The commit in fixes introduced a high cap for delayas U64_MAX value
while ktime_t is actually s64. This is wrong cap as it becomes negative
value and any comparison to a real delay will fail to update delay
value. Use KTIME_MAX constant as correct max cap for PCIe delay.
The issue was hit in production (a negative value is observed):
# cat /sys/class/timecard/ocp0/ts_window_adjust
-3
Fixes: aa05fe67bc ("ptp: ocp: Improve PCIe delay estimation")
Signed-off-by: Vadim Fedorenko <[email protected]>
Reviewed-by: Daniel Machon <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <[email protected]>
The max_period bound in net_timer_enable_perout() was computed as:
max_period = (u64)NETC_TMR_DEFAULT_FIPER + integral_period;
which exceeds U32_MAX when integral_period > 0 (e.g. 0x100000002 for
the default 333333333 Hz clock). A period_ns that passes this check but
exceeds U32_MAX is then silently truncated when stored into the u32
struct netc_pp::period field.
A truncated value of zero can reach netc_timer_set_perout_alarm(), where
the local u32 period variable would also be 0, causing a divide-by-zero
in roundup_u64(delta, period) whenever the stime < min_time branch is
taken (which always happens for a start time of {0, 0}).
Additionally, netc_timer_enable_periodic_pulse() and
netc_timer_enable_fiper() both compute:
fiper = pp->period - integral_period;
A zero pp->period results in an unsigned wraparound to 0xFFFFFFFD,
mis-programming the FIPER hardware register.
Fix all three issues by capping max_period at NETC_TMR_DEFAULT_FIPER
(0xFFFFFFFF). This ensures that any period_ns passing the range check
fits in a u32 without truncation, so the stored value is always valid
and non-zero. The accepted range is reduced by integral_period ns
(typically only a few nanoseconds), which is negligible in practice.
Fixes: 671e266835 ("ptp: netc: add periodic pulse output support")
Signed-off-by: Wei Fang <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock
ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the
page read-only and then upgrade it to writable with mprotect(), after
which the guest can corrupt the host-written timekeeping data (sequence
counter, UTC time, TSC offset) that the vmclock ABI defines as read-only.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 does for its read-only objects and as fixed in drm/vc4
(CVE-2026-68445) and drm/panthor (CVE-2024-53071).
Cc: [email protected]
Fixes: 2050327242 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Signed-off-by: Abdifatah Suruur <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
When userspace calls ioctl(PTP_PEROUT_REQUEST) with period = 0 to disable
a PEROUT channel that is not enabled, the driver incorrectly enters the
disable path. Since the channel's struct netc_pp was previously zeroed,
pp->alarm_id evaluates to 0, causing priv->fs_alarm_bitmap &= ~BIT(0) to
silently revoke the alarm 0 allocation from whichever channel is actively
using it. This can cause two channels conflict over the same hardware
alarm configuration and corrupt their periodic output signals.
Therefore, guard the disable path with a check on pp->enabled and return
early if the channel is not enabled.
Fixes: 671e266835 ("ptp: netc: add periodic pulse output support")
Reported-by: Sashiko <[email protected]>
Closes: https://sashiko.dev/#/message/20260809031908.46EBF1F00A3A%40smtp.kernel.org
Signed-off-by: Wei Fang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Commit 42e2a9e11a ("net: phy: dp83640: improve phydev and driver
removal handling") moved per-bus clock cleanup from module exit to the
remove path. This leaves two lifetime problems.
dp83640_clock_get_bus() publishes a newly allocated clock before the
driver allocates its per-PHY data and registers the PTP clock. If either
operation fails, no PHY is bound and the remove callback cannot release
the clock, leaking the clock and the MII bus device reference.
The remove path can also free a clock after dropping clock_lock. A
concurrent probe may already have found the clock under
phyter_clocks_lock and be waiting for clock_lock, allowing it to acquire
a freed mutex and access the freed clock.
