The OCC poll response parser walks a counted list of sensor data blocks.
It used the static backing-array capacity as the parse boundary, but a
transport response makes only data_length bytes current and valid. A
truncated response can therefore make the parser consume a block header or
block extent outside the current response.
Use data_length as the parent boundary, prove the fixed poll header and
each current block header before reading them, and prove the complete block
before advancing. Keep parsed sensor metadata local until the complete
response has passed validation, then publish it. Propagate
malformed-response errors before publishing the OCC as active.
Fixes: aa195fe49b ("hwmon (occ): Parse OCC poll response")
Signed-off-by: Pengpeng Hou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
MAX34451 and ADPM chips do not support standard PMBus VIN/IIN limit
registers, manufacturer specific min/max registers, or undercurrent
or undertemperature fault limits. STATUS_BYTE and STATUS_OTHER are also
not available. Accessing these non-existent registers during driver
initialization triggers a CML error and asserts ALERT. Handled by
blocking these functions during read/write.
Fixes: 7a001dbab4 ("hwmon: (pmbus/max34440) Add support for MAX34451.")
Fixes: 629cf8f6c2 ("hwmon: (pmbus/max34440) Add support for ADPM12160")
Fixes: 2e0b52f1ae ("hwmon: (pmbus/max34440): add support adpm12200")
Fixes: 479bfeba2e ("hwmon: (pmbus/max34440): add support adpm12250")
Signed-off-by: Alexis Czezar Torreno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
Reported-by: Sashiko <[email protected]>
Fixes: f3b4b146eb ("hwmon: Add driver for NZXT Kraken X and Z series AIO CPU coolers")
Signed-off-by: Guenter Roeck <[email protected]>
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
Reported-by: Sashiko <[email protected]>
Fixes: 53e68c20ae ("hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2")
Signed-off-by: Guenter Roeck <[email protected]>
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
Reported-by: Sashiko <[email protected]>
Fixes: 42ac68e3d4 ("hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers")
Signed-off-by: Guenter Roeck <[email protected]>
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
Reported-by: Sashiko <[email protected]>
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Guenter Roeck <[email protected]>
hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
corsairpsu_probe(). If the probe operation fails after "io start" has
been initiated, this race condition will result in a uaf vulnerability
[1].
CPU0 CPU1
==== ====
corsairpsu_probe()
hid_device_io_start()
... unlock driver_input_lock
hid_hw_stop()
kfree(hidraw) __hid_input_report()
... acquire driver_input_lock
hid_report_raw_event()
hidraw_report_event()
... access hidraw's list_lock // trigger uaf
Consequently, when corsairpsu_probe() fails and hid_hw_stop() needs to
be executed, the io_started flag is first cleared while holding the
driver_input_lock to prevent potential race conditions involving input
reports.
[1]
BUG: KASAN: slab-use-after-free in rt_spin_lock+0x83/0x400 kernel/locking/spinlock_rt.c:56
Call Trace:
hidraw_report_event+0x5d/0x3a0 drivers/hid/hidraw.c:577
hid_report_raw_event+0x311/0x1730 drivers/hid/hid-core.c:2076
__hid_input_report drivers/hid/hid-core.c:2152 [inline]
hid_input_report+0x44e/0x580 drivers/hid/hid-core.c:2174
hid_irq_in+0x47e/0x6d0 drivers/hid/usbhid/hid-core.c:286
__usb_hcd_giveback_urb+0x3b3/0x5e0 drivers/usb/core/hcd.c:1657
dummy_timer+0x8a9/0x47d0 drivers/usb/gadget/udc/dummy_hcd.c:2005
Allocated by task 10:
hidraw_connect+0x57/0x430 drivers/hid/hidraw.c:606
hid_connect+0x5bf/0x19d0 drivers/hid/hid-core.c:2277
hid_hw_start+0xa8/0x120 drivers/hid/hid-core.c:2387
corsairpsu_probe+0xd9/0x3c0 drivers/hwmon/corsair-psu.c:782
Freed by task 10:
hidraw_disconnect+0x4f/0x60 drivers/hid/hidraw.c:662
hid_disconnect drivers/hid/hid-core.c:2362 [inline]
hid_hw_stop+0x101/0x1e0 drivers/hid/hid-core.c:2407
corsairpsu_probe+0x327/0x3c0 drivers/hwmon/corsair-psu.c:826
