Adds configuration HID driver for the MSI Claw series of handheld PC's.
In this initial patch add the initial driver outline and attributes for
changing the gamepad mode, M-key behavior, and add a WO reset function.
Sending the SWITCH_MODE and RESET commands causes a USB disconnect in
the device. The completion will therefore never get hit and would trigger
an -EIO. To avoid showing the user an error for every write to these
attrs a bypass for the completion handling is introduced when timeout ==
0.
The initial version of this patch was written by Denis Benato, which
contained the initial reverse-engineering and implementation for the
gamepad mode switching. This work was later expanded by Zhouwang Huang
to include more gamepad modes. Finally, I refactored the drivers data
in/out flow and overall format to conform to kernel driver best
practices and style guides. Claude was used as an initial reviewer of
this patch.
Assisted-by: Claude:claude-sonnet-4-6
Co-developed-by: Denis Benato <[email protected]>
Signed-off-by: Denis Benato <[email protected]>
Co-developed-by: Zhouwang Huang <[email protected]>
Signed-off-by: Zhouwang Huang <[email protected]>
Signed-off-by: Derek J. Clark <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
The tap-to-mute button of the HyperX QuadCast 2 (03f0:07b4) is handled
entirely in the device firmware. The firmware gates the audio internally
but never sends the Telephony "Phone Mute" usage (0x2f) that its own report
descriptor advertises, and it does not touch the UAC feature unit either.
Consequently neither an evdev key event nor an ALSA mixer change is ever
generated, and userspace has no way to learn that the microphone was muted:
desktops keep showing the microphone as live, and conferencing applications
keep displaying an unmuted microphone while transmitting silence.
The mute state is reported through a vendor-defined collection instead:
06 c0 ff Usage Page (Vendor-Defined 0xFFC0)
a1 01 Collection (Application)
06 c1 ff Usage Page (Vendor-Defined 0xFFC1)
85 77 Report ID (0x77)
09 f0 Usage (0xF0)
75 08 95 3f Report Size (8), Report Count (63)
81 02 Input (Data,Var,Abs)
Pressing the button emits a 64-byte report on that collection:
77 06 00 00 ... microphone unmuted
77 06 01 00 ... microphone muted
where byte 1 identifies the mute event and byte 2 carries the resulting
state. As the payload is an opaque vendor blob carrying no HID usages,
hid-input cannot map it and a hwdb entry cannot express it either.
Add a driver that decodes the report and emits KEY_MICMUTE, which makes the
button behave like any other microphone mute key.
Note that the device reports the resulting absolute state, whereas
KEY_MICMUTE is a momentary key that userspace acts on as a toggle, so the
driver emits one keypress per state change.
Tested on a HyperX QuadCast 2 (03f0:07b4).
Signed-off-by: Benjamin Blume <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Move all Arctis headset code (battery monitoring, wireless status,
power supply registration, raw event handling) from hid-steelseries.c
into the new hid-steelseries-arctis.c driver module.
hid-steelseries.c keeps the SRWS1 racing wheel and the MSI RGB LED
devices, while hid-steelseries-arctis.c handles the Arctis 1 (Xbox) and
Arctis 9 wireless headsets with their own device table, probe, remove,
and raw_event implementations.
Signed-off-by: Sriman Achanta <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Adds OneXPlayer HID configuration driver. In this initial driver patch,
add the RGB interface for the first generation of HID based RGB control.
This interface provides the following attributes:
- brightness: provided by the LED core, this works in a fairly unique
way on this device. The hardware accepts 5 brightness values (0-4),
which affects the brightness of the multicolor and animated effects
built into the MCU firmware. For monocolor settings, the device
expects the hardware brightness value to be pushed to maximum, then we
apply brightness adjustments mathematically based on % (0-100). This
leads to some odd conversion as we need the brightness slider to reach
the full range, but it has no affect when incrementing between the
division points for other effects.
- multi-intensity: provided by the LED core for red, green, and blue.
- effect: Allows the MCU to set 19 individual effects.
- effect_index: Lists the 19 valid effect names for the interface.
- enabled: Allows the MCU to toggle the RGB interface on/off.
- enabled_index: Lists the valid states for enabled.
