Patch series "mm: Page fault accounting cleanups", v5.
This is v5 of the pf accounting cleanup series. It originates from Gerald
Schaefer's report on an issue a week ago regarding to incorrect page fault
accountings for retried page fault after commit 4064b98270 ("mm: allow
VM_FAULT_RETRY for multiple times"):
https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/
What this series did:
- Correct page fault accounting: we do accounting for a page fault
(no matter whether it's from #PF handling, or gup, or anything else)
only with the one that completed the fault. For example, page fault
retries should not be counted in page fault counters. Same to the
perf events.
- Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf
event is used in an adhoc way across different archs.
Case (1): for many archs it's done at the entry of a page fault
handler, so that it will also cover e.g. errornous faults.
Case (2): for some other archs, it is only accounted when the page
fault is resolved successfully.
Case (3): there're still quite some archs that have not enabled
this perf event.
Since this series will touch merely all the archs, we unify this
perf event to always follow case (1), which is the one that makes most
sense. And since we moved the accounting into handle_mm_fault, the
other two MAJ/MIN perf events are well taken care of naturally.
- Unify definition of "major faults": the definition of "major
fault" is slightly changed when used in accounting (not
VM_FAULT_MAJOR). More information in patch 1.
- Always account the page fault onto the one that triggered the page
fault. This does not matter much for #PF handlings, but mostly for
gup. More information on this in patch 25.
Patchset layout:
Patch 1: Introduced the accounting in handle_mm_fault(), not enabled.
Patch 2-23: Enable the new accounting for arch #PF handlers one by one.
Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.)
Patch 25: Cleanup GUP task_struct pointer since it's not needed any more
This patch (of 25):
This is a preparation patch to move page fault accountings into the
general code in handle_mm_fault(). This includes both the per task
flt_maj/flt_min counters, and the major/minor page fault perf events. To
do this, the pt_regs pointer is passed into handle_mm_fault().
PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault
handlers.
So far, all the pt_regs pointer that passed into handle_mm_fault() is
NULL, which means this patch should have no intented functional change.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
For most architectures that support >2 levels of page tables,
pmd_alloc_one() is a wrapper for __get_free_pages(), sometimes with
__GFP_ZERO and sometimes followed by memset(0) instead.
More elaborate versions on arm64 and x86 account memory for the user page
tables and call to pgtable_pmd_page_ctor() as the part of PMD page
initialization.
Move the arm64 version to include/asm-generic/pgalloc.h and use the
generic version on several architectures.
The pgtable_pmd_page_ctor() is a NOP when ARCH_ENABLE_SPLIT_PMD_PTLOCK is
not enabled, so there is no functional change for most architectures
except of the addition of __GFP_ACCOUNT for allocation of user page
tables.
The pmd_free() is a wrapper for free_page() in all the cases, so no
functional change here.
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Pekka Enberg <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Abdul Haleem <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Peter Zijlstra (Intel) <[email protected]>
Cc: Satheesh Rajendran <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().
Cc: [email protected]
Acked-by: Thomas Bogendoerfer <[email protected]>A
Acked-by: Stafford Horne <[email protected]>
Acked-by: Greentime Hu <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>A
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
[1]: https://lore.kernel.org/lkml/[email protected]/T/#u
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Pull livepatching updates from Jiri Kosina:
- simplifications and improvements for issues Peter Ziljstra found
during his previous work on W^X cleanups.
This allows us to remove livepatch arch-specific .klp.arch sections
and add proper support for jump labels in patched code.
Also, this patchset removes the last module_disable_ro() usage in the
tree.
