Paul B Schroeder e0980dafa3 [PATCH] Exar quad port serial ...

This is on our "Envoy" boxes which we have, according to the documentation, an
"Exar ST16C554/554D Quad UART with 16-byte Fifo's".  The box also has two
other "on-board" serial ports and a modem chip.

The two on-board serial UARTs were being detected along with the first two
Exar UARTs.  The last two Exar UARTs were not showing up and neither was the
modem.

This patch was the only way I could the kernel to see beyond the standard four
serial ports and get all four of the Exar UARTs to show up.

[[email protected]: build fix]
Signed-off-by:  Paul B Schroeder <[email protected]>
Cc: Lennart Sorensen <[email protected]>
Acked-by: Alan Cox <[email protected]>
Cc: Russell King <[email protected]>
Cc: Greg KH <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

2006-12-07 08:39:35 -08:00

..

cpm_uart

[POWERPC] CPM_UART: Fix inconsistency of function definition

2006-12-04 20:39:25 +11:00

jsm

Various drivers' irq handlers: kill dead code, needless casts

2006-10-06 15:00:58 -04:00

8250_accent.c

…

8250_acorn.c

…

8250_au1x00.c

…

8250_boca.c

…

8250_early.c

…

8250_exar_st16c554.c

[PATCH] Exar quad port serial

2006-12-07 08:39:35 -08:00

8250_fourport.c

…

8250_gsc.c

[PARISC] Clean up asm-parisc/serial.h

2006-10-04 06:47:03 -06:00

8250_hp300.c

…

8250_hub6.c

…

8250_mca.c

…

8250_pci.c

[SERIAL] CONFIG_PM=n slim: drivers/serial/8250_pci.c

2006-10-01 17:07:08 +01:00

8250_pnp.c

[SERIAL] add PNP IDs for FPI based touchscreens

2006-10-01 21:27:15 +01:00

8250.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

8250.h

…

21285.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

68328serial.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

68328serial.h

…

68360serial.c

Various drivers' irq handlers: kill dead code, needless casts

2006-10-06 15:00:58 -04:00

amba-pl010.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

amba-pl011.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

atmel_serial.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

atmel_serial.h

[PATCH] at91_serial -> atmel_serial: Internal names

2006-10-04 10:25:05 -07:00

clps711x.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

crisv10.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

crisv10.h

…

dz.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

dz.h

…

icom.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

icom.h

…

imx.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

ioc3_serial.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

ioc4_serial.c

[PATCH] ioc4_serial: irq flags fix

2006-10-30 12:08:40 -08:00

ip22zilog.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

ip22zilog.h

…

Kconfig

[PATCH] Exar quad port serial

2006-12-07 08:39:35 -08:00

m32r_sio_reg.h

…

m32r_sio.c

[PATCH] m32r pt_regs fixes

2006-10-07 10:51:15 -07:00

m32r_sio.h

…

Makefile

[PATCH] Exar quad port serial

2006-12-07 08:39:35 -08:00

mcfserial.c

[PATCH] m68knommu: ColdFire serial driver fixes

2006-12-06 07:41:26 -08:00

mcfserial.h

…

mpc52xx_uart.c

[POWERPC] Add of_platform_bus support to mpc52xx psc uart driver

2006-12-05 09:53:07 +11:00

mpsc.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

mux.c

Build fixes for struct pt_regs removal

2006-10-06 20:47:23 -06:00

netx-serial.c

Various drivers' irq handlers: kill dead code, needless casts

2006-10-06 15:00:58 -04:00

pmac_zilog.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

pmac_zilog.h

…

pxa.c

Various drivers' irq handlers: kill dead code, needless casts

2006-10-06 15:00:58 -04:00

s3c2410.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

sa1100.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

serial_core.c

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial

2006-10-03 09:13:29 -07:00

serial_cs.c

[PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation

2006-12-04 20:12:02 -05:00

serial_lh7a40x.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

serial_txx9.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

sh-sci.c

sh: Clock framework tidying.

2006-12-06 10:45:40 +09:00

sh-sci.h

sh: More flexible + SH7780 earlyprintk SCIF support.

2006-12-06 10:45:39 +09:00

sn_console.c

[IA64] Fix breakage from irq change

2006-10-06 10:09:41 -07:00

suncore.c

…

suncore.h

…

sunhv.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

sunsab.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

sunsab.h

…

sunsu.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

sunzilog.c

[SPARC32]: Fix sparc32 modpost warnings with sunzilog

2006-10-11 23:56:53 -07:00

sunzilog.h

…

uartlite.c

[PATCH] serial uartlite driver

2006-12-07 08:39:30 -08:00

v850e_uart.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00

vr41xx_siu.c

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05 15:10:12 +01:00