On system suspend / resume we always power up the DSP and boot the
firmware, which is not strictly needed as right after the firmware booted
up we power the DSP down again on suspend and we also power it down after
resume after some inactivity.
Out of caution, add a new platform descriptor flag to enable on-demand
DSP boot since this might not work without changes to platform code on
certain platforms.
With the on-demand dsp boot enabled we will not boot the DSP and firmware
up on system or rpm resume, just enable audio subsystem since audio IPs,
like HDA and SoundWire might be needed (codecs suspend/resume operation).
Only boot up the DSP during the first hw_params() call when the DSP is
really going to be needed.
In this way we can handle the audio related use cases:
normal audio use (rpm suspend/resume)
system suspend/resume without active audio
system suspend/resume with active audio
system suspend/resume without active audio, and audio start before the rpm
suspend timeout
Add module option to force the on-demand DSP boot to allow it to be
disabled or enabled without kernel change for testing.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Liam Girdwood <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
An new interface, sof_dai_get_tdm_slots(), is added for machine driver
to get tdm slot number from topology. The dai_get_param() callback
needs to support new parameter type SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS
by returning the tdm slot number of specific SSP port.
Reviewed-by: Bard Liao <[email protected]>
Signed-off-by: Brent Lu <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
ASoC: Updates for v6.10
This is a very big update, in large part due to extensive work the Intel
people have been doing in their drivers though it's also been busy
elsewhere. There's also a big overhaul of the DAPM documentation from
Luca Ceresoli arising from the work he did putting together his recent
ELC talk, and he also contributed a new tool for visualising the DAPM
state.
- A new tool dapm-graph for visualising the DAPM state.
- Substantial fixes and clarifications for the DAPM documentation.
- Very large updates throughout the Intel audio drivers.
- Cleanups of accessors for driver data, module labelling, and for
constification.
- Modernsation and cleanup work in the Mediatek drivers.
- Several fixes and features for the DaVinci I2S driver.
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240.
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Reviewed-by: Cezary Rojewski <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
The core code does not modify the 'struct snd_sof_dsp_ops', stored in
'struct sof_dev_desc'. Make the pointer to 'struct snd_sof_dsp_ops'
const to annotate this, make code a bit safer and allow individual
drivers to also define this structure as const.
Tested-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Add a struct sof_loadable_file_profile which can be filled by platforms
(sof-acpi-dev.c, sof-of-dev.c and sof-acpi-dev.c) to be able to use common,
generic code to handle path customization.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Pass the PCI SSID of the audio interface through to the machine driver.
This allows the machine driver to use the SSID to uniquely identify the
specific hardware configuration and apply any platform-specific
configuration.
struct snd_sof_pdata is passed around inside the SOF code, but it then
passes configuration information to the machine driver through
struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID
information has been added to both snd_sof_pdata and
snd_soc_acpi_mach_params.
PCI does not define 0x0000 as an invalid value so we can't use zero to
indicate that the struct member was not written. Instead a flag is
included to indicate that a value has been written to the
subsystem_vendor and subsystem_device members.
sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct
pci_dev so it can fill in the SSID value.
sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It
copies the SSID information across to the struct snd_soc_acpi_mach_params.
This done before calling any custom set_mach_params() so that it could be
used by the set_mach_params() callback to apply variant params.
The machine driver receives the struct snd_soc_acpi_mach as its
platform_data.
Signed-off-by: Richard Fitzgerald <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
The DSPless mode of the ASoC/SOF driver can be used for hardware
verification and debug on platforms with HDaudio codecs. The DSP mode is
still needed on existing platforms for SSP, DMIC, SoundWire interfaces
managed by the GP-DMA.
This mode is also helpful to compare the legacy HDaudio driver with the
ASoC/SOF driver wrt. codec management and handling. In theory we use the
same code but differences are sometimes seen on jack detection and event
handling.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
IPC4 based firmware supports dynamically loaded external libraries.
The libraries will be not stored alongside of the firmware or tplg files.
For intel platforms the default path will be:
intel/avs-lib|sof-ipc4-lib/<platform>/ if a community key is used on the
given machine then the libraries will be under 'community' directory, like
it is done for the firmware itself.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Chao Song <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
From current design in sof_machine_check and snd_sof_new_platform_drv,
the SOF can only support ACPI type machine.
