Parse the pipeline direction from topology. The direction_valid token is
required for backward-compatibility with older topologies that may not
have the direction set for pipelines. This will be used when
setting up pipelines to check if a pipeline is in the same direction as
the requested params and skip those in the opposite direction like in
the case of echo reference capture pipelines during playback.
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Add topology tokens for defining user-space domain_id, required stack
and heap size byte for a component. The new topology tokens are
SOF_TKN_COMP_DOMAIN_ID, SOF_TKN_COMP_HEAP_BYTES_REQUIREMENT and
SOF_TKN_COMP_STACK_BYTES_REQUIREMENT for defining required stack and
heap size for a component.
Signed-off-by: Jyri Sarha <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Add SOF_TKN_COMP_SCHED_DOMAIN and connect it to struct snd_sof_widget
comp_domain member, with new get_token_comp_domain() function.
The logic is such that if the topology attribute is not present in the
widget node the corresponding IPC4 extension value is taken from the
module's manifest like before. But if the attribute is found and
recognized its value overrides what is there in the manifest.
Signed-off-by: Jyri Sarha <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
New tokens are added to topology:
1202: SOF_TKN_STREAM_PLAYBACK_PAUSE_SUPPORTED
1203: SOF_TKN_STREAM_CAPTURE_PAUSE_SUPPORTED
The new tokens are used to advertise support for PAUSE/RESUME operation on
a PCM device depending on firmware product, use case, pipeline topology.
The snd_sof_pcm_stream.pause_supported is updated to reflect the advertised
value for the PCM device.
If the token does not exist then the pause_supported is set to false.
Note: it is up to the platform code to use this flag to decide to advertise
the PAUSE support for user space or not.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Liam Girdwood <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Normally, the type of enums is "unsigned int" or "int". GCC has
the "-fshort-enums" option, which instructs the compiler to
use the smallest data type that can hold all the values in
the enum (i.e: char, short, int or their unsigned variants).
According to the GCC documentation, "-fshort-enums" may be
default on some targets. This seems to be the case for SOF
when built for a certain 32-bit ARM platform.
On Linux, this is not the case (tested with "aarch64-linux-gnu-gcc")
which means enums such as "enum sof_comp_type" will end up having
different sizes on Linux and SOF. Since "enum sof_comp_type" is used in
IPC-related structures such as "struct sof_ipc_comp", this means
the fields of the structures will end up being placed at different
offsets. This, in turn, leads to SOF not being able to properly
interpret data passed from Linux.
With this in mind, replace "enum sof_comp_type" from
"struct sof_ipc_comp" with "uint32_t".
Signed-off-by: Laurentiu Mihalcea <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Reviewed-by: Cezary Rojewski <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Adds SOF_TKN_COMP_NO_WNAME_IN_KCONTROL_NAME token, and copies the
token's tuple value to the no_wname_in_kcontrol_name flag in struct
snd_soc_dapm_widget.
If the tuple value for the token in the topology is true, then the
widget name is not added to the mixer name. In practice "gain.2.1 Post
Mixer Analog Playback Volume" becomes just "Post Mixer Analog Playback
Volume".
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Signed-off-by: Jyri Sarha <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Add logic for setting up and tearing down chained DMA connections.
Since pipelines are not used, all the logic to set the pipeline states
can be bypassed, with only the DMA programming sequences remaining. In
addition the same format needs to be used for host- and link-DMA,
without the usual fixup to use the S32_LE format on the link.
Note however that for convenience and compatibility with existing
definitions, the topology relies on the concept of pipelines with a
'USE_CHAIN_DMA' token indicating that all the logic shall be bypassed.
Unlike 'normal' ALSA sequences, the chain DMA is not programmed in
hw_params/hw_free. The IPC message to set-up and tear-down chained DMA
are sent in sof_ipc4_trigger_pipelines(), but the contents prepared
earlier.
Chained DMA is only supported by the Intel HDA DAI for now, and only
S16_LE and S32_LE formats are supported for now.
Signed-off-by: Jyri Sarha <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Merge series from Peter Ujfalusi <[email protected]>:
The modules in IPC4 can have multiple 'pins' on their input and output
and these pins can receive or output audio in different formats.
Currently we assume that all pins are using the same format which is a
limitation that needs to be lifted in order to support more complex
components.
This series will extend and rework the format handling to allow
different formats on pins.
Introduce a new struct sof_ipc4_pin_format which contains the pin index
and the buffer size. Replace the type of available input/output audio
formats in struct sof_ipc4_available_audio_format with this new struct
type and rename them to input_pin_fmts and output_pin_fmts.
