Javier Martinez Canillas 1c6e58d836 mmc: pwrseq: Use highest priority for eMMC restart handler ...

The pwrseq_emmc driver does a eMMC card reset before a system reboot to
allow broken or limited ROM boot-loaders (that don't have an eMMC reset
logic) to be able to read the second stage from the eMMC.

But this has to be called before a system reboot handler and while most
of them use the priority 128, there are other restart handlers (such as
the syscon-reboot one) that use a higher priority. So, use the highest
priority to make sure that the eMMC hw is reset before a system reboot.

Signed-off-by: Javier Martinez Canillas <[email protected]>
Tested-by: Markus Reichl <[email protected]>
Tested-by: Anand Moon <[email protected]>
Reviewed-by: Alim Akhtar <[email protected]>
Tested-by: Douglas Anderson <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>

2015-10-27 11:11:06 +01:00

..

bus.c

Revert "mmc: core: Convert mmc_driver to device_driver"

2015-04-17 11:48:01 +02:00

bus.h

…

core.c

mmc: core: Add mmc_regulator_set_vqmmc()

2015-10-26 16:00:10 +01:00

core.h

mmc: core: Remove MMC_CLKGATE

2015-10-26 16:00:09 +01:00

debugfs.c

mmc: core: Remove MMC_CLKGATE

2015-10-26 16:00:09 +01:00

host.c

mmc: core: Add DT bindings for eMMC hardware reset support

2015-10-27 10:21:15 +01:00

host.h

mmc: host: Add facility to support re-tuning

2015-06-01 09:06:53 +02:00

Kconfig

mmc: core: Remove MMC_CLKGATE

2015-10-26 16:00:09 +01:00

Makefile

mmc: pwrseq: add driver for emmc hardware reset

2015-02-04 09:45:09 +01:00

mmc_ops.c

mmc: mmc: extend the mmc_send_tuning()

2015-10-27 10:38:41 +01:00

mmc_ops.h

mmc: core: Convert __mmc_switch() into an internal core function

2015-10-26 15:59:54 +01:00

mmc.c

mmc: skip reclaiming host on mmc_add_card() error

2015-10-26 16:00:14 +01:00

pwrseq_emmc.c

mmc: pwrseq: Use highest priority for eMMC restart handler

2015-10-27 11:11:06 +01:00

pwrseq_simple.c

mmc: pwrseq_simple: use GPIO descriptors array API

2015-10-26 15:59:59 +01:00

pwrseq.c

mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()

2015-04-17 10:17:19 +02:00

pwrseq.h

mmc: pwrseq: simplify alloc/free hooks

2015-03-23 14:13:42 +01:00

quirks.c

mmc: core: Remove MMC_CLKGATE

2015-10-26 16:00:09 +01:00

sd_ops.c

…

sd_ops.h

…

sd.c

mmc: skip reclaiming host on mmc_add_card() error

2015-10-26 16:00:14 +01:00

sd.h

…

sdio_bus.c

mmc: core: Attach PM domain prior probing of SDIO func driver

2015-06-04 10:03:51 +02:00

sdio_bus.h

…

sdio_cis.c

…

sdio_cis.h

…

sdio_io.c

…

sdio_irq.c

mmc: core: Remove MMC_CLKGATE

2015-10-26 16:00:09 +01:00

sdio_ops.c

…

sdio_ops.h

mmc: Add mmc_is_io_op helper function

2015-10-26 16:00:01 +01:00

sdio.c

mmc: core: Remove MMC_CLKGATE

2015-10-26 16:00:09 +01:00

slot-gpio.c

mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts

2015-01-19 09:56:29 +01:00

slot-gpio.h

mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core

2015-01-19 09:56:17 +01:00