The following
[PATCH] Clean up and refactor i386 sub-architecture setup
Doesn't quite work, since it leaves out an include of asm/io.h, without
which the use of inb/outb in the setup file won.t work. This corrects that
and also removes a spurious acpi reference that apparently crept in ages
ago but should never have been there.
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Commit 1e9f28fa1e ("[PATCH] sched: new
sched domain for representing multi-core") incorrectly made SCHED_SMT
and some of the structures it uses dependent on SMP.
However, this is wrong, the structures are only defined if X86_HT, so
SCHED_SMT has to depend on that as well.
The patch broke voyager, since it doesn't provide any of the multi-core
or hyperthreading structures.
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Commit c3ff8ec31c ("[PATCH] i386: Don't
miss pending signals returning to user mode after signal processing")
meant that vm86 interrupt/signal handling got broken for the case when
vm86 is called from kernel space.
In this scenario, if signal is pending because of vm86 interrupt,
do_notify_resume/do_signal exits immediately due to user_mode() check,
without processing any signals. Thus, resume_userspace handler is spinning
in a tight loop with signal pending and TIF_SIGPENDING is set. Previously
everything worked Ok.
No in-tree usage of vm86() from kernel space exists, but I've heard
about a number of projects out there which use vm86 calls from kernel,
one of them being this, for instance:
http://dev.gentoo.org/~spock/projects/vesafb-tng/
The following patch fixes the issue.
Signed-off-by: Aleksey Gorelov <[email protected]>
Cc: Atsushi Nemoto <[email protected]>
Cc: Roland McGrath <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Using C code for current_thread_info() lets the compiler optimize it.
With gcc 4.0.2, kernel is smaller:
text data bss dec hex filename
3645212 555556 312024 4512792 44dc18 2.6.17-rc6-nb-post/vmlinux
3647276 555556 312024 4514856 44e428 2.6.17-rc6-nb/vmlinux
-------
-2064
Signed-off-by: Chuck Ebbert <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Move the phys_core_id and cpu_core_id to cpuinfo_x86 structure. Similar
patch for x86_64 is already accepted by Andi earlier this week.
[[email protected]: fix warning]
Signed-off-by: Rohit Seth <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Remove the limit of 256 interrupt vectors by changing the value stored in
orig_{e,r}ax to be the complemented interrupt vector. The orig_{e,r}ax
needs to be < 0 to allow the signal code to distinguish between return from
interrupt and return from syscall. With this change applied, NR_IRQS can
be > 256.
Xen extends the IRQ numbering space to include room for dynamically
allocated virtual interrupts (in the range 256-511), which requires a more
permissive interface to do_IRQ.
Signed-off-by: Ian Pratt <[email protected]>
Signed-off-by: Christian Limpach <[email protected]>
Signed-off-by: Chris Wright <[email protected]>
Signed-off-by: Rusty Russell <[email protected]>
Cc: "Protasevich, Natalie" <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
The patch fixes two issues:
1. cpu_init is called with interrupt disabled. Allocating gdt table
there isn't good at runtime.
2. gdt table page cause memory leak in CPU hotplug case.
Signed-off-by: Shaohua Li <[email protected]>
Cc: Ashok Raj <[email protected]>
Cc: Zachary Amsden <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Update SELinux to cause the keycreate process attribute held in
/proc/self/attr/keycreate to be inherited across a fork and reset upon
execve. This is consistent with the handling of the other process
attributes provided by SELinux and also makes it simpler to adapt logon
programs to properly handle the keycreate attribute.
Signed-off-by: Michael LeMay <[email protected]>
Signed-off-by: David Howells <[email protected]>
Acked-by: Stephen Smalley <[email protected]>
Acked-by: James Morris <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
With Goto-san's patch, we can add new pgdat/node at runtime. I'm now
considering node-hot-add with cpu + memory on ACPI.
I found acpi container, which describes node, could evaluate cpu before
memory. This means cpu-hot-add occurs before memory hot add.
In most part, cpu-hot-add doesn't depend on node hot add. But register_cpu(),
which creates symbolic link from node to cpu, requires that node should be
onlined before register_cpu(). When a node is onlined, its pgdat should be
there.
This patch-set holds off creating symbolic link from node to cpu
until node is onlined.
This removes node arguments from register_cpu().
