and compiler-rt to r312293 from
the upstream release_50 branch. This corresponds to 5.0.0 rc4.
As of this version, the cad/stepcode port should now compile in a more
reasonable time on i386 (see bug 221836 for more information).
PR: 221836
MFC r323245:
Upgrade our copies of clang, llvm, lld, lldb, compiler-rt and libc++ to
5.0.0 release (upstream r312559).
Release notes for llvm, clang and lld will be available here soon:
<http://releases.llvm.org/5.0.0/docs/ReleaseNotes.html>
<http://releases.llvm.org/5.0.0/tools/clang/docs/ReleaseNotes.html>
<http://releases.llvm.org/5.0.0/tools/lld/docs/ReleaseNotes.html>
Relnotes: yes
Bring back the much more readable unified format for differences in
/etc/{group,master.passwd}. This was originally turned on for all of
/etc/{aliases,group,master.passwd} in r55196, but then backed out
only for the latter two in r56697, as the adaption of the sed(1)ing
done in r56308 was incorrect. This left us with inconsistent diff(1)
formats in the daily output of periodic(8) ever since, despite in
r56697 having been promised to be revisited. So properly adapt the
password hash filtering to the unified format and turn the later on
again for /etc/{group,master.passwd}, too.
r305626 (by oshogbo):
Move libcasper tests from regression/capsicum/libcasper/ to
lib/libcasper/service/${service_name}/tests.
r305629 (by jkim):
Add new directories added in r305626 to fix "make installworld".
r307863 (by emaste):
Set SHLIBDIR before .including src.opts.mk in libcapser services
bsd.own.mk (included from src.opts.mk) sets SHLIBDIR?=${LIBDIR}, so
SHLIBDIR must be set before including either one of them.
MFC with: 305626
r322447:
Fix result printing
- Flushing stdout prevents the buffer from being printed twice, fixing
issues with stdout printing out the testplan, etc, twice.
- Don't print out raw source/line numbers; hide them behind comments.
r322448:
Make root-privileges a requirement for the test
Some of the testcases try to manipulate sysctls that require root privileges,
e.g., "kern.sync_on_panic". Make root-privileges a hard requirement so the
tests don't raise false positives due to privilege issues when calling
sysctlbyname(3) on writable sysctls.
r322449:
Use hardcoded IPv4/IPv6 addresses for google-public-dns-a.google.com instead
of freefall.freebsd.org to unbreak the DNS tests
The address allocations for freefall.freebsd.org have changed in the past 4 years.
Use a more stable set of hardcoded addresses for now to make the tests succeed
reliably.
The hostname should be resolved dynamically instead of hardcoding the addresses in
the future. This is just a bandaid.
r322450:
Integrate the tests moved in r305626 in to the FreeBSD test suite
The reachover Kyuafiles were never added, and thus the tests were installed
as standalone tests, and not integrated into the full suite.
MFC with: r305626, 305629, r307863, r322447, r322448, r322449
r322451:
TESTSDIR isn't required; remove it
MFC with: r322450
hyperv: Add VF bringup scripts and devd rules.
How network VF works with hn(4) on Hyper-V in non-transparent mode:
- Each network VF has a cooresponding hn(4).
- The network VF and the it's cooresponding hn(4) have the same hardware
address.
- Once the network VF is up, e.g. ifconfig VF up:
o All of the transmission should go through the network VF.
o Most of the reception goes through the network VF.
o Small amount of reception may go through the cooresponding hn(4).
This reception will happen, even if the the cooresponding hn(4) is
down. The cooresponding hn(4) will change the reception interface
to the network VF, so that network layer and application layer will
be tricked into thinking that these packets were received by the
network VF.
o The cooresponding hn(4) pretends the physical link is down.
- Once the network VF is down or detached:
o All of the transmission should go through the cooresponding hn(4).
o All of the reception goes through the cooresponding hn(4).
o The cooresponding hn(4) fallbacks to the original physical link
detection logic.
All these features are mainly used to help live migration, during which
the network VF will be detached, while the network communication to the
VM must not be cut off. In order to reach this level of live migration
transparency, we use failover mode lagg(4) with the network VF and the
cooresponding hn(4) attached to it.