- speed: Allows the MCU to set the animation rate for the various
effects.
- speed_range: Lists the valid range of speed (0-9).
The MCU also has a few odd quirks that make sending multiple synchronous
events challenging. It will essentially freeze if it receives another
message before it has finished processing the last command. It also will
not reply if you wait on it using a completion. To get around this, we
do a 200ms sleep inside a work queue thread and debounce all but the most
recent message using a 50ms mod_delayed_work. This will cache the last
write, queue the work, then return so userspace can release its write
thread. The work queue is only used for brightness/multi-intensity as
that is the path likely to receive rapid successive writes.
Reviewed-by: Zhouwang Huang <[email protected]>
Tested-by: Zhouwang Huang <[email protected]>
Signed-off-by: Derek J. Clark <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
The Rakk Dasig X gaming mouse has a faulty HID report descriptor that
declares USAGE_MAXIMUM=3 (buttons 1-3) while actually sending 5 button
bits (REPORT_COUNT=5). This causes the kernel to ignore side buttons
(buttons 4 and 5).
Fix by patching the descriptor to set USAGE_MAXIMUM=5 in the
report_fixup callback.
The mouse uses Telink vendor ID 0x248a with three product IDs for USB
direct (0xfb01), wireless dongle (0xfa02), and Bluetooth (0x8266)
connection modes. All three variants have the same bug at byte offset 17.
Suggested-by: Terry Junge <[email protected]>
Signed-off-by: Karl Cayme <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
When the Huawei CD30 USB keyboard undergoes 500 reboot cycles,
initialization may fail due to a report descriptor problem.
The error log is as follows:
[pid:175,cpu0,kworker/0:1,6]usb 1-1.2.2: new low-speed USB device number 6 using xhci-hcd
[pid:175,cpu0,kworker/0:1,9]usb 1-1.2.2: New USB device found, idVendor=12d1, idProduct=109b, bcdDevice= 1.03
[pid:175,cpu0,kworker/0:1,0]usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[pid:175,cpu0,kworker/0:1,1]usb 1-1.2.2: Product: HUAWEI USB Wired Keyboard
[pid:175,cpu0,kworker/0:1,2]usb 1-1.2.2: Manufacturer: HUAWEI
[pid:175,cpu0,kworker/0:1,4]input: HUAWEI HUAWEI USB Wired Keyboard as /devices/platform/efc00000.hisi_usb/efc00000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:12D1:109B.0002/input/input6
[pid:175,cpu0,kworker/0:1,5]hid-generic 0003:12D1:109B.0002: input,hidraw1: USB HID v1.10 Keyboard [HUAWEI HUAWEI USB Wired Keyboard] on usb-xhci-hcd.1.auto-1.2.2/input0
[pid:175,cpu0,kworker/0:1,9]hid-generic 0003:12D1:109B.0003: collection stack underflow
[pid:175,cpu0,kworker/0:1,0]hid-generic 0003:12D1:109B.0003: item 0 0 0 12 parsing failed
[pid:175,cpu0,kworker/0:1,1]hid-generic: probe of 0003:12D1:109B.0003 failed with error -22
...
When encountering such a situation, fix it with the correct report descriptor.
Signed-off-by: Miao Li <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Adds initial framework for a new HID driver, hid-lenovo-go-s, along with
a uevent to report the firmware version for the MCU.
This driver primarily provides access to the configurable settings of the
Lenovo Legion Go S controller. It will attach if the controller is in
xinput or dinput mode. Non-configuration raw reports are forwarded to
ensure the other endpoints continue to function as normal.
Reviewed-by: Mark Pearson <[email protected]>
Co-developed-by: Mario Limonciello <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Co-developed-by: Ethan Tidmore <[email protected]>
Signed-off-by: Ethan Tidmore <[email protected]>
Signed-off-by: Derek J. Clark <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Adds initial framework for a new HID driver, hid-lenovo-go, along with
attributes that report the firmware and hardware version for each
component of the HID device, of which there are 4 parts: The MCU, the
transmission dongle, the left "handle" controller half, and the right
"handle" controller half. Each of these devices are provided an attribute
group to contain its device specific attributes. Additionally, the touchpad
device attributes are logically separated from the other components in
another attribute group.