Now, register_cpu() requires 'struct node' as its argument. But the array of
struct node is now unified in driver/base/node.c now (By Goto's node hotplug
patch). We can get struct node in generic way. So, this argument is not
necessary now.
This patch also guarantees add cpu under node only when node is onlined. It
is necessary for node-hot-add vs. cpu-hot-add patch following this.
Moreover, register_cpu calculates cpu->node_id by cpu_to_node() without regard
to its 'struct node *root' argument. This patch removes it.
Also modify callers of register_cpu()/unregister_cpu, whose args are changed
by register-cpu-remove-node-struct patch.
[[email protected]: fix it]
Signed-off-by: KAMEZAWA Hiroyuki <[email protected]>
Cc: Yasunori Goto <[email protected]>
Cc: Ashok Raj <[email protected]>
Cc: Dave Hansen <[email protected]>
Signed-off-by: Brice Goglin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
This is a patch to allocate pgdat and per node data area for ia64. The size
for them can be calculated by compute_pernodesize().
Signed-off-by: Yasunori Goto <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
This is to refresh node_data[] array for ia64. As I mentioned previous
patches, ia64 has copies of information of pgdat address array on each node as
per node data.
At v2 of node_add, this function used stop_machine_run() to update them. (I
wished that they were copied safety as much as possible.) But, in this patch,
this arrays are just copied simply, and set node_online_map bit after
completion of pgdat initialization.
So, kernel must touch NODE_DATA() macro after checking node_online_map().
(Current code has already done it.) This is more simple way for just
hot-add.....
Note : It will be problem when hot-remove will occur,
because, even if online_map bit is set, kernel may
touch NODE_DATA() due to race condition. :-(
Signed-off-by: Yasunori Goto <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
This is a preparatory patch to make common code for updating of NODE_DATA() of
ia64 between boottime and hotplug.
Current code remembers pgdat address in mem_data which is used at just boot
time. But its information can be used at hotplug time by moving to global
value. The next patch uses this array.
Signed-off-by: Yasunori Goto <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
When new node becomes enable by hot-add, new sysfs file must be created for
new node. So, if new node is enabled by add_memory(), register_one_node() is
called to create it. In addition, I386's arch_register_node() and a part of
register_nodes() of powerpc are consolidated to register_one_node() as a
generic_code().
This is tested by Tiger4(IPF) with node hot-plug emulation.
Signed-off-by: Keiichiro Tokunaga <[email protected]>
Signed-off-by: Yasunori Goto <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Fix "undefined reference to `arch_add_memory'" on sparc64 allmodconfig.
sparc64 doesn't support memory hotplug. But we want it to support
sparsemem.
Signed-off-by: Yasunori Goto <[email protected]>
Cc: "David S. Miller" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
This patch allows hot-add memory which is not aligned to section.
Now, hot-added memory has to be aligned to section size. Considering big
section sized archs, this is not useful.
When hot-added memory is registerd as iomem resoruce by iomem resource
patch, we can make use of that information to detect valid memory range.
Note: With this, not-aligned memory can be registerd. To allow hot-add
memory with holes, we have to do more work around add_memory().
(It doesn't allows add memory to already existing mem section.)
Signed-off-by: KAMEZAWA Hiroyuki <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Register hot-added memory to iomem_resource. With this, /proc/iomem can
show hot-added memory.
Note: kdump uses /proc/iomem to catch memory range when it is installed.
So, kdump should be re-installed after /proc/iomem change.
Signed-off-by: KAMEZAWA Hiroyuki <[email protected]>
Cc: Vivek Goyal <[email protected]>
Cc: Greg KH <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Add node-hot-add support to add_memory().
node hotadd uses this sequence.
1. allocate pgdat.
2. refresh NODE_DATA()
3. call free_area_init_node() to initialize
4. create sysfs entry
5. add memory (old add_memory())
6. set node online
7. run kswapd for new node.
(8). update zonelist after pages are onlined. (This is already merged in -mm
due to update phase is difference.)
Note:
To make common function as much as possible,
there is 2 changes from v2.
- The old add_memory(), which is defiend by each archs,
is renamed to arch_add_memory(). New add_memory becomes
caller of arch dependent function as a common code.
- This patch changes add_memory()'s interface
From: add_memory(start, end)
TO : add_memory(nid, start, end).
It was cause of similar code that finding node id from
physical address is inside of old add_memory() on each arch.