To ease user configuration for both network VF and non-network VF, the
lagg(4) will be created by the following rules, and the configuration
of the cooresponding hn(4) will be applied to the lagg(4) automatically.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11635
r320702:
Formalize LEAPSECONDS and OLDTIMEZONES in share/zoneinfo/... as
`MK_ZONEINFO_LEAPSECONDS_SUPPORT == yes` and
`MK_ZONEINFO_OLD_TIMEZONES_SUPPORT == yes`.
Keep `LEAPSECONDS` and `OLDTIMEZONES` for backwards compatibility,
but print out a warning notifying users that they should use the new
variables, in an effort to migrate them to the variables. This is being
done mostly for automated build tools, etc, that might rely on these
variables being set. The variables will be removed in the future on
^/head, e.g., after ^/stable/12 is cut.
Relnotes: yes
r320703:
Add tests to help verify Links functionality for .../contrib/tzdata/backwards
MFC with: r320702
r320443:
Add kyua TAP test integration examples
The examples are patterned loosely after the ATF examples, similar
to the plain test examples.
r320444:
Commit the corresponding mtree file change for the TAP test examples
MFC with: r320443
"make distribution" with etc/newsyslog.conf.d/opensm.conf
installation. The cron.d and syslog.d changes were omitted by
request to avoid churn on ^/stable/{10,11}.
Requested by: jhb, peter
MFC r318545:
Install {cron.d,newsyslog.conf.d,syslog.d} via `make distribution`, not `make install`
I incorrectly started this pattern in r277541 with the opensm newsyslog.conf.d file,
and continued using it in r318441 and r318443.
This will fix the files being handled improperly via installworld, preventing tools like
etcupdate, mergemaster, etc from functioning properly when comparing the installed
contents on a system vs the contents in a source tree when doing merges.
PR: 219404
MFC with: r277541, r318441, r318443
Conditionally install /etc/pam.d/ftp* and /etc/pam.d/telnetd
/etc/pam.d/ftp* should be installed with MK_FTP != no and
/etc/pam.d/telnetd should be installed when MK_TELNET != no.
Add some initial basic tests for du(1)
Tests that exercise the following flags are added in this commit:
- -A
- -H
- -I
- -g
- -h
- -k
- -m
Additional tests will be added soon.
r303212 (by bdrewery):
Move chown tests to proper path
r319642:
Add some basic tests for chmod(1)
r319830:
Add more simple positive tests for chown(1)
The tests are largely symmetric with the tests for chmod(1)--added in r319642.
Remove chown-f_test (added in r268030) since the test coverage is now being
provided by `chown_test`.
sbuf(3): add some basic functional tests for the library
Areas not covered still [positive functionality wise] are:
- sbuf_{clear,get,set}_flags
- sbuf_new (in particular, with fixed buffers, etc).
Some basic negative testing has been added, but more will be added in the
future.
This work was in part to validate work done by cem in r288223, and ian
before that.
r319834:
Write up some basic tests for readlink(1)
The tests exercise -f (f_flag), -n (n_flag), and no arguments (basic).
r319841:
Add initial tests for stat(1)
Testcases for -H, -L, and -f haven't been implemented yet, in part due
to additional complexity needed to validate the features:
* -H and -f will require an external "helper" program to display/modify
the state/permissions for a given path.
* -L is being covered partially via the -n testcase today.
r320723:
Use %e instead of %d with x_output_date(..)
stat -x doesn't 0-fill days so %d is inappropriate. %e is correct.
MFC with: r319841
r320724:
:l_flag:: be more aggressive when normalizing whitespace
Save output from ls -ldT and stat -l, then normalize all repeating whitespace using
sed to single column spaces.
This makes the test flexible with single-digit days, etc, similar to r320723. This
approach is just a bit more of a hammer approach because of how the columns are
ordered/spaced in both ls and stat.
MFC with: r319841
Start writing up some basic feature tests for procstat
These tests query a running process for information related to the -b,
-c, -e, and -f flags; the -f testcase is largely stubbed out, pending
additional work to determine a good, deterministic descriptor.
Core file test support is coming soon--it requires a bit more effort
due to the fact that:
- coredumps can be disabled (kern.coredump=0).
- corefiles can be put in different directories than the current
directory, or be named something other than `<prog>.core`
(`kern.corefile`).
Add basic tests for echo(1)
Verify that echo(1) does not...
- ... print the trailing newline character with option '-n'.
