The XDP qstats tests send 2k packets over a single socket.
Looks like when netdev CI is busy running those tests in QEMU
occasionally flakes. The target doesn't get to run at all
before all 2000 packets are sent.
Lower the number of packets to 1000 and reopen the socket
every 50 packets, to give RSS a chance to spread the packets
to multiple queues.
For the netdev CI testing either lowering the count or using
multiple sockets is enough, but let's do both for extra resiliency.
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Cross-merge networking fixes after downstream PR (net-6.18-rc6).
No conflicts, adjacent changes in:
drivers/net/phy/micrel.c
96a9178a29 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
61b7ade9ba ("net: phy: micrel: Add support for non PTP SKUs for lan8814")
and a trivial one in tools/testing/selftests/drivers/net/Makefile.
Signed-off-by: Jakub Kicinski <[email protected]>
For NICs with a large (1024+) number of queues, this test can cause
excessive memory fragmentation. This results in OOM errors, and in the
worst case driver/kernel crashes. We don't need to test with the max number
of queues, just enough to create a high likelihood of races between
reconfiguration and stats getting read.
Signed-off-by: Dimitri Daskalakis <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
This patch adds a selftest that verifies netconsole functionality
over bonded network interfaces using netdevsim. It sets up two bonded
interfaces acting as transmit (TX) and receive (RX) ends, placed in
separate network namespaces. The test sends kernel log messages and
verifies that they are properly received on the bonded RX interfaces
with both IPv4 and IPv6, and using basic and extended netconsole
formats.
This patchset aims to test a long-standing netpoll subsystem where
netpoll has multiple users. (in this case netconsole and bonding). A
similar selftest has been discussed in [1] and [2].
This test also tries to enable bonding and netpoll in different order,
just to guarantee that all the possibilities are exercised.
Link: https://lore.kernel.org/all/[email protected]/ [1]
Link: https://lore.kernel.org/lkml/96b940137a50e5c387687bb4f57de8b0435a653f.1404857349.git.decot@googlers.com/ [2]
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Create a netconsole test that puts a lot of pressure on the netconsole
list manipulation. Do it by creating dynamic targets and deleting
targets while messages are being sent. Also put interface down while the
messages are being sent, as creating parallel targets.
The code launches three background jobs on distinct schedules:
* Toggle netcons target every 30 iterations
* create and delete random_target every 50 iterations
* toggle iface every 70 iterations
This creates multiple concurrency sources that interact with netconsole
states. This is good practice to simulate stress, and exercise netpoll
and netconsole locks.
This test already found an issue as reported in [1]
Link: https://lore.kernel.org/all/[email protected]/ [1]
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Andre Carvalho <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Extract the netconsole target creation from create_dynamic_target(), by
moving it from create_dynamic_target() into a new helper function. This
enables other tests to use the creation of netconsole targets with
arbitrary parameters and no sleep.
The new helper will be utilized by forthcoming torture-type selftests
that require dynamic target management.
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/[email protected]
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <[email protected]>
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
We are trying to move away from netdevsim-only tests and towards
tests which can be run both against netdevsim and real drivers.
Replace the simple bash script we have for checking ethtool -g/-G
on netdevsim with a Python test tweaking those params as well
as channel count.
The new test is not exactly equivalent to the netdevsim one,
but real drivers don't often support random ring sizes,
let alone modifying max values via debugfs.
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Convert remaining __init__ files similar to what we did in
commit b615879dbf ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Lower the expected level of traffic in the pp_alloc_fail test
and calculate failure counter thresholds based on the traffic
rather than using a fixed constant.
We only have "QEMU HW" in NIPA right now, and the test (due to
debug dependencies) only works on debug kernels in the first place.
We need some place for it to pass otherwise it seems to be bit
rotting. So lower the traffic threshold so that it passes on QEMU
and with a debug kernel...
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Fix linter warnings, it's a bit hard to check for new ones otherwise.
W0311: Bad indentation. Found 16 spaces, expected 12 (bad-indentation)
C0114: Missing module docstring (missing-module-docstring)
W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
C0116: Missing function or method docstring (missing-function-docstring)
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Send a non-trivial number of packets and make sure that they
are counted correctly in qstats. Per qstats specification
XDP is the first layer of the stack so we should see Rx and Tx
counters go up for packets which went thru XDP.
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Linters are still not very happy with our __init__ files,
which was pointed out in recent review (see Link).
We have previously started importing things one by one to
make linters happy with the test files (which import from __init__).
But __init__ file itself still makes linters unhappy.
To clean it up I believe we must completely remove the wildcard
imports, and assign the imported modules to __all__.
hds.py needs to be fixed because it seems to be importing
the Python standard random from lib.net.
We can't use ksft_pr() / ktap_result() in case importing
from net.lib fails. Linters complain that those helpers
themselves may not have been imported.
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
We get a significant number of conflicts between net and net-next
because of selftests Makefile changes. People tend to append new
test cases at the end of the Makefile when there's no clear sort
order. Sort all networking selftests Makefiles, use the following
format:
VAR_NAME := \
entry1 \
entry2 \
entry3 \
# end of VAR_NAME
Some Makefiles are already pretty close to this.
Acked-by: Antonio Quartulli <[email protected]>
Acked-by: Matthieu Baerts (NGI0) <[email protected]>
Acked-by: Allison Henderson <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Test TCP MSS getting auto-adjusted. PSP adds an encapsulation overhead
of 40B per packet, when used in transport mode without any
virtualization cookie or other optional PSP header fields. The kernel
should adjust the MSS for a connection after PSP tx state is reached.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Zahka <[email protected]>
Link: https://patch.msgid.link/[email protected]
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Add basic tests for sending data over PSP and making sure that key
rotation toggles the MSB of the spi.
Deploy PSP responder on the remote end. We also need a healthy dose
of common helpers for setting up the connections, assertions and
interrogating socket state on the Python side.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Zahka <[email protected]>
Link: https://patch.msgid.link/[email protected]
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
PSP tests need the remote system to support PSP, and some PSP capable
application to exchange data with. Create a simple PSP responder app
which we can build and deploy to the remote host. The tests themselves
can be written in Python but for ease of deploying the responder is in C
(using C YNL).
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Zahka <[email protected]>
Link: https://patch.msgid.link/[email protected]
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
This introduces a test for IPSec offload over bonding, utilizing netdevsim
for the testing process, as veth interfaces do not support IPSec offload.
The test will ensure that the IPSec offload functionality remains operational
even after a failover event occurs in the bonding configuration.
Here is the test result:
TEST: bond_ipsec_offload (active_slave eth0) [ OK ]
TEST: bond_ipsec_offload (active_slave eth1) [ OK ]
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Simple tests to validate kernel's output. FEC bin range should be valid
means high boundary should be not less than low boundary. Bin boundaries
have to be provided as well as error counter value. Per-plane value
should match bin's value.
Signed-off-by: Vadim Fedorenko <[email protected]>
Reviewed-by: Aleksandr Loktionov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Add simple tests to validate that the driver sets up timestamping
configuration according to what is reported in capabilities.
For RX timestamping we allow driver to fallback to wider scope for
timestamping if filter is applied. That actually means that driver
can enable ptpv2-event when it reports ptpv2-l4-event is supported,
but not vice versa.
Signed-off-by: Vadim Fedorenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a462 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <[email protected]>
There are currently no kernel tests that verify setting and getting
options of the team driver.
In the future, options may be added that implicitly change other
options, which will make it useful to have tests like these that show
nothing breaks. There will be a follow up patch to this that adds new
"rx_enabled" and "tx_enabled" options, which will implicitly affect the
"enabled" option value and vice versa.
The tests use teamnl to first set options to specific values and then
gets them to compare to the set values.
Signed-off-by: Marc Harvey <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Add comprehensive selftest to verify:
- Per-port actor priority setting via ad_actor_port_prio
- Aggregator selection behavior with port_priority ad_select policy
Also move cmd_jq helper from forwarding/lib.sh to net/lib.sh for
broader reusability across network selftests.
Here is the result output
# ./bond_lacp_prio.sh
TEST: bond 802.3ad (ad_actor_port_prio setting) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio select) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio switch) [ OK ]
Signed-off-by: Hangbin Liu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
devmem test fails on NIPA. Most likely we get skb(s) with readable
frags (why?) but the failure manifests as an OOM. The OOM happens
because ncdevmem spams the following message:
recvmsg ret=-1
recvmsg: Bad address
As of today, ncdevmem can't deal with various reasons of EFAULT:
- falling back to regular recvmsg for non-devmem skbs
- increasing ctrl_data size (can't happen with ncdevmem's large buffer)
Exit (cleanly) with error when recvmsg returns EFAULT. This should at
least cause the test to cleanup its state.
Signed-off-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Mina Almasry <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
rss_ctx.test_rss_key_indir implicitly expects at least 5 queues,
as it checks that the traffic on first 2 queues is lower than
the remaining queues when we use all queues. Special case fewer
queues.
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
The rss_ctx test has gotten pretty flaky after I increased
the queue count in NIPA 2->3. Not 100% clear why. We get
a lot of failures in the rss_ctx.test_hitless_key_update case.
Looking closer it appears that the failures are mostly due
to startup costs. I measured the following timing for ethtool -X:
- python cmd(shell=True) : 150-250msec
- python cmd(shell=False) : 50- 70msec
- timed in bash : 45- 55msec
- YNL Netlink call : 2- 4msec
- .set_rxfh callback : 1- 2msec
The target in the test was set to 200msec. We were mostly measuring
ethtool startup cost it seems. Switch to YNL since it's 100x faster.
Lower the pass criteria to 150msec, no real science behind this number
but we removed some overhead, drivers which previously passed 200msec
should easily pass 150msec now.
Separately we should probably follow up on defaulting to shell=False,
when script doesn't explicitly ask for True, because the overhead
is rather significant.
Switch from _rss_key_rand() to random.randbytes(), YNL takes a binary
array rather than array of ints.
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Clean up tests which expect shell=True without explicitly passing
that param to cmd(). There seems to be only one such case, and
in fact it's better converted to a direct write.
Reviewed-by: Breno Leitao <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Commit 0d6ccfe6b3 ("selftests: drv-net: rss_ctx: check for all-zero keys")
added a skip exception if NIC has fewer than 3 queues enabled,
but it's just constructing the object, it's not actually rising
this exception.
Before:
# Exception| net.lib.py.utils.CmdExitFailure: Command failed: ethtool -X enp1s0 equal 3 hkey d1:cc:77:47:9d:ea:15:f2:b9:6c:ef:68:62:c0:45:d5:b0:99:7d:cf:29:53:40:06:3d:8e:b9:bc:d4:70:89:b8:8d:59:04:ea:a9:c2:21:b3:55:b8:ab:6b:d9:48:b4:bd:4c:ff:a5:f0:a8:c2
not ok 1 rss_ctx.test_rss_key_indir
After:
ok 1 rss_ctx.test_rss_key_indir # SKIP Device has fewer than 3 queues (or doesn't support queue stats)
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Jakub Kicinski