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
Fixes: d115b51e0e ("hwmon: add Corsair PSU HID controller driver")
Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=9eebf5f6544c5e873858
Tested-by: [email protected]
Signed-off-by: Edward Adam Davis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[groeck: Updated subject and description;
call hid_device_io_stop() only if IO has been started]
Signed-off-by: Guenter Roeck <[email protected]>
Pull mod_devicetable.h header split from Uwe Kleine-König:
"Split <linux/mod_devicetable.h> in per subsystem headers
<linux/mod_devicetable.h> is included transitively in nearly every
driver in an x86_64 allmodconfig build of v7.1:
$ find drivers -name \*.o -not -name \*.mod.o | wc -l
21330
$ find drivers -name \*.o.cmd -not -name \*.mod.o.cmd | xargs grep -l mod_devicetable.h | wc -l
17038
The result of this mixture of different and unrelated subsystem
details is that even when touching an obscure device id struct most of
the kernel needs to be recompiled. Given that each driver typically
only needs one or two of these structures, splitting into per
subsystem headers and only including what is really needed reduces the
amount of needed recompilation.
This split is implemented in the first commit and then after some
preparatory work in the following commits, the last two replace
includes of <linux/mod_devicetable.h> by the actually needed more
specific headers.
There are still a few instances left, but the ones with high impact
(that is in headers that are used a lot) and the easy ones (.c files)
are handled. These remaining includes will be addressed during the
next merge window"
* tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (headers)
parisc: #include <linux/compiler.h> for unlikely() in <asm/ptrace.h>
media: em28xx: Add include for struct usb_device_id
LoongArch: KVM: Add include defining struct cpu_feature
ALSA: hda/core: Add include defining struct hda_device_id
usb: dwc2: Add include defining struct pci_device_id
platform/x86: int3472: Add include defining struct dmi_system_id
platform/x86: x86-android-tablets: Add include defining struct dmi_system_id
i2c: Let i2c-core.h include <linux/i2c.h>
of: Explicitly include <linux/types.h> and <linux/err.h>
platform/x86: msi-ec: Ensure dmi_system_id is defined
usb: serial: Include <linux/usb.h> in <linux/usb/serial.h>
driver core: platform: Include header for struct platform_device_id
driver: core: Include headers for acpi_device_id and of_device_id for struct device_driver
media: ti: vpe: #include <linux/platform_device.h> explicitly
mod_devicetable.h: Split into per subsystem headers
Sashiko reports:
In the aspeed-g6-pwm-tacho driver, the aspeed_tach_val_to_rpm() function
calculates the fan RPM using the tachometer value. However, it does not
check if the tachometer value is zero before performing the division.
If the hardware reports a tachometer value of 0 (which can happen due to
an extremely fast pulse, a stuck edge, or a hardware glitch), the
calculated tach_div evaluates to 0. The subsequent call to do_div() with
tach_div as the divisor triggers a divide-by-zero exception, leading to
a kernel panic.
Check the divisor against zero to fix the problem.
Fixes: 7e1449cd15 ("hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach")
Cc: Billy Tsai <[email protected]>
Reported-by: Sashiko <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Sashiko reports:
Commit 754bd2b4a0 ("hwmon: (pmbus/core) Protect regulator operations with
mutex") introduced a worker to batch regulator events over time using
atomic_or(). The delayed worker then passes the combined bitmask unmodified
to regulator_notifier_call_chain().
The core regulator subsystem's regulator_handle_critical() function
evaluates the event parameter using a strict switch statement. If
multiple distinct faults occur before the worker runs (e.g.,
REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined
bitmask fails to match any case. This leaves the reason as NULL and
completely bypasses the critical hw_protection_trigger().