- ... print the trailing newline character when '\c' is appended to
the end of the string.
r319714:
Add tests for ln(1)
* Verify that when creating a hard link to a symbolic link, '-L' option
creates a hard link to the target of the symbolic link
* Verify that when creating a hard link to a symbolic link, '-P' option
creates a hard link to the symbolic link itself
* Verify that if the target file already exists, '-f' option unlinks it so
that link may occur
* Verify that if the target file or directory is a symbolic link, '-shf'
option prevents following the link
* Verify that if the target file or directory is a symbolic link, '-snf'
option prevents following the link
* Verify that '-s' option creates a symbolic link
* Verify that '-w' option produces a warning if the source of a symbolic
link does not currently exist
Submitted by: shivansh
Reviewed by: asomers, ngie
Sponsored by: Google, Inc (GSoC 2017)
Differential Revision: https://reviews.freebsd.org/D11084
r319854:
bin/ln: Set umask appropriately before creating files for testing
These changes were missed in D11084
Submitted by: shivansh
Reviewed by: asomers
X-MFC-With: 319714
Sponsored by: Google, Inc (GSoC 2017)
Differential Revision: https://reviews.freebsd.org/D11158
Update leap-seconds to leap-seconds.3676924800.
As per https://datacenter.iers.org/eop/-/somos/5Rgv/latest/16:
INTERNATIONAL EARTH ROTATION AND REFERENCE SYSTEMS SERVICE (IERS)
SERVICE INTERNATIONAL DE LA ROTATION TERRESTRE ET DES SYSTEMES DE REFERENCE
SERVICE DE LA ROTATION TERRESTRE
OBSERVATOIRE DE PARIS
61, Av. de l'Observatoire 75014 PARIS (France)
Tel. : 33 (0) 1 40 51 23 35
FAX : 33 (0) 1 40 51 22 91
Internet : [email protected]
Paris, 9 January 2017
Bulletin C 53
To authorities responsible
for the measurement and
distribution of time
INFORMATION ON UTC - TAI
NO leap second will be introduced at the end of June 2017.
The difference between Coordinated Universal Time UTC and the
International Atomic Time TAI is :
from 2017 January 1, 0h UTC, until further notice : UTC-TAI = -37 s
Leap seconds can be introduced in UTC at the end of the months of December
or June, depending on the evolution of UT1-TAI. Bulletin C is mailed every
six months, either to announce a time step in UTC, or to confirm that there
will be no time step at the next possible date.
Christian BIZOUARD
Director
Earth Orientation Center of IERS
Observatoire de Paris, France
Obtained from: ftp://time.nist.gov/pub/leap-seconds.3676924800
Approved by: re@ (delphij@)
usr.bin/getconf: add some initial tests
Items tested via this commit are:
- Some basic POSIX constants.
- Some valid programming environments with -v.
- Some invalid programming environments via -v.
NOTE: this test makes assumptions about ILP32/LP32 vs LP64 that are
currently not true on all architectures to avoid hardcoding some
architectures in the tests. I'm working on improving getconf(1) to be
more sane about handling ILP32/LP32 vs LP64. Future commits are coming
soon to address this.
Tested with: amd64, i386
lib/libkvm: start adding basic tests for kvm(3)
- kvm_close: add a testcase to verify support for errno = EINVAL / -1
(see D10065) when kd == NULL is provided to the libcall.
- kvm_geterr:
-- Add a negative testcase for kd == NULL returning "" (see D10022).
-- Add two positive testcases:
--- test the error case using kvm_write on a O_RDONLY descriptor.
--- test the "no error" case using kvm_read(3) and kvm_nlist(3) as
helper routines and by injecting a bogus error message via
_kvm_err (an internal API) _kvm_err was used as there isn't a
formalized way to clear the error output, and because
kvm_nlist always returns ENOENT with the NULL terminator today.
- kvm_open, kvm_open2:
-- Add some basic negative tests for kvm_open(3) and kvm_open2(3).
Testing positive cases with a specific
`corefile`/`execfile`/`resolver` requires more work and would require
user intervention today in order to reliably test this out.
Silence sysctl in startup scripts.
This makes 'stop' behave consistently with 'start' in the script.
Also use $SYSCTL instead of sysctl for consistency within that script.
Allow root_rw_mount to be both lower and upper case. Before, if it was
upper case, you'd wind up with a read-only filesystem when you should
sometimes.