1. In sof_machine_check if there is no ACPI machine exist, the function
will return -ENODEV directly, that's we don't expected if we do not
base on ACPI machine.
2. In snd_sof_new_platform_drv the component driver need a driver name
to do ignore_machine, currently the driver name is obtained from
machine->drv_name, and the type of machine is snd_soc_acpi_mach.
So we add a new function named sof_of_machine_select that we can pass
sof_machine_check and obtain info required by snd_sof_new_platform_drv.
Signed-off-by: Chunxu Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Now that we start having multiple platforms with minor variants, the
use of the const qualifier for 'dsp_ops' is starting to be
sub-optimal: the structures are copied across platforms, with only a
couple of members that differ.
This patch removes the const qualifier without any functionality
changes, and adds an optional initialization callback. In follow-up
patches, the dsp_ops will revisited for Intel HDaudio platforms, with
the differences added programmatically over a common baseline.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
This patch adds a default IPC type for each platform, along with file
paths to be used for each IPC type. To make reviews simpler, we only
modify platform descriptors in this table, the information will be
used in the next patch.
The Intel IPCv4 is only supported on Intel platforms after APL, and
not by default. In follow-up patches, support for SKL and KBL will be
added, and in those two cases the IPCv4 will be the default (and only
supported mode).
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
With the addition of the IPCv4, we need the ability to select
different paths for firmware and topologies.
First add an indirection. Follow-up patches will add mechanisms to
select a default IPC or override it.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Add enum type to allow for different types of IPCs. The IPCv4 is
intended for Intel only as a convergence path with firmware used in
Windows. Follow-up patches will introduce different abstractions with
.ops and different search paths for firmware and topology files.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Add helper sof_dai_ssp_mclk to get the topology configured MCLK from a
pcm_runtime, return 0 if it is not available, and error if the dai type
is not SSP at the moment.
Export the helper for external use, e.g. from machine drivers.
Signed-off-by: Keyon Jie <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
The ignore_machine field in the component driver is used to
ignore the FE DAI links defined in the machine driver,
override BE fixups and set the stream names for the
DAI links defined in the machine driver. This is required
to make SOF compatible with the legacy machine drivers.
In the case of the nocodec machine driver in SOF, there is
no need to rely upon this ignore_machine logic in the core.
Modify the machine driver to set DAI link stream names and the
BE hw_params_fixup callback appropriately.
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
It makes possible to provide extra information to host
before downloading firmware. Extra data should be put
at the beginning of firmware binary.
Exchange is done without any effort on DSP side.
This mechanism will be used in extended manifest.
Signed-off-by: Karol Trzcinski <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
The current structures are not well designed. We include Xtensa
information from the ACPI and PCI levels, but at the Kconfig/module
level everything Xtensa related is included at the sof/intel level.
Move the arch_ops under ops so that Xtensa is hidden in the DSP ops,
with a structure that follows the Kconfig/module partition.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Currently the FW filename is obtained from the ACPI matching
table when determining which machine driver to use. In
preparation for making the machine driver ACPI match optional
for Device Tree platforms and moving the machine driver selection
out of the SOF core, this patch introduces the default_fw_filename
member in struct sof_dev_desc.
Once the machine driver selection is moved out of SOF core,
the nocodec_fw_filename will become obsolete and will be removed.
Signed-off-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Daniel Baluta <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
For cases where an interface can be pin-muxed, we need to assess at
probe time which configuration should be used. In cases such as
SoundWire, we need to maintain an alternate list of machines and walk
through them when the primary detection based on ACPI _HID fails.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Add a simple "fallback" machine driver that can be used to enable SOF
on boards with no codec device. This machine driver can also be forced
for debug/development.
Signed-off-by: Keyon Jie <[email protected]>
Signed-off-by: Liam Girdwood <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
The Sound Open Firmware driver core is a generic architecture
independent layer that allows SOF to be used on many different
architectures and platforms. It abstracts DSP operations and IO
methods so that the target DSP can be an internal memory mapped or
external SPI or I2C based device. This abstraction also allows SOF to
be run on many different VMs on the same physical HW.
SOF also requires some data in ASoC PCM runtime data for looking up
SOF data during ASoC PCM operations.
Signed-off-by: Liam Girdwood <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Peter Ujfalusi