Touch devices capable of hovering, i.e., fingers detected a
distance from the surface, are not supported by the current
input MT protocol. This patch adds ABS_MT_DISTANCE, which may
be used to indicate the distance between the contact and the
surface.
Signed-off-by: Henrik Rydberg <[email protected]>
Add support for CMA3000 Tri-axis accelerometer, which supports Motion
detect, Measurement and Free fall modes. CMA3000 supports both I2C/SPI
bus for communication, currently the driver supports I2C based
communication.
Signed-off-by: Hemanth V <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Sergio Aguirre <[email protected]>
Reviewed-by: Shubhrajyoti <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
The doctumentation includes a brief introduction to the driver and
explanations of the filtering parameters as well as a discussion
of the need for and working of the filters.
Signed-off-by: Rafi Rubin <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.
Signed-off-by: Justin P. Mattock <[email protected]>
Signed-off-by: Thomas Weber <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>
Cc: Paulo Marques <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Michael Neuling <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
This patch adds documentation for the ABS_MT_SLOT event and gives
examples of how to use the event slot protocol.
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Henrik Rydberg <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
vlynq: make whole Kconfig-menu dependant on architecture
add descriptive comment for TIF_MEMDIE task flag declaration.
EEPROM: max6875: Header file cleanup
EEPROM: 93cx6: Header file cleanup
EEPROM: Header file cleanup
agp: use NULL instead of 0 when pointer is needed
rtc-v3020: make bitfield unsigned
PCI: make bitfield unsigned
jbd2: use NULL instead of 0 when pointer is needed
cciss: fix shadows sparse warning
doc: inode uses a mutex instead of a semaphore.
uml: i386: Avoid redefinition of NR_syscalls
fix "seperate" typos in comments
cocbalt_lcdfb: correct sections
doc: Change urls for sparse
Powerpc: wii: Fix typo in comment
i2o: cleanup some exit paths
Documentation/: it's -> its where appropriate
UML: Fix compiler warning due to missing task_struct declaration
UML: add kernel.h include to signal.c
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: joydev - allow binding to button-only devices
Input: elantech - ignore high bits in the position coordinates
Input: elantech - allow forcing Elantech protocol
Input: elantech - fix firmware version check
Input: ati_remote - add some missing devices from lirc_atiusb
Input: eeti_ts - cancel pending work when going to suspend
Input: Add support of Synaptics Clickpad device
Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops"
Input: psmouse - ignore parity error for basic protocols
In older versions of the elantech hardware/firmware those bits always
were unset, so it didn't actually matter, but newer versions seem to
use those high bits for something else, screwing up the coordinates
we report to the input layer for those devices.
Signed-off-by: Florian Ragwitz <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: wacom - switch mode upon system resume
Revert "Input: wacom - merge out and in prox events"
Input: matrix_keypad - allow platform to disable key autorepeat
Input: ALPS - add signature for HP Pavilion dm3 laptops
Input: i8042 - spelling fix
Input: sparse-keymap - implement safer freeing of the keymap
Input: update the status of the Multitouch X driver project
Input: clarify the no-finger event in multitouch protocol
Input: bcm5974 - retract efi-broken suspend_resume
Input: sparse-keymap - free the right keymap on error
The Multitouch X driver project has moved to alpha status.
This patch updates the documentation accordingly.
Signed-off-by: Henrik Rydberg <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
The current documentation does not explicitly specify how to report
zero fingers, leaving a potential problem in the driver implementations
and giving no parsing directive to userland. This patch defines two
equally valid ways.
Signed-off-by: Henrik Rydberg <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Junio C Hamano <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
This patch documents a new ABS_MT parameter and adds further text to
clarify some points around the MT protocol.
Requested-by: Yoonyoung Shim <[email protected]>
Requested-by: Mika Kuoppala <[email protected]>
Requested-by: Peter Hutterer <[email protected]>
Signed-off-by: Henrik Rydberg <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
This is the driver for Sentelic Finger Sensing Pad which can be found
on MSI WIND Netbook.
Signed-off-by: Tai-hwa Liang <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Through the collaboration to adapt the N-trig and Stantum HID
drivers to the MT protocol, some semantic clarifications to the
protocol have been made. This patch adds them to the MT documentation.
Signed-off-by: Henrik Rydberg <[email protected]>
Tested-by: Stéphane Chatty <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
This patchs adds documentation for the multi-touch protocol to
Documentation/input/.