PR: 213549
Sponsored by: The FreeBSD Foundation
Enable automounting of exFAT media.
With fstyp(8) being updated to detect exfat in base r312003, it seems
like a good time to add support for auto-mounting SDXC cards -- which
use exfat by default.
The user will need to locally compile and install sysutils/fusefs-exfat
for this to succeed; logs a message to that effect when not installed.
PR: 218743
Submitted by: [email protected]
r315845, 315430, r317981, r315466
o Fix some overly long lines, whitespace and other bugs according to
style(9) as well as spelling etc. in mmc(4), mmcsd(4) and sdhci(4).
o In the mmc(4) bridges and sdhci(4) (bus) front-ends:
- Remove redundant assignments of the default bus_generic_print_child
device method,
- use DEVMETHOD_END,
- use NULL instead of 0 for pointers.
o Trim/adjust includes.
o Add and use a MMC_DECLARE_BRIDGE macro for declaring mmc(4) bridges
as kernel drivers and their dependency onto mmc(4).
o Add support for eMMC "partitions". Besides the user data area, i. e.
the default partition, eMMC v4.41 and later devices can additionally
provide up to:
1 enhanced user data area partition
2 boot partitions
1 RPMB (Replay Protected Memory Block) partition
4 general purpose partitions (optionally with a enhanced or extended
attribute)
Besides simply subdividing eMMC devices, some Intel NUCs having UEFI
code in the boot partitions etc., another use case for the partition
support is the activation of pseudo-SLC mode, which manufacturers of
eMMC chips typically associate with the enhanced user data area and/
or the enhanced attribute of general purpose partitions.
CAVEAT EMPTOR: Partitioning eMMC devices is a one-time operation.
o Now that properly issuing CMD6 is crucial (so data isn't written to
the wrong partition for example), make a step into the direction of
correctly handling the timeout for these commands in the MMC layer.
Also, do a SEND_STATUS when CMD6 is invoked with an R1B response as
recommended by relevant specifications.
o Add an IOCTL interface to mmcsd(4); this is sufficiently compatible
with Linux so that the GNU mmc-utils can be ported to and used with
FreeBSD (note that due to the remaining deficiencies outlined above
SANITIZE operations issued by/with `mmc` currently most likely will
fail). These latter have been added to ports as sysutils/mmc-utils.
Among others, the `mmc` tool of mmc-utils allows for partitioning
eMMC devices (tested working).
o For devices following the eMMC specification v4.41 or later, year 0
is 2013 rather than 1997; so correct this for assembling the device
ID string properly.
o Let mmcsd.ko depend on mmc.ko. Additionally, bump MMC_VERSION as at
least for some of the above a matching pair is required.
o In the ACPI front-end of sdhci(4) describe the Intel eMMC and SDXC
controllers as such in order to match the PCI one.
Additionally, in the entry for the 80860F14 SDXC controller remove
the eMMC-only SDHCI_QUIRK_INTEL_POWER_UP_RESET.
Quiet 450.status-security when *_inline="YES"
Previously, 450.status-security would always set rc=3 in inline mode,
because it doesn't know whether "periodic security" is going to find
anything interesting. But this annoyingly results in daily reports that
simply say "Security check: \n\n-- End of daily output --".
This change fixes that by testing whether "periodic security" printed
anything, and setting 450.status-security's exit status to 3 if it did. An
alternative would be to change the exit status of periodic(8) to be the
worst of its scripts' exit statuses, but that would be a more intrusive
change.
Reviewed by: brian
Differential Revision: https://reviews.freebsd.org/D10267
r316342:
Consolidate random sleeps in periodic scripts
Multiple periodic scripts sleep for a random amount of time in order to
mitigate the thundering herd problem. This is bad, because the sum of
multiple uniformly distributed random variables approaches a normal
distribution, so the problem isn't mitigated as effectively as it would be
with a single sleep.
This change creates a single configurable anticongestion sleep. periodic
will only sleep if at least one script requires it, and it will never sleep
more than once per invocation. It also won't sleep if periodic was run
interactively, fixing an unrelated longstanding bug.
PR: 217055
PR: 210188
Reviewed by: cy
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D10211
r316358:
Fix man page typo from r316342
Reported by: rgrimes
MFC after: 20 days
X-MFC-With: 316342
MFC r309142 (by emaste):
Add WITH_LLD_AS_LD build knob
If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not
capable of linking the world and kernel, but can self-host and link many
substantial applications. GNU ld continues to be used for the world and
kernel build, regardless of how this knob is set.