This driver primarily provides access to the configurable settings of the
Lenovo Legion Go and Lenovo Legion Go 2 controllers running the latest
firmware. As previously noted, the Legion Go controllers recently had a
firmware update[1] which switched from the original "SepentiaUSB" protocol
to a brand new protocol for the Go 2, primarily to ensure backwards and
forwards compatibility between the Go and Go 2 devices. As part of that
update the PIDs for the controllers were changed, so there is no risk of
this driver attaching to controller firmware that it doesn't support.
--
v6:
- Make attributes static.
- Use NULL instead of 0 in mcu_propery_out when there is no data.
v5:
- Make version attributes static, retrieve them using delayed work
during probe.
- Fix endianness of version strings and print as hex.
v3:
- Add hid-lenovo.c and Mark Pearson to LENOVO HID DRIVERS entry in MAINTAINERS
Reviewed-by: Mark Pearson <[email protected]>
Signed-off-by: Derek J. Clark <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
This patch adds support for handling the side buttons
on the RAPOO 0x2015 wireless mouse. These buttons were
previously not generating input events due to missing
driver logic.
The new code handles raw HID input report with Report
ID 1 and maps the side buttons to KEY_BACK and KEY_FORWARD
using the input subsystem.
Tested on a RAPOO mouse with USB ID 24AE:2015.
Signed-off-by: Nguyen Dinh Dang Duong <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Define a new structure that contains simple haptic device configuration
as well as current state.
Add functions that recognize auto trigger and manual trigger reports
as well as save their addresses.
Verify that the pressure unit is either grams or newtons.
Mark the input device as a haptic touchpad if the unit is correct and
the reports are found.
Signed-off-by: Angela Czubak <[email protected]>
Co-developed-by: Jonathan Denose <[email protected]>
Signed-off-by: Jonathan Denose <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
From: Tomasz Pakuła <[email protected]>
This patch series is focused on improving the compatibility and usability of the
hid-pidff force feedback driver. Last patch introduces a new, universal driver
for PID devices that need some special handling like report fixups, remapping the
button range, managing new pidff quirks and setting desirable fuzz/flat values.
This work has been done in the span of the past months with the help of the great
Linux simracing community, with a little input from sim flight fans from FFBeast.
No changes interfere with compliant and currently working PID devices.
"Generic" codepath was tested as well with Moza and Simxperience AccuForce v2.
I'm not married to the name. It's what we used previously, but if "universal" is
confusing (pidff is already the generic driver), we can come up with something
better like "hid-quirky-pidff" :)
With v8 and tiny finx in v9, all the outstanding issues were resolved,
additional pidff issues were fixed and hid-pidff defines moved to a dedicated
header file. This patch series could be considered done bar any comments and
requests from input maintainers.
I could save more then a dozen lines of code by changing simple if statements
to only occupy on line instead of two in there's a need for that.
The line
obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ish-hid/
in top-level HID Makefile is both superfluous (as CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
depends on CONFIG_INTEL_ISH_HID, which contains intel-ish-hid/ already) and wrong (as it's
missing the CONFIG_ prefix).
Just remove it.
Fixes: 91b228107d ("HID: intel-ish-hid: ISH firmware loader client driver")
Reported-by: Jiri Slaby <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
The Touch Bars found on x86 Macs support two USB configurations: one
where the device presents itself as a HID keyboard and can display
predefined sets of keys, and one where the operating system has full
control over what is displayed. This commit adds a driver for the
display functionality of the first configuration.
Note that currently only T2 Macs are supported.
This driver is based on previous work done by Ronald Tschalär
<[email protected]>.
Signed-off-by: Kerem Karabay <[email protected]>
Co-developed-by: Aditya Garg <[email protected]>
Signed-off-by: Aditya Garg <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
This commit adds a driver for the backlight of Apple Touch Bars on x86
Macs. Note that currently only T2 Macs are supported.
This driver is based on previous work done by Ronald Tschalär
<[email protected]>.
