mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git
synced 2026-10-31 06:14:39 +01:00
dev
1794
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Zhenghui Hao
|
289e99e7a2 |
parisc: parse early parameters in setup_arch()
parisc is one of the few architectures that does not call parse_early_param() from setup_arch(). That was mostly harmless until commit |
||
|
Sean Young
|
4485a01f4d |
parisc: unwind: Replace open-coded binary search with bsearch()
There is a bug in the binary search where hi can underflow. If addr is less than the first entry, then "hi = mid - 1" will underflow to ULONG_MAX. Then we have an out-of-bounds read. Replace the open-coded binary search with bsearch(). Issue found by an LLM. Signed-off-by: Sean Young <[email protected]> Signed-off-by: Helge Deller <[email protected]> |
||
|
Linus Torvalds
|
b6b019a1d9 |
Merge tag 'parisc-for-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller: - Drop PER_HPUX personality from UAPI headers - Infinite loop fix when parsing IRQ value in eisa code - Switch to use asm-generic/serial.h - Prevent possible unaligned asm code in head.S * tag 'parisc-for-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: eisa: Fix infinite loop when parsing invalid IRQ value parisc: Fix alignment of asm statements in head.S parisc: eisa_eeprom: Add missing MODULE_DESCRIPTION() parisc: Use asm-generic/serial.h parisc: sba_iommu: Remove dead DEBUG_DMB_TRAP code UAPI: Drop PER_HPUX personality parisc: superio: Spelling s/Peterson/Petersen/ |
||
|
Linus Torvalds
|
ed3b875bea |
Merge tag 'mm-stable-2026-08-18-18-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm: drop "sub" prefix from various places" (Dev Jain)
page->folio conversion and a naming cleanup
- "mm/kasan: remove redundant initialization for kasan_flag_write_only"
(Igor Putko)
KASAN cleanup work
- "mm/filemap: reduce unnecessary xarray lookups" (Chi Zhiling)
Small speedup in the pagecaache read code
- "mm/percpu: Fix possible NOFS/NOIO reclaim recursion" (Kaitao Cheng)
Improve the vmalloc code - mainly the avoidance of GFP_KERNEL
allocations when the caller asked for GFP_NOFS or GFP_NOIO
- "mm/kmemleak: avoid soft lockup when scanning task stacks" (Breno
Leitao)
Avoid a soft lockup watchdog trigger from the kmemleak scanning code
in extreme situations
- "mm/page_owner: misc cleanups" (Ye Liu)
Cleanups to the page_owner code. For some reason lots of people have
been working on the page_owner code this cycle.
- "mm: convert to walk_page_range_vma() to eliminate find_vma()"
(Kefeng Wang)
Simplify and accelerate the page walking library function
- "mm/migrate: preparatory cleanups for batch copy and offload"
(Shivank Garg)
Cleanups in the migration code
- "mm/page_owner: add per-fd filter infrastructure for print_mode and
NUMA filtering" (Zhen Ni)
Per-fd filtering to page_owner in order to reduce the sometimes vast
amount of output it can produce
- "mm: Refactor bootmem gigantic hugepage allocation" (Muchun Song)
Fixes and preparatory cleanups around bootmem HugeTLB handling,
sparse initialization ordering, and related vmemmap setup
- "mm/zsmalloc: reduce lock contention in zs_free()" (Wenchao Hao)
Reduce lock contention in zs_free(), which dominates the unmap path
under memory pressure on Android (LMK kills) and on x86 servers
running zswap-heavy workloads.
Up to 1.83x improvement in microbenchmarking.
- "move alloc_tag.c file under mm/" (Suren Baghdasaryan)
- "samples/damon: handle damon_{start,stop}() failures" (SJ Park)
Fix improper handling of damon_start(), damon_stop(), and
damon_call() failures across DAMON sample modules to prevent
potential memory leaks, operation disruptions and use-after-free
bugs
- "mm/damon/sysfs: kobject_del() directories that users can
create/remove" (SJ Park)
Fix delayed sysfs directory removal under DEBUG_KOBJECT_RELEASE
causeing creation failures due to duplicate directory names by adding
missing kobject_del() calls before creating new directories
- "mm: cleanup clear_not_present_full_ptes()" (David Hildenbrand)
Clean up the core pte handling code
- "selftests/damon: misc fixes for test bugs" (Kunwu Chan)
Fix several bugs in the DAMON selftests
- "selftests/damon: fix memcg_path staging handling" (Cheng Nie)
Fix a bug in _damon_sysfs.py for damos_filter memcg_path setup, and
add a test case for it in sysfs.py.
- "selftests/damon: test kdamond refresh_ms" (Ruslan Valiyev)
Selftest coverage for DAMON's refresh_ms sysfs feature by updating
the test control module and verifying that scheme stats update
automatically without manual intervention
- "mm/damon: five misc fixups" (Akinobu Mita)
Miscellaneous DAMON fixups.
- "mm/damon/core: detect internal variation above max_nr_regions/2"
(Jiayuan Chen)
Fix DAMON's region splitting behavior when region counts exceed half
the maximum budget by dynamically scaling down the split fraction as
the limit approaches, preventing large regions from staying un-split,
and add corresponding KUnit test coverage
- "mm: preparatory patches for PMD level swap entries" (Usama Arif)
Refactor and clean up PMD softleaf helpers, call sites, and
architecture flags to lay the groundwork for a follow-up series that
introduces PMD page table swap entries
- "mm/damon: update, optimize, and clean up doc, tests, and code" (SJ
Park)
Update DAMON design and ABI documentation, expands unit and selftest
coverage, optimize damon_commit_target_regions(), and clean up
recently added sysfs interface code for better readability
- "mm/vmpressure: reduce CPU, memory and code overhead on cgroup v2"
(Usama Arif)
Optimize vmpressure() by skipping unnecessary work on cgroup v2 for
userspace event notifications and refactor v1-only eventfd handling
into mm/memcontrol-v1.c to reduce memory overhead and code complexity
- "selftests/mm: refactor pkey helpers and fix mmap error handling"
(Hongfu Li)
Refactor pkeys shared tracing and assertion helpers into a common
file, unify protection key selftests to use consistent diagnostic
logging and assertions, and enforce standardized MAP_FAILED return
checks for mmap() calls across the tests
- "mm/damon: optimize out nr_accesses_bp" (SJ Park)
Replace the error-prone, continuously updated nr_accesses_bp field in
damon_region with an on-demand moving sum function, reducing
structure memory overhead and avoiding state corruption bugs
- "Open HugeTLB allocation routine for more generic use" (Ackerley Tng)
Decouple HugeTLB folio allocation from VMA dependencies by
introducing hugetlb_alloc_folio(), enabling subsystems like
guest_memfd to allocate HugeTLB folios without standard VMA
reservations or pseudo-VMAs
- "mm/damon: provide pseudo moving sum probe_hits" (SJ Park)
Integrate DAMON's probe_hits attribute counter into the pseudo moving
sum infrastructure, enabling real-time, online monitoring without
waiting for full aggregation intervals
- "mm: Some cleanups for page allocator APIs" (Brendan Jackman)
Simplify and refactor the page allocator entry points and flags by
unifying allocation paths, adding internal alloc_flags arguments, and
eliminating redundant __ prefixed alloc_pages variants.