Patches from Josh Poimboeuf and Peter Zijlstra
- a few other minor cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
MAINTAINERS: add lib/livepatch to LIVE PATCHING
livepatch: add arch-specific headers to MAINTAINERS
livepatch: Make klp_apply_object_relocs static
MAINTAINERS: adjust to livepatch .klp.arch removal
module: Make module_enable_ro() static again
x86/module: Use text_mutex in apply_relocate_add()
module: Remove module_disable_ro()
livepatch: Remove module_disable_ro() usage
x86/module: Use text_poke() for late relocations
s390/module: Use s390_kernel_write() for late relocations
s390: Change s390_kernel_write() return type to match memcpy()
livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols
livepatch: Remove .klp.arch
livepatch: Apply vmlinux-specific KLP relocations early
livepatch: Disallow vmlinux.ko
Because of late module patching, a livepatch module needs to be able to
apply some of its relocations well after it has been loaded. Instead of
playing games with module_{dis,en}able_ro(), use existing text poking
mechanisms to apply relocations after module loading.
So far only x86, s390 and Power have HAVE_LIVEPATCH but only the first
two also have STRICT_MODULE_RWX.
This will allow removal of the last module_disable_ro() usage in
livepatch. The ultimate goal is to completely disallow making
executable mappings writable.
[ jpoimboe: Split up patches. Use mod state to determine whether
memcpy() can be used. Implement text_poke() for UML. ]
Cc: [email protected]
Suggested-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Joe Lawrence <[email protected]>
Acked-by: Miroslav Benes <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Without CONFIG_SECCOMP, we don't get this include recursively
through the existing includes, thus failing the build on not
having __NR_syscall_max defined. Add the necessary include to
fix this.
Signed-off-by: Johannes Berg <[email protected]>
Acked-By: Anton Ivanov <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Pull UML updates from Richard Weinberger:
- New mode for time travel, external via virtio
- Fixes for ubd to make sure no requests can get lost
- Fixes for vector networking
- Allow CONFIG_STATIC_LINK only when possible
- Minor cleanups and fixes
* tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Remove some unnecessary NULL checks in vector_user.c
um: vector: Avoid NULL ptr deference if transport is unset
um: Make CONFIG_STATIC_LINK actually static
um: Implement cpu_relax() as ndelay(1) for time-travel
um: Implement ndelay/udelay in time-travel mode
um: Implement time-travel=ext
um: virtio: Implement VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS
um: time-travel: Rewrite as an event scheduler
um: Move timer-internal.h to non-shared
hostfs: Use kasprintf() instead of fixed buffer formatting
um: falloc.h needs to be directly included for older libc
um: ubd: Retry buffer read on any kind of error
um: ubd: Prevent buffer overrun on command completion
um: Fix overlapping ELF segments when statically linked
um: Delete never executed timer
um: Don't overwrite ethtool driver version
um: Fix len of file in create_pid_file
um: Don't use console_drivers directly
um: Cleanup CONFIG_IOSCHED_CFQ
The idea comes from a discussion between Linus and Andrea [1].
Before this patch we only allow a page fault to retry once. We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time. This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page. However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.
This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY. It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event. Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.
Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):
- ALLOW_RETRY and !TRIED: this means the page fault allows to
retry, and this is the first try
- ALLOW_RETRY and TRIED: this means the page fault allows to
retry, and this is not the first try
- !ALLOW_RETRY and !TRIED: this means the page fault does not allow
to retry at all
- !ALLOW_RETRY and TRIED: this is forbidden and should never be used
In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths. One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.
This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault. It might also benefit
other potential users who will have similar requirement like userfault
write-protection.
GUP code is not touched yet and will be covered in follow up patch.
Please read the thread below for more information.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
Suggested-by: Linus Torvalds <[email protected]>
Suggested-by: Andrea Arcangeli <[email protected]>
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Brian Geffon <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Denis Plotnikov <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Martin Cracauer <[email protected]>
Cc: Marty McFadden <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maya Gokhale <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
In external or inf-cpu time-travel mode, ndelay/udelay currently
just waste CPU time since the simulation time doesn't advance.
Implement them properly in this case.
Note that the "if (time_travel_mode == ...)" parts compile out
if CONFIG_UML_TIME_TRAVEL_SUPPORT isn't set, time_travel_mode is
defined to TT_MODE_OFF in that case.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
This implements synchronized time-travel mode which - using a special
application on a unix socket - lets multiple machines take part in a
time-travelling simulation together.