Signed-off-by: Kerem Karabay <[email protected]>
Co-developed-by: Aditya Garg <[email protected]>
Signed-off-by: Aditya Garg <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Extend pidff compatibility, usable button range, manage pidff quirks and
set improved fuzz/flat default for high precision devices. Possibility
of fixing device descriptors in the future if such needs arises.
As many of PID devices are quite similar and not dependent on
custom drivers, this one can handle all of PID devices which
need special care.
Numerous sim racing/sim flight bases report a lot of buttons
in excess of 100. Moza Racing exposes 128 of them and thus
the need to extend the available range.
All the included devices were tested and confirmed working
with the help of the sim racing community.
Changes in v6:
- Support "split" devices with a separate "input device" for buttons
- Fixed comment styling
Co-developed-by: Makarenko Oleg <[email protected]>
Signed-off-by: Makarenko Oleg <[email protected]>
Signed-off-by: Tomasz Pakuła <[email protected]>
Reviewed-by: Michał Kopeć <[email protected]>
Reviewed-by: Paul Dino Jones <[email protected]>
Tested-by: Cristóferson Bueno <[email protected]>
Tested-by: Pablo Cisneros <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
In this initial the battery is only probed once, a following patch will add
periodic checking.
Signed-off-by: Lode Willems <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Introduce a driver for the Corsair Void family of headsets, supporting:
- Battery reporting (power_supply)
- Sidetone setting support
- Physical microphone location reporting
- Headset and receiver firmware version reporting
- Built-in alert triggering
- USB wireless_status
Tested with a Void Pro Wireless, Void Elite Wireless and a Void Elite Wired
Signed-off-by: Stuart Hayhurst <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
This patch introduces a new driver to support the Goodix GT7986U
touch controller. This device is not compatible with Microsoft's
HID-over-SPI protocol and therefore needs to implement its own
flavor. The data reported is packaged according to the HID
protocol but uses SPI for communication to improve speed. This
enables the device to transmit not only coordinate data but also
corresponding raw data that can be accessed by user-space programs
through the hidraw interface. The raw data can be utilized for
functions like palm rejection, thereby improving the touch experience.
Key features:
- Device connection confirmation and initialization
- IRQ-based event reporting to the input subsystem
- Support for HIDRAW operations (GET_REPORT and SET_REPORT)
Reviewed-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Charles Wang <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
The hid-uclogic-params.o and hid-uclogic-rdesc.o files are linked
into both the driver module and the unit test, which triggers a
W=1 warning:
scripts/Makefile.build:236: drivers/hid/Makefile: hid-uclogic-rdesc.o is added to multiple modules: hid-uclogic hid-uclogic-test
scripts/Makefile.build:236: drivers/hid/Makefile: hid-uclogic-params.o is added to multiple modules: hid-uclogic hid-uclogic-test
Avoids this by moving these two files into a separate module
that is used by the driver and the unit test.
Reported-by: Arnd Bergmann <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
WinWing Orion2 throttle works with Linux out of box,
but the kernel sees only 16 of 47 buttons on the throttle base.
This module enables all buttons, and also adds LED controls.
Button numbers 0 .. 63 on Orion2 are reserved for throttle grip;
the throttle base buttons have numbers 64 .. 110.
Linux kernel HID subsystem only supports up to 80 buttons.
Remap throttle base buttons to numbers 32 .. 78,
reserving only numbers 0 .. 31 for buttons on the grip handle.
Changes since v2:
- Fixed automatic line wraps added by mail client
Changes since v1:
- Fixed formatting of descriptor byte array;
- Using product codes of Winwing grips in config.
Signed-off-by: Ivan Gorinov <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Added a gpiochip compatible driver to control the 8 GPIOs of
the MCP2200 by using the HID interface.
Using GPIOs with alternative functions (GP0<->SSPND, GP1<->USBCFG,
GP6<->RXLED, GP7<->TXLED) will reset the functions, if set (unset by
default).
The driver was tested while also using the UART of the chip. Setting
and reading the GPIOs has no effect on the UART communication. However,
a reset is triggered after the CONFIGURE command. If the GPIO Direction
is constantly changed, this will affect the communication at low baud
rates. This is a hardware problem of the MCP2200 and is not caused by
the driver.
