Pull tty / serial updates from Greg KH:
"Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more
cleanups on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
tty: serial: uartlite: Use read_poll_timeout for a polling loop
tty: serial: uartlite: Use constants in early_uartlite_putc
tty: Fix data race between tiocsti() and flush_to_ldisc()
serial: vt8500: Use of_device_get_match_data
serial: tegra: Use of_device_get_match_data
serial: 8250_ingenic: Use of_device_get_match_data
tty: serial: linflexuart: Remove redundant check to simplify the code
tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
tty: serial: fsl_lpuart: enable two stop bits for lpuart32
tty: serial: fsl_lpuart: fix the wrong mapbase value
mxser: use semi-colons instead of commas
tty: moxa: use semi-colons instead of commas
tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
tty: replace in_irq() with in_hardirq()
serial: sh-sci: fix break handling for sysrq
serial: stm32: use devm_platform_get_and_ioremap_resource()
serial: stm32: use the defined variable to simplify code
Revert "arm pl011 serial: support multi-irq request"
tty: serial: samsung: Add Exynos850 SoC data
tty: serial: samsung: Fix driver data macros style
...
The same as for I²C Serial Bus resource split and export
serdev_acpi_get_uart_resource(). We have already a few users
one of which is converted here.
Rationale of this is to consolidate parsing UART Serial Bus
resource in one place as it's done, e.g., for I²C Serial Bus.
Reviewed-by: Hans de Goede <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <[email protected]> (For fpga)
Reviewed-by: Mathieu Poirier <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <[email protected]> (For ARM, Amba and related parts)
Acked-by: Mark Brown <[email protected]>
Acked-by: Chen-Yu Tsai <[email protected]> (for sunxi-rsb)
Acked-by: Pali Rohár <[email protected]>
Acked-by: Mauro Carvalho Chehab <[email protected]> (for media)
Acked-by: Hans de Goede <[email protected]> (For drivers/platform)
Acked-by: Alexandre Belloni <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Acked-by: Juergen Gross <[email protected]> (For xen)
Acked-by: Lee Jones <[email protected]> (For mfd)
Acked-by: Johannes Thumshirn <[email protected]> (For mcb)
Acked-by: Johan Hovold <[email protected]>
Acked-by: Srinivas Kandagatla <[email protected]> (For slimbus)
Acked-by: Kirti Wankhede <[email protected]> (For vfio)
Acked-by: Maximilian Luz <[email protected]>
Acked-by: Heikki Krogerus <[email protected]> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <[email protected]> (For ipack)
Acked-by: Geoff Levand <[email protected]> (For ps3)
Acked-by: Yehezkel Bernat <[email protected]> (For thunderbolt)
Acked-by: Alexander Shishkin <[email protected]> (For intel_th)
Acked-by: Dominik Brodowski <[email protected]> (For pcmcia)
Acked-by: Rafael J. Wysocki <[email protected]> (For ACPI)
Acked-by: Bjorn Andersson <[email protected]> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <[email protected]> (For intel-ish-hid)
Acked-by: Dan Williams <[email protected]> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <[email protected]> (For isa)
Acked-by: Stefan Richter <[email protected]> (For firewire)
Acked-by: Benjamin Tissoires <[email protected]> (For hid)
Acked-by: Thorsten Scherer <[email protected]> (For siox)
Acked-by: Sven Van Asbroeck <[email protected]> (For anybuss)
Acked-by: Ulf Hansson <[email protected]> (For MMC)
Acked-by: Wolfram Sang <[email protected]> # for I2C
Acked-by: Sudeep Holla <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Acked-by: Finn Thain <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
On Apple devices the _CRS method returns an empty resource template, and
the resource settings are instead provided by the _DSM method. But
commit 33364d63c7 (serdev: Add ACPI
devices by ResourceSource field) changed the search for serdev devices
to require valid, non-empty resource template, thereby breaking Apple
devices and causing bluetooth devices to not be found.
This expands the check so that if we don't find a valid template, and
we're on an Apple machine, then just check for the device being an
immediate child of the controller and having a "baud" property.