[[email protected]: grammar fixes]
Signed-off-by: Henrik Rydberg <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
This patch adds documentation for the bcm5974 to Documentation/input/.
Signed-off-by: Henrik Rydberg <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
The rotary encoder driver only supports returning input events
for ABS_* axes, this adds support for REL_* axes. The relative
axis input event is reported as -1 for each counter-clockwise
step and +1 for each clockwise step.
The ability to clamp the position of ABS_* axes between 0 and
a maximum of "steps" has also been added.
Signed-off-by: H Hartley Sweeten <[email protected]>
Signed-off-by: Daniel Mack <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
This patch adds a generic driver for rotary encoders connected to GPIO
pins of a system. It relies on gpiolib and generic hardware irqs. The
documentation that also comes with this patch explains the concept and
how to use the driver.
Signed-off-by: Daniel Mack <[email protected]>
Tested-by: H Hartley Sweeten <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
This patch fixes a wrong interrupt handler example given in the "Hello,
world!"-like input driver in Documentation/input/input-programming.txt.
Signed-off-by: Dmitri Vorobiev <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
This is version 5 of the driver. Relative mode support has been
dropped (users wishing to use touchpad in relative mode can use
standard PS/2 protocol emulation done in hardware). The driver
supports both original version of Elantech protocol and the newer
one used by touchpads installed in EeePC.
Signed-off-by: Arjan Opmeer <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
This patch removes CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: Adrian Bunk <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
The input example driver uses BTN_0 in the later stages of the
example, so this changes the interrupt routine to match.
Signed-off-by: Steven Whitehouse <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Most of these fixes were already submitted for old kernel versions, and were
approved, but for some reason they never made it into the releases.
Because this is a consolidation of a couple old missed patches, it touches both
Kconfigs and documentation texts.
Signed-off-by: Matt LaPlante <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
Changed email address of Johann Deneux (myself)
Also removed CVS tags in comments (no longer using cvs)
Signed-off-by: Johann Deneux <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
get rid of input BIT* duplicate defines
use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)
Signed-off-by: Jiri Slaby <[email protected]>
Cc: <[email protected]>
Acked-by: Jiri Kosina <[email protected]>
Cc: <[email protected]>
Acked-by: Marcel Holtmann <[email protected]>
Cc: <[email protected]>
Acked-by: Mauro Carvalho Chehab <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Emil Medve points out that this documentation file uses CRLF line
endings, which means that if you use
[core]
autocrlf=input
(which makes sense if you ever develop under Windows, for example, or if
you use other broken tools) in your git config, git will always complain
about the file being dirty.
This removes the bogus DOS line endings, and removes whitespace at the
end of line.
Cc: Emil Medve <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Fix various typos in kernel docs and Kconfigs, 2.6.21-rc4.
Signed-off-by: Matt LaPlante <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
This patch fixes typos in various Documentation txts. The patch addresses some
misc words.
Signed-off-by: Matt LaPlante <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
This patch fixes typos in various Documentation txts. The patch addresses some
+words starting with the letters 'U-Z'.
Looks like I made it through the alphabet...just in time to start over again
+too! Maybe I can fit more profound fixes into the next round...? Time will
+tell. :)
Signed-off-by: Matt LaPlante <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
Adds support for dance pads to the xpad driver. Dance pads require the
d-pad to be mapped to four buttons instead of two axes, so that
combinations of up/down and left/right can be hit simultaneously.
Known dance pads are detected, and there is a module parameter added
to default unknown xpad devices to map the d-pad to buttons if this is
desired. (dpad_to_buttons). Minor modifications were made to port the
changes in the original patch to a newer kernel version.
This patch was originally from Dominic Cerquetti originally written
for kernel 2.6.11.4, with minor modifications (API changes for USB,
spelling fixes to the documentation added in the original patch) made
to apply to the current kernel. I have modified Dominic's original
patch per some suggestions from Dmitry Torokhov. (There was nothing
in the patch format description about multiple From: lines, so I
haven't added myself.)
[[email protected]: cleanups]
Signed-off-by: Adam Buchbinder <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Remove many duplicated words under Documentation/ and do other small
cleanups.
Examples:
"and and" --> "and"
"in in" --> "in"
"the the" --> "the"
"the the" --> "to the"
...
Signed-off-by: Paolo Ornati <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
Lucas De Marchi