Signed-off-by: Johannes Roith <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Add a hid-google-stadiaff module to support rumble based force feedback
on the Google Stadia controller. This works using the HID output
endpoint exposed on both the USB and BLE interface.
Signed-off-by: Fabio Baltieri <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Supports the Thunderstrike (SHIELD 2017) controller. Implements support for
the Thunderstrike HOSTCMD firmware interface. Adds sysfs attributes about a
SHIELD device and introduces haptics support for controllers.
Signed-off-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Initial support of HID-BPF (Benjamin Tissoires)
The history is a little long for this series, as it was intended to be
sent for v6.2. However some last minute issues forced us to postpone it
to v6.3.
Conflicts:
* drivers/hid/i2c-hid/Kconfig:
commit bf7660dab3 ("HID: stop drivers from selecting CONFIG_HID")
conflicts with commit 2afac81dd1 ("HID: fix I2C_HID not selected
when I2C_HID_OF_ELAN is")
the resolution is simple enough: just drop the "default" and "select"
lines as the new commit from Arnd is doing
For now only supports one model and only filters out bogus reports sent
when the keyboard has been configured through hidraw.
Without this, as events are not released, soft repeat floods userspace
with unknown key events.
Signed-off-by: Philippe Valembois <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
Declare an entry point that can use fmod_ret BPF programs, and
also an API to access and change the incoming data.
A simpler implementation would consist in just calling
hid_bpf_device_event() for any incoming event and let users deal
with the fact that they will be called for any event of any device.
The goal of HID-BPF is to partially replace drivers, so this situation
can be problematic because we might have programs which will step on
each other toes.
For that, we add a new API hid_bpf_attach_prog() that can be called
from a syscall and we manually deal with a jump table in hid-bpf.
Whenever we add a program to the jump table (in other words, when we
attach a program to a HID device), we keep the number of time we added
this program in the jump table so we can release it whenever there are
no other users.
HID devices have an RCU protected list of available programs in the
jump table, and those programs are called one after the other thanks
to bpf_tail_call().
To achieve the detection of users losing their fds on the programs we
attached, we add 2 tracing facilities on bpf_prog_release() (for when
a fd is closed) and bpf_free_inode() (for when a pinned program gets
unpinned).
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
The Topre REALFORCE R2 firmware incorrectly reports that interface
descriptor number 1, input report descriptor 2's events are array events
rather than variable events. That particular report descriptor is used
to report keypresses when there are more than 6 keys held at a time.
This bug prevents events from this interface from being registered
properly, so only 6 keypresses (from a different interface) can be
registered at once, rather than full n-key rollover.
This commit fixes the bug by setting the correct value in a report_fixup
function.
The original bug report can be found here:
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/804
Thanks to Benjamin Tissoires for diagnosing the issue with the report
descriptor.
Signed-off-by: Harry Stern <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
The UGEE v2 tablets expose a string descriptor with their capabilities.
Move the code used to parse the descriptors and generate a parameter
list from it to its own function and add KUnit tests to validate the
parser.
Tested-by: Jouke Witteveen <[email protected]>
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
The uclogic_rdesc_template_apply() function is used by the driver to
generate HID descriptors from templates.
In order to avoid regressions in future patches, add KUnit tests to
test the function.
To run the tests:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/hid \
--kconfig_add CONFIG_VIRTIO_UML=y \
--kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Pull HID updates from Jiri Kosina:
- support for pens with 3 buttons with Wacom driver (Joshua Dickens)
- support for HID_DG_SCANTIME to report the timestamp for pen and touch
events in Wacom driver (Joshua Dickens)
- support for sensor discovery in amd-sfh driver (Basavaraj Natikar)
- support for wider variety of Huion tablets ported from DIGImend
project (José Expósito, Nikolai Kondrashov)
- new device IDs and other assorted small code cleanups
* tag 'for-linus-2022052401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (44 commits)
HID: apple: Properly handle function keys on Keychron keyboards
HID: uclogic: Switch to Digitizer usage for styluses
HID: uclogic: Add pen support for XP-PEN Star 06
HID: uclogic: Differentiate touch ring and touch strip
HID: uclogic: Always shift touch reports to zero
HID: uclogic: Do not focus on touch ring only
HID: uclogic: Return raw parameters from v2 pen init
HID: uclogic: Move param printing to a function
HID: core: Display "SENSOR HUB" for sensor hub bus string in hid_info
HID: amd_sfh: Move bus declaration outside of amd-sfh
HID: amd_sfh: Add physical location to HID device
HID: amd_sfh: Modify the hid name
HID: amd_sfh: Modify the bus name
HID: amd_sfh: Add sensor name by index for debug info
HID: amd_sfh: Add support for sensor discovery
HID: bigben: fix slab-out-of-bounds Write in bigben_probe
Hid: wacom: Fix kernel test robot warning
HID: uclogic: Disable pen usage for Huion keyboard interfaces
HID: uclogic: Support disabling pen usage
HID: uclogic: Pass keyboard reports as is
...