Use the PHY package infrastructure for the per-bus clock. PHY packages
are tracked per MII bus, and the driver uses BROADCAST_ADDR as the
package key so the DP83640 PHYs on the same bus share the same clock
storage. Call phy_package_join() during probe and phy_package_leave() on
probe errors and in remove.
Serialize the one-time clock initialization with the package lock because
phy_package_probe_once() elects an initializer but does not wait for
initialization to finish.
Cc: [email protected] # untested fix to a driver init path
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Xuanqiang Luo <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
The EEPROM board ID is a fixed 13-byte field and is not guaranteed to
contain a NUL terminator. Passing it directly to
devlink_info_version_fixed_put() treats it as a C string and may read
beyond the field.
Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer
before reporting the ID. Use a precision limit because the snprintf()
output size alone does not bound the source string scan.
Fixes: 0cfcdd1ebc ("ptp: ocp: add nvmem interface for accessing eeprom")
Cc: [email protected]
Signed-off-by: Ahmad Byagowi <[email protected]>
Reviewed-by: Vadim Fedorenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
ptp_clock_register() exposes the clock to userspace. If either following
initialization operation fails, probe returns and devres frees idtfc3 while
the registered clock still refers to the clock information embedded in it.
Complete the fallible initialization before registering the clock. Schedule
the worker after registration because it requires the registered clock.
This removes post-registration failures and avoids exposing a partially
initialized clock.
Cc: [email protected] # untested fix to a driver init path race
Co-developed-by: Ijae Kim <[email protected]>
Signed-off-by: Ijae Kim <[email protected]>
Signed-off-by: Myeonghun Pak <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
ptp_clock_adjtime() validates an ADJ_FREQUENCY request by converting the
requested scaled ppm to ppb and comparing it against ops->max_adj:
long ppb = scaled_ppm_to_ppb(tx->freq);
if (ppb > ops->max_adj || ppb < -ops->max_adj)
return -ERANGE;
scaled_ppm_to_ppb() computes (1 + ppm) * 125 >> 13 in s64. For a
sufficiently large tx->freq the multiplication overflows s64 and wraps,
so the resulting ppb can fall back within [-max_adj, max_adj] and pass
the check. The unclamped tx->freq is then handed to ->adjfine(), where
drivers scale it again (e.g. scaled_ppm * 762939453125 in ptp_idt82p33)
and program a bogus frequency word.
For example tx->freq = 147573952589676412 makes (1 + ppm) * 125 equal
2^64 + 9, which wraps to ppb == 0 and is accepted.
The caller already has write access to the PHC, so this hardens the
max_adj sanity check rather than crossing a privilege boundary, and
well-behaved user space (e.g. ptp4l) never requests such values. It is
a follow-up to commit 475b92f932 ("ptp: improve max_adj check against
unreasonable values"), which handled the analogous s32 narrowing but not
this multiplication overflow.
Detect the overflow with check_*_overflow() and reject the request in
ptp_clock_adjtime() instead of acting on the wrapped value.
Signed-off-by: Deep Shah <[email protected]>
Reviewed-by: Vadim Fedorenko <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
In netc_timer_remove(), hardware interrupts are disabled by clearing
TMR_TEMASK before ptp_clock_unregister() is called. This may cause a
race condition during driver unbind that could leave hardware interrupts
active. For example, a concurrent PTP_CLK_REQ_EXTTS ioctl can re-enable
TMR_TEMASK after it has been cleared, leaving a pending hardware
interrupt when the driver unbinds.
Since the NETC Timer does not support PCIe FLR, hardware state is not
reset during probe. When the driver is rebound and the IRQ is registered,
the pending interrupt fires immediately. At that point priv->tmr_emask
is still zero, so netc_timer_isr() does not clear the interrupt status
and unconditionally returns IRQ_HANDLED, resulting in an uninterruptible
infinite interrupt storm.