Cc: <[email protected]> # 5.5
Fixes: 33364d63c7 ("serdev: Add ACPI devices by ResourceSource field")
Signed-off-by: Ronald Tschalär <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Serdev sub-system claims all ACPI serial devices that are not already
initialised. As a result, no device node is created for serial ports
on certain boards such as the Apollo Lake based UP2. This has the
unintended consequence of not being able to raise the login prompt via
serial connection.
Introduce a blacklist to reject ACPI serial devices that should not be
claimed by serdev sub-system. Add the peripheral ids for Intel HS UART
to the blacklist to bring back serial port on SoCs carrying them.
Cc: [email protected]
Signed-off-by: Punit Agrawal <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Acked-by: Johan Hovold <[email protected]>
Cc: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
With %pe the symbolic name is printed, so you get
failure adding device. status -EIO
which is more expressive than the current state
failure adding device. status -5
.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
When registering a serdev controller, ACPI needs to be checked for
devices attached to it. Currently, all immediate children of the ACPI
node of the controller are assumed to be UART client devices for this
controller. Furthermore, these devices are not searched elsewhere.
This is incorrect: Similar to SPI and I2C devices, the UART client
device definition (via UARTSerialBusV2) can reside anywhere in the ACPI
namespace as resource definition inside the _CRS method and points to
the controller via its ResourceSource field. This field may either
contain a fully qualified or relative path, indicating the controller
device. To address this, we need to walk over the whole ACPI namespace,
looking at each resource definition, and match the client device to the
controller via this field.
This patch is based on the existing acpi serial bus implementations in
drivers/i2c/i2c-core-acpi.c and drivers/spi/spi.c, specifically commit
4c3c59544f ("spi/acpi: enumerate all SPI
slaves in the namespace").
Signed-off-by: Maximilian Luz <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Tested-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Document the asynchronous serdev_device_write_buf() and synchronous
serdev_device_write() functions using kernel-doc.
Specifically, mention that writing data only means that data has been
buffered by the controller, and that the synchronous helper depends on
serdev_device_write_wakeup() being called in the driver write_wakeup()
callback.
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Allow the synchronous serdev_device_write() helper to be interrupted.
This is useful for cases where I/O is performed on behalf of user space
and we don't want to block indefinitely when using flow control.
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Make the synchronous serdev_device_write() helper behave analogous to
the asynchronous serdev_device_write_buf() by returning the number of
bytes written (or rather buffered) also on timeout.
This will allow drivers to distinguish the case where data was partially
written from the case where no data was written.
Also update the only two users that checked the return value.
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Use zero to indicate infinite timeout for the synchronous
serdev_device_write() helper.
This allows drivers to specify an infinite timeout without knowing about
serdev implementation details, while also allowing the same timeout
argument to be used for both serdev_device_write() and
serdev_device_wait_until_sent().
Note that passing zero to the current helper makes no sense; just call
the asynchronous serdev_device_write_buf() directly instead.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
In order to open up the required power gate before any operation can be
effectively performed over the serial bus between CPU and serdev, it's
clearly essential to add common attach functions for PM domains to serdev
at the probe phase.
Similarly, the relevant dettach function for the PM domains should be
properly and reversely added at the remove phase.
Signed-off-by: Sean Wang <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Make sure to free all resources associated with the ida on module
exit.
Fixes: cd6484e183 ("serdev: Introduce new bus for serial attached devices")
Cc: stable <[email protected]> # 4.11
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Add support for controller runtime power management to serdev core. This
is needed to allow slave drivers to manage the runtime PM state of the
underlying serial controller when its driver, in turn, implements more
aggressive runtime power management (e.g. using autosuspend).
For some applications, for example, where loss off initial data after a
remote-wakeup event is acceptable or where rx is not used at all,
aggressive serial controller runtime PM may be used without further
involvement of the slave driver. But when this is not the case, the
slave driver must be able to indicate when incoming data is expected in
order to avoid data loss.
To facilitate the common case, where the serial controller power state
is active whenever the port is open (which is the case with just about
every serial driver), and where data loss is not acceptable and cannot
even be prevented by explicit controller runtime power management, an
RPM reference is taken in serdev open and put again at close. This
reference can later be balanced by any serdev driver which wants and/or
can handle aggressive controller runtime PM.