The protocol for the unix domain socket is defined in the new file
include/uapi/linux/um_timetravel.h.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Instead of tracking all the various timer configurations,
modify the time-travel mode to have an event scheduler and
use a timer event on the scheduler to handle the different
timer configurations.
This doesn't change the function right now, but it prepares
the code for having different kinds of events in the future
(i.e. interrupts coming from other devices that are part of
co-simulation.)
While at it, also move time_travel_sleep() to time.c to
reduce the externally visible API surface.
Also, we really should mark time-travel as incompatible with
SMP, even if UML doesn't support SMP yet.
Finally, I noticed a bug while developing this - if we move
time forward due to consuming time while reading the clock,
we might move across the next event and that would cause us
to go backward in time when we then handle that event. Fix
that by invoking the whole event machine in this case, but
in order to simplify this, make reading the clock only cost
something when interrupts are not disabled. Otherwise, we'd
have to hook into the interrupt delivery machinery etc. and
that's somewhat intrusive.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
This file isn't really shared, it's only used on the kernel side,
not on the user side. Remove the include from the user-side and
move the file to a better place.
While at it, rename it to time-internal.h, it's not really just
timers but all kinds of things related to timekeeping.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
When statically linked, the .text section in UML kernels is not page
aligned, causing it to share a page with the executable headers. As
.text and the executable headers have different permissions, this causes
the kernel to wish to map the same page twice (once as headers with r--
permissions, once as .text with r-x permissions), causing a segfault,
and a nasty message printed to the host kernel's dmesg:
"Uhuuh, elf segment at 0000000060000000 requested but the memory is
mapped already"
By aligning the .text to a page boundary (as in the dynamically linked
version in dyn.lds.S), there is no such overlap, and the kernel runs
correctly.
Signed-off-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
console_drivers is kind of (semi-)private variable to the console code.
Direct use of it make us stuck with it being exported here and there.
Reduce use of console_drivers by replacing it with for_each_console().
Cc: Thomas Meyer <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
This reverts commit 786b2384bf ("um: Enable CONFIG_CONSTRUCTORS").
There are two issues with this commit, uncovered by Anton in tests
on some (Debian) systems:
1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS
isn't set. Don't recall now if it just wasn't needed on my system, or
if I never tested this case.
2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I
set CONFIG_CONSTRUCTORS, it fails again, which isn't totally
unexpected since whatever wanted to run is likely to have to run
before the kernel init etc. that calls the constructors in this case.
Basically, some constructors that gcc emits (libc has?) need to run
very early during init; the failure mode otherwise was that the ptrace
fork test already failed:
----------------------
$ ./linux mem=512M
Core dump limits :
soft - 0
hard - NONE
Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f
Aborted
----------------------
Thinking more about this, it's clear that we simply cannot support
CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan)
involve not use of the __attribute__((constructor)), but instead
some constructor code/entry generated by gcc. Therefore, we cannot
distinguish between kernel constructors and system constructors.
Thus, revert this commit.
Cc: [email protected] [5.4+]
Fixes: 786b2384bf ("um: Enable CONFIG_CONSTRUCTORS")
Reported-by: Anton Ivanov <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Acked-by: Anton Ivanov <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
LAST_IRQ was used incorrectly in init_IRQ.
Commit 09ccf0364c forgot to update the for loop.
Fix this.
Fixes: 49da7e64f3 ("High Performance UML Vector Network Driver")
Fixes: 09ccf0364c ("um: Fix off by one error in IRQ enumeration")
Signed-off-by: Erel Geron <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Acked-by: Anton Ivanov <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Convert files to use SPDX header. All files are licensed under the
GPLv2.
Signed-off-by: Alex Dewar <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
This module allows virtio devices to be used over a vhost-user socket.
Signed-off-by: Erel Geron <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
We currently do the time updates in the timer handler, even if
we just call the timer handler ourselves. In basic mode we must
in fact do it there since otherwise the OS timer signal won't
move time forward, but in inf-cpu mode we don't need to, and
it's harder to understand.