In addition, acpi memory hotplug driver can find node id easier.
In v2, it must walk DSDT'S _CRS by matching physical address to
get the handle of its memory device, then get _PXM and node id.
Because input is just physical address.
However, in v3, the acpi driver can use handle to get _PXM and node id
for the new memory device. It can pass just node id to add_memory().
Fix interface of arch_add_memory() is in next patche.
Signed-off-by: Yasunori Goto <[email protected]>
Signed-off-by: KAMEZAWA Hiroyuki <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "Brown, Len" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
When node is hot-added, kswapd for the node should start. This export kswapd
start function as kswapd_run() to use at add_memory().
[[email protected]: daemonize() isn't needed when using the kthread API]
Signed-off-by: Yasunori Goto <[email protected]>
Signed-off-by: KAMEZAWA Hiroyuki <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "Brown, Len" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
For node hotplug, basically we have to allocate new pgdat. But, there are
several types of implementations of pgdat.
1. Allocate only pgdat.
This style allocate only pgdat area.
And its address is recorded in node_data[].
It is most popular style.
2. Static array of pgdat
In this case, all of pgdats are static array.
Some archs use this style.
3. Allocate not only pgdat, but also per node data.
To increase performance, each node has copy of some data as
a per node data. So, this area must be allocated too.
Ia64 is this style. Ia64 has the copies of node_data[] array
on each per node data to increase performance.
In this series of patches, treat (1) as generic arch.
generic archs can use generic function. (2) and (3) should have
its own if necessary.
This patch defines pgdat allocator.
Updating NODE_DATA() macro function is in other patch.
Signed-off-by: Yasonori Goto <[email protected]>
Signed-off-by: KAMEZAWA Hiroyuki <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "Brown, Len" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
This is to find node id from acpi's handle of memory_device in DSDT. _PXM for
the new node can be found by acpi_get_pxm() by using new memory's handle. So,
node id can be found by pxm_to_nid_map[].
This patch becomes simpler than v2 of node hot-add patch.
Because old add_memory() function doesn't have node id parameter.
So, kernel must find its handle by physical address via DSDT again.
But, v3 just give node id to add_memory() now.
Signed-off-by: Yasunori Goto <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "Brown, Len" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Change the name of old add_memory() to arch_add_memory. And use node id to
get pgdat for the node at NODE_DATA().
Note: Powerpc's old add_memory() is defined as __devinit. However,
add_memory() is usually called only after bootup.
I suppose it may be redundant. But, I'm not well known about powerpc.
So, I keep it. (But, __meminit is better at least.)
Signed-off-by: Yasunori Goto <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "Brown, Len" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
When acpi_memory_device_init() is called at boottime to register struct
memory acpi_memory_device, acpi_bus_add() are called via
acpi_driver_attach().
But it also calls ops->start() function. It is called even if the memory
blocks are initialized at early boottime. In this case add_memory() return
-EEXIST, and the memory blocks becomes INVALID state even if it is normal.
This is patch to avoid calling add_memory() for already available memory.
[[email protected]: coding cleanups]
Signed-off-by: Yasunori Goto <[email protected]>
Cc: "Brown, Len" <[email protected]>
Cc: Dave Hansen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
This is a patch to call add_memroy() when notify reaches for new node's add
event.
When new node is added, notify of ACPI reaches container device which means
the node.
Container device driver calls acpi_bus_scan() to find and add belonging
devices (which means cpu, memory and so on). Its function calls add and
start function of belonging devices's driver.
Howevever, current memory hotplug driver just register add function to
create sysfs file for its memory. But, acpi_memory_enable_device() is not
called because it is considered just the case that notify reaches memory
device directly. So, if notify reaches container device nothing can call
add_memory().
This is a patch to create start function which calls add_memory().
add_memory() can be called by this when notify reaches container device.
[[email protected]: coding cleanups]
Signed-off-by: Yasunori Goto <[email protected]>
Cc: "Brown, Len" <[email protected]>
Cc: Dave Hansen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Current acpi memory hotplug just looks into the first entry of resources in
_CRS. But, _CRS can contain plural resources. So, if _CRS contains plural
resoureces, acpi memory hot add cannot add all memory.
With this patch, acpi memory hotplug can deal with Memory Device, whose
_CRS contains plural resources.
Tested on ia64 memory hotplug test envrionment (not emulation, uses alpha
version firmware which supports dynamic reconfiguration of NUMA.)