It is on by default for arm64, and off for all other CPU architectures.
Sponsored by: The FreeBSD Foundation
MFC r310840:
Reapply 310775, now it also builds correctly if lldb is disabled:
Move llvm-objdump from CLANG_EXTRAS to installed by default
We currently install three tools from binutils 2.17.50: as, ld, and
objdump. Work is underway to migrate to a permissively-licensed
tool-chain, with one goal being the retirement of binutils 2.17.50.
LLVM's llvm-objdump is intended to be compatible with GNU objdump
although it is currently missing some options and may have formatting
differences. Enable it by default for testing and further investigation.
It may later be changed to install as /usr/bin/objdump, it becomes a
fully viable replacement.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D8879
MFC r312855 (by emaste):
Rename LLD_AS_LD to LLD_IS_LD, for consistency with CLANG_IS_CC
Reported by: Dan McGregor <dan.mcgregor usask.ca>
MFC r313559 | glebius | 2017-02-10 18:34:48 +0100 (Fri, 10 Feb 2017) | 5 lines
Don't check struct rtentry on FreeBSD, it is an internal kernel structure.
On other systems it may be API structure for SIOCADDRT/SIOCDELRT.
Reviewed by: emaste, dim
MFC r314152 (by jkim):
Remove an assembler flag, which is redundant since r309124. The upstream
took care of it by introducing a macro NO_EXEC_STACK_DIRECTIVE.
http://llvm.org/viewvc/llvm-project?rev=273500&view=rev
Reviewed by: dim
MFC r314564:
Upgrade our copies of clang, llvm, lld, lldb, compiler-rt and libc++ to
4.0.0 (branches/release_40 296509). The release will follow soon.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
Also note that as of 4.0.0, lld should be able to link the base system
on amd64 and aarch64. See the WITH_LLD_IS_LLD setting in src.conf(5).
Though please be aware that this is work in progress.
Release notes for llvm, clang and lld will be available here:
<http://releases.llvm.org/4.0.0/docs/ReleaseNotes.html>
<http://releases.llvm.org/4.0.0/tools/clang/docs/ReleaseNotes.html>
<http://releases.llvm.org/4.0.0/tools/lld/docs/ReleaseNotes.html>
Thanks to Ed Maste, Jan Beich, Antoine Brodin and Eric Fiselier for
their help.
Relnotes: yes
Exp-run: antoine
PR: 215969, 216008
MFC r314708:
For now, revert r287232 from upstream llvm trunk (by Daniil Fukalov):
[SCEV] limit recursion depth of CompareSCEVComplexity
Summary:
CompareSCEVComplexity goes too deep (50+ on a quite a big unrolled
loop) and runs almost infinite time.
Added cache of "equal" SCEV pairs to earlier cutoff of further
estimation. Recursion depth limit was also introduced as a parameter.
Reviewers: sanjoy
Subscribers: mzolotukhin, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D26389
This commit is the cause of excessive compile times on skein_block.c
(and possibly other files) during kernel builds on amd64.
We never saw the problematic behavior described in this upstream commit,
so for now it is better to revert it. An upstream bug has been filed
here: https://bugs.llvm.org/show_bug.cgi?id=32142
Reported by: mjg
MFC r314795:
Reapply r287232 from upstream llvm trunk (by Daniil Fukalov):
[SCEV] limit recursion depth of CompareSCEVComplexity
Summary:
CompareSCEVComplexity goes too deep (50+ on a quite a big unrolled
loop) and runs almost infinite time.
Added cache of "equal" SCEV pairs to earlier cutoff of further
estimation. Recursion depth limit was also introduced as a parameter.
Reviewers: sanjoy
Subscribers: mzolotukhin, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D26389
Pull in r296992 from upstream llvm trunk (by Sanjoy Das):
[SCEV] Decrease the recursion threshold for CompareValueComplexity
Fixes PR32142.
r287232 accidentally increased the recursion threshold for
CompareValueComplexity from 2 to 32. This change reverses that
change by introducing a separate flag for CompareValueComplexity's
threshold.
The latter revision fixes the excessive compile times for skein_block.c.