Fix this in several ways. First, request the IRQ with IRQF_NO_AUTOEN so
it is not enabled when request_irq() runs, and clear TMR_TEMASK in
netc_timer_init() before enabling it. The IRQ is only enabled at the end
of probe once the timer has been reprogrammed and the PTP clock has been
registered. This ensures a stale pending interrupt from a previous unbind
or an unclean shutdown cannot be delivered before the driver is fully
initialized.
Second, in netc_timer_remove() call disable_irq() before
ptp_clock_unregister() and move the TMR_TEMASK/TMR_CTRL clearing after
it. disable_irq() masks the line and waits for any in-flight
netc_timer_isr() to finish, so no ISR can dereference priv->clock after
ptp_clock_unregister() has freed it. Unregistering the PTP clock before
clearing the mask also guarantees that no in-flight or concurrent ioctl
can re-enable hardware interrupts.
Finally, return IRQ_NONE from netc_timer_isr() when the masked event
status is zero, so the kernel's spurious interrupt detection can disable
a stuck line instead of looping forever.
Fixes: 671e266835 ("ptp: netc: add periodic pulse output support")
Reported-by: Sashiko <[email protected]>
Closes: https://sashiko.dev/#/patchset/20260720012508.23227-1-wei.fang%40oss.nxp.com
Signed-off-by: Wei Fang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
The NETC timer does not support function level reset, so TMR_OFF_L/H
registers are not cleared by pcie_flr(). If TMR_OFF was set to a
non-zero value in a previous binding, it will persist across driver
rebind and cause inaccurate PTP time.
There is also a hardware issue: after a warm reset or soft reset,
TMR_OFF_L/H registers appear to be cleared to zero, but the timer clock
domain internally retains the stale value. When the timer is re-enabled,
TMR_CUR_TIME continues to track the old offset until TMR_OFF is written
explicitly. This can cause incorrect PTP timestamps and even PTP clock
synchronization failures.
Per the recommendation from the IP team, explicitly write 0 to TMR_OFF
in netc_timer_init() to flush the internally cached value and ensure
TMR_CUR_TIME follows the freshly initialized counter.
Fixes: 87a201d599 ("ptp: netc: add NETC V4 Timer PTP driver support")
Signed-off-by: Clark Wang <[email protected]>
Signed-off-by: Wei Fang <[email protected]>
Reviewed-by: Vadim Fedorenko <[email protected]>
Reviewed-by: Breno Leitao <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Pull bitmap updates from Yury Norov:
"This includes the new FIELD_GET_SIGNED() helper,
bitmap_print_to_pagebuf() removal, RISCV/bitrev support, and a couple
cleanups.
- new handy helper FIELD_GET_SIGNED() (Yury)
- arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy)
- __bf_shf() simplification (Yury)
- bitmap_print_to_pagebuf() removal (Yury)
- RISCV/bitrev conditional support (Jindie, Yury)"
* tag 'bitmap-for-7.2' of https://github.com/norov/linux:
MAINTAINERS: BITOPS: include bitrev.[ch]
arch/riscv: Add bitrev.h file to support rev8 and brev8
bitops: Define generic___bitrev8/16/32 for reuse
lib/bitrev: Introduce GENERIC_BITREVERSE
arch: select HAVE_ARCH_BITREVERSE conditionally on BITREVERSE
bitmap: fix find helper documentation
bitmap: drop bitmap_print_to_pagebuf()
cpumask: switch cpumap_print_to_pagebuf() to using scnprintf()
bitfield: wire __bf_shf to __builtin_ctzll
bitops: use common function parameter names
ptp: switch to using FIELD_GET_SIGNED()
rtc: rv3032: switch to using FIELD_GET_SIGNED()
wifi: rtw89: switch to using FIELD_GET_SIGNED()
iio: mcp9600: switch to using FIELD_GET_SIGNED()
iio: pressure: bmp280: switch to using FIELD_GET_SIGNED()
iio: magnetometer: yas530: switch to using FIELD_GET_SIGNED()
iio: intel_dc_ti_adc: switch to using FIELD_GET_SIGNED()
x86/extable: switch to using FIELD_GET_SIGNED()
bitfield: add FIELD_GET_SIGNED()
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
Pull timekeeping updates from Thomas Gleixner:
"Updates for NTP/timekeeping and PTP:
- Expand timekeeping snapshot mechanisms
The various snapshot functions are mostly used for PTP to collect
"atomic" snapshots of various involved clocks.