- "Fix incorrect access of hugetlb pte entries" (Dev Jain)
Enforce the consistent use of huge_ptep_get() instead of ptep_get()
for HugeTLB entries and fixes an unaligned address issue in arm64's
huge_ptep_get() implementation
- "mm/damon: validate all parameters in the core" (SJ Park)
Consolidate parameter validation into the DAMON core specifically
within damon_start() and damon_commit_ctx() to centralize error
checking, eliminate caller-side redundant checks and to improve
maintenance efficiency
- "tools/mm/page_owner_sort: fix filtering and cleanup issues" (Yichong
Chen)
Rename is_need() to filter_record() for clearer return semantics, fix
per-record allocation memory leaks and bound output copies in
search_pattern() to address an existing buffer issue
- "memcg: bail out reclaim when memcg is dying" (Jiayuan Chen)
Mitigate a system-wide stall which occurs when a cgroup is removed
while one of its memory control files is doing synchronous reclaim
- "mm/memory-failure: add panic option for unrecoverable pages" (Breno
Leitao)
Introduce an opt-in vm.panic_on_unrecoverable_memory_failure sysctl
that immediately panics the kernel on unrecoverable memory errors in
kernel-owned pages to preserve error context and prevent delayed,
silent data corruption
- "mm/damon: refactor damon_{start,stop,commit}() for simple error
handling" (SJ Park)
Refactor the DAMON core API functions to guarantee that all contexts
are fully stopped when damon_start(), damon_stop(), or damon_commit()
fail, eliminating the need for complex and error-prone caller-side
cleanup code
- "Keep tail page private zero at free and folio split" (Zi Yan)
Add checks to ensure tail_page->private is zero when freeing compound
or high-order pages and when promoting tail pages during large folio
splits. By validating these fields at free and split time, it allows
the removal of redundant private field clearing inside
prep_compound_tail()
- "mm: drop redundant lru_add_drain in anon folio reuse paths" (Barry
Song)
Eliminate redundant lru_add_drain() calls in
wp_can_reuse_anon_folio() and do_swap_page() to reduce LRU lock
contention and system overhead
By validating folio refcounts against the LRU cache before draining
and removing unnecessary drains in the swap path, it achieves up to a
30.5% reduction in drain calls during heavy swap workloads
- "mm: clean up folio LRU and swap declarations" (Jianyue Wu)
Reorganize folio LRU and swap code by relocating page-cluster state
to mm/swap_state.c, renaming mm/swap.c to mm/folio.c, and moving
MM-internal reclaim declarations into mm/internal.h.
- "userfaultfd: working set tracking for VM guest memory" (Kiryl
Shutsemau)
Add userfaultfd support for tracking the working set of VM guest
memory, so a VMM can identify hot pages and reclaim cold ones to
tiered or remote storage
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 2)" (David
Hildenbrand)
Remove the remaining pieces of CONFIG_HAVE_BOOTMEM_INFO_NODE,
performing some smaller cleanups around freeing of reserved vmemmap
pages on the way.
- "mm/damon: update probe hits for runtime parameter commits" (SJ Park)
Ensure that DAMON's probe_hits attribute counter is properly updated
when monitoring intervals are changed at runtime, matching the
behavior of nr_accesses. To achieve this, it refactors and renames
existing helper functions for shared use, applies the updates to
probe_hits, and handles edge cases in damon_probe_hits_mvsum() to
maintain measurement accuracy.
- "KSM: performance optimizations for rmap_walk_ksm" (xu xin)
Resolve a severe KSM reverse-mapping performance bottleneck where
thousands of split VMAs sharing a single anon_vma cause extended lock
contention.
By adding an interval-filtering check during the rmap walk, it
reduces worst-case anon_vma lock hold times from over 500ms down to
under 2ms, preventing application freezes and latency spikes under
memory pressure.
- "mm: split a couple of headers from internal.h" (Mike Rapoport)
Split declarations related to mm_init, memblock, vmalloc and sparse
into new headers
- "KSM: use linear_page_index in collect_procs_ksm()" (xu xin)
Apply the interval tree optimization from rmap_walk_ksm() to
collect_procs_ksm() to avoid iterating over non-matching VMAs during
KSM memory error handling.
It hoists loop-invariant address initialization and restricts the
anon_vma_interval_tree_foreach walk to a targeted page offset range,
reducing redundant checks and improving lookup efficiency.
- "selftests/mm: avoid false failures in hugetlb and KSM tests" (Sayali
Patil)
Fix issues in the hugetlb and KSM MM selftest categories that can
report failures when the prerequisites for the tests are not
satisfied
- "mm/damon: introduce data attributes only monitoring" (SJ Park)
Introduce attribute-weighted region management in DAMON, allowing
users to prioritize specific data attributes (such as page sizes or
cgroups) over or instead of access monitoring.
By assigning weights to attribute probes, DAMON can completely
disable access tracking and adjust monitoring regions based on
weighted probe-hit counters to optimize monitoring quality for
attribute-focused workloads.
- "mm/hmm: Add mmap lock-drop support for userfaultfd-backed mappings"
(Stanislav Kinsburskii)
Extend hmm_range_fault() to support userfaultfd-backed regions by
allowing the mmap lock to be dropped during fault handling via a new
hmm_range_fault_locked() helper.
By accepting a locked pointer and signaling retry status when lock
release occurs, it enables page fault resolution in userfaultfd
regions while preserving backward compatibility for existing callers.
- "mm: make VMA page offset handling more consistent" (Lorenzo Stoakes)
Clean up and standardize how vma->vm_pgoff is accessed and
manipulated across file-backed and anonymous mappings in the kernel
It introduces dedicated helper functions such as vma_start_pgoff(),
vma_end_pgoff(), vma_set_pgoff() and linear_page_delta() while
renaming rmap interval tree helpers to better reflect their
functionality.
These changes establish a cleaner foundation for future work that
will unify virtual page offset indexing for all anonymous and CoW'd
folios.
- "mm: handle device-private PMDs in walk callbacks" (Usama Arif)
Address kernel panics and state corruption caused by MM walk
callbacks reaching non-present device-private PMD swap entries
created during HMM migrations
It ensures that functions which acquire pmd_trans_huge_lock()
properly recognize device-private PMDs instead of assuming a present
THP or a standard migration entry.
- "mm/rmap: Refactor try_to_unmap_one" (Dev Jain)
Refactor try_to_unmap_one by modularizing Hugetlb,
anonymous-lazyfree, and anonymous-swapbacked logic into dedicated
functions, laying the structural groundwork for batched anonymous
large folio unmapping.