Restrict the update there to basic mode, adding a comment, and
do it before calling the timer_handler() in inf-cpu mode.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Periodic timers are broken, because the also only fire once.
As it happens, Linux doesn't care because it only sets the
timer to periodic very briefly during boot, and then switches
it only between one-shot and off later.
Nevertheless, fix the logic (we shouldn't even be looking at
time_travel_timer_expiry unless the timer is enabled) and
change the code to fire the timer periodically in periodic
mode, in case it ever gets used in the future.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
We do need to call the constructors for *modules*, and
at least for KASAN in the future, we must call even the
kernel constructors only later when the kernel has been
initialized.
Instead of relying on libc to call them, emit an empty
section for libc and let the kernel's CONSTRUCTORS code
do the rest of the job.
Tested that it indeed doesn't work in modules, and does
work after the fixes in both, with a few functions with
__attribute__((constructor)) in both dynamic and static
builds.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Otherwise it gets placed without the start/end markers.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
UML enables TRACE_IRQFLAGS_SUPPORT but doesn't actually implement
it. It seems to have been added for lockdep support, but that can't
actually really work well without IRQ flags tracing, as is also
very noisily reported when enabling CONFIG_DEBUG_LOCKDEP.
Implement it now.
Fixes: 711553efa5 ("[PATCH] uml: declare in Kconfig our partial LOCKDEP support")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Unfortunately, my build fix for when time travel mode isn't
enabled broke time travel mode, because I forgot that we need
to use the timer time after the timer has been marked disabled,
and thus need to leave the time stored instead of zeroing it.
Fix that by splitting the inline into two, so we can call only
the _mode() one in the relevant code path.
Fixes: b482e48d29 ("um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Pull UML updates from Richard Weinberger:
- A new timer mode, time travel, for testing with UML
- Many bugixes/improvements for the serial line driver
- Various bugfixes
* tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT
um: Fix kcov crash during startup
um: configs: Remove useless UEVENT_HELPER_PATH
um: Support time travel mode
um: Pass nsecs to os timer functions
um: Remove drivers/ssl.h
um: Don't garbage collect in deactivate_all_fds()
um: Silence lockdep complaint about mmap_sem
um: Remove locking in deactivate_all_fds()
um: Timer code cleanup
um: fix os_timer_one_shot()
um: Fix IRQ controller regression on console read
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
When CONFIG_UML_TIME_TRAVEL_SUPPORT isn't set, the build was broken.
Fix this.
Fixes: 065038706f ("um: Support time travel mode")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Kcov fails to start when compiled with kcov. Disable KCOV on
arch/uml/kernel/skas.
$ gdb -q -ex r ./vmlinux
Program received signal SIGSEGV, Segmentation fault.
check_kcov_mode (t=<>, needed_mode=<>) at kernel/kcov.c:70
70 mode = READ_ONCE(t->kcov_mode);
Signed-off-by: Marek Majkowski <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Sometimes it can be useful to run with "time travel" inside the
UML instance, for example for testing. For example, some tests
for the wireless subsystem and userspace are based on hwsim, a
virtual wireless adapter. Some tests can take a long time to
run because they e.g. wait for 120 seconds to elapse for some
regulatory checks. This obviously goes faster if it need not
actually wait that long, but time inside the test environment
just "bumps up" when there's nothing to do.
Add CONFIG_UML_TIME_TRAVEL_SUPPORT to enable code to support
such modes at runtime, selected on the command line:
* just "time-travel", in which time inside the UML instance
can move faster than real time, if there's nothing to do
* "time-travel=inf-cpu" in which time also moves slower and
any CPU processing takes no time at all, which allows to
implement consistent behaviour regardless of host CPU load
(or speed) or debug overhead.
An additional "time-travel-start=<seconds>" parameter is also
supported in this case to start the wall clock at this time
(in unix epoch).
With this enabled, the test mentioned above goes from a runtime
of about 140 seconds (with startup overhead and all) to being
CPU bound and finishing in 15 seconds (on my slow laptop).
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Peter Xu