They lack support for the recently introduced AUX clocks and do not
provide the underlying counter value (e.g. TSC) to user space.
Exposing the counter value snapshot allows for better control and
steering.
Convert the hard wired ktime_get_snapshot() to take a clock ID,
which allows the caller to select the clock ID to be captured along
with CLOCK_MONONOTONIC_RAW. Additionally capture the underlying
hardware counter value and the clock source ID of the counter.
Expand the hardware based snapshot capture where devices provide a
mechanism to snapshot the hardware PTP clock and the system counter
(usually via PCI/PTM) to support AUX clocks and also provide the
captured counter value back to the caller and not only the clock
timestamps derived from it.
- Add a new optional read_snapshot() callback to clocksources
That is required to capture atomic snapshots from clocksources
which are derived from TSC with a scaling mechanism (e.g. Hyper-V,
KVMclock).
The value pair is handed back in the snapshot structure to the
callers, so they can do the necessary correlations in a more
precise way.
This touches usage sites of the affected functions and data structure
all over the tree, but stays fully backwards compatible for the
existing user space exposed interfaces. New PTP IOCTLs will provide
access to the extended functionality in later kernel versions"
* tag 'timers-ptp-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (28 commits)
ptp: vmclock: Use hw_cycles from snapshot for precise TSC pairing
x86/kvmclock: Implement read_snapshot() for kvmclock clocksource
clocksource/hyperv: Implement read_snapshot() for TSC page clocksource
timekeeping: Add clocksource read_snapshot() method and hw_cycles to snapshot
ptp: Switch to ktime_get_snapshot_id() for pre/post timestamps
timekeeping: Add support for AUX clock cross timestamping
timekeeping: Remove system_device_crosststamp::sys_realtime
ALSA: hda/common: Use system_device_crosststamp::sys_systime
wifi: iwlwifi: Use system_device_crosststamp::sys_systime
ptp: Use system_device_crosststamp::sys_systime
timekeeping: Prepare for cross timestamps on arbitrary clock IDs
timekeeping: Remove ktime_get_snapshot()
virtio_rtc: Use provided clock ID for history snapshot
net/mlx5: Use provided clock ID for history snapshot
igc: Use provided clock ID for history snapshot
ice/ptp: Use provided clock ID for history snapshot
wifi: iwlwifi: Adopt PTP cross timestamps to core changes
timekeeping: Add CLOCK ID to system_device_crosststamp
timekeeping: Add system_counterval_t to struct system_device_crosststamp
timekeeping: Add CLOCK_AUX support for ktime_get_snapshot_id()
...
The shutdown callback was never implemented for this driver, but it's
needed because .remove() callback is never called during kexec/reboot
process. That leaves HW with some interrupts enabled and may cause
spurious interrupt while booting into a new kernel during with kexec.
If it happens that I2C interrupt fires during kexec, the whole I2C bus
is disabled leaving TimeCard with no devlink communication. The same
happens if timestampers were enabled, leaving the card without
timestamper interrupts until full reboot cycle.
Implement .shutdown() callback with the same function as remove
callback.
Signed-off-by: Vadim Fedorenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e ("net: txgbe: rework service event handling")
57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b7 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <[email protected]>
Commit a60fc3294a ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight.
Fixes: a60fc3294a ("ptp: rework ptp_clock_unregister() to disable events")
Signed-off-by: Vadim Fedorenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
When the system clocksource is kvmclock or Hyper-V (not the TSC directly),
vmclock_get_crosststamp() falls through to a separate get_cycles() call,
losing the atomic pairing between the system time snapshot and the TSC
reading.