Fix the problem by passing events bit by bit to the regulator event
handler.
Reported-by: Sashiko <[email protected]>
Fixes: 754bd2b4a0 ("hwmon: (pmbus/core) Protect regulator operations with mutex")
Signed-off-by: Guenter Roeck <[email protected]>
Sashiko detected potential coefficient overflow if large shunt resistor
is used. When going unnoticed it can cause "drastically incorrect
telemetry scaling factors" as Sashiko put it.
I am not convinced such "drastically incorrect telemetry scaling
factors" could have gone unnoticed, so I suspect such large shunt
resistors aren't really used. Well, it shouldn't hurt to detect the
error and abort the probe before Really Wrong current / power -values
are reported to user by the hwmon.
Signed-off-by: Matti Vaittinen <[email protected]>
Link: https://lore.kernel.org/r/d9e3320dbd62e094ff89598cb3aac5b5e716f9e7.1782458224.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <[email protected]>
While adding support for the ROHM BD127X0 hot-swap controllers, sashiko
reported an error in device-name comparison, which can lead to reading
uninitialized stack memory.
Quoting Sashiko:
This is a pre-existing issue, but I noticed that just before this block in
adm1275_probe(), there might be an out-of-bounds stack read:
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) { ... }
for (mid = adm1275_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
Since i2c_smbus_read_block_data() reads up to 32 bytes into the
uninitialized stack array block_buffer without appending a null
terminator, strncasecmp() could read past the valid bytes returned in ret.
For example, if the device returns a shorter string like "adm12", checking
it against "adm1275" up to the length of "adm1275" will continue reading
into uninitialized stack bounds.
Prevent reading uninitialized memory by zeroing the stack array.
Signed-off-by: Matti Vaittinen <[email protected]>
Fixes: 87102808d0 ("hwmon: (pmbus/adm1275) Validate device ID")
Link: https://lore.kernel.org/r/c8ad38e0cdb347261c6245de2b7965e747f28d22.1782458224.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <[email protected]>
w83627hf_probe() creates cpu0_vid and vrm with device_create_file() when
VID information is available.
The error path and remove callback only remove the common and optional
attribute groups. Those groups do not contain cpu0_vid or vrm, so the
files can remain after a later probe failure or after device removal
while their callbacks still expect live driver data.
Remove the standalone VID sysfs files from both the probe error path and
the remove callback.
Signed-off-by: Pengpeng Hou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Guenter Roeck <[email protected]>
w83793_probe() creates the vrm sysfs file after creating the VID files
when VID support is present.
The normal remove path deletes vrm, but the probe error path only
removes the sensor, SDA, VID, fan, PWM and temperature files. A later
probe failure can therefore leave vrm behind after the driver data has
been freed.
Remove vrm in the probe error path next to the VID files, matching the
normal remove path.
Signed-off-by: Pengpeng Hou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Guenter Roeck <[email protected]>
atk_ec_present() walks the management group package returned by the GGRP
ACPI method and, for each sub-package, reads its first element:
id = &obj->package.elements[0];
if (id->type != ACPI_TYPE_INTEGER)
without checking that the sub-package is non-empty. ACPICA allocates the
element array with exactly package.count entries, so for a sub-package
with a zero count this reads past the allocation.
The sibling function atk_debugfs_ggrp_open() performs the same access but
skips empty packages with a package.count check first. Add the same
check to atk_ec_present() so a malformed firmware package cannot trigger
an out-of-bounds read.
Fixes: 9e6eba610c ("hwmon: (asus_atk0110) Enable the EC")
Cc: [email protected]
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.
Mirror pmbus_reg2data_vid() so writes round-trip with reads.