Note that the .ignore_children flag is set for the serdev controller to
allow the underlying hardware to idle when no I/O is expected, regardless
of the slave device RPM state.
Acked-by: Tony Lindgren <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Pull tty/staging driver updates from Greg KH:
"Here is the big tty/serial driver update for 4.16-rc1.
The usual number of various serial driver fixes and updates to try to
get them to work with crazy hardware configurations (seriously, how
many different ways are hardware engineers going to come up with to
hook up a simple UART?)
There is also some serdev bugfixes and updates, as well as a
smattering of other small fixes in here.
All have been in the linux-next tree for a while, with no reported
issues"
* tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
tty: serial: exar: Relocate sleep wake-up handling
tty: fix data race between tty_init_dev and flush of buf
serial: imx: fix endless loop during suspend
serial: core: mark port as initialized after successful IRQ change
serdev: only match serdev devices
serdev: do not generate modaliases for controllers
serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction
serial: 8250_dw: Revert "Improve clock rate setting"
MAINTAINERS: Add myself as designated reviewer for 8250_dw
gpio: serial: max310x: Support open-drain configuration for GPIOs
serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllers
serial: 8250_ingenic: Parse earlycon options
serial: 8250_ingenic: Add support for the JZ4770 SoC
serial: core: Make uart_parse_options take const char* argument
serial: 8250_of: fix return code when probe function fails to get reset
serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS
serial: 8250_uniphier: fix error return code in uniphier_uart_probe()
tty: n_gsm: Allow ADM response in addition to UA for control dlci
tty: omap-serial: Fix initial on-boot RTS GPIO level
tty: serial: jsm: Add one check against NULL pointer dereference
...
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
Adds serdev_device_set_parity() and an implementation for ttyport.
The interface uses an enum with the values SERIAL_PARITY_NONE,
SERIAL_PARITY_EVEN and SERIAL_PARITY_ODD.
Signed-off-by: Ulrich Hecht <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Only serdev devices (a.k.a. clients or slaves) are bound to drivers so
bail out early from match() in case the device is not a serdev device
(i.e. if it's a serdev controller).
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Serdev controllers are not bound to any drivers and it therefore makes
no sense to generate modaliases for them.
This has already been fixed separately for ACPI controllers for which
uevent errors were also being logged during probe due to the missing
ACPI companions (from which ACPI modaliases are generated).
This patch moves the modalias handling from the bus type to the client
device type. Specifically, this means that only serdev devices (a.k.a.
clients or slaves) will have have MODALIAS fields in their uevent
environments and corresponding modalias sysfs attributes.
Also add the missing static keyword for the modalias device attribute
when moving the definition.
Reported-by: Hans de Goede <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ACPI enumerated serdev-controllers do not have an ACPI companion, the ACPI
companion belongs to the serdev-device child of the serdev-controller, not
to the controller itself. This was causing serdev_uevent to always return
-ENODEV when called on a serdev-controller leading to errors like these:
kernel: serial serial0: uevent: failed to send synthetic uevent
being logged. This commit modifies serdev_uevent to directly return 0
when called on an ACPI enumerated serdev-controller fixing this.
Note: I do not think that setting a modalias on a devicetree enumerated
serdev-controller makes sense either. So perhaps the !dev->of_node part of
the check can be dropped too, but I'm not entirely sure that doing this
on devicetree too is correct.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Add code implementing managed version of serdev_device_open() for
serdev device drivers that "open" the device during driver's lifecycle
only once (e.g. opened in .probe() and closed in .remove()).
Acked-by: Philippe Ombredanne <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Andrey Smirnov <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Using devres infrastructure it is possible to write a serdev driver
that doesn't have any code that needs to be called as a part of
.remove. Add code to make .remove optional.
Acked-by: Philippe Ombredanne <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Andrey Smirnov <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Now that the SPDX tag is in all tty files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Rob Herring <[email protected]>
Cc: Jiri Slaby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Reorder controller initialisation so that in the unlikely event that id
allocation fails, we don't end up releasing id 0 in the destructor.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Serdev currently only supports a single slave device, but the required
sanity checks to prevent further registration attempts were missing.