This patch adds support for one of the several Mega World USB game
controller with integrated force feedback. It is a HID based
memory-less game controller, with a weak motor on the left, and a
strong one on the right.
Signed-off-by: frank zago <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Pull input updates from Dmitry Torokhov:
- a revert of a patch resetting extra buttons on touchpads claiming to
be buttonpads as this caused regression on certain Dell devices
- a new driver for Mediatek MT6779 keypad
- a new driver for Imagis touchscreen
- rework of Google/Chrome OS "Vivaldi" keyboard handling
- assorted driver fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (31 commits)
Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
Input: adi - remove redundant variable z
Input: add Imagis touchscreen driver
dt-bindings: input/touchscreen: bindings for Imagis
Input: synaptics - enable InterTouch on ThinkPad T14/P14s Gen 1 AMD
Input: stmfts - fix reference leak in stmfts_input_open
Input: add bounds checking to input_set_capability()
Input: iqs5xx - use local input_dev pointer
HID: google: modify HID device groups of eel
HID: google: Add support for vivaldi to hid-hammer
HID: google: extract Vivaldi hid feature mapping for use in hid-hammer
Input: extract ChromeOS vivaldi physmap show function
HID: google: switch to devm when registering keyboard backlight LED
Input: mt6779-keypad - fix signedness bug
Input: mt6779-keypad - add MediaTek keypad driver
dt-bindings: input: Add bindings for Mediatek matrix keypad
Input: da9063 - use devm_delayed_work_autocancel()
Input: goodix - fix race on driver unbind
Input: goodix - use input_copy_abs() helper
Input: add input_copy_abs() function
...
We need to support parsing the HID device in both the Vivaldi and the
Hammer drivers so that we can properly expose the function row physmap
to userspace when a hammer device uses a vivaldi keyboard layout for the
function row keys. Extract the feature mapping logic from the vivaldi
driver into an hid specific vivaldi library so we can use it from both
HID drivers.
To allow more code sharing we mandate that vivaldi data must be placed
at the very beginning of the driver data attached to the HID device
instance.
Signed-off-by: Stephen Boyd <[email protected]>
Tested-by: Stephen Boyd <[email protected]> # coachz, wormdingler
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Add a driver to enable the macro keys (M1 - M5) by default, these are
mapped to XF86Tools and XF86Launch5 - XF86Launch8. The driver remaps
them by default to macro keys with an option to retain the old mapping
which users most likely already use as there are many scripts to enable
the macro keys available on Github and other websites.
Signed-off-by: Jelle van der Waa <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Fix for SiGma Micro-based keyboards where all the modifier keys mapped
to Shift_L.
Co-developed-by: Kinglong Mee <[email protected]>
Signed-off-by: Kinglong Mee <[email protected]>
Signed-off-by: Desmond Lim <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Add a new driver for the LetSketch / VSON WP9620N drawing tablet. This
drawing tablet is also sold under other brand names such as Case U,
presumably this driver will work for all of them. But it has only been
tested with a LetSketch WP9620N model.
These tablets also work without a special HID driver, but then only
part of the active area works and both the pad and stylus buttons are
hardwired to special key-combos. E.g. the 2 stylus buttons send right
mouse clicks / resp. "e" key presses.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2005575
BugLink: https://github.com/DIGImend/digimend-kernel-drivers/issues/528
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Jiri Kosina