Signed-off-by: Abdurrahman Hussain <[email protected]>
Assisted-by: Claude:claude-opus-4-7 [Claude Code]
Link: https://lore.kernel.org/r/[email protected]
Fixes: 068c227056 ("hwmon: (pmbus) Add support for VR12")
Fixes: d4977c083a ("hwmon: (pmbus) Add support for Intel VID protocol VR13")
Fixes: 9d72340b6a ("hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes")
Fixes: 969a4ec86c ("hwmon: (pmbus/core) Add support for NVIDIA nvidia195mv mode")
Signed-off-by: Guenter Roeck <[email protected]>
occ_active(false) and occ_shutdown() unregister sysfs-backed devices while
occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can
wait for active sysfs callbacks to drain, and those callbacks can enter the
OCC update path and try to take occ->lock again. That gives the unregister
paths the lock ordering occ->lock -> sysfs callback drain, while a callback
has the opposite edge sysfs callback -> occ->lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the real unregister and callback carrier:
occ_shutdown()
hwmon_device_unregister()
occ_show_temp_1()
occ_update_response()
Lockdep reported the circular dependency with occ_shutdown() already
holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs
side:
WARNING: possible circular locking dependency detected
... (sysfs_lock) ... at: hwmon_device_unregister+0x12/0x30 [vuln_msv]
... (&test_occ.lock) ... at: occ_shutdown.constprop.0+0xe/0x40 [vuln_msv]
occ_update_response.isra.0+0xb/0x20 [vuln_msv]
occ_show_temp_1.constprop.0.isra.0+0x23/0x40 [vuln_msv]
*** DEADLOCK ***
Serialize hwmon registration and removal with a separate hwmon_lock.
Under that lock, detach occ->hwmon and update occ->active while occ->lock
is held so concurrent OCC state changes still see a stable state, then
drop occ->lock before calling hwmon_device_unregister(). Remove the
driver sysfs group before taking occ->lock in occ_shutdown(), so draining
the driver attributes cannot wait while the OCC mutex is held. Also make
OCC update callbacks return -ENODEV after deactivation, so callbacks that
already passed sysfs active protection do not poll the hardware after
teardown has detached the hwmon device.
Fixes: 849b0156d9 ("hwmon: (occ) Delay hwmon registration until user request")
Fixes: ac6888ac5a ("hwmon: (occ) Lock mutex in shutdown to prevent race with occ_active")
Cc: [email protected]
Signed-off-by: Runyu Xiao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
Pull SCSI updates from James Bottomley:
"Only ufs driver updates this time, apart from which this is just an
assortment of bug fixes and AI assisted changes.
The biggest other change is the reversion of the sas_user_scan patch
which supported a mpi3mr NVME behaviour but caused major issues for
other sas controllers. The next biggest is the removal of target reset
in tcm_loop.c"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (56 commits)
scsi: target: Remove tcm_loop target reset handling
scsi: lpfc: Fix spelling mistakes in comments
scsi: ufs: ufs-pci: Add AMD device ID support
scsi: ufs: core: Handle PM commands timeout before SCSI EH
scsi: devinfo: Broaden Promise VTrak E310/E610 identification
scsi: target: Use constant-time crypto_memneq() for CHAP digests
scsi: target: Fix hexadecimal CHAP_I handling
scsi: scsi_debug: Fix one-partition tape setup bounds
scsi: ufs: qcom: dt-bindings: Document the Hawi UFS controller
scsi: mailmap: Update Avri Altman's email address
scsi: ufs: Remove redundant vops NULL check and trivial wrapper
scsi: ufs: Remove unnecessary return in void vops wrappers
scsi: ufs: Fix wrong value printed in unexpected UPIU response case
scsi: ufs: core: Fix NULL pointer dereference in scsi_cmd_priv() calls
scsi: megaraid_mbox: Avoid double kfree()
scsi: pm8001: Fix error code in non_fatal_log_show()
scsi: lpfc: Turn lpfc_queue q_pgs into a flexible array
scsi: ufs: core: Skip link param validation when lanes_per_direction is unset
scsi: sas: Skip opt_sectors when DMA reports no real optimization hint
scsi: Revert "scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans"
...