If a serial-port node has two child nodes with compatible properties,
the OF code would try to register two slave devices using the same id
and name. Driver core will not allow this (and there will be loud
complaints), but the controller's slave pointer would already have been
set to address of the soon to be deallocated second struct
serdev_device. As the first slave device remains registered, this can
lead to later use-after-free issues when the slave callbacks are
accessed.
Note that while the serdev registration helpers are exported, they are
typically only called by serdev core. Any other (out-of-tree) callers
must serialise registration and deregistration themselves.
Fixes: cd6484e183 ("serdev: Introduce new bus for serial attached devices")
Cc: stable <[email protected]> # 4.11
Cc: Rob Herring <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
This patch allows SerDev module to manage serial devices declared as
attached to an UART in ACPI table.
acpi_serdev_add_device() callback will only take into account entries
without enumerated flag set. This flags is set for all entries during
ACPI scan, except for SPI and I2C serial devices, and for UART with
2nd patch in the series.
Check if a serdev device as been allocated during acpi_walk_namespace()
to prevent serdev controller registration instead of the tty-class device.
Signed-off-by: Frédéric Danis <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Pull driver core updates from Greg KH:
"Here is the big driver core update for 4.13-rc1.
The large majority of this is a lot of cleanup of old fields in the
driver core structures and their remaining usages in random drivers.
All of those fixes have been reviewed by the various subsystem
maintainers. There's also some small firmware updates in here, a new
kobject uevent api interface that makes userspace interaction easier,
and a few other minor things.
All of these have been in linux-next for a long while with no reported
issues"
* tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits)
arm: mach-rpc: ecard: fix build error
zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()
driver-core: remove struct bus_type.dev_attrs
powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type
powerpc: vio: use dev_groups and not dev_attrs for bus_type
USB: usbip: convert to use DRIVER_ATTR_RW
s390: drivers: convert to use DRIVER_ATTR_RO/WO
platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW
pcmcia: ds: convert to use DRIVER_ATTR_RO
wireless: ipw2x00: convert to use DRIVER_ATTR_RW
net: ehea: convert to use DRIVER_ATTR_RO
net: caif: convert to use DRIVER_ATTR_RO
TTY: hvc: convert to use DRIVER_ATTR_RW
PCI: pci-driver: convert to use DRIVER_ATTR_WO
IB: nes: convert to use DRIVER_ATTR_RW
HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups
arm: ecard: fix dev_groups patch typo
tty: serdev: use dev_groups and not dev_attrs for bus_type
sparc: vio: use dev_groups and not dev_attrs for bus_type
hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type
...
The dev_attrs field has long been "depreciated" and is finally being
removed, so move the driver to use the "correct" dev_groups field
instead for struct bus_type.
Cc: Rob Herring <[email protected]>
Cc: Jiri Slaby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Starting with commit 6fe729c4bd ("serdev: Add serdev_device_write
subroutine") the function serdev_device_write_buf cannot be used in
atomic context anymore (mutex_lock is sleeping). So restore the old
behavior.
Signed-off-by: Stefan Wahren <[email protected]>
Fixes: 6fe729c4bd ("serdev: Add serdev_device_write subroutine")
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Pull tty/serial updates from Greg KH:
"Here is the "big" TTY/Serial patch updates for 4.12-rc1
Not a lot of new things here, the normal number of serial driver
updates and additions, tiny bugs fixed, and some core files split up
to make future changes a bit easier for Nicolas's "tiny-tty" work.
All of these have been in linux-next for a while"
* tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (62 commits)
serial: small Makefile reordering
tty: split job control support into a file of its own
tty: move baudrate handling code to a file of its own
console: move console_init() out of tty_io.c
serial: 8250_early: Add earlycon support for Palmchip UART
tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44
vt: make mouse selection of non-ASCII consistent
vt: set mouse selection word-chars to gpm's default
imx-serial: Reduce RX DMA startup latency when opening for reading
serial: omap: suspend device on probe errors
serial: omap: fix runtime-pm handling on unbind
tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init
serial: samsung: Remove useless spinlock
serial: samsung: Add missing checks for dma_map_single failure
serial: samsung: Use right device for DMA-mapping calls
serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off
tty: fix comment typo s/repsonsible/responsible/
tty: amba-pl011: Fix spurious TX interrupts
serial: xuartps: Enable clocks in the pm disable case also
serial: core: Re-use struct uart_port {name} field
...