MFC r314907 | mmel | 2017-03-08 12:40:27 +0100 (Wed, 08 Mar 2017) | 7 lines
Unbreak ARMv6 world.
The new compiler_rt library imported with clang 4.0.0 have several fatal
issues (non-functional __udivsi3 for example) with ARM specific instrict
functions. As temporary workaround, until upstream solve these problems,
disable all thumb[1][2] related feature.
MFC r315016:
Update clang, llvm, lld, lldb, compiler-rt and libc++ to 4.0.0 release.
We were already very close to the last release candidate, so this is a
pretty minor update.
Relnotes: yes
MFC r316005:
Revert r314907, and pull in r298713 from upstream compiler-rt trunk (by
Weiming Zhao):
builtins: Select correct code fragments when compiling for Thumb1/Thum2/ARM ISA.
Summary:
Value of __ARM_ARCH_ISA_THUMB isn't based on the actual compilation
mode (-mthumb, -marm), it reflect's capability of given CPU.
Due to this:
- use __tbumb__ and __thumb2__ insteand of __ARM_ARCH_ISA_THUMB
- use '.thumb' directive consistently in all affected files
- decorate all thumb functions using
DEFINE_COMPILERRT_THUMB_FUNCTION()
---------
Note: This patch doesn't fix broken Thumb1 variant of __udivsi3 !
Reviewers: weimingz, rengolin, compnerd
Subscribers: aemerson, dim
Differential Revision: https://reviews.llvm.org/D30938
Discussed with: mmel
Update devd.conf for ports change 421360
Ports change 421360 changed the name and UID of the postgres user
Reviewed by: trasz, imp, girgen
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9746
Allow 999.local to run scripts in any language
If one of the scripts listed in (daily|weekly|monthly)_local is executable,
999.local should simply execute it. Only if the script isn't executable
should 999.local assume it needs /bin/sh.
Reviewed by: brian
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
r314886:
pwait: Add a -t flag to specify a timeout before exiting, and tests.
r314943:
Remove unneeded -x from tests.
r314944:
Rename some tests to end in _test.
Start adding basic tests for cam(3)
This change contains several negative and positive tests for:
- cam_open_device
- cam_close_device
- cam_getccb
- cam_freeccb
This also contains a test for the failure case noted in bug 217649,
i.e., O_RDWR must be specified because pass(4) requires it.
This test unfortunately cannot assume that cam-capable devices are
present, so the user must explicitly provide a device via
`test_suites.FreeBSD.cam_test_device`. In the future, a test kernel
module might be shipped, or ctl(4) might be used, as a test device
when testing out libcam, which will allow the tests to do away with
having to specify an explicit test device.
Only install 900.tcpwrap if MK_INETD != "no" and MK_TCP_WRAPPERS != "no"
It relies on output from inetd that is triggered by MK_TCP_WRAPPERS=yes.
We need to check for both knobs being set -- otherwise the script doesn't
have much value.
PR: 217577
r313439:
Merge content from ^/projects/netbsd-tests-upstream-01-2017 into ^/head
The primary end-goal of this drop is ease future merges with NetBSD and
collaborate further with the NetBSD project.
The goal was (largely, not completely as some items are still oustanding
in the NetBSD GNATS system) achieved by doing the following:
- Pushing as many changes required to port contrib/netbsd-tests
back to NetBSD as possible, then pull the upstream applied changes
back in to FreeBSD.
- Diff reduce with upstream where possible by:
-- Improving libnetbsd header, etc compat glue.
-- Using _SED variables to modify test scripts on the fly for items
that could not be upstreamed to NetBSD.
As a bonus for this work, this change also introduces testcases for
uniq(1).
Many thanks to Christos for working with me to get many of the changes
back into the NetBSD project.
In collaboration with: Christos Zoulas <[email protected]>
r314450:
Add additional __FreeBSD_version guards around the hsearch_r testcases
The reasoning for this is the same as r276046: to ease MFCing the tests
to ^/stable/10 .
This was accidentally missed in r313439
Update ntp.conf to use the ntpd pool feature.
Our previous ntp.conf file configured 3 servers from freebsd.pool.ntp.org
using 3 separate 'server' config lines. That is now replaced with a single
'pool' line which causes ntpd to add multiple servers from the pool.
