Patch series "mm/vma: convert vm_flags_t to vma_flags_t in vma code", v4.
This series converts a lot of the existing use of the legacy vm_flags_t
data type to the new vma_flags_t type which replaces it.
In order to do so it adds a number of additional helpers:
* vma_flags_empty() - Determines whether a vma_flags_t value has no bits
set.
* vma_flags_and() - Performs a bitwise AND between two vma_flags_t values.
* vma_flags_diff_pair() - Determines which flags are not shared between a
pair of VMA flags (typically non-constant values)
* append_vma_flags() - Similar to mk_vma_flags(), but allows a vma_flags_t
value to be specified (typically a constant value) which will be copied
and appended to to create a new vma_flags_t value, with additional flags
specified to append to it.
* vma_flags_same() - Determines if a vma_flags_t value is exactly equal to
a set of VMA flags.
* vma_flags_same_mask() - Determines if a vma_flags_t value is eactly equal
to another vma_flags_t value (typically constant).
* vma_flags_same_pair() - Determines if a pair of vma_flags_t values are
exactly equal to one another (typically both non-constant).
* vma_flags_to_legacy() - Converts a vma_flags_t value to a vm_flags_t
value, used to enable more iterative introduction of the use of
vma_flags_t.
* legacy_to_vma_flags() - Converts a vm_flags_t value to a vma_flags-t
value, for the same purpose.
* vma_flags_test_single_mask() - Tests whether a vma_flags_t value contain
the single flag specified in an input vma_flags_t flag mask, or if that
flag mask is empty, is defined to return false. Useful for
config-predicated VMA flag mask defines.
* vma_test() - Tests whether a VMA's flags contain a specific singular VMA
flag.
* vma_test_any() - Tests whether a VMA's flags contain any of a set of VMA
flags.
* vma_test_any_mask() - Tests whether a VMA's flags contain any of the
flags specified in another, typically constant, vma_flags_t value.
* vma_test_single_mask() - Tests whether a VMA's flags contain the single
flag specified in an input vma_flags_t flag mask, or if that flag mask is
empty, is defined to return false. Useful for config-predicated VMA flag
mask defines.
* vma_clear_flags() - Clears a specific set of VMA flags from a vma_flags_t
value.
* vma_clear_flags_mask() - Clears those flag set in a vma_flags_t value
(typically constant) from a (typically not constant) vma_flags_t value.
The series mostly focuses on the the VMA specific code, especially that
contained in mm/vma.c and mm/vma.h.
It updates both brk() and mmap() logic to utils vma_flags_t values as much
as is practiaclly possible at this point, changing surrounding logic to be
able to do so.
It also updates the vma_modify_xxx() functions where they interact with VMA
flags directly to use vm_flags_t values where possible.
There is extensive testing added in the VMA userland tests to assert that
all of these new VMA flag functions work correctly.
This patch (of 25):
Firstly, add the ability to determine if VMA flags are empty, that is no
flags are set in a vma_flags_t value.
Next, add the ability to obtain the equivalent of the bitwise and of two
vma_flags_t values, via vma_flags_and_mask().
Next, add the ability to obtain the difference between two sets of VMA
flags, that is the equivalent to the exclusive bitwise OR of the two sets
of flags, via vma_flags_diff_pair().
vma_flags_xxx_mask() typically operates on a pointer to a vma_flags_t
value, which is assumed to be an lvalue of some kind (such as a field in a
struct or a stack variable) and an rvalue of some kind (typically a
constant set of VMA flags obtained e.g. via mk_vma_flags() or
equivalent).
However vma_flags_diff_pair() is intended to operate on two lvalues, so
use the _pair() suffix to make this clear.
Finally, update VMA userland tests to add these helpers.
We also port bitmap_xor() and __bitmap_xor() to the tools/ headers and
source to allow the tests to work with vma_flags_diff_pair().
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/53ab55b7da91425775e42c03177498ad6de88ef4.1774034900.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <[email protected]>
Acked-by: Vlastimil Babka (SUSE) <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Alexandre Ghiti <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: "Borislav Petkov (AMD)" <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chengming Zhou <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Johannes Berg <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Liam Howlett <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Ondrej Mosnacek <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Moore <[email protected]>
Cc: Pedro Falcato <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stephen Smalley <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: WANG Xuerui <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: xu xin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
In tools/ directory, function bitmap_clear() is currently only used in
object file tools/testing/radix-tree/xarray.o.
But instead of keeping a bitmap.c with only bitmap_clear() definition in
radix-tree's own directory, it would be more proper to put it in common
directory lib/.
Sync the kernel definition and link some related libs, no functional
change is expected.
Signed-off-by: Wei Yang <[email protected]>
CC: Matthew Wilcox <[email protected]>
CC: Yury Norov <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
The number of times yet another open coded
`BITS_TO_LONGS(nbits) * sizeof(long)` can be spotted is huge.
Some generic helper is long overdue.
Add one, bitmap_size(), but with one detail.
BITS_TO_LONGS() uses DIV_ROUND_UP(). The latter works well when both
divident and divisor are compile-time constants or when the divisor
is not a pow-of-2. When it is however, the compilers sometimes tend
to generate suboptimal code (GCC 13):
48 83 c0 3f add $0x3f,%rax
48 c1 e8 06 shr $0x6,%rax
48 8d 14 c5 00 00 00 00 lea 0x0(,%rax,8),%rdx
%BITS_PER_LONG is always a pow-2 (either 32 or 64), but GCC still does
full division of `nbits + 63` by it and then multiplication by 8.