- "Docs/ABI/damon: sysfs ABI document fixes and additions" (Song Hu)
Fix typos and fills in missing entries in the DAMON sysfs ABI
document
- "dax/kmem: atomic whole-device hotplug via sysfs" (Gregory Price)
Introduce an atomic sysfs state attribute and supporting DAX/MM
infrastructure to prevent userland races when offlining and removing
entire memory regions
By adding an unplugged state alongside standard online modes, it
enables whole-device atomic hotplug control while preserving backward
compatibility.
- "mm: convert more vm_flags_t users to vma_flags_t" (Lorenzo Stoakes)
Continue transitioning the kernel from the deprecated vm_flags_t type
to vma_flags_t across core memory management infrastructure.
It replaces legacy type usage in core functions such as do_mmap(),
unmapped area allocation, mm->def_vma_flags, and VMA operations like
mlock, mprotect, and mremap.
- "Two small patches to clean up mm/mm_slot.h" (xu xin)
Refactor mm_slot.h by introducing mm_slot_remove() to unify duplicate
slot deletion sequences in khugepaged and KSM. It also adds code
documentation explaining why mm_slot_lookup and mm_slot_insert must
remain as preprocessor macros rather than static inline functions.
- "mm/damon/core: hide core-private struct fields" (SJ Park)
Clean up DAMON core structures by consistently marking internal-only
fields with private: comment tags to prevent improper direct access
from outer layers.
It enforces encapsulation across core structures including
damon_region, damon_target, and damon_ctx and updates DAMON_SYSFS to
interact through approved access APIs instead of exposing raw struct
members.
- "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races"
(SJ Park)
Address potential infinite loops, NULL dereferences, and race
conditions identified in DAMON
It fixes an infinite loop triggered by extreme user configurations, a
NULL pointer dereference within unit tests and minor monitoring
accuracy degradation caused by subtle runtime races.
- "mm/page_alloc: fixes for free_pages_nolock() on RT/UP" (Brendan
Jackman)
Fix an NMI safety flaw in __free_frozen_pages() where freeing pages
on non-SMP or PREEMPT_RT kernels can bypass can_spin_trylock() checks
via non-PCP or isolated migration paths.
It also resolves potential kernel crashes and privilege escalation
risks triggered when BPF tracing runs in NMI context alongside memory
hotplug or large allocation frees.
- "mm/page_alloc: couple of followups for recent cleanups" (Brendan
Jackman)
Clean up and update page allocator nomenclature, documentation, and
debug assertions.
It aligns internal FPI_ flags with the public "nolock" naming
convention, removes outdated internal implementation details from
high-level page allocator comments, and eliminates obsolete
VM_BUG_ON() assertions in allocation paths.
- "mm/mseal: further cleanups" (Lorenzo Stoakes)
Refactor and simplify the mseal implementation by clarifying API
boundaries and removing unnecessary code complexity.
It replaces generic do_mseal() usage outside the syscall with a
dedicated mseal_mmap_page_zero() helper for MMAP_PAGE_ZERO,
eliminates mm_struct parameters to enforce that sealing applies only
to current->mm, and streamlines overall logic and comments with no
functional changes intended.
- "mm/vmscan: fix swappiness=max and clean up per-node proactive
reclaim" (Ridong Chen)
Resolve reclaim behavior bugs and clean up function parameters across
memory reclaim paths
It fixes swappiness=max in both standard reclaim and MGLRU so
unswappable anonymous memory no longer falls back to evicting page
cache, ensures reclaim_store() returns accurate error codes instead
of collapsing all failures into -EAGAIN, and removes the obsolete
gfp_mask parameter from __node_reclaim().
- "mm: mincore: misc cleanups" (Kefeng Wang)
Clean up and simplifies the mincore code. Most importantly, it
removes the historical special behavior that always reports VM_PFNMAP
pages as non-resident.
- "mm/huge_memory: drop dead split helper variants" (Kiryl Shutsemau)
Two trivial cleanups in the folio split API
- "mm/damon: fix uninitialized DAMOS field and kunit exec expectation
bugs" (SJ Park)
Resolve minor operational and testing bugs in DAMON identified by
Sashiko. It initializes the damos->last_applied field to prevent
occasional efficiency degradation and fixes invalid memory accesses
in DAMON KUnit tests during test failure handling.
- "cleanup for stable_page_flags()" (Jinjiang Tu)
Clean up and refactor stable_page_flags() used by /proc/kpageflags
without altering functionality.
It uses BIT_ULL() to prevent shift-overflow warnings on 64-bit flag
bits, converts folio-specific flag checks to standard folio_test_*()
helpers, and removes redundant CONFIG_PAGE_IDLE_FLAG handling.
- "Batch unmap of uffd-wp file folios" (Dev Jain)
Extend batched folio unmapping support to file folios within
userfaultfd write-protect (uffd-wp) VMAs by adding batching
capabilities to pte_install_uffd_wp_if_needed().
This removes special-case restrictions on uffd-wp VMAs in
try_to_unmap_one(), significantly simplifying the function's control
flow and complexity.
- "mm/early_ioremap: clarify and clean up early_ioremap_reset()"
(Sang-Heon Jeon)
Clarify and clean up the architecture-specific usage of
__late_set_fixmap() and __late_clear_fixmap() after
early_ioremap_reset()
It adds explicit documentation regarding when early_ioremap_reset()
must be called and removes redundant macro definitions and reset
calls in the RISC-V and ARM64 architectures.
- "mm: fix reclaim storms in defrag_mode" (Johannes Weiner)
Address severe performance regressions, swap storms, and spurious
OOMs caused by vm.defrag_mode=1 under high memory pressure in Meta
production
It updates the page allocator slowpath so non-movable allocation
requests actively trigger direct reclaim and direct compaction at
pageblock_order scale, allowing them to claim whole pageblocks rather
than spinning unproductively.
- "zram: lockmap tweaks" (Sebastian Siewior)
Optimize and fix lockdep tracking for zram devices by consolidating
per-entry lockmaps and isolate lock classes across multiple instances
This reduces memory overhead by replacing per-entry lockdep_map
instances with a single map per struct zram, and assigns a dynamic
lock_class_key to each instance to prevent false deadlock reports
when different zram devices are backed by distinct filesystems.