Note: Microsoft's Windows Server 2003 requires big (>4G)resoureces to be
divided into small (<4G) resources. looks crazy, but not invalid.
(See http://www.microsoft.com/whdc/system/pnppwr/hotadd/hotaddmem.mspx)
For this reason, a firmware vendor who supports Windows writes plural
resources in a _CRS even if they are contiguous.
Signed-off-by: Kenji Kaneshige <[email protected]>
Signed-off-by: KAMEZAWA Hiroyuki <[email protected]>
Cc: "Brown, Len" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
CONFIG_PM_TRACES scrogs your RTC. Mark it as experimental, and defaulting to
`off'.
Also beef up the help message a bit.
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Fix function definitions to be ANSI-compliant:
lib/zlib_inflate/inffast.c:68:1: warning: non-ANSI definition of function 'inflate_fast'
lib/zlib_inflate/inftrees.c:33:1: warning: non-ANSI definition of function 'zlib_inflate_table'
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
kernel/acct.c:579:19: warning: non-ANSI function declaration of function 'acct_process'
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Builds on ARM report link problems with common configurations like
statically linked NFS (for nfsroot). The symptom is that __init
section code references __exit section code; that won't work since
the exit sections are discarded (since they can never be called).
The best fix for these particular cases would be an "__init_or_exit"
section annotation.
Signed-off-by: David Brownell <[email protected]>
Acked-by: Trond Myklebust <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
It should be done before calling class_device_unregister() because
it will destroy the device and free memory if there are no other
references to the device.
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
This reverts commit e5c44fd88c.
Thanks to Daniel Ritz and Michal Piotrowski for noticing the problem.
Daniel says:
"[The] reason is a recent change that made modules always shows as
module.mod. it breaks modprobe and probably many scripts..besides
lsmod looking horrible
stuff like this in modprobe.conf:
install pcmcia_core /sbin/modprobe --ignore-install pcmcia_core; /sbin/modprobe pcmcia
makes modprobe fork/exec endlessly calling itself...until oom
interrupts it"
Signed-off-by: Linus Torvalds <[email protected]>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (56 commits)
[PATCH] fs/ocfs2/dlm/: cleanups
ocfs2: fix compiler warnings in dlm_convert_lock_handler()
ocfs2: dlm_print_one_mle() needs to be defined
ocfs2: remove whitespace in dlmunlock.c
ocfs2: move dlm work to a private work queue
ocfs2: fix incorrect error returns
ocfs2: tune down some noisy messages during dlm recovery
ocfs2: display message before waiting for recovery to complete
ocfs2: mlog in dlm_convert_lock_handler() should be ML_ERROR
ocfs2: retry operations when a lock is marked in recovery
ocfs2: use cond_resched() in dlm_thread()
ocfs2: use GFP_NOFS in some dlm operations
ocfs2: wait for recovery when starting lock mastery
ocfs2: continue recovery when a dead node is encountered
ocfs2: remove unneccesary spin_unlock() in dlm_remaster_locks()
ocfs2: dlm_remaster_locks() should never exit without completing
ocfs2: special case recovery lock in dlmlock_remote()
ocfs2: pending mastery asserts and migrations should block each other
ocfs2: temporarily disable automatic lock migration
ocfs2: do not unconditionally purge the lockres in dlmlock_remote()
...
Patch from Ben Dooks
Update the list of supported devices, and remove the
changelog. Add SMDK2413 information.--
Signed-off-by: Ben Dooks <[email protected]>Signed-off-by: Russell King <[email protected]>
This patch #if 0's the no longer used dlm_dump_lock_resources().
Since this makes dlmdebug.h empty, this patch also removes this header.
Additionally, the needlessly global dlm_is_node_recovered() is made
static.
Signed-off-by: Adrian Bunk <[email protected]>
Signed-off-by: Mark Fasheh <[email protected]>
The work that is done can block for long periods of time and so is not
appropriate for keventd.
Signed-off-by: Kurt Hackel <[email protected]>
Signed-off-by: Mark Fasheh <[email protected]>
Before checking for a nonexistent lock, make sure the lockres is not marked
RECOVERING. The caller will just retry and the state should be fixed up when
recovery completes.
Signed-off-by: Kurt Hackel <[email protected]>
Signed-off-by: Mark Fasheh <[email protected]>
James Bottomley