Instead of BITS_TO_LONGS(), use ALIGN() and then divide by 8. GCC:
8d 50 3f lea 0x3f(%rax),%edx
c1 ea 03 shr $0x3,%edx
81 e2 f8 ff ff 1f and $0x1ffffff8,%edx
Now it shifts `nbits + 63` by 3 positions (IOW performs fast division
by 8) and then masks bits[2:0]. bloat-o-meter:
add/remove: 0/0 grow/shrink: 20/133 up/down: 156/-773 (-617)
Clang does it better and generates the same code before/after starting
from -O1, except that with the ALIGN() approach it uses %edx and thus
still saves some bytes:
add/remove: 0/0 grow/shrink: 9/133 up/down: 18/-538 (-520)
Note that we can't expand DIV_ROUND_UP() by adding a check and using
this approach there, as it's used in array declarations where
expressions are not allowed.
Add this helper to tools/ as well.
Reviewed-by: Przemek Kitszel <[email protected]>
Acked-by: Yury Norov <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Currently, tools have *ALIGN*() macros scattered across the unrelated
headers, as there are only 3 of them and they were added separately
each time on an as-needed basis.
Anyway, let's make it more consistent with the kernel headers and allow
using those macros outside of the mentioned headers. Create
<linux/align.h> inside the tools/ folder and include it where needed.
Signed-off-by: Yury Norov <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Drop tools' non-atomic test_and_set_bit() and test_and_clear_bit() helpers
now that all users are gone. The names will be claimed in the future for
atomic versions.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Pull bitmap updates from Yury Norov:
- fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo)
- optimize out non-atomic bitops on compile-time constants (Alexander
Lobakin)
- cleanup bitmap-related headers (Yury Norov)
- x86/olpc: fix 'logical not is only applied to the left hand side'
(Alexander Lobakin)
- lib/nodemask: inline wrappers around bitmap (Yury Norov)
* tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits)
lib/nodemask: inline next_node_in() and node_random()
powerpc: drop dependency on <asm/machdep.h> in archrandom.h
x86/olpc: fix 'logical not is only applied to the left hand side'
lib/cpumask: move some one-line wrappers to header file
headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure
headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>
headers/deps: mm: Optimize <linux/gfp.h> header dependencies
lib/cpumask: move trivial wrappers around find_bit to the header
lib/cpumask: change return types to unsigned where appropriate
cpumask: change return types to bool where appropriate
lib/bitmap: change type of bitmap_weight to unsigned long
lib/bitmap: change return types to bool where appropriate
arm: align find_bit declarations with generic kernel
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
lib/test_bitmap: test the tail after bitmap_to_arr64()
lib/bitmap: fix off-by-one in bitmap_to_arr64()
lib: test_bitmap: add compile-time optimization/evaluations assertions
bitmap: don't assume compiler evaluates small mem*() builtins calls
net/ice: fix initializing the bitmap in the switch code
bitops: let optimize out non-atomic bitops on compile-time constants
...
bitmap_weight() doesn't return negative values, so change it's type
to unsigned long. It may help compiler to generate better code and
catch bugs.
Signed-off-by: Yury Norov <[email protected]>
Both nodemask and bitmap routines had mixed return values that provided
potentially signed return values that could never happen. This was
leading to the compiler getting confusing about the range of possible
return values (it was thinking things could be negative where they could
not be). In preparation for fixing nodemask, fix all the bitmap routines
that should be returning unsigned (or bool) values.
Cc: Yury Norov <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Christophe de Dinechin <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Zhen Lei <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
Remove tools/include/asm-generic/bitops/find.h and copy
include/linux/bitmap.h to tools. find_*_le() functions are not copied
because not needed in tools.
Signed-off-by: Yury Norov <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
xa_store() differs from radix_tree_insert() in that it will overwrite an
existing element in the array rather than returning an error. This is
the behaviour which most users want, and those that want more complex
behaviour generally want to use the xas family of routines anyway.
For memory allocation, xa_store() will first attempt to request memory
from the slab allocator; if memory is not immediately available, it will
drop the xa_lock and allocate memory, keeping a pointer in the xa_state.
It does not use the per-CPU cache, although those will continue to exist
until all radix tree users are converted to the xarray.
This patch also includes xa_erase() and __xa_erase() for a streamlined
way to store NULL. Since there is no need to allocate memory in order
to store a NULL in the XArray, we do not need to trouble the user with
deciding what memory allocation flags to use.
Signed-off-by: Matthew Wilcox <[email protected]>
We have test_and_set_bit but not test_and_clear_bit. Add it.
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Adding MEM_TOPOLOGY feature to perf data file,
that will carry physical memory map and its
node assignments.
The format of data in MEM_TOPOLOGY is as follows:
0 - version | for future changes
8 - block_size_bytes | /sys/devices/system/memory/block_size_bytes
16 - count | number of nodes
For each node we store map of physical indexes for
each node:
32 - node id | node index
40 - size | size of bitmap
48 - bitmap | bitmap of memory indexes that belongs to node
| /sys/devices/system/node/node<NODE>/memory<INDEX>
The MEM_TOPOLOGY could be displayed with following
report command:
$ perf report --header-only -I
...
# memory nodes (nr 1, block size 0x8000000):
# 0 [7G]: 0-23,32-69
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Rename 'index' to 'idx', as this breaks the build in rhel5, 6 and other systems where this is used by glibc headers ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
By adding __set_bit and __clear_bit to the tools include directory, we
can share the bitops code. This reveals an include loop between kernel.h,
log2.h, bitmap.h and bitops.h. Break it the same way as the kernel does;
by moving the kernel.h include from bitops.h to bitmap.h.
Signed-off-by: Matthew Wilcox <[email protected]>
Lorenzo Stoakes (Oracle)