* tag 'mm-stable-2026-08-18-18-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (501 commits)
selftests/mm: thuge-gen: fix test_shmget() for PAGE_SIZE check
selftests/mm: unpoison pages in memory-failure teardown
mm/shmem: downgrade final i_blocks check in shmem_evict_inode() to pr_warn()
mm/khugepaged: replace mutex_lock/mutex_unlock usage with guard macro
mm/zsmalloc: fix release order of locks in zs_page_migrate()
Documentation: zram: remove sections numbering
ksm: stop iterating VMAs when ksm_test_exit returns true
mm: fold userfaultfd_rwp() to false without CONFIG_ARCH_HAS_PTE_PROTNONE
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
zram: use a custom key for each zram object
zram: move lockmap to be per-zram instead per table
selftests/mm: fix gup_longterm EINVAL error message
mm: page_alloc: fix non-movable reclaim storm in defrag_mode
mm: page_alloc: move capture_control to the page allocator
mm: compaction: support non-movable compaction for pageblock requests
mm: page_alloc: __GFP_FS lockdep annotation for direct compaction
hugetlb: evaluate subpool free state while locked
mm/damon: remove trailing semicolons after function definitions
mm/damon/ops-common: prevent migration fallback to non-target nodes
mm/damon: update outdated comment about DAMOS filter handling
...
|
||
|
Linus Torvalds
|
762fffa407 |
Merge tag 'irq-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic interrupt subsystem updates from Thomas Gleixner: - Remove pointless NULL checks of the kstats_irqs field. That's a historical left over and not longer required. - Add Radu Rendec as reviewer. Radu thankfully stepped up to help reviewing the interrupt core and the related drivers code. - The usual small improvements and fixes * tag 'irq-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add Radu Rendec as reviewer for the interrupt subsystem genirq/msi: Move misplaced EXPORT_SYMBOL_GPL for msi_domain_free_irqs_all() parisc: Remove unnecessary NULL check of the kstat_irqs field genirq: Remove unnecessary NULL check of the kstat_irqs field irqdomain: Remove unnedded NULL check in __irq_domain_[de]activate_irq() genirq/manage: Use irqd_get_parent_data() helper in __irq_get_irqchip_state() irqdomain: Plug leak in irq_domain_alloc_irqs_locked() error path |
||
|
Linus Torvalds
|
3424d8c18a |
Merge tag 'core-entry-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic entry code updates from Thomas Gleixner: - Make syscall user dispatching configurable Not all architectures can makes use of syscall user dispatching. Allow them to disable the feature completely. - Consolidate stack randomization for the generic entry code and the architectures using it. Stack randomization on syscall entry was sprinkled throughout the architecture specific low level entry code and in some cases at the wrong points, e.g. before establishing state, which violates the non-instrumentable constraints of that code. Clean this up by integrating stack randomization into the generic entry code helpers so that it is invoked at the earliest possible point right after establishing state and converting all generic entry code using architecture over. - Clean up the syscall number handling in the generic entry code. It works correctly for architectures which have a separate return value storage in pt_regs, but fails to distinguish the case where user space handed in -1 as syscall number from the case where the entry code rejects it by returning -1 to the callers. Aside of that the return value functionality of those interfaces is not really intuitive. Fix this by separating the decision to reject a syscall (user dispatch, ptrace, seccomp ...) from the potential modification of the syscall number through these mechanisms. This solves most of the problems for architectures which do not have a separate return value storage in pt_regs except for the case where a tracepoint has a BPF script or a probe attached which overwrite both the syscall number and the return value. But that's a problem which cannot be solved in the generic code, that only can be addressed by separating the storage model in the affected architectures. * tag 'core-entry-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) entry, treewide: Make syscall_enter_from_user_mode[_work]() indicate syscall execution entry: Make return type of syscall_trace_enter() bool entry: Rework trace_syscall_enter() entry: Rework syscall_audit_enter() syscall_user_dispatch: Introduce ARCH_SUPPORTS_SYSCALL_USER_DISPATCH entry: Fix seccomp bypass after ptrace with TSYNC x86/entry: Simplify the syscall number logic x86/entry: Get rid of the sys_ni_syscall() indirection x86/entry: Make syscall functions static ptrace, treewide: Rename ptrace_report_syscall_entry() to ptrace_report_syscall_permit_entry() seccomp, treewide: Rename and convert __secure_computing() to return boolean entry: Use syscall number instead of rereading it entry: Remove syscall_enter_from_user_mode() x86/syscall: Use [syscall_]enter_from_user_mode_randomize_stack() s390/syscall: Use enter_from_user_mode_randomize_stack() riscv/syscall: Use syscall_enter_from_user_mode_randomize_stack() powerpc/syscall: Use syscall_enter_from_user_mode_randomize_stack() loongarch/syscall: Use syscall_enter_from_user_mode_randomize_stack() entry: Provide [syscall_]enter_from_user_mode_randomize_stack() randomize_kstack: Provide add_random_kstack_offset_irqsoff() ... |
||
|
Helge Deller
|
04cf68c9a7 |
parisc: Fix alignment of asm statements in head.S
All assembler statements need to be 4-byte aligned. Prevent a possible misalignment if someone changes the preceeding string and it's length is then suddenly not a multiple of 4 any longer. Cc: [email protected] Signed-off-by: Helge Deller <[email protected]> |
||
|
Lorenzo Stoakes
|
4b7a90a48b |
mm/rmap: rename vma_interval_tree_*() to mapping_rmap_tree_*()
The family of vma_interval_tree_() functions manipulate the address_space (which, of course, is generally referred to as 'mapping') reverse mapping, but are named the 'VMA' interval tree. VMAs may be mapped by an anon_vma, an address_space, or both. Therefore calling the mapping interval tree a 'VMA' interval tree is rather confusing. This is also inconsistent with the anon_vma_interval_tree_*() functions which explicitly reference the rmap object to which they pertain. Rename the vma_interval_tree_*() functions to mapping_rmap_tree_*() to correct this. We will rename the anon rmap functions similarly in a subsequent patch. No functional change intended. Link: https://lore.kernel.org/[email protected] Signed-off-by: Lorenzo Stoakes <[email protected]> Reviewed-by: Gregory Price <[email protected]> Reviewed-by: Vlastimil Babka (SUSE) <[email protected]> Reviewed-by: Zi Yan <[email protected]> Cc: Ackerley Tng <[email protected]> Cc: David Hildenbrand (Arm) <[email protected]> Cc: Kai Huang <[email protected]> Cc: Marek Szyprowski <[email protected]> Cc: Pedro Falcato <[email protected]> Cc: SJ Park <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Liam R. Howlett (Oracle) <[email protected]> Signed-off-by: Andrew Morton <[email protected]> |
||
|
Lorenzo Stoakes
|
7a67b96af0 |
mm/rmap: parameterise vma_interval_tree_*() by address_space
The file-backed mapping interval tree functions vma_interval_tree_*() accept a raw rb_root_cached pointer to determine the tree in which they are operating. However, in each case, this is always associated with an address_space data type. So simply pass a pointer to that instead to simplify the code, and more clearly differentiate between these operations and those concerning anonymous mappings. While we're here, make the generated interval tree functions static as they do not need to be used externally (any previously existing external users have now been removed). We also rename VMA parameters from 'node' to 'vma' as calling this a node is simply confusing, update the input index types to pgoff_t since they reference page offsets and rename the parameters to pgoff_start and pgoff_last. No functional change intended. Link: https://lore.kernel.org/[email protected] Signed-off-by: Lorenzo Stoakes <[email protected]> Reviewed-by: Pedro Falcato <[email protected]> Reviewed-by: Gregory Price <[email protected]> Reviewed-by: Vlastimil Babka (SUSE) <[email protected]> Reviewed-by: Zi Yan <[email protected]> Cc: Ackerley Tng <[email protected]> Cc: David Hildenbrand (Arm) <[email protected]> Cc: Kai Huang <[email protected]> Cc: Marek Szyprowski <[email protected]> Cc: SJ Park <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Liam R. Howlett (Oracle) <[email protected]> Signed-off-by: Andrew Morton <[email protected]> |
