phy: rockchip: Add Samsung MIPI D-/C-PHY driver

Add driver for the MIPI D-/C-PHY block based around a Samsung IP-block
that is for example needed to drive a MIPI DSI output on rk3588.

Right now only the D-PHY portion is implemented, with the C-PHY part
needing separate work.

Tested-by: Daniel Semkowicz <[email protected]>
Tested-by: Sebastian Reichel <[email protected]>
Tested-by: Quentin Schulz <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>

drivers/phy/rockchip/Kconfig

@@ -83,6 +83,18 @@ config PHY_ROCKCHIP_PCIE
 	help
 	  Enable this to support the Rockchip PCIe PHY.
 
+config PHY_ROCKCHIP_SAMSUNG_DCPHY
+	tristate "Rockchip Samsung MIPI DCPHY driver"
+	depends on (ARCH_ROCKCHIP || COMPILE_TEST)
+	select GENERIC_PHY
+	select GENERIC_PHY_MIPI_DPHY
+	help
+	  Enable this to support the Rockchip MIPI DCPHY with
+	  Samsung IP block.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called phy-rockchip-samsung-dcphy
+
 config PHY_ROCKCHIP_SAMSUNG_HDPTX
 	tristate "Rockchip Samsung HDMI/eDP Combo PHY driver"
 	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF

drivers/phy/rockchip/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
+obj-$(CONFIG_PHY_ROCKCHIP_SAMSUNG_DCPHY)	+= phy-rockchip-samsung-dcphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_SAMSUNG_HDPTX)	+= phy-rockchip-samsung-hdptx.o
 obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
 obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o