Also, add a new token, SOF_TKN_CAVS_AUDIO_FORMAT_PIN_INDEX that will be
used to parse the pin index for the audio format from topology.
Currently we only set the audio format for Pin 0 in topology, so the
default value will be 0 for all audio formats.
Finally, parse the pin_index and the input/output buffer sizes
along with audio formats into the pin_format arrays in struct
sof_ipc4_available_audio_format. This makes the base_config array in struct
sof_ipc4_available_audio_format redundant. So remove it. This change
will allow the addition of audio formats for the non-zero pins in
topology transparent to the topology parser in the kernel.
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Do not parse the SOF_TKN_CAVS_AUDIO_FORMAT_DMA_BUFFER_SIZE token as the
dma_buffer_size can be derived from the input/output buffer size and the
type of widget during copier prepare. For the deep buffer case,
introduce a new token that will be used to get the deep buffer DMA size
for the host copier from topology.
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
With IPC4 the sof_abit_hdr is only used between user space
(and in topology) and kernel.
The same abi header is used with small differencies like different
magic number and the type field have slightly different name, but
similar function in IPC4 (param_id).
Update the kernel documentation to highlight the differences.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Jaska Uimonen <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Add support for parsing sink/source pin binding array
per widget from topology. The pin binding arrays will
be used to determine the source and sink queue IDs during
widget binding for widget that requires special pin binding.
An example of widget that requires special pin binding is
the smart amplifier widget, its feedback sink pin has to be
connected to a capture DAI copier for codec feedback, while
the other sink pin has to be connected to a host DAI copier.
Pin ID is required during widget binding for correct route setup.
Conversely, the pin ID for 'generic' pins is not defined in the
topology and will be allocated by the kernel dynamically. When
only one pin is supported, the pin ID shall always be zero. When
more than one pin is supported, the pin ID is determined with the
ID allocation mechanism in the kernel.
Signed-off-by: Chao Song <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Suggested-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Pull sound updates from Takashi Iwai:
"As the diffstat shows, we've had lots of developments in a wide range
at this time; the majority of changes are about ASoC, including
subsystem-wide cleanups, continued SOF / Intel updates and a bunch of
new drivers (as usual), while there have been some significant (but
almost invisible) improvements in ALSA core side, too.
Below are some highlights:
Core:
- Faster lookups of control elements with Xarray; normal user won't
notice, but on the devices with tons of control elements, it can be
visibly faster
- Support for input validation for controls; this will harden for
badly written drivers in general with a slight overhead
- Deferred async signal handling for working around the potential
deadlocks
- Cleanup / refactoring raw MIDI locking code
ASoC:
- Restructing of the set_fmt() callbacks for making things clearer in
situations like CODEC to CODEC links
- Clean up and modernizing the DAI naming scheme setups
- Merge of more of the Intel AVS driver stack, including some board
integrations
- New version 4 mechanism for communication with SOF DSPs
- Suppoort for dynamically selecting the PLL to use at runtime on
i.MX platforms
- Improvements for CODEC to CODEC support in the generic cards
- Support for AMD Jadeite and various machines, AMD RPL, Intel
MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
WAS883x, and Texas Instruments TAS2780
HD- and USB-audio:
- Continued improvement for CS35L41 (sub)codec support
- More quirks for various devices (HP, Lenovo, Dell, Clevo)"
* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits)
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
ALSA: line6: Replace sprintf() with sysfs_emit()
ALSA: hda: Replace sprintf() with sysfs_emit()
ALSA: pcm: Replace sprintf() with sysfs_emit()
ALSA: core: Replace scnprintf() with sysfs_emit()
ALSA: control-led: Replace sprintf() with sysfs_emit()
ALSA: aoa: Replace sprintf() with sysfs_emit()
ALSA: ac97: Replace sprintf() with sysfs_emit()
ALSA: hda/realtek: Add quirk for Clevo NV45PZ
ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
ALSA: control: Use deferred fasync helper
ALSA: pcm: Use deferred fasync helper
ALSA: timer: Use deferred fasync helper
ALSA: core: Add async signal helpers
ASoC: q6asm: use kcalloc() instead of kzalloc()
ACPI: scan: Add CLSA0101 Laptop Support
ALSA: hda: cs35l41: Support CLSA0101
ALSA: hda: cs35l41: Use the CS35L41 HDA internal define
ASoC: dt-bindings: use spi-peripheral-props.yaml
ASoC: codecs: va-macro: use fsgen as clock
...