||
|
Christian Brauner
|
79d27fd718 |
arch: hookup fchroot() system call
Wire up the fchroot() system call as number 472 on (nearly) all architectures and sync the mirrored copies of the syscall tables and the asm-generic unistd.h under tools/. Link: https://patch.msgid.link/[email protected] Signed-off-by: Christian Brauner (Amutable) <[email protected]> |
||
|
Thomas Gleixner
|
622f04e974 |
ptrace, treewide: Rename ptrace_report_syscall_entry() to ptrace_report_syscall_permit_entry()
The return value of that function is boolean and tells the caller whether to permit the syscall processing or not. Rename the function so the purpose is clear and make the return type bool. Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Mukesh Kumar Chaurasiya (IBM) <[email protected]> Reviewed-by: Jinjie Ruan <[email protected]> Reviewed-by: Radu Rendec <[email protected]> Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <[email protected]> Acked-by: Oleg Nesterov <[email protected]> Acked-by: Magnus Lindholm <[email protected]> Link: https://patch.msgid.link/[email protected] |
||
|
Jinjie Ruan
|
7ba2ba7471 |
seccomp, treewide: Rename and convert __secure_computing() to return boolean
The return value of __secure_computing() currently uses 0 to indicate that a system call should be allowed, and -1 to indicate that it should be blocked/killed. This 0/-1 pattern is non-intuitive for a security check function and makes the control flow at the call sites less readable. Furthermore, any potential future changes to these return values would require a high-risk, error-prone audit of all its users across different architectures. Sanitize this logic by converting the return type of __secure_computing() to a proper boolean, where 'true' explicitly means 'allow' and 'false' means 'fail/deny'. Update all the two dozen or so call sites across the tree to align with this new boolean semantic. No functional changes are intended, as the callers still return -1 to the lower-level assembly entry code upon seccomp denial. Rename the function to __seccomp_permit_syscall() so that the purpose is entirely clear. [ tglx: Rename the function ] Suggested-by: Thomas Gleixner <[email protected]> Suggested-by: Mark Rutland <[email protected]> Signed-off-by: Jinjie Ruan <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Mukesh Kumar Chaurasiya (IBM) <[email protected]> Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <[email protected]> Acked-by: Oleg Nesterov <[email protected]> Link: https://patch.msgid.link/[email protected] |
||
|
Radu Rendec
|
2c27d9b154 |
parisc: Remove unnecessary NULL check of the kstat_irqs field
The kstat_irqs field of struct irq_desc is used to store a per-cpu count of interrupt events. It is initialized in init_desc(), along with all the other fields in struct irq_desc that need explicit initialization, and therefore it's always available (non-NULL) for any valid interrupt descriptor. On parisc, CONFIG_SPARSE_IRQ is disabled, interrupt descriptors are allocated statically in the irq_desc[] array, and kstat_irqs is initialized implicitly to NULL. The kstat_irqs field is initialized later, for all descriptors, via start_kernel() -> early_irq_init() -> init_desc(). smp_boot_one_cpu() is used only for CPU hotplugging. On a SMP system, the boot CPU initializes the interrupt descriptors as described above, and smp_boot_one_cpu() is called later, for the secondary CPU(s). A previous change made similar changes across the generic interrupt code in kernel/irq/irqdesc.c, and provides a more detailed explanation of why kstat_irqs is guaranteed to be non-NULL. Signed-off-by: Radu Rendec <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://patch.msgid.link/[email protected] |
||
|
Helge Deller
|
e6a650acbd |
parisc: Fix build failure for 32-bit kernel with PA2.0 instruction set
The CONFIG_PA11 option can not be used as a reliable check if we build a 32-bit kernel which needs the 32-bit VDSO. Instead depend on CONFIG_64BIT and CONFIG_COMPAT only. Reported-by: Christoph Biedl <[email protected]> Tested-by: Christoph Biedl <[email protected]> Signed-off-by: Helge Deller <[email protected]> |
||
|
Johan Hovold
|
b8425ceefe |
parisc: drivers: switch to dynamic root device
Driver core expects devices to be dynamically allocated and will, for example, complain loudly if a device that lacks a release function is ever freed. Use root_device_register() to allocate and register the root device instead of open coding using a static device. While at it, drop the redundant additional reference taken at init. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
3dce917902 |
parisc: Allow to build without VDSO32
When building for 64-bit and without CONFIG_COMPAT, leave out the vdso32 binary. Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
35493b28e7 |
parisc: Fix default stack size when COMPAT=n
The CONFIG_STACK_MAX_DEFAULT_SIZE_MB config option does not exist when CONFIG_COMPAT is disabled. Use default 1 GB stack in this case. Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
7dc9ee6e5e |
parisc: Fix signal code to depend on CONFIG_COMPAT instead of CONFIG_64BIT
The signal handler code used CONFIG_64BIT to decide if compat handling code should be compiled in. Fix it to use CONFIG_COMPAT instead. This allows to disable CONFIG_COMPAT even when running a 64-bit kernel. Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
97bfda4520 |
parisc: Avoid compat syscalls when COMPAT=n
Drop unnecessary code and syscall tables when we run a 64-bit kernel with conpat mode disabled. Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
da3680f564 |
parisc: _llseek syscall is only available for 32-bit userspace
Cc: [email protected] Signed-off-by: Helge Deller <[email protected]> |
||
|
Linus Torvalds
|
40286d6379 |
Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
||
|
Linus Torvalds
|
334fbe734e |
Merge tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton: - "maple_tree: Replace big node with maple copy" (Liam Howlett) Mainly prepararatory work for ongoing development but it does reduce stack usage and is an improvement. - "mm, swap: swap table phase III: remove swap_map" (Kairui Song) Offers memory savings by removing the static swap_map. It also yields some CPU savings and implements several cleanups. - "mm: memfd_luo: preserve file seals" (Pratyush Yadav) File seal preservation to LUO's memfd code - "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan Chen) Additional userspace stats reportng to zswap - "arch, mm: consolidate empty_zero_page" (Mike Rapoport) Some cleanups for our handling of ZERO_PAGE() and zero_pfn - "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu Han) A robustness improvement and some cleanups in the kmemleak code - "Improve khugepaged scan logic" (Vernon Yang) Improve khugepaged scan logic and reduce CPU consumption by prioritizing scanning tasks that access memory frequently - "Make KHO Stateless" (Jason Miu) Simplify Kexec Handover by transitioning KHO from an xarray-based metadata tracking system with serialization to a radix tree data structure that can be passed directly to the next kernel - "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas Ballasi and Steven Rostedt) Enhance vmscan's tracepointing - "mm: arch/shstk: Common shadow stack mapping helper and VM_NOHUGEPAGE" (Catalin Marinas) Cleanup for the shadow stack code: remove per-arch code in favour of a generic implementation - "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin) Fix a WARN() which can be emitted the KHO restores a vmalloc area - "mm: Remove stray references to pagevec" (Tal Zussman) Several cleanups, mainly udpating references to "struct pagevec", which became folio_batch three years ago - "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl Shutsemau) Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail pages encode their relationship to the head page - "mm/damon/core: improve DAMOS quota efficiency for core layer filters" (SeongJae Park) Improve two problematic behaviors of DAMOS that makes it less efficient when core layer filters are used - "mm/damon: strictly respect min_nr_regions" (SeongJae Park) Improve DAMON usability by extending the treatment of the min_nr_regions user-settable parameter - "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka) The proper fix for a previously hotfixed SMP=n issue. Code simplifications and cleanups ensued - "mm: cleanups around unmapping / zapping" (David Hildenbrand) A bunch of cleanups around unmapping and zapping. Mostly simplifications, code movements, documentation and renaming of zapping functions - "support batched checking of the young flag for MGLRU" (Baolin Wang) Batched checking of the young flag for MGLRU. It's part cleanups; one benchmark shows large performance benefits for arm64 - "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner) memcg cleanup and robustness improvements - "Allow order zero pages in page reporting" (Yuvraj Sakshith) Enhance free page reporting - it is presently and undesirably order-0 pages when reporting free memory. - "mm: vma flag tweaks" (Lorenzo Stoakes) Cleanup work following from the recent conversion of the VMA flags to a bitmap - "mm/damon: add optional debugging-purpose sanity checks" (SeongJae Park) Add some more developer-facing debug checks into DAMON core - "mm/damon: test and document power-of-2 min_region_sz requirement" (SeongJae Park) An additional DAMON kunit test and makes some adjustments to the addr_unit parameter handling - "mm/damon/core: make passed_sample_intervals comparisons overflow-safe" (SeongJae Park) Fix a hard-to-hit time overflow issue in DAMON core - "mm/damon: improve/fixup/update ratio calculation, test and documentation" (SeongJae Park) A batch of misc/minor improvements and fixups for DAMON - "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David Hildenbrand) Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code movement was required. - "zram: recompression cleanups and tweaks" (Sergey Senozhatsky) A somewhat random mix of fixups, recompression cleanups and improvements in the zram code - "mm/damon: support multiple goal-based quota tuning algorithms" (SeongJae Park) Extend DAMOS quotas goal auto-tuning to support multiple tuning algorithms that users can select - "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao) Fix the khugpaged sysfs handling so we no longer spam the logs with reams of junk when starting/stopping khugepaged - "mm: improve map count checks" (Lorenzo Stoakes) Provide some cleanups and slight fixes in the mremap, mmap and vma code - "mm/damon: support addr_unit on default monitoring targets for modules" (SeongJae Park) Extend the use of DAMON core's addr_unit tunable - "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache) Cleanups to khugepaged and is a base for Nico's planned khugepaged mTHP support - "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand) Code movement and cleanups in the memhotplug and sparsemem code - "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup CONFIG_MIGRATION" (David Hildenbrand) Rationalize some memhotplug Kconfig support - "change young flag check functions to return bool" (Baolin Wang) Cleanups to change all young flag check functions to return bool - "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh Law and SeongJae Park) Fix a few potential DAMON bugs - "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo Stoakes) Convert a lot of the existing use of the legacy vm_flags_t data type to the new vma_flags_t type which replaces it. Mainly in the vma code. - "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes) Expand the mmap_prepare functionality, which is intended to replace the deprecated f_op->mmap hook which has been the source of bugs and security issues for some time. Cleanups, documentation, extension of mmap_prepare into filesystem drivers - "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes) Simplify and clean up zap_huge_pmd(). Additional cleanups around vm_normal_folio_pmd() and the softleaf functionality are performed. * tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm: fix deferred split queue races during migration mm/khugepaged: fix issue with tracking lock mm/huge_memory: add and use has_deposited_pgtable() mm/huge_memory: add and use normal_or_softleaf_folio_pmd() mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio() mm/huge_memory: separate out the folio part of zap_huge_pmd() mm/huge_memory: use mm instead of tlb->mm mm/huge_memory: remove unnecessary sanity checks mm/huge_memory: deduplicate zap deposited table call mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE() mm/huge_memory: add a common exit path to zap_huge_pmd() mm/huge_memory: handle buggy PMD entry in zap_huge_pmd() mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc mm/huge: avoid big else branch in zap_huge_pmd() mm/huge_memory: simplify vma_is_specal_huge() mm: on remap assert that input range within the proposed VMA mm: add mmap_action_map_kernel_pages[_full]() uio: replace deprecated mmap hook with mmap_prepare in uio_info drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare mm: allow handling of stacked mmap_prepare hooks in more drivers ... |
||
|
Linus Torvalds
|
c1fe867b5b |
Merge tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- A rework of the hrtimer subsystem to reduce the overhead for
frequently armed timers, especially the hrtick scheduler timer:
- Better timer locality decision
- Simplification of the evaluation of the first expiry time by
keeping track of the neighbor timers in the RB-tree by providing
a RB-tree variant with neighbor links. That avoids walking the
RB-tree on removal to find the next expiry time, but even more
important allows to quickly evaluate whether a timer which is
rearmed changes the position in the RB-tree with the modified
expiry time or not. If not, the dequeue/enqueue sequence which
both can end up in rebalancing can be completely avoided.
- Deferred reprogramming of the underlying clock event device. This
optimizes for the situation where a hrtimer callback sets the
need resched bit. In that case the code attempts to defer the
re-programming of the clock event device up to the point where
the scheduler has picked the next task and has the next hrtick
timer armed. In case that there is no immediate reschedule or
soft interrupts have to be handled before reaching the reschedule
point in the interrupt entry code the clock event is reprogrammed
in one of those code paths to prevent that the timer becomes
stale.
- Support for clocksource coupled clockevents
The TSC deadline timer is coupled to the TSC. The next event is
programmed in TSC time. Currently this is done by converting the
CLOCK_MONOTONIC based expiry value into a relative timeout,
converting it into TSC ticks, reading the TSC adding the delta
ticks and writing the deadline MSR.
As the timekeeping core has the conversion factors for the TSC
already, the whole back and forth conversion can be completely
avoided. The timekeeping core calculates the reverse conversion
factors from nanoseconds to TSC ticks and utilizes the base
timestamps of TSC and CLOCK_MONOTONIC which are updated once per
tick. This allows a direct conversion into the TSC deadline value
without reading the time and as a bonus keeps the deadline
conversion in sync with the TSC conversion factors, which are
updated by adjtimex() on systems with NTP/PTP enabled.
- Allow inlining of the clocksource read and clockevent write
functions when they are tiny enough, e.g. on x86 RDTSC and WRMSR.
With all those enhancements in place a hrtick enabled scheduler
provides the same performance as without hrtick. But also other
hrtimer users obviously benefit from these optimizations.
- Robustness improvements and cleanups of historical sins in the
hrtimer and timekeeping code.
- Rewrite of the clocksource watchdog.
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design,
which was made in the context of systems far smaller than today, is
based on the assumption that the to be monitored clocksource (TSC)
can be trivially compared against a known to be stable clocksource
(HPET/ACPI-PM timer).