Now that ktime_get_snapshot_id() populates hw_cycles with the underlying
TSC value for derived clocksources, use it when available. This gives a
perfect (system_time, tsc) pairing for the device time calculation.
The SUPPORT_KVMCLOCK wrapper is still needed to convert the TSC into
kvmclock nanoseconds for system_counter->cycles, because otherwise
get_device_system_crosststamp() can't interpret the result against the
system clock.
Signed-off-by: David Woodhouse <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Assisted-by: Kiro:claude-opus-4.6-1m
Link: https://patch.msgid.link/[email protected]
To prepare for a new PTP IOCTL, which exposes the raw counter value along
with the requested system time snapshot, switch the pre/post time stamp
sampling over to use ktime_get_snapshot_id() and fix up all usage sites.
No functional change intended.
The ptp_vmclock conversion was simplified by David Woodhouse.
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: David Woodhouse <[email protected]>
Tested-by: Arthur Kiyanovski <[email protected]>
Reviewed-by: David Woodhouse <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Acked-by: Vadim Fedorenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
The normal capture for system/device cross timestamps is CLOCK_REALTIME,
but that's meaningless for AUX clocks.
Add a clock_id field to struct system_device_crosststamp and initialize it
with CLOCK_REALTIME at the two places which prepare for cross
timestamps.
After the related code has been cleaned up, the core code will honor the
clock_id field when calculating the system time from the system counter
snapshot.
No functional change.
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: David Woodhouse <[email protected]>
Tested-by: Arthur Kiyanovski <[email protected]>
Reviewed-by: David Woodhouse <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/[email protected]
ktime_get_snapshot() is replaced by ktime_get_snapshot_id() which allows to
request a particular CLOCK ID to be captured along with the clocksource
counter.
Convert vmclock over and use the new system_time_snapshot::systime field,
which holds the system timestamp selected by the CLOCK ID argument.
No functional change intended.
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: David Woodhouse <[email protected]>
Tested-by: Arthur Kiyanovski <[email protected]>
Reviewed-by: David Woodhouse <[email protected]>
Reviewed-by: Thomas Weißschuh <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/[email protected]
The usage of PTP vClocks leads immediately to the following issues with
ptp4l with LOCKDEP and DEBUG_ATOMIC_SLEEP enabled: "BUG: sleeping function
called from invalid context".
ptp_convert_timestamp() acquires a mutex_t within a RCU read section. This
is illegal, because acquiring a mutex_t can result in voluntary scheduling
request which is not allowed within a RCU read section.
Replace the RCU usage with SRCU where sleeping is allowed.
Reported-by: Florian Zeitz <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Fixes: 67d93ffc0f ("ptp: vclock: use mutex to fix "sleep on atomic" bug")
Signed-off-by: Kurt Kanzenbach <[email protected]>
Reviewed-by: Sebastian Andrzej Siewior <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't calculate the fields length explicitly.
Signed-off-by: Yury Norov <[email protected]>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the PTP VMware ACPI driver to a platform
one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/[email protected]/ [1]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Add support for the Adva TimeCard model built on a Xilinx-based design.
This patch enables detection and integration of the new hardware within
the existing OCP timecard framework.
The Xilinx variant relies on the shared driver infrastructure, requiring
only small, targeted additions to accommodate its specific
characteristics.
Signed-off-by: Sagi Maimon <[email protected]>
Reviewed-by: Vadim Fedorenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <[email protected]>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <[email protected]>
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Update existing DPLL drivers to utilize the DPLL reference count
tracking infrastructure.
Add dpll_tracker fields to the drivers' internal device and pin
structures. Pass pointers to these trackers when calling
dpll_device_get/put() and dpll_pin_get/put().
This allows developers to inspect the specific references held by this
driver via debugfs when CONFIG_DPLL_REFCNT_TRACKER is enabled, aiding
in the debugging of resource leaks.