Pull hwmon updates from Guenter Roeck:
"New drivers for the following chips:
- Analog Devices LTC4283 Swap Controller
- Analog Devices MAX20830
- Analog Devices MAX20860A
- ARCTIC Fan Controller
- Delta E50SN12051
- Luxshare LX1308
- Microchip EMC1812/13/14/15/33
- Monolithic MP2985
- Murata D1U74T PSU
New chip support added to existing drivers:
- asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX
B850-E GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI
- dell-smm: Add Dell Latitude 7530 to fan control whitelist
- nct6683: Support for ASRock Z890 Pro-A
- pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351
- pmbus/max34440: Support for ADPM12250
- pmbus/xdp720: Support for Infineon xdp730, and fix driver issues
reported by Sashiko
New functionality:
- Add support for update_interval_us chip attribute, and support it
in ina238 driver
- Add support for guard() and scoped_guard() for subsystem locks, and
use it in adt7411, ina2xx, and lm90 drivers
- emc2305: Support configurable fan PWM at shutdown
- lm63: Expose PWM frequency and LUT hysteresis as writable
- lm75: Support active-high alert polarity
- nct7802: Add time step attributes for tweaking responsiveness
- pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter,
clear_blackbox, and firmware_revision
- raspberrypi: Fix delayed-work teardown race, add voltage input
support as well as voltage domain IDs
- mcp9982: Add support for reporting external diode faults
Miscellaneous bug fixes, changes and improvements:
- Use named initializers for platform_device_id arrays and
i2c_device_data, and remove unused driver data
- Various drivers: Move MODULE_DEVICE_TABLE next to the table itself
- ads7871: Convert to hwmon_device_register_with_info(), and use
DMA-safe buffer for SPI writes
- adt7411: document supported sysfs attributes
- adt7462: Add of_match_table to support devicetree
- adt7475: Add explicit header include
- coretemp; Fix outdated documentation, coding style issues, and
replace hardcoded core count with dynamic value
- cros_ec: Drop unused assignment of platform_device_id driver data
- emc2305: Fix fan channel index handling
- gpd-fan: Reject EC PWM value 0 as invalid, fix race condition
between device removal and sysfs access, upgrade log level from
warn to err for platform device creation failure, initialize EC
before registering hwmon device, drop global driver data and use
per-device allocation
- htu31: document debugfs serial_number
- ina238: Add support for samples and update_interval
- it87: Clamp negative values to zero in set_fan()
- lm75: Add explicit header include, Add explicit default cases in
lm75_is_visible(), and add section for sysfs interface to
documentation
- pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i
- tmp102: Use device_property_read_string API
- tmp401: Read "ti,n-factor" as signed
- Convert zyxel,nsa320-mcu to DT schema"
* tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (81 commits)
hwmon: tmp401: Read "ti,n-factor" as signed
hwmon: (pmbus/lm25066) Fix PMBus coefficients for LM5064/5066/5066i
hwmon: (gpd-fan) Reject EC PWM value 0 as invalid
hwmon: (dell-smm) Add Dell Latitude 7530 to fan control whitelist
hwmon: temperature: add support for EMC1812
dt-bindings: hwmon: temperature: add support for EMC1812
hwmon: (gpd-fan): fix race condition between device removal and sysfs access
hwmon: (gpd-fan): upgrade log level from warn to err for platform device creation failure
hwmon: (gpd-fan): Initialize EC before registering hwmon device
hwmon: (gpd-fan): drop global driver data and use per-device allocation
hwmon: (pmbus/max34440): add support adpm12250
hwmon: (ina238) Add update_interval_us attribute
hwmon: Add update_interval_us chip attribute
hwmon: (ina238) Add support for samples and update_interval
gpio: gpio-ltc4283: Add support for the LTC4283 Swap Controller
hwmon: ltc4283: Add support for the LTC4283 Swap Controller
dt-bindings: hwmon: Document the LTC4283 Swap Controller
hwmon: (pmbus/xdp720) Fix driver issues xdp720/730
hwmon: (pmbus/xdp720) Add support for efuse xdp730
dt-bindings: hwmon/pmbus: Add Infineon xdp730
...