Over the years this rather naive approach turned out to have major
flaws. Long delays between the watchdog invocations can cause wrap
arounds of the reference clocksource. The access to the reference
clocksource degrades on large multi-sockets systems dure to
interconnect congestion. This has been addressed with various
heuristics which degraded the accuracy of the watchdog to the point
that it fails to detect actual TSC problems on older hardware which
exposes slow inter CPU drifts due to firmware manipulating the TSC to
hide SMI time.
The rewrite addresses this by:
- Restricting the validation against the reference clocksource to
the boot CPU which is usually closest to the legacy block which
contains the reference clocksource (HPET/ACPI-PM).
- Do a round robin validation betwen the boot CPU and the other
CPUs based only on the TSC with an algorithm similar to the TSC
synchronization code during CPU hotplug.
- Being more leniant versus remote timeouts
- The usual tiny fixes, cleanups and enhancements all over the place
* tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
alarmtimer: Access timerqueue node under lock in suspend
hrtimer: Fix incorrect #endif comment for BITS_PER_LONG check
posix-timers: Fix stale function name in comment
timers: Get this_cpu once while clearing the idle state
clocksource: Rewrite watchdog code completely
clocksource: Don't use non-continuous clocksources as watchdog
x86/tsc: Handle CLOCK_SOURCE_VALID_FOR_HRES correctly
MIPS: Don't select CLOCKSOURCE_WATCHDOG
parisc: Remove unused clocksource flags
hrtimer: Add a helper to retrieve a hrtimer from its timerqueue node
hrtimer: Remove trailing comma after HRTIMER_MAX_CLOCK_BASES
hrtimer: Mark index and clockid of clock base as const
hrtimer: Drop unnecessary pointer indirection in hrtimer_expire_entry event
hrtimer: Drop spurious space in 'enum hrtimer_base_type'
hrtimer: Don't zero-initialize ret in hrtimer_nanosleep()
hrtimer: Remove hrtimer_get_expires_ns()
timekeeping: Mark offsets array as const
timekeeping/auxclock: Consistently use raw timekeeper for tk_setup_internals()
timer_list: Print offset as signed integer
tracing: Use explicit array size instead of sentinel elements in symbol printing
...
|
||
|
Linus Torvalds
|
ef3da345cc |
Merge tag 'vfs-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- coredump: add tracepoint for coredump events
- fs: hide file and bfile caches behind runtime const machinery
Fixes:
- fix architecture-specific compat_ftruncate64 implementations
- dcache: Limit the minimal number of bucket to two
- fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START
- fs/mbcache: cancel shrink work before destroying the cache
- dcache: permit dynamic_dname()s up to NAME_MAX
Cleanups:
- remove or unexport unused fs_context infrastructure
- trivial ->setattr cleanups
- selftests/filesystems: Assume that TIOCGPTPEER is defined
- writeback: fix kernel-doc function name mismatch for wb_put_many()
- autofs: replace manual symlink buffer allocation in autofs_dir_symlink
- init/initramfs.c: trivial fix: FSM -> Finite-state machine
- fs: remove stale and duplicate forward declarations
- readdir: Introduce dirent_size()
- fs: Replace user_access_{begin/end} by scoped user access
- kernel: acct: fix duplicate word in comment
- fs: write a better comment in step_into() concerning .mnt assignment
- fs: attr: fix comment formatting and spelling issues"
* tag 'vfs-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
dcache: permit dynamic_dname()s up to NAME_MAX
fs: attr: fix comment formatting and spelling issues
fs: hide file and bfile caches behind runtime const machinery
fs: write a better comment in step_into() concerning .mnt assignment
proc: rename proc_notify_change to proc_setattr
proc: rename proc_setattr to proc_nochmod_setattr
affs: rename affs_notify_change to affs_setattr
adfs: rename adfs_notify_change to adfs_setattr
hfs: update comments on hfs_inode_setattr
kernel: acct: fix duplicate word in comment
fs: Replace user_access_{begin/end} by scoped user access
readdir: Introduce dirent_size()
coredump: add tracepoint for coredump events
fs: remove do_sys_truncate
fs: pass on FTRUNCATE_* flags to do_truncate
fs: fix archiecture-specific compat_ftruncate64
fs: remove stale and duplicate forward declarations
init/initramfs.c: trivial fix: FSM -> Finite-state machine
autofs: replace manual symlink buffer allocation in autofs_dir_symlink
fs/mbcache: cancel shrink work before destroying the cache
...
|
||
|
Thomas Gleixner
|
ff1c0c5d07 |
Merge branch 'timers/urgent' into timers/core
to resolve the conflict with urgent fixes. |
||
|
Baolin Wang
|
06c4dfa3ce |
mm: change to return bool for ptep_clear_flush_young()/clear_flush_young_ptes()
The ptep_clear_flush_young() and clear_flush_young_ptes() are used to clear the young flag and flush the TLB, returning whether the young flag was set. Change the return type to bool to make the intention clearer. Link: https://lkml.kernel.org/r/24af5144b96103631594501f77d4525f2475c1be.1774075004.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <[email protected]> Reviewed-by: Ritesh Harjani (IBM) <[email protected]> Reviewed-by: Lorenzo Stoakes (Oracle) <[email protected]> Acked-by: David Hildenbrand (Arm) <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> |
||
|
Ilpo Järvinen
|
9036bd0efc |
PCI: Align head space better
When a bridge window contains big and small resource(s), the small resource(s) may not amount to the half of the size of the big resource which would allow calculate_head_align() to shrink the head alignment. This results in always placing the small resource(s) after the big resource. In general, it would be good to be able to place the small resource(s) before the big resource to achieve better utilization of the address space. In the cases where the large resource can only fit at the end of the window, it is even required. However, carrying the information over from pbus_size_mem() and calculate_head_align() to __pci_assign_resource() and pcibios_align_resource() is not easy with the current data structures. A somewhat hacky way to move the non-aligning tail part to the head is possible within pcibios_align_resource(). The free space between the start of the free space span and the aligned start address can be compared with the non-aligning remainder of the size. If the free space is larger than the remainder, placing the remainder before the start address is possible. This relocation should generally work, because PCI resources consist only power-of-2 atoms. Various arch requirements may still need to override the relocation, so the relocation is only applied selectively in such cases. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205 Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Tested-by: Xifer <[email protected]> Link: https://patch.msgid.link/[email protected] |
||
|
Ilpo Järvinen
|
38ec53e16f |
parisc/PCI: Clean up align handling
Caller of pcibios_align_resource() (__find_resource_space()) already aligns the start address by 'alignment' so aligning is only necessary if align > alignment. Change also to use ALIGN() instead of open-coding. Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Link: https://patch.msgid.link/[email protected] |
||
|
Ilpo Järvinen
|
f699bcc8bc |
resource: Pass full extent of empty space to resource_alignf callback
__find_resource_space() calculates the full extent of empty space but only passes the aligned space to resource_alignf callback. In some situations, the callback may choose take advantage of the free space before the requested alignment. Pass the full extent of the calculated empty space to resource_alignf callback as an additional parameter. Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Tested-by: Xifer <[email protected]> Link: https://patch.msgid.link/[email protected] |
||
|
Christoph Hellwig
|
e43dce8a0b |
fs: fix archiecture-specific compat_ftruncate64
The "small" argument to do_sys_ftruncate indicates if > 32-bit size should be reject, but all the arch-specific compat ftruncate64 implementations get this wrong. Merge do_sys_ftruncate and ksys_ftruncate, replace the integer as boolean small flag with a descriptive one about LFS semantics, and use it correctly in the architecture-specific ftruncate64 implementations. Fixes: |
||
|
Ingo Molnar
|
f6472b1793 |
Merge tag 'v7.0-rc4' into timers/core, to resolve conflict
Resolve conflict between this change in the upstream kernel: |
||
|
Helge Deller
|
2c98a8fbd6 |
parisc: Flush correct cache in cacheflush() syscall
The assembly flush instructions were swapped for I- and D-cache flags:
SYSCALL_DEFINE3(cacheflush, ...)