More than just making the config smaller, the pool feature in ntpd has one
major advantage over configuring 3 separate servers from a pool: if a server
that was added using a 'pool' statement provides bad time (initially or at
some later date), ntpd automatically discards it and configures a new
different server from the pool without needing to be restarted.
These changes also add a 'tos' line to control how many pool servers get
added, a 'restrict source' line that is required to allow ntpd to add new
peers from the pool, and it deletes a 'restrict 127.127.1.0' line that does
nothing and should never have been there (127.127.1.0 is not a valid IP
address, it's a refclock identifier).
Add "pool" to the keywords that rc.d/ntpdate examines to
find a server address in ntp.conf.
r311572:
Fix file descriptor leaks in cmp(1)
Also, add a few test cases
Reported by: Coverity
CID: 271624 275338
Reviewed by: ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9074
r311895:
Fix memory leaks during "tail -r" of an irregular file
* Rewrite r_buf to use standard tail queues instead of a hand-rolled
circular linked list. Free dynamic allocations when done.
* Remove an optimization for the case where the file is a multiple of 128KB
in size and there is a scarcity of memory.
* Add ATF tests for "tail -r" and its variants.
Reported by: Valgrind
Reviewed by: ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9067
r311928:
Fix build of usr.bin/tail with GCC
Submitted by: pluknet
Reported by: pluknet
MFC after: 27 days
X-MFC-with: 311895
Sponsored by: Spectra Logic Corp
r311985:
Fix uninitialized variable CIDs in route6d
The variables in question are actually return arguments, but it's still good
form to initialize them.
Reported by: Coverity
CID: 979679 979680
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
r312395:
Fix several Coverity CIDs in devd
CID 1362055, 1362054: File descriptor leaks during shutdown
CID 1362013: Potential null-termination fail with long network device names
CID 1362097: Uncaught exception during memory pressure
CID 1362017, 1362016: Unchecked errors, possibly resulting in weird behavior
if two devd instances start at the same time.
CID 1362015: Unchecked error that will probably never fail
Reported by: Coverity
CID: 1362055 1362054 1362013 1362097 1362017 1362016 1362015
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
r312417:
Fix build of devd with GCC 4.2
Reported by: olivier
Pointy-hat-to: asomers
MFC after: 27 days
X-MFC-with: 312395
Sponsored by: Spectra Logic Corp
Provide some guidance when dealing with sections and variables contained
within them
For example, using variables designated for %usm requires uncommenting
%usm section header
308664
hyperv/vss: Add driver and tools for VSS
VSS stands for "Volume Shadow Copy Service". Unlike virtual machine
snapshot, it only takes snapshot for the virtual disks, so both
filesystem and applications have to aware of it, and cooperate the
whole VSS process.
This driver exposes two device files to the userland:
/dev/hv_fsvss_dev
Normally userland programs should _not_ mess with this device file.
It is currently used by the hv_vss_daemon(8), which freezes and
thaws the filesystem. NOTE: currently only UFS is supported, if
the system mounts _any_ other filesystems, the hv_vss_daemon(8)
will veto the VSS process.
If hv_vss_daemon(8) was disabled, then this device file must be
opened, and proper ioctls must be issued to keep the VSS working.
/dev/hv_appvss_dev
Userland application can opened this device file to receive the
VSS freeze notification, hold the VSS for a while (mainly to flush
application data to filesystem), release the VSS process, and
receive the VSS thaw notification i.e. applications can run again.
The VSS will still work, even if this device file is not opened.
However, only filesystem consistency is promised, if this device
file is not opened or is not operated properly.
hv_vss_daemon(8) is started by devd(8) by default. It can be disabled
by editting /etc/devd/hyperv.conf.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Reviewed by: kib, mckusick
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8224
308742
hyperv/vss: Nuke unused variables.
Submitted by: markj
Reported by: markj
Sponsored by: Microsoft
308743
hyperv/vss: Install the userland daemon to /usr/sbin instead of /
Submitted by: markj
Reported by: markj
Sponsored by: Microsoft
r310458:
Group all loadable modules in the %default section
This will allow new users to uncomment the modules and have things work
with less head scratching, in the event they decide to uncomment any
of the section separators, e.g. %usm or %vcm, as the module loading is
only effective in the %default section.
r310466:
Don't hardcode $(securityModelUSM) (3) in the authPriv example under the %vacm
section
Edward Tomasz Napierala