Pull x86 cpuid updates from Ingo Molnar:
- CPUID API updates (Ahmed S. Darwish):
- Introduce a centralized CPUID parser
- Introduce a centralized CPUID data model
- Introduce <asm/cpuid/leaf_types.h>
- Rename cpuid_leaf()/cpuid_subleaf() APIs
- treewide: Explicitly include the x86 CPUID headers
- Update to x86-cpuid-db v3.1 (Maciej Wieczor-Retman)
- Continued removal of pre-i586 support and related simplifications
(Ingo Molnar)
- Add Intel CPU model number for rugged Panther Lake (Tony Luck)
- Misc fixes, updates and cleanups by Arnd Bergmann, Chao Gao, Lukas
Bulwahn, Sohil Mehta, Maciej Wieczor-Retman.
* tag 'x86-cpu-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/cpu: Make CONFIG_X86_CX8 unconditional
x86/cpu: Remove unused !CONFIG_X86_TSC code
x86/cpuid: Update bitfields to x86-cpuid-db v3.1
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.1
x86/cpu: Make CONFIG_X86_TSC unconditional
MAINTAINERS: Drop obsolete FPU EMULATOR section
x86/cpu: Fix a F00F bug warning and clean up surrounding code
x86/cpu: Add Intel CPU model number for rugged Panther Lake
x86/cpuid: Introduce a centralized CPUID parser
x86/cpu: Introduce a centralized CPUID data model
x86/cpuid: Introduce <asm/cpuid/leaf_types.h>
x86/cpuid: Rename cpuid_leaf()/cpuid_subleaf() APIs
x86/cpu: Do not include the CPUID API header in asm/processor.h
Documentation: core-api/cpu_hotplug: Remove stale cpu0_hotplug docs
x86/cpu, cpufreq: Remove AMD ELAN support
x86/fpu: Remove the math-emu/ FPU emulation library
x86/fpu: Remove the 'no387' boot option
x86/fpu: Remove MATH_EMULATION and related glue code
treewide: Explicitly include the x86 CPUID headers
x86/cpu: Remove the CONFIG_X86_INVD_BUG quirk
...
The "ti,n-factor" binding and examples allow negative correction
values. Reading it as u32 makes the helper type disagree with the
documented signed value and hides real schema mismatches.
Use the signed helper so the DT access matches the s32 value stored by
the driver.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Swap the high setting and low setting coefficients in the lm25066_coeff
table for LM5064, LM5066, and LM5066i. The coefficients were previously
mapped incorrectly, resulting in inverted current and power scaling.
Additionally, dynamically assign the exponent (R) registers inside the
probe's LM25066_DEV_SETUP_CL check. This ensures that the proper
exponent is applied (e.g., for LM25056, high setting power exponent
is -4, but low setting power exponent is -3).
Signed-off-by: Potin Lai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
This is the hwmon driver for Microchip EMC1812/13/14/15/33
Multichannel Low-Voltage Remote Diode Sensor Family.
EMC1812 has one external remote temperature monitoring channel.
EMC1813 has two external remote temperature monitoring channels.
EMC1814 has three external remote temperature monitoring channels,
channels 2 and 3 support anti parallel diode.
EMC1815 has four external remote temperature monitoring channels and
channels 1/2 and 3/4 support anti parallel diode.
EMC1833 has two external remote temperature monitoring channels and
channels 1 and 2 support anti parallel diode.
Resistance Error Correction is supported on channels 1/2 and 3/4.
Signed-off-by: Marius Cristea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Replace the manual gpd_fan_remove() callback with a devres-managed
action using devm_add_action_or_reset(). The original remove hook
resets the fan to AUTOMATIC mode, but the hwmon sysfs interface
(registered with devm_hwmon_device_register_with_info()) remains
active until after the remove callback completes. This creates a
race window where a concurrent userspace sysfs access can interleave
with the EC I/O sequence, potentially corrupting EC registers.