Pull DeviceTree updates from Rob Herring:
- fix sparse warnings in drivers/of/
- add more overlay unittests
- update dtc to v1.4.4-8-g756ffc4f52f6. This adds more checks on dts
files such as unit-address formatting and stricter character sets for
node and property names
- add a common DT modalias function
- move trivial-devices.txt up and out of i2c dir
- ARM NVIC interrupt controller binding
- vendor prefixes for Sensirion, Dioo, Nordic, ROHM
- correct some binding file locations
* tag 'devicetree-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (24 commits)
of: fix sparse warnings in fdt, irq, reserved mem, and resolver code
of: fix sparse warning in of_pci_range_parser_one
of: fix sparse warnings in of_find_next_cache_node
of/unittest: Missing unlocks on error
of: fix uninitialized variable warning for overlay test
of: fix unittest build without CONFIG_OF_OVERLAY
of: Add unit tests for applying overlays
of: per-file dtc compiler flags
fpga: region: add missing DT documentation for config complete timeout
of: Add vendor prefix for ROHM Semiconductor
of: fix "/cpus" reference leak in of_numa_parse_cpu_nodes()
of: Add vendor prefix for Nordic Semiconductor
dt-bindings: arm,nvic: Binding for ARM NVIC interrupt controller on Cortex-M
dtc: update warning settings for new bus and node/property name checks
scripts/dtc: Update to upstream version v1.4.4-8-g756ffc4f52f6
scripts/dtc: automate getting dtc version and log in update script
of: Add function for generating a DT modalias with a newline
of: fix of_device_get_modalias returned length when truncating buffers
Documentation: devicetree: move trivial-devices out of I2C realm
dt-bindings: add vendor prefix for Dioo
..
Add method, which waits until the transmission buffer has been sent.
Note, that the change in ttyport_write_wakeup is related, since
tty_wait_until_sent will hang without that change.
Acked-by: Rob Herring <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Add serdev_device_write() a blocking call allowing to transfer
arbitraty amount of data (potentially exceeding amount that
serdev_device_write_buf can process in a single call)
To support that, also add serdev_device_write_wakeup().
Drivers wanting to use full extent of serdev_device_write
functionality are expected to provide serdev_device_write_wakeup() as
a sole handler of .write_wakeup event or call it as a part of driver's
custom .write_wakeup code.
Because serdev_device_write() subroutine is a superset of
serdev_device_write_buf() the patch re-impelements latter is terms of
the former. For drivers wanting to just use serdev_device_write_buf()
.write_wakeup handler is optional.
Cc: [email protected]
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Andrey Smirnov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
The modalias sysfs attr is lacking a newline for DT aliases on platform
devices. The macio and ibmebus correctly add the newline, but open code it.
Introduce a new function, of_device_modalias(), that fills the buffer with
the modalias including the newline and update users of the old
of_device_get_modalias function.
Signed-off-by: Rob Herring <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Frank Rowand <[email protected]>
Cc: [email protected]
Acked-by: Greg Kroah-Hartman <[email protected]>
The serdev bus is designed for devices such as Bluetooth, WiFi, GPS
and NFC connected to UARTs on host processors. Tradionally these have
been handled with tty line disciplines, rfkill, and userspace glue such
as hciattach. This approach has many drawbacks since it doesn't fit
into the Linux driver model. Handling of sideband signals, power control
and firmware loading are the main issues.
This creates a serdev bus with controllers (i.e. host serial ports) and
attached devices. Typically, these are point to point connections, but
some devices have muxing protocols or a h/w mux is conceivable. Any
muxing is not yet supported with the serdev bus.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-By: Sebastian Reichel <[email protected]>
Tested-By: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Linus Torvalds