{
if (cache & DCACHE) {
"fic ...\n"
}
if (cache & ICACHE && error == 0) {
"fdc ...\n"
}
Fix it by using fdc for DCACHE, and fic for ICACHE flushing.
Reported-by: Felix Lechner <[email protected]>
Fixes:
|
||
|
Thomas Gleixner
|
2a14f7c5ee |
parisc: Remove unused clocksource flags
PARISC does not enable the clocksource watchdog, so the VERIFY flags are pointless as they are not evaluated. Remove them from the clocksource. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Helge Deller <[email protected]> Link: https://patch.msgid.link/[email protected] |
||
|
Linus Torvalds
|
6deccafcb4 |
Merge tag 'parisc-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller: "While testing Sasha Levin's 'kallsyms: embed source file:line info in kernel stack traces' patch series, which increases the typical kernel image size, I found some issues with the parisc initial kernel mapping which may prevent the kernel to boot. The three small patches here fix this" * tag 'parisc-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix initial page table creation for boot parisc: Check kernel mapping earlier at bootup parisc: Increase initial mapping to 64 MB with KALLSYMS |
||
|
Helge Deller
|
8475d8fe21 |
parisc: Fix initial page table creation for boot
The KERNEL_INITIAL_ORDER value defines the initial size (usually 32 or 64 MB) of the page table during bootup. Up until now the whole area was initialized with PTE entries, but there was no check if we filled too many entries. Change the code to fill up with so many entries that the "_end" symbol can be reached by the kernel, but not more entries than actually fit into the initial PTE tables. Signed-off-by: Helge Deller <[email protected]> Cc: <[email protected]> # v6.0+ |
||
|
Helge Deller
|
17c144f110 |
parisc: Check kernel mapping earlier at bootup
The check if the initial mapping is sufficient needs to happen much earlier during bootup. Move this test directly to the start_parisc() function and use native PDC iodc functions to print the warning, because panic() and printk() are not functional yet. This fixes boot when enabling various KALLSYSMS options which need much more space. Signed-off-by: Helge Deller <[email protected]> Cc: <[email protected]> # v6.0+ |
||
|
Nathan Chancellor
|
8678591b47 |
kbuild: Split .modinfo out from ELF_DETAILS
Commit |
||
|
Linus Torvalds
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <[email protected]>
|
||
|
Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <[email protected]> |
||
|
Linus Torvalds
|
8ad8d24d96 |
Merge tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller: - Fix device reference leak in error path - Check if system provides a 64-bit free running platform counter - Minor fixes in debug code * tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: lba_pci: Add debug code to show IO and PA ranges parisc: Detect 64-bit free running platform counter parisc: Fix minor printk issues in iosapic debug code parisc: Enhance debug code for PAT firmware parisc: Add PDC PAT call to get free running 64-bit counter parisc: Fix module path output in qemu tables parisc: Export model name for MPE/ix parisc: Prevent interrupts during reboot parisc: Print hardware IDs as 4 digit hex strings parisc: kernel: replace kfree() with put_device() in create_tree_node() |
||
|
Helge Deller
|
62c544bc10 |
parisc: Detect 64-bit free running platform counter
Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
db7e826030 |
parisc: Enhance debug code for PAT firmware
Enhance output when running PAT firmware, which is helpful when developing the QEMU emulator. The added code is behind an ifdef, so no performance overhead for normal kernels. Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
0b3b90a0f9 |
parisc: Add PDC PAT call to get free running 64-bit counter
PDC PAT defines this optional function. Testing on my C8000 workstation and a rp3440 server did not indicate that they provide such counter. Nevertheless, add the function since we should try to use such a counter if it's available. In Qemu it should be simple to add it. Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
5ff7842103 |
parisc: Fix module path output in qemu tables
Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
97cb9150ff |
parisc: Export model name for MPE/ix
Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
35ac5a728c |
parisc: Prevent interrupts during reboot
Signed-off-by: Helge Deller <[email protected]> |
||
|
Helge Deller
|
ba74652c30 |
parisc: Print hardware IDs as 4 digit hex strings
The hardware IDs are 32-bit unsigned integers, so print them as 4-digit hex numbers. Additionally fix some whitespace glitches. Signed-off-by: Helge Deller <[email protected]> |
||
|
Haoxiang Li
|
dcf69599c4 |
parisc: kernel: replace kfree() with put_device() in create_tree_node()
If device_register() fails, put_device() is the correct way to
drop the device reference.
Found by code review.
Fixes:
|
||
|
Thomas Gleixner
|
99d2592023 |
rseq: Implement sys_rseq_slice_yield()
Provide a new syscall which has the only purpose to yield the CPU after the kernel granted a time slice extension. sched_yield() is not suitable for that because it unconditionally schedules, but the end of the time slice extension is not required to schedule when the task was already preempted. This also allows to have a strict check for termination to catch user space invoking random syscalls including sched_yield() from a time slice extension region. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Mathieu Desnoyers <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Link: https://patch.msgid.link/[email protected] |
||
|
Linus Torvalds
|
50471f8b73 |
Merge tag 'parisc-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
"A fix which allows booting on the very old 710 workstations, and two
fixes in the syscall entry/exit path which allow to execute 64-bit
userspace binaries.
Note that although we currently have a 64-bit (static) kernel to allow
more than 4 GB physical RAM, there is no support for 64-bit userspace
for parisc-linux yet, but Dave and Sven are making slowly progress to
port and fix glibc and gcc.
Summary:
- Fix boot on 710 workstation by not reprogramming ASP chip
- Fix 64bit userspace syscalls (64-bit userspace is still being
developed)
- minor code cleanups in asm/bug.h and perf_regs.c"
* tag 'parisc-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Do not reprogram affinitiy on ASP chip
parisc: Drop linux/kernel.h include from asm/bug.h header
parisc: remove unneeded semicolon in perf_regs.c
parisc: entry.S: fix space adjustment on interruption for 64-bit userspace
parisc: entry: set W bit for !compat tasks in syscall_restore_rfi()
parisc: Drop padding fields and layers entries from inventory log
|