Using devm_add_action_or_reset() registers the reset function as a
devres action. Due to the LIFO release order of devres, the hwmon
device is unregistered (sysfs removed) before the reset action
executes, eliminating the race condition.
Fixes: 0ab88e2394 ("hwmon: add GPD devices sensor driver")
Signed-off-by: Pei Xiao <[email protected]>
Link: https://lore.kernel.org/r/4400828422cf3a88adad4db224d9efccdb1049d2.1781055639.git.xiaopei01@kylinos.cn
Signed-off-by: Guenter Roeck <[email protected]>
Move the gpd_init_ec() call to before devm_hwmon_device_register_with_info
in the probe function. With the previous ordering the hwmon device was
registered and exposed to userspace before the EC initialization
completes, creating a window where sysfs reads could return invalid values.
Some buggy firmware won't initialize EC properly on boot. Before its
initialization, reading RPM will always return 0, and writing PWM will have
no effect. So move gpd_init_ec to before hwmon device register.
Fixes: 0ab88e2394 ("hwmon: add GPD devices sensor driver")
Signed-off-by: Pei Xiao <[email protected]>
Link: https://lore.kernel.org/r/4be3734b135c8013157979ab5e80c7ee51243ddd.1781055639.git.xiaopei01@kylinos.cn
Signed-off-by: Guenter Roeck <[email protected]>
The INA238 family supports eight conversion time steps from 50 us to
4120 us (SQ52206: 66 us to 8230 us). At the millisecond granularity of
update_interval, the four shortest steps (50, 84, 150, 280 us) all
round to the same value and cannot be individually selected.
Add support for the generic update_interval_us attribute, which reports
and programs the same ADC cycle time as update_interval but in
microseconds, giving userspace full access to all conversion time steps.
Both attributes reflect the total cycle time including the active
averaging count: the reported value is the raw conversion time
multiplied by the number of averaged samples, and writes apply the
inverse mapping.
Signed-off-by: Ferdinand Schwenk <[email protected]>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-3-016b55567950@advastore.com
[groeck: Fixed some multi-line alignment issues]
Signed-off-by: Guenter Roeck <[email protected]>
Some hardware monitoring chips support update intervals below one
millisecond. The existing update_interval attribute uses millisecond
granularity, which causes sub-millisecond steps to round to the same
value and become inaccessible from userspace.
Introduce update_interval_us, a companion chip-level attribute that
expresses the same update interval in microseconds. Drivers
implementing this attribute should also implement update_interval for
compatibility with millisecond-based userspace interfaces.
Signed-off-by: Ferdinand Schwenk <[email protected]>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-2-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <[email protected]>
Expose INA238 ADC averaging count (AVG) and conversion timing
(VBUSCT/VSHCT/VTCT) through chip-level hwmon attributes:
chip/samples
chip/update_interval
Use per-chip conversion-time lookup tables so the same helpers work
for INA228/INA237/INA238/INA700/INA780 and SQ52206. Cache ADC_CONFIG
in driver data and update it on writes to avoid extra register reads
during read-modify-write updates.
Report update_interval in milliseconds as required by the hwmon ABI.
Compute it from raw ADC cycle time multiplied by the active averaging
count, and apply the inverse mapping on writes so programmed conversion
time tracks the selected sample count.
Clamp user-provided update_interval before unit scaling to prevent
overflow in arithmetic conversions.
Also combine chip attributes in HWMON_CHANNEL_INFO using a bitwise OR
for a single logical chip channel.
Signed-off-by: Ferdinand Schwenk <[email protected]>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-1-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <[email protected]>
Support the LTC4283 Hot Swap Controller. The device features programmable
current limit with foldback and independently adjustable inrush current to
optimize the MOSFET safe operating area (SOA). The SOA timer limits MOSFET
temperature rise for reliable protection against overstresses.
An I2C interface and onboard ADC allow monitoring of board current,
voltage, power, energy, and fault status.
Signed-off-by: Nuno Sá <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Pengpeng Hou