Reviewed-by: Aleksandr Loktionov <[email protected]>
Signed-off-by: Ivan Vecera <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Add support for the REF_TRACKER infrastructure to the DPLL subsystem.
When enabled, this allows developers to track and debug reference counting
leaks or imbalances for dpll_device and dpll_pin objects. It records stack
traces for every get/put operation and exposes this information via
debugfs at:
/sys/kernel/debug/ref_tracker/dpll_device_*
/sys/kernel/debug/ref_tracker/dpll_pin_*
The following API changes are made to support this:
1. dpll_device_get() / dpll_device_put() now accept a 'dpll_tracker *'
(which is a typedef to 'struct ref_tracker *' when enabled, or an empty
struct otherwise).
2. dpll_pin_get() / dpll_pin_put() and fwnode_dpll_pin_find() similarly
accept the tracker argument.
3. Internal registration structures now hold a tracker to associate the
reference held by the registration with the specific owner.
All existing in-tree drivers (ice, mlx5, ptp_ocp, zl3073x) are updated
to pass NULL for the new tracker argument, maintaining current behavior
while enabling future debugging capabilities.
Reviewed-by: Aleksandr Loktionov <[email protected]>
Co-developed-by: Petr Oros <[email protected]>
Signed-off-by: Petr Oros <[email protected]>
Signed-off-by: Ivan Vecera <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
To output UTC would involve complex calculations about whether the time
elapsed since the reference time has crossed the end of the month when
a leap second takes effect. I've prototyped that, but it made me sad.
Much better to report TAI, which is what PHCs should do anyway.
And much much simpler.
Signed-off-by: David Woodhouse <[email protected]>
Signed-off-by: Babis Chalios <[email protected]>
Tested-by: Takahiro Itazuri <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
As we finalised the spec, we spotted that vmgenid actually says that the
_HID is supposed to be hypervisor-specific. Although in the 13 years
since the original vmgenid doc was published, nobody seems to have cared
about using _HID to distinguish between implementations on different
hypervisors, and we only ever use the _CID.
For consistency, match the _CID of "VMCLOCK" too.
Signed-off-by: David Woodhouse <[email protected]>
Signed-off-by: Babis Chalios <[email protected]>
Tested-by: Takahiro Itazuri <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Add device tree support to the ptp_vmclock driver, allowing it to probe
via device tree in addition to ACPI.
Handle optional interrupt for clock disruption notifications, mirroring
the ACPI notification behaviour.
Although the interrupt is marked as 'optional' in the DT bindings, if
the device *advertises* the VMCLOCK_FLAG_NOTIFICATION_ABSENT then it
*should* have an interrupt. The driver will refuse to initialize if not.
Signed-off-by: David Woodhouse <[email protected]>
Signed-off-by: Babis Chalios <[email protected]>
Signed-off-by: Takahiro Itazuri <[email protected]>
Tested-by: Takahiro Itazuri <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Add optional support for device notifications in VMClock. When
supported, the hypervisor will send a device notification every time it
updates the seq_count to a new even value.
Moreover, add support for poll() in VMClock as a means to propagate this
notification to user space. poll() will return a POLLIN event to
listeners every time seq_count changes to a value different than the one
last seen (since open() or last read()/pread()). This means that when
poll() returns a POLLIN event, listeners need to use read() to observe
what has changed and update the reader's view of seq_count. In other
words, after a poll() returned, all subsequent calls to poll() will
immediately return with a POLLIN event until the listener calls read().
The device advertises support for the notification mechanism by setting
flag VMCLOCK_FLAG_NOTIFICATION_PRESENT in vmclock_abi flags field. If
the flag is not present the driver won't setup the ACPI notification
handler and poll() will always immediately return POLLHUP.
Signed-off-by: Babis Chalios <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>
Signed-off-by: Takahiro Itazuri <[email protected]>
Reviewed-by: David Woodhouse <[email protected]>
Tested-by: Takahiro Itazuri <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Yury Norov (NVIDIA) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/[email protected]
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
Vadim Fedorenko