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(linux-5.19-rc2$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
-fstrict-flex-arrays=3 is coming and we need to land these changes
to prevent issues like these in the short future:
../fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0,
but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If
this breaks anything, we can use a union with a new member name.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Build-tested-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/lkml/62b675ec.wKX6AOZ6cbE71vtF%[email protected]/
Acked-by: Dan Williams <[email protected]> # For ndctl.h
Signed-off-by: Gustavo A. R. Silva <[email protected]>
The host stream position is updated when no_stream_position is set as 0.
However current implementation updates host stream position only when
report data is larger than or equal to host period size which is decided
by the period size of host side. It maybe cause host stream position
update not in time. Therefore this patch introduces another field
"cont_update_posn", a boolean value aimed to update host stream position
continuously and based on period size of pipeline. It can get better
precise when need to update host stream position from firmware.
Reviewed-by: Daniel Baluta <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Signed-off-by: YC Hung <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Add a bit definition to the fw_ready message, to denote if the FW
supports the IMR (Isolated Memory Region) restoring feature.
If the bit is set, the driver can skip downloading the firmware again
during system resume or runtime resume.
Bump the ABI version to 3.19 to make it aligned with FW side.
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Keyon Jie <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Today, we set up all widgets required for all PCM streams
at the time of topology parsing even if they are not
used. An optimization would be to only set up the widgets
required for currently active PCM streams. This would give
the FW the opportunity to power gate unused memory blocks,
thereby saving power.
For dynamic pipelines, the widgets in the connected DAPM path
for each PCM will need to be set up at runtime. This patch
introduces a new token, DYNAMIC_PIPELINE, for scheduler type
widgets that indicate whether a pipeline should be set up
statically during topology load or at runtime when the PCM is
opened. Introduce a new field called dynamic_pipeline_widget
in struct snd_sof_widget to save the value of the parsed token.
The token is set only for the pipeline (scheduler type)
widget and must be propagated to all widgets in the same
pipeline during topology load. Introduce another field called
pipe_widget in struct snd_sof_widget that saves the pointer to
the scheduler widget with the same pipeline ID as that of the
widget. This field is populated when the pipeline completion
callback is invoked during topology loading.
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Signed-off-by: Daniel Baluta <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Currently SOF supports running pipelines on secondary DSP cores in a
limited way. This patch represents the next step in SOF multi-core DSP
support, it adds checks for core ID to individual topology components.
It takes care to power up all the requested cores. More advanced DSP
core power management should be added in the future.
Signed-off-by: Pan Xiuli <[email protected]>
Signed-off-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
This step is needed to add possibility to pack sof_ipc_window inside
another one in used FW build tools - for example in extended manifest.
Structure reusability leads to easy parsing function reuse, so source
code is shorter and easier to maintain.
Using structures with constant size is less tricky and properly
supported by each toolchain by contrast to variable size elements.
This is minor ABI change - backward compatibility is kept.
Signed-off-by: Karol Trzcinski <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Ranjani Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
The recent batch of SOF changes failed to build on some x86
configurations including an allmodconfig, revert the commits:
e150ef4169 ASoC: SOF: Introduce extended manifest
3710914178 ASoC: SOF: ext_manifest: parse firmware version
7c024b948c ASoC: SOF: ext_manifest: parse compiler version
9e72f13ee5 ASoC: SOF: ext_manifest: parse windows
to fix this.
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
FW interface for HDA DAI parameters was extended with information on
sampling rate and channel count in version 3.16. Align kernel header
with the FW change. This change is backwards compatible. Old firmware
will ignore the values.
Signed-off-by: Bard Liao <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Align struct sof_ipc_cc_version to firmware definition in SOF ABI 3.15.0.
The struct definition was changed due to errors in FW build.
The Cadence XCC compiler produces incorrect linkage section sizes, when a
variable length array is used in the compiler version struct. The firmware
definition was changed to a fixed 32 byte compiler description string.
This length covers all released firmware binaries and thus only a minor
ABI change is needed.
As the same structure is used in IPC messages between driver and firmware,
the kernel needs to be aligned to firmware change.
Signed-off-by: Pan Xiuli <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Share how many injection probe DMAs and how many probe points
driver can request from FW.
injection_dmas_max 0 means injection is not supported
probe_points_max 0 means whole probes subsystem in FW is not enabled
and not compiled in.
ABI version change to 3.14.0
Signed-off-by: Pan Xiuli